| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fixes from Thomas Gleixner:
"A series of fixes for x86:
- Reset MXCSR in kernel_fpu_begin() to prevent using a stale user
space value.
- Prevent writing MSR_TEST_CTRL on CPUs which are not explicitly
whitelisted for split lock detection. Some CPUs which do not
support it crash even when the MSR is written to 0 which is the
default value.
- Fix the XEN PV fallout of the entry code rework
- Fix the 32bit fallout of the entry code rework
- Add more selftests to ensure that these entry problems don't come
back.
- Disable 16 bit segments on XEN PV. It's not supported because XEN
PV does not implement ESPFIX64"
* tag 'x86-urgent-2020-07-05' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/ldt: Disable 16-bit segments on Xen PV
x86/entry/32: Fix #MC and #DB wiring on x86_32
x86/entry/xen: Route #DB correctly on Xen PV
x86/entry, selftests: Further improve user entry sanity checks
x86/entry/compat: Clear RAX high bits on Xen PV SYSENTER
selftests/x86: Consolidate and fix get/set_eflags() helpers
selftests/x86/syscall_nt: Clear weird flags after each test
selftests/x86/syscall_nt: Add more flag combinations
x86/entry/64/compat: Fix Xen PV SYSENTER frame setup
x86/entry: Move SYSENTER's regs->sp and regs->flags fixups into C
x86/entry: Assert that syscalls are on the right stack
x86/split_lock: Don't write MSR_TEST_CTRL on CPUs that aren't whitelisted
x86/fpu: Reset MXCSR to default in kernel_fpu_begin()
|
|
Chasing down a Xen bug caused me to realize that the new entry sanity
checks are still fairly weak. Add some more checks.
Signed-off-by: Andy Lutomirski <[email protected]>
Signed-off-by: Thomas Gleixner <[email protected]>
Acked-by: Peter Zijlstra (Intel) <[email protected]>
Link: https://lkml.kernel.org/r/881de09e786ab93ce56ee4a2437ba2c308afe7a9.1593795633.git.luto@kernel.org
|
|
Kernel commit dc4e2801d400 (ring-buffer: Redefine the unimplemented
RINGBUF_TYPE_TIME_STAMP) changed the way the ring buffer timestamps work
- after that commit the previously unimplemented RINGBUF_TYPE_TIME_STAMP
type causes the time delta to be used as a timestamp rather than a delta
to be added to the timestamp.
The trace-cmd code didn't get updated to handle this, so misinterprets
the event data for this case, which causes a cascade of errors,
including trace-report not being able to identify synthetic (or any
other) events generated by the histogram code (which uses TIME_STAMP
mode). For example, the following triggers along with the trace-cmd
shown cause an UNKNOWN_EVENT error and trace-cmd report crash:
# echo 'wakeup_latency u64 lat pid_t pid char comm[16]' > /sys/kernel/debug/tracing/synthetic_events
# echo 'hist:keys=pid:ts0=common_timestamp.usecs if comm=="ping"' > /sys/kernel/debug/tracing/events/sched/sched_wakeup/trigger
# echo 'hist:keys=next_pid:wakeup_lat=common_timestamp.usecs-$ts0:onmatch(sched.sched_wakeup).trace(wakeup_latency,$wakeup_lat,next_pid,next_comm) if next_comm=="ping"' > /sys/kernel/debug/tracing/events/sched/sched_switch/trigger
# echo 'hist:keys=comm,pid,lat:wakeup_lat=lat:sort=lat' > /sys/kernel/debug/tracing/events/synthetic/wakeup_latency/trigger
# trace-cmd record -e wakeup_latency -e sched_wakeup -f comm==\"ping\" ping localhost -c 5
# trace-cmd report
CPU 0 is empty
CPU 1 is empty
CPU 2 is empty
CPU 3 is empty
CPU 5 is empty
CPU 6 is empty
CPU 7 is empty
cpus=8
ug! no event found for type 0
[UNKNOWN TYPE 0]
ug! no event found for type 11520
Segmentation fault (core dumped)
After this patch we get the correct interpretation and the events are
shown properly:
# trace-cmd report
CPU 0 is empty
CPU 1 is empty
CPU 2 is empty
CPU 3 is empty
CPU 5 is empty
CPU 6 is empty
CPU 7 is empty
cpus=8
<idle>-0 [004] 23284.341392: sched_wakeup: ping:12031 [120] success=1 CPU:004
<idle>-0 [004] 23284.341464: wakeup_latency: lat=58, pid=12031, comm=ping
<idle>-0 [004] 23285.365303: sched_wakeup: ping:12031 [120] success=1 CPU:004
<idle>-0 [004] 23285.365382: wakeup_latency: lat=64, pid=12031, comm=ping
<idle>-0 [004] 23286.389290: sched_wakeup: ping:12031 [120] success=1 CPU:004
<idle>-0 [004] 23286.389378: wakeup_latency: lat=72, pid=12031, comm=ping
<idle>-0 [004] 23287.413213: sched_wakeup: ping:12031 [120] success=1 CPU:004
<idle>-0 [004] 23287.413291: wakeup_latency: lat=64, pid=12031, comm=ping
Link: http://lkml.kernel.org/r/[email protected]
Link: http://lore.kernel.org/linux-trace-devel/[email protected]
Signed-off-by: Tom Zanussi <[email protected]>
[ Ported from trace-cmd.git ]
Cc: Andrew Morton <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: [email protected]
Link: http://lore.kernel.org/lkml/[email protected]
Signed-off-by: Tzvetomir Stoyanov (VMware) <[email protected]>
Signed-off-by: Steven Rostedt (VMware) <[email protected]>
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
Add the functions kbuffer_subbuf_timestamp() and kbuffer_ptr_delta() to
get the timing data stored in the ring buffer that is used to produced
the time stamps of the records.
This is useful for tools like trace-cmd to be able to display the
content of the read data to understand why the records show the time
stamps that they do.
Link: http://lore.kernel.org/linux-trace-devel/[email protected]
Signed-off-by: Steven Rostedt (VMware) <[email protected]>
[ Ported from trace-cmd.git ]
Cc: Andrew Morton <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: [email protected]
Link: http://lore.kernel.org/lkml/[email protected]
Signed-off-by: Tzvetomir Stoyanov (VMware) <[email protected]>
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
Using Python version 3.8.2 and PySide2 version 5.14.0, time chart call tree
would not expand the tree to the result. Fix by using setExpanded().
Example:
$ perf record -e intel_pt//u uname
Linux
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.034 MB perf.data ]
$ perf script --itrace=bep -s ~/libexec/perf-core/scripts/python/export-to-sqlite.py perf.data.db branches calls
2020-06-26 15:32:14.928997 Creating database ...
2020-06-26 15:32:14.933971 Writing records...
2020-06-26 15:32:15.535251 Adding indexes
2020-06-26 15:32:15.542993 Dropping unused tables
2020-06-26 15:32:15.549716 Done
$ python3 ~/libexec/perf-core/scripts/python/exported-sql-viewer.py perf.data.db
Select: Charts -> Time chart by CPU
Move mouse over middle of chart
Right-click and select Show Call Tree
Before: displays Call Tree but not expanded to selected time
After: displays Call Tree expanded to selected time
Fixes: e69d5df75d74d ("perf scripts python: exported-sql-viewer.py: Add ability for Call tree to open at a specified task and time")
Signed-off-by: Adrian Hunter <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: [email protected]
Link: http://lore.kernel.org/lkml/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
result
Using ctrl-F ('Find') would not find 'unknown' because it matches id
zero. Fix by excluding id zero from selection.
Example:
$ perf record -e intel_pt//u uname
Linux
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.034 MB perf.data ]
$ perf script --itrace=bep -s ~/libexec/perf-core/scripts/python/export-to-sqlite.py perf.data.db branches calls
2020-06-26 15:32:14.928997 Creating database ...
2020-06-26 15:32:14.933971 Writing records...
2020-06-26 15:32:15.535251 Adding indexes
2020-06-26 15:32:15.542993 Dropping unused tables
2020-06-26 15:32:15.549716 Done
$ python3 ~/libexec/perf-core/scripts/python/exported-sql-viewer.py perf.data.db
Select: Reports -> Call Tree
Press: Ctrl-F
Enter: unknown
Press: Enter
Before: displays 'unknown' not found
After: tree is expanded to line showing 'unknown'
Fixes: ae8b887c00d3f ("perf scripts python: exported-sql-viewer.py: Add call tree")
Signed-off-by: Adrian Hunter <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: [email protected]
Link: http://lore.kernel.org/lkml/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
'Find' result
Using ctrl-F ('Find') would not find 'unknown' because it matches id zero.
Fix by excluding id zero from selection.
Example:
$ perf record -e intel_pt//u uname
Linux
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.034 MB perf.data ]
$ perf script --itrace=bep -s ~/libexec/perf-core/scripts/python/export-to-sqlite.py perf.data.db branches calls
2020-06-26 15:32:14.928997 Creating database ...
2020-06-26 15:32:14.933971 Writing records...
2020-06-26 15:32:15.535251 Adding indexes
2020-06-26 15:32:15.542993 Dropping unused tables
2020-06-26 15:32:15.549716 Done
$ python3 ~/libexec/perf-core/scripts/python/exported-sql-viewer.py perf.data.db
Select: Reports -> Context-Sensitive Call Graph
Press: Ctrl-F
Enter: unknown
Press: Enter
Before: gets stuck
After: tree is expanded to line showing 'unknown'
Fixes: 254c0d820b86d ("perf scripts python: exported-sql-viewer.py: Factor out CallGraphModelBase")
Signed-off-by: Adrian Hunter <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: [email protected]
Link: http://lore.kernel.org/lkml/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
Using Python version 3.8.2 and PySide2 version 5.14.0, ctrl-F ('Find')
would not expand the tree to the result. Fix by using setExpanded().
Example:
$ perf record -e intel_pt//u uname
Linux
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.034 MB perf.data ]
$ perf script --itrace=bep -s ~/libexec/perf-core/scripts/python/export-to-sqlite.py perf.data.db branches calls
2020-06-26 15:32:14.928997 Creating database ...
2020-06-26 15:32:14.933971 Writing records...
2020-06-26 15:32:15.535251 Adding indexes
2020-06-26 15:32:15.542993 Dropping unused tables
2020-06-26 15:32:15.549716 Done
$ python3 ~/libexec/perf-core/scripts/python/exported-sql-viewer.py perf.data.db
Select: Reports -> Context-Sensitive Call Graph or Reports -> Call Tree
Press: Ctrl-F
Enter: main
Press: Enter
Before: line showing 'main' does not display
After: tree is expanded to line showing 'main'
Fixes: ebd70c7dc2f5f ("perf scripts python: exported-sql-viewer.py: Add ability to find symbols in the call-graph")
Signed-off-by: Adrian Hunter <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: [email protected]
Link: http://lore.kernel.org/lkml/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
Commit 0a892c1c9472 ("perf record: Add dummy event during system wide
synthesis") reveals an issue with Intel PT system wide tracing.
Specifically that Intel PT already adds a dummy tracking event, and it
is not the first event. Adding another dummy tracking event causes
duplicated sideband events. Fix by checking for an existing dummy
tracking event first.
Example showing duplicated switch events:
Before:
# perf record -a -e intel_pt//u uname
Linux
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.895 MB perf.data ]
# perf script --no-itrace --show-switch-events | head
swapper 0 [007] 6390.516222: PERF_RECORD_SWITCH_CPU_WIDE OUT preempt next pid/tid: 11/11
swapper 0 [007] 6390.516222: PERF_RECORD_SWITCH_CPU_WIDE OUT preempt next pid/tid: 11/11
rcu_sched 11 [007] 6390.516223: PERF_RECORD_SWITCH_CPU_WIDE IN prev pid/tid: 0/0
rcu_sched 11 [007] 6390.516224: PERF_RECORD_SWITCH_CPU_WIDE IN prev pid/tid: 0/0
rcu_sched 11 [007] 6390.516227: PERF_RECORD_SWITCH_CPU_WIDE OUT next pid/tid: 0/0
rcu_sched 11 [007] 6390.516227: PERF_RECORD_SWITCH_CPU_WIDE OUT next pid/tid: 0/0
swapper 0 [007] 6390.516228: PERF_RECORD_SWITCH_CPU_WIDE IN prev pid/tid: 11/11
swapper 0 [007] 6390.516228: PERF_RECORD_SWITCH_CPU_WIDE IN prev pid/tid: 11/11
swapper 0 [002] 6390.516415: PERF_RECORD_SWITCH_CPU_WIDE OUT preempt next pid/tid: 5556/5559
swapper 0 [002] 6390.516416: PERF_RECORD_SWITCH_CPU_WIDE OUT preempt next pid/tid: 5556/5559
After:
# perf record -a -e intel_pt//u uname
Linux
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.868 MB perf.data ]
# perf script --no-itrace --show-switch-events | head
swapper 0 [005] 6450.567013: PERF_RECORD_SWITCH_CPU_WIDE OUT preempt next pid/tid: 7179/7181
perf 7181 [005] 6450.567014: PERF_RECORD_SWITCH_CPU_WIDE IN prev pid/tid: 0/0
perf 7181 [005] 6450.567028: PERF_RECORD_SWITCH_CPU_WIDE OUT next pid/tid: 0/0
swapper 0 [005] 6450.567029: PERF_RECORD_SWITCH_CPU_WIDE IN prev pid/tid: 7179/7181
swapper 0 [005] 6450.571699: PERF_RECORD_SWITCH_CPU_WIDE OUT preempt next pid/tid: 11/11
rcu_sched 11 [005] 6450.571700: PERF_RECORD_SWITCH_CPU_WIDE IN prev pid/tid: 0/0
rcu_sched 11 [005] 6450.571702: PERF_RECORD_SWITCH_CPU_WIDE OUT next pid/tid: 0/0
swapper 0 [005] 6450.571703: PERF_RECORD_SWITCH_CPU_WIDE IN prev pid/tid: 11/11
swapper 0 [005] 6450.579703: PERF_RECORD_SWITCH_CPU_WIDE OUT preempt next pid/tid: 11/11
rcu_sched 11 [005] 6450.579704: PERF_RECORD_SWITCH_CPU_WIDE IN prev pid/tid: 0/0
Signed-off-by: Adrian Hunter <[email protected]>
Tested-by: Arnaldo Carvalho de Melo <[email protected]>
Cc: Jiri Olsa <[email protected]>
Link: http://lore.kernel.org/lkml/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
Python 3.8 is requiring that arguments being packed as integers are also
integers. Add int() accordingly.
Before:
$ perf record -e intel_pt//u uname
$ perf script --itrace=bep -s ~/libexec/perf-core/scripts/python/export-to-postgresql.py perf_data_db branches calls
2020-06-25 16:09:10.547256 Creating database...
2020-06-25 16:09:10.733185 Writing to intermediate files...
Traceback (most recent call last):
File "/home/ahunter/libexec/perf-core/scripts/python/export-to-postgresql.py", line 1106, in synth_data
cbr(id, raw_buf)
File "/home/ahunter/libexec/perf-core/scripts/python/export-to-postgresql.py", line 1058, in cbr
value = struct.pack("!hiqiiiiii", 4, 8, id, 4, cbr, 4, MHz, 4, percent)
struct.error: required argument is not an integer
Fatal Python error: problem in Python trace event handler
Python runtime state: initialized
Current thread 0x00007f35d3695780 (most recent call first):
<no Python frame>
Aborted (core dumped)
After:
$ dropdb perf_data_db
$ rm -rf perf_data_db-perf-data
$ perf script --itrace=bep -s ~/libexec/perf-core/scripts/python/export-to-postgresql.py perf_data_db branches calls
2020-06-25 16:09:40.990267 Creating database...
2020-06-25 16:09:41.207009 Writing to intermediate files...
2020-06-25 16:09:41.270915 Copying to database...
2020-06-25 16:09:41.382030 Removing intermediate files...
2020-06-25 16:09:41.384630 Adding primary keys
2020-06-25 16:09:41.541894 Adding foreign keys
2020-06-25 16:09:41.677044 Dropping unused tables
2020-06-25 16:09:41.703761 Done
Fixes: aba44287a224 ("perf scripts python: export-to-postgresql.py: Export Intel PT power and ptwrite events")
Signed-off-by: Adrian Hunter <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: [email protected]
Link: http://lore.kernel.org/lkml/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
To bring in the change made in this cset:
e3a9e681adb7 ("x86/entry: Fixup bad_iret vs noinstr")
This doesn't cause any functional changes to tooling, just a rebuild.
Addresses this perf build warning:
Warning: Kernel ABI header at 'tools/arch/x86/lib/memcpy_64.S' differs from latest version at 'arch/x86/lib/memcpy_64.S'
diff -u tools/arch/x86/lib/memcpy_64.S arch/x86/lib/memcpy_64.S
Cc: Adrian Hunter <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
To synchronize UAPI headers.
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest
Pull kselftest fixes from Shuah Khan:
"tpm test fixes from Jarkko Sakkinen"
* tag 'linux-kselftest-fixes-5.8-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
selftests: tpm: Use /bin/sh instead of /bin/bash
selftests: tpm: Use 'test -e' instead of 'test -f'
Revert "tpm: selftest: cleanup after unseal with wrong auth/policy test"
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest
Pull kunit fixes from Shuah Khan
"Fixes for build and run-times failures.
Also includes troubleshooting tips updates to kunit user
documentation"
* tag 'linux-kselftest-kunit-fixes-5.8-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
Documentation: kunit: Add some troubleshooting tips to the FAQ
kunit: kunit_tool: Fix invalid result when build fails
kunit: show error if kunit results are not present
kunit: kunit_config: Fix parsing of CONFIG options with space
|
|
Debuggers expect that doing PTRACE_GETREGS, then poking at a tracee
and maybe letting it run for a while, then doing PTRACE_SETREGS will
put the tracee back where it was. In the specific case of a 32-bit
tracer and tracee, the PTRACE_GETREGS/SETREGS data structure doesn't
have fs_base or gs_base fields, so FSBASE and GSBASE fields are
never stored anywhere. Everything used to still work because
nonzero FS or GS would result full reloads of the segment registers
when the tracee resumes, and the bases associated with FS==0 or
GS==0 are irrelevant to 32-bit code.
Adding FSGSBASE support broke this: when FSGSBASE is enabled, FSBASE
and GSBASE are now restored independently of FS and GS for all tasks
when context-switched in. This means that, if a 32-bit tracer
restores a previous state using PTRACE_SETREGS but the tracee's
pre-restore and post-restore bases don't match, then the tracee is
resumed with the wrong base.
Fix it by explicitly loading the base when a 32-bit tracer pokes FS
or GS on a 64-bit kernel.
Also add a test case.
Fixes: 673903495c85 ("x86/process/64: Use FSBSBASE in switch_to() if available")
Signed-off-by: Andy Lutomirski <[email protected]>
Signed-off-by: Thomas Gleixner <[email protected]>
Link: https://lkml.kernel.org/r/229cc6a50ecbb701abd50fe4ddaf0eda888898cd.1593192140.git.luto@kernel.org
|
|
The manual call to set_thread_area() via int $0x80 was missing any
indication that the descriptor was a pointer, causing gcc to
occasionally generate wrong code. Add the missing constraint.
Signed-off-by: Andy Lutomirski <[email protected]>
Signed-off-by: Thomas Gleixner <[email protected]>
Link: https://lkml.kernel.org/r/432968af67259ca92d68b774a731aff468eae610.1593192140.git.luto@kernel.org
|
|
A comment was unclear. Fix it.
Fixes: 5e7ec8578fa3 ("selftests/x86/fsgsbase: Test ptracer-induced GS base write with FSGSBASE")
Signed-off-by: Andy Lutomirski <[email protected]>
Signed-off-by: Thomas Gleixner <[email protected]>
Link: https://lkml.kernel.org/r/901034a91a40169ec84f1f699ea86704dff762e4.1593192140.git.luto@kernel.org
|
|
There are several copies of get_eflags() and set_eflags() and they all are
buggy. Consolidate them and fix them. The fixes are:
Add memory clobbers. These are probably unnecessary but they make sure
that the compiler doesn't move something past one of these calls when it
shouldn't.
Respect the redzone on x86_64. There has no failure been observed related
to this, but it's definitely a bug.
Signed-off-by: Andy Lutomirski <[email protected]>
Signed-off-by: Thomas Gleixner <[email protected]>
Link: https://lkml.kernel.org/r/982ce58ae8dea2f1e57093ee894760e35267e751.1593191971.git.luto@kernel.org
|
|
Clear the weird flags before logging to improve strace output --
logging results while, say, TF is set does no one any favors.
Signed-off-by: Andy Lutomirski <[email protected]>
Signed-off-by: Thomas Gleixner <[email protected]>
Link: https://lkml.kernel.org/r/907bfa5a42d4475b8245e18b67a04b13ca51ffdb.1593191971.git.luto@kernel.org
|
|
Add EFLAGS.AC to the mix.
Signed-off-by: Andy Lutomirski <[email protected]>
Signed-off-by: Thomas Gleixner <[email protected]>
Link: https://lkml.kernel.org/r/12924e2fe2c5826568b7fc9436d85ca7f5eb1743.1593191971.git.luto@kernel.org
|
|
Daniel Borkmann says:
====================
pull-request: bpf 2020-06-30
The following pull-request contains BPF updates for your *net* tree.
We've added 28 non-merge commits during the last 9 day(s) which contain
a total of 35 files changed, 486 insertions(+), 232 deletions(-).
The main changes are:
1) Fix an incorrect verifier branch elimination for PTR_TO_BTF_ID pointer
types, from Yonghong Song.
2) Fix UAPI for sockmap and flow_dissector progs that were ignoring various
arguments passed to BPF_PROG_{ATTACH,DETACH}, from Lorenz Bauer & Jakub Sitnicki.
3) Fix broken AF_XDP DMA hacks that are poking into dma-direct and swiotlb
internals and integrate it properly into DMA core, from Christoph Hellwig.
4) Fix RCU splat from recent changes to avoid skipping ingress policy when
kTLS is enabled, from John Fastabend.
5) Fix BPF ringbuf map to enforce size to be the power of 2 in order for its
position masking to work, from Andrii Nakryiko.
6) Fix regression from CAP_BPF work to re-allow CAP_SYS_ADMIN for loading
of network programs, from Maciej Żenczykowski.
7) Fix libbpf section name prefix for devmap progs, from Jesper Dangaard Brouer.
8) Fix formatting in UAPI documentation for BPF helpers, from Quentin Monnet.
====================
Signed-off-by: David S. Miller <[email protected]>
|
|
Add two tests for PTR_TO_BTF_ID vs. null ptr comparison,
one for PTR_TO_BTF_ID in the ctx structure and the
other for PTR_TO_BTF_ID after one level pointer chasing.
In both cases, the test ensures condition is not
removed.
For example, for this test
struct bpf_fentry_test_t {
struct bpf_fentry_test_t *a;
};
int BPF_PROG(test7, struct bpf_fentry_test_t *arg)
{
if (arg == 0)
test7_result = 1;
return 0;
}
Before the previous verifier change, we have xlated codes:
int test7(long long unsigned int * ctx):
; int BPF_PROG(test7, struct bpf_fentry_test_t *arg)
0: (79) r1 = *(u64 *)(r1 +0)
; int BPF_PROG(test7, struct bpf_fentry_test_t *arg)
1: (b4) w0 = 0
2: (95) exit
After the previous verifier change, we have:
int test7(long long unsigned int * ctx):
; int BPF_PROG(test7, struct bpf_fentry_test_t *arg)
0: (79) r1 = *(u64 *)(r1 +0)
; if (arg == 0)
1: (55) if r1 != 0x0 goto pc+4
; test7_result = 1;
2: (18) r1 = map[id:6][0]+48
4: (b7) r2 = 1
5: (7b) *(u64 *)(r1 +0) = r2
; int BPF_PROG(test7, struct bpf_fentry_test_t *arg)
6: (b4) w0 = 0
7: (95) exit
Signed-off-by: Yonghong Song <[email protected]>
Signed-off-by: Daniel Borkmann <[email protected]>
Acked-by: John Fastabend <[email protected]>
Acked-by: Andrii Nakryiko <[email protected]>
Link: https://lore.kernel.org/bpf/[email protected]
|
|
Calling bpf_prog_detach is incorrect, since it takes target_fd as
its argument. The intention here is to pass it as attach_bpf_fd,
so use bpf_prog_detach2 and pass zero for target_fd.
Fixes: 06716e04a043 ("selftests/bpf: Extend test_flow_dissector to cover link creation")
Signed-off-by: Lorenz Bauer <[email protected]>
Signed-off-by: Alexei Starovoitov <[email protected]>
Link: https://lore.kernel.org/bpf/[email protected]
|
|
Pass 0 as target_fd when attaching and detaching flow dissector.
Additionally, pass the expected program when detaching.
Fixes: 1f043f87bb59 ("selftests/bpf: Add tests for attaching bpf_link to netns")
Signed-off-by: Lorenz Bauer <[email protected]>
Signed-off-by: Alexei Starovoitov <[email protected]>
Link: https://lore.kernel.org/bpf/[email protected]
|
|
This case, while not particularly useful, is worth covering because we
expect the operation to succeed as opposed when re-attaching the same
program directly with PROG_ATTACH.
While at it, update the tests summary that fell out of sync when tests
extended to cover links.
Signed-off-by: Jakub Sitnicki <[email protected]>
Signed-off-by: Alexei Starovoitov <[email protected]>
Acked-by: Martin KaFai Lau <[email protected]>
Link: https://lore.kernel.org/bpf/[email protected]
|
|
It's better to use /bin/sh instead of /bin/bash in order to run the tests
in the BusyBox shell.
Fixes: 6ea3dfe1e073 ("selftests: add TPM 2.0 tests")
Cc: [email protected]
Cc: [email protected]
Cc: [email protected]
Signed-off-by: Jarkko Sakkinen <[email protected]>
Signed-off-by: Shuah Khan <[email protected]>
|
|
'test -f' is suitable only for *regular* files. Use 'test -e' instead.
Cc: Nikita Sobolev <[email protected]>
Cc: [email protected]
Cc: [email protected]
Fixes: 5627f9cffee7 ("Kernel selftests: Add check if TPM devices are supported")
Signed-off-by: Jarkko Sakkinen <[email protected]>
Signed-off-by: Shuah Khan <[email protected]>
|
|
The reverted commit illegitly uses tpm2-tools. External dependencies are
absolutely forbidden from these tests. There is also the problem that
clearing is not necessarily wanted behavior if the test/target computer is
not used only solely for testing.
Fixes: a9920d3bad40 ("tpm: selftest: cleanup after unseal with wrong auth/policy test")
Cc: Tadeusz Struk <[email protected]>
Cc: [email protected]
Cc: [email protected]
Cc: [email protected]
Signed-off-by: Jarkko Sakkinen <[email protected]>
Signed-off-by: Shuah Khan <[email protected]>
|
|
herdtools7 7.56 is going to be released in the week of 22 Jun 2020.
This commit therefore adds the exact version in the compatibility table.
Acked-by: Andrea Parri <[email protected]>
Signed-off-by: Akira Yokosawa <[email protected]>
Signed-off-by: Paul E. McKenney <[email protected]>
|
|
klitmus7 is independent of the memory model but depends on the
build-target kernel release.
It occasionally lost compatibility due to kernel API changes [1, 2, 3].
It was remedied in a backwards-compatible manner respectively [4, 5, 6].
Reflect this fact in README.
[1]: b899a850431e ("compiler.h: Remove ACCESS_ONCE()")
[2]: 0bb95f80a38f ("Makefile: Globally enable VLA warning")
[3]: d56c0d45f0e2 ("proc: decouple proc from VFS with "struct proc_ops"")
[4]: https://github.com/herd/herdtools7/commit/e87d7f9287d1
("klitmus: Use WRITE_ONCE and READ_ONCE in place of deprecated ACCESS_ONCE")
[5]: https://github.com/herd/herdtools7/commit/a0cbb10d02be
("klitmus: Avoid variable length array")
[6]: https://github.com/herd/herdtools7/commit/46b9412d3a58
("klitmus: Linux kernel v5.6.x compat")
NOTE: [5] was ahead of herdtools7 7.53, which did not make an
official release. Code generated by klitmus7 without [5] can still be
built targeting Linux 4.20--5.5 if you don't care VLA warnings.
Acked-by: Andrea Parri <[email protected]>
Signed-off-by: Akira Yokosawa <[email protected]>
Signed-off-by: Paul E. McKenney <[email protected]>
|
|
The name of litmus test doesn't match the one described below.
Fix the name of litmus test.
Acked-by: Andrea Parri <[email protected]>
Acked-by: Joel Fernandes (Google) <[email protected]>
Signed-off-by: Akira Yokosawa <[email protected]>
Signed-off-by: Paul E. McKenney <[email protected]>
|
|
According to Luc, atomic_add_unless() is directly provided by herd7,
therefore it can be used in litmus tests. So change the limitation
section in README to unlimit the use of atomic_add_unless().
Cc: Luc Maranget <[email protected]>
Acked-by: Andrea Parri <[email protected]>
Reviewed-by: Joel Fernandes (Google) <[email protected]>
Signed-off-by: Boqun Feng <[email protected]>
Signed-off-by: Paul E. McKenney <[email protected]>
|
|
The definition of "conflict" should not include the type of access nor
whether the accesses are concurrent or not, which this patch addresses.
The definition of "data race" remains unchanged.
The definition of "conflict" as we know it and is cited by various
papers on memory consistency models appeared in [1]: "Two accesses to
the same variable conflict if at least one is a write; two operations
conflict if they execute conflicting accesses."
The LKMM as well as the C11 memory model are adaptations of
data-race-free, which are based on the work in [2]. Necessarily, we need
both conflicting data operations (plain) and synchronization operations
(marked). For example, C11's definition is based on [3], which defines a
"data race" as: "Two memory operations conflict if they access the same
memory location, and at least one of them is a store, atomic store, or
atomic read-modify-write operation. In a sequentially consistent
execution, two memory operations from different threads form a type 1
data race if they conflict, at least one of them is a data operation,
and they are adjacent in <T (i.e., they may be executed concurrently)."
[1] D. Shasha, M. Snir, "Efficient and Correct Execution of Parallel
Programs that Share Memory", 1988.
URL: http://snir.cs.illinois.edu/listed/J21.pdf
[2] S. Adve, "Designing Memory Consistency Models for Shared-Memory
Multiprocessors", 1993.
URL: http://sadve.cs.illinois.edu/Publications/thesis.pdf
[3] H.-J. Boehm, S. Adve, "Foundations of the C++ Concurrency Memory
Model", 2008.
URL: https://www.hpl.hp.com/techreports/2008/HPL-2008-56.pdf
Signed-off-by: Marco Elver <[email protected]>
Co-developed-by: Alan Stern <[email protected]>
Signed-off-by: Alan Stern <[email protected]>
Acked-by: Andrea Parri <[email protected]>
Signed-off-by: Paul E. McKenney <[email protected]>
|
|
This commit updates the list of LKMM-related publications in
Documentation/references.txt.
Signed-off-by: Paul E. McKenney <[email protected]>
Acked-by: Andrea Parri <[email protected]>
|
|
'kfree_rcu.2020.06.29a', 'rcu-tasks.2020.06.29a', 'scale.2020.06.29a', 'srcu.2020.06.29a' and 'torture.2020.06.29a' into HEAD
doc.2020.06.29a: Documentation updates.
fixes.2020.06.29a: Miscellaneous fixes.
kfree_rcu.2020.06.29a: kfree_rcu() updates.
rcu-tasks.2020.06.29a: RCU Tasks updates.
scale.2020.06.29a: Read-side scalability tests.
srcu.2020.06.29a: SRCU updates.
torture.2020.06.29a: Torture-test updates.
|
|
In the dim distant past, qemu commands needed to be run from the
rcutorture directory, but this is no longer the case. This commit
therefore removes the now-useless "cd $KVM" from the kvm-test-1-run.sh
script.
Signed-off-by: Paul E. McKenney <[email protected]>
|
|
Currently, the qemu command is constructed twice, once to dump it
to the qemu-cmd file and again to execute it. This is of course an
accident waiting to happen, but is done to ensure that the remainder
of the script has an accurate idea of the running qemu command's PID.
This commit therefore places both the qemu command and the PID capture
into a new temporary file and sources that temporary file. Thus the
single construction of the qemu command into the qemu-cmd file suffices
for both purposes.
Signed-off-by: Paul E. McKenney <[email protected]>
|
|
This commit adds a script that transforms qemu-cmd files to allow them
and the corresponding kernels to be run in contexts other than the one
that they were created for, including on systems other than the one that
they were built on. For example, this allows the build products from a
--buildonly run to be transformed to allow distributed rcutorture testing.
Signed-off-by: Paul E. McKenney <[email protected]>
|
|
This commit adds a few more hints about how to use tracing as comments
at the end of kvm.sh.
Signed-off-by: Paul E. McKenney <[email protected]>
|
|
Using --kcsan when the compiler does not support KCSAN results in this:
:CONFIG_KCSAN=y: improperly set
:CONFIG_KCSAN_REPORT_ONCE_IN_MS=100000: improperly set
:CONFIG_KCSAN_VERBOSE=y: improperly set
:CONFIG_KCSAN_INTERRUPT_WATCHER=y: improperly set
Clean KCSAN run in /home/git/linux-rcu/tools/testing/selftests/rcutorture/res/2020.06.16-09.53.16
This is a bit obtuse, so this commit adds checks resulting in this:
:CONFIG_KCSAN=y: improperly set
:CONFIG_KCSAN_REPORT_ONCE_IN_MS=100000: improperly set
:CONFIG_KCSAN_VERBOSE=y: improperly set
:CONFIG_KCSAN_INTERRUPT_WATCHER=y: improperly set
Compiler or architecture does not support KCSAN!
Did you forget to switch your compiler with --kmake-arg CC=<cc-that-supports-kcsan>?
Suggested-by: Marco Elver <[email protected]>
Signed-off-by: Paul E. McKenney <[email protected]>
Acked-by: Marco Elver <[email protected]>
|
|
Currently, kvm-recheck.sh complains that qemu failed for --buildonly
runs, which is sort of true given that qemu can hardly succeed if not
invoked in the first place. Nevertheless, this commit swaps the order
of checks in kvm-recheck.sh so that --buildonly runs will be summarized
more straightforwardly.
Signed-off-by: Paul E. McKenney <[email protected]>
|
|
We need to pass the arguments provided to --kmake-arg to all make
invocations. In particular, the make invocations generating the configs
need to see the final make arguments, e.g. if config variables depend on
particular variables that are passed to make.
For example, when using '--kcsan --kmake-arg CC=clang-11', we would lose
CONFIG_KCSAN=y due to 'make oldconfig' not seeing that we want to use a
compiler that supports KCSAN.
Signed-off-by: Marco Elver <[email protected]>
Signed-off-by: Paul E. McKenney <[email protected]>
|
|
This commit pulls the simple pattern-based error detection from the
console log into a new console-badness.sh file. This will enable future
commits to end a run on the first error.
Signed-off-by: Paul E. McKenney <[email protected]>
|
|
When bisecting RCU issues, it is often the case that the first error in
an unsuccessful run will happen quickly, but that a successful run must
go on for some time in order to obtain a sufficiently low false-negative
error rate. In many cases, a bisection requires multiple concurrent
runs, in which case the first failure in any run indicates failure,
pure and simple. In such cases, it would speed things up greatly if
the first failure terminated all runs.
This commit therefore adds scripting that checks for a file named "STOP"
in the top-level results directory, terminating the run when it appears.
Note that in-progress builds will continue until completion, but future
builds and all runs will be cut short.
Signed-off-by: Paul E. McKenney <[email protected]>
|
|
One reason to do a --buildonly run is to use the build products elsewhere,
for example, to do the actual test on some other system. Part of doing
the test is the actual qemu command, which is not currently produced
by --buildonly runs. This commit therefore causes --buildonly runs to
create this file.
Signed-off-by: Paul E. McKenney <[email protected]>
|
|
Leaving off the kvm.sh script's --cpus argument results in the script
testing the scenarios sequentially, which can be quite slow. However,
having to specify the actual number of CPUs can be error-prone.
This commit therefore adds a --allcpus argument that causes kvm.sh to
use all available CPUs.
Signed-off-by: Paul E. McKenney <[email protected]>
|
|
The identify_qemu_vcpus bash function can return numbers including
whitespace characters, which can be a bit annoying in some bash
dollar-sign substitutions. This commit therefore strips all spaces and
tabs from the value that identify_qemu_vcpus outputs.
Signed-off-by: Paul E. McKenney <[email protected]>
|
|
The current console parsing assumes that console lines containing "!!!"
are statistics lines from which it can parse the number of rcutorture
too-short grace-period failures. This prints confusing output for
other problems, including memory exhaustion. This commit therefore
differentiates between these cases and prints an appropriate error string.
Signed-off-by: Paul E. McKenney <[email protected]>
|
|
The torture-test recheck logic fails to set the configfile variable to
the current scenario, so this commit properly initializes this variable.
This change isn't critical given that all errors for a given scenario
follow that scenario's heading, but it is easier on the eyes to repeat it.
And this repetition also prevents confusion as to whether a given message
goes with the previous heading or the next one.
Signed-off-by: Paul E. McKenney <[email protected]>
|
|
This commit adds a kvm-check-branches.sh script that takes a list
of commits and commit ranges and runs a short rcutorture test on all
scenarios on each specified commit. A summary is printed at the end, and
the script returns success if all rcutorture runs completed without error.
Signed-off-by: Paul E. McKenney <[email protected]>
|