| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
This patch removes the libcap usage from test_progs.
bind_perm.c is the only user. cap_*_effective() helpers added in the
earlier patch are directly used instead.
No other selftest binary is using libcap, so '-lcap' is also removed
from the Makefile.
Signed-off-by: Martin KaFai Lau <[email protected]>
Signed-off-by: Alexei Starovoitov <[email protected]>
Reviewed-by: Stanislav Fomichev <[email protected]>
Acked-by: John Fastabend <[email protected]>
Link: https://lore.kernel.org/bpf/[email protected]
|
|
This patch removes the libcap usage from test_verifier.
The cap_*_effective() helpers added in the earlier patch are
used instead.
Signed-off-by: Martin KaFai Lau <[email protected]>
Signed-off-by: Alexei Starovoitov <[email protected]>
Acked-by: John Fastabend <[email protected]>
Link: https://lore.kernel.org/bpf/[email protected]
|
|
After upgrading to the newer libcap (>= 2.60),
the libcap commit aca076443591 ("Make cap_t operations thread safe.")
added a "__u8 mutex;" to the "struct _cap_struct". It caused a few byte
shift that breaks the assumption made in the "struct libcap" definition
in test_verifier.c.
The bpf selftest usage only needs to enable and disable the effective
caps of the running task. It is easier to directly syscall the
capget and capset instead. It can also remove the libcap
library dependency.
The cap_helpers.{c,h} is added. One __u64 is used for all CAP_*
bits instead of two __u32.
Signed-off-by: Martin KaFai Lau <[email protected]>
Signed-off-by: Alexei Starovoitov <[email protected]>
Acked-by: John Fastabend <[email protected]>
Link: https://lore.kernel.org/bpf/[email protected]
|
|
The fundamental premise of VRF and l3mdev core code is binding a socket
to a device (l3mdev or netdev with an L3 domain) to indicate L3 scope.
Legacy code resets flowi_oif to the l3mdev losing any original port
device binding. Ben (among others) has demonstrated use cases where the
original port device binding is important and needs to be retained.
This patch handles that by adding a new entry to the common flow struct
that can indicate the l3mdev index for later rule and table matching
avoiding the need to reset flowi_oif.
In addition to allowing more use cases that require port device binds,
this patch brings a few datapath simplications:
1. l3mdev_fib_rule_match is only called when walking fib rules and
always after l3mdev_update_flow. That allows an optimization to bail
early for non-VRF type uses cases when flowi_l3mdev is not set. Also,
only that index needs to be checked for the FIB table id.
2. l3mdev_update_flow can be called with flowi_oif set to a l3mdev
(e.g., VRF) device. By resetting flowi_oif only for this case the
FLOWI_FLAG_SKIP_NH_OIF flag is not longer needed and can be removed,
removing several checks in the datapath. The flowi_iif path can be
simplified to only be called if the it is not loopback (loopback can
not be assigned to an L3 domain) and the l3mdev index is not already
set.
3. Avoid another device lookup in the output path when the fib lookup
returns a reject failure.
Note: 2 functional tests for local traffic with reject fib rules are
updated to reflect the new direct failure at FIB lookup time for ping
rather than the failure on packet path. The current code fails like this:
HINT: Fails since address on vrf device is out of device scope
COMMAND: ip netns exec ns-A ping -c1 -w1 -I eth1 172.16.3.1
ping: Warning: source address might be selected on device other than: eth1
PING 172.16.3.1 (172.16.3.1) from 172.16.3.1 eth1: 56(84) bytes of data.
--- 172.16.3.1 ping statistics ---
1 packets transmitted, 0 received, 100% packet loss, time 0ms
where the test now directly fails:
HINT: Fails since address on vrf device is out of device scope
COMMAND: ip netns exec ns-A ping -c1 -w1 -I eth1 172.16.3.1
ping: connect: No route to host
Signed-off-by: David Ahern <[email protected]>
Tested-by: Ben Greear <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
The top-level (bpftool.8) man page was missing docs for a few
subcommands and their respective sub-sub-commands.
This commit brings the top level man page up to date. Note that I've
kept the ordering of the subcommands the same as in `bpftool help`.
Signed-off-by: Daniel Xu <[email protected]>
Signed-off-by: Andrii Nakryiko <[email protected]>
Link: https://lore.kernel.org/bpf/3049ef5dc509c0d1832f0a8b2dba2ccaad0af688.1647213551.git.dxu@dxuuu.xyz
|
|
Commit 82e6b1eee6a8 ("bpf: Allow to specify user-provided bpf_cookie for
BPF perf links") introduced the concept of user specified bpf_cookie,
which could be accessed by BPF programs using bpf_get_attach_cookie().
For troubleshooting purposes it is convenient to expose bpf_cookie via
bpftool as well, so there is no need to meddle with the target BPF
program itself.
Implemented using the pid iterator BPF program to actually fetch
bpf_cookies, which allows constraining code changes only to bpftool.
$ bpftool link
1: type 7 prog 5
bpf_cookie 123
pids bootstrap(81)
Signed-off-by: Dmitrii Dolgov <[email protected]>
Signed-off-by: Andrii Nakryiko <[email protected]>
Acked-by: Yonghong Song <[email protected]>
Acked-by: Quentin Monnet <[email protected]>
Link: https://lore.kernel.org/bpf/[email protected]
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/kvms390/linux into HEAD
KVM: s390: Fix, test and feature for 5.18 part 2
- memop selftest
- fix SCK locking
- adapter interruptions virtualization for secure guests
|
|
I probably started using "do {} while();", but changed all but osnoise_top
to "while(){};" leaving the ; behind.
Cleanup the main loop code, making all tools use "while() {}"
Changcheng Deng reported this problem, as reported by coccicheck:
Fix the following coccicheck review:
./tools/tracing/rtla/src/timerlat_hist.c: 800: 2-3: Unneeded semicolon
./tools/tracing/rtla/src/osnoise_hist.c: 776: 2-3: Unneeded semicolon
./tools/tracing/rtla/src/timerlat_top.c: 596: 2-3: Unneeded semicolon
Link: https://lkml.kernel.org/r/3c1642110aa87c396f5da4a037dabc72dbb9c601.1646247211.git.bristot@kernel.org
Cc: Daniel Bristot de Oliveira <[email protected]>
Cc: Clark Williams <[email protected]>
Cc: Juri Lelli <[email protected]>
Cc: Jonathan Corbet <[email protected]>
Reported-by: Changcheng Deng <[email protected]>
Reported-by: Zeal Robot <[email protected]>
Signed-off-by: Daniel Bristot de Oliveira <[email protected]>
Signed-off-by: Steven Rostedt (Google) <[email protected]>
|
|
Add the --dma-latency to set /dev/cpu_dma_latency to the
specified value, this aims to avoid having exit from idle
states latencies that could be influencing the analysis.
Link: https://lkml.kernel.org/r/72ddb0d913459f13217086dadafad88a7c46dd28.1646247211.git.bristot@kernel.org
Cc: Daniel Bristot de Oliveira <[email protected]>
Cc: Clark Williams <[email protected]>
Cc: Juri Lelli <[email protected]>
Cc: Jonathan Corbet <[email protected]>
Signed-off-by: Daniel Bristot de Oliveira <[email protected]>
Signed-off-by: Steven Rostedt (Google) <[email protected]>
|
|
rtla osnoise hist is printing the following message when hitting stop
tracing:
printf("rtla timelat hit stop tracing\n");
which is obviosly wrong.
s/timerlat/osnoise/ fixing the printf.
Link: https://lkml.kernel.org/r/2b8f090556fe37b81d183b74ce271421f131c77b.1646247211.git.bristot@kernel.org
Fixes: 829a6c0b5698 ("rtla/osnoise: Add the hist mode")
Cc: Daniel Bristot de Oliveira <[email protected]>
Cc: Clark Williams <[email protected]>
Cc: Juri Lelli <[email protected]>
Cc: Jonathan Corbet <[email protected]>
Signed-off-by: Daniel Bristot de Oliveira <[email protected]>
Signed-off-by: Steven Rostedt (Google) <[email protected]>
|
|
With the addition of --trigger option, it is also possible to stop
the trace from the -t tracing instance using the traceoff trigger.
Make rtla tools to check if the trace is stopped also in the trace
instance, stopping the execution of the tool.
Link: https://lkml.kernel.org/r/59fc7c6f23dddd5c8b7ef1782cf3da51ea2ce0f5.1646247211.git.bristot@kernel.org
Cc: Daniel Bristot de Oliveira <[email protected]>
Cc: Clark Williams <[email protected]>
Cc: Juri Lelli <[email protected]>
Cc: Jonathan Corbet <[email protected]>
Signed-off-by: Daniel Bristot de Oliveira <[email protected]>
Signed-off-by: Steven Rostedt (Google) <[email protected]>
|
|
The hist: trigger generates a histogram in the file sys/event/hist.
If the hist: trigger is used, automatically save the histogram output of
the event sys:event in the sys_event_hist.txt file.
Link: https://lkml.kernel.org/r/b5c906af31d4e022ffe87fb0848fac5c089087c8.1646247211.git.bristot@kernel.org
Cc: Daniel Bristot de Oliveira <[email protected]>
Cc: Clark Williams <[email protected]>
Cc: Juri Lelli <[email protected]>
Cc: Jonathan Corbet <[email protected]>
Signed-off-by: Daniel Bristot de Oliveira <[email protected]>
Signed-off-by: Steven Rostedt (Google) <[email protected]>
|
|
Add --filter option. This option enables a trace event filtering of the
previous -e sys:event argument.
This option is available for all current tools.
Link: https://lkml.kernel.org/r/509d70b6348d3e5bcbf1f07ab725ce08d063149a.1646247211.git.bristot@kernel.org
Cc: Daniel Bristot de Oliveira <[email protected]>
Cc: Clark Williams <[email protected]>
Cc: Juri Lelli <[email protected]>
Cc: Jonathan Corbet <[email protected]>
Signed-off-by: Daniel Bristot de Oliveira <[email protected]>
Signed-off-by: Steven Rostedt (Google) <[email protected]>
|
|
Add a set of helper functions to allow rtla tools to filter events
in the trace instance.
Link: https://lkml.kernel.org/r/12623b1684684549d53b90f4bf66fae44584fd14.1646247211.git.bristot@kernel.org
Cc: Daniel Bristot de Oliveira <[email protected]>
Cc: Clark Williams <[email protected]>
Cc: Juri Lelli <[email protected]>
Cc: Jonathan Corbet <[email protected]>
Signed-off-by: Daniel Bristot de Oliveira <[email protected]>
Signed-off-by: Steven Rostedt (Google) <[email protected]>
|
|
Add --trigger option. This option enables a trace event trigger to the
previous -e sys:event argument, allowing some advanced tracing options.
For instance, in a system with CPUs 2:23 isolated, it is possible to get
a stack trace of thread wakeup targeting those CPUs while running
osnoise with the following command line:
# osnoise top -c 2-23 -a 50 -e sched:sched_wakeup --trigger="stacktrace if target_cpu >= 2"
This option is available for all current tools.
Link: https://lkml.kernel.org/r/07d2983d5f71261d4da89dbaf02efcad100ab8ee.1646247211.git.bristot@kernel.org
Cc: Daniel Bristot de Oliveira <[email protected]>
Cc: Clark Williams <[email protected]>
Cc: Juri Lelli <[email protected]>
Cc: Jonathan Corbet <[email protected]>
Signed-off-by: Daniel Bristot de Oliveira <[email protected]>
Signed-off-by: Steven Rostedt (Google) <[email protected]>
|
|
Add a set of helper functions to allow rtla tools to trigger event
actions in the trace instance.
Link: https://lkml.kernel.org/r/e0d31abe879a78a5600b64f904d0dfa8f76e4fbb.1646247211.git.bristot@kernel.org
Cc: Daniel Bristot de Oliveira <[email protected]>
Cc: Clark Williams <[email protected]>
Cc: Juri Lelli <[email protected]>
Cc: Jonathan Corbet <[email protected]>
Signed-off-by: Daniel Bristot de Oliveira <[email protected]>
Signed-off-by: Steven Rostedt (Google) <[email protected]>
|
|
Add -e/--event option. This option enables an event in the trace (-t)
session. The argument can be a specific event, e.g., -e sched:sched_switch,
or all events of a system group, e.g., -e sched. Multiple -e are allowed.
It is only active when -t or -a are set.
This option is available for all current tools.
Link: https://lkml.kernel.org/r/6a3b753be9b1e811953995f7f21a86918ad13390.1646247211.git.bristot@kernel.org
Cc: Daniel Bristot de Oliveira <[email protected]>
Cc: Clark Williams <[email protected]>
Cc: Juri Lelli <[email protected]>
Cc: Jonathan Corbet <[email protected]>
Signed-off-by: Daniel Bristot de Oliveira <[email protected]>
Signed-off-by: Steven Rostedt (Google) <[email protected]>
|
|
Add a set of helper functions to allow the rtla tools to enable
additional tracepoints in the trace instance.
Link: https://lkml.kernel.org/r/932398b36c1bbaa22c7810d7a40ca9b8c5595b94.1646247211.git.bristot@kernel.org
Cc: Daniel Bristot de Oliveira <[email protected]>
Cc: Clark Williams <[email protected]>
Cc: Juri Lelli <[email protected]>
Cc: Jonathan Corbet <[email protected]>
Signed-off-by: Daniel Bristot de Oliveira <[email protected]>
Signed-off-by: Steven Rostedt (Google) <[email protected]>
|
|
Add the -a/--auto <arg in us> option. This option sets some commonly
used options while debugging the system. It aims to help users produce
reports in the field, reducing the number of arguments passed to the
tool in the first approach to a problem.
It is equivalent to setting osnoise/stop_tracing_total_us and print_stack
with the argument, and saving the trace to timerlat_trace.txt file if the
trace is stopped automatically.
Link: https://lkml.kernel.org/r/92438f7ef132c731f538cebdf77850300afe04a5.1646247211.git.bristot@kernel.org
Cc: Daniel Bristot de Oliveira <[email protected]>
Cc: Clark Williams <[email protected]>
Cc: Juri Lelli <[email protected]>
Cc: Jonathan Corbet <[email protected]>
Signed-off-by: Daniel Bristot de Oliveira <[email protected]>
Signed-off-by: Steven Rostedt (Google) <[email protected]>
|
|
Add the -a/--auto <arg in us> option. This option sets some commonly
used options while debugging the system. It aims to help users produce
reports in the field, reducing the number of arguments passed to the
tool in the first approach to a problem.
It is equivalent to setting osnoise/stop_tracing_us with the argument,
setting tracing_thresh to 1 us, and saving the trace to osnoise_trace.txt
file if the trace is stopped automatically.
Link: https://lkml.kernel.org/r/ef04c961b227eb93a83cd0b54bfca45e1a381b77.1646247211.git.bristot@kernel.org
Cc: Daniel Bristot de Oliveira <[email protected]>
Cc: Clark Williams <[email protected]>
Cc: Juri Lelli <[email protected]>
Cc: Jonathan Corbet <[email protected]>
Signed-off-by: Daniel Bristot de Oliveira <[email protected]>
Signed-off-by: Steven Rostedt (Google) <[email protected]>
|
|
Add the -T/--threshold option to set the minimum threshold to be
considered a noise to osnoise top and hist commands. Also update
the man pages.
Link: https://lkml.kernel.org/r/031861200ffdb24a1df4aa72c458706889a20d5d.1646247211.git.bristot@kernel.org
Cc: Daniel Bristot de Oliveira <[email protected]>
Cc: Clark Williams <[email protected]>
Cc: Juri Lelli <[email protected]>
Cc: Jonathan Corbet <[email protected]>
Signed-off-by: Daniel Bristot de Oliveira <[email protected]>
Signed-off-by: Steven Rostedt (Google) <[email protected]>
|
|
osnoise uses the tracing_thresh parameter to define the delta between
two reads of the time to be considered a noise.
Add support to get and set the tracing_thresh from osnoise tools.
Link: https://lkml.kernel.org/r/715ad2a53fd40e41bab8c3f1214c1a94e12fb595.1646247211.git.bristot@kernel.org
Cc: Daniel Bristot de Oliveira <[email protected]>
Cc: Clark Williams <[email protected]>
Cc: Juri Lelli <[email protected]>
Cc: Jonathan Corbet <[email protected]>
Signed-off-by: Daniel Bristot de Oliveira <[email protected]>
Signed-off-by: Steven Rostedt (Google) <[email protected]>
|
|
Clean up the array_size.cocci warnings under tools/testing/selftests/bpf/:
Use `ARRAY_SIZE(arr)` instead of forms like `sizeof(arr)/sizeof(arr[0])`.
tools/testing/selftests/bpf/test_cgroup_storage.c uses ARRAY_SIZE() defined
in tools/include/linux/kernel.h (sys/sysinfo.h -> linux/kernel.h), while
others use ARRAY_SIZE() in bpf_util.h.
Signed-off-by: Guo Zhengkui <[email protected]>
Signed-off-by: Daniel Borkmann <[email protected]>
Link: https://lore.kernel.org/bpf/[email protected]
|
|
Add a test that verifies that UAPI notifications are emitted, as mlxsw
installs and deinstalls HW counters for the L3 offload xstats.
Signed-off-by: Petr Machata <[email protected]>
Signed-off-by: Paolo Abeni <[email protected]>
|
|
Add a test that verifies basic UAPI contracts, netdevsim operation,
rollbacks after partial enablement in core, and UAPI notifications.
Signed-off-by: Petr Machata <[email protected]>
Signed-off-by: Paolo Abeni <[email protected]>
|
|
Find all ENDBR instructions which are never referenced and stick them
in a section such that the kernel can poison them, sealing the
functions from ever being an indirect call target.
This removes about 1-in-4 ENDBR instructions.
Signed-off-by: Peter Zijlstra (Intel) <[email protected]>
Acked-by: Josh Poimboeuf <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
|
|
Intel IBT requires that every indirect JMP/CALL targets an ENDBR
instructions, failing this #CP happens and we die. Similarly, all
exception entries should be ENDBR.
Find all code relocations and ensure they're either an ENDBR
instruction or ANNOTATE_NOENDBR. For the exceptions look for
UNWIND_HINT_IRET_REGS at sym+0 not being ENDBR.
Signed-off-by: Peter Zijlstra (Intel) <[email protected]>
Acked-by: Josh Poimboeuf <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
|
|
Intel IBT requires the target of any indirect CALL or JMP instruction
to be the ENDBR instruction; optionally it allows those two
instructions to have a NOTRACK prefix in order to avoid this
requirement.
The kernel will not enable the use of NOTRACK, as such any occurence
of it in compiler generated code should be flagged.
Teach objtool to Decode ENDBR instructions and WARN about NOTRACK
prefixes.
Signed-off-by: Peter Zijlstra (Intel) <[email protected]>
Acked-by: Josh Poimboeuf <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
|
|
Read the new NOENDBR annotation. While there, attempt to not bloat
struct instruction.
Signed-off-by: Peter Zijlstra (Intel) <[email protected]>
Acked-by: Josh Poimboeuf <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
|
|
Because we need a variant for .S files too.
Signed-off-by: Peter Zijlstra (Intel) <[email protected]>
Link: https://lkml.kernel.org/r/[email protected]
|
|
Currently ASM_REACHABLE only works for UD2 instructions; reorder
things to also allow over-riding dead_end_function().
To that end:
- Mark INSN_BUG instructions in decode_instructions(), this saves
having to iterate all instructions yet again.
- Have add_call_destinations() set insn->dead_end for
dead_end_function() calls.
- Move add_dead_ends() *after* add_call_destinations() such that
ASM_REACHABLE can clear the ->dead_end mark.
- have validate_branch() only check ->dead_end.
Signed-off-by: Peter Zijlstra (Intel) <[email protected]>
Acked-by: Josh Poimboeuf <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
|
|
vmlinux.o: warning: objtool: ksys_unshare()+0x36c: unreachable instruction
0000 0000000000067040 <ksys_unshare>:
...
0364 673a4: 4c 89 ef mov %r13,%rdi
0367 673a7: e8 00 00 00 00 call 673ac <ksys_unshare+0x36c> 673a8: R_X86_64_PLT32 __invalid_creds-0x4
036c 673ac: e9 28 ff ff ff jmp 672d9 <ksys_unshare+0x299>
0371 673b1: 41 bc f4 ff ff ff mov $0xfffffff4,%r12d
0377 673b7: e9 80 fd ff ff jmp 6713c <ksys_unshare+0xfc>
Signed-off-by: Peter Zijlstra (Intel) <[email protected]>
Link: https://lkml.kernel.org/r/[email protected]
|
|
vmlinux.o: warning: objtool: get_signal()+0x108: unreachable instruction
0000 000000000007f930 <get_signal>:
...
0103 7fa33: e8 00 00 00 00 call 7fa38 <get_signal+0x108> 7fa34: R_X86_64_PLT32 do_group_exit-0x4
0108 7fa38: 41 8b 45 74 mov 0x74(%r13),%eax
Signed-off-by: Peter Zijlstra (Intel) <[email protected]>
Acked-by: Josh Poimboeuf <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
|
|
vmlinux.o: warning: objtool: smp_stop_nmi_callback()+0x2b: unreachable instruction
0000 0000000000047cf0 <smp_stop_nmi_callback>:
...
0026 47d16: e8 00 00 00 00 call 47d1b <smp_stop_nmi_callback+0x2b> 47d17: R_X86_64_PLT32 stop_this_cpu-0x4
002b 47d1b: b8 01 00 00 00 mov $0x1,%eax
Signed-off-by: Peter Zijlstra (Intel) <[email protected]>
Acked-by: Josh Poimboeuf <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
|
|
There's a fun implementation detail on linking STB_WEAK symbols. When
the linker combines two translation units, where one contains a weak
function and the other an override for it. It simply strips the
STB_WEAK symbol from the symbol table, but doesn't actually remove the
code.
The result is that when objtool is ran in a whole-archive kind of way,
it will encounter *heaps* of unused (and unreferenced) code. All
rudiments of weak functions.
Additionally, when a weak implementation is split into a .cold
subfunction that .cold symbol is left in place, even though completely
unused.
Teach objtool to ignore such rudiments by searching for symbol holes;
that is, code ranges that fall outside the given symbol bounds.
Specifically, ignore a sequence of unreachable instruction iff they
occupy a single hole, additionally ignore any .cold subfunctions
referenced.
Both ld.bfd and ld.lld behave like this. LTO builds otoh can (and do)
properly DCE weak functions.
Signed-off-by: Peter Zijlstra (Intel) <[email protected]>
Acked-by: Josh Poimboeuf <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
|
|
In order to prepare for LTO like objtool runs for modules, rename the
duplicate argument to lto.
Signed-off-by: Peter Zijlstra (Intel) <[email protected]>
Acked-by: Josh Poimboeuf <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
|
|
In order to have objtool warn about code references to !ENDBR
instruction, we need an annotation to allow this for non-control-flow
instances -- consider text range checks, text patching, or return
trampolines etc.
Signed-off-by: Peter Zijlstra (Intel) <[email protected]>
Reviewed-by: Kees Cook <[email protected]>
Acked-by: Josh Poimboeuf <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
|
|
Currently WARN_FUNC() either prints func+off and failing that prints
sec+off, add an intermediate sym+off. This is useful when playing
around with entry code.
Signed-off-by: Peter Zijlstra (Intel) <[email protected]>
Acked-by: Josh Poimboeuf <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
|
|
Ignore all INT3 instructions for unreachable code warnings, similar to NOP.
This allows using INT3 for various paddings instead of NOPs.
Signed-off-by: Peter Zijlstra (Intel) <[email protected]>
Acked-by: Josh Poimboeuf <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
|
|
Add a --dry-run argument to skip writing the modifications. This is
convenient for debugging.
Signed-off-by: Peter Zijlstra (Intel) <[email protected]>
Reviewed-by: Kees Cook <[email protected]>
Reviewed-by: Miroslav Benes <[email protected]>
Acked-by: Josh Poimboeuf <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
|
|
Enjoy the cleanups and avoid conflicts vs linkage
Signed-off-by: Peter Zijlstra <[email protected]>
|
|
The ENQCMD instruction implicitly accesses the PASID_MSR to fill in the
pasid field of the descriptor being submitted to an accelerator. But
there is no precise (and stable across kernel changes) point at which
the PASID_MSR is updated from the value for one task to the next.
Kernel code that uses accelerators must always use the ENQCMDS instruction
which does not access the PASID_MSR.
Check for use of the ENQCMD instruction in the kernel and warn on its
usage.
Signed-off-by: Fenghua Yu <[email protected]>
Signed-off-by: Borislav Petkov <[email protected]>
Reviewed-by: Tony Luck <[email protected]>
Acked-by: Josh Poimboeuf <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Peter Zijlstra <[email protected]>
|
|
Signed-off-by: Ingo Molnar <[email protected]>
|
|
Pablo Neira Ayuso says:
====================
Netfilter fixes for net
The following patchset contains Netfilter fixes for net coming late
in the 5.17-rc process:
1) Revert port remap to mitigate shadowing service ports, this is causing
problems in existing setups and this mitigation can be achieved with
explicit ruleset, eg.
... tcp sport < 16386 tcp dport >= 32768 masquerade random
This patches provided a built-in policy similar to the one described above.
2) Disable register tracking infrastructure in nf_tables. Florian reported
two issues:
- Existing expressions with no implemented .reduce interface
that causes data-store on register should cancel the tracking.
- Register clobbering might be possible storing data on registers that
are larger than 32-bits.
This might lead to generating incorrect ruleset bytecode. These two
issues are scheduled to be addressed in the next release cycle.
* git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf:
netfilter: nf_tables: disable register tracking
Revert "netfilter: conntrack: tag conntracks picked up in local out hook"
Revert "netfilter: nat: force port remap to prevent shadowing well-known ports"
====================
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
To pick up fixes that went thru perf/urgent.
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
* for-next/linkage:
arm64: module: remove (NOLOAD) from linker script
linkage: remove SYM_FUNC_{START,END}_ALIAS()
x86: clean up symbol aliasing
arm64: clean up symbol aliasing
linkage: add SYM_FUNC_ALIAS{,_LOCAL,_WEAK}()
|
|
Test that errors occur if key protection disallows access, including
tests for storage and fetch protection override. Perform tests for both
logical vcpu and absolute vm ioctls.
Also extend the existing tests to the vm ioctl.
Signed-off-by: Janis Schoetterl-Glausch <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Christian Borntraeger <[email protected]>
|
|
Do not just test the actual copy, but also that success is indicated
when using the check only flag.
Add copy test with storage key checking enabled, including tests for
storage and fetch protection override.
These test cover both logical vcpu ioctls as well as absolute vm ioctls.
Signed-off-by: Janis Schoetterl-Glausch <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Christian Borntraeger <[email protected]>
|
|
The stages synchronize guest and host execution.
This helps the reader and constraits the execution of the test -- if the
observed staging differs from the expected the test fails.
Signed-off-by: Janis Schoetterl-Glausch <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Christian Borntraeger <[email protected]>
|
|
In order to achieve good test coverage we need to be able to invoke the
MEM_OP ioctl with all possible parametrizations.
However, for a given test, we want to be concise and not specify a long
list of default values for parameters not relevant for the test, so the
readers attention is not needlessly diverted.
Add a macro that enables this and convert the existing test to use it.
The macro emulates named arguments and hides some of the ioctl's
redundancy, e.g. sets the key flag if an access key is specified.
Signed-off-by: Janis Schoetterl-Glausch <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Christian Borntraeger <[email protected]>
|