aboutsummaryrefslogtreecommitdiff
path: root/tools
AgeCommit message (Collapse)AuthorFilesLines
2021-01-20Merge tag 'net-5.11-rc5' of ↵Linus Torvalds6-104/+102
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net Pull networking fixes from Jakub Kicinski: "Networking fixes for 5.11-rc5, including fixes from bpf, wireless, and can trees. Current release - regressions: - nfc: nci: fix the wrong NCI_CORE_INIT parameters Current release - new code bugs: - bpf: allow empty module BTFs Previous releases - regressions: - bpf: fix signed_{sub,add32}_overflows type handling - tcp: do not mess with cloned skbs in tcp_add_backlog() - bpf: prevent double bpf_prog_put call from bpf_tracing_prog_attach - bpf: don't leak memory in bpf getsockopt when optlen == 0 - tcp: fix potential use-after-free due to double kfree() - mac80211: fix encryption issues with WEP - devlink: use right genl user_ptr when handling port param get/set - ipv6: set multicast flag on the multicast route - tcp: fix TCP_USER_TIMEOUT with zero window Previous releases - always broken: - bpf: local storage helpers should check nullness of owner ptr passed - mac80211: fix incorrect strlen of .write in debugfs - cls_flower: call nla_ok() before nla_next() - skbuff: back tiny skbs with kmalloc() in __netdev_alloc_skb() too" * tag 'net-5.11-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (52 commits) net: systemport: free dev before on error path net: usb: cdc_ncm: don't spew notifications net: mscc: ocelot: Fix multicast to the CPU port tcp: Fix potential use-after-free due to double kfree() bpf: Fix signed_{sub,add32}_overflows type handling can: peak_usb: fix use after free bugs can: vxcan: vxcan_xmit: fix use after free bug can: dev: can_restart: fix use after free bug tcp: fix TCP socket rehash stats mis-accounting net: dsa: b53: fix an off by one in checking "vlan->vid" tcp: do not mess with cloned skbs in tcp_add_backlog() selftests: net: fib_tests: remove duplicate log test net: nfc: nci: fix the wrong NCI_CORE_INIT parameters sh_eth: Fix power down vs. is_opened flag ordering net: Disable NETIF_F_HW_TLS_RX when RXCSUM is disabled netfilter: rpfilter: mask ecn bits before fib lookup udp: mask TOS bits in udp_v4_early_demux() xsk: Clear pool even for inactive queues bpf: Fix helper bpf_map_peek_elem_proto pointing to wrong callback sh_eth: Make PHY access aware of Runtime PM to fix reboot crash ...
2021-01-20Merge remote-tracking branch 'torvalds/master' into perf/coreArnaldo Carvalho de Melo46-682/+992
To pick up fixes. Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2021-01-20perf tools: Add 'ping' control commandJiri Olsa5-0/+9
Add a control 'ping' command to detect if perf is up and its control interface is operational. It will be used in following daemon patches to synchronize with record session - when control interface is up and running, we know that perf record is monitoring and ready to receive signals. Example session: terminal 1: # mkfifo control ack # perf record --control=fifo:control,ack terminal 2: # echo ping > control # cat ack ack Signed-off-by: Jiri Olsa <[email protected]> Tested-by: Arnaldo Carvalho de Melo <[email protected]> Acked-by: Namhyung Kim <[email protected]> Cc: Alexander Shishkin <[email protected]> Cc: Alexei Budankov <[email protected]> Cc: Ian Rogers <[email protected]> Cc: Mark Rutland <[email protected]> Cc: Michael Petlan <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: Stephane Eranian <[email protected]> Link: http://lore.kernel.org/lkml/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2021-01-20perf tools: Add 'stop' control commandJiri Olsa5-0/+11
Adding control 'stop' command to stop perf record. When it is received, perf will set the 'done' variable to 1 to stop its mmap ring buffer reading loop. Example session: terminal 1: # mkfifo control ack # perf record --control=fifo:control,ack terminal 2: # echo stop > control terminal 1: [ perf record: Woken up 7 times to write data ] [ perf record: Captured and wrote 3.214 MB perf.data (38280 samples) ] # Signed-off-by: Jiri Olsa <[email protected]> Tested-by: Arnaldo Carvalho de Melo <[email protected]> Acked-by: Namhyung Kim <[email protected]> Cc: Alexander Shishkin <[email protected]> Cc: Alexei Budankov <[email protected]> Cc: Ian Rogers <[email protected]> Cc: Mark Rutland <[email protected]> Cc: Michael Petlan <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: Stephane Eranian <[email protected]> Link: http://lore.kernel.org/lkml/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2021-01-20perf tools: Add 'evlist' control commandJiri Olsa8-6/+59
Add a new 'evlist' control command to display all the evlist events. When it is received, perf will scan and print current evlist into perf record terminal. The interface string for control file is: evlist [-v|-g|-F] The syntax follows perf evlist command: -F Show just the sample frequency used for each event. -v Show all fields. -g Show event group information. Example session: terminal 1: # mkfifo control ack # perf record --control=fifo:control,ack -e '{cycles,instructions}' terminal 2: # echo evlist > control terminal 1: cycles instructions dummy:HG terminal 2: # echo 'evlist -v' > control terminal 1: cycles: size: 120, { sample_period, sample_freq }: 4000, sample_type: \ IP|TID|TIME|ID|CPU|PERIOD, read_format: ID, disabled: 1, inherit: 1, freq: 1, \ sample_id_all: 1, exclude_guest: 1 instructions: size: 120, config: 0x1, { sample_period, sample_freq }: 4000, \ sample_type: IP|TID|TIME|ID|CPU|PERIOD, read_format: ID, inherit: 1, freq: 1, \ sample_id_all: 1, exclude_guest: 1 dummy:HG: type: 1, size: 120, config: 0x9, { sample_period, sample_freq }: 4000, \ sample_type: IP|TID|TIME|ID|CPU|PERIOD, read_format: ID, inherit: 1, mmap: 1, \ comm: 1, freq: 1, task: 1, sample_id_all: 1, mmap2: 1, comm_exec: 1, ksymbol: 1, \ bpf_event: 1 terminal 2: # echo 'evlist -g' > control terminal 1: {cycles,instructions} dummy:HG terminal 2: # echo 'evlist -F' > control terminal 1: cycles: sample_freq=4000 instructions: sample_freq=4000 dummy:HG: sample_freq=4000 This new evlist command is handy to get real event names when wildcards are used. Adding evsel_fprintf.c object to python/perf.so build, because it's now evlist.c dependency. Adding PYTHON_PERF define for python/perf.so compilation, so we can use it to compile in only evsel__fprintf from evsel_fprintf.c object. Signed-off-by: Jiri Olsa <[email protected]> Tested-by: Arnaldo Carvalho de Melo <[email protected]> Acked-by: Namhyung Kim <[email protected]> Cc: Alexander Shishkin <[email protected]> Cc: Alexei Budankov <[email protected]> Cc: Ian Rogers <[email protected]> Cc: Mark Rutland <[email protected]> Cc: Michael Petlan <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: Stephane Eranian <[email protected]> Link: http://lore.kernel.org/lkml/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2021-01-20perf tools: Allow to enable/disable events via control fileJiri Olsa4-14/+67
Adding new control events to enable/disable specific event. The interface string for control file are: 'enable <EVENT NAME>' 'disable <EVENT NAME>' when received the command, perf will scan the current evlist for <EVENT NAME> and if found it's enabled/disabled. Example session: terminal 1: # mkfifo control ack perf.pipe # perf record --control=fifo:control,ack -D -1 --no-buffering -e 'sched:*' -o - > perf.pipe terminal 2: # cat perf.pipe | perf --no-pager script -i - terminal 1: Events disabled NOTE Above message will show only after read side of the pipe ('>') is started on 'terminal 2'. The 'terminal 1's bash does not execute perf before that, hence the delyaed perf record message. terminal 3: # echo 'enable sched:sched_process_fork' > control terminal 1: event sched:sched_process_fork enabled terminal 2: bash 33349 [034] 149587.674295: sched:sched_process_fork: comm=bash pid=33349 child_comm=bash child_pid=34056 bash 33349 [034] 149588.239521: sched:sched_process_fork: comm=bash pid=33349 child_comm=bash child_pid=34057 terminal 3: # echo 'enable sched:sched_wakeup_new' > control terminal 1: event sched:sched_wakeup_new enabled terminal 2: bash 33349 [034] 149632.228023: sched:sched_process_fork: comm=bash pid=33349 child_comm=bash child_pid=34059 bash 33349 [034] 149632.228050: sched:sched_wakeup_new: bash:34059 [120] success=1 CPU:036 bash 33349 [034] 149633.950005: sched:sched_process_fork: comm=bash pid=33349 child_comm=bash child_pid=34060 bash 33349 [034] 149633.950030: sched:sched_wakeup_new: bash:34060 [120] success=1 CPU:036 Committer testing: If I use 'sched:*' and then enable all events, I can't get 'perf record' to react to further commands, so I tested it with: [root@five ~]# perf record --control=fifo:control,ack -D -1 --no-buffering -e 'sched:sched_process_*' -o - > perf.pipe Events disabled Events enabled Events disabled And then it works as expected, so we need to fix this pre-existing problem. Another issue, we need to check if a event is already enabled or disabled and change the message to be clearer, i.e.: [root@five ~]# perf record --control=fifo:control,ack -D -1 --no-buffering -e 'sched:sched_process_*' -o - > perf.pipe Events disabled If we receive a 'disable' command, then it should say: [root@five ~]# perf record --control=fifo:control,ack -D -1 --no-buffering -e 'sched:sched_process_*' -o - > perf.pipe Events disabled Events already disabled Signed-off-by: Jiri Olsa <[email protected]> Tested-by: Arnaldo Carvalho de Melo <[email protected]> Acked-by: Namhyung Kim <[email protected]> Cc: Alexander Shishkin <[email protected]> Cc: Alexei Budankov <[email protected]> Cc: Ian Rogers <[email protected]> Cc: Mark Rutland <[email protected]> Cc: Michael Petlan <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: Stephane Eranian <[email protected]> Link: http://lore.kernel.org/lkml/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2021-01-20perf config: Make perf_config_global() globalJiri Olsa2-1/+2
Make perf_config_global global, it will be used outside the config.c object in the following patches. Signed-off-by: Jiri Olsa <[email protected]> Cc: Alexander Shishkin <[email protected]> Cc: Alexei Budankov <[email protected]> Cc: Ian Rogers <[email protected]> Cc: Mark Rutland <[email protected]> Cc: Michael Petlan <[email protected]> Cc: Namhyung Kim <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: Stephane Eranian <[email protected]> Link: http://lore.kernel.org/lkml/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2021-01-20perf config: Make perf_config_system() globalJiri Olsa2-1/+2
Make perf_config_system global, it will be used outside the config.c object in the following patches. Signed-off-by: Jiri Olsa <[email protected]> Cc: Alexander Shishkin <[email protected]> Cc: Alexei Budankov <[email protected]> Cc: Ian Rogers <[email protected]> Cc: Mark Rutland <[email protected]> Cc: Michael Petlan <[email protected]> Cc: Namhyung Kim <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: Stephane Eranian <[email protected]> Link: http://lore.kernel.org/lkml/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2021-01-20perf config: Add perf_home_perfconfig functionJiri Olsa2-36/+54
Factor out the perf_home_perfconfig, that looks for .perfconfig in home directory including check for PERF_CONFIG_NOGLOBAL and for proper permission. Signed-off-by: Jiri Olsa <[email protected]> Cc: Alexander Shishkin <[email protected]> Cc: Alexei Budankov <[email protected]> Cc: Ian Rogers <[email protected]> Cc: Mark Rutland <[email protected]> Cc: Michael Petlan <[email protected]> Cc: Namhyung Kim <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: Stephane Eranian <[email protected]> Link: http://lore.kernel.org/lkml/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2021-01-20perf debug: Add debug_set_display_time functionJiri Olsa2-3/+32
Allow to display time in perf debug output via new debug_set_display_time function. It will be used in perf daemon command to get verbose output into log file. The debug time format is: [2020-12-03 18:25:31.822152] affinity: SYS [2020-12-03 18:25:31.822164] mmap flush: 1 [2020-12-03 18:25:31.822175] comp level: 0 [2020-12-03 18:25:32.002047] mmap size 528384B Committer notes: Cast tod.tv_usec to long to avoid this problem: 78 12.70 ubuntu:18.04-x-sparc64 : FAIL sparc64-linux-gnu-gcc (Ubuntu 7.5.0-3ubuntu1~18.04) 7.5.0 util/debug.c: In function 'fprintf_time': util/debug.c:63:32: error: format '%lu' expects argument of type 'long unsigned int', but argument 4 has type '__suseconds_t {aka int}' [-Werror=format=] return fprintf(file, "[%s.%06lu] ", date, tod.tv_usec); ~~~~^ ~~~~~~~~~~~ %06u Signed-off-by: Jiri Olsa <[email protected]> Cc: Alexander Shishkin <[email protected]> Cc: Alexei Budankov <[email protected]> Cc: Ian Rogers <[email protected]> Cc: Mark Rutland <[email protected]> Cc: Michael Petlan <[email protected]> Cc: Namhyung Kim <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: Stephane Eranian <[email protected]> Link: http://lore.kernel.org/lkml/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2021-01-20perf config: Add config set interfaceJiri Olsa2-5/+26
Add interface to load config set from custom file by using perf_config_set__load_file function. It will be used in perf daemon command to process custom config file. Signed-off-by: Jiri Olsa <[email protected]> Cc: Alexander Shishkin <[email protected]> Cc: Alexei Budankov <[email protected]> Cc: Ian Rogers <[email protected]> Cc: Mark Rutland <[email protected]> Cc: Michael Petlan <[email protected]> Cc: Namhyung Kim <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: Stephane Eranian <[email protected]> Link: http://lore.kernel.org/lkml/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2021-01-20perf config: Make perf_config_from_file() staticJiri Olsa2-2/+1
It's not used outside config.c object. Signed-off-by: Jiri Olsa <[email protected]> Cc: Alexander Shishkin <[email protected]> Cc: Alexei Budankov <[email protected]> Cc: Ian Rogers <[email protected]> Cc: Mark Rutland <[email protected]> Cc: Michael Petlan <[email protected]> Cc: Namhyung Kim <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: Stephane Eranian <[email protected]> Link: http://lore.kernel.org/lkml/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2021-01-20perf test: Add test case for PERF_SAMPLE_CODE_PAGE_SIZEStephane Eranian1-0/+4
Extend sample-parsing test cases to support new sample type PERF_SAMPLE_CODE_PAGE_SIZE. Signed-off-by: Stephane Eranian <[email protected]> Acked-by: Jiri Olsa <[email protected]> Acked-by: Namhyung Kim <[email protected]> Cc: Andi Kleen <[email protected]> Cc: Ingo Molnar <[email protected]> Cc: Mark Rutland <[email protected]> Cc: Michael Ellerman <[email protected]> Cc: Will Deacon <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Kan Liang <[email protected]> Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2021-01-20perf report: Add support for PERF_SAMPLE_CODE_PAGE_SIZEStephane Eranian5-0/+32
Add a new sort dimension "code_page_size" for common sort. With this option applied, perf can sort and report by sample's code page size. For example: # perf report --stdio --sort=comm,symbol,code_page_size # To display the perf.data header info, please use # --header/--header-only options. # # # Total Lost Samples: 0 # # Samples: 3K of event 'mem-loads:uP' # Event count (approx.): 1470769 # # Overhead Command Symbol Code Page Size IPC [IPC Coverage] # ........ ....... ............................ .............. .................... # 69.56% dtlb [.] GetTickCount 4K - - 17.93% dtlb [.] Calibrate 4K - - 11.40% dtlb [.] __gettimeofday 4K - - # Signed-off-by: Stephane Eranian <[email protected]> Acked-by: Jiri Olsa <[email protected]> Acked-by: Namhyung Kim <[email protected]> Cc: Andi Kleen <[email protected]> Cc: Ingo Molnar <[email protected]> Cc: Mark Rutland <[email protected]> Cc: Michael Ellerman <[email protected]> Cc: Will Deacon <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Kan Liang <[email protected]> Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2021-01-20perf script: Add support for PERF_SAMPLE_CODE_PAGE_SIZEStephane Eranian3-3/+15
Display sampled code page sizes when PERF_SAMPLE_CODE_PAGE_SIZE was set. For example: # perf script --fields comm,event,ip,code_page_size dtlb mem-loads:uP: 445777 4K dtlb mem-loads:uP: 40f724 4K dtlb mem-loads:uP: 474926 4K dtlb mem-loads:uP: 401075 4K dtlb mem-loads:uP: 401095 4K dtlb mem-loads:uP: 401095 4K dtlb mem-loads:uP: 4010cc 4K dtlb mem-loads:uP: 440b6f 4K # Signed-off-by: Stephane Eranian <[email protected]> Acked-by: Jiri Olsa <[email protected]> Acked-by: Namhyung Kim <[email protected]> Cc: Andi Kleen <[email protected]> Cc: Ingo Molnar <[email protected]> Cc: Mark Rutland <[email protected]> Cc: Michael Ellerman <[email protected]> Cc: Will Deacon <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Kan Liang <[email protected]> Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2021-01-20perf record: Add support for PERF_SAMPLE_CODE_PAGE_SIZEKan Liang8-2/+34
Adds the infrastructure to sample the code address page size. Introduce a new --code-page-size option for perf record. Signed-off-by: Kan Liang <[email protected]> Originally-by: Stephane Eranian <[email protected]> Acked-by: Jiri Olsa <[email protected]> Acked-by: Namhyung Kim <[email protected]> Cc: Andi Kleen <[email protected]> Cc: Ingo Molnar <[email protected]> Cc: Mark Rutland <[email protected]> Cc: Michael Ellerman <[email protected]> Cc: Will Deacon <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2021-01-20perf mem: Support data page sizeKan Liang2-1/+22
Add option --data-page-size in "perf mem" to record/report data page size. Here are some examples: # perf mem --phys-data --data-page-size report -D # PID, TID, IP, ADDR, PHYS ADDR, DATA PAGE SIZE, LOCAL WEIGHT, DSRC, SYMBOL 20134 20134 0xffffffffb5bd2fd0 0x016ffff9a274e96a308 0x000000044e96a308 4K 1168 0x5080144 /lib/modules/4.18.0-rc7+/build/vmlinux:perf_ctx_unlock 20134 20134 0xffffffffb63f645c 0xffffffffb752b814 0xcfb52b814 2M 225 0x26a100142 /lib/modules/4.18.0-rc7+/build/vmlinux:_raw_spin_lock 20134 20134 0xffffffffb660300c 0xfffffe00016b8bb0 0x0 4K 0 0x5080144 /lib/modules/4.18.0-rc7+/build/vmlinux:__x86_indirect_thunk_rax # # perf mem --phys-data --data-page-size report --stdio # To display the perf.data header info, please use # --header/--header-only options. # # # Total Lost Samples: 0 # # Samples: 5K of event 'cpu/mem-loads,ldlat=30/P' # Total weight : 281234 # Sort order : # mem,sym,dso,symbol_daddr,dso_daddr,tlb,locked,phys_daddr,data_page_size # # Overhead Samples Memory access Symbol Shared Object Data Symbol Data Object TLB access Locked Data Physical Address Data Page Size # ........ ....... ............. ............................ ................ ...................... ........... ............ ...... ...................... .............. 28.54% 1826 L1 or L1 hit [k] __x86_indirect_thunk_rax [kernel.vmlinux] [k] 0xffffb0df31b0ff28 [unknown] L1 or L2 hit No [k] 0x0000000000000000 4K 6.02% 256 L1 or L1 hit [.] touch_buffer dtlb [.] 0x00007ffd50109da8 [stack] L1 or L2 hit No [.] 0x000000042454ada8 4K 3.23% 5 L1 or L1 hit [k] clear_huge_page [kernel.vmlinux] [k] 0xffff9a2753b8ce60 [unknown] L1 or L2 hit No [k] 0x0000000453b8ce60 2M 2.98% 4 L1 or L1 hit [k] clear_page_erms [kernel.vmlinux] [k] 0xffffb0df31b0fd00 [unknown] L1 or L2 hit No [k] 0x0000000000000000 4K Signed-off-by: Kan Liang <[email protected]> Acked-by: Jiri Olsa <[email protected]> Acked-by: Namhyung Kim <[email protected]> Cc: Andi Kleen <[email protected]> Cc: Ingo Molnar <[email protected]> Cc: Mark Rutland <[email protected]> Cc: Michael Ellerman <[email protected]> Cc: Stephane Eranian <[email protected]> Cc: Will Deacon <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2021-01-20perf mem: Clean up output formatKan Liang1-55/+38
Now, "--phys-data" is the only option which impacts the output format. A simple "if else" is enough to handle the option. But there will be more options added, e.g. "--data-page-size", which also impact the output format. The code will become too complex to be maintained. Divide the big printf into several small pieces. Output the specific piece only if the related option is applied. No functional change. Signed-off-by: Kan Liang <[email protected]> Acked-by: Jiri Olsa <[email protected]> Acked-by: Namhyung Kim <[email protected]> Cc: Andi Kleen <[email protected]> Cc: Ingo Molnar <[email protected]> Cc: Mark Rutland <[email protected]> Cc: Michael Ellerman <[email protected]> Cc: Stephane Eranian <[email protected]> Cc: Will Deacon <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2021-01-20perf cs-etm: Update ARM's CoreSight hardware tracing OpenCSD library to v1.0.0James Clark2-13/+6
Replace the OCSD_INSTR switch statement with an if to fix compilation error about unhandled values and avoid this issue again in the future. Add new OCSD_GEN_TRC_ELEM_SYNC_MARKER and OCSD_GEN_TRC_ELEM_MEMTRANS enum values to fix unhandled value compilation error. Currently they are ignored. Increase the minimum version number to v1.0.0 now that new enum values are used that are only present in this version. Signed-off-by: James Clark <[email protected]> Reviewed-by: Mathieu Poirier <[email protected]> Reviewed-by: Mike Leach <[email protected]> Tested-by: Mike Leach <[email protected]> Cc: Alexander Shishkin <[email protected]> Cc: Al Grant <[email protected]> Cc: Ingo Molnar <[email protected]> Cc: Jiri Olsa <[email protected]> Cc: John Garry <[email protected]> Cc: Leo Yan <[email protected]> Cc: Mark Rutland <[email protected]> Cc: Namhyung Kim <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: Suzuki K Poulose <[email protected]> Cc: Will Deacon <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2021-01-20perf c2c: Add local variables for output metricsLeo Yan1-26/+33
This patch adds several local variables: "cl_output": pointer for outputting single cache line metrics; "output_str": pointer for outputting cache line metrics; "sort_str": pointer to the sorting metrics. This can improve readability for the code and it's more flexible when later extend to different strings for the output metrics. Signed-off-by: Leo Yan <[email protected]> Acked-by: Jiri Olsa <[email protected]> Acked-by: Namhyung Kim <[email protected]> Cc: Alexander Shishkin <[email protected]> Cc: Arnaldo Carvalho de Melo <[email protected]> Cc: David Ahern <[email protected]> Cc: Don Zickus <[email protected]> Cc: Ingo Molnar <[email protected]> Cc: Joe Mario <[email protected]> Cc: Joe Perches <[email protected]> Cc: Mark Rutland <[email protected]> Cc: Peter Zijlstra <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2021-01-20perf c2c: Refactor node displayLeo Yan1-13/+20
The macro DISPLAY_HITM() is used to calculate HITM percentage introduced by every node and it's shown for the node info. This patch introduces the static function display_metrics() to replace the macro, and the parameters are refined for passing the metric's statistic and sum value. Signed-off-by: Leo Yan <[email protected]> Acked-by: Namhyung Kim <[email protected]> Acked-by: Jiri Olsa <[email protected]> Cc: Alexander Shishkin <[email protected]> Cc: Arnaldo Carvalho de Melo <[email protected]> Cc: David Ahern <[email protected]> Cc: Don Zickus <[email protected]> Cc: Ingo Molnar <[email protected]> Cc: Joe Mario <[email protected]> Cc: Joe Perches <[email protected]> Cc: Mark Rutland <[email protected]> Cc: Peter Zijlstra <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2021-01-20perf c2c: Fix argument type for percent()Leo Yan1-1/+1
For percent() its arguments are defined as integers; this is not consistent with its consumers which pass u32 arguments. Thus this patch makes argument type as u32 for percent(). Signed-off-by: Leo Yan <[email protected]> Acked-by: Namhyung Kim <[email protected]> Acked-by: Jiri Olsa <[email protected]> Cc: Alexander Shishkin <[email protected]> Cc: Arnaldo Carvalho de Melo <[email protected]> Cc: David Ahern <[email protected]> Cc: Don Zickus <[email protected]> Cc: Ingo Molnar <[email protected]> Cc: Joe Mario <[email protected]> Cc: Joe Perches <[email protected]> Cc: Mark Rutland <[email protected]> Cc: Peter Zijlstra <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2021-01-20perf c2c: Refactor display filterLeo Yan1-15/+15
When sorting on the respective metrics (lcl_hitm, rmt_hitm, tot_hitm), the FILTER_HITM macro is used to filter out the cache line entries if its overhead is less than 1%. This patch introduces a static function filter_display() to replace that macro and refines its parameters with a more flexible way, rather than passing field name, it changes to pass the cache line's statistic and sum value. Signed-off-by: Leo Yan <[email protected]> Acked-by: Namhyung Kim <[email protected]> Acked-by: Jiri Olsa <[email protected]> Cc: Alexander Shishkin <[email protected]> Cc: Arnaldo Carvalho de Melo <[email protected]> Cc: David Ahern <[email protected]> Cc: Don Zickus <[email protected]> Cc: Ingo Molnar <[email protected]> Cc: Joe Mario <[email protected]> Cc: Joe Perches <[email protected]> Cc: Mark Rutland <[email protected]> Cc: Peter Zijlstra <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2021-01-20perf c2c: Refactor hist entry validationLeo Yan1-7/+23
This patch has no functionality changes but refactors hist entry validation for cache line resorting. It renames function "valid_hitm_or_store()" to "is_valid_hist_entry()", changes return type from integer type to bool type. In the function, it uses switch-case instead of ternary operators, which is easier to extend for more display types. Signed-off-by: Leo Yan <[email protected]> Acked-by: Jiri Olsa <[email protected]> Acked-by: Namhyung Kim <[email protected]> Cc: Alexander Shishkin <[email protected]> Cc: David Ahern <[email protected]> Cc: Don Zickus <[email protected]> Cc: Ingo Molnar <[email protected]> Cc: Joe Mario <[email protected]> Cc: Joe Perches <[email protected]> Cc: Mark Rutland <[email protected]> Cc: Peter Zijlstra <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2021-01-20perf c2c: Rename for shared cache line statsLeo Yan1-7/+7
For shared cache line statistics, 'perf c2c' relies on HITM. We can use more general naming rather than only binding to HITM, so replace "hitm_stats" with "shared_clines_stats" in structure perf_c2c, and rename function resort_hitm_cb() to resort_shared_cl_cb(). Signed-off-by: Leo Yan <[email protected]> Acked-by: Jiri Olsa <[email protected]> Acked-by: Namhyung Kim <[email protected]> Cc: Alexander Shishkin <[email protected]> Cc: David Ahern <[email protected]> Cc: Don Zickus <[email protected]> Cc: Ingo Molnar <[email protected]> Cc: Joe Mario <[email protected]> Cc: Joe Perches <[email protected]> Cc: Mark Rutland <[email protected]> Cc: Peter Zijlstra <[email protected]> Signed-off-by: Arnaldo Carvalho de Melo <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2021-01-20perf stat: Enable counting events for BPF programsSong Liu14-18/+645
Introduce 'perf stat -b' option, which counts events for BPF programs, like: [root@localhost ~]# ~/perf stat -e ref-cycles,cycles -b 254 -I 1000 1.487903822 115,200 ref-cycles 1.487903822 86,012 cycles 2.489147029 80,560 ref-cycles 2.489147029 73,784 cycles 3.490341825 60,720 ref-cycles 3.490341825 37,797 cycles 4.491540887 37,120 ref-cycles 4.491540887 31,963 cycles The example above counts 'cycles' and 'ref-cycles' of BPF program of id 254. This is similar to bpftool-prog-profile command, but more flexible. 'perf stat -b' creates per-cpu perf_event and loads fentry/fexit BPF programs (monitor-progs) to the target BPF program (target-prog). The monitor-progs read perf_event before and after the target-prog, and aggregate the difference in a BPF map. Then the user space reads data from these maps. A new 'struct bpf_counter' is introduced to provide a common interface that uses BPF programs/maps to count perf events. Committer notes: Removed all but bpf_counter.h includes from evsel.h, not needed at all. Also BPF map lookups for PERCPU_ARRAYs need to have as its value receive buffer passed to the kernel libbpf_num_possible_cpus() entries, not evsel__nr_cpus(evsel), as the former uses /sys/devices/system/cpu/possible while the later uses /sys/devices/system/cpu/online, which may be less than the 'possible' number making the bpf map lookup overwrite memory and cause hard to debug memory corruption. We need to continue using evsel__nr_cpus(evsel) when accessing the perf_counts array tho, not to overwrite another are of memory :-) Signed-off-by: Song Liu <[email protected]> Tested-by: Arnaldo Carvalho de Melo <[email protected]> Link: https://lore.kernel.org/lkml/[email protected]/ Acked-by: Namhyung Kim <[email protected]> Cc: Alexander Shishkin <[email protected]> Cc: Jiri Olsa <[email protected]> Cc: Mark Rutland <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: [email protected] Link: http://lore.kernel.org/lkml/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2021-01-20arm64: mte: style: Simplify bool comparisonYANG LI1-1/+1
Fix the following coccicheck warning: ./tools/testing/selftests/arm64/mte/check_buffer_fill.c:84:12-35: WARNING: Comparison to bool Signed-off-by: YANG LI <[email protected]> Reported-by: Abaci Robot<[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Will Deacon <[email protected]>
2021-01-19selftests: forwarding: Fix spelling mistake "succeded" -> "succeeded"Colin Ian King1-2/+2
There are two spelling mistakes in check_fail messages. Fix them. Signed-off-by: Colin Ian King <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2021-01-19selftests: net: fib_tests: remove duplicate log testHangbin Liu1-1/+0
The previous test added an address with a specified metric and check if correspond route was created. I somehow added two logs for the same test. Remove the duplicated one. Reported-by: Antoine Tenart <[email protected]> Fixes: 0d29169a708b ("selftests/net/fib_tests: update addr_metric_test for peer route testing") Signed-off-by: Hangbin Liu <[email protected]> Reviewed-by: David Ahern <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2021-01-20selftests/powerpc: Only test lwm/stmw on big endianMichael Ellerman1-1/+4
Newer binutils (>= 2.36) refuse to assemble lmw/stmw when building in little endian mode. That breaks compilation of our alignment handler test: /tmp/cco4l14N.s: Assembler messages: /tmp/cco4l14N.s:1440: Error: `lmw' invalid when little-endian /tmp/cco4l14N.s:1814: Error: `stmw' invalid when little-endian make[2]: *** [../../lib.mk:139: /output/kselftest/powerpc/alignment/alignment_handler] Error 1 These tests do pass on little endian machines, as the kernel will still emulate those instructions even when running little endian (which is arguably a kernel bug). But we don't really need to test that case, so ifdef those instructions out to get the alignment test building again. Reported-by: Libor Pechacek <[email protected]> Signed-off-by: Michael Ellerman <[email protected]> Tested-by: Libor Pechacek <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2021-01-19selftests/powerpc: Fix exit status of pkey testsSandipan Das2-2/+2
Since main() does not return a value explicitly, the return values from FAIL_IF() conditions are ignored and the tests can still pass irrespective of failures. This makes sure that we always explicitly return the correct test exit status. Fixes: 1addb6444791 ("selftests/powerpc: Add test for execute-disabled pkeys") Fixes: c27f2fd1705a ("selftests/powerpc: Add test for pkey siginfo verification") Reported-by: Eirik Fuller <[email protected]> Signed-off-by: Sandipan Das <[email protected]> Signed-off-by: Michael Ellerman <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2021-01-18tools: gpio: fix %llu warning in gpio-watch.cKent Gibson1-2/+3
Some platforms, such as mips64, don't map __u64 to long long unsigned int so using %llu produces a warning: gpio-watch.c: In function ‘main’: gpio-watch.c:89:30: warning: format ‘%llu’ expects argument of type ‘long long unsigned int’, but argument 4 has type ‘__u64’ {aka ‘long unsigned int’} [-Wformat=] 89 | printf("line %u: %s at %llu\n", | ~~~^ | | | long long unsigned int | %lu 90 | chg.info.offset, event, chg.timestamp_ns); | ~~~~~~~~~~~~~~~~ | | | __u64 {aka long unsigned int} Replace the %llu with PRIu64 and cast the argument to uint64_t. Fixes: 33f0c47b8fb4 ("tools: gpio: implement gpio-watch") Signed-off-by: Kent Gibson <[email protected]> Signed-off-by: Bartosz Golaszewski <[email protected]>
2021-01-18tools: gpio: fix %llu warning in gpio-event-mon.cKent Gibson1-2/+2
Some platforms, such as mips64, don't map __u64 to long long unsigned int so using %llu produces a warning: gpio-event-mon.c:110:37: warning: format ‘%llu’ expects argument of type ‘long long unsigned int’, but argument 3 has type ‘__u64’ {aka ‘long unsigned int’} [-Wformat=] 110 | fprintf(stdout, "GPIO EVENT at %llu on line %d (%d|%d) ", | ~~~^ | | | long long unsigned int | %lu 111 | event.timestamp_ns, event.offset, event.line_seqno, | ~~~~~~~~~~~~~~~~~~ | | | __u64 {aka long unsigned int} Replace the %llu with PRIu64 and cast the argument to uint64_t. Fixes: 03fd11b03362 ("tools/gpio/gpio-event-mon: fix warning") Signed-off-by: Kent Gibson <[email protected]> Signed-off-by: Bartosz Golaszewski <[email protected]>
2021-01-17Merge tag 'perf-tools-fixes-2021-01-17' of ↵Linus Torvalds12-208/+224
git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux Pull perf tools fixes from Arnaldo Carvalho de Melo: - Fix 'CPU too large' error in Intel PT - Correct event attribute sizes in 'perf inject' - Sync build_bug.h and kvm.h kernel copies - Fix bpf.h header include directive in 5sec.c 'perf trace' bpf example - libbpf tests fixes - Fix shadow stat 'perf test' for non-bash shells - Take cgroups into account for shadow stats in 'perf stat' * tag 'perf-tools-fixes-2021-01-17' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux: perf inject: Correct event attribute sizes perf intel-pt: Fix 'CPU too large' error perf stat: Take cgroups into account for shadow stats perf stat: Introduce struct runtime_stat_data libperf tests: Fail when failing to get a tracepoint id libperf tests: If a test fails return non-zero libperf tests: Avoid uninitialized variable warning perf test: Fix shadow stat test for non-bash shells tools headers: Syncronize linux/build_bug.h with the kernel sources tools headers UAPI: Sync kvm.h headers with the kernel sources perf bpf examples: Fix bpf.h header include directive in 5sec.c example
2021-01-15GTP: add support for flow based tunneling APIPravin B Shelar1-0/+1
Following patch add support for flow based tunneling API to send and recv GTP tunnel packet over tunnel metadata API. This would allow this device integration with OVS or eBPF using flow based tunneling APIs. Signed-off-by: Pravin B Shelar <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2021-01-15Merge https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-nextJakub Kicinski35-156/+1408
Daniel Borkmann says: ==================== pull-request: bpf-next 2021-01-16 1) Extend atomic operations to the BPF instruction set along with x86-64 JIT support, that is, atomic{,64}_{xchg,cmpxchg,fetch_{add,and,or,xor}}, from Brendan Jackman. 2) Add support for using kernel module global variables (__ksym externs in BPF programs) retrieved via module's BTF, from Andrii Nakryiko. 3) Generalize BPF stackmap's buildid retrieval and add support to have buildid stored in mmap2 event for perf, from Jiri Olsa. 4) Various fixes for cross-building BPF sefltests out-of-tree which then will unblock wider automated testing on ARM hardware, from Jean-Philippe Brucker. 5) Allow to retrieve SOL_SOCKET opts from sock_addr progs, from Daniel Borkmann. 6) Clean up driver's XDP buffer init and split into two helpers to init per- descriptor and non-changing fields during processing, from Lorenzo Bianconi. 7) Minor misc improvements to libbpf & bpftool, from Ian Rogers. * https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: (41 commits) perf: Add build id data in mmap2 event bpf: Add size arg to build_id_parse function bpf: Move stack_map_get_build_id into lib bpf: Document new atomic instructions bpf: Add tests for new BPF atomic operations bpf: Add bitwise atomic instructions bpf: Pull out a macro for interpreting atomic ALU operations bpf: Add instructions for atomic_[cmp]xchg bpf: Add BPF_FETCH field / create atomic_fetch_add instruction bpf: Move BPF_STX reserved field check into BPF_STX verifier code bpf: Rename BPF_XADD and prepare to encode other atomics in .imm bpf: x86: Factor out a lookup table for some ALU opcodes bpf: x86: Factor out emission of REX byte bpf: x86: Factor out emission of ModR/M for *(reg + off) tools/bpftool: Add -Wall when building BPF programs bpf, libbpf: Avoid unused function warning on bpf_tail_call_static selftests/bpf: Install btf_dump test cases selftests/bpf: Fix installation of urandom_read selftests/bpf: Move generated test files to $(TEST_GEN_FILES) selftests/bpf: Fix out-of-tree build ... ==================== Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2021-01-15kunit: tool: move kunitconfig parsing into __init__, make it optionalDaniel Latypov2-28/+17
LinuxSourceTree will unceremoniously crash if the user doesn't call read_kunitconfig() first in a number of functions. And currently every place we create an instance, the caller also calls create_kunitconfig() and read_kunitconfig(). Move these instead into __init__() so they can't be forgotten and to reduce copy-paste. The https://github.com/google/pytype type-checker complained that _config wasn't initialized. With this, kunit_tool now type checks under both pytype and mypy. Add an optional boolean that can be used to disable this for use cases in the future where we might not need/want to load the config. Signed-off-by: Daniel Latypov <[email protected]> Reviewed-by: Brendan Higgins <[email protected]> Tested-by: Brendan Higgins <[email protected]> Signed-off-by: Shuah Khan <[email protected]>
2021-01-15kunit: tool: fix minor typing issue with None statusDaniel Latypov1-9/+8
The code to handle aggregating statuses didn't check that the status actually got set to some non-None value. Default the value to SUCCESS instead of adding a bunch of `is None` checks. This sorta follows the precedent in commit 3fc48259d525 ("kunit: Don't fail test suites if one of them is empty"). Also slightly simplify the code and add type annotations. Signed-off-by: Daniel Latypov <[email protected]> Reviewed-by: David Gow <[email protected]> Reviewed-by: Brendan Higgins <[email protected]> Tested-by: Brendan Higgins <[email protected]> Signed-off-by: Shuah Khan <[email protected]>
2021-01-15kunit: tool: surface and address more typing issuesDaniel Latypov5-52/+54
The authors of this tool were more familiar with a different type-checker, https://github.com/google/pytype. That's open source, but mypy seems more prevalent (and runs faster). And unlike pytype, mypy doesn't try to infer types so it doesn't check unanotated functions. So annotate ~all functions in kunit tool to increase type-checking coverage. Note: per https://www.python.org/dev/peps/pep-0484/, `__init__()` should be annotated as `-> None`. Doing so makes mypy discover a number of new violations. Exclude main() since we reuse `request` for the different types of requests, which mypy isn't happy about. This commit fixes all but one error, where `TestSuite.status` might be None. Signed-off-by: Daniel Latypov <[email protected]> Reviewed-by: David Gow <[email protected]> Tested-by: Brendan Higgins <[email protected]> Acked-by: Brendan Higgins <[email protected]> Signed-off-by: Shuah Khan <[email protected]>
2021-01-15kunit: tool: Fix spelling of "diagnostic" in kunit_parserDavid Gow1-12/+12
Various helper functions were misspelling "diagnostic" in their names. It finally got annoying, so fix it. Signed-off-by: David Gow <[email protected]> Reviewed-by: Brendan Higgins <[email protected]> Tested-by: Brendan Higgins <[email protected]> Signed-off-by: Shuah Khan <[email protected]>
2021-01-15Merge https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpfJakub Kicinski5-103/+102
Daniel Borkmann says: ==================== pull-request: bpf 2021-01-16 1) Fix a double bpf_prog_put() for BPF_PROG_{TYPE_EXT,TYPE_TRACING} types in link creation's error path causing a refcount underflow, from Jiri Olsa. 2) Fix BTF validation errors for the case where kernel modules don't declare any new types and end up with an empty BTF, from Andrii Nakryiko. 3) Fix BPF local storage helpers to first check their {task,inode} owners for being NULL before access, from KP Singh. 4) Fix a memory leak in BPF setsockopt handling for the case where optlen is zero and thus temporary optval buffer should be freed, from Stanislav Fomichev. 5) Fix a syzbot memory allocation splat in BPF_PROG_TEST_RUN infra for raw_tracepoint caused by too big ctx_size_in, from Song Liu. 6) Fix LLVM code generation issues with verifier where PTR_TO_MEM{,_OR_NULL} registers were spilled to stack but not recognized, from Gilad Reti. * https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf: MAINTAINERS: Update my email address selftests/bpf: Add verifier test for PTR_TO_MEM spill bpf: Support PTR_TO_MEM{,_OR_NULL} register spilling bpf: Reject too big ctx_size_in for raw_tp test run libbpf: Allow loading empty BTFs bpf: Allow empty module BTFs bpf: Don't leak memory in bpf getsockopt when optlen == 0 bpf: Update local storage test to check handling of null ptrs bpf: Fix typo in bpf_inode_storage.c bpf: Local storage helpers should check nullness of owner ptr passed bpf: Prevent double bpf_prog_put call from bpf_tracing_prog_attach ==================== Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2021-01-15Merge tag 'arm64-fixes' of ↵Linus Torvalds2-2/+2
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux Pull arm64 fixes from Catalin Marinas: - Set the minimum GCC version to 5.1 for arm64 due to earlier compiler bugs. - Make atomic helpers __always_inline to avoid a section mismatch when compiling with clang. - Fix the CMA and crashkernel reservations to use ZONE_DMA (remove the arm64_dma32_phys_limit variable, no longer needed with a dynamic ZONE_DMA sizing in 5.11). - Remove redundant IRQ flag tracing that was leaving lockdep inconsistent with the hardware state. - Revert perf events based hard lockup detector that was causing smp_processor_id() to be called in preemptible context. - Some trivial cleanups - spelling fix, renaming S_FRAME_SIZE to PT_REGS_SIZE, function prototypes added. * tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: arm64: selftests: Fix spelling of 'Mismatch' arm64: syscall: include prototype for EL0 SVC functions compiler.h: Raise minimum version of GCC to 5.1 for arm64 arm64: make atomic helpers __always_inline arm64: rename S_FRAME_SIZE to PT_REGS_SIZE Revert "arm64: Enable perf events based hard lockup detector" arm64: entry: remove redundant IRQ flag tracing arm64: Remove arm64_dma32_phys_limit and its uses
2021-01-15perf inject: Correct event attribute sizesAl Grant1-0/+8
When 'perf inject' reads a perf.data file from an older version of perf, it writes event attributes into the output with the original size field, but lays them out as if they had the size currently used. Readers see a corrupt file. Update the size field to match the layout. Signed-off-by: Al Grant <[email protected]> Acked-by: Jiri Olsa <[email protected]> Cc: Alexander Shishkin <[email protected]> Cc: Mark Rutland <[email protected]> Cc: Namhyung Kim <[email protected]> Cc: Peter Zijlstra <[email protected]> Link: http://lore.kernel.org/lkml/[email protected] Signed-off-by: Denis Nikitin <[email protected]> Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2021-01-15perf intel-pt: Fix 'CPU too large' errorAdrian Hunter2-3/+3
In some cases, the number of cpus (nr_cpus_online) is confused with the maximum cpu number (nr_cpus_avail), which results in the error in the example below: Example on system with 8 cpus: Before: # echo 0 > /sys/devices/system/cpu/cpu2/online # ./perf record --kcore -e intel_pt// taskset --cpu-list 7 uname Linux [ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 0.147 MB perf.data ] # ./perf script --itrace=e Requested CPU 7 too large. Consider raising MAX_NR_CPUS 0x25908 [0x8]: failed to process type: 68 [Invalid argument] After: # ./perf script --itrace=e # Fixes: 8c7274691f0d ("perf machine: Replace MAX_NR_CPUS with perf_env::nr_cpus_online") Fixes: 7df4e36a4785 ("perf session: Replace MAX_NR_CPUS with perf_env::nr_cpus_online") Signed-off-by: Adrian Hunter <[email protected]> Tested-by: Kan Liang <[email protected]> Cc: Jiri Olsa <[email protected]> Cc: [email protected] Link: http://lore.kernel.org/lkml/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2021-01-15perf stat: Take cgroups into account for shadow statsNamhyung Kim1-7/+19
As of now it doesn't consider cgroups when collecting shadow stats and metrics so counter values from different cgroups will be saved in a same slot. This resulted in incorrect numbers when those cgroups have different workloads. For example, let's look at the scenario below: cgroups A and C runs same workload which burns a cpu while cgroup B runs a light workload. $ perf stat -a -e cycles,instructions --for-each-cgroup A,B,C sleep 1 Performance counter stats for 'system wide': 3,958,116,522 cycles A 6,722,650,929 instructions A # 2.53 insn per cycle 1,132,741 cycles B 571,743 instructions B # 0.00 insn per cycle 4,007,799,935 cycles C 6,793,181,523 instructions C # 2.56 insn per cycle 1.001050869 seconds time elapsed When I run 'perf stat' with single workload, it usually shows IPC around 1.7. We can verify it (6,722,650,929.0 / 3,958,116,522 = 1.698) for cgroup A. But in this case, since cgroups are ignored, cycles are averaged so it used the lower value for IPC calculation and resulted in around 2.5. avg cycle: (3958116522 + 1132741 + 4007799935) / 3 = 2655683066 IPC (A) : 6722650929 / 2655683066 = 2.531 IPC (B) : 571743 / 2655683066 = 0.0002 IPC (C) : 6793181523 / 2655683066 = 2.557 We can simply compare cgroup pointers in the evsel and it'll be NULL when cgroups are not specified. With this patch, I can see correct numbers like below: $ perf stat -a -e cycles,instructions --for-each-cgroup A,B,C sleep 1 Performance counter stats for 'system wide': 4,171,051,687 cycles A 7,219,793,922 instructions A # 1.73 insn per cycle 1,051,189 cycles B 583,102 instructions B # 0.55 insn per cycle 4,171,124,710 cycles C 7,192,944,580 instructions C # 1.72 insn per cycle 1.007909814 seconds time elapsed Signed-off-by: Namhyung Kim <[email protected]> Acked-by: Jiri Olsa <[email protected]> Cc: Alexander Shishkin <[email protected]> Cc: Andi Kleen <[email protected]> Cc: Ian Rogers <[email protected]> Cc: Jin Yao <[email protected]> Cc: Mark Rutland <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: Stephane Eranian <[email protected]> Link: http://lore.kernel.org/lkml/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2021-01-15perf stat: Introduce struct runtime_stat_dataNamhyung Kim1-173/+173
To pass more info to the saved_value in the runtime_stat, add a new struct runtime_stat_data. Currently it only has 'ctx' field but later patch will add more. Note that we intentionally pass 0 as ctx to clock-related events for compatibility. It was already there in a few places. So move the code into the saved_value_lookup() explicitly and add a comment. Suggested-by: Andi Kleen <[email protected]> Signed-off-by: Namhyung Kim <[email protected]> Acked-by: Jiri Olsa <[email protected]> Cc: Alexander Shishkin <[email protected]> Cc: Andi Kleen <[email protected]> Cc: Ian Rogers <[email protected]> Cc: Jin Yao <[email protected]> Cc: Mark Rutland <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: Stephane Eranian <[email protected]> Link: http://lore.kernel.org/lkml/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2021-01-15libperf tests: Fail when failing to get a tracepoint idIan Rogers1-0/+1
Permissions are necessary to get a tracepoint id. Fail the test when the read fails. Signed-off-by: Ian Rogers <[email protected]> Acked-by: Jiri Olsa <[email protected]> Cc: Alexander Shishkin <[email protected]> Cc: Mark Rutland <[email protected]> Cc: Namhyung Kim <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: Stephane Eranian <[email protected]> Link: http://lore.kernel.org/lkml/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2021-01-15libperf tests: If a test fails return non-zeroIan Rogers4-4/+4
If a test fails return -1 rather than 0. This is consistent with the return value in test-cpumap.c Signed-off-by: Ian Rogers <[email protected]> Acked-by: Jiri Olsa <[email protected]> Cc: Alexander Shishkin <[email protected]> Cc: Mark Rutland <[email protected]> Cc: Namhyung Kim <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: Stephane Eranian <[email protected]> Link: http://lore.kernel.org/lkml/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2021-01-15libperf tests: Avoid uninitialized variable warningIan Rogers1-2/+2
The variable 'bf' is read (for a write call) without being initialized triggering a memory sanitizer warning. Use 'bf' in the read and switch the write to reading from a string. Signed-off-by: Ian Rogers <[email protected]> Acked-by: Jiri Olsa <[email protected]> Acked-by: Namhyung Kim <[email protected]> Cc: Alexander Shishkin <[email protected]> Cc: Mark Rutland <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: Stephane Eranian <[email protected]> Link: http://lore.kernel.org/lkml/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2021-01-15perf test: Fix shadow stat test for non-bash shellsNamhyung Kim1-16/+14
It was using some bash-specific features and failed to parse when running with a different shell like below: root@kbl-ppc:~/kbl-ws/perf-dev/lck-9077/acme.tmp/tools/perf# ./perf test 83 -vv 83: perf stat metrics (shadow stat) test : --- start --- test child forked, pid 3922 ./tests/shell/stat+shadow_stat.sh: 19: ./tests/shell/stat+shadow_stat.sh: [[: not found ./tests/shell/stat+shadow_stat.sh: 24: ./tests/shell/stat+shadow_stat.sh: [[: not found ./tests/shell/stat+shadow_stat.sh: 30: ./tests/shell/stat+shadow_stat.sh: [[: not found (standard_in) 2: syntax error ./tests/shell/stat+shadow_stat.sh: 36: ./tests/shell/stat+shadow_stat.sh: [[: not found ./tests/shell/stat+shadow_stat.sh: 19: ./tests/shell/stat+shadow_stat.sh: [[: not found ./tests/shell/stat+shadow_stat.sh: 24: ./tests/shell/stat+shadow_stat.sh: [[: not found ./tests/shell/stat+shadow_stat.sh: 30: ./tests/shell/stat+shadow_stat.sh: [[: not found (standard_in) 2: syntax error ./tests/shell/stat+shadow_stat.sh: 36: ./tests/shell/stat+shadow_stat.sh: [[: not found ./tests/shell/stat+shadow_stat.sh: 45: ./tests/shell/stat+shadow_stat.sh: declare: not found test child finished with -1 ---- end ---- perf stat metrics (shadow stat) test: FAILED! Reported-by: Jin Yao <[email protected]> Signed-off-by: Namhyung Kim <[email protected]> Acked-by: Jiri Olsa <[email protected]> Cc: Alexander Shishkin <[email protected]> Cc: Andi Kleen <[email protected]> Cc: David Laight <[email protected]> Cc: Ian Rogers <[email protected]> Cc: Mark Rutland <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: Stephane Eranian <[email protected]> Link: http://lore.kernel.org/lkml/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
Powered by cgit, Gruvboxed by Blaster4385.