| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Since the mptcp_join script is becoming too big, this patch splits it
into several smaller chunks, each of them has been defined in a function
as a individual test group for several related testcases.
Using bash getopts function to parse command line arguments, and invoke
each function to do the individual test group.
Here are all the arguments:
-f subflows_tests
-s signal_address_tests
-l link_failure_tests
-t add_addr_timeout_tests
-r remove_tests
-a add_tests
-6 ipv6_tests
-4 v4mapped_tests
-b backup_tests
-p add_addr_ports_tests
-c syncookies_tests
-h help
Run mptcp_join.sh with no argument will execute all testcases.
Signed-off-by: Geliang Tang <[email protected]>
Signed-off-by: Mat Martineau <[email protected]>
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
Michael Kerrisk suggested that, from an API perspective, it is a bad
idea to share the PR_SYS_DISPATCH_ defines between the prctl operation
and the selector variable.
Therefore, define two new constants to be used by SUD's selector variable
and update the corresponding documentation and test cases.
While this changes the API syscall user dispatch has never been part of a
Linux release, it will show up for the first time in 5.11.
Suggested-by: Michael Kerrisk (man-pages) <[email protected]>
Signed-off-by: Gabriel Krisman Bertazi <[email protected]>
Signed-off-by: Thomas Gleixner <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
|
|
In a real dma mapping user case, after dma_map is done, data will be
transmit. Thus, in multi-threaded user scenario, IOMMU contention
should not be that severe. For example, if users enable multiple
threads to send network packets through 1G/10G/100Gbps NIC, usually
the steps will be: map -> transmission -> unmap. Transmission delay
reduces the contention of IOMMU.
Here a delay is added to simulate the transmission between map and unmap
so that the tested result could be more accurate for TX and simple RX.
A typical TX transmission for NIC would be like: map -> TX -> unmap
since the socket buffers come from OS. Simple RX model eg. disk driver,
is also map -> RX -> unmap, but real RX model in a NIC could be more
complicated considering packets can come spontaneously and many drivers
are using pre-mapped buffers pool. This is in the TBD list.
Signed-off-by: Barry Song <[email protected]>
Signed-off-by: Christoph Hellwig <[email protected]>
|
|
The original code put five u32 before a u64 expansion[10] array. Five is
odd, this will cause trouble in the extension of the structure by adding
new features. This patch moves to use u8 for reserved field to avoid
future alignment risk.
Meanwhile, it also clears the memory of struct map_benchmark in tools,
otherwise, if users use old version to run on newer kernel, the random
expansion value will cause side effect on newer kernel.
Signed-off-by: Barry Song <[email protected]>
Signed-off-by: Christoph Hellwig <[email protected]>
|
|
Pablo Neira Ayuso says:
====================
Netfilter fixes for net
1) Fix combination of --reap and --update in xt_recent that triggers
UAF, from Jozsef Kadlecsik.
2) Fix current year in nft_meta selftest, from Fabian Frederick.
3) Fix possible UAF in the netns destroy path of nftables.
4) Fix incorrect checksum calculation when mangling ports in flowtable,
from Sven Auhagen.
* git://git.kernel.org/pub/scm/linux/kernel/git/pablo/nf:
netfilter: flowtable: fix tcp and udp header checksum update
netfilter: nftables: fix possible UAF over chains from packet path in netns
selftests: netfilter: fix current year
netfilter: xt_recent: Fix attempt to update deleted entry
====================
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
PACKET_TX_TIMESTAMP is defined in if_packet.h but it is not included in
test. Include it instead of <netpacket/packet.h> otherwise the error of
redefinition arrives.
Also fix the compiler warning about ambiguous control flow by adding
explicit braces.
Fixes: 8fe2f761cae9 ("net-timestamp: expand documentation")
Suggested-by: Willem de Bruijn <[email protected]>
Signed-off-by: Vadim Fedorenko <[email protected]>
Acked-by: Willem de Bruijn <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
Instead of using shared global variables between userspace and BPF, use
the ring buffer to send the IMA hash on the BPF ring buffer. This helps
in validating both IMA and the usage of the ringbuffer in sleepable
programs.
Signed-off-by: KP Singh <[email protected]>
Signed-off-by: Andrii Nakryiko <[email protected]>
Link: https://lore.kernel.org/bpf/[email protected]
|
|
Add a short note to make contributors aware of the existence of the
script. The documentation does not intentionally document all the
options of the script to avoid mentioning it in two places (it's
available in the usage / help message of the script).
Signed-off-by: KP Singh <[email protected]>
Signed-off-by: Andrii Nakryiko <[email protected]>
Link: https://lore.kernel.org/bpf/[email protected]
|
|
The script runs the BPF selftests locally on the same kernel image
as they would run post submit in the BPF continuous integration
framework.
The goal of the script is to allow contributors to run selftests locally
in the same environment to check if their changes would end up breaking
the BPF CI and reduce the back-and-forth between the maintainers and the
developers.
Signed-off-by: KP Singh <[email protected]>
Signed-off-by: Andrii Nakryiko <[email protected]>
Tested-by: Jiri Olsa <[email protected]>
Link: https://lore.kernel.org/bpf/[email protected]
|
|
This reverts commit 9ab7e76aefc97a9aa664accb59d6e8dc5e52514a.
This patch was committed without maintainer approval and despite a number
of unaddressed concerns from review. There are several issues that
impede the acceptance of this patch and that make a reversion of this
particular instance of these changes the best way forward:
i) the patch contains several logically separate changes that would be
better served as smaller patches (for review purposes)
ii) functionality like the handling of end markers has been introduced
without further explanation
iii) symmetry between the handling of GTPv0 and GTPv1 has been
unnecessarily broken
iv) the patchset produces 'broken' packets when extension headers are
included
v) there are no available userspace tools to allow for testing this
functionality
vi) there is an unaddressed Coverity report against the patch concering
memory leakage
vii) most importantly, the patch contains a large amount of superfluous
churn that impedes other ongoing work with this driver
This patch will be reworked into a series that aligns with other
ongoing work and facilitates review.
Signed-off-by: Jonas Bonn <[email protected]>
Acked-by: Harald Welte <[email protected]>
Acked-by: Pravin B Shelar <[email protected]>
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
Instead of adding a plethora of new KVM_CAP_XEN_FOO capabilities, just
add bits to the return value of KVM_CAP_XEN_HVM.
Signed-off-by: David Woodhouse <[email protected]>
|
|
Disambiguate Xen vs. Hyper-V calls by adding 'orl $0x80000000, %eax'
at the start of the Hyper-V hypercall page when Xen hypercalls are
also enabled.
That bit is reserved in the Hyper-V ABI, and those hypercall numbers
will never be used by Xen (because it does precisely the same trick).
Switch to using kvm_vcpu_write_guest() while we're at it, instead of
open-coding it.
Signed-off-by: David Woodhouse <[email protected]>
|
|
Add a new exit reason for emulator to handle Xen hypercalls.
Since this means KVM owns the ABI, dispense with the facility for the
VMM to provide its own copy of the hypercall pages; just fill them in
directly using VMCALL/VMMCALL as we do for the Hyper-V hypercall page.
This behaviour is enabled by a new INTERCEPT_HCALL flag in the
KVM_XEN_HVM_CONFIG ioctl structure, and advertised by the same flag
being returned from the KVM_CAP_XEN_HVM check.
Rename xen_hvm_config() to kvm_xen_write_hypercall_page() and move it
to the nascent xen.c while we're at it, and add a test case.
Signed-off-by: Joao Martins <[email protected]>
Signed-off-by: David Woodhouse <[email protected]>
|
|
KVM_GET_SUPPORTED_CPUID
Commit 181f494888d5 ("KVM: x86: fix CPUID entries returned by
KVM_GET_CPUID2 ioctl") revealed that we're not testing KVM_GET_CPUID2
ioctl at all. Add a test for it and also check that from inside the guest
visible CPUIDs are equal to it's output.
Signed-off-by: Vitaly Kuznetsov <[email protected]>
Message-Id: <[email protected]>
Signed-off-by: Paolo Bonzini <[email protected]>
|
|
This test will check the effect of various CPUID settings on the
MSR_IA32_PERF_CAPABILITIES MSR, check that whatever user space writes
with KVM_SET_MSR is _not_ modified from the guest and can be retrieved
with KVM_GET_MSR, and check that invalid LBR formats are rejected.
Signed-off-by: Like Xu <[email protected]>
Message-Id: <[email protected]>
Signed-off-by: Paolo Bonzini <[email protected]>
|
|
Disabling dirty logging is much more intestesting from a testing
perspective if the vCPUs are still running. This also excercises the
code-path in which collapsible SPTEs must be faulted back in at a higher
level after disabling dirty logging.
To: [email protected]
CC: Peter Xu <[email protected]>
CC: Andrew Jones <[email protected]>
CC: Thomas Huth <[email protected]>
Signed-off-by: Ben Gardon <[email protected]>
Message-Id: <[email protected]>
Signed-off-by: Paolo Bonzini <[email protected]>
|
|
Add a parameter to control the backing memory type for
dirty_log_perf_test so that the test can be run with hugepages.
To: [email protected]
CC: Peter Xu <[email protected]>
CC: Andrew Jones <[email protected]>
CC: Thomas Huth <[email protected]>
Signed-off-by: Ben Gardon <[email protected]>
Message-Id: <[email protected]>
Signed-off-by: Paolo Bonzini <[email protected]>
|
|
Add a memslot modification stress test in which a memslot is repeatedly
created and removed while vCPUs access memory in another memslot. Most
userspaces do not create or remove memslots on running VMs which makes
it hard to test races in adding and removing memslots without a
dedicated test. Adding and removing a memslot also has the effect of
tearing down the entire paging structure, which leads to more page
faults and pressure on the page fault handling path than a one-and-done
memory population test.
Reviewed-by: Jacob Xu <[email protected]>
Signed-off-by: Ben Gardon <[email protected]>
Message-Id: <[email protected]>
Signed-off-by: Paolo Bonzini <[email protected]>
|
|
Add an option to overlap the ranges of memory each vCPU accesses instead
of partitioning them. This option will increase the probability of
multiple vCPUs faulting on the same page at the same time, and causing
interesting races, if there are bugs in the page fault handler or
elsewhere in the kernel.
Reviewed-by: Jacob Xu <[email protected]>
Reviewed-by: Makarand Sonare <[email protected]>
Signed-off-by: Ben Gardon <[email protected]>
Message-Id: <[email protected]>
Signed-off-by: Paolo Bonzini <[email protected]>
|
|
Currently the population stage in the dirty_log_perf_test does nothing
as the per-vCPU iteration counters are not initialized and the loop does
not wait for each vCPU. Remedy those errors.
Reviewed-by: Jacob Xu <[email protected]>
Reviewed-by: Makarand Sonare <[email protected]>
Signed-off-by: Ben Gardon <[email protected]>
Message-Id: <[email protected]>
Signed-off-by: Paolo Bonzini <[email protected]>
|
|
In order to add an iteration -1 to indicate that the memory population
phase has not yet completed, convert the interations counters to ints.
No functional change intended.
Reviewed-by: Jacob Xu <[email protected]>
Signed-off-by: Ben Gardon <[email protected]>
Message-Id: <[email protected]>
Signed-off-by: Paolo Bonzini <[email protected]>
|
|
Peter Xu pointed out that a log message printed while waiting for the
memory population phase of the dirty_log_perf_test will flood the debug
logs as there is no delay after printing the message. Since the message
does not provide much value anyway, remove it.
Reviewed-by: Jacob Xu <[email protected]>
Signed-off-by: Ben Gardon <[email protected]>
Message-Id: <[email protected]>
Signed-off-by: Paolo Bonzini <[email protected]>
|
|
In response to some earlier comments from Peter Xu, rename
timespec_diff_now to the much more sensible timespec_elapsed.
No functional change intended.
Reviewed-by: Jacob Xu <[email protected]>
Reviewed-by: Makarand Sonare <[email protected]>
Signed-off-by: Ben Gardon <[email protected]>
Message-Id: <[email protected]>
Signed-off-by: Paolo Bonzini <[email protected]>
|
|
When a guest is using xAPIC KVM allocates a backing page for the required
EPT entry for the APIC access address set in the VMCS. If mm decides to
move that page the KVM mmu notifier will update the VMCS with the new
HPA. This test induces a page move to test that APIC access continues to
work correctly. It is a directed test for
commit e649b3f0188f "KVM: x86: Fix APIC page invalidation race".
Tested: ran for 1 hour on a skylake, migrating backing page every 1ms
Depends on patch "selftests: kvm: Add exception handling to selftests"
from [email protected] that has not yet been queued.
Signed-off-by: Peter Shier <[email protected]>
Reviewed-by: Jim Mattson <[email protected]>
Reviewed-by: Ricardo Koller <[email protected]>
Message-Id: <[email protected]>
Signed-off-by: Paolo Bonzini <[email protected]>
|
|
TLS selftests were broken also because of use of structure that
was not exported to UAPI. Fix by defining the union in tests.
Fixes: 4f336e88a870 (selftests/tls: add CHACHA20-POLY1305 to tls selftests)
Reported-by: Rong Chen <[email protected]>
Signed-off-by: Vadim Fedorenko <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
Test that setting lanes parameter is working.
Set max speed and max lanes in the list of advertised link modes,
and then try to set max speed with the lanes below max lanes if exists
in the list.
And then, test that setting number of lanes larger than max lanes fails.
Do the above for both autoneg on and off.
$ ./ethtool_lanes.sh
TEST: 4 lanes is autonegotiated [ OK ]
TEST: Lanes number larger than max width is not set [ OK ]
TEST: Autoneg off, 4 lanes detected during force mode [ OK ]
TEST: Lanes number larger than max width is not set [ OK ]
Signed-off-by: Danielle Ratson <[email protected]>
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
Libbpf's Makefile relies on Linux tools infrastructure's feature detection
framework, but libbpf's needs are very modest: it detects the presence of
libelf and libz, both of which are mandatory. So it doesn't benefit much from
the framework, but pays significant costs in terms of maintainability and
debugging experience, when something goes wrong. The other feature detector,
testing for the presernce of minimal BPF API in system headers is long
obsolete as well, providing no value.
So stop using feature detection and just assume the presence of libelf and
libz during build time. Worst case, user will get a clear and actionable
linker error, e.g.:
/usr/bin/ld: cannot find -lelf
On the other hand, we completely bypass recurring issues various users
reported over time with false negatives of feature detection (libelf or libz
not being detected, while they are actually present in the system).
Signed-off-by: Andrii Nakryiko <[email protected]>
Signed-off-by: Daniel Borkmann <[email protected]>
Acked-by: John Fastabend <[email protected]>
Acked-by: Randy Dunlap <[email protected]>
Link: https://lore.kernel.org/bpf/[email protected]
|
|
use date %Y instead of %G to read current year
Problem appeared when running lkp-tests on 01/01/2021
Fixes: 48d072c4e8cd ("selftests: netfilter: add time counter check")
Reported-by: kernel test robot <[email protected]>
Signed-off-by: Fabian Frederick <[email protected]>
Signed-off-by: Pablo Neira Ayuso <[email protected]>
|
|
This patch adds support to verifier tests to check for a succession of
verifier log messages on program load failure. This makes the errstr
field work uniformly across REJECT and VERBOSE_ACCEPT checks.
This patch also increases the maximum size of a message in the series of
messages to test from 80 chars to 200 chars. This is in order to keep
existing tests working, which sometimes test for messages larger than 80
chars (which was accepted in the REJECT case, when testing for a single
message, but not in the VERBOSE_ACCEPT case, when testing for possibly
multiple messages).
And example of such a long, checked message is in bounds.c: "R1 has
unknown scalar with mixed signed bounds, pointer arithmetic with it
prohibited for !root"
Signed-off-by: Andrei Matei <[email protected]>
Signed-off-by: Daniel Borkmann <[email protected]>
Acked-by: Song Liu <[email protected]>
Link: https://lore.kernel.org/bpf/[email protected]
|
|
Avoid a naming conflict with for_each_event with similar code in
parse-events.c, rename to for_each_event_tps.
Signed-off-by: Ian Rogers <[email protected]>
Cc: Alexander Shishkin <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Mark Rutland <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Stephane Eranian <[email protected]>
Link: http://lore.kernel.org/lkml/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
To pick up fixes
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
Running "perf mem report" in TUI mode fails with ENOMEM message in
powerpc:
failed to process sample
Running with debug and verbose options points that issue is while
allocating memory for sample histograms.
The error path is:
symbol__inc_addr_samples() ->
__symbol__inc_addr_samples() ->
annotated_source__histogram()
symbol__inc_addr_samples() calls annotated_source__alloc_histograms ()
to allocate memory for sample histograms using calloc(). Here calloc()
fails since the size of symbol is huge. The size of a symbol is
calculated as difference between its start and end address.
Example histogram allocation that fails is:
sym->name is _end
sym->start is 0xc0000000027a0000
sym->end is 0xc008000003890000
symbol__size(sym) is 0x80000010f0000
In the above case, the difference between sym->start
(0xc0000000027a0000) and sym->end (0xc008000003890000) is huge.
This is same problem as in s390 and arm64 which are fixed in commits:
b9c0a64901d5 ("perf annotate: Fix s390 gap between kernel end and module start")
78886f3ed37e ("perf symbols: Fix arm64 gap between kernel start and module end")
When this symbol was read first, its start and end address was set to
address which matches with data from /proc/kallsyms.
After symbol__new():
symbol__new: _end 0xc0000000027a0000-0xc0000000027a0000
From /proc/kallsyms:
...
c000000002799370 b backtrace_flag
c000000002799378 B radix_tree_node_cachep
c000000002799380 B __bss_stop
c0000000027a0000 B _end
c008000003890000 t icmp_checkentry [ip_tables]
c008000003890038 t ipt_alloc_initial_table [ip_tables]
c008000003890468 T ipt_do_table [ip_tables]
c008000003890de8 T ipt_unregister_table_pre_exit [ip_tables]
...
Perf calls function symbols__fixup_end() which sets the end of symbol to
0xc008000003890000, which is the next address and this is the start
address of first module (icmp_checkentry in above) which will make the
huge symbol size of 0x80000010f0000.
After symbols__fixup_end:
symbols__fixup_end: sym->name: _end
sym->start: 0xc0000000027a0000
sym->end: 0xc008000003890000
On powerpc, kernel text segment is located at 0xc000000000000000 whereas
the modules are located at very high memory addresses,
0xc00800000xxxxxxx. Since the gap between end of kernel text segment and
beginning of first module's address is high, histogram allocation using
calloc fails.
Fix this by detecting the kernel's last symbol and limiting the range of
last kernel symbol to pagesize.
Signed-off-by: Athira Rajeev<[email protected]>
Acked-by: Jiri Olsa <[email protected]>
Tested-By: Kajol Jain <[email protected]>
Cc: Madhavan Srinivasan <[email protected]>
Cc: Michael Ellerman <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
This patch fixes "perf inject --jit" to properly operate on
namespaced/containerized processes:
* jitdump files are generated by the process, thus they should be
looked up in its mount NS.
* DSOs of injected MMAP events will later be looked up in the process
mount NS, so write them into its NS.
* PIDs & TIDs from jitdump events need to be translated to the PID as
seen by "perf record" before written into MMAP events.
For a process in a different PID NS, the TID & PID given in the jitdump
event are actually ignored; I use the TID & PID of the thread which
mmap()ed the jitdump file. This is simplified and won't do for forks of
the initial process, if they continue using the same jitdump file.
Future patches might improve it.
This was tested by recording a NodeJS process running with
"--perf-prof", inside a Docker container, and by recording another
NodeJS process running in the same namespaces as perf itself, to make
sure it's not broken for non-containerized processes.
Signed-off-by: Yonatan Goldschmidt <[email protected]>
Acked-by: Jiri Olsa <[email protected]>
Acked-by: Namhyung Kim <[email protected]>
Cc: Alexander Shishkin <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: Mark Rutland <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Stephane Eranian <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
Provides an accurate mean to determine if the owner thread is in a
different PID namespace.
Signed-off-by: Yonatan Goldschmidt <[email protected]>
Acked-by: Jiri Olsa <[email protected]>
Acked-by: Namhyung Kim <[email protected]>
Cc: Alexander Shishkin <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: Mark Rutland <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Stephane Eranian <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
events
Like in __event__synthesize_thread(), I think it's better to use
scandir() instead of the readdir() loop. In case some malicious task
continues to create new threads, the readdir() loop will run over and
over to collect tids. The scandir() also has the problem but the window
is much smaller since it doesn't do much work during the iteration.
Also add filter_task() function as we only care the tasks.
Signed-off-by: Namhyung Kim <[email protected]>
Acked-by: Jiri Olsa <[email protected]>
Cc: Alexander Shishkin <[email protected]>
Cc: Andi Kleen <[email protected]>
Cc: Ian Rogers <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: Mark Rutland <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Stephane Eranian <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
To synthesize information to resolve sample IPs, it needs to scan task
and mmap info from the /proc filesystem. For each process, it opens
(and reads) status and maps file respectively. But as kernel threads
don't have memory maps so we can skip the maps file.
To find kernel threads, check "VmPeak:" line in /proc/<PID>/status file.
It's about the peak virtual memory usage so only user-level tasks have
that. Note that it's possible to miss the line due to partial reads.
So we should double-check if it's a really kernel thread when there's no
VmPeak line.
Thus check "Threads:" line (which follows the VmPeak line whether or not
it exists) to be sure it's read enough data - just in case of deeply
nested pid namespaces or large number of supplementary groups are
involved.
This is for user process:
$ head -40 /proc/1/status
Name: systemd
Umask: 0000
State: S (sleeping)
Tgid: 1
Ngid: 0
Pid: 1
PPid: 0
TracerPid: 0
Uid: 0 0 0 0
Gid: 0 0 0 0
FDSize: 256
Groups:
NStgid: 1
NSpid: 1
NSpgid: 1
NSsid: 1
VmPeak: 234192 kB <-- here
VmSize: 169964 kB
VmLck: 0 kB
VmPin: 0 kB
VmHWM: 29528 kB
VmRSS: 6104 kB
RssAnon: 2756 kB
RssFile: 3348 kB
RssShmem: 0 kB
VmData: 19776 kB
VmStk: 1036 kB
VmExe: 784 kB
VmLib: 9532 kB
VmPTE: 116 kB
VmSwap: 2400 kB
HugetlbPages: 0 kB
CoreDumping: 0
THP_enabled: 1
Threads: 1 <-- and here
SigQ: 1/62808
SigPnd: 0000000000000000
ShdPnd: 0000000000000000
SigBlk: 7be3c0fe28014a03
SigIgn: 0000000000001000
And this is for kernel thread:
$ head -20 /proc/2/status
Name: kthreadd
Umask: 0000
State: S (sleeping)
Tgid: 2
Ngid: 0
Pid: 2
PPid: 0
TracerPid: 0
Uid: 0 0 0 0
Gid: 0 0 0 0
FDSize: 64
Groups:
NStgid: 2
NSpid: 2
NSpgid: 0
NSsid: 0
Threads: 1 <-- here
SigQ: 1/62808
SigPnd: 0000000000000000
ShdPnd: 0000000000000000
Signed-off-by: Namhyung Kim <[email protected]>
Acked-by: Jiri Olsa <[email protected]>
Cc: Alexander Shishkin <[email protected]>
Cc: Andi Kleen <[email protected]>
Cc: Ian Rogers <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: Mark Rutland <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Stephane Eranian <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
To save memory usage, it needs to reduce the number of entries in the
proc filesystem. It's using /proc/<PID>/task directory to traverse
threads in the process and then kernel creates /proc/<PID>/task/<TID>
entries.
After that it checks the thread info using the /proc/<TID>/status file
rather than /proc/<PID>/task/<TID>/status. As far as I can see, they
are the same and contain all the info we need.
Using the latter eliminates the unnecessary /proc/<TID> entry. This can
be useful especially a large number of threads are used in the system.
In my experiment around 1KB of memory on average was saved for each
thread (which is not a thread group leader).
To do this, pass both pid and tid to perf_event_prepare_comm() if it
knows them. In case it doesn't know, passing 0 as pid will do the old
way.
Signed-off-by: Namhyung Kim <[email protected]>
Acked-by: Jiri Olsa <[email protected]>
Cc: Alexander Shishkin <[email protected]>
Cc: Andi Kleen <[email protected]>
Cc: Ian Rogers <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: Mark Rutland <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Stephane Eranian <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
Reduce duplication in the JSONs by referencing standard events from
armv8-common-and-microarch.json
In general the "PublicDescription" fields are not modified when somewhat
significantly worded differently than the standard.
Apart from that, description and names for events slightly different to
standard are changed (to standard) for consistency.
Signed-off-by: John Garry <[email protected]>
Acked-by: Will Deacon <[email protected]>
Cc: James Clark <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Leo Yan <[email protected]>
Cc: Mark Rutland <[email protected]>
Cc: Mathieu Poirier <[email protected]>
Cc: Nakamura, Shunsuke/中村 俊介 <[email protected]>
Cc: [email protected]
Cc: [email protected]
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
Reduce duplication in the JSONs by referencing standard events from
armv8-common-and-microarch.json
In general the "PublicDescription" fields are not modified when somewhat
significantly worded differently than the standard.
Apart from that, description and names for events slightly different to
standard are changed (to standard) for consistency.
Note that names for events 0x34 and 0x35 are non-standard and remain
unchanged. Those events came from the following originally:
https://github.com/AmpereComputing/ampere-centos-kernel/blob/4c2479c67bbcf35b35224db12a092b33682b181c/Documentation/arm64/eMAG-ARM-CoreImpDefined.pdf
Signed-off-by: John Garry <[email protected]>
Acked-by: Will Deacon <[email protected]>
Cc: James Clark <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Leo Yan <[email protected]>
Cc: Mark Rutland <[email protected]>
Cc: Nakamura, Shunsuke/中村 俊介 <[email protected]>
Cc: [email protected]
Cc: [email protected]
Cc: [email protected]
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
Add a common and microarch JSON, which can be referenced from CPU JSONs.
For now, brief and public description are as event brief event
description from the ARMv8 ARM [0], D7-11.
The list of events is not complete, as not all events will be referenced
yet.
Reference document is at the following:
[0] https://documentation-service.arm.com/static/5fa3bd1eb209f547eebd4141?token=
Signed-off-by: John Garry <[email protected]>
Acked-by: Will Deacon <[email protected]>
Cc: James Clark <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Leo Yan <[email protected]>
Cc: Mark Rutland <[email protected]>
Cc: Mathieu Poirier <[email protected]>
Cc: Nakamura, Shunsuke/中村 俊介 <[email protected]>
Cc: [email protected]
Cc: [email protected]
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
The "briefdescription" for event 0x35 has a typo - fix it.
Fixes: d35c595bf005 ("perf vendor events arm64: Revise core JSON events for eMAG")
Signed-off-by: John Garry <[email protected]>
Acked-by: Will Deacon <[email protected]>
Cc: James Clark <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Leo Yan <[email protected]>
Cc: Mark Rutland <[email protected]>
Cc: Mathieu Poirier <[email protected]>
Cc: Nakamura, Shunsuke/中村 俊介 <[email protected]>
Cc: [email protected]
Cc: [email protected]
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
Other perf tool builtins already supported a DSO filter.
For example:
$ perf report --dsos a,b,c
which only considers symbols in these dsos.
Now the DSO filter is supported in 'perf script':
root@kbl-ppc:~# ./perf script --dsos "[kernel.kallsyms]"
perf 18123 [000] 6142863.075104: 1 cycles: ffffffff9ca77308 native_write_msr+0x8 ([kernel.kallsyms])
perf 18123 [000] 6142863.075107: 1 cycles: ffffffff9ca77308 native_write_msr+0x8 ([kernel.kallsyms])
perf 18123 [000] 6142863.075108: 10 cycles: ffffffff9ca77308 native_write_msr+0x8 ([kernel.kallsyms])
perf 18123 [000] 6142863.075109: 273 cycles: ffffffff9ca7730a native_write_msr+0xa ([kernel.kallsyms])
perf 18123 [000] 6142863.075110: 7684 cycles: ffffffff9ca3c9c0 native_sched_clock+0x50 ([kernel.kallsyms])
perf 18123 [000] 6142863.075112: 213017 cycles: ffffffff9d765a92 syscall_exit_to_user_mode+0x32 ([kernel.kallsyms])
perf 18123 [001] 6142863.075156: 1 cycles: ffffffff9ca77308 native_write_msr+0x8 ([kernel.kallsyms])
perf 18123 [001] 6142863.075158: 1 cycles: ffffffff9ca77308 native_write_msr+0x8 ([kernel.kallsyms])
perf 18123 [001] 6142863.075159: 17 cycles: ffffffff9ca77308 native_write_msr+0x8 ([kernel.kallsyms])
Committer testing:
$ perf script
ls 2364888 29303.010949: 1 cycles:u: ffffffffa4bbc6a9 [unknown] ([unknown])
ls 2364888 29303.010957: 1 cycles:u: ffffffffa429ef48 [unknown] ([unknown])
ls 2364888 29303.010961: 1 cycles:u: ffffffffa4260133 [unknown] ([unknown])
ls 2364888 29303.010964: 5 cycles:u: ffffffffa429efad [unknown] ([unknown])
ls 2364888 29303.010967: 41 cycles:u: ffffffffa42a4586 [unknown] ([unknown])
ls 2364888 29303.010972: 435 cycles:u: ffffffffa429efe0 [unknown] ([unknown])
ls 2364888 29303.010978: 5142 cycles:u: 7f9b95bc2abf __GI___tunables_init+0x11f (/usr/lib64/ld-2.32.so)
ls 2364888 29303.011006: 38551 cycles:u: ffffffffa4290f61 [unknown] ([unknown])
ls 2364888 29303.011486: 238234 cycles:u: 7f9b95bb7741 _dl_relocate_object+0xa71 (/usr/lib64/ld-2.32.so)
ls 2364888 29303.011937: 415870 cycles:u: 7f9b95a1c80e __strcoll_l+0xe (/usr/lib64/libc-2.32.so)
$
Before:
$ perf script --dsos /usr/lib64/libc-2.32.so |& head -5
Error: unknown option `dsos'
Usage: perf script [<options>]
or: perf script [<options>] record <script> [<record-options>] <command>
or: perf script [<options>] report <script> [script-args]
$
After:
$ perf script --dsos /usr/lib64/libc-2.32.so
ls 2364888 29303.011937: 415870 cycles:u: 7f9b95a1c80e __strcoll_l+0xe (/usr/lib64/libc-2.32.so)
$
Signed-off-by: Jin Yao <[email protected]>
Acked-by: Jiri Olsa <[email protected]>
Tested-by: Arnaldo Carvalho de Melo <[email protected]>
Cc: Alexander Shishkin <[email protected]>
Cc: Andi Kleen <[email protected]>
Cc: Jin Yao <[email protected]>
Cc: Kan Liang <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Link: http://lore.kernel.org/lkml/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
When we lookup an address and don't find a map we should filter that
sample if the user specified a list of --dso entries to filter on, fix
it.
Before:
$ perf script
sleep 274800 2843.556162: 1 cycles:u: ffffffffbb26bff4 [unknown] ([unknown])
sleep 274800 2843.556168: 1 cycles:u: ffffffffbb2b047d [unknown] ([unknown])
sleep 274800 2843.556171: 1 cycles:u: ffffffffbb2706b2 [unknown] ([unknown])
sleep 274800 2843.556174: 6 cycles:u: ffffffffbb2b0267 [unknown] ([unknown])
sleep 274800 2843.556176: 59 cycles:u: ffffffffbb2b03b1 [unknown] ([unknown])
sleep 274800 2843.556180: 691 cycles:u: ffffffffbb26bff4 [unknown] ([unknown])
sleep 274800 2843.556189: 9160 cycles:u: 7fa9550eeaa3 __GI___tunables_init+0xf3 (/usr/lib64/ld-2.32.so)
sleep 274800 2843.556312: 86937 cycles:u: 7fa9550e157b _dl_lookup_symbol_x+0x4b (/usr/lib64/ld-2.32.so)
$
So we have some samples we somehow didn't find in a map for, if we now
do:
$ perf report --stdio --dso /usr/lib64/ld-2.32.so
# dso: /usr/lib64/ld-2.32.so
#
# Total Lost Samples: 0
#
# Samples: 8 of event 'cycles:u'
# Event count (approx.): 96856
#
# Overhead Command Symbol
# ........ ....... ........................
#
89.76% sleep [.] _dl_lookup_symbol_x
9.46% sleep [.] __GI___tunables_init
0.71% sleep [k] 0xffffffffbb26bff4
0.06% sleep [k] 0xffffffffbb2b03b1
0.01% sleep [k] 0xffffffffbb2b0267
0.00% sleep [k] 0xffffffffbb2706b2
0.00% sleep [k] 0xffffffffbb2b047d
$
After this patch we get the right output with just entries for the DSOs
specified in --dso:
$ perf report --stdio --dso /usr/lib64/ld-2.32.so
# dso: /usr/lib64/ld-2.32.so
#
# Total Lost Samples: 0
#
# Samples: 8 of event 'cycles:u'
# Event count (approx.): 96856
#
# Overhead Command Symbol
# ........ ....... ........................
#
89.76% sleep [.] _dl_lookup_symbol_x
9.46% sleep [.] __GI___tunables_init
$
#
Fixes: 96415e4d3f5fdf9c ("perf symbols: Avoid unnecessary symbol loading when dso list is specified")
Cc: Alexander Shishkin <[email protected]>
Cc: Andi Kleen <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: Jin Yao <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Kan Liang <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Link: http://lore.kernel.org/lkml/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
The Topdown Microarchitecture Analysis (TMA) Method is a structured
analysis methodology to identify critical performance bottlenecks in
out-of-order processors. From the Ice Lake and later platforms, the
Topdown information can be retrieved from the dedicated "metrics"
register, which isn't impacted by other events. Also, the Topdown
metrics support both per thread/process and per core measuring. Adding
Topdown metrics events as default events can enrich the default
measuring information, and would not cost any extra multiplexing.
Introduce arch_evlist__add_default_attrs() to allow architecture
specific default events. Add the Topdown metrics events in the X86
specific arch_evlist__add_default_attrs(). Other architectures can add
their own default events later separately.
With the patch:
$ perf stat sleep 1
Performance counter stats for 'sleep 1':
0.82 msec task-clock:u # 0.001 CPUs utilized
0 context-switches:u # 0.000 K/sec
0 cpu-migrations:u # 0.000 K/sec
61 page-faults:u # 0.074 M/sec
319,941 cycles:u # 0.388 GHz
242,802 instructions:u # 0.76 insn per cycle
54,380 branches:u # 66.028 M/sec
4,043 branch-misses:u # 7.43% of all branches
1,585,555 slots:u # 1925.189 M/sec
238,941 topdown-retiring:u # 15.0% retiring
410,378 topdown-bad-spec:u # 25.8% bad speculation
634,222 topdown-fe-bound:u # 39.9% frontend bound
304,675 topdown-be-bound:u # 19.2% backend bound
1.001791625 seconds time elapsed
0.000000000 seconds user
0.001572000 seconds sys
Signed-off-by: Kan Liang <[email protected]>
Tested-by: Arnaldo Carvalho de Melo <[email protected]>
Cc: Andi Kleen <[email protected]>
Cc: Jin Yao <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Namhyung Kim <[email protected]>
Link: http://lore.kernel.org/lkml/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
Event duration_time in a metric expression requires special handling.
Improve test coverage by including a metric whose expression includes
duration_time. The actual metric is a copied from the L1D_Cache_Fill_BW
metric on my broadwell machine.
Signed-off-by: John Garry <[email protected]>
Acked-by: Ian Rogers <[email protected]>
Acked-by: Namhyung Kim <[email protected]>
Cc: Alexander Shishkin <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Kajol Jain <[email protected]>
Cc: Mark Rutland <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: [email protected]
Link: http://lore.kernel.org/lkml/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
Commit
6d6501d912a9 ("tools/power/turbostat: Read energy_perf_bias from sysfs")
converted turbostat to read the energy_perf_bias value from sysfs.
However, older kernels which do not have that file yet, would fail. For
those, fall back to the MSR reading.
Fixes: 6d6501d912a9 ("tools/power/turbostat: Read energy_perf_bias from sysfs")
Reported-by: Artem Bityutskiy <[email protected]>
Signed-off-by: Borislav Petkov <[email protected]>
Tested-by: Artem Bityutskiy <[email protected]>
Link: https://lkml.kernel.org/r/[email protected]
|
|
Some compilers trigger a warning when tmp_dir_path is allocated
with a fixed size of 64-bytes and used in the following snprintf:
snprintf(tmp_exec_path, sizeof(tmp_exec_path), "%s/copy_of_rm",
tmp_dir_path);
warning: ‘/copy_of_rm’ directive output may be truncated writing 11
bytes into a region of size between 1 and 64 [-Wformat-truncation=]
This is because it assumes that tmp_dir_path can be a maximum of 64
bytes long and, therefore, the end-result can get truncated. Fix it by
not using a fixed size in the initialization of tmp_dir_path which
allows the compiler to track actual size of the array better.
Fixes: 2f94ac191846 ("bpf: Update local storage test to check handling of null ptrs")
Signed-off-by: KP Singh <[email protected]>
Signed-off-by: Andrii Nakryiko <[email protected]>
Link: https://lore.kernel.org/bpf/[email protected]
|
|
This patch adds testcases for ADD_ADDR with port and the related MIB
counters check in chk_add_nr. The output looks like this:
24 signal address with port syn[ ok ] - synack[ ok ] - ack[ ok ]
add[ ok ] - echo [ ok ] - pt [ ok ]
syn[ ok ] - synack[ ok ] - ack[ ok ]
syn[ ok ] - ack [ ok ]
25 subflow and signal with port syn[ ok ] - synack[ ok ] - ack[ ok ]
add[ ok ] - echo [ ok ] - pt [ ok ]
syn[ ok ] - synack[ ok ] - ack[ ok ]
syn[ ok ] - ack [ ok ]
26 remove single address with port syn[ ok ] - synack[ ok ] - ack[ ok ]
add[ ok ] - echo [ ok ] - pt [ ok ]
syn[ ok ] - synack[ ok ] - ack[ ok ]
syn[ ok ] - ack [ ok ]
rm [ ok ] - sf [ ok ]
Signed-off-by: Geliang Tang <[email protected]>
Signed-off-by: Mat Martineau <[email protected]>
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
This patch adds a new argument for pm_nl_ctl tool. We can use it like
this:
# pm_nl_ctl add 10.0.2.1 flags signal port 10100
# pm_nl_ctl dump
id 1 flags signal 10.0.2.1 10100
Signed-off-by: Geliang Tang <[email protected]>
Signed-off-by: Mat Martineau <[email protected]>
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
This patch adds testcases to create subflows or signal addresses for the
newly added IPv4 or IPv6 addresses.
Signed-off-by: Geliang Tang <[email protected]>
Signed-off-by: Mat Martineau <[email protected]>
Signed-off-by: Jakub Kicinski <[email protected]>
|