| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
ACPICA commit 25bddd1824b1e450829468a64bbdcb38074ba3d2
Copyright updates to 2023.
Link: https://github.com/acpica/acpica/commit/25bddd18
Signed-off-by: Bob Moore <[email protected]>
Signed-off-by: Rafael J. Wysocki <[email protected]>
|
|
Add unaligned descriptor test for frame size of 4001. Using an odd frame
size ensures that the end of the UMEM is not near a page boundary. This
allows testing descriptors that staddle the end of the UMEM but not a
page.
This test used to fail without the previous commit ("xsk: Fix unaligned
descriptor validation").
Signed-off-by: Kal Conley <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Martin KaFai Lau <[email protected]>
|
|
xdp-features supported by veth driver are no more static, but they
depends on veth configuration (e.g. if GRO is enabled/disabled or
TX/RX queue configuration). Take it into account in xdp_redirect
xdp-features selftest for veth driver.
Fixes: fccca038f300 ("veth: take into account device reconfiguration for xdp_features flag")
Signed-off-by: Lorenzo Bianconi <[email protected]>
Link: https://lore.kernel.org/r/bc35455cfbb1d4f7f52536955ded81ad47d8dc54.1680777371.git.lorenzo@kernel.org
Signed-off-by: Martin KaFai Lau <[email protected]>
|
|
kernel test robot reported the following warning:
All warnings (new ones prefixed by >>):
tcp_mmap.c: In function 'child_thread':
>> tcp_mmap.c:211:61: warning: 'lu' may be used uninitialized in this function [-Wmaybe-uninitialized]
211 | zc.length = min(chunk_size, FILE_SZ - lu);
We want to read FILE_SZ bytes, so the correct expression
should be (FILE_SZ - total)
Fixes: 5c5945dc695c ("selftests/net: Add SHA256 computation over data sent in tcp_mmap")
Reported-by: kernel test robot <[email protected]>
Link: https://lore.kernel.org/oe-kbuild-all/[email protected]/
Signed-off-by: Eric Dumazet <[email protected]>
Cc: Xiaoyan Li <[email protected]>
Cc: Kuniyuki Iwashima <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Paolo Abeni <[email protected]>
|
|
Commit 515bddf0ec41 ("selftests/clone3: test clone3 with CLONE_NEWTIME")
added an additional test, so the number passed to ksft_set_plan needs to
be bumped accordingly.
Also use ksft_finished() to print results and exit. This will catch future
mismatches between ksft_set_plan() and the number of tests being run.
Fixes: 515bddf0ec41 ("selftests/clone3: test clone3 with CLONE_NEWTIME")
Cc: Christian Brauner <[email protected]>
Signed-off-by: Tobias Klauser <[email protected]>
Reviewed-by: Christian Brauner <[email protected]>
Signed-off-by: Christian Brauner <[email protected]>
|
|
In bpftool's bash completion file, function _bpftool_once_attr() is able
to process multiple arguments. There are a few locations where this
function is called multiple times in a row, each time for a single
argument; let's pass all arguments instead to minimize the number of
function calls required for the completion.
Signed-off-by: Quentin Monnet <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Alexei Starovoitov <[email protected]>
|
|
Add support for displaying opcodes or/and file references (filepath,
line and column numbers) when dumping the control flow graphs of loaded
BPF programs with bpftool.
The filepaths in the records are absolute. To avoid blocks on the graph
to get too wide, we truncate them when they get too long (but we always
keep the entire file name). In the unlikely case where the resulting
file name is ambiguous, it remains possible to get the full path with a
regular dump (no CFG).
Signed-off-by: Quentin Monnet <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Alexei Starovoitov <[email protected]>
|
|
When dumping a program, the keywords "opcodes" (for printing the raw
opcodes), "linum" (for displaying the filename, line number, column
number along with the source code), and "visual" (for generating the
control flow graph for translated programs) are mutually exclusive. But
there's no reason why they should be. Let's make it possible to pass
several of them at once. The "file FILE" option, which makes bpftool
output a binary image to a file, remains incompatible with the others.
Signed-off-by: Quentin Monnet <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Alexei Starovoitov <[email protected]>
|
|
We do not support JSON output for control flow graphs of programs with
bpftool. So far, requiring both the CFG and JSON output would result in
producing a null JSON object. It makes more sense to raise an error
directly when parsing command line arguments and options, so that users
know they won't get any output they might expect.
If JSON is required for the graph, we leave it to Graphviz instead:
# bpftool prog dump xlated <REF> visual | dot -Tjson
Suggested-by: Eduard Zingerman <[email protected]>
Signed-off-by: Quentin Monnet <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Alexei Starovoitov <[email protected]>
|
|
We support dumping the control flow graph of loaded programs to the DOT
format with bpftool, but so far this feature wouldn't display the source
code lines available through BTF along with the eBPF bytecode. Let's add
support for these annotations, to make it easier to read the graph.
In prog.c, we move the call to dump_xlated_cfg() in order to pass and
use the full struct dump_data, instead of creating a minimal one in
draw_bb_node().
We pass the pointer to this struct down to dump_xlated_for_graph() in
xlated_dumper.c, where most of the logics is added. We deal with BTF
mostly like we do for plain or JSON output, except that we cannot use a
"nr_skip" value to skip a given number of linfo records (we don't
process the BPF instructions linearly, and apart from the root of the
graph we don't know how many records we should skip, so we just store
the last linfo and make sure the new one we find is different before
printing it).
When printing the source instructions to the label of a DOT graph node,
there are a few subtleties to address. We want some special newline
markers, and there are some characters that we must escape. To deal with
them, we introduce a new dedicated function btf_dump_linfo_dotlabel() in
btf_dumper.c. We'll reuse this function in a later commit to format the
filepath, line, and column references as well.
Signed-off-by: Quentin Monnet <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Alexei Starovoitov <[email protected]>
|
|
When dumping the control flow graphs for programs using the 16-byte long
load instruction, we need to skip the second part of this instruction
when looking for the next instruction to process. Otherwise, we end up
printing "BUG_ld_00" from the kernel disassembler in the CFG.
Fixes: efcef17a6d65 ("tools: bpftool: generate .dot graph from CFG information")
Signed-off-by: Quentin Monnet <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Alexei Starovoitov <[email protected]>
|
|
The documentation states that when line_info is available when dumping a
program, the source line will be displayed "by default". There is no
notion of "default" here: the line is always displayed if available,
there is no way currently to turn it off.
In the next sentence, the documentation states that if "linum" is used
on the command line, the relevant filename, line, and column will be
displayed "on top of the source line". This is incorrect, as they are
currently displayed on the right side of the source line (or on top of
the eBPF instruction, not the source).
This commit fixes the documentation to address these points.
Signed-off-by: Quentin Monnet <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Alexei Starovoitov <[email protected]>
|
|
The kernel's default behaviour is to obstruct the allocation of high
virtual address as it handles memory overcommit in a heuristic manner.
Setting the parameter as OVERCOMMIT_ALWAYS, ensures kernel isn't
susceptible to the availability of a platform's physical memory when
denying a memory allocation request.
Link: https://lkml.kernel.org/r/[email protected]
Signed-off-by: Chaitanya S Prakash <[email protected]>
Cc: David Hildenbrand <[email protected]>
Cc: Shuah Khan <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
|
|
Although there is a provision for 52 bit VA on arm64 platform, it remains
unutilised and higher addresses are not allocated. In order to
accommodate 4PB [2^52] virtual address space where supported,
NR_CHUNKS_HIGH is changed accordingly.
Array holding addresses is changed from static allocation to dynamic
allocation to accommodate its voluminous nature which otherwise might
overflow the stack.
Link: https://lkml.kernel.org/r/[email protected]
Signed-off-by: Chaitanya S Prakash <[email protected]>
Cc: David Hildenbrand <[email protected]>
Cc: Shuah Khan <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
|
|
Patch series "selftests: Fix virtual address range for arm64", v2.
When the virtual address range selftest is run on arm64 and x86 platforms,
it is observed that both the low and high VA range iterations are skipped
when the MAP_CHUNK_SIZE is set to 16GB. The MAP_CHUNK_SIZE is changed to
1GB to resolve this issue, following which support for arm64 platform is
added by changing the NR_CHUNKS_HIGH for aarch64 to accommodate up to 4PB
of virtual address space allocation requests. Dynamic memory allocation
of array holding addresses is introduced to prevent overflow of the stack.
Finally, the overcommit_policy is set as OVERCOMMIT_ALWAYS to prevent the
kernel from denying a memory allocation request based on a platform's
physical memory availability.
This patch (of 3):
mmap() fails to allocate 16GB virtual space chunk, skipping both low and
high VA range iterations. Hence, reduce MAP_CHUNK_SIZE to 1GB and update
relevant macros as required.
Link: https://lkml.kernel.org/r/[email protected]
Link: https://lkml.kernel.org/r/[email protected]
Signed-off-by: Chaitanya S Prakash <[email protected]>
Cc: David Hildenbrand <[email protected]>
Cc: Shuah Khan <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
|
|
UFFDIO_COPY already has UFFDIO_COPY_MODE_WP, so when installing a new PTE
to resolve a missing fault, one can install a write-protected one. This
is useful when using UFFDIO_REGISTER_MODE_{MISSING,WP} in combination.
This was motivated by testing HugeTLB HGM [1], and in particular its
interaction with userfaultfd features. Existing userfaultfd code supports
using WP and MINOR modes together (i.e. you can register an area with
both enabled), but without this CONTINUE flag the combination is in
practice unusable.
So, add an analogous UFFDIO_CONTINUE_MODE_WP, which does the same thing as
UFFDIO_COPY_MODE_WP, but for *minor* faults.
Update the selftest to do some very basic exercising of the new flag.
Update Documentation/ to describe how these flags are used (neither the
COPY nor the new CONTINUE versions of this mode flag were described there
before).
[1]: https://patchwork.kernel.org/project/linux-mm/cover/[email protected]/
Link: https://lkml.kernel.org/r/[email protected]
Signed-off-by: Axel Rasmussen <[email protected]>
Acked-by: Peter Xu <[email protected]>
Acked-by: Mike Rapoport (IBM) <[email protected]>
Cc: Al Viro <[email protected]>
Cc: Hugh Dickins <[email protected]>
Cc: Jan Kara <[email protected]>
Cc: Liam R. Howlett <[email protected]>
Cc: Matthew Wilcox (Oracle) <[email protected]>
Cc: Mike Kravetz <[email protected]>
Cc: Muchun Song <[email protected]>
Cc: Nadav Amit <[email protected]>
Cc: Shuah Khan <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
|
|
MAX_ORDER currently defined as number of orders page allocator supports:
user can ask buddy allocator for page order between 0 and MAX_ORDER-1.
This definition is counter-intuitive and lead to number of bugs all over
the kernel.
Change the definition of MAX_ORDER to be inclusive: the range of orders
user can ask from buddy allocator is 0..MAX_ORDER now.
[[email protected]: fix min() warning]
Link: https://lkml.kernel.org/r/20230315153800.32wib3n5rickolvh@box
[[email protected]: fix another min_t warning]
[[email protected]: fixups per Zi Yan]
Link: https://lkml.kernel.org/r/[email protected]
[[email protected]: fix underlining in docs]
Link: https://lore.kernel.org/oe-kbuild-all/[email protected]/
Link: https://lkml.kernel.org/r/[email protected]
Signed-off-by: Kirill A. Shutemov <[email protected]>
Reviewed-by: Michael Ellerman <[email protected]> [powerpc]
Cc: "Kirill A. Shutemov" <[email protected]>
Cc: Zi Yan <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
|
|
Enable it by default on the stress test, and add some smoke tests for the
pte markers on anonymous.
Link: https://lkml.kernel.org/r/[email protected]
Signed-off-by: Peter Xu <[email protected]>
Cc: Andrea Arcangeli <[email protected]>
Cc: Axel Rasmussen <[email protected]>
Cc: David Hildenbrand <[email protected]>
Cc: Mike Rapoport <[email protected]>
Cc: Muhammad Usama Anjum <[email protected]>
Cc: Nadav Amit <[email protected]>
Cc: Paul Gofman <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
|
|
When deleting the netns and recreating a new one while re-adding the
veth interface, there is a small window of time during which the old
veth interface has not yet been removed. This can cause the new addition
to fail. To resolve this issue, we can either wait for a short while to
ensure that the old veth interface is deleted, or we can specifically
remove the veth interface.
Before this patch:
# ./rps_default_mask.sh
empty rps_default_mask [ ok ]
changing rps_default_mask dont affect existing devices [ ok ]
changing rps_default_mask dont affect existing netns [ ok ]
changing rps_default_mask affect newly created devices [ ok ]
changing rps_default_mask don't affect newly child netns[II][ ok ]
rps_default_mask is 0 by default in child netns [ ok ]
RTNETLINK answers: File exists
changing rps_default_mask in child ns don't affect the main one[ ok ]
cat: /sys/class/net/vethC11an1/queues/rx-0/rps_cpus: No such file or directory
changing rps_default_mask in child ns affects new childns devices./rps_default_mask.sh: line 36: [: -eq: unary operator expected
[fail] expected 1 found
changing rps_default_mask in child ns don't affect existing devices[ ok ]
After this patch:
# ./rps_default_mask.sh
empty rps_default_mask [ ok ]
changing rps_default_mask dont affect existing devices [ ok ]
changing rps_default_mask dont affect existing netns [ ok ]
changing rps_default_mask affect newly created devices [ ok ]
changing rps_default_mask don't affect newly child netns[II][ ok ]
rps_default_mask is 0 by default in child netns [ ok ]
changing rps_default_mask in child ns don't affect the main one[ ok ]
changing rps_default_mask in child ns affects new childns devices[ ok ]
changing rps_default_mask in child ns don't affect existing devices[ ok ]
Fixes: 3a7d84eae03b ("self-tests: more rps self tests")
Signed-off-by: Hangbin Liu <[email protected]>
Acked-by: Paolo Abeni <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
During the development of the maple tree, the strategy of freeing multiple
nodes changed and, in the process, the pivots were reused to store
pointers to dead nodes. To ensure the readers see accurate pivots, the
writers need to mark the nodes as dead and call smp_wmb() to ensure any
readers can identify the node as dead before using the pivot values.
There were two places where the old method of marking the node as dead
without smp_wmb() were being used, which resulted in RCU readers seeing
the wrong pivot value before seeing the node was dead. Fix this race
condition by using mte_set_node_dead() which has the smp_wmb() call to
ensure the race is closed.
Add a WARN_ON() to the ma_free_rcu() call to ensure all nodes being freed
are marked as dead to ensure there are no other call paths besides the two
updated paths.
This is necessary for the RCU mode of the maple tree.
Link: https://lkml.kernel.org/r/[email protected]
Fixes: 54a611b60590 ("Maple Tree: add new data structure")
Signed-off-by: Liam R. Howlett <[email protected]>
Signed-off-by: Suren Baghdasaryan <[email protected]>
Cc: <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
|
|
Close the "current_clocksource" file descriptor before returning or exiting
from stable_tsc_check_supported() in vmx_nested_tsc_scaling_test.
Signed-off-by: Hao Ge <[email protected]>
Reviewed-by: Vipin Sharma <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Sean Christopherson <[email protected]>
|
|
In some cases the loopback latency might be large enough, causing
the assertion on invocations to be run before ingress prog getting
executed. The assertion would fail and the test would flake.
This can be reliably reproduced by arbitrarily increasing the
loopback latency (thanks to [1]):
tc qdisc add dev lo root handle 1: htb default 12
tc class add dev lo parent 1:1 classid 1:12 htb rate 20kbps ceil 20kbps
tc qdisc add dev lo parent 1:12 netem delay 100ms
Fix this by waiting on the receive end, instead of instantly
returning to the assert. The call to read() will wait for the
default SO_RCVTIMEO timeout of 3 seconds provided by
start_server().
[1] https://gist.github.com/kstevens715/4598301
Reported-by: Martin KaFai Lau <[email protected]>
Link: https://lore.kernel.org/bpf/[email protected]/
Fixes: 3573f384014f ("selftests/bpf: Test CGROUP_STORAGE behavior on shared egress + ingress")
Acked-by: Stanislav Fomichev <[email protected]>
Signed-off-by: YiFei Zhu <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Martin KaFai Lau <[email protected]>
|
|
Fix flaky STATS_RX_DROPPED test. The receiver calls getsockopt after
receiving the last (valid) packet which is not the final packet sent in
the test (valid and invalid packets are sent in alternating fashion with
the final packet being invalid). Since the last packet may or may not
have been dropped already, both outcomes must be allowed.
This issue could also be fixed by making sure the last packet sent is
valid. This alternative is left as an exercise to the reader (or the
benevolent maintainers of this file).
This problem was quite visible on certain setups. On one machine this
failure was observed 50% of the time.
Also, remove a redundant assignment of pkt_stream->nb_pkts. This field
is already initialized by __pkt_stream_alloc.
Fixes: 27e934bec35b ("selftests: xsk: make stat tests not spin on getsockopt")
Signed-off-by: Kal Conley <[email protected]>
Acked-by: Magnus Karlsson <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Martin KaFai Lau <[email protected]>
|
|
This change fixes flakiness in the BIDIRECTIONAL test:
# [is_pkt_valid] expected length [60], got length [90]
not ok 1 FAIL: SKB BUSY-POLL BIDIRECTIONAL
When IPv6 is enabled, the interface will periodically send MLDv1 and
MLDv2 packets. These packets can cause the BIDIRECTIONAL test to fail
since it uses VETH0 for RX.
For other tests, this was not a problem since they only receive on VETH1
and IPv6 was already disabled on VETH0.
Fixes: a89052572ebb ("selftests/bpf: Xsk selftests framework")
Signed-off-by: Kal Conley <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Martin KaFai Lau <[email protected]>
|
|
Add basic support to run SH under QEMU via kunit_tool using the
virtualized r2d platform.
Signed-off-by: Geert Uytterhoeven <[email protected]>
Reviewed-by: David Gow <[email protected]>
Signed-off-by: Shuah Khan <[email protected]>
|
|
On some platforms, the console is not the first serial port. To make
this work, the first serial port in QEMU must be set to "null".
Add support for this by adding an optional "serial" parameter, which
defaults to "stdio", and can be overridden by platform-specific
configuration.
Signed-off-by: Geert Uytterhoeven <[email protected]>
Reviewed-by: David Gow <[email protected]>
Signed-off-by: Shuah Khan <[email protected]>
|
|
Add test case to testapp_invalid_desc for valid packets at the end of
the UMEM.
Signed-off-by: Kal Conley <[email protected]>
Acked-by: Magnus Karlsson <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Martin KaFai Lau <[email protected]>
|
|
Avoid UMEM_SIZE macro in testapp_invalid_desc which is incorrect when
the frame size is not XSK_UMEM__DEFAULT_FRAME_SIZE. Also remove the
macro since it's no longer being used.
Fixes: 909f0e28207c ("selftests: xsk: Add tests for 2K frame size")
Signed-off-by: Kal Conley <[email protected]>
Acked-by: Magnus Karlsson <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Martin KaFai Lau <[email protected]>
|
|
xskxceiver depends on xskxceiver.h so tell make about it.
Signed-off-by: Kal Conley <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Martin KaFai Lau <[email protected]>
|
|
'rcu/staging-kfree', remote-tracking branches 'paul/srcu-cf.2023.04.04a', 'fbq/rcu/lockdep.2023.03.27a' and 'fbq/rcu/rcutorture.2023.03.20a' into rcu/staging
|
|
Now that all references to CONFIG_SRCU have been removed, it is time to
remove CONFIG_SRCU itself.
Signed-off-by: Paul E. McKenney <[email protected]>
Cc: John Ogness <[email protected]>
Cc: Petr Mladek <[email protected]>
Reviewed-by: John Ogness <[email protected]>
Signed-off-by: Joel Fernandes (Google) <[email protected]>
|
|
Add a selftest for the SMCCC filter, ensuring basic UAPI constraints
(e.g. reserved ranges, non-overlapping ranges) are upheld. Additionally,
test that the DENIED and FWD_TO_USER work as intended.
Signed-off-by: Oliver Upton <[email protected]>
Signed-off-by: Marc Zyngier <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
|
|
Build a helper for doing SMCs in selftests by macro-izing the current
HVC implementation and taking the conduit instruction as an argument.
Signed-off-by: Oliver Upton <[email protected]>
Signed-off-by: Marc Zyngier <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
|
|
Add tracing tests for walking skb->sk and req->sk.
Signed-off-by: Alexei Starovoitov <[email protected]>
Signed-off-by: Andrii Nakryiko <[email protected]>
Acked-by: David Vernet <[email protected]>
Link: https://lore.kernel.org/bpf/[email protected]
|
|
bpf_testmod.ko sometimes fails to build from a clean checkout:
BTF [M] linux/tools/testing/selftests/bpf/bpf_testmod/bpf_testmod.ko
/bin/sh: 1: linux-build//tools/build/resolve_btfids/resolve_btfids: not found
The reason is that RESOLVE_BTFIDS may not yet be built. Fix by adding a
dependency.
Signed-off-by: Ilya Leoshkevich <[email protected]>
Signed-off-by: Andrii Nakryiko <[email protected]>
Acked-by: Jiri Olsa <[email protected]>
Link: https://lore.kernel.org/bpf/[email protected]
|
|
Later changes will add reference count checking for struct map, start
and end are frequently accessed variables. Add an accessor so that the
reference count check is only necessary in one place.
Signed-off-by: Ian Rogers <[email protected]>
Cc: Adrian Hunter <[email protected]>
Cc: Alexander Shishkin <[email protected]>
Cc: Alexey Bayduraev <[email protected]>
Cc: Andi Kleen <[email protected]>
Cc: Andrew Morton <[email protected]>
Cc: Andy Shevchenko <[email protected]>
Cc: Darren Hart <[email protected]>
Cc: Davidlohr Bueso <[email protected]>
Cc: Dmitriy Vyukov <[email protected]>
Cc: Eric Dumazet <[email protected]>
Cc: German Gomez <[email protected]>
Cc: Hao Luo <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: James Clark <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: John Garry <[email protected]>
Cc: Kajol Jain <[email protected]>
Cc: Kan Liang <[email protected]>
Cc: Leo Yan <[email protected]>
Cc: Madhavan Srinivasan <[email protected]>
Cc: Mark Rutland <[email protected]>
Cc: Masami Hiramatsu <[email protected]>
Cc: Miaoqian Lin <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Riccardo Mancini <[email protected]>
Cc: Shunsuke Nakamura <[email protected]>
Cc: Song Liu <[email protected]>
Cc: Stephane Eranian <[email protected]>
Cc: Stephen Brennan <[email protected]>
Cc: Steven Rostedt (VMware) <[email protected]>
Cc: Thomas Gleixner <[email protected]>
Cc: Thomas Richter <[email protected]>
Cc: Yury Norov <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
Later changes will add reference count checking for struct map, with
dso being the most frequently accessed variable. Add an accessor so
that the reference count check is only necessary in one place.
Additional changes:
- add a dso variable to avoid repeated map__dso calls.
- in builtin-mem.c dump_raw_samples, code only partially tested for
dso == NULL. Make the possibility of NULL consistent.
- in thread.c thread__memcpy fix use of spaces and use tabs.
Committer notes:
Did missing conversions on these files:
tools/perf/arch/powerpc/util/skip-callchain-idx.c
tools/perf/arch/powerpc/util/sym-handling.c
tools/perf/ui/browsers/hists.c
tools/perf/ui/gtk/annotate.c
tools/perf/util/cs-etm.c
tools/perf/util/thread.c
tools/perf/util/unwind-libunwind-local.c
tools/perf/util/unwind-libunwind.c
Signed-off-by: Ian Rogers <[email protected]>
Cc: Adrian Hunter <[email protected]>
Cc: Alexander Shishkin <[email protected]>
Cc: Alexey Bayduraev <[email protected]>
Cc: Andi Kleen <[email protected]>
Cc: Andrew Morton <[email protected]>
Cc: Andy Shevchenko <[email protected]>
Cc: Darren Hart <[email protected]>
Cc: Davidlohr Bueso <[email protected]>
Cc: Dmitriy Vyukov <[email protected]>
Cc: Eric Dumazet <[email protected]>
Cc: German Gomez <[email protected]>
Cc: Hao Luo <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: James Clark <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: John Garry <[email protected]>
Cc: Kajol Jain <[email protected]>
Cc: Kan Liang <[email protected]>
Cc: Leo Yan <[email protected]>
Cc: Madhavan Srinivasan <[email protected]>
Cc: Mark Rutland <[email protected]>
Cc: Masami Hiramatsu <[email protected]>
Cc: Miaoqian Lin <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Riccardo Mancini <[email protected]>
Cc: Shunsuke Nakamura <[email protected]>
Cc: Song Liu <[email protected]>
Cc: Stephane Eranian <[email protected]>
Cc: Stephen Brennan <[email protected]>
Cc: Steven Rostedt (VMware) <[email protected]>
Cc: Thomas Gleixner <[email protected]>
Cc: Thomas Richter <[email protected]>
Cc: Yury Norov <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
Introduce functions to access struct maps. These functions reduce the
number of places reference counting is necessary. While tidying APIs do
some small const-ification, in particlar to unwind_libunwind_ops.
Committer notes:
Fixed up tools/perf/util/unwind-libunwind.c:
- return ops->get_entries(cb, arg, thread, data, max_stack);
+ return ops->get_entries(cb, arg, thread, data, max_stack, best_effort);
Signed-off-by: Ian Rogers <[email protected]>
Cc: Adrian Hunter <[email protected]>
Cc: Alexander Shishkin <[email protected]>
Cc: Alexey Bayduraev <[email protected]>
Cc: Andi Kleen <[email protected]>
Cc: Andrew Morton <[email protected]>
Cc: Andy Shevchenko <[email protected]>
Cc: Darren Hart <[email protected]>
Cc: Davidlohr Bueso <[email protected]>
Cc: Dmitriy Vyukov <[email protected]>
Cc: Eric Dumazet <[email protected]>
Cc: German Gomez <[email protected]>
Cc: Hao Luo <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: James Clark <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: John Garry <[email protected]>
Cc: Kajol Jain <[email protected]>
Cc: Kan Liang <[email protected]>
Cc: Leo Yan <[email protected]>
Cc: Madhavan Srinivasan <[email protected]>
Cc: Mark Rutland <[email protected]>
Cc: Masami Hiramatsu <[email protected]>
Cc: Miaoqian Lin <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Riccardo Mancini <[email protected]>
Cc: Shunsuke Nakamura <[email protected]>
Cc: Song Liu <[email protected]>
Cc: Stephane Eranian <[email protected]>
Cc: Stephen Brennan <[email protected]>
Cc: Steven Rostedt (VMware) <[email protected]>
Cc: Thomas Gleixner <[email protected]>
Cc: Thomas Richter <[email protected]>
Cc: Yury Norov <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
struct map is reference counted, having it also be a node in an
red-black tree complicates the reference counting. Switch to having a
map_rb_node which is a red-block tree node but points at the reference
counted struct map. This reference is responsible for a single reference
count.
Committer notes:
Fixed up tools/perf/util/unwind-libunwind-local.c to use map_rb_node as
well.
Signed-off-by: Ian Rogers <[email protected]>
Cc: Adrian Hunter <[email protected]>
Cc: Alexander Shishkin <[email protected]>
Cc: Alexey Bayduraev <[email protected]>
Cc: Andi Kleen <[email protected]>
Cc: Andrew Morton <[email protected]>
Cc: Andy Shevchenko <[email protected]>
Cc: Darren Hart <[email protected]>
Cc: Davidlohr Bueso <[email protected]>
Cc: Dmitriy Vyukov <[email protected]>
Cc: Eric Dumazet <[email protected]>
Cc: German Gomez <[email protected]>
Cc: Hao Luo <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: James Clark <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: John Garry <[email protected]>
Cc: Kajol Jain <[email protected]>
Cc: Kan Liang <[email protected]>
Cc: Leo Yan <[email protected]>
Cc: Madhavan Srinivasan <[email protected]>
Cc: Mark Rutland <[email protected]>
Cc: Masami Hiramatsu <[email protected]>
Cc: Miaoqian Lin <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Riccardo Mancini <[email protected]>
Cc: Shunsuke Nakamura <[email protected]>
Cc: Song Liu <[email protected]>
Cc: Stephane Eranian <[email protected]>
Cc: Stephen Brennan <[email protected]>
Cc: Steven Rostedt (VMware) <[email protected]>
Cc: Thomas Gleixner <[email protected]>
Cc: Thomas Richter <[email protected]>
Cc: Yury Norov <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
Using a perf map as a list node is only done in symbol. Move the
list_node struct into symbol as a single pointer to the map. This makes
reference count behavior more obvious and easy to check.
Committer notes:
Some changes to reduce the number of lines touched by keeping, for
instance, the 'new_map' variable and setting it to new_node->map, so
that we keep more of the project history in place and keep as much
as possible the value of the 'git blame' tool.
Also use map__zput() when putting a struct members, so that when we free
the container struct we can get use-after-free errors as NULL pointer
derefs sometimes.
Signed-off-by: Ian Rogers <[email protected]>
Cc: Adrian Hunter <[email protected]>
Cc: Alexander Shishkin <[email protected]>
Cc: Alexey Bayduraev <[email protected]>
Cc: Andi Kleen <[email protected]>
Cc: Andrew Morton <[email protected]>
Cc: Andy Shevchenko <[email protected]>
Cc: Darren Hart <[email protected]>
Cc: Davidlohr Bueso <[email protected]>
Cc: Dmitriy Vyukov <[email protected]>
Cc: Eric Dumazet <[email protected]>
Cc: German Gomez <[email protected]>
Cc: Hao Luo <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: James Clark <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: John Garry <[email protected]>
Cc: Kajol Jain <[email protected]>
Cc: Kan Liang <[email protected]>
Cc: Leo Yan <[email protected]>
Cc: Madhavan Srinivasan <[email protected]>
Cc: Mark Rutland <[email protected]>
Cc: Masami Hiramatsu <[email protected]>
Cc: Miaoqian Lin <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Riccardo Mancini <[email protected]>
Cc: Shunsuke Nakamura <[email protected]>
Cc: Song Liu <[email protected]>
Cc: Stephane Eranian <[email protected]>
Cc: Stephen Brennan <[email protected]>
Cc: Steven Rostedt (VMware) <[email protected]>
Cc: Thomas Gleixner <[email protected]>
Cc: Thomas Richter <[email protected]>
Cc: Yury Norov <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
As reported by leak sanitizer.
Signed-off-by: Ian Rogers <[email protected]>
Cc: Adrian Hunter <[email protected]>
Cc: Alexander Shishkin <[email protected]>
Cc: Brian Robbins <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Mark Rutland <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Yuan Can <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
The cxa demangle support isn't dependent on libelf and so we no longer
need to disable demangling if libelf isn't present.
Signed-off-by: Ian Rogers <[email protected]>
Cc: Adrian Hunter <[email protected]>
Cc: Alexander Shishkin <[email protected]>
Cc: Andrii Nakryiko <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Mark Rutland <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
Ignore SIGPIPEs when addr2line is configured.
Signed-off-by: Ian Rogers <[email protected]>
Acked-by: Namhyung Kim <[email protected]>
Cc: Adrian Hunter <[email protected]>
Cc: Alexander Shishkin <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Mark Rutland <[email protected]>
Cc: Nathan Chancellor <[email protected]>
Cc: Nick Desaulniers <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Tom Rix <[email protected]>
Cc: [email protected]
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
The sentinel value differs for llvm-addr2line. Configure this once and
then detect when reading records.
Signed-off-by: Ian Rogers <[email protected]>
Acked-by: Namhyung Kim <[email protected]>
Cc: Adrian Hunter <[email protected]>
Cc: Alexander Shishkin <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Mark Rutland <[email protected]>
Cc: Nathan Chancellor <[email protected]>
Cc: Nick Desaulniers <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Tom Rix <[email protected]>
Cc: [email protected]
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
Don't wrap stdin and stdout of subprocess with streams, use the api/io
library for buffering.
Signed-off-by: Ian Rogers <[email protected]>
Acked-by: Namhyung Kim <[email protected]>
Cc: Adrian Hunter <[email protected]>
Cc: Alexander Shishkin <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Mark Rutland <[email protected]>
Cc: Nathan Chancellor <[email protected]>
Cc: Nick Desaulniers <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Tom Rix <[email protected]>
Cc: [email protected]
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
Reads a line to allocated memory up to a newline following the getline
API.
Committer notes:
It also adds this new function to the 'api io' 'perf test' entry:
$ perf test "api io"
64: Test api io : Ok
$
Signed-off-by: Ian Rogers <[email protected]>
Tested-by: Arnaldo Carvalho de Melo <[email protected]>
Acked-by: Namhyung Kim <[email protected]>
Cc: Adrian Hunter <[email protected]>
Cc: Alexander Shishkin <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Mark Rutland <[email protected]>
Cc: Nathan Chancellor <[email protected]>
Cc: Nick Desaulniers <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Tom Rix <[email protected]>
Cc: [email protected]
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
Intel-PT calls perf_pmu__scan_file() a lot, let's use relative address
when it accesses multiple files at one place.
Signed-off-by: Namhyung Kim <[email protected]>
Acked-by: Adrian Hunter <[email protected]>
Acked-by: Ian Rogers <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Kan Liang <[email protected]>
Cc: Leo Yan <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
These two helpers will also use openat() to reduce the overhead with
relative pathnames. Convert other functions in pmu_lookup() to use
the new helpers.
Committer testing:
Before:
⬢[acme@toolbox perf-tools-next]$ perf bench internals pmu-scan
# Running 'internals/pmu-scan' benchmark:
Computing performance of sysfs PMU event scan for 100 times
Average PMU scanning took: 2729.040 usec (+- 7.117 usec)
⬢[acme@toolbox perf-tools-next]$
After:
⬢[acme@toolbox perf-tools-next]$ perf bench internals pmu-scan
# Running 'internals/pmu-scan' benchmark:
Computing performance of sysfs PMU event scan for 100 times
Average PMU scanning took: 2419.870 usec (+- 9.057 usec)
⬢[acme@toolbox perf-tools-next]$
Signed-off-by: Namhyung Kim <[email protected]>
Acked-by: Ian Rogers <[email protected]>
Tested-by: Arnaldo Carvalho de Melo <[email protected]>
Cc: Adrian Hunter <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Kan Liang <[email protected]>
Cc: Leo Yan <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
Likewise, x86 needs to traverse the PMU list to build alias.
Let's use the new helpers to use relative paths.
Signed-off-by: Namhyung Kim <[email protected]>
Acked-by: Ian Rogers <[email protected]>
Cc: Adrian Hunter <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Kan Liang <[email protected]>
Cc: Leo Yan <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
Likewise, it needs to traverse the pmu/caps directory, let's use
openat() with the dirfd instead of open() using the absolute path.
Signed-off-by: Namhyung Kim <[email protected]>
Acked-by: Ian Rogers <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Cc: Peter Zijlstra <[email protected]>
Cc: Adrian Hunter <[email protected]>
Cc: Arnaldo Carvalho de Melo <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: Leo Yan <[email protected]>
Cc: Kan Liang <[email protected]>
Cc: LKML <[email protected]>
Cc: [email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|