| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Commit 7f76b31130680fb3 ("perf list: Add IBM z16 event description for
s390") contains the verbal description for z16 extended counter set.
However some entries of the public description contain UTF-8 characters
which breaks the build on some distros.
Fix this and remove the UTF-8 characters.
Fixes: 7f76b31130680fb3 ("perf list: Add IBM z16 event description for s390")
Reported-by: Arnaldo Carvalho de Melo <[email protected]>
Suggested-by: Heiko Carstens <[email protected]>
Signed-off-by: Thomas Richter <[email protected]>
Tested-by: Arnaldo Carvalho de Melo <[email protected]>
Cc: Sumanth Korikkar <[email protected]>
Cc: Sven Schnelle <[email protected]>
Cc: Thomas Richter <[email protected]>
Cc: Vasily Gorbik <[email protected]>
Link: https://lore.kernel.org/r/ZBwkl77/I31AQk12@osiris
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
The earlier commit f0cdde28fecc0d7f ("perf hist: Improve srcfile sort
key performance") updated the srcfile logic but missed to change the
->cmp() callback which is called for every sample.
It should use the same logic like in the srcline to speed up the
processing because it'd return the same information repeatedly for the
same address. The real processing will be done in
sort__srcfile_collapse().
Fixes: f0cdde28fecc0d7f ("perf hist: Improve srcfile sort key performance")
Signed-off-by: Namhyung Kim <[email protected]>
Cc: Adrian Hunter <[email protected]>
Cc: Ian Rogers <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
The test case "perf test 'Setup struct perf_event_attr'" is failing.
On s390 this output is observed:
# ./perf test -Fvvvv 17
17: Setup struct perf_event_attr :
--- start ---
running './tests/attr/test-stat-C0'
Using CPUID IBM,8561,703,T01,3.6,002f
.....
Event event:base-stat
fd = 1
group_fd = -1
flags = 0|8
cpu = *
type = 0
size = 128 <<<--- wrong, specified in file base-stat
config = 0
sample_period = 0
sample_type = 65536
...
'PERF_TEST_ATTR=/tmp/tmpgw574wvg ./perf stat -o \
/tmp/tmpgw574wvg/perf.data -e cycles -C 0 kill >/dev/null \
2>&1 ret '1', expected '1'
loading result events
Event event-0-0-4
fd = 4
group_fd = -1
cpu = 0
pid = -1
flags = 8
type = 0
size = 136 <<<--- actual size used in system call
.....
compare
matching [event-0-0-4]
to [event:base-stat]
[cpu] 0 *
[flags] 8 0|8
[type] 0 0
[size] 136 128
->FAIL
match: [event-0-0-4] matches []
expected size=136, got 128
FAILED './tests/attr/test-stat-C0' - match failure
This mismatch is caused by
commit 09519ec3b19e ("perf: Add perf_event_attr::config3")
which enlarges the structure perf_event_attr by 8 bytes.
Fix this by adjusting the expected value of size.
Output after:
# ./perf test -Fvvvv 17
17: Setup struct perf_event_attr :
--- start ---
running './tests/attr/test-stat-C0'
Using CPUID IBM,8561,703,T01,3.6,002f
...
matched
compare
matching [event-0-0-4]
to [event:base-stat]
[cpu] 0 *
[flags] 8 0|8
[type] 0 0
[size] 136 136
....
->OK
match: [event-0-0-4] matches ['event:base-stat']
matched
Fixes: 09519ec3b19e4144 ("perf: Add perf_event_attr::config3")
Signed-off-by: Thomas Richter <[email protected]>
Acked-by: Namhyung Kim <[email protected]>
Cc: Heiko Carstens <[email protected]>
Cc: Rob Herring <[email protected]>
Cc: Sumanth Korikkar <[email protected]>
Cc: Sven Schnelle <[email protected]>
Cc: Vasily Gorbik <[email protected]>
Cc: Will Deacon <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
The warning advises on the NO_BPF_SKEL=1 option.
Suggested-by: Stephen Rothwell <[email protected]>
Signed-off-by: Ian Rogers <[email protected]>
Cc: Adrian Hunter <[email protected]>
Cc: Alexander Shishkin <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Mark Rutland <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
Append information about inlined functions to FP and LBR callchains from
DWARF debuginfo when available. Do so by calling append_inlines() from
add_callchain_ip().
Testing it:
Frame-pointer mode recorded with 'perf record --call-graph=fp --freq=max -- ./a.out'
#include <stdio.h>
#include <stdint.h>
static __attribute__((noinline)) uint32_t func5(uint32_t i)
{
return i + 10;
}
static uint32_t func4(uint32_t i)
{
return func5(i + 5);
}
static inline uint32_t func3(uint32_t i)
{
return func4(i + 4);
}
static __attribute__((noinline)) uint32_t func2(uint32_t i)
{
return func3(i + 3);
}
static uint32_t func1(uint32_t i)
{
return func2(i + 2);
}
__attribute__((noinline)) uint64_t entry(void)
{
uint64_t ret = 0;
uint32_t i = 0;
for (i = 0; i < 1000000; i++) {
ret += func1(i);
ret -= func2(i);
ret += func3(i);
ret += func4(i);
ret -= func5(i);
}
return ret;
}
int main(int argc, char **argv)
{
printf("%s\n", __func__);
return entry();
}
======
Here is the output I get with '--call-graph callee --no-children'
======
# To display the perf.data header info, please use --header/--header-only options.
#
#
# Total Lost Samples: 0
#
# Samples: 250 of event 'cycles:u'
# Event count (approx.): 26819859
#
# Overhead Command Shared Object Symbol
# ........ ....... .................... .....................................
#
43.58% a.out a.out [.] func5
|
|--28.93%--entry
| main
| __libc_start_call_main
|
--14.65%--func4 (inlined)
|
|--10.45%--entry
| main
| __libc_start_call_main
|
--4.20%--func3 (inlined)
entry
main
__libc_start_call_main
38.80% a.out a.out [.] entry
|
|--23.27%--func4 (inlined)
| |
| |--20.28%--func3 (inlined)
| | func2
| | main
| | __libc_start_call_main
| |
| --2.99%--entry
| main
| __libc_start_call_main
|
|--8.17%--func5
| main
| __libc_start_call_main
|
|--3.89%--func1 (inlined)
| entry
| main
| __libc_start_call_main
|
--3.48%--entry
main
__libc_start_call_main
13.07% a.out a.out [.] func2
|
---func5
main
__libc_start_call_main
1.54% a.out [unknown] [k] 0xffffffff81e011b7
1.16% a.out [unknown] [k] 0xffffffff81e00193
|
--0.57%--__mmap64 (inlined)
__mmap64 (inlined)
0.34% a.out ld-linux-x86-64.so.2 [.] __tunable_get_val
0.34% a.out ld-linux-x86-64.so.2 [.] strcmp
0.32% a.out libc.so.6 [.] strchr
0.31% a.out ld-linux-x86-64.so.2 [.] _dl_relocate_object
0.22% a.out ld-linux-x86-64.so.2 [.] _dl_init_paths
0.18% a.out ld-linux-x86-64.so.2 [.] get_common_cache_info.constprop.0
0.14% a.out ld-linux-x86-64.so.2 [.] __GI___tunables_init
#
# (Tip: Show individual samples with: perf script)
#
======
It does not seem to be out of order, or at least it is consistent with
what I get with dwarf unwinders.
Committer notes:
Adrian Hunter pointed out that this breaks --branch-history, so don't do
it for branches, see the second Link below.
Suggested-by: Andrii Nakryiko <[email protected]>
Signed-off-by: <[email protected]>
Acked-by: Namhyung Kim <[email protected]>
Cc: Adrian Hunter <[email protected]>
Cc: Alexander Shishkin <[email protected]>
Cc: Ian Rogers <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Mark Rutland <[email protected]>
Cc: Masami Hiramatsu <[email protected]>
Cc: Milian Wolff <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
This updates expected return values for invalid buffer test. Now such
values are returned from transport, not from af_vsock.c.
Signed-off-by: Arseniy Krasnov <[email protected]>
Reviewed-by: Stefano Garzarella <[email protected]>
Signed-off-by: Paolo Abeni <[email protected]>
|
|
We need the fixes in here for testing, as well as the driver core
changes for documentation updates to build on.
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
In commit 22df776a9a86 ("tasks: Extract rcu_users out of union"), the
'refcount_t rcu_users' field was extracted out of a union with the
'struct rcu_head rcu' field. This allows us to safely perform a
refcount_inc_not_zero() on task->rcu_users when acquiring a reference on
a task struct. A prior patch leveraged this by making struct task_struct
an RCU-protected object in the verifier, and by bpf_task_acquire() to
use the task->rcu_users field for synchronization.
Now that we can use RCU to protect tasks, we no longer need
bpf_task_kptr_get(), or bpf_task_acquire_not_zero(). bpf_task_kptr_get()
is truly completely unnecessary, as we can just use RCU to get the
object. bpf_task_acquire_not_zero() is now equivalent to
bpf_task_acquire().
In addition to these changes, this patch also updates the associated
selftests to no longer use these kfuncs.
Signed-off-by: David Vernet <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Alexei Starovoitov <[email protected]>
|
|
struct task_struct objects are a bit interesting in terms of how their
lifetime is protected by refcounts. task structs have two refcount
fields:
1. refcount_t usage: Protects the memory backing the task struct. When
this refcount drops to 0, the task is immediately freed, without
waiting for an RCU grace period to elapse. This is the field that
most callers in the kernel currently use to ensure that a task
remains valid while it's being referenced, and is what's currently
tracked with bpf_task_acquire() and bpf_task_release().
2. refcount_t rcu_users: A refcount field which, when it drops to 0,
schedules an RCU callback that drops a reference held on the 'usage'
field above (which is acquired when the task is first created). This
field therefore provides a form of RCU protection on the task by
ensuring that at least one 'usage' refcount will be held until an RCU
grace period has elapsed. The qualifier "a form of" is important
here, as a task can remain valid after task->rcu_users has dropped to
0 and the subsequent RCU gp has elapsed.
In terms of BPF, we want to use task->rcu_users to protect tasks that
function as referenced kptrs, and to allow tasks stored as referenced
kptrs in maps to be accessed with RCU protection.
Let's first determine whether we can safely use task->rcu_users to
protect tasks stored in maps. All of the bpf_task* kfuncs can only be
called from tracepoint, struct_ops, or BPF_PROG_TYPE_SCHED_CLS, program
types. For tracepoint and struct_ops programs, the struct task_struct
passed to a program handler will always be trusted, so it will always be
safe to call bpf_task_acquire() with any task passed to a program.
Note, however, that we must update bpf_task_acquire() to be KF_RET_NULL,
as it is possible that the task has exited by the time the program is
invoked, even if the pointer is still currently valid because the main
kernel holds a task->usage refcount. For BPF_PROG_TYPE_SCHED_CLS, tasks
should never be passed as an argument to the any program handlers, so it
should not be relevant.
The second question is whether it's safe to use RCU to access a task
that was acquired with bpf_task_acquire(), and stored in a map. Because
bpf_task_acquire() now uses task->rcu_users, it follows that if the task
is present in the map, that it must have had at least one
task->rcu_users refcount by the time the current RCU cs was started.
Therefore, it's safe to access that task until the end of the current
RCU cs.
With all that said, this patch makes struct task_struct is an
RCU-protected object. In doing so, we also change bpf_task_acquire() to
be KF_ACQUIRE | KF_RCU | KF_RET_NULL, and adjust any selftests as
necessary. A subsequent patch will remove bpf_task_kptr_get(), and
bpf_task_acquire_not_zero() respectively.
Signed-off-by: David Vernet <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Alexei Starovoitov <[email protected]>
|
|
Fix few potentially unitialized variables uses, found while building
veristat.c in release (-O2) mode.
Signed-off-by: Andrii Nakryiko <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Alexei Starovoitov <[email protected]>
|
|
Drop linux/compiler.h include, which seems to be needed for ARRAY_SIZE
macro only. Redefine own version of ARRAY_SIZE instead.
Signed-off-by: Andrii Nakryiko <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Alexei Starovoitov <[email protected]>
|
|
For packaging version of the tool is important, so add a simple way to
specify veristat version for upstream mirror at Github.
Signed-off-by: Andrii Nakryiko <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Alexei Starovoitov <[email protected]>
|
|
Dual-license veristat.c to dual GPL-2.0-only or BSD-2-Clause license.
This is needed to mirror it to Github to make it convenient for distro
packagers to package veristat as a separate package.
Veristat grew into a useful tool by itself, and there are already
a bunch of users relying on veristat as generic BPF loading and
verification helper tool. So making it easy to packagers by providing
Github mirror just like we do for bpftool and libbpf is the next step to
get veristat into the hands of users.
Apart from few typo fixes, I'm the sole contributor to veristat.c so
far, so no extra Acks should be needed for relicensing.
Signed-off-by: Andrii Nakryiko <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Alexei Starovoitov <[email protected]>
|
|
bench_local_storage_create
The fork function in gcc is considered a built in function due to
being used by libgcov when building with gnu extensions.
Rename fork to sched_process_fork to prevent this conflict.
See details:
https://github.com/gcc-mirror/gcc/commit/d1c38823924506d389ca58d02926ace21bdf82fa
https://gcc.gnu.org/bugzilla/show_bug.cgi?id=82457
Fixes the following error:
In file included from progs/bench_local_storage_create.c:6:
progs/bench_local_storage_create.c:43:14: error: conflicting types for
built-in function 'fork'; expected 'int(void)'
[-Werror=builtin-declaration-mismatch]
43 | int BPF_PROG(fork, struct task_struct *parent, struct
task_struct *child)
| ^~~~
Fixes: cbe9d93d58b1 ("selftests/bpf: Add bench for task storage creation")
Signed-off-by: James Hilliard <[email protected]>
Signed-off-by: Andrii Nakryiko <[email protected]>
Link: https://lore.kernel.org/bpf/[email protected]
|
|
Replacing extract_build_id with read_build_id that parses out
build id directly from elf without using readelf tool.
Acked-by: Andrii Nakryiko <[email protected]>
Signed-off-by: Jiri Olsa <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Alexei Starovoitov <[email protected]>
|
|
Adding read_build_id function that parses out build id from
specified binary.
It will replace extract_build_id and also be used in following
changes.
Signed-off-by: Jiri Olsa <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Alexei Starovoitov <[email protected]>
|
|
Moving error macros from profiler.inc.h to new err.h header.
It will be used in following changes.
Also adding PTR_ERR macro that will be used in following changes.
Acked-by: Andrii Nakryiko <[email protected]>
Signed-off-by: Jiri Olsa <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Alexei Starovoitov <[email protected]>
|
|
When compiling selftests with target mount_setattr I encountered some errors with the below messages:
mount_setattr_test.c: In function ‘mount_setattr_thread’:
mount_setattr_test.c:343:16: error: variable ‘attr’ has initializer but incomplete type
343 | struct mount_attr attr = {
| ^~~~~~~~~~
These errors might be because of linux/mount.h is not included. This patch resolves that issue.
Signed-off-by: Anh Tuan Phan <[email protected]>
Acked-by: Christian Brauner <[email protected]>
Signed-off-by: Shuah Khan <[email protected]>
|
|
This is what I've been using to see whether the spec makes sense.
A small subset of getters (mostly the unprivileged ones) is implemented.
Some setters (channels) also work.
Setters for messages with bitmasks are not implemented.
Initially I was trying to make this tool look 1:1 like real ethtool,
but eventually gave up :-)
Sample output:
$ ./tools/net/ynl/ethtool enp0s31f6
Settings for enp0s31f6:
Supported ports: [ TP ]
Supported link modes: 10baseT/Half 10baseT/Full 100baseT/Half
100baseT/Full 1000baseT/Full
Supported pause frame use: no
Supports auto-negotiation: yes
Supported FEC modes: Not reported
Speed: Unknown!
Duplex: Unknown! (255)
Auto-negotiation: on
Port: Twisted Pair
PHYAD: 2
Transceiver: Internal
MDI-X: Unknown (auto)
Current message level: drv probe link
Link detected: no
Signed-off-by: Stanislav Fomichev <[email protected]>
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
Instead of dumping the error on the stdout, make the callee and
opportunity to decide what to do with it. This is mostly for the
ethtool testing.
Signed-off-by: Stanislav Fomichev <[email protected]>
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
Used by ethtool spec.
Signed-off-by: Stanislav Fomichev <[email protected]>
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
Add a selftest that configures metadata tunnel encapsulation using the TC
"tunnel_key" action: it includes a test case for setting "nofrag" flag.
Example output:
# selftests: net/forwarding: tc_tunnel_key.sh
# TEST: tunnel_key nofrag (skip_hw) [ OK ]
# INFO: Could not test offloaded functionality
ok 1 selftests: net/forwarding: tc_tunnel_key.sh
Signed-off-by: Davide Caratti <[email protected]>
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
# ./tdc.py -e 6bda -l
6bda: (actions, tunnel_key) Add tunnel_key action with nofrag option
Acked-by: Jamal Hadi Salim <[email protected]>
Signed-off-by: Davide Caratti <[email protected]>
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
currently, users can skip individual test cases by means of writing
"skip": "yes"
in the scenario file. Extend this functionality, introducing 'dependsOn':
it's optional property like "skip", but the value contains a command (for
example, a probe on iproute2 to check if it supports a specific feature).
If such property is present, tdc executes that command and skips the test
when the return value is non-zero.
Reviewed-by: Pedro Tammela <[email protected]>
Signed-off-by: Davide Caratti <[email protected]>
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
This selftest was introduced recently in the commit cited below. It misses
several check_err() invocations to actually verify that the previous
command succeeded. When these are added, the first one fails, because
besides the addresses added by hand, there can be a link-local address
added by the kernel. Adjust the check to expect at least three addresses
instead of exactly three, and add the missing check_err's.
Furthermore, the explanatory comments assume that the address with no
protocol is $addr2, when in fact it is $addr3. Update the comments.
Fixes: 6a414fd77f61 ("selftests: rtnetlink: Add an address proto test")
Signed-off-by: Petr Machata <[email protected]>
Reviewed-by: Ido Schimmel <[email protected]>
Link: https://lore.kernel.org/r/53a579bc883e1bf2fe490d58427cf22c2d1aa21f.1680102695.git.petrm@nvidia.com
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
Conflicts:
drivers/net/ethernet/mediatek/mtk_ppe.c
3fbe4d8c0e53 ("net: ethernet: mtk_eth_soc: ppe: add support for flow accounting")
924531326e2d ("net: ethernet: mtk_eth_soc: add missing ppe cache flush when deleting a flow")
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
The second argument of the bpf_kptr_xchg() helper function is
ARG_PTR_TO_BTF_ID_OR_NULL. A recent patch fixed a bug whereby the
verifier would fail with an internal error message if a program invoked
the helper with a PTR_TO_BTF_ID | PTR_MAYBE_NULL register. This testcase
adds some testcases to ensure that it fails gracefully moving forward.
Before the fix, these testcases would have failed an error resembling
the following:
; p = bpf_kfunc_call_test_acquire(&(unsigned long){0});
99: (7b) *(u64 *)(r10 -16) = r7 ; frame1: ...
100: (bf) r1 = r10 ; frame1: ...
101: (07) r1 += -16 ; frame1: ...
; p = bpf_kfunc_call_test_acquire(&(unsigned long){0});
102: (85) call bpf_kfunc_call_test_acquire#13908
; frame1: R0_w=ptr_or_null_prog_test_ref_kfunc...
; p = bpf_kptr_xchg(&v->ref_ptr, p);
103: (bf) r1 = r6 ; frame1: ...
104: (bf) r2 = r0
; frame1: R0_w=ptr_or_null_prog_test_ref_kfunc...
105: (85) call bpf_kptr_xchg#194
verifier internal error: invalid PTR_TO_BTF_ID register for type match
Signed-off-by: David Vernet <[email protected]>
Signed-off-by: Andrii Nakryiko <[email protected]>
Link: https://lore.kernel.org/bpf/[email protected]
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Including fixes from CAN and WPAN.
Still quite a few bugs from this release. This pull is a bit smaller
because major subtrees went into the previous one. Or maybe people
took spring break off?
Current release - regressions:
- phy: micrel: correct KSZ9131RNX EEE capabilities and advertisement
Current release - new code bugs:
- eth: wangxun: fix vector length of interrupt cause
- vsock/loopback: consistently protect the packet queue with
sk_buff_head.lock
- virtio/vsock: fix header length on skb merging
- wpan: ca8210: fix unsigned mac_len comparison with zero
Previous releases - regressions:
- eth: stmmac: don't reject VLANs when IFF_PROMISC is set
- eth: smsc911x: avoid PHY being resumed when interface is not up
- eth: mtk_eth_soc: fix tx throughput regression with direct 1G links
- eth: bnx2x: use the right build_skb() helper after core rework
- wwan: iosm: fix 7560 modem crash on use on unsupported channel
Previous releases - always broken:
- eth: sfc: don't overwrite offload features at NIC reset
- eth: r8169: fix RTL8168H and RTL8107E rx crc error
- can: j1939: prevent deadlock by moving j1939_sk_errqueue()
- virt: vmxnet3: use GRO callback when UPT is enabled
- virt: xen: don't do grant copy across page boundary
- phy: dp83869: fix default value for tx-/rx-internal-delay
- dsa: ksz8: fix multiple issues with ksz8_fdb_dump
- eth: mvpp2: fix classification/RSS of VLAN and fragmented packets
- eth: mtk_eth_soc: fix flow block refcounting logic
Misc:
- constify fwnode pointers in SFP handling"
* tag 'net-6.3-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (55 commits)
net: ethernet: mtk_eth_soc: add missing ppe cache flush when deleting a flow
net: ethernet: mtk_eth_soc: fix L2 offloading with DSA untag offload
net: ethernet: mtk_eth_soc: fix flow block refcounting logic
net: mvneta: fix potential double-frees in mvneta_txq_sw_deinit()
net: dsa: sync unicast and multicast addresses for VLAN filters too
net: dsa: mv88e6xxx: Enable IGMP snooping on user ports only
xen/netback: use same error messages for same errors
test/vsock: new skbuff appending test
virtio/vsock: WARN_ONCE() for invalid state of socket
virtio/vsock: fix header length on skb merging
bnxt_en: Add missing 200G link speed reporting
bnxt_en: Fix typo in PCI id to device description string mapping
bnxt_en: Fix reporting of test result in ethtool selftest
i40e: fix registers dump after run ethtool adapter self test
bnx2x: use the right build_skb() helper
net: ipa: compute DMA pool size properly
net: wwan: iosm: fixes 7560 modem crash
net: ethernet: mtk_eth_soc: fix tx throughput regression with direct 1G links
ice: fix invalid check for empty list in ice_sched_assoc_vsi_to_agg()
ice: add profile conflict check for AVF FDIR
...
|
|
SCHED_CLS seems to be a better option as a default guess for freplace
programs that have __sk_buff as a context type.
Reported-by: Eduard Zingerman <[email protected]>
Signed-off-by: Andrii Nakryiko <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Martin KaFai Lau <[email protected]>
|
|
Move the x86 documentation under Documentation/arch/ as a way of cleaning
up the top-level directory and making the structure of our docs more
closely match the structure of the source directories it describes.
All in-kernel references to the old paths have been updated.
Acked-by: Dave Hansen <[email protected]>
Cc: [email protected]
Cc: [email protected]
Cc: Borislav Petkov <[email protected]>
Cc: Thomas Gleixner <[email protected]>
Link: https://lore.kernel.org/lkml/[email protected]/
Signed-off-by: Jonathan Corbet <[email protected]>
|
|
All otherwise unspecified aarch64 ID registers should be read as zero so
we cover the whole ID register space in the get-reg-list test but we've
added comments for those that have been named. Add comments for
ID_AA64PFR2_EL1, ID_AA64SMFR0_EL1, ID_AA64ISAR2_EL1, ID_AA64MMFR3_EL1
and ID_AA64MMFR4_EL1 which have been defined since the comments were
added so someone looking for them will see that they are covered.
Signed-off-by: Mark Brown <[email protected]>
Signed-off-by: Marc Zyngier <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
|
|
Bits [51:48] of the pgd address are stored at bits [5:2] of ttbr0_el1.
page_table_test stores its page tables at the far end of IPA space so
was tripping over this when run on a system that supports FEAT_LPA (or
FEAT_LPA2).
Signed-off-by: Ryan Roberts <[email protected]>
Reviewed-by: Oliver Upton <[email protected]>
Signed-off-by: Marc Zyngier <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
|
|
The high bits [51:48] of a physical address should appear at [15:12] in
a 64K pte, not at [51:48] as was previously being programmed. Fix this
with new helper functions that do the conversion correctly. This also
sets us up nicely for adding LPA2 encodings in future.
Fixes: 7a6629ef746d ("kvm: selftests: add virt mem support for aarch64")
Signed-off-by: Ryan Roberts <[email protected]>
Reviewed-by: Oliver Upton <[email protected]>
Signed-off-by: Marc Zyngier <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
|
|
access_tracking_perf_test requires CONFIG_IDLE_PAGE_TRACKING. However
this is missing from the config fragment, so add it in so that this test
is no longer skipped.
Signed-off-by: Ryan Roberts <[email protected]>
Reviewed-by: Sean Christopherson <[email protected]>
Reviewed-by: Oliver Upton <[email protected]>
Signed-off-by: Marc Zyngier <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
|
|
Allow a user to specify the global offset on the command-line.
Reviewed-by: Colton Lewis <[email protected]>
Signed-off-by: Marc Zyngier <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
|
|
Make sure the timer test can properly handle a spurious timer
interrupt, something that is far from being unlikely.
This involves checking for the GIC IAR return value (don't bother
handling the interrupt if it was spurious) as well as the timer
control register (don't do anything if the interrupt is masked
or the timer disabled). Take this opportunity to rewrite the
timer handler in a more readable way.
This solves a bunch of failures that creep up on systems that
are slow to retire the interrupt, something that the GIC architecture
makes no guarantee about.
Reviewed-by: Colton Lewis <[email protected]>
Signed-off-by: Marc Zyngier <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
|
|
Now that KVM exposes CNTPCT_EL0, CNTP_CTL_EL0 and CNT_CVAL_EL0 to
userspace, add them to the get-reg-list selftest.
Reviewed-by: Colton Lewis <[email protected]>
Signed-off-by: Marc Zyngier <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
|
|
dd logs info to stderr by default. This info is pointless in the
selftests and makes legitimate issues harder to spot.
Pass the option to silence the info logs. Actual errors would still be
printed.
Signed-off-by: Benjamin Gray <[email protected]>
Signed-off-by: Michael Ellerman <[email protected]>
Link: https://msgid.link/[email protected]
|
|
Make supports passing the 'jobserver' (parallel make support) to child
invocations of make when either
1. The target command uses $(MAKE) directly
2. The command starts with '+'
This context is not passed through expansions that result in $(MAKE), so
the macros used in several places fail to pass on the jobserver context.
Warnings are also raised by the child mentioning this.
Prepend macros lines that invoke $(MAKE) with '+' to allow passing the
jobserver context to these children.
Signed-off-by: Benjamin Gray <[email protected]>
Signed-off-by: Michael Ellerman <[email protected]>
Link: https://msgid.link/[email protected]
|
|
The CLEAN macro was added in 337f1e36 to prevent the
Makefile:50: warning: overriding recipe for target 'clean'
../../lib.mk:124: warning: ignoring old recipe for target 'clean'
style warnings. Expand it's use to fix another case of redefining a
target directly.
Signed-off-by: Benjamin Gray <[email protected]>
Signed-off-by: Michael Ellerman <[email protected]>
Link: https://msgid.link/[email protected]
|
|
This adds test which checks case when data of newly received skbuff is
appended to the last skbuff in the socket's queue. It looks like simple
test with 'send()' and 'recv()', but internally it triggers logic which
appends one received skbuff to another. Test checks that this feature
works correctly.
This test is actual only for virtio transport.
Signed-off-by: Arseniy Krasnov <[email protected]>
Reviewed-by: Stefano Garzarella <[email protected]>
Signed-off-by: Paolo Abeni <[email protected]>
|
|
The two infinite loops in bound check cases added by commit
1a3148fc171f ("selftests/bpf: Check when bounds are not in the 32-bit range")
increased the execution time of test_verifier from about 6 seconds to
about 9 seconds. Rewrite these two infinite loops to finite loops to get
rid of this extra time cost.
Signed-off-by: Xu Kuohai <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Alexei Starovoitov <[email protected]>
|
|
SEC("freplace") (i.e., BPF_PROG_TYPE_EXT) programs are not loadable as
is through veristat, as kernel expects actual program's FD during
BPF_PROG_LOAD time, which veristat has no way of knowing.
Unfortunately, freplace programs are a pretty important class of
programs, especially when dealing with XDP chaining solutions, which
rely on EXT programs.
So let's do our best and teach veristat to try to guess the original
program type, based on program's context argument type. And if guessing
process succeeds, we manually override freplace/EXT with guessed program
type using bpf_program__set_type() setter to increase chances of proper
BPF verification.
We rely on BTF and maintain a simple lookup table. This process is
obviously not 100% bulletproof, as valid program might not use context
and thus wouldn't have to specify correct type. Also, __sk_buff is very
ambiguous and is the context type across many different program types.
We pick BPF_PROG_TYPE_CGROUP_SKB for now, which seems to work fine in
practice so far. Similarly, some program types require specifying attach
type, and so we pick one out of possible few variants.
Best effort at its best. But this makes veristat even more widely
applicable.
Signed-off-by: Andrii Nakryiko <[email protected]>
Tested-by: Eduard Zingerman <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Alexei Starovoitov <[email protected]>
|
|
Add -d option to allow requesting libbpf debug logs from veristat.
Signed-off-by: Andrii Nakryiko <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Alexei Starovoitov <[email protected]>
|
|
If user explicitly overrides programs's type with
bpf_program__set_type() API call, we need to disassociate whatever
SEC_DEF handler libbpf determined initially based on program's SEC()
definition, as it's not goind to be valid anymore and could lead to
crashes and/or confusing failures.
Also, fix up bpf_prog_test_load() helper in selftests/bpf, which is
force-setting program type (even if that's completely unnecessary; this
is quite a legacy piece of code), and thus should expect auto-attach to
not work, yet one of the tests explicitly relies on auto-attach for
testing.
Instead, force-set program type only if it differs from the desired one.
Signed-off-by: Andrii Nakryiko <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Alexei Starovoitov <[email protected]>
|
|
Test whether a TCP CC implemented in BPF is allowed to write
app_limited in struct tcp_sock. This is already allowed for
the built-in TCP CC.
Signed-off-by: Yixin Shen <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Martin KaFai Lau <[email protected]>
|
|
This patch makes the following minor updates to the cpuset partition
testing script test_cpuset_prs.sh.
- Remove online_cpus function call as it will be called anyway on exit
in cleanup.
- Make the enabling of sched/verbose debugfs flag conditional on the
"-v" verbose option and set DELAY_FACTOR to 2 in this case as cpuset
partition operations are likely to be slowed down by enabling that.
Signed-off-by: Waiman Long <[email protected]>
Signed-off-by: Tejun Heo <[email protected]>
|
|
This is essentially a backport of iproute2's
commit ed54f76484b5 ("json: fix backslash escape typo in jsonw_puts")
Also added the stdio.h include in json_writer.h to be able to compile
and run the json_writer test as used below).
Before this fix:
$ gcc -D notused -D TEST -I../../include -o json_writer json_writer.c
json_writer.h
$ ./json_writer
{
"Vyatta": {
"url": "http://vyatta.com",
"downloads": 2000000,
"stock": 8.16,
"ARGV": [],
"empty": [],
"NIL": {},
"my_null": null,
"special chars": [
"slash": "/",
"newline": "\n",
"tab": "\t",
"ff": "\f",
"quote": "\"",
"tick": "'",
"backslash": "\n"
]
}
}
After:
$ gcc -D notused -D TEST -I../../include -o json_writer json_writer.c
json_writer.h
$ ./json_writer
{
"Vyatta": {
"url": "http://vyatta.com",
"downloads": 2000000,
"stock": 8.16,
"ARGV": [],
"empty": [],
"NIL": {},
"my_null": null,
"special chars": [
"slash": "/",
"newline": "\n",
"tab": "\t",
"ff": "\f",
"quote": "\"",
"tick": "'",
"backslash": "\\"
]
}
}
Signed-off-by: Manu Bretelle <[email protected]>
Signed-off-by: Andrii Nakryiko <[email protected]>
Reviewed-by: Quentin Monnet <[email protected]>
Link: https://lore.kernel.org/bpf/[email protected]
|
|
Add ABI specific self-test to ensure enablements work in various
scenarios such as fork, VM_CLONE, and basic event enable/disable.
Ensure ABI contracts/limits are also being upheld, such as bit limits
and data size limits.
Link: https://lkml.kernel.org/r/[email protected]
Signed-off-by: Beau Belgrave <[email protected]>
Signed-off-by: Steven Rostedt (Google) <[email protected]>
|
|
ABI has been changed to remote writes, update existing test cases to use
this new ABI to ensure existing functionality continues to work.
Link: https://lkml.kernel.org/r/[email protected]
Signed-off-by: Beau Belgrave <[email protected]>
Signed-off-by: Steven Rostedt (Google) <[email protected]>
|