| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Adjust the fq verify regex to the latest iproute2
Signed-off-by: Pedro Tammela <[email protected]>
Reviewed-by: Davide Caratti <[email protected]>
Acked-by: Jamal Hadi Salim <[email protected]>
Reviewed-by: Davide Caratti <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
If 'jq' is not available the taprio tests might enter an infinite loop,
use the "dependsOn" feature from tdc to check if jq is present. If it's
not the test is skipped.
Suggested-by: Davide Caratti <[email protected]>
Signed-off-by: Pedro Tammela <[email protected]>
Reviewed-by: Davide Caratti <[email protected]>
Acked-by: Jamal Hadi Salim <[email protected]>
Reviewed-by: Davide Caratti <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
On a default config + tc-testing config build, tdc will miss
all the netfilter related tests because it's missing:
CONFIG_NETFILTER=y
Signed-off-by: Pedro Tammela <[email protected]>
Reviewed-by: Davide Caratti <[email protected]>
Acked-by: Jamal Hadi Salim <[email protected]>
Reviewed-by: Davide Caratti <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
The default timeout for tests is 45sec, bench-lookups_ipv6
seems to take around 50sec when running in a VM without
HW acceleration. Give it a 2x margin and set the timeout
to 120sec.
Fixes: d1066c9c58d4 ("selftests/net: Add test/benchmark for removing MKTs")
Reviewed-by: Dmitry Safonov <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
The UDP GRO forwarding test still hard-code an arbitrary pause
to wait for the UDP listener becoming ready in background.
That causes sporadic failures depending on the host load.
Replace the sleep with the existing helper waiting for the desired
port being exposed.
Fixes: a062260a9d5f ("selftests: net: add UDP GRO forwarding self-tests")
Signed-off-by: Paolo Abeni <[email protected]>
Reviewed-by: Willem de Bruijn <[email protected]>
Link: https://lore.kernel.org/r/4d58900fb09cef42749cfcf2ad7f4b91a97d225c.1706131762.git.pabeni@redhat.com
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
The blamed commit below introduce a dependency in some net self-tests
towards a newly introduce helper script.
Such script is currently not included into the TEST_PROGS_EXTENDED list
and thus is not installed, causing failure for the relevant tests when
executed from the install dir.
Fix the issue updating the install targets.
Fixes: 3bdd9fd29cb0 ("selftests/net: synchronize udpgro tests' tx and rx connection")
Signed-off-by: Paolo Abeni <[email protected]>
Reviewed-by: Willem de Bruijn <[email protected]>
Link: https://lore.kernel.org/r/076e8758e21ff2061cc9f81640e7858df775f0a9.1706131762.git.pabeni@redhat.com
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
Several net tests requires an XDP program build under the ebpf
directory, and error out if such program is not available.
That makes running successful net test hard, let's duplicate into the
net dir the [very small] program, re-using the existing rules to build
it, and finally dropping the bogus dependency.
Signed-off-by: Paolo Abeni <[email protected]>
Reviewed-by: Willem de Bruijn <[email protected]>
Link: https://lore.kernel.org/r/28e7af7c031557f691dc8045ee41dd549dd5e74c.1706131762.git.pabeni@redhat.com
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
Still a bit unclear whether each directory should have its own
config file, but assuming they should lets add one for tcp_ao.
The following tests still fail with this config in place:
- rst_ipv4,
- rst_ipv6,
- bench-lookups_ipv6.
other 21 pass.
Fixes: d11301f65977 ("selftests/net: Add TCP-AO ICMPs accept test")
Reviewed-by: Dmitry Safonov <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
Cross-merge networking fixes after downstream PR.
No conflicts or adjacent changes.
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Paolo Abeni:
"Including fixes from bpf, netfilter and WiFi.
Jakub is doing a lot of work to include the self-tests in our CI, as a
result a significant amount of self-tests related fixes is flowing in
(and will likely continue in the next few weeks).
Current release - regressions:
- bpf: fix a kernel crash for the riscv 64 JIT
- bnxt_en: fix memory leak in bnxt_hwrm_get_rings()
- revert "net: macsec: use skb_ensure_writable_head_tail to expand
the skb"
Previous releases - regressions:
- core: fix removing a namespace with conflicting altnames
- tc/flower: fix chain template offload memory leak
- tcp:
- make sure init the accept_queue's spinlocks once
- fix autocork on CPUs with weak memory model
- udp: fix busy polling
- mlx5e:
- fix out-of-bound read in port timestamping
- fix peer flow lists corruption
- iwlwifi: fix a memory corruption
Previous releases - always broken:
- netfilter:
- nft_chain_filter: handle NETDEV_UNREGISTER for inet/ingress
basechain
- nft_limit: reject configurations that cause integer overflow
- bpf: fix bpf_xdp_adjust_tail() with XSK zero-copy mbuf, avoiding a
NULL pointer dereference upon shrinking
- llc: make llc_ui_sendmsg() more robust against bonding changes
- smc: fix illegal rmb_desc access in SMC-D connection dump
- dpll: fix pin dump crash for rebound module
- bnxt_en: fix possible crash after creating sw mqprio TCs
- hv_netvsc: calculate correct ring size when PAGE_SIZE is not 4kB
Misc:
- several self-tests fixes for better integration with the netdev CI
- added several missing modules descriptions"
* tag 'net-6.8-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (88 commits)
tsnep: Fix XDP_RING_NEED_WAKEUP for empty fill ring
tsnep: Remove FCS for XDP data path
net: fec: fix the unhandled context fault from smmu
selftests: bonding: do not test arp/ns target with mode balance-alb/tlb
fjes: fix memleaks in fjes_hw_setup
i40e: update xdp_rxq_info::frag_size for ZC enabled Rx queue
i40e: set xdp_rxq_info::frag_size
xdp: reflect tail increase for MEM_TYPE_XSK_BUFF_POOL
ice: update xdp_rxq_info::frag_size for ZC enabled Rx queue
intel: xsk: initialize skb_frag_t::bv_offset in ZC drivers
ice: remove redundant xdp_rxq_info registration
i40e: handle multi-buffer packets that are shrunk by xdp prog
ice: work on pre-XDP prog frag count
xsk: fix usage of multi-buffer BPF helpers for ZC XDP
xsk: make xsk_buff_pool responsible for clearing xdp_buff::flags
xsk: recycle buffer in case Rx queue was full
net: fill in MODULE_DESCRIPTION()s for rvu_mbox
net: fill in MODULE_DESCRIPTION()s for litex
net: fill in MODULE_DESCRIPTION()s for fsl_pq_mdio
net: fill in MODULE_DESCRIPTION()s for fec
...
|
|
One issue comes up while building selftest/landlock/fs_test on my side
(gcc 7.3/glibc-2.28/kernel-4.19).
gcc -Wall -O2 -isystem fs_test.c -lcap -o selftests/landlock/fs_test
fs_test.c:4575:9: error: initializer element is not constant
.mnt = mnt_tmp,
^~~~~~~
Signed-off-by: Hu Yadi <[email protected]>
Suggested-by: Jiao <[email protected]>
Reviewed-by: Berlin <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Fixes: 04f9070e99a4 ("selftests/landlock: Add tests for pseudo filesystems")
[mic: Factor out mount's data string and make mnt_tmp static]
Signed-off-by: Mickaël Salaün <[email protected]>
|
|
One issue comes up while building selftest/landlock/net_test on my side
(gcc 7.3/glibc-2.28/kernel-4.19).
net_test.c: In function ‘set_service’:
net_test.c:91:45: warning: implicit declaration of function ‘gettid’; [-Wimplicit-function-declaration]
"_selftests-landlock-net-tid%d-index%d", gettid(),
^~~~~~
getgid
net_test.c:(.text+0x4e0): undefined reference to `gettid'
Signed-off-by: Hu Yadi <[email protected]>
Suggested-by: Jiao <[email protected]>
Reviewed-by: Berlin <[email protected]>
Fixes: a549d055a22e ("selftests/landlock: Add network tests")
Link: https://lore.kernel.org/r/[email protected]
[mic: Cosmetic fixes]
Signed-off-by: Mickaël Salaün <[email protected]>
|
|
The prio_arp/ns tests hard code the mode to active-backup. At the same
time, The balance-alb/tlb modes do not support arp/ns target. So remove
the prio_arp/ns tests from the loop and only test active-backup mode.
Fixes: 481b56e0391e ("selftests: bonding: re-format bond option tests")
Reported-by: Jay Vosburgh <[email protected]>
Closes: https://lore.kernel.org/netdev/17415.1705965957@famine/
Signed-off-by: Hangbin Liu <[email protected]>
Acked-by: Jay Vosburgh <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Paolo Abeni <[email protected]>
|
|
Implement port for given CID as input argument instead of using
hardcoded value '1234'. This allows to run different test instances
on a single CID. Port argument is not required parameter and if it is
not set, then default value will be '1234' - thus we preserve previous
behaviour.
Signed-off-by: Arseniy Krasnov <[email protected]>
Reviewed-by: Stefano Garzarella <[email protected]>
Acked-by: Michael S. Tsirkin <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
Add tests for LSM interactions (both bpf_token_capable and bpf_token_cmd
LSM hooks) with BPF token in bpf() subsystem. Now child process passes
back token FD for parent to be able to do tests with token originating
in "wrong" userns. But we also create token in initns and check that
token LSMs don't accidentally reject BPF operations when capable()
checks pass without BPF token.
Signed-off-by: Andrii Nakryiko <[email protected]>
Signed-off-by: Alexei Starovoitov <[email protected]>
Link: https://lore.kernel.org/bpf/[email protected]
|
|
Add new subtest validating LIBBPF_BPF_TOKEN_PATH envvar semantics.
Extend existing test to validate that LIBBPF_BPF_TOKEN_PATH allows to
disable implicit BPF token creation by setting envvar to empty string.
Signed-off-by: Andrii Nakryiko <[email protected]>
Signed-off-by: Alexei Starovoitov <[email protected]>
Link: https://lore.kernel.org/bpf/[email protected]
|
|
To allow external admin authority to override default BPF FS location
(/sys/fs/bpf) for implicit BPF token creation, teach libbpf to recognize
LIBBPF_BPF_TOKEN_PATH envvar. If it is specified and user application
didn't explicitly specify bpf_token_path option, it will be treated
exactly like bpf_token_path option, overriding default /sys/fs/bpf
location and making BPF token mandatory.
Suggested-by: Alexei Starovoitov <[email protected]>
Signed-off-by: Andrii Nakryiko <[email protected]>
Signed-off-by: Alexei Starovoitov <[email protected]>
Link: https://lore.kernel.org/bpf/[email protected]
|
|
Add a test to validate libbpf's implicit BPF token creation from default
BPF FS location (/sys/fs/bpf). Also validate that disabling this
implicit BPF token creation works.
Signed-off-by: Andrii Nakryiko <[email protected]>
Signed-off-by: Alexei Starovoitov <[email protected]>
Acked-by: John Fastabend <[email protected]>
Link: https://lore.kernel.org/bpf/[email protected]
|
|
Add a few tests that attempt to load BPF object containing privileged
map, program, and the one requiring mandatory BTF uploading into the
kernel (to validate token FD propagation to BPF_BTF_LOAD command).
Signed-off-by: Andrii Nakryiko <[email protected]>
Signed-off-by: Alexei Starovoitov <[email protected]>
Acked-by: John Fastabend <[email protected]>
Link: https://lore.kernel.org/bpf/[email protected]
|
|
Add BPF token support to BPF object-level functionality.
BPF token is supported by BPF object logic either as an explicitly
provided BPF token from outside (through BPF FS path), or implicitly
(unless prevented through bpf_object_open_opts).
Implicit mode is assumed to be the most common one for user namespaced
unprivileged workloads. The assumption is that privileged container
manager sets up default BPF FS mount point at /sys/fs/bpf with BPF token
delegation options (delegate_{cmds,maps,progs,attachs} mount options).
BPF object during loading will attempt to create BPF token from
/sys/fs/bpf location, and pass it for all relevant operations
(currently, map creation, BTF load, and program load).
In this implicit mode, if BPF token creation fails due to whatever
reason (BPF FS is not mounted, or kernel doesn't support BPF token,
etc), this is not considered an error. BPF object loading sequence will
proceed with no BPF token.
In explicit BPF token mode, user provides explicitly custom BPF FS mount
point path. In such case, BPF object will attempt to create BPF token
from provided BPF FS location. If BPF token creation fails, that is
considered a critical error and BPF object load fails with an error.
Libbpf provides a way to disable implicit BPF token creation, if it
causes any troubles (BPF token is designed to be completely optional and
shouldn't cause any problems even if provided, but in the world of BPF
LSM, custom security logic can be installed that might change outcome
depending on the presence of BPF token). To disable libbpf's default BPF
token creation behavior user should provide either invalid BPF token FD
(negative), or empty bpf_token_path option.
BPF token presence can influence libbpf's feature probing, so if BPF
object has associated BPF token, feature probing is instructed to use
BPF object-specific feature detection cache and token FD.
Signed-off-by: Andrii Nakryiko <[email protected]>
Signed-off-by: Alexei Starovoitov <[email protected]>
Link: https://lore.kernel.org/bpf/[email protected]
|
|
Adjust feature probing callbacks to take into account optional token_fd.
In unprivileged contexts, some feature detectors would fail to detect
kernel support just because BPF program, BPF map, or BTF object can't be
loaded due to privileged nature of those operations. So when BPF object
is loaded with BPF token, this token should be used for feature probing.
This patch is setting support for this scenario, but we don't yet pass
non-zero token FD. This will be added in the next patch.
We also switched BPF cookie detector from using kprobe program to
tracepoint one, as tracepoint is somewhat less dangerous BPF program
type and has higher likelihood of being allowed through BPF token in the
future. This change has no effect on detection behavior.
Signed-off-by: Andrii Nakryiko <[email protected]>
Signed-off-by: Alexei Starovoitov <[email protected]>
Acked-by: John Fastabend <[email protected]>
Link: https://lore.kernel.org/bpf/[email protected]
|
|
It's quite a lot of well isolated code, so it seems like a good
candidate to move it out of libbpf.c to reduce its size.
Signed-off-by: Andrii Nakryiko <[email protected]>
Signed-off-by: Alexei Starovoitov <[email protected]>
Acked-by: John Fastabend <[email protected]>
Link: https://lore.kernel.org/bpf/[email protected]
|
|
Add feat_supported() helper that accepts feature cache instead of
bpf_object. This allows low-level code in bpf.c to not know or care
about higher-level concept of bpf_object, yet it will be able to utilize
custom feature checking in cases where BPF token might influence the
outcome.
Signed-off-by: Andrii Nakryiko <[email protected]>
Signed-off-by: Alexei Starovoitov <[email protected]>
Acked-by: John Fastabend <[email protected]>
Link: https://lore.kernel.org/bpf/[email protected]
|
|
Split a list of supported feature detectors with their corresponding
callbacks from actual cached supported/missing values. This will allow
to have more flexible per-token or per-object feature detectors in
subsequent refactorings.
Signed-off-by: Andrii Nakryiko <[email protected]>
Signed-off-by: Alexei Starovoitov <[email protected]>
Acked-by: John Fastabend <[email protected]>
Link: https://lore.kernel.org/bpf/[email protected]
|
|
Use both hex-based and string-based way to specify delegate mount
options for BPF FS.
Signed-off-by: Andrii Nakryiko <[email protected]>
Signed-off-by: Alexei Starovoitov <[email protected]>
Acked-by: John Fastabend <[email protected]>
Link: https://lore.kernel.org/bpf/[email protected]
|
|
Add a selftest that attempts to conceptually replicate intended BPF
token use cases inside user namespaced container.
Child process is forked. It is then put into its own userns and mountns.
Child creates BPF FS context object. This ensures child userns is
captured as the owning userns for this instance of BPF FS. Given setting
delegation mount options is privileged operation, we ensure that child
cannot set them.
This context is passed back to privileged parent process through Unix
socket, where parent sets up delegation options, creates, and mounts it
as a detached mount. This mount FD is passed back to the child to be
used for BPF token creation, which allows otherwise privileged BPF
operations to succeed inside userns.
We validate that all of token-enabled privileged commands (BPF_BTF_LOAD,
BPF_MAP_CREATE, and BPF_PROG_LOAD) work as intended. They should only
succeed inside the userns if a) BPF token is provided with proper
allowed sets of commands and types; and b) namespaces CAP_BPF and other
privileges are set. Lacking a) or b) should lead to -EPERM failures.
Based on suggested workflow by Christian Brauner ([0]).
[0] https://lore.kernel.org/bpf/20230704-hochverdient-lehne-eeb9eeef785e@brauner/
Signed-off-by: Andrii Nakryiko <[email protected]>
Signed-off-by: Alexei Starovoitov <[email protected]>
Link: https://lore.kernel.org/bpf/[email protected]
|
|
Wire through token_fd into bpf_prog_load().
Signed-off-by: Andrii Nakryiko <[email protected]>
Signed-off-by: Alexei Starovoitov <[email protected]>
Link: https://lore.kernel.org/bpf/[email protected]
|
|
Allow user to specify token_fd for bpf_btf_load() API that wraps
kernel's BPF_BTF_LOAD command. This allows loading BTF from unprivileged
process as long as it has BPF token allowing BPF_BTF_LOAD command, which
can be created and delegated by privileged process.
Wire through new btf_flags as well, so that user can provide
BPF_F_TOKEN_FD flag, if necessary.
Signed-off-by: Andrii Nakryiko <[email protected]>
Signed-off-by: Alexei Starovoitov <[email protected]>
Link: https://lore.kernel.org/bpf/[email protected]
|
|
Add ability to provide token_fd for BPF_MAP_CREATE command through
bpf_map_create() API.
Signed-off-by: Andrii Nakryiko <[email protected]>
Signed-off-by: Alexei Starovoitov <[email protected]>
Link: https://lore.kernel.org/bpf/[email protected]
|
|
Add low-level wrapper API for BPF_TOKEN_CREATE command in bpf() syscall.
Signed-off-by: Andrii Nakryiko <[email protected]>
Signed-off-by: Alexei Starovoitov <[email protected]>
Link: https://lore.kernel.org/bpf/[email protected]
|
|
Add basic support of BPF token to BPF_PROG_LOAD. BPF_F_TOKEN_FD flag
should be set in prog_flags field when providing prog_token_fd.
Wire through a set of allowed BPF program types and attach types,
derived from BPF FS at BPF token creation time. Then make sure we
perform bpf_token_capable() checks everywhere where it's relevant.
Signed-off-by: Andrii Nakryiko <[email protected]>
Signed-off-by: Alexei Starovoitov <[email protected]>
Link: https://lore.kernel.org/bpf/[email protected]
|
|
Accept BPF token FD in BPF_BTF_LOAD command to allow BTF data loading
through delegated BPF token. BPF_F_TOKEN_FD flag has to be specified
when passing BPF token FD. Given BPF_BTF_LOAD command didn't have flags
field before, we also add btf_flags field.
BTF loading is a pretty straightforward operation, so as long as BPF
token is created with allow_cmds granting BPF_BTF_LOAD command, kernel
proceeds to parsing BTF data and creating BTF object.
Signed-off-by: Andrii Nakryiko <[email protected]>
Signed-off-by: Alexei Starovoitov <[email protected]>
Link: https://lore.kernel.org/bpf/[email protected]
|
|
Allow providing token_fd for BPF_MAP_CREATE command to allow controlled
BPF map creation from unprivileged process through delegated BPF token.
New BPF_F_TOKEN_FD flag is added to specify together with BPF token FD
for BPF_MAP_CREATE command.
Wire through a set of allowed BPF map types to BPF token, derived from
BPF FS at BPF token creation time. This, in combination with allowed_cmds
allows to create a narrowly-focused BPF token (controlled by privileged
agent) with a restrictive set of BPF maps that application can attempt
to create.
Signed-off-by: Andrii Nakryiko <[email protected]>
Signed-off-by: Alexei Starovoitov <[email protected]>
Link: https://lore.kernel.org/bpf/[email protected]
|
|
Add new kind of BPF kernel object, BPF token. BPF token is meant to
allow delegating privileged BPF functionality, like loading a BPF
program or creating a BPF map, from privileged process to a *trusted*
unprivileged process, all while having a good amount of control over which
privileged operations could be performed using provided BPF token.
This is achieved through mounting BPF FS instance with extra delegation
mount options, which determine what operations are delegatable, and also
constraining it to the owning user namespace (as mentioned in the
previous patch).
BPF token itself is just a derivative from BPF FS and can be created
through a new bpf() syscall command, BPF_TOKEN_CREATE, which accepts BPF
FS FD, which can be attained through open() API by opening BPF FS mount
point. Currently, BPF token "inherits" delegated command, map types,
prog type, and attach type bit sets from BPF FS as is. In the future,
having an BPF token as a separate object with its own FD, we can allow
to further restrict BPF token's allowable set of things either at the
creation time or after the fact, allowing the process to guard itself
further from unintentionally trying to load undesired kind of BPF
programs. But for now we keep things simple and just copy bit sets as is.
When BPF token is created from BPF FS mount, we take reference to the
BPF super block's owning user namespace, and then use that namespace for
checking all the {CAP_BPF, CAP_PERFMON, CAP_NET_ADMIN, CAP_SYS_ADMIN}
capabilities that are normally only checked against init userns (using
capable()), but now we check them using ns_capable() instead (if BPF
token is provided). See bpf_token_capable() for details.
Such setup means that BPF token in itself is not sufficient to grant BPF
functionality. User namespaced process has to *also* have necessary
combination of capabilities inside that user namespace. So while
previously CAP_BPF was useless when granted within user namespace, now
it gains a meaning and allows container managers and sys admins to have
a flexible control over which processes can and need to use BPF
functionality within the user namespace (i.e., container in practice).
And BPF FS delegation mount options and derived BPF tokens serve as
a per-container "flag" to grant overall ability to use bpf() (plus further
restrict on which parts of bpf() syscalls are treated as namespaced).
Note also, BPF_TOKEN_CREATE command itself requires ns_capable(CAP_BPF)
within the BPF FS owning user namespace, rounding up the ns_capable()
story of BPF token. Also creating BPF token in init user namespace is
currently not supported, given BPF token doesn't have any effect in init
user namespace anyways.
Signed-off-by: Andrii Nakryiko <[email protected]>
Signed-off-by: Alexei Starovoitov <[email protected]>
Acked-by: Christian Brauner <[email protected]>
Link: https://lore.kernel.org/bpf/[email protected]
|
|
The commit 9e926acda0c2 ("libbpf: Find correct module BTFs for struct_ops maps and progs.")
sets a newly added field (value_type_btf_obj_fd) to -1 in libbpf when
the caller of the libbpf's bpf_map_create did not define this field by
passing a NULL "opts" or passing in a "opts" that does not cover this
new field. OPT_HAS(opts, field) is used to decide if the field is
defined or not:
((opts) && opts->sz >= offsetofend(typeof(*(opts)), field))
Once OPTS_HAS decided the field is not defined, that field should
be set to 0. For this particular new field (value_type_btf_obj_fd),
its corresponding map_flags "BPF_F_VTYPE_BTF_OBJ_FD" is not set.
Thus, the kernel does not treat it as an fd field.
Fixes: 9e926acda0c2 ("libbpf: Find correct module BTFs for struct_ops maps and progs.")
Reported-by: Andrii Nakryiko <[email protected]>
Signed-off-by: Martin KaFai Lau <[email protected]>
Signed-off-by: Andrii Nakryiko <[email protected]>
Link: https://lore.kernel.org/bpf/[email protected]
Signed-off-by: Alexei Starovoitov <[email protected]>
|
|
This test is missing a whole bunch of checks for interface
renaming and one ifup. Presumably it was only used on a system
with renaming disabled and NetworkManager running.
Fixes: 91f430b2c49d ("selftests: net: add a test for UDP tunnel info infra")
Acked-by: Paolo Abeni <[email protected]>
Reviewed-by: Simon Horman <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
If there is more than 32 cpus the bitmask will start to contain
commas, leading to:
./rps_default_mask.sh: line 36: [: 00000000,00000000: integer expression expected
Remove the commas, bash doesn't interpret leading zeroes as oct
so that should be good enough. Switch to bash, Simon reports that
not all shells support this type of substitution.
Fixes: c12e0d5f267d ("self-tests: introduce self-tests for RPS default mask")
Reviewed-by: Simon Horman <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
After the previous patch that speeded up the test (by avoiding neigh
discovery in IPv6), the BPF CI occasionally hits this error:
rcv tstamp unexpected pkt rcv tstamp: actual 0 == expected 0
The test complains about the cmsg returned from the recvmsg() does not
have the rcv timestamp. Setting skb->tstamp or not is
controlled by a kernel static key "netstamp_needed_key". The static
key is enabled whenever this is at least one sk with the SOCK_TIMESTAMP
set.
The test_redirect_dtime does use setsockopt() to turn on
the SOCK_TIMESTAMP for the reading sk. In the kernel
net_enable_timestamp() has a delay to enable the "netstamp_needed_key"
when CONFIG_JUMP_LABEL is set. This potential delay is the likely reason
for packet missing rcv timestamp occasionally.
This patch is to create udp sockets with SOCK_TIMESTAMP set.
It sends and receives some packets until the received packet
has a rcv timestamp. It currently retries at most 5 times with 1s
in between. This should be enough to wait for the "netstamp_needed_key".
It then holds on to the socket and only closes it at the end of the test.
This guarantees that the test has the "netstamp_needed_key" key turned
on from the beginning.
To simplify the udp sockets setup, they are sending/receiving packets
in the same netns (ns_dst is used) and communicate over the "lo" dev.
Hence, the patch enables the "lo" dev in the ns_dst.
Fixes: c803475fd8dd ("bpf: selftests: test skb->tstamp in redirect_neigh")
Signed-off-by: Martin KaFai Lau <[email protected]>
Signed-off-by: Andrii Nakryiko <[email protected]>
Link: https://lore.kernel.org/bpf/[email protected]
|
|
BPF CI has been reporting the tc_redirect_dtime test failing
from time to time:
test_inet_dtime:PASS:setns src 0 nsec
(network_helpers.c:253: errno: No route to host) Failed to connect to server
close_netns:PASS:setns 0 nsec
test_inet_dtime:FAIL:connect_to_fd unexpected connect_to_fd: actual -1 < expected 0
test_tcp_clear_dtime:PASS:tcp ip6 clear dtime ingress_fwdns_p100 0 nsec
The connect_to_fd failure (EHOSTUNREACH) is from the
test_tcp_clear_dtime() test and it is the very first IPv6 traffic
after setting up all the links, addresses, and routes.
The symptom is this first connect() is always slow. In my setup, it
could take ~3s.
After some tracing and tcpdump, the slowness is mostly spent in
the neighbor solicitation in the "ns_fwd" namespace while
the "ns_src" and "ns_dst" are fine.
I forced the kernel to drop the neighbor solicitation messages.
I can then reproduce EHOSTUNREACH. What actually happen could be:
- the neighbor advertisement came back a little slow.
- the "ns_fwd" namespace concluded a neighbor discovery failure
and triggered the ndisc_error_report() => ip6_link_failure() =>
icmpv6_send(skb, ICMPV6_DEST_UNREACH, ICMPV6_ADDR_UNREACH, 0)
- the client's connect() reports EHOSTUNREACH after receiving
the ICMPV6_DEST_UNREACH message.
The neigh table of both "ns_src" and "ns_dst" namespace has already
been manually populated but not the "ns_fwd" namespace. This patch
fixes it by manually populating the neigh table also in the "ns_fwd"
namespace.
Although the namespace configuration part had been existed before
the tc_redirect_dtime test, still Fixes-tagging the patch when
the tc_redirect_dtime test was added since it is the only test
hitting it so far.
Fixes: c803475fd8dd ("bpf: selftests: test skb->tstamp in redirect_neigh")
Signed-off-by: Martin KaFai Lau <[email protected]>
Signed-off-by: Andrii Nakryiko <[email protected]>
Link: https://lore.kernel.org/bpf/[email protected]
|
|
Past commit ([0]) removed the last vestiges of struct bpf_field_reloc,
it's called struct bpf_core_relo now.
[0] 28b93c64499a ("libbpf: Clean up and improve CO-RE reloc logging")
Signed-off-by: Dima Tisnek <[email protected]>
Signed-off-by: Andrii Nakryiko <[email protected]>
Acked-by: Yonghong Song <[email protected]>
Link: https://lore.kernel.org/bpf/[email protected]
|
|
If CONFIG_BPF_JIT_ALWAYS_ON is not set and bpf_jit_enable is 0, there
exist 6 failed tests.
[root@linux bpf]# echo 0 > /proc/sys/net/core/bpf_jit_enable
[root@linux bpf]# echo 0 > /proc/sys/kernel/unprivileged_bpf_disabled
[root@linux bpf]# ./test_verifier | grep FAIL
#106/p inline simple bpf_loop call FAIL
#107/p don't inline bpf_loop call, flags non-zero FAIL
#108/p don't inline bpf_loop call, callback non-constant FAIL
#109/p bpf_loop_inline and a dead func FAIL
#110/p bpf_loop_inline stack locations for loop vars FAIL
#111/p inline bpf_loop call in a big program FAIL
Summary: 768 PASSED, 15 SKIPPED, 6 FAILED
The test log shows that callbacks are not allowed in non-JITed programs,
interpreter doesn't support them yet, thus these tests should be skipped
if jit is disabled.
Add an explicit flag F_NEEDS_JIT_ENABLED to those tests to mark that they
require JIT enabled in bpf_loop_inline.c, check the flag and jit_disabled
at the beginning of do_test_single() to handle this case.
With this patch:
[root@linux bpf]# echo 0 > /proc/sys/net/core/bpf_jit_enable
[root@linux bpf]# echo 0 > /proc/sys/kernel/unprivileged_bpf_disabled
[root@linux bpf]# ./test_verifier | grep FAIL
Summary: 768 PASSED, 21 SKIPPED, 0 FAILED
Suggested-by: Andrii Nakryiko <[email protected]>
Signed-off-by: Tiezhu Yang <[email protected]>
Signed-off-by: Andrii Nakryiko <[email protected]>
Link: https://lore.kernel.org/bpf/[email protected]
|
|
Currently, is_jit_enabled() is only used in test_progs, move it into
testing_helpers so that it can be used in test_verifier. While at it,
remove the second argument "0" of open() as Hou Tao suggested.
Signed-off-by: Tiezhu Yang <[email protected]>
Signed-off-by: Andrii Nakryiko <[email protected]>
Acked-by: Hou Tao <[email protected]>
Acked-by: Song Liu <[email protected]>
Link: https://lore.kernel.org/bpf/[email protected]
|
|
We are missing a lot of config options from net selftests,
it seems:
tun/tap: CONFIG_TUN, CONFIG_MACVLAN, CONFIG_MACVTAP
fib_tests: CONFIG_NET_SCH_FQ_CODEL
l2tp: CONFIG_L2TP, CONFIG_L2TP_V3, CONFIG_L2TP_IP, CONFIG_L2TP_ETH
sctp-vrf: CONFIG_INET_DIAG
txtimestamp: CONFIG_NET_CLS_U32
vxlan_mdb: CONFIG_BRIDGE_VLAN_FILTERING
gre_gso: CONFIG_NET_IPGRE_DEMUX, CONFIG_IP_GRE, CONFIG_IPV6_GRE
srv6_end_dt*_l3vpn: CONFIG_IPV6_SEG6_LWTUNNEL
ip_local_port_range: CONFIG_MPTCP
fib_test: CONFIG_NET_CLS_BASIC
rtnetlink: CONFIG_MACSEC, CONFIG_NET_SCH_HTB, CONFIG_XFRM_INTERFACE
CONFIG_NET_IPGRE, CONFIG_BONDING
fib_nexthops: CONFIG_MPLS, CONFIG_MPLS_ROUTING
vxlan_mdb: CONFIG_NET_ACT_GACT
tls: CONFIG_TLS, CONFIG_CRYPTO_CHACHA20POLY1305
psample: CONFIG_PSAMPLE
fcnal: CONFIG_TCP_MD5SIG
Try to add them in a semi-alphabetical order.
Fixes: 62199e3f1658 ("selftests: net: Add VXLAN MDB test")
Fixes: c12e0d5f267d ("self-tests: introduce self-tests for RPS default mask")
Fixes: 122db5e3634b ("selftests/net: add MPTCP coverage for IP_LOCAL_PORT_RANGE")
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
Create a new struct_ops type called bpf_testmod_ops within the bpf_testmod
module. When a struct_ops object is registered, the bpf_testmod module will
invoke test_2 from the module.
Signed-off-by: Kui-Feng Lee <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Martin KaFai Lau <[email protected]>
|
|
Locate the module BTFs for struct_ops maps and progs and pass them to the
kernel. This ensures that the kernel correctly resolves type IDs from the
appropriate module BTFs.
For the map of a struct_ops object, the FD of the module BTF is set to
bpf_map to keep a reference to the module BTF. The FD is passed to the
kernel as value_type_btf_obj_fd when the struct_ops object is loaded.
For a bpf_struct_ops prog, attach_btf_obj_fd of bpf_prog is the FD of a
module BTF in the kernel.
Signed-off-by: Kui-Feng Lee <[email protected]>
Acked-by: Andrii Nakryiko <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Martin KaFai Lau <[email protected]>
|
|
Pass the fd of a btf from the userspace to the bpf() syscall, and then
convert the fd into a btf. The btf is generated from the module that
defines the target BPF struct_ops type.
In order to inform the kernel about the module that defines the target
struct_ops type, the userspace program needs to provide a btf fd for the
respective module's btf. This btf contains essential information on the
types defined within the module, including the target struct_ops type.
A btf fd must be provided to the kernel for struct_ops maps and for the bpf
programs attached to those maps.
In the case of the bpf programs, the attach_btf_obj_fd parameter is passed
as part of the bpf_attr and is converted into a btf. This btf is then
stored in the prog->aux->attach_btf field. Here, it just let the verifier
access attach_btf directly.
In the case of struct_ops maps, a btf fd is passed as value_type_btf_obj_fd
of bpf_attr. The bpf_struct_ops_map_alloc() function converts the fd to a
btf and stores it as st_map->btf. A flag BPF_F_VTYPE_BTF_OBJ_FD is added
for map_flags to indicate that the value of value_type_btf_obj_fd is set.
Signed-off-by: Kui-Feng Lee <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Martin KaFai Lau <[email protected]>
|
|
Include btf object id (btf_obj_id) in bpf_map_info so that tools (ex:
bpftools struct_ops dump) know the correct btf from the kernel to look up
type information of struct_ops types.
Since struct_ops types can be defined and registered in a module. The
type information of a struct_ops type are defined in the btf of the
module defining it. The userspace tools need to know which btf is for
the module defining a struct_ops type.
Signed-off-by: Kui-Feng Lee <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Martin KaFai Lau <[email protected]>
|
|
Displaying cookies for kprobe multi link, in plain mode:
# bpftool link
...
1397: kprobe_multi prog 47532
kretprobe.multi func_cnt 3
addr cookie func [module]
ffffffff82b370c0 3 bpf_fentry_test1
ffffffff82b39780 1 bpf_fentry_test2
ffffffff82b397a0 2 bpf_fentry_test3
And in json mode:
# bpftool link -j | jq
...
{
"id": 1397,
"type": "kprobe_multi",
"prog_id": 47532,
"retprobe": true,
"func_cnt": 3,
"missed": 0,
"funcs": [
{
"addr": 18446744071607382208,
"func": "bpf_fentry_test1",
"module": null,
"cookie": 3
},
{
"addr": 18446744071607392128,
"func": "bpf_fentry_test2",
"module": null,
"cookie": 1
},
{
"addr": 18446744071607392160,
"func": "bpf_fentry_test3",
"module": null,
"cookie": 2
}
]
}
Cookie is attached to specific address, and because we sort addresses
before printing, we need to sort cookies the same way, hence adding
the struct addr_cookie to keep and sort them together.
Also adding missing dd.sym_count check to show_kprobe_multi_json.
Signed-off-by: Jiri Olsa <[email protected]>
Acked-by: Song Liu <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Alexei Starovoitov <[email protected]>
|
|
Displaying cookie for perf event link probes, in plain mode:
# bpftool link
17: perf_event prog 90
kprobe ffffffff82b1c2b0 bpf_fentry_test1 cookie 3735928559
18: perf_event prog 90
kretprobe ffffffff82b1c2b0 bpf_fentry_test1 cookie 3735928559
20: perf_event prog 92
tracepoint sched_switch cookie 3735928559
21: perf_event prog 93
event software:page-faults cookie 3735928559
22: perf_event prog 91
uprobe /proc/self/exe+0xd703c cookie 3735928559
And in json mode:
# bpftool link -j | jq
{
"id": 30,
"type": "perf_event",
"prog_id": 160,
"retprobe": false,
"addr": 18446744071607272112,
"func": "bpf_fentry_test1",
"offset": 0,
"missed": 0,
"cookie": 3735928559
}
{
"id": 33,
"type": "perf_event",
"prog_id": 162,
"tracepoint": "sched_switch",
"cookie": 3735928559
}
{
"id": 34,
"type": "perf_event",
"prog_id": 163,
"event_type": "software",
"event_config": "page-faults",
"cookie": 3735928559
}
{
"id": 35,
"type": "perf_event",
"prog_id": 161,
"retprobe": false,
"file": "/proc/self/exe",
"offset": 880700,
"cookie": 3735928559
}
Reviewed-by: Quentin Monnet <[email protected]>
Signed-off-by: Jiri Olsa <[email protected]>
Acked-by: Song Liu <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Alexei Starovoitov <[email protected]>
|
|
Adding fill_link_info test for perf event and testing we
get its values back through the bpf_link_info interface.
Signed-off-by: Jiri Olsa <[email protected]>
Acked-by: Song Liu <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Alexei Starovoitov <[email protected]>
|