| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Profiling programs with bpftool was extended some time ago to support
two new metrics, namely itlb_misses and dtlb_misses (misses for the
instruction/data translation lookaside buffer). Update the manual page
and bash completion accordingly.
Fixes: 450d060e8f75 ("bpftool: Add {i,d}tlb_misses support for bpftool profile")
Signed-off-by: Quentin Monnet <[email protected]>
Signed-off-by: Andrii Nakryiko <[email protected]>
Link: https://lore.kernel.org/bpf/[email protected]
|
|
The -L|--use-loader option for using loader programs when loading, or
when generating a skeleton, did not have any documentation or bash
completion. Same thing goes for -B|--base-btf, used to pass a path to a
base BTF object for split BTF such as BTF for kernel modules.
This patch documents and adds bash completion for those options.
Fixes: 75fa1777694c ("tools/bpftool: Add bpftool support for split BTF")
Fixes: d510296d331a ("bpftool: Use syscall/loader program in "prog load" and "gen skeleton" command.")
Signed-off-by: Quentin Monnet <[email protected]>
Signed-off-by: Andrii Nakryiko <[email protected]>
Link: https://lore.kernel.org/bpf/[email protected]
|
|
Update the script responsible for checking that the different types used
at various places in bpftool are synchronised, and extend it to check
the consistency of options between the help messages in the source code
and the manual pages.
Signed-off-by: Quentin Monnet <[email protected]>
Signed-off-by: Andrii Nakryiko <[email protected]>
Link: https://lore.kernel.org/bpf/[email protected]
|
|
All bpftool commands support the options for JSON output and debug from
libbpf. In addition, some commands support additional options
corresponding to specific use cases.
The list of options described in the man pages for the different
commands are not always accurate. The messages for interactive help are
mostly limited to HELP_SPEC_OPTIONS, and are even less representative of
the actual set of options supported for the commands.
Let's update the lists:
- HELP_SPEC_OPTIONS is modified to contain the "default" options (JSON
and debug), and to be extensible (no ending curly bracket).
- All commands use HELP_SPEC_OPTIONS in their help message, and then
complete the list with their specific options.
- The lists of options in the man pages are updated.
- The formatting of the list for bpftool.rst is adjusted to match
formatting for the other man pages. This is for consistency, and also
because it will be helpful in a future patch to automatically check
that the files are synchronised.
Signed-off-by: Quentin Monnet <[email protected]>
Signed-off-by: Andrii Nakryiko <[email protected]>
Link: https://lore.kernel.org/bpf/[email protected]
|
|
Update bpftool's list of attach type names to tell it about the latest
attach types, or the "ringbuf" map. Also update the documentation, help
messages, and bash completion when relevant.
These missing items were reported by the newly added Python script used
to help maintain consistency in bpftool.
Signed-off-by: Quentin Monnet <[email protected]>
Signed-off-by: Andrii Nakryiko <[email protected]>
Link: https://lore.kernel.org/bpf/[email protected]
|
|
Whenever the eBPF subsystem gains new elements, such as new program or
map types, it is necessary to update bpftool if we want it able to
handle the new items.
In addition to the main arrays containing the names of these elements in
the source code, there are also multiple locations to update:
- The help message in the do_help() functions in bpftool's source code.
- The RST documentation files.
- The bash completion file.
This has led to omissions multiple times in the past. This patch
attempts to address this issue by adding consistency checks for all
these different locations. It also verifies that the bpf_prog_type,
bpf_map_type and bpf_attach_type enums from the UAPI BPF header have all
their members present in bpftool.
The script requires no argument to run, it reads and parses the
different files to check, and prints the mismatches, if any. It
currently reports a number of missing elements, which will be fixed in a
later patch:
$ ./test_bpftool_synctypes.py
Comparing [...]/linux/tools/bpf/bpftool/map.c (map_type_name) and [...]/linux/tools/bpf/bpftool/bash-completion/bpftool (BPFTOOL_MAP_CREATE_TYPES): {'ringbuf'}
Comparing BPF header (enum bpf_attach_type) and [...]/linux/tools/bpf/bpftool/common.c (attach_type_name): {'BPF_TRACE_ITER', 'BPF_XDP_DEVMAP', 'BPF_XDP', 'BPF_SK_REUSEPORT_SELECT', 'BPF_XDP_CPUMAP', 'BPF_SK_REUSEPORT_SELECT_OR_MIGRATE'}
Comparing [...]/linux/tools/bpf/bpftool/prog.c (attach_type_strings) and [...]/linux/tools/bpf/bpftool/prog.c (do_help() ATTACH_TYPE): {'skb_verdict'}
Comparing [...]/linux/tools/bpf/bpftool/prog.c (attach_type_strings) and [...]/linux/tools/bpf/bpftool/Documentation/bpftool-prog.rst (ATTACH_TYPE): {'skb_verdict'}
Comparing [...]/linux/tools/bpf/bpftool/prog.c (attach_type_strings) and [...]/linux/tools/bpf/bpftool/bash-completion/bpftool (BPFTOOL_PROG_ATTACH_TYPES): {'skb_verdict'}
Note that the script does NOT check for consistency between the list of
program types that bpftool claims it accepts and the actual list of
keywords that can be used. This is because bpftool does not "see" them,
they are ELF section names parsed by libbpf. It is not hard to parse the
section_defs[] array in libbpf, but some section names are associated
with program types that bpftool cannot load at the moment. For example,
some programs require a BTF target and an attach target that bpftool
cannot handle. The script may be extended to parse the array and check
only relevant values in the future.
The script is not added to the selftests' Makefile, because doing so
would require all patches with BPF UAPI change to also update bpftool.
Instead it is to be added to the CI.
Signed-off-by: Quentin Monnet <[email protected]>
Signed-off-by: Andrii Nakryiko <[email protected]>
Link: https://lore.kernel.org/bpf/[email protected]
|
|
Bash completion for bpftool gets two minor improvements in this patch.
Move the detection of attach types for "bpftool cgroup attach" outside
of the "case/esac" bloc, where we cannot reuse our variable holding the
list of supported attach types as a pattern list. After the change, we
have only one list of cgroup attach types to update when new types are
added, instead of the former two lists.
Also rename the variables holding lists of names for program types, map
types, and attach types, to make them more unique. This can make it
slightly easier to point people to the relevant variables to update, but
the main objective here is to help run a script to check that bash
completion is up-to-date with bpftool's source code.
Signed-off-by: Quentin Monnet <[email protected]>
Signed-off-by: Andrii Nakryiko <[email protected]>
Link: https://lore.kernel.org/bpf/[email protected]
|
|
This makes 'perf top' abort in some cases, and the right fix will
involve surgery that is too much to do at this stage, so revert for now
and fix it in the next merge window.
This reverts commit 2d6b74baa7147251c30a46c4996e8cc224aa2dc5.
Cc: Riccardo Mancini <[email protected]>
Cc: Ian Rogers <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Krister Johansen <[email protected]>
Cc: Mark Rutland <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
Add two new APIs: btf__load_vmlinux_btf and btf__load_module_btf.
btf__load_vmlinux_btf is just an alias to the existing API named
libbpf_find_kernel_btf, rename to be more precisely and consistent
with existing BTF APIs. btf__load_module_btf can be used to load
module BTF, add it for completeness. These two APIs are useful for
implementing tracing tools and introspection tools. This is part
of the effort towards libbpf 1.0 ([0]).
[0] Closes: https://github.com/libbpf/libbpf/issues/280
Signed-off-by: Hengqi Chen <[email protected]>
Signed-off-by: Andrii Nakryiko <[email protected]>
Link: https://lore.kernel.org/bpf/[email protected]
|
|
Split BTF objects are typically BTF objects for kernel modules, which
are incrementally built on top of kernel BTF instead of redefining all
kernel symbols they need. We can use bpftool with its -B command-line
option to dump split BTF objects. It works well when the handle provided
for the BTF object to dump is a "path" to the BTF object, typically
under /sys/kernel/btf, because bpftool internally calls
btf__parse_split() which can take a "base_btf" pointer and resolve the
BTF reconstruction (although in that case, the "-B" option is
unnecessary because bpftool performs autodetection).
However, it did not work so far when passing the BTF object through its
id, because bpftool would call btf__get_from_id() which did not provide
a way to pass a "base_btf" pointer.
In other words, the following works:
# bpftool btf dump file /sys/kernel/btf/i2c_smbus -B /sys/kernel/btf/vmlinux
But this was not possible:
# bpftool btf dump id 6 -B /sys/kernel/btf/vmlinux
The libbpf API has recently changed, and btf__get_from_id() has been
deprecated in favour of btf__load_from_kernel_by_id() and its version
with support for split BTF, btf__load_from_kernel_by_id_split(). Let's
update bpftool to make it able to dump the BTF object in the second case
as well.
Signed-off-by: Quentin Monnet <[email protected]>
Signed-off-by: Andrii Nakryiko <[email protected]>
Acked-by: John Fastabend <[email protected]>
Link: https://lore.kernel.org/bpf/[email protected]
|
|
Add a new API function btf__load_from_kernel_by_id_split(), which takes
a pointer to a base BTF object in order to support split BTF objects
when retrieving BTF information from the kernel.
Reference: https://github.com/libbpf/libbpf/issues/314
Signed-off-by: Quentin Monnet <[email protected]>
Signed-off-by: Andrii Nakryiko <[email protected]>
Acked-by: John Fastabend <[email protected]>
Link: https://lore.kernel.org/bpf/[email protected]
|
|
Replace the calls to function btf__get_from_id(), which we plan to
deprecate before the library reaches v1.0, with calls to
btf__load_from_kernel_by_id() in tools/ (bpftool, perf, selftests).
Update the surrounding code accordingly (instead of passing a pointer to
the btf struct, get it as a return value from the function).
Signed-off-by: Quentin Monnet <[email protected]>
Signed-off-by: Andrii Nakryiko <[email protected]>
Acked-by: John Fastabend <[email protected]>
Link: https://lore.kernel.org/bpf/[email protected]
|
|
Make sure to call btf__free() (and not simply free(), which does not
free all pointers stored in the struct) on pointers to struct btf
objects retrieved at various locations.
These were found while updating the calls to btf__get_from_id().
Fixes: 999d82cbc044 ("tools/bpf: enhance test_btf file testing to test func info")
Fixes: 254471e57a86 ("tools/bpf: bpftool: add support for func types")
Fixes: 7b612e291a5a ("perf tools: Synthesize PERF_RECORD_* for loaded BPF programs")
Fixes: d56354dc4909 ("perf tools: Save bpf_prog_info and BTF of new BPF programs")
Fixes: 47c09d6a9f67 ("bpftool: Introduce "prog profile" command")
Fixes: fa853c4b839e ("perf stat: Enable counting events for BPF programs")
Signed-off-by: Quentin Monnet <[email protected]>
Signed-off-by: Andrii Nakryiko <[email protected]>
Link: https://lore.kernel.org/bpf/[email protected]
|
|
Rename function btf__get_from_id() as btf__load_from_kernel_by_id() to
better indicate what the function does. Change the new function so that,
instead of requiring a pointer to the pointer to update and returning
with an error code, it takes a single argument (the id of the BTF
object) and returns the corresponding pointer. This is more in line with
the existing constructors.
The other tools calling the (soon-to-be) deprecated btf__get_from_id()
function will be updated in a future commit.
References:
- https://github.com/libbpf/libbpf/issues/278
- https://github.com/libbpf/libbpf/wiki/Libbpf:-the-road-to-v1.0#btfh-apis
Signed-off-by: Quentin Monnet <[email protected]>
Signed-off-by: Andrii Nakryiko <[email protected]>
Acked-by: John Fastabend <[email protected]>
Link: https://lore.kernel.org/bpf/[email protected]
|
|
As part of the effort to move towards a v1.0 for libbpf, rename
btf__load() function, used to "upload" BTF information into the kernel,
as btf__load_into_kernel(). This new name better reflects what the
function does.
References:
- https://github.com/libbpf/libbpf/issues/278
- https://github.com/libbpf/libbpf/wiki/Libbpf:-the-road-to-v1.0#btfh-apis
Signed-off-by: Quentin Monnet <[email protected]>
Signed-off-by: Andrii Nakryiko <[email protected]>
Acked-by: John Fastabend <[email protected]>
Link: https://lore.kernel.org/bpf/[email protected]
|
|
Variable "err" is initialised to -EINVAL so that this error code is
returned when something goes wrong in libbpf_find_prog_btf_id().
However, a recent change in the function made use of the variable in
such a way that it is set to 0 if retrieving linear information on the
program is successful, and this 0 value remains if we error out on
failures at later stages.
Let's fix this by setting err to -EINVAL later in the function.
Fixes: e9fc3ce99b34 ("libbpf: Streamline error reporting for high-level APIs")
Signed-off-by: Quentin Monnet <[email protected]>
Signed-off-by: Andrii Nakryiko <[email protected]>
Link: https://lore.kernel.org/bpf/[email protected]
|
|
Kernel functions referenced by .BTF_ids may be changed from global to static
and get inlined or get renamed/removed, and thus disappears from BTF.
This causes kernel build failure when resolve_btfids do id patch for symbols
in .BTF_ids in vmlinux. Update resolve_btfids to emit warning messages and
patch zero id for missing symbols instead of aborting kernel build process.
Suggested-by: Andrii Nakryiko <[email protected]>
Signed-off-by: Hengqi Chen <[email protected]>
Signed-off-by: Andrii Nakryiko <[email protected]>
Acked-by: Yonghong Song <[email protected]>
Link: https://lore.kernel.org/bpf/[email protected]
|
|
Pull kvm fixes from Paolo Bonzini:
"ARM:
- Fix MTE shared page detection
- Enable selftest's use of PMU registers when asked to
s390:
- restore 5.13 debugfs names
x86:
- fix sizes for vcpu-id indexed arrays
- fixes for AMD virtualized LAPIC (AVIC)
- other small bugfixes
Generic:
- access tracking performance test
- dirty_log_perf_test command line parsing fix
- Fix selftest use of obsolete pthread_yield() in favour of
sched_yield()
- use cpu_relax when halt polling
- fixed missing KVM_CLEAR_DIRTY_LOG compat ioctl"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
KVM: add missing compat KVM_CLEAR_DIRTY_LOG
KVM: use cpu_relax when halt polling
KVM: SVM: use vmcb01 in svm_refresh_apicv_exec_ctrl
KVM: SVM: tweak warning about enabled AVIC on nested entry
KVM: SVM: svm_set_vintr don't warn if AVIC is active but is about to be deactivated
KVM: s390: restore old debugfs names
KVM: SVM: delay svm_vcpu_init_msrpm after svm->vmcb is initialized
KVM: selftests: Introduce access_tracking_perf_test
KVM: selftests: Fix missing break in dirty_log_perf_test arg parsing
x86/kvm: fix vcpu-id indexed array sizes
KVM: x86: Check the right feature bit for MSR_KVM_ASYNC_PF_ACK access
docs: virt: kvm: api.rst: replace some characters
KVM: Documentation: Fix KVM_CAP_ENFORCE_PV_FEATURE_CPUID name
KVM: nSVM: Swap the parameter order for svm_copy_vmrun_state()/svm_copy_vmloadsave_state()
KVM: nSVM: Rename nested_svm_vmloadsave() to svm_copy_vmloadsave_state()
KVM: arm64: selftests: get-reg-list: actually enable pmu regs in pmu sublist
KVM: selftests: change pthread_yield to sched_yield
KVM: arm64: Fix detection of shared VMAs on guest fault
|
|
Daniel Borkmann says:
====================
pull-request: bpf 2021-07-29
The following pull-request contains BPF updates for your *net* tree.
We've added 9 non-merge commits during the last 14 day(s) which contain
a total of 20 files changed, 446 insertions(+), 138 deletions(-).
The main changes are:
1) Fix UBSAN out-of-bounds splat for showing XDP link fdinfo, from Lorenz Bauer.
2) Fix insufficient Spectre v4 mitigation in BPF runtime, from Daniel Borkmann,
Piotr Krysiuk and Benedict Schlueter.
3) Batch of fixes for BPF sockmap found under stress testing, from John Fastabend.
====================
Signed-off-by: David S. Miller <[email protected]>
|
|
Recently we added a new option, SKBMOD_F_ECN, to tc-skbmod(8). Add a
control-plane selftest for it.
Depends on kernel patch "net/sched: act_skbmod: Add SKBMOD_F_ECN option
support", as well as iproute2 patch "tc/skbmod: Introduce SKBMOD_F_ECN
option".
Reviewed-by: Cong Wang <[email protected]>
Signed-off-by: Peilin Ye <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
Current max cgroup storage value size is 4k (PAGE_SIZE). The other local
storages accept up to 64k (BPF_LOCAL_STORAGE_MAX_VALUE_SIZE). Let's align
max cgroup value size with the other storages.
For percpu, the max is 32k (PCPU_MIN_UNIT_SIZE) because percpu
allocator is not happy about larger values.
netcnt test is extended to exercise those maximum values
(non-percpu max size is close to, but not real max).
v4:
* remove inner union (Andrii Nakryiko)
* keep net_cnt on the stack (Andrii Nakryiko)
v3:
* refine SIZEOF_BPF_LOCAL_STORAGE_ELEM comment (Yonghong Song)
* anonymous struct in percpu_net_cnt & net_cnt (Yonghong Song)
* reorder free (Yonghong Song)
v2:
* cap max_value_size instead of BUILD_BUG_ON (Martin KaFai Lau)
Signed-off-by: Stanislav Fomichev <[email protected]>
Signed-off-by: Andrii Nakryiko <[email protected]>
Acked-by: Martin KaFai Lau <[email protected]>
Link: https://lore.kernel.org/bpf/[email protected]
|
|
When loading in parallel multiple programs which use the same to-be
pinned map, it is possible that two instances of the loader will call
bpf_object__create_maps() at the same time. If the map doesn't exist
when both instances call bpf_object__reuse_map(), then one of the
instances will fail with EEXIST when calling bpf_map__pin().
Fix the race by retrying reusing a map if bpf_map__pin() returns
EEXIST. The fix is similar to the one in iproute2: e4c4685fd6e4 ("bpf:
Fix race condition with map pinning").
Before retrying the pinning, we don't do any special cleaning of an
internal map state. The closer code inspection revealed that it's not
required:
- bpf_object__create_map(): map->inner_map is destroyed after a
successful call, map->fd is closed if pinning fails.
- bpf_object__populate_internal_map(): created map elements is
destroyed upon close(map->fd).
- init_map_slots(): slots are freed after their initialization.
Signed-off-by: Martynas Pumputis <[email protected]>
Signed-off-by: Andrii Nakryiko <[email protected]>
Link: https://lore.kernel.org/bpf/[email protected]
|
|
Remove the repeated word 'the' in line 48.
Signed-off-by: Jason Wang <[email protected]>
Signed-off-by: Andrii Nakryiko <[email protected]>
Acked-by: Yonghong Song <[email protected]>
Link: https://lore.kernel.org/bpf/[email protected]
|
|
This test measures the performance effects of KVM's access tracking.
Access tracking is driven by the MMU notifiers test_young, clear_young,
and clear_flush_young. These notifiers do not have a direct userspace
API, however the clear_young notifier can be triggered by marking a
pages as idle in /sys/kernel/mm/page_idle/bitmap. This test leverages
that mechanism to enable access tracking on guest memory.
To measure performance this test runs a VM with a configurable number of
vCPUs that each touch every page in disjoint regions of memory.
Performance is measured in the time it takes all vCPUs to finish
touching their predefined region.
Example invocation:
$ ./access_tracking_perf_test -v 8
Testing guest mode: PA-bits:ANY, VA-bits:48, 4K pages
guest physical test memory offset: 0xffdfffff000
Populating memory : 1.337752570s
Writing to populated memory : 0.010177640s
Reading from populated memory : 0.009548239s
Mark memory idle : 23.973131748s
Writing to idle memory : 0.063584496s
Mark memory idle : 24.924652964s
Reading from idle memory : 0.062042814s
Breaking down the results:
* "Populating memory": The time it takes for all vCPUs to perform the
first write to every page in their region.
* "Writing to populated memory" / "Reading from populated memory": The
time it takes for all vCPUs to write and read to every page in their
region after it has been populated. This serves as a control for the
later results.
* "Mark memory idle": The time it takes for every vCPU to mark every
page in their region as idle through page_idle.
* "Writing to idle memory" / "Reading from idle memory": The time it
takes for all vCPUs to write and read to every page in their region
after it has been marked idle.
This test should be portable across architectures but it is only enabled
for x86_64 since that's all I have tested.
Reviewed-by: Ben Gardon <[email protected]>
Signed-off-by: David Matlack <[email protected]>
Message-Id: <[email protected]>
Signed-off-by: Paolo Bonzini <[email protected]>
|
|
There is a missing break statement which causes a fallthrough to the
next statement where optarg will be null and a segmentation fault will
be generated.
Fixes: 9e965bb75aae ("KVM: selftests: Add backing src parameter to dirty_log_perf_test")
Reviewed-by: Ben Gardon <[email protected]>
Signed-off-by: David Matlack <[email protected]>
Message-Id: <[email protected]>
Signed-off-by: Paolo Bonzini <[email protected]>
|
|
It turns out that certain types of early boot bugs can result in reboot
loops, even within a guest OS running under qemu/KVM. This commit
therefore upgrades the kvm-test-1-run-qemu.sh script's hang-detection
heuristics to detect such situations and to terminate the run when
they occur.
Signed-off-by: Paul E. McKenney <[email protected]>
|
|
The kvm-test-1-run-qemu.sh script logs the torture-test start time and
also when it starts getting impatient for the test to finish. However, it
does not timestamp these log messages, which can make debugging needlessly
challenging. This commit therefore adds timestamps to these messages.
Signed-off-by: Paul E. McKenney <[email protected]>
|
|
There was a time long ago when the "test" command's documentation
claimed that the "-a" and "-o" arguments did something useful.
But this documentation now suggests letting the shell execute
these boolean operators, so this commit applies that suggestion to
kvm-test-1-run-qemu.sh.
Signed-off-by: Paul E. McKenney <[email protected]>
|
|
This commit causes kvm-test-1-run-batch.sh to use the new
kvm-assign-cpus.sh and kvm-get-cpus-script.sh scripts to create a
TORTURE_AFFINITY environment variable containing either an empty string
(for no affinity) or a list of CPUs to pin the scenario's vCPUs to.
The additional change to kvm-test-1-run.sh places the per-scenario
number-of-CPUs information where it can easily be found.
If there is some reason why affinity cannot be supplied, this commit
prints and logs the reason via changes to kvm-again.sh.
Finally, this commit updates the kvm-remote.sh script to copy the
qemu-affinity output files back to the host system.
Signed-off-by: Paul E. McKenney <[email protected]>
|
|
There is "qemu-affinity", "qemu-cmd", "qemu-retval", but also "qemu_pid".
This is hard to remember, not so good for bash tab completion, and just
plain inconsistent. This commit therefore renames the "qemu_pid" file to
"qemu-pid". A couple of the scripts must deal with old runs, and thus
must handle both "qemu_pid" and "qemu-pid", but new runs will produce
"qemu-pid".
Signed-off-by: Paul E. McKenney <[email protected]>
|
|
The jitter.sh script has some entertaining awk code to generate a
hex mask from a randomly selected CPU number, which is handed to the
"taskset" command. Except that this command has a "-c" parameter to
take a comma/dash-separated list of CPU numbers. This commit therefore
saves a few lines of awk by switching to a single-number CPU list.
Signed-off-by: Paul E. McKenney <[email protected]>
|
|
There is no way to place the vCPUs in a two-CPU rcutorture scenario to
get variable memory latency. This commit therefore upgrades the current
two-CPU rcutorture scenarios to four CPUs.
Signed-off-by: Paul E. McKenney <[email protected]>
|
|
This commit causes the kvm-test-1-run-qemu.sh script to check the
TORTURE_AFFINITY environment variable and to add "taskset" commands to
the qemu-cmd file. The first "taskset" command is applied only if the
TORTURE_AFFINITY environment variable is a non-empty string, and this
command pins the current scenario's guest OS to the specified CPUs.
The second "taskset" command reports the guest OS's affinity in a new
"qemu-affinity" file.
Signed-off-by: Paul E. McKenney <[email protected]>
|
|
Currently, kvm-test-1-run-qemu.sh applies redirection to each and every
line of each qemu-cmd script. Only the first line (the only one that
is not a bash comment) needs to be redirected. Although redirecting
the comments is currently harmless, just adding to the comment, it is
an accident waiting to happen. This commit therefore adjusts the "sed"
command to redirect only the qemu-system* command itself.
Signed-off-by: Paul E. McKenney <[email protected]>
|
|
This commit causes kvm.sh to use the new kvm-assign-cpus.sh and
kvm-get-cpus-script.sh scripts to create a TORTURE_AFFINITY environment
variable containing either an empty string (for no affinity) or a list
of CPUs to pin the scenario's vCPUs to. A later commit will make
use of this information to actually pin the vCPUs.
Signed-off-by: Paul E. McKenney <[email protected]>
|
|
Commit c47a5599eda324ba ("perf tools: Fix pattern matching for same
substring in different PMU type"), may have fixed some alias matching,
but has broken some others.
Firstly it cannot handle the simple scenario of PMU name in form
pmu_name{digits} - it can only handle pmu_name_{digits}.
Secondly it cannot handle more complex matching in the case where we
have multiple tokens. In this scenario, the code failed to realise that
we may examine multiple substrings in the PMU name.
Fix in two ways:
- Change perf_pmu__valid_suffix() to accept a PMU name without '_' in the
suffix
- Only pay attention to perf_pmu__valid_suffix() for the final token
Also add const qualifiers as necessary to avoid casting.
Fixes: c47a5599eda324ba ("perf tools: Fix pattern matching for same substring in different PMU type")
Signed-off-by: John Garry <[email protected]>
Tested-by: Jin Yao <[email protected]>
Cc: Alexander Shishkin <[email protected]>
Cc: Ian Rogers <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Kajol Jain <[email protected]>
Cc: Mark Rutland <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Link: http://lore.kernel.org/lkml/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
Currently --dump-raw-trace skips queueing and splitting buffers because
of an early exit condition in cs_etm__process_auxtrace_info(). Once
that is removed we can print the split data by using the queues
and searching for split buffers with the same reference as the
one that is currently being processed.
This keeps the same behaviour of dumping in file order when an AUXTRACE
event appears, rather than moving trace dump to where AUX records are in
the file.
There will be a newline and size printout for each fragment. For example
this buffer is comprised of two AUX records, but was printed as one:
0 0 0x8098 [0x30]: PERF_RECORD_AUXTRACE size: 0xa0 offset: 0 ref: 0x491a4dfc52fc0e6e idx: 0 t
. ... CoreSight ETM Trace data: size 160 bytes
Idx:0; ID:10; I_ASYNC : Alignment Synchronisation.
Idx:12; ID:10; I_TRACE_INFO : Trace Info.; INFO=0x0 { CC.0 }
Idx:17; ID:10; I_ADDR_L_64IS0 : Address, Long, 64 bit, IS0.; Addr=0x0000000000000000;
Idx:80; ID:10; I_ASYNC : Alignment Synchronisation.
Idx:92; ID:10; I_TRACE_INFO : Trace Info.; INFO=0x0 { CC.0 }
Idx:97; ID:10; I_ADDR_L_64IS0 : Address, Long, 64 bit, IS0.; Addr=0xFFFFDE2AD3FD76D4;
But is now printed as two fragments:
0 0 0x8098 [0x30]: PERF_RECORD_AUXTRACE size: 0xa0 offset: 0 ref: 0x491a4dfc52fc0e6e idx: 0 t
. ... CoreSight ETM Trace data: size 80 bytes
Idx:0; ID:10; I_ASYNC : Alignment Synchronisation.
Idx:12; ID:10; I_TRACE_INFO : Trace Info.; INFO=0x0 { CC.0 }
Idx:17; ID:10; I_ADDR_L_64IS0 : Address, Long, 64 bit, IS0.; Addr=0x0000000000000000;
. ... CoreSight ETM Trace data: size 80 bytes
Idx:80; ID:10; I_ASYNC : Alignment Synchronisation.
Idx:92; ID:10; I_TRACE_INFO : Trace Info.; INFO=0x0 { CC.0 }
Idx:97; ID:10; I_ADDR_L_64IS0 : Address, Long, 64 bit, IS0.; Addr=0xFFFFDE2AD3FD76D4;
Decoding errors that appeared in problematic files are now not present,
for example:
Idx:808; ID:1c; I_BAD_SEQUENCE : Invalid Sequence in packet.[I_ASYNC]
...
PKTP_ETMV4I_0016 : 0x0014 (OCSD_ERR_INVALID_PCKT_HDR) [Invalid packet header]; TrcIdx=822
Signed-off-by: James Clark <[email protected]>
Reviewed-by: Mathieu Poirier <[email protected]>
Tested-by: Leo Yan <[email protected]>
Cc: Al Grant <[email protected]>
Cc: Alexander Shishkin <[email protected]>
Cc: Anshuman Khandual <[email protected]>
Cc: Branislav Rankov <[email protected]>
Cc: Denis Nikitin <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: John Garry <[email protected]>
Cc: Mark Rutland <[email protected]>
Cc: Mike Leach <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Suzuki Poulouse <[email protected]>
Cc: Will Deacon <[email protected]>
Cc: [email protected]
Cc: [email protected]
Link: http://lore.kernel.org/lkml/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
We need the driver-core fixes in here as well.
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
In the tc_redirect test only use ping6 if it's available and
otherwise fall back to using "ping -6".
Signed-off-by: Jussi Maki <[email protected]>
|
|
Move CO-RE logic into separate file.
The internal interface between libbpf and CO-RE is through
bpf_core_apply_relo_insn() function and few structs defined in relo_core.h.
Signed-off-by: Alexei Starovoitov <[email protected]>
Signed-off-by: Andrii Nakryiko <[email protected]>
Link: https://lore.kernel.org/bpf/[email protected]
|
|
In order to make a clean split of CO-RE logic move its types
into independent header file.
Signed-off-by: Alexei Starovoitov <[email protected]>
Signed-off-by: Andrii Nakryiko <[email protected]>
Link: https://lore.kernel.org/bpf/[email protected]
|
|
bpf_core_apply_relo() doesn't need to know bpf_program internals
and hashmap details.
Signed-off-by: Alexei Starovoitov <[email protected]>
Signed-off-by: Andrii Nakryiko <[email protected]>
Link: https://lore.kernel.org/bpf/[email protected]
|
|
CO-RE processing functions don't need to know 'struct bpf_program' details.
Cleanup the layering to eventually be able to move CO-RE logic into a separate file.
Signed-off-by: Alexei Starovoitov <[email protected]>
Signed-off-by: Andrii Nakryiko <[email protected]>
Link: https://lore.kernel.org/bpf/[email protected]
|
|
Add a simple selftest for a move_mount(MOVE_MOUNT_SET_GROUP). This tests
that one can copy sharing from one mount from nested mntns with nested
userns owner to another mount from other nested mntns with other nested
userns owner while in their parent userns.
TAP version 13
1..1
# Starting 1 tests from 2 test cases.
# RUN move_mount_set_group.complex_sharing_copying ...
# OK move_mount_set_group.complex_sharing_copying
ok 1 move_mount_set_group.complex_sharing_copying
# PASSED: 1 / 1 tests passed.
# Totals: pass:1 fail:0 xfail:0 xpass:0 skip:0 error:0
Link: https://lore.kernel.org/r/[email protected]
Cc: Shuah Khan <[email protected]>
Cc: Eric W. Biederman <[email protected]>
Cc: Alexander Viro <[email protected]>
Cc: Christian Brauner <[email protected]>
Cc: Mattias Nissler <[email protected]>
Cc: Aleksa Sarai <[email protected]>
Cc: Andrei Vagin <[email protected]>
Cc: [email protected]
Cc: [email protected]
Cc: lkml <[email protected]>
Signed-off-by: Pavel Tikhomirov <[email protected]>
Signed-off-by: Christian Brauner <[email protected]>
|
|
We need the char-misc fixes from 5.14-rc3 into here as well.
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
This test passes pointers obtained from anon_allocate_area to the
userfaultfd and mremap APIs. This causes a problem if the system
allocator returns tagged pointers because with the tagged address ABI
the kernel rejects tagged addresses passed to these APIs, which would
end up causing the test to fail. To make this test compatible with such
system allocators, stop using the system allocator to allocate memory in
anon_allocate_area, and instead just use mmap.
Link: https://lkml.kernel.org/r/[email protected]
Link: https://linux-review.googlesource.com/id/Icac91064fcd923f77a83e8e133f8631c5b8fc241
Fixes: c47174fc362a ("userfaultfd: selftest")
Co-developed-by: Lokesh Gidra <[email protected]>
Signed-off-by: Lokesh Gidra <[email protected]>
Signed-off-by: Peter Collingbourne <[email protected]>
Reviewed-by: Catalin Marinas <[email protected]>
Cc: Vincenzo Frascino <[email protected]>
Cc: Dave Martin <[email protected]>
Cc: Will Deacon <[email protected]>
Cc: Andrea Arcangeli <[email protected]>
Cc: Alistair Delva <[email protected]>
Cc: William McVicker <[email protected]>
Cc: Evgenii Stepanov <[email protected]>
Cc: Mitch Phillips <[email protected]>
Cc: Andrey Konovalov <[email protected]>
Cc: <[email protected]> [5.4]
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
|
|
Add a list of vmtest script dependencies to make it easier for new
contributors to get going.
Signed-off-by: Evgeniy Litvinenko <[email protected]>
Signed-off-by: Andrii Nakryiko <[email protected]>
Link: https://lore.kernel.org/bpf/[email protected]
|
|
Add bpf_map__pin_path, so that the inconsistently named
bpf_map__get_pin_path can be deprecated later. This is part of the
effort towards libbpf v1.0: https://github.com/libbpf/libbpf/issues/307
Also, add a selftest for the new function.
Signed-off-by: Evgeniy Litvinenko <[email protected]>
Signed-off-by: Andrii Nakryiko <[email protected]>
Link: https://lore.kernel.org/bpf/[email protected]
|
|
This patch adds tests for the batching and bpf_(get|set)sockopt in
bpf tcp iter.
It first creates:
a) 1 non SO_REUSEPORT listener in lhash2.
b) 256 passive and active fds connected to the listener in (a).
c) 256 SO_REUSEPORT listeners in one of the lhash2 bucket.
The test sets all listeners and connections to bpf_cubic before
running the bpf iter.
The bpf iter then calls setsockopt(TCP_CONGESTION) to switch
each listener and connection from bpf_cubic to bpf_dctcp.
The bpf iter has a random_retry mode such that it can return EAGAIN
to the usespace in the middle of a batch.
Signed-off-by: Martin KaFai Lau <[email protected]>
Signed-off-by: Andrii Nakryiko <[email protected]>
Reviewed-by: Eric Dumazet <[email protected]>
Acked-by: Kuniyuki Iwashima <[email protected]>
Acked-by: Yonghong Song <[email protected]>
Link: https://lore.kernel.org/bpf/[email protected]
|
|
Conflicts are simple overlapping changes.
Signed-off-by: David S. Miller <[email protected]>
|