aboutsummaryrefslogtreecommitdiff
path: root/tools
AgeCommit message (Collapse)AuthorFilesLines
2024-09-03selftests: mptcp: join: simplify checksum_testsGeliang Tang1-32/+11
The four checksum tests are similar, only one line is different. So a for-loop can be used to simplify these tests. Signed-off-by: Geliang Tang <[email protected]> Reviewed-by: Matthieu Baerts (NGI0) <[email protected]> Signed-off-by: Matthieu Baerts (NGI0) <[email protected]> Link: https://patch.msgid.link/20240902-net-next-mptcp-mib-mpjtx-misc-v1-10-d3e0f3773b90@kernel.org Signed-off-by: Jakub Kicinski <[email protected]>
2024-09-03selftests: mptcp: join: mute errors when ran in the backgroundMatthieu Baerts (NGI0)1-18/+18
The test is supposed to be killed before the end, which will likely cause "Connection reset by peer" errors. It is confusing, especially because in case of real transfer errors, the test will not be marked as failed. But that's OK, there are many other tests checking that. Reviewed-by: Geliang Tang <[email protected]> Signed-off-by: Matthieu Baerts (NGI0) <[email protected]> Link: https://patch.msgid.link/20240902-net-next-mptcp-mib-mpjtx-misc-v1-9-d3e0f3773b90@kernel.org Signed-off-by: Jakub Kicinski <[email protected]>
2024-09-03selftests: mptcp: join: specify host being checkedMatthieu Baerts (NGI0)1-44/+45
Instead of displaying 'invert' when looking at some events like MP_FAIL, MP_FASTCLOSE, MP_RESET, RM_ADDR, which is a bit vague because they are not traditionnaly sent from one side, the host being checked is now printed. For the ADD_ADDR, only display the host when it is the client sending it, which is more unusual. Also before, the 'invert' message was printed after a few checks, but it was not clear which ones exactly. Reviewed-by: Geliang Tang <[email protected]> Signed-off-by: Matthieu Baerts (NGI0) <[email protected]> Link: https://patch.msgid.link/20240902-net-next-mptcp-mib-mpjtx-misc-v1-8-d3e0f3773b90@kernel.org Signed-off-by: Jakub Kicinski <[email protected]>
2024-09-03selftests: mptcp: join: more explicit check nameMatthieu Baerts (NGI0)1-32/+33
Before, the check names had to be very short. It is no longer the case now that these checks are printed on a dedicated line. Then, it looks better to have more explicit names. Reviewed-by: Geliang Tang <[email protected]> Signed-off-by: Matthieu Baerts (NGI0) <[email protected]> Link: https://patch.msgid.link/20240902-net-next-mptcp-mib-mpjtx-misc-v1-7-d3e0f3773b90@kernel.org Signed-off-by: Jakub Kicinski <[email protected]>
2024-09-03selftests: mptcp: join: validate MPJ SYN TX MIB countersMatthieu Baerts (NGI0)1-11/+78
A few new MPJoinSynTx MIB counters have been added in a previous commit. They are being validated here in mptcp_join.sh selftest, each time the number of received MPJ are checked. Most of the time, the number of sent SYN+MPJ is the same as the received ones. But sometimes, there are more, because there are dropped, or there are errors. While at it, the "no MPC reuse with single endpoint" subtest has been modified to force a bind() error. Reviewed-by: Geliang Tang <[email protected]> Signed-off-by: Matthieu Baerts (NGI0) <[email protected]> Link: https://patch.msgid.link/20240902-net-next-mptcp-mib-mpjtx-misc-v1-6-d3e0f3773b90@kernel.org Signed-off-by: Jakub Kicinski <[email protected]>
2024-09-03selftests: mptcp: join: one line for join checkMatthieu Baerts (NGI0)1-15/+30
Most tests are checking if the expected number of SYN/SYN+ACK/ACK JOINs have been received, each of them on one line. More Join related tests are going to be checked soon, no need to add 5 new lines per test in case of success, just one is enough. In case of issue, the errors will still be reported like before. Reviewed-by: Geliang Tang <[email protected]> Signed-off-by: Matthieu Baerts (NGI0) <[email protected]> Link: https://patch.msgid.link/20240902-net-next-mptcp-mib-mpjtx-misc-v1-5-d3e0f3773b90@kernel.org Signed-off-by: Jakub Kicinski <[email protected]>
2024-09-03selftests: mptcp: join: reduce join_nr paramsMatthieu Baerts (NGI0)1-9/+22
chk_join_nr() currently takes 9 positional parameters, 6 of them are optional. It makes it hard to read: chk_join_nr 1 1 1 1 0 1 1 0 4 Naming these vars helps to make it easier to read: join_csum_ns1=1 join_csum_ns2=0 \ join_fail_nr=1 join_rst_nr=1 join_infi_nr=0 \ join_corrupted_pkts=4 \ chk_join_nr 1 1 1 It will then be easier to add new optional parameters. Reviewed-by: Geliang Tang <[email protected]> Signed-off-by: Matthieu Baerts (NGI0) <[email protected]> Link: https://patch.msgid.link/20240902-net-next-mptcp-mib-mpjtx-misc-v1-4-d3e0f3773b90@kernel.org Signed-off-by: Jakub Kicinski <[email protected]>
2024-09-03perf parse-events: Pass cpu_list as a perf_cpu_map in __add_event()Ian Rogers1-5/+6
Previously the cpu_list is a string and typically no cpu_list is passed to __add_event(). Wanting to make events have their cpus distinct from the PMU means that in more occassions we want to pass a cpu_list. If we're reading this from sysfs it is easier to read a perf_cpu_map than allocate and pass around strings that will later be parsed. Signed-off-by: Ian Rogers <[email protected]> Cc: Adrian Hunter <[email protected]> Cc: Alexander Shishkin <[email protected]> Cc: Ananth Narayan <[email protected]> Cc: Bjorn Helgaas <[email protected]> Cc: Dhananjay Ugwekar <[email protected]> Cc: Dominique Martinet <[email protected]> Cc: Gautham Shenoy <[email protected]> Cc: Ingo Molnar <[email protected]> Cc: James Clark <[email protected]> Cc: Jiri Olsa <[email protected]> Cc: Jonathan Corbet <[email protected]> Cc: K Prateek Nayak <[email protected]> Cc: Kan Liang <[email protected]> Cc: Mark Rutland <[email protected]> Cc: Namhyung Kim <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: Ravi Bangoria <[email protected]> Cc: Sandipan Das <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2024-09-03perf pmu: Merge boolean sysfs event option parsingIan Rogers1-24/+23
Merge perf_pmu__parse_per_pkg() and perf_pmu__parse_snapshot() that do the same parsing except for the file suffix used. Signed-off-by: Ian Rogers <[email protected]> Cc: Adrian Hunter <[email protected]> Cc: Alexander Shishkin <[email protected]> Cc: Ananth Narayan <[email protected]> Cc: Bjorn Helgaas <[email protected]> Cc: Dhananjay Ugwekar <[email protected]> Cc: Dominique Martinet <[email protected]> Cc: Gautham Shenoy <[email protected]> Cc: Ingo Molnar <[email protected]> Cc: James Clark <[email protected]> Cc: Jiri Olsa <[email protected]> Cc: Jonathan Corbet <[email protected]> Cc: K Prateek Nayak <[email protected]> Cc: Kan Liang <[email protected]> Cc: Mark Rutland <[email protected]> Cc: Namhyung Kim <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: Ravi Bangoria <[email protected]> Cc: Sandipan Das <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2024-09-03perf sched timehist: Add --prio optionYang Jihong2-1/+79
The --prio option is used to only show events for the given task priority(ies). The default is to show events for all priority tasks, which is consistent with the previous behavior. Testcase: # perf sched record nice -n 9 perf bench sched messaging -l 10000 # Running 'sched/messaging' benchmark: # 20 sender and receiver processes per group # 10 groups == 400 processes run Total time: 3.435 [sec] [ perf record: Woken up 270 times to write data ] [ perf record: Captured and wrote 618.688 MB perf.data (5729036 samples) ] # perf sched timehist -h Usage: perf sched timehist [<options>] -C, --cpu <cpu> list of cpus to profile -D, --dump-raw-trace dump raw trace in ASCII -f, --force don't complain, do it -g, --call-graph Display call chains if present (default on) -I, --idle-hist Show idle events only -i, --input <file> input file name -k, --vmlinux <file> vmlinux pathname -M, --migrations Show migration events -n, --next Show next task -p, --pid <pid[,pid...]> analyze events only for given process id(s) -s, --summary Show only syscall summary with statistics -S, --with-summary Show all syscalls and summary with statistics -t, --tid <tid[,tid...]> analyze events only for given thread id(s) -V, --cpu-visual Add CPU visual -v, --verbose be more verbose (show symbol address, etc) -w, --wakeups Show wakeup events --kallsyms <file> kallsyms pathname --max-stack <n> Maximum number of functions to display backtrace. --prio <prio> analyze events only for given task priority(ies) --show-prio Show task priority --state Show task state when sched-out --symfs <directory> Look for files with symbols relative to this directory --time <str> Time span for analysis (start,stop) # perf sched timehist --prio 140 Samples of sched_switch event do not have callchains. Invalid prio string # perf sched timehist --show-prio --prio 129 Samples of sched_switch event do not have callchains. time cpu task name prio wait time sch delay run time [tid/pid] (msec) (msec) (msec) --------------- ------ ------------------------------ -------- --------- --------- --------- 2090450.765421 [0002] sched-messaging[1229618] 129 0.000 0.000 0.029 2090450.765445 [0007] sched-messaging[1229616] 129 0.000 0.062 0.043 2090450.765448 [0014] sched-messaging[1229619] 129 0.000 0.000 0.032 2090450.765478 [0013] sched-messaging[1229617] 129 0.000 0.065 0.048 2090450.765503 [0014] sched-messaging[1229622] 129 0.000 0.000 0.017 2090450.765550 [0002] sched-messaging[1229624] 129 0.000 0.000 0.021 2090450.765562 [0007] sched-messaging[1229621] 129 0.000 0.071 0.028 2090450.765570 [0005] sched-messaging[1229620] 129 0.000 0.064 0.066 2090450.765583 [0001] sched-messaging[1229625] 129 0.000 0.001 0.031 2090450.765595 [0013] sched-messaging[1229623] 129 0.000 0.060 0.028 2090450.765637 [0014] sched-messaging[1229628] 129 0.000 0.000 0.019 2090450.765665 [0007] sched-messaging[1229627] 129 0.000 0.038 0.030 <SNIP> # perf sched timehist --show-prio --prio 0,120-129 Samples of sched_switch event do not have callchains. time cpu task name prio wait time sch delay run time [tid/pid] (msec) (msec) (msec) --------------- ------ ------------------------------ -------- --------- --------- --------- 2090450.763231 [0000] perf[1229608] 120 0.000 0.000 0.000 2090450.763235 [0000] migration/0[15] 0 0.000 0.001 0.003 2090450.763263 [0001] perf[1229608] 120 0.000 0.000 0.000 2090450.763268 [0001] migration/1[21] 0 0.000 0.001 0.004 2090450.763302 [0002] perf[1229608] 120 0.000 0.000 0.000 2090450.763309 [0002] migration/2[27] 0 0.000 0.001 0.007 2090450.763338 [0003] perf[1229608] 120 0.000 0.000 0.000 2090450.763343 [0003] migration/3[33] 0 0.000 0.001 0.004 2090450.763459 [0004] perf[1229608] 120 0.000 0.000 0.000 2090450.763469 [0004] migration/4[39] 0 0.000 0.002 0.010 2090450.763496 [0005] perf[1229608] 120 0.000 0.000 0.000 2090450.763501 [0005] migration/5[45] 0 0.000 0.001 0.004 2090450.763613 [0006] perf[1229608] 120 0.000 0.000 0.000 2090450.763622 [0006] migration/6[51] 0 0.000 0.001 0.008 2090450.763652 [0007] perf[1229608] 120 0.000 0.000 0.000 2090450.763660 [0007] migration/7[57] 0 0.000 0.001 0.008 <SNIP> 2090450.765665 [0001] <idle> 120 0.031 0.031 0.081 2090450.765665 [0007] sched-messaging[1229627] 129 0.000 0.038 0.030 2090450.765667 [0000] s1-perf[8235/7168] 120 0.008 0.000 0.004 2090450.765684 [0013] <idle> 120 0.028 0.028 0.088 2090450.765685 [0001] sched-messaging[1229630] 129 0.000 0.001 0.020 2090450.765688 [0000] <idle> 120 0.004 0.004 0.020 2090450.765689 [0002] <idle> 120 0.021 0.021 0.138 2090450.765691 [0005] sched-messaging[1229626] 129 0.000 0.085 0.029 Signed-off-by: Yang Jihong <[email protected]> Acked-by: Namhyung Kim <[email protected]> Cc: Adrian Hunter <[email protected]> Cc: Alexander Shishkin <[email protected]> Cc: Ian Rogers <[email protected]> Cc: Ingo Molnar <[email protected]> Cc: James Clark <[email protected]> Cc: Jiri Olsa <[email protected]> Cc: Kan Liang <[email protected]> Cc: Mark Rutland <[email protected]> Cc: Peter Zijlstra <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2024-09-03perf sched timehist: Add --show-prio optionYang Jihong2-7/+87
The --show-prio option is used to display the priority of task. It is disabled by default, which is consistent with original behavior. The display format is xxx (priority does not change during task running) or xxx->yyy (priority changes during task running) Testcase: # perf sched record nice -n 9 true [ perf record: Woken up 0 times to write data ] [ perf record: Captured and wrote 0.497 MB perf.data ] # perf sched timehist -h Usage: perf sched timehist [<options>] -C, --cpu <cpu> list of cpus to profile -D, --dump-raw-trace dump raw trace in ASCII -f, --force don't complain, do it -g, --call-graph Display call chains if present (default on) -I, --idle-hist Show idle events only -i, --input <file> input file name -k, --vmlinux <file> vmlinux pathname -M, --migrations Show migration events -n, --next Show next task -p, --pid <pid[,pid...]> analyze events only for given process id(s) -s, --summary Show only syscall summary with statistics -S, --with-summary Show all syscalls and summary with statistics -t, --tid <tid[,tid...]> analyze events only for given thread id(s) -V, --cpu-visual Add CPU visual -v, --verbose be more verbose (show symbol address, etc) -w, --wakeups Show wakeup events --kallsyms <file> kallsyms pathname --max-stack <n> Maximum number of functions to display backtrace. --show-prio Show task priority --state Show task state when sched-out --symfs <directory> Look for files with symbols relative to this directory --time <str> Time span for analysis (start,stop) # perf sched timehist Samples of sched_switch event do not have callchains. time cpu task name wait time sch delay run time [tid/pid] (msec) (msec) (msec) --------------- ------ ------------------------------ --------- --------- --------- 23952.006537 [0000] perf[534] 0.000 0.000 0.000 23952.006593 [0000] migration/0[19] 0.000 0.014 0.056 23952.006899 [0001] perf[534] 0.000 0.000 0.000 23952.006947 [0001] migration/1[22] 0.000 0.015 0.047 23952.007138 [0002] perf[534] 0.000 0.000 0.000 <SNIP> # perf sched timehist --show-prio Samples of sched_switch event do not have callchains. time cpu task name prio wait time sch delay run time [tid/pid] (msec) (msec) (msec) --------------- ------ ------------------------------ -------- --------- --------- --------- 23952.006537 [0000] perf[534] 120 0.000 0.000 0.000 23952.006593 [0000] migration/0[19] 0 0.000 0.014 0.056 23952.006899 [0001] perf[534] 120 0.000 0.000 0.000 <SNIP> 23952.034843 [0003] nice[535] 120->129 0.189 0.024 23.314 <SNIP> 23952.053838 [0005] rcu_preempt[16] 120 3.993 0.000 0.023 23952.053990 [0005] <idle> 120 0.023 0.023 0.152 23952.054137 [0006] <idle> 120 1.427 1.427 17.855 23952.054278 [0007] <idle> 120 0.506 0.506 1.650 Signed-off-by: Yang Jihong <[email protected]> Acked-by: Namhyung Kim <[email protected]> Cc: Adrian Hunter <[email protected]> Cc: Alexander Shishkin <[email protected]> Cc: Ian Rogers <[email protected]> Cc: Ingo Molnar <[email protected]> Cc: James Clark <[email protected]> Cc: Jiri Olsa <[email protected]> Cc: Kan Liang <[email protected]> Cc: Mark Rutland <[email protected]> Cc: Peter Zijlstra <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2024-09-03perf sched timehist: Remove redundant BUG_ON in timehist_sched_change_event()Yang Jihong1-2/+0
The BUG_ON(thread__tid(thread) != 0) in timehist_sched_change_event() is redundant, remove it. No functional change. Fixes: 07235f84ece6b66f ("perf sched timehist: Add -I/--idle-hist option") Reviewed-by: Madadi Vineeth Reddy <[email protected]> Signed-off-by: Yang Jihong <[email protected]> Acked-by: Namhyung Kim <[email protected]> Cc: Adrian Hunter <[email protected]> Cc: Alexander Shishkin <[email protected]> Cc: Ian Rogers <[email protected]> Cc: Ingo Molnar <[email protected]> Cc: James Clark <[email protected]> Cc: Jiri Olsa <[email protected]> Cc: Kan Liang <[email protected]> Cc: Mark Rutland <[email protected]> Cc: Namhyung Kim <[email protected]> Cc: Peter Zijlstra <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2024-09-03perf sched timehist: Skip print non-idle task samples when only show idle eventsYang Jihong1-3/+3
when only show idle events, runtime stats of non-idle tasks is not updated, and the value is 0, there is no need to print non-idle samples. Before: # perf sched timehist -I Samples of sched_switch event do not have callchains. time cpu task name wait time sch delay run time [tid/pid] (msec) (msec) (msec) --------------- ------ ------------------------------ --------- --------- --------- 2090450.763235 [0000] migration/0[15] 0.000 0.000 0.000 2090450.763268 [0001] migration/1[21] 0.000 0.000 0.000 2090450.763309 [0002] migration/2[27] 0.000 0.000 0.000 2090450.763343 [0003] migration/3[33] 0.000 0.000 0.000 2090450.763469 [0004] migration/4[39] 0.000 0.000 0.000 2090450.763501 [0005] migration/5[45] 0.000 0.000 0.000 2090450.763622 [0006] migration/6[51] 0.000 0.000 0.000 2090450.763660 [0007] migration/7[57] 0.000 0.000 0.000 2090450.763741 [0009] migration/9[69] 0.000 0.000 0.000 2090450.763862 [0010] migration/10[75] 0.000 0.000 0.000 2090450.763894 [0011] migration/11[81] 0.000 0.000 0.000 2090450.764021 [0012] migration/12[87] 0.000 0.000 0.000 2090450.764056 [0013] migration/13[93] 0.000 0.000 0.000 2090450.764135 [0014] migration/14[99] 0.000 0.000 0.000 2090450.764163 [0015] migration/15[105] 0.000 0.000 0.000 2090450.764292 [0016] migration/16[111] 0.000 0.000 0.000 2090450.764371 [0017] migration/17[117] 0.000 0.000 0.000 2090450.764422 [0018] migration/18[123] 0.000 0.000 0.000 2090450.764490 [0000] <idle> 0.000 0.000 1.255 2090450.764505 [0000] s1-perf[8235/7168] 0.000 0.000 0.000 2090450.764571 [0016] <idle> 0.000 0.000 0.278 2090450.764588 [0010] <idle> 0.000 0.000 0.725 2090450.764590 [0016] s1-agent[7179/7162] 0.000 0.000 0.000 2090450.764635 [0000] <idle> 0.015 0.015 0.129 2090450.764637 [0017] <idle> 0.000 0.000 0.266 2090450.764639 [0000] s1-perf[8235/7168] 0.000 0.000 0.000 2090450.764668 [0017] s1-agent[7180/7162] 0.000 0.000 0.000 2090450.764669 [0000] <idle> 0.003 0.003 0.029 2090450.764672 [0000] s1-perf[8235/7168] 0.000 0.000 0.000 2090450.764683 [0000] <idle> 0.003 0.003 0.010 After: # perf sched timehist -I Samples of sched_switch event do not have callchains. time cpu task name wait time sch delay run time [tid/pid] (msec) (msec) (msec) --------------- ------ ------------------------------ --------- --------- --------- 2090450.764490 [0000] <idle> 0.000 0.000 1.255 2090450.764571 [0016] <idle> 0.000 0.000 0.278 2090450.764588 [0010] <idle> 0.000 0.000 0.725 2090450.764635 [0000] <idle> 0.015 0.015 0.129 2090450.764637 [0017] <idle> 0.000 0.000 0.266 2090450.764669 [0000] <idle> 0.003 0.003 0.029 2090450.764683 [0000] <idle> 0.003 0.003 0.010 2090450.764688 [0016] <idle> 0.019 0.019 0.097 2090450.764694 [0000] <idle> 0.001 0.001 0.009 2090450.764706 [0000] <idle> 0.001 0.001 0.010 2090450.764725 [0002] <idle> 0.000 0.000 1.415 2090450.764728 [0000] <idle> 0.002 0.002 0.019 2090450.764823 [0000] <idle> 0.003 0.003 0.091 2090450.764838 [0019] <idle> 0.000 0.000 0.154 2090450.764865 [0002] <idle> 0.109 0.109 0.029 2090450.764866 [0000] <idle> 0.012 0.012 0.030 2090450.764880 [0002] <idle> 0.013 0.013 0.001 2090450.764880 [0000] <idle> 0.002 0.002 0.011 2090450.764896 [0000] <idle> 0.001 0.001 0.013 2090450.764903 [0019] <idle> 0.063 0.063 0.002 2090450.764908 [0019] <idle> 0.003 0.003 0.001 Fixes: 07235f84ece6b66f ("perf sched timehist: Add -I/--idle-hist option") Signed-off-by: Yang Jihong <[email protected]> Acked-by: Namhyung Kim <[email protected]> Cc: Adrian Hunter <[email protected]> Cc: Alexander Shishkin <[email protected]> Cc: Ian Rogers <[email protected]> Cc: Ingo Molnar <[email protected]> Cc: James Clark <[email protected]> Cc: Jiri Olsa <[email protected]> Cc: Kan Liang <[email protected]> Cc: Mark Rutland <[email protected]> Cc: Namhyung Kim <[email protected]> Cc: Peter Zijlstra <[email protected]> Link: https://lore.kernel.org/r/[email protected] Reviewed-and-tested-by: Madadi Vineeth Reddy <[email protected]> Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2024-09-03tools/iio: Add memory allocation failure check for trigger_nameZhu Jun1-0/+4
Added a check to handle memory allocation failure for `trigger_name` and return `-ENOMEM`. Signed-off-by: Zhu Jun <[email protected]> Link: https://patch.msgid.link/[email protected] Signed-off-by: Jonathan Cameron <[email protected]>
2024-09-03selftests: filesystems: fix warn_unused_result build warningsAbhinav Jain1-2/+5
Add return value checks for read & write calls in test_listmount_ns function. This patch resolves below compilation warnings: ``` statmount_test_ns.c: In function ‘test_listmount_ns’: statmount_test_ns.c:322:17: warning: ignoring return value of ‘write’ declared with attribute ‘warn_unused_result’ [-Wunused-result] statmount_test_ns.c:323:17: warning: ignoring return value of ‘read’ declared with attribute ‘warn_unused_result’ [-Wunused-result] ``` Signed-off-by: Abhinav Jain <[email protected]> Signed-off-by: Shuah Khan <[email protected]>
2024-09-03perf script: Minimize "not reaching sample" for '-F +brstackinsn'Andi Kleen4-6/+9
In some situations 'perf script -F +brstackinsn' sees a lot of "not reaching sample" messages. This happens when the last LBR block before the sample contains a branch that is not in the LBR, and the instruction dumping stops. $ perf record -b emacs -Q --batch '()' [ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 0.396 MB perf.data (443 samples) ] $ perf script -F +brstackinsn ... 00007f0ab2d171a4 insn: 41 0f 94 c0 00007f0ab2d171a8 insn: 83 fa 01 00007f0ab2d171ab insn: 74 d3 # PRED 6 cycles [313] 1.00 IPC 00007f0ab2d17180 insn: 45 84 c0 00007f0ab2d17183 insn: 74 28 ... not reaching sample ... $ perf script -F +brstackinsn | grep -c reach 136 $ This is a problem for further analysis that wants to see the full code upto the sample. There are two common cases where the message is bogus: - The LBR only logs taken branches, but the branch might be a conditional branch that is not taken (that is the most common case actually) - The LBR sampling uses a filter ignoring some branches, but the perf script check checks for all branches. This patch fixes these two conditions, by only checking for conditional branches, as well as checking the perf_event_attr's branch filter attributes. For the test case above it fixes all the messages: $ ./perf script -F +brstackinsn | grep -c reach 0 Note that there are still conditions when the message is hit -- sometimes there can be a unconditional branch that misses the LBR update before the sample -- but they are much more rare now. Signed-off-by: Andi Kleen <[email protected]> Reviewed-by: Adrian Hunter <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2024-09-03perf record offcpu: Constify control data for BPFNamhyung Kim2-12/+13
The control knobs set before loading BPF programs should be declared as 'const volatile' so that it can be optimized by the BPF core. Committer testing: root@x1:~# perf record --off-cpu ^C[ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 1.807 MB perf.data (5645 samples) ] root@x1:~# perf evlist cpu_atom/cycles/P cpu_core/cycles/P offcpu-time dummy:u root@x1:~# perf evlist -v cpu_atom/cycles/P: type: 0 (PERF_TYPE_HARDWARE), size: 136, config: 0xa00000000, { sample_period, sample_freq }: 4000, sample_type: IP|TID|TIME|CPU|PERIOD|IDENTIFIER, read_format: ID|LOST, disabled: 1, inherit: 1, freq: 1, precise_ip: 3, sample_id_all: 1 cpu_core/cycles/P: type: 0 (PERF_TYPE_HARDWARE), size: 136, config: 0x400000000, { sample_period, sample_freq }: 4000, sample_type: IP|TID|TIME|CPU|PERIOD|IDENTIFIER, read_format: ID|LOST, disabled: 1, inherit: 1, freq: 1, precise_ip: 3, sample_id_all: 1 offcpu-time: type: 1 (software), size: 136, config: 0xa (PERF_COUNT_SW_BPF_OUTPUT), { sample_period, sample_freq }: 1, sample_type: IP|TID|TIME|CALLCHAIN|CPU|PERIOD|IDENTIFIER, read_format: ID|LOST, disabled: 1, inherit: 1, freq: 1, sample_id_all: 1 dummy:u: type: 1 (software), size: 136, config: 0x9 (PERF_COUNT_SW_DUMMY), { sample_period, sample_freq }: 1, sample_type: IP|TID|TIME|CPU|IDENTIFIER, read_format: ID|LOST, inherit: 1, exclude_kernel: 1, exclude_hv: 1, mmap: 1, comm: 1, task: 1, sample_id_all: 1, exclude_guest: 1, mmap2: 1, comm_exec: 1, ksymbol: 1, bpf_event: 1 root@x1:~# perf trace -e bpf --max-events 5 perf record --off-cpu 0.000 ( 0.015 ms): :2949124/2949124 bpf(cmd: 36, uattr: 0x7ffefc6dbe30, size: 8) = -1 EOPNOTSUPP (Operation not supported) 0.031 ( 0.115 ms): :2949124/2949124 bpf(cmd: PROG_LOAD, uattr: 0x7ffefc6dbb60, size: 148) = 14 0.159 ( 0.037 ms): :2949124/2949124 bpf(cmd: PROG_LOAD, uattr: 0x7ffefc6dbc20, size: 148) = 14 23.868 ( 0.144 ms): perf/2949124 bpf(cmd: PROG_LOAD, uattr: 0x7ffefc6dbad0, size: 148) = 14 24.027 ( 0.014 ms): perf/2949124 bpf(uattr: 0x7ffefc6dbc80, size: 80) = 14 root@x1:~# Signed-off-by: Namhyung Kim <[email protected]> Tested-by: Arnaldo Carvalho de Melo <[email protected]> Cc: Adrian Hunter <[email protected]> Cc: Ian Rogers <[email protected]> Cc: Ingo Molnar <[email protected]> Cc: Jiri Olsa <[email protected]> Cc: Kan Liang <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: Song Liu <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2024-09-03perf lock contention: Constify control data for BPFNamhyung Kim2-34/+38
The control knobs set before loading BPF programs should be declared as 'const volatile' so that it can be optimized by the BPF core. Committer testing: root@x1:~# perf lock contention --use-bpf contended total wait max wait avg wait type caller 5 31.57 us 14.93 us 6.31 us mutex btrfs_delayed_update_inode+0x43 1 16.91 us 16.91 us 16.91 us rwsem:R btrfs_tree_read_lock_nested+0x1b 1 15.13 us 15.13 us 15.13 us spinlock btrfs_getattr+0xd1 1 6.65 us 6.65 us 6.65 us rwsem:R btrfs_tree_read_lock_nested+0x1b 1 4.34 us 4.34 us 4.34 us spinlock process_one_work+0x1a9 root@x1:~# root@x1:~# perf trace -e bpf --max-events 10 perf lock contention --use-bpf 0.000 ( 0.013 ms): :2948281/2948281 bpf(cmd: 36, uattr: 0x7ffd5f12d730, size: 8) = -1 EOPNOTSUPP (Operation not supported) 0.024 ( 0.120 ms): :2948281/2948281 bpf(cmd: PROG_LOAD, uattr: 0x7ffd5f12d460, size: 148) = 16 0.158 ( 0.034 ms): :2948281/2948281 bpf(cmd: PROG_LOAD, uattr: 0x7ffd5f12d520, size: 148) = 16 26.653 ( 0.154 ms): perf/2948281 bpf(cmd: PROG_LOAD, uattr: 0x7ffd5f12d3d0, size: 148) = 16 26.825 ( 0.014 ms): perf/2948281 bpf(uattr: 0x7ffd5f12d580, size: 80) = 16 87.924 ( 0.038 ms): perf/2948281 bpf(cmd: BTF_LOAD, uattr: 0x7ffd5f12d400, size: 40) = 16 87.988 ( 0.006 ms): perf/2948281 bpf(cmd: BTF_LOAD, uattr: 0x7ffd5f12d470, size: 40) = 16 88.019 ( 0.006 ms): perf/2948281 bpf(cmd: BTF_LOAD, uattr: 0x7ffd5f12d250, size: 40) = 16 88.029 ( 0.172 ms): perf/2948281 bpf(cmd: PROG_LOAD, uattr: 0x7ffd5f12d320, size: 148) = 17 88.217 ( 0.005 ms): perf/2948281 bpf(cmd: BTF_LOAD, uattr: 0x7ffd5f12d4d0, size: 40) = 16 root@x1:~# Signed-off-by: Namhyung Kim <[email protected]> Tested-by: Arnaldo Carvalho de Melo <[email protected]> Cc: Adrian Hunter <[email protected]> Cc: Ian Rogers <[email protected]> Cc: Ingo Molnar <[email protected]> Cc: Jiri Olsa <[email protected]> Cc: Kan Liang <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: Song Liu <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2024-09-03perf kwork: Constify control data for BPFNamhyung Kim4-10/+13
The control knobs set before loading BPF programs should be declared as 'const volatile' so that it can be optimized by the BPF core. Committer testing: root@x1:~# perf kwork report --use-bpf Starting trace, Hit <Ctrl+C> to stop and report ^C Kwork Name | Cpu | Total Runtime | Count | Max runtime | Max runtime start | Max runtime end | -------------------------------------------------------------------------------------------------------------------------------- (w)intel_atomic_commit_work [ | 0009 | 18.680 ms | 2 | 18.553 ms | 362410.681580 s | 362410.700133 s | (w)pm_runtime_work | 0007 | 13.300 ms | 1 | 13.300 ms | 362410.254996 s | 362410.268295 s | (w)intel_atomic_commit_work [ | 0009 | 9.846 ms | 2 | 9.717 ms | 362410.172352 s | 362410.182069 s | (w)acpi_ec_event_processor | 0002 | 8.106 ms | 1 | 8.106 ms | 362410.463187 s | 362410.471293 s | (s)SCHED:7 | 0000 | 1.351 ms | 106 | 0.063 ms | 362410.658017 s | 362410.658080 s | i915:157 | 0008 | 0.994 ms | 13 | 0.361 ms | 362411.222125 s | 362411.222486 s | (s)SCHED:7 | 0001 | 0.703 ms | 98 | 0.047 ms | 362410.245004 s | 362410.245051 s | (s)SCHED:7 | 0005 | 0.674 ms | 42 | 0.074 ms | 362411.483039 s | 362411.483113 s | (s)NET_RX:3 | 0001 | 0.556 ms | 10 | 0.079 ms | 362411.066388 s | 362411.066467 s | <SNIP> root@x1:~# perf trace -e bpf --max-events 5 perf kwork report --use-bpf 0.000 ( 0.016 ms): perf/2948007 bpf(cmd: 36, uattr: 0x7ffededa6660, size: 8) = -1 EOPNOTSUPP (Operation not supported) 0.026 ( 0.106 ms): perf/2948007 bpf(cmd: PROG_LOAD, uattr: 0x7ffededa6390, size: 148) = 12 0.152 ( 0.032 ms): perf/2948007 bpf(cmd: PROG_LOAD, uattr: 0x7ffededa6450, size: 148) = 12 26.247 ( 0.138 ms): perf/2948007 bpf(cmd: PROG_LOAD, uattr: 0x7ffededa6300, size: 148) = 12 26.396 ( 0.012 ms): perf/2948007 bpf(uattr: 0x7ffededa64b0, size: 80) = 12 Starting trace, Hit <Ctrl+C> to stop and report root@x1:~# Signed-off-by: Namhyung Kim <[email protected]> Tested-by: Arnaldo Carvalho de Melo <[email protected]> Cc: Adrian Hunter <[email protected]> Cc: Ian Rogers <[email protected]> Cc: Ingo Molnar <[email protected]> Cc: Jiri Olsa <[email protected]> Cc: Kan Liang <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: Song Liu <[email protected]> Cc: Yang Jihong <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2024-09-03perf ftrace latency: Constify control data for BPFNamhyung Kim2-7/+8
The control knobs set before loading BPF programs should be declared as 'const volatile' so that it can be optimized by the BPF core. Committer testing: root@x1:~# perf ftrace latency --use-bpf -T schedule ^C# DURATION | COUNT | GRAPH | 0 - 1 us | 0 | | 1 - 2 us | 0 | | 2 - 4 us | 0 | | 4 - 8 us | 0 | | 8 - 16 us | 1 | | 16 - 32 us | 5 | | 32 - 64 us | 2 | | 64 - 128 us | 6 | | 128 - 256 us | 7 | | 256 - 512 us | 5 | | 512 - 1024 us | 22 | # | 1 - 2 ms | 36 | ## | 2 - 4 ms | 68 | ##### | 4 - 8 ms | 22 | # | 8 - 16 ms | 91 | ####### | 16 - 32 ms | 11 | | 32 - 64 ms | 26 | ## | 64 - 128 ms | 213 | ################# | 128 - 256 ms | 19 | # | 256 - 512 ms | 14 | # | 512 - 1024 ms | 5 | | 1 - ... s | 8 | | root@x1:~# root@x1:~# perf trace -e bpf perf ftrace latency --use-bpf -T schedule 0.000 ( 0.015 ms): perf/2944525 bpf(cmd: 36, uattr: 0x7ffe80de7b40, size: 8) = -1 EOPNOTSUPP (Operation not supported) 0.025 ( 0.102 ms): perf/2944525 bpf(cmd: PROG_LOAD, uattr: 0x7ffe80de7870, size: 148) = 8 0.136 ( 0.026 ms): perf/2944525 bpf(cmd: PROG_LOAD, uattr: 0x7ffe80de7930, size: 148) = 8 0.174 ( 0.026 ms): perf/2944525 bpf(cmd: PROG_LOAD, uattr: 0x7ffe80de77e0, size: 148) = 8 0.205 ( 0.010 ms): perf/2944525 bpf(uattr: 0x7ffe80de7990, size: 80) = 8 0.227 ( 0.011 ms): perf/2944525 bpf(cmd: BTF_LOAD, uattr: 0x7ffe80de7810, size: 40) = 8 0.244 ( 0.004 ms): perf/2944525 bpf(cmd: BTF_LOAD, uattr: 0x7ffe80de7880, size: 40) = 8 0.257 ( 0.006 ms): perf/2944525 bpf(cmd: BTF_LOAD, uattr: 0x7ffe80de7660, size: 40) = 8 0.265 ( 0.058 ms): perf/2944525 bpf(cmd: PROG_LOAD, uattr: 0x7ffe80de7730, size: 148) = 9 0.330 ( 0.004 ms): perf/2944525 bpf(cmd: BTF_LOAD, uattr: 0x7ffe80de78e0, size: 40) = 8 0.337 ( 0.003 ms): perf/2944525 bpf(cmd: BTF_LOAD, uattr: 0x7ffe80de7890, size: 40) = 8 0.343 ( 0.004 ms): perf/2944525 bpf(cmd: BTF_LOAD, uattr: 0x7ffe80de7880, size: 40) = 8 0.349 ( 0.003 ms): perf/2944525 bpf(cmd: BTF_LOAD, uattr: 0x7ffe80de78b0, size: 40) = 8 0.355 ( 0.004 ms): perf/2944525 bpf(cmd: BTF_LOAD, uattr: 0x7ffe80de7890, size: 40) = 8 0.361 ( 0.003 ms): perf/2944525 bpf(cmd: BTF_LOAD, uattr: 0x7ffe80de78b0, size: 40) = 8 0.367 ( 0.003 ms): perf/2944525 bpf(cmd: BTF_LOAD, uattr: 0x7ffe80de7880, size: 40) = 8 0.373 ( 0.014 ms): perf/2944525 bpf(cmd: BTF_LOAD, uattr: 0x7ffe80de7a00, size: 40) = 8 0.390 ( 0.358 ms): perf/2944525 bpf(uattr: 0x7ffe80de7950, size: 80) = 9 0.763 ( 0.014 ms): perf/2944525 bpf(uattr: 0x7ffe80de7950, size: 80) = 9 0.783 ( 0.011 ms): perf/2944525 bpf(uattr: 0x7ffe80de7950, size: 80) = 9 0.798 ( 0.017 ms): perf/2944525 bpf(uattr: 0x7ffe80de7950, size: 80) = 9 0.819 ( 0.003 ms): perf/2944525 bpf(uattr: 0x7ffe80de7700, size: 80) = 9 0.824 ( 0.047 ms): perf/2944525 bpf(cmd: PROG_LOAD, uattr: 0x7ffe80de76c0, size: 148) = 10 0.878 ( 0.008 ms): perf/2944525 bpf(uattr: 0x7ffe80de7950, size: 80) = 9 0.891 ( 0.014 ms): perf/2944525 bpf(cmd: MAP_UPDATE_ELEM, uattr: 0x7ffe80de79e0, size: 32) = 0 0.910 ( 0.103 ms): perf/2944525 bpf(cmd: PROG_LOAD, uattr: 0x7ffe80de7880, size: 148) = 9 1.016 ( 0.143 ms): perf/2944525 bpf(cmd: PROG_LOAD, uattr: 0x7ffe80de7880, size: 148) = 10 3.777 ( 0.068 ms): perf/2944525 bpf(cmd: PROG_LOAD, uattr: 0x7ffe80de7570, size: 148) = 12 3.848 ( 0.003 ms): perf/2944525 bpf(cmd: LINK_CREATE, uattr: 0x7ffe80de7550, size: 64) = -1 EBADF (Bad file descriptor) 3.859 ( 0.006 ms): perf/2944525 bpf(cmd: LINK_CREATE, uattr: 0x7ffe80de77c0, size: 64) = 12 6.504 ( 0.010 ms): perf/2944525 bpf(cmd: LINK_CREATE, uattr: 0x7ffe80de77c0, size: 64) = 14 ^C# DURATION | COUNT | GRAPH | 0 - 1 us | 0 | | 1 - 2 us | 0 | | 2 - 4 us | 1 | | 4 - 8 us | 3 | | 8 - 16 us | 3 | | 16 - 32 us | 11 | | 32 - 64 us | 9 | | 64 - 128 us | 17 | | 128 - 256 us | 30 | # | 256 - 512 us | 20 | | 512 - 1024 us | 42 | # | 1 - 2 ms | 151 | ###### | 2 - 4 ms | 106 | #### | 4 - 8 ms | 18 | | 8 - 16 ms | 149 | ###### | 16 - 32 ms | 30 | # | 32 - 64 ms | 17 | | 64 - 128 ms | 360 | ############### | 128 - 256 ms | 52 | ## | 256 - 512 ms | 18 | | 512 - 1024 ms | 28 | # | 1 - ... s | 5 | | root@x1:~# Signed-off-by: Namhyung Kim <[email protected]> Tested-by: Arnaldo Carvalho de Melo <[email protected]> Cc: Adrian Hunter <[email protected]> Cc: Ian Rogers <[email protected]> Cc: Ingo Molnar <[email protected]> Cc: Jiri Olsa <[email protected]> Cc: Kan Liang <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: Song Liu <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2024-09-03perf stat: Constify control data for BPFNamhyung Kim2-4/+4
The control knobs set before loading BPF programs should be declared as 'const volatile' so that it can be optimized by the BPF core. Committer testing: root@x1:~# perf stat --bpf-counters -e cpu_core/cycles/,cpu_core/instructions/ sleep 1 Performance counter stats for 'sleep 1': 2,442,583 cpu_core/cycles/ 2,494,425 cpu_core/instructions/ 1.002687372 seconds time elapsed 0.001126000 seconds user 0.001166000 seconds sys root@x1:~# perf trace -e bpf --max-events 10 perf stat --bpf-counters -e cpu_core/cycles/,cpu_core/instructions/ sleep 1 0.000 ( 0.019 ms): perf/2944119 bpf(cmd: OBJ_GET, uattr: 0x7fffdf5cdd40, size: 20) = 5 0.021 ( 0.002 ms): perf/2944119 bpf(cmd: OBJ_GET_INFO_BY_FD, uattr: 0x7fffdf5cdcd0, size: 16) = 0 0.030 ( 0.005 ms): perf/2944119 bpf(cmd: MAP_LOOKUP_ELEM, uattr: 0x7fffdf5ceda0, size: 32) = 0 0.037 ( 0.004 ms): perf/2944119 bpf(cmd: LINK_GET_FD_BY_ID, uattr: 0x7fffdf5ced80, size: 12) = -1 ENOENT (No such file or directory) 0.189 ( 0.004 ms): perf/2944119 bpf(cmd: 36, uattr: 0x7fffdf5cec10, size: 8) = -1 EOPNOTSUPP (Operation not supported) 0.201 ( 0.095 ms): perf/2944119 bpf(cmd: PROG_LOAD, uattr: 0x7fffdf5ce940, size: 148) = 10 0.305 ( 0.026 ms): perf/2944119 bpf(cmd: PROG_LOAD, uattr: 0x7fffdf5cea00, size: 148) = 10 0.347 ( 0.012 ms): perf/2944119 bpf(cmd: BTF_LOAD, uattr: 0x7fffdf5ce8e0, size: 40) = 10 0.364 ( 0.004 ms): perf/2944119 bpf(cmd: BTF_LOAD, uattr: 0x7fffdf5ce950, size: 40) = 10 0.376 ( 0.006 ms): perf/2944119 bpf(cmd: BTF_LOAD, uattr: 0x7fffdf5ce730, size: 40) = 10 root@x1:~# Performance counter stats for 'sleep 1': 271,221 cpu_core/cycles/ 139,150 cpu_core/instructions/ 1.002881677 seconds time elapsed 0.001318000 seconds user 0.001314000 seconds sys root@x1:~# Signed-off-by: Namhyung Kim <[email protected]> Tested-by: Arnaldo Carvalho de Melo <[email protected]> Cc: Adrian Hunter <[email protected]> Cc: Ian Rogers <[email protected]> Cc: Ingo Molnar <[email protected]> Cc: Jiri Olsa <[email protected]> Cc: Kan Liang <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: Song Liu <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2024-09-03perf test: Make watchpoint data 32-bits on i386Ian Rogers1-0/+5
i386 only supports watchpoints up to size 4, 8 bytes causes extra counts and test failures. Signed-off-by: Ian Rogers <[email protected]> Cc: Adrian Hunter <[email protected]> Cc: Alexander Shishkin <[email protected]> Cc: Athira Rajeev <[email protected]> Cc: Chaitanya S Prakash <[email protected]> Cc: Colin Ian King <[email protected]> Cc: David Ahern <[email protected]> Cc: Dominique Martinet <[email protected]> Cc: Ingo Molnar <[email protected]> Cc: James Clark <[email protected]> Cc: Jiri Olsa <[email protected]> Cc: John Garry <[email protected]> Cc: Junhao He <[email protected]> Cc: Kan Liang <[email protected]> Cc: Mark Rutland <[email protected]> Cc: Masami Hiramatsu <[email protected]> Cc: Namhyung Kim <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: Yang Jihong <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2024-09-03perf test: Skip uprobe test if probe command isn't presentIan Rogers1-0/+7
The probe command is dependent on libelf. Skip the test if the required probe command isn't present. Signed-off-by: Ian Rogers <[email protected]> Cc: Adrian Hunter <[email protected]> Cc: Alexander Shishkin <[email protected]> Cc: Athira Rajeev <[email protected]> Cc: Chaitanya S Prakash <[email protected]> Cc: Colin Ian King <[email protected]> Cc: David Ahern <[email protected]> Cc: Dominique Martinet <[email protected]> Cc: Ingo Molnar <[email protected]> Cc: James Clark <[email protected]> Cc: Jiri Olsa <[email protected]> Cc: John Garry <[email protected]> Cc: Junhao He <[email protected]> Cc: Kan Liang <[email protected]> Cc: Mark Rutland <[email protected]> Cc: Masami Hiramatsu <[email protected]> Cc: Namhyung Kim <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: Yang Jihong <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2024-09-03perf time-utils: Fix 32-bit nsec parsingIan Rogers1-2/+2
The "time utils" test fails in 32-bit builds: ... parse_nsec_time("18446744073.709551615") Failed. ptime 4294967295709551615 expected 18446744073709551615 ... Switch strtoul to strtoull as an unsigned long in 32-bit build isn't 64-bits. Fixes: c284d669a20d408b ("perf tools: Move parse_nsec_time to time-utils.c") Signed-off-by: Ian Rogers <[email protected]> Cc: Adrian Hunter <[email protected]> Cc: Alexander Shishkin <[email protected]> Cc: Athira Rajeev <[email protected]> Cc: Chaitanya S Prakash <[email protected]> Cc: Colin Ian King <[email protected]> Cc: David Ahern <[email protected]> Cc: Dominique Martinet <[email protected]> Cc: Ingo Molnar <[email protected]> Cc: James Clark <[email protected]> Cc: Jiri Olsa <[email protected]> Cc: John Garry <[email protected]> Cc: Junhao He <[email protected]> Cc: Kan Liang <[email protected]> Cc: Mark Rutland <[email protected]> Cc: Masami Hiramatsu <[email protected]> Cc: Namhyung Kim <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: Yang Jihong <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2024-09-03perf pmus: Fix name comparisons on 32-bit systemsIan Rogers1-3/+3
The hex PMU suffix maybe 64-bit but the comparisons were "unsigned long" or 32-bit on 32-bit systems. This was causing the "PMU name comparison" test to fail in a 32-bit build. Signed-off-by: Ian Rogers <[email protected]> Cc: Adrian Hunter <[email protected]> Cc: Alexander Shishkin <[email protected]> Cc: Athira Rajeev <[email protected]> Cc: Chaitanya S Prakash <[email protected]> Cc: Colin Ian King <[email protected]> Cc: David Ahern <[email protected]> Cc: Dominique Martinet <[email protected]> Cc: Ingo Molnar <[email protected]> Cc: James Clark <[email protected]> Cc: Jiri Olsa <[email protected]> Cc: John Garry <[email protected]> Cc: Junhao He <[email protected]> Cc: Kan Liang <[email protected]> Cc: Mark Rutland <[email protected]> Cc: Masami Hiramatsu <[email protected]> Cc: Namhyung Kim <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: Yang Jihong <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2024-09-03perf annotate: LLVM-based disassemblerSteinar H. Gunderson3-0/+267
Support using LLVM as a disassembler method, allowing helperless annotation in non-distro builds. (It is also much faster than using libbfd or bfd objdump on binaries with a lot of debug information.) This is nearly identical to the output of llvm-objdump; there are some very rare whitespace differences, some minor changes to demangling (since we use perf's regular demangling and not LLVM's own) and the occasional case where llvm-objdump makes a different choice when multiple symbols share the same address. It should work across all of LLVM's supported architectures, although I've only tested 64-bit x86, and finding the right triple from perf's idea of machine architecture can sometimes be a bit tricky. Ideally, we should have some way of finding the triplet just from the file itself. Committer notes: Address this on 32-bit systems by using PRIu64 from inttypes.h 3 17.58 almalinux:9-i386 : FAIL gcc version 11.4.1 20231218 (Red Hat 11.4.1-3) (GCC) util/llvm-c-helpers.cpp: In function ‘char* make_symbol_relative_string(dso*, const char*, u64, u64)’: util/llvm-c-helpers.cpp:150:52: error: format ‘%lx’ expects argument of type ‘long unsigned int’, but argument 5 has type ‘u64’ {aka +‘long long unsigned int’} [-Werror=format=] 150 | snprintf(buf, sizeof(buf), "%s+0x%lx", | ~~^ | | | long unsigned int | %llx 151 | demangled ? demangled : sym_name, addr - base_addr); | ~~~~~~~~~~~~~~~~ | | | u64 {aka long long unsigned int} cc1plus: all warnings being treated as errors Signed-off-by: Steinar H. Gunderson <[email protected]> Cc: Ian Rogers <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2024-09-03perf annotate: Split out read_symbol()Steinar H. Gunderson1-34/+56
The Capstone disassembler code has a useful code snippet to read the bytes for a given code symbol into memory. Split it out into its own function, so that the LLVM disassembler can use it in the next patch. Signed-off-by: Steinar H. Gunderson <[email protected]> Cc: Ian Rogers <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2024-09-03perf report: Support LLVM for addr2line()Steinar H. Gunderson8-1/+263
In addition to the existing support for libbfd and calling out to an external addr2line command, add support for using libllvm directly. This is both faster than libbfd, and can be enabled in distro builds (the LLVM license has an explicit provision for GPLv2 compatibility). Thus, it is set as the primary choice if available. As an example, running 'perf report' on a medium-size profile with DWARF-based backtraces took 58 seconds with LLVM, 78 seconds with libbfd, 153 seconds with external llvm-addr2line, and I got tired and aborted the test after waiting for 55 minutes with external bfd addr2line (which is the default for perf as compiled by distributions today). Evidently, for this case, the bfd addr2line process needs 18 seconds (on a 5.2 GHz Zen 3) to load the .debug ELF in question, hits the 1-second timeout and gets killed during initialization, getting restarted anew every time. Having an in-process addr2line makes this much more robust. As future extensions, libllvm can be used in many other places where we currently use libbfd or other libraries: - Symbol enumeration (in particular, for PE binaries). - Demangling (including non-Itanium demangling, e.g. Microsoft or Rust). - Disassembling (perf annotate). However, these are much less pressing; most people don't profile PE binaries, and perf has non-bfd paths for ELF. The same with demangling; the default _cxa_demangle path works fine for most users, and while bfd objdump can be slow on large binaries, it is possible to use --objdump=llvm-objdump to get the speed benefits. (It appears LLVM-based demangling is very simple, should we want that.) Tested with LLVM 14, 15, 16, 18 and 19. For some reason, LLVM 12 was not correctly detected using feature_check, and thus was not tested. Committer notes: Added the name and a __maybe_unused to address: 1 13.50 almalinux:8 : FAIL gcc version 8.5.0 20210514 (Red Hat 8.5.0-22) (GCC) util/srcline.c: In function 'dso__free_a2l': util/srcline.c:184:20: error: parameter name omitted void dso__free_a2l(struct dso *) ^~~~~~~~~~~~ make[3]: *** [/git/perf-6.11.0-rc3/tools/build/Makefile.build:158: util] Error 2 Signed-off-by: Steinar H. Gunderson <[email protected]> Tested-by: Arnaldo Carvalho de Melo <[email protected]> Cc: Ian Rogers <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2024-09-03selftests: netfilter: nft_queue.sh: fix spurious timeout on debug kernelFlorian Westphal1-22/+40
The sctp selftest is very slow on debug kernels. Its possible that the nf_queue listener program exits due to timeout before first sctp packet is processed. In this case socat hangs until script times out. Fix this by removing the -t option where possible and kill the test program once the file transfer/socat has exited. -t sets SO_RCVTIMEO, its inteded for the 'ping' part of the selftest where we want to make sure that packets get reinjected properly without skipping a second queue request. While at it, add a helper to compare the (binary) files instead of diff. The 'diff' part was copied from a another sub-test that compares text. Let helper dump file sizes on error so we can see the progress made. Tested on an old 2010-ish box with a debug kernel and 100 iterations. This is a followup to the earlier filesize reduction change. Reported-by: Jakub Kicinski <[email protected]> Closes: https://lore.kernel.org/netdev/[email protected]/ Fixes: 0a8b08c554da ("selftests: netfilter: nft_queue.sh: reduce test file size for debug build") Signed-off-by: Florian Westphal <[email protected]> Link: https://patch.msgid.link/[email protected] Signed-off-by: Paolo Abeni <[email protected]>
2024-09-03netdev_features: convert NETIF_F_NETNS_LOCAL to dev->netns_localAlexander Lobakin1-1/+1
"Interface can't change network namespaces" is rather an attribute, not a feature, and it can't be changed via Ethtool. Make it a "cold" private flag instead of a netdev_feature and free one more bit. Signed-off-by: Alexander Lobakin <[email protected]> Signed-off-by: Paolo Abeni <[email protected]>
2024-09-03tools: usb: p9_fwd: add usb gadget packet forwarder scriptMichael Grzeschik1-0/+243
This patch is adding an small python tool to forward 9pfs requests from the USB gadget to an existing 9pfs TCP server. Since currently all 9pfs servers lack support for the usb transport this tool is an useful helper to get started. Refer the Documentation section "USBG Example" in Documentation/filesystems/9p.rst on how to use it. Signed-off-by: Jan Luebbe <[email protected]> Signed-off-by: Michael Grzeschik <[email protected]> Tested-by: Andrzej Pietrasiewicz <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2024-09-02bpftool: Fix handling enum64 in btf dump sortingMykyta Yatsenko1-3/+4
Wrong function is used to access the first enum64 element. Substituting btf_enum(t) with btf_enum64(t) for BTF_KIND_ENUM64. Fixes: 94133cf24bb3 ("bpftool: Introduce btf c dump sorting") Signed-off-by: Mykyta Yatsenko <[email protected]> Signed-off-by: Daniel Borkmann <[email protected]> Acked-by: Quentin Monnet <[email protected]> Link: https://lore.kernel.org/bpf/[email protected]
2024-09-02perf daemon: Fix the build on more 32-bit architecturesArnaldo Carvalho de Melo1-4/+4
FYI: I'm carrying this on perf-tools-next. The previous attempt fixed the build on debian:experimental-x-mipsel, but when building on a larger set of containers I noticed it broke the build on some other 32-bit architectures such as: 42 7.87 ubuntu:18.04-x-arm : FAIL gcc version 7.5.0 (Ubuntu/Linaro 7.5.0-3ubuntu1~18.04) builtin-daemon.c: In function 'cmd_session_list': builtin-daemon.c:692:16: error: format '%llu' expects argument of type 'long long unsigned int', but argument 4 has type 'long int' [-Werror=format=] fprintf(out, "%c%" PRIu64, ^~~~~ builtin-daemon.c:694:13: csv_sep, (curr - daemon->start) / 60); ~~~~~~~~~~~~~~~~~~~~~~~~~~~ In file included from builtin-daemon.c:3:0: /usr/arm-linux-gnueabihf/include/inttypes.h:105:34: note: format string is defined here # define PRIu64 __PRI64_PREFIX "u" So lets cast that time_t (32-bit/64-bit) to uint64_t to make sure it builds everywhere. Fixes: 4bbe6002931954bb ("perf daemon: Fix the build on 32-bit architectures") Signed-off-by: Arnaldo Carvalho de Melo <[email protected]> Link: https://lore.kernel.org/r/ZsPmldtJ0D9Cua9_@x1 Signed-off-by: Namhyung Kim <[email protected]>
2024-09-02perf python: include "util/sample.h"Xu Yang1-0/+1
The 32-bit arm build system will complain: tools/perf/util/python.c:75:28: error: field ‘sample’ has incomplete type 75 | struct perf_sample sample; However, arm64 build system doesn't complain this. The root cause is arm64 define "HAVE_KVM_STAT_SUPPORT := 1" in tools/perf/arch/arm64/Makefile, but arm arch doesn't define this. This will lead to kvm-stat.h include other header files on arm64 build system, especially "util/sample.h" for util/python.c. This will try to directly include "util/sample.h" for "util/python.c" to avoid such build issue on arm platform. Signed-off-by: Xu Yang <[email protected]> Cc: [email protected] Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Namhyung Kim <[email protected]>
2024-09-02perf lock contention: Fix spinlock and rwlock accountingNamhyung Kim1-0/+3
The spinlock and rwlock use a single-element per-cpu array to track current locks due to performance reason. But this means the key is always available and it cannot simply account lock stats in the array because some of them are invalid. In fact, the contention_end() program in the BPF invalidates the entry by setting the 'lock' value to 0 instead of deleting the entry for the hashmap. So it should skip entries with the lock value of 0 in the account_end_timestamp(). Otherwise, it'd have spurious high contention on an idle machine: $ sudo perf lock con -ab -Y spinlock sleep 3 contended total wait max wait avg wait type caller 8 4.72 s 1.84 s 590.46 ms spinlock rcu_core+0xc7 8 1.87 s 1.87 s 233.48 ms spinlock process_one_work+0x1b5 2 1.87 s 1.87 s 933.92 ms spinlock worker_thread+0x1a2 3 1.81 s 1.81 s 603.93 ms spinlock tmigr_update_events+0x13c 2 1.72 s 1.72 s 861.98 ms spinlock tick_do_update_jiffies64+0x25 6 42.48 us 13.02 us 7.08 us spinlock futex_q_lock+0x2a 1 13.03 us 13.03 us 13.03 us spinlock futex_wake+0xce 1 11.61 us 11.61 us 11.61 us spinlock rcu_core+0xc7 I don't believe it has contention on a spinlock longer than 1 second. After this change, it only reports some small contentions. $ sudo perf lock con -ab -Y spinlock sleep 3 contended total wait max wait avg wait type caller 4 133.51 us 43.29 us 33.38 us spinlock tick_do_update_jiffies64+0x25 4 69.06 us 31.82 us 17.27 us spinlock process_one_work+0x1b5 2 50.66 us 25.77 us 25.33 us spinlock rcu_core+0xc7 1 28.45 us 28.45 us 28.45 us spinlock rcu_core+0xc7 1 24.77 us 24.77 us 24.77 us spinlock tmigr_update_events+0x13c 1 23.34 us 23.34 us 23.34 us spinlock raw_spin_rq_lock_nested+0x15 Fixes: b5711042a1c8 ("perf lock contention: Use per-cpu array map for spinlocks") Reported-by: Xi Wang <[email protected]> Cc: Song Liu <[email protected]> Cc: [email protected] Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Namhyung Kim <[email protected]>
2024-09-02perf test pmu: Set uninitialized PMU alias to nullVeronika Molnarova1-1/+3
Commit 3e0bf9fde2984469 ("perf pmu: Restore full PMU name wildcard support") adds a test case "PMU cmdline match" that covers PMU name wildcard support provided by function perf_pmu__match(). The test works with a wide range of supported combinations of PMU name matching but omits the case that if the perf_pmu__match() cannot match the PMU name to the wildcard, it tries to match its alias. However, this variable is not set up, causing the test case to fail when run with subprocesses or to segfault if run as a single process. ./perf test -vv 9 9: Sysfs PMU tests : 9.1: Parsing with PMU format directory : Ok 9.2: Parsing with PMU event : Ok 9.3: PMU event names : Ok 9.4: PMU name combining : Ok 9.5: PMU name comparison : Ok 9.6: PMU cmdline match : FAILED! ./perf test -F 9 9.1: Parsing with PMU format directory : Ok 9.2: Parsing with PMU event : Ok 9.3: PMU event names : Ok 9.4: PMU name combining : Ok 9.5: PMU name comparison : Ok Segmentation fault (core dumped) Initialize the PMU alias to null for all tests of perf_pmu__match() as this functionality is not being tested and the alias matching works exactly the same as the matching of the PMU name. ./perf test -F 9 9.1: Parsing with PMU format directory : Ok 9.2: Parsing with PMU event : Ok 9.3: PMU event names : Ok 9.4: PMU name combining : Ok 9.5: PMU name comparison : Ok 9.6: PMU cmdline match : Ok Fixes: 3e0bf9fde2984469 ("perf pmu: Restore full PMU name wildcard support") Signed-off-by: Veronika Molnarova <[email protected]> Cc: [email protected] Cc: [email protected] Cc: [email protected] Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Namhyung Kim <[email protected]>
2024-09-02bpftool: Add missing blank lines in bpftool-net doc exampleQuentin Monnet1-0/+2
In bpftool-net documentation, two blank lines are missing in a recently added example, causing docutils to complain: $ cd tools/bpf/bpftool $ make doc DESCEND Documentation GEN bpftool-btf.8 GEN bpftool-cgroup.8 GEN bpftool-feature.8 GEN bpftool-gen.8 GEN bpftool-iter.8 GEN bpftool-link.8 GEN bpftool-map.8 GEN bpftool-net.8 <stdin>:189: (INFO/1) Possible incomplete section title. Treating the overline as ordinary text because it's so short. <stdin>:192: (INFO/1) Blank line missing before literal block (after the "::")? Interpreted as a definition list item. <stdin>:199: (INFO/1) Possible incomplete section title. Treating the overline as ordinary text because it's so short. <stdin>:201: (INFO/1) Blank line missing before literal block (after the "::")? Interpreted as a definition list item. GEN bpftool-perf.8 GEN bpftool-prog.8 GEN bpftool.8 GEN bpftool-struct_ops.8 Add the missing blank lines. Fixes: 0d7c06125cea ("bpftool: Add document for net attach/detach on tcx subcommand") Signed-off-by: Quentin Monnet <[email protected]> Signed-off-by: Daniel Borkmann <[email protected]> Link: https://lore.kernel.org/bpf/[email protected]
2024-09-02perf tools: Build x86 32-bit syscall table from ↵Arnaldo Carvalho de Melo5-10/+484
arch/x86/entry/syscalls/syscall_32.tbl To remove one more use of the audit libs and address a problem reported with a recent change where a function isn't available when using the audit libs method, that should really go away, this being one step in that direction. The script used to generate the 64-bit syscall table was already parametrized to generate for both 64-bit and 32-bit, so just use it and wire the generated table to the syscalltbl.c routines. Reported-by: Jiri Slaby <[email protected]> Suggested-by: Ian Rogers <[email protected]> Reviewed-by: Ian Rogers <[email protected]> Tested-by: Jiri Slaby <[email protected]> Cc: Adrian Hunter <[email protected]> Cc: Howard Chu <[email protected]> Cc: Jiri Olsa <[email protected]> Cc: Kan Liang <[email protected]> Cc: Namhyung Kim <[email protected]> Link: https://lore.kernel.org/lkml/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2024-09-02tools: gpio: rm .*.cmd on make cleanzhangjiao1-1/+1
rm .*.cmd when calling make clean Signed-off-by: zhangjiao <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Bartosz Golaszewski <[email protected]>
2024-09-01failcmd: make failcmd.sh executableBreno Leitao1-0/+0
Change the file permissions of tools/testing/fault-injection/failcmd.sh to allow execution. This ensures the script can be run directly without explicitly invoking a shell. Link: https://lkml.kernel.org/r/[email protected] Signed-off-by: Breno Leitao <[email protected]> Reviewed-by: Akinobu Mita <[email protected]> Signed-off-by: Andrew Morton <[email protected]>
2024-09-01fault-injection: enhance failcmd to exit on non-hex address inputBreno Leitao1-0/+12
The failcmd.sh script in the fault-injection toolkit does not currently validate whether the provided address is in hexadecimal format. This can lead to silent failures if the address is sourced from places like `/proc/kallsyms`, which omits the '0x' prefix, potentially causing users to operate under incorrect assumptions. Introduce a new function, `exit_if_not_hex`, which checks the format of the provided address and exits with an error message if the address is not a valid hexadecimal number. This enhancement prevents users from running the command with improperly formatted addresses, thus improving the robustness and usability of the failcmd tool. Link: https://lkml.kernel.org/r/[email protected] Signed-off-by: Breno Leitao <[email protected]> Reviewed-by: Akinobu Mita <[email protected]> Signed-off-by: Andrew Morton <[email protected]>
2024-09-01maple_tree: remove mas_destroy() from mas_nomem()Sidhartha Kumar1-4/+6
Separate call to mas_destroy() from mas_nomem() so we can check for no memory errors without destroying the current maple state in mas_store_gfp(). We then add calls to mas_destroy() to callers of mas_nomem(). Link: https://lkml.kernel.org/r/[email protected] Signed-off-by: Sidhartha Kumar <[email protected]> Reviewed-by: Liam R. Howlett <[email protected]> Cc: Matthew Wilcox (Oracle) <[email protected]> Cc: Suren Baghdasaryan <[email protected]> Signed-off-by: Andrew Morton <[email protected]>
2024-09-01maple_tree: introduce mas_wr_store_type()Sidhartha Kumar1-0/+36
Introduce mas_wr_store_type() which will set the correct store type based on a walk of the tree. In mas_wr_node_store() the <= min_slots condition is changed to < as if new_end is = to mt_min_slots then there is not enough room. mas_prealloc_calc() is also introduced to abstract the calculation used to determine the number of nodes needed for a store operation. In this change a call to mas_reset() is removed in the error case of mas_prealloc(). This is only needed in the MA_STATE_REBALANCE case of mas_destroy(). We can move the call to mas_reset() directly to mas_destroy(). Also, add a test case to validate the order that we check the store type in is correct. This test models a vma expanding and then shrinking which is part of the boot process. Link: https://lkml.kernel.org/r/[email protected] Signed-off-by: Sidhartha Kumar <[email protected]> Cc: Liam R. Howlett <[email protected]> Cc: Matthew Wilcox (Oracle) <[email protected]> Cc: Suren Baghdasaryan <[email protected]> Signed-off-by: Andrew Morton <[email protected]>
2024-09-01maple_tree: add test to replicate low memory race conditionsSidhartha Kumar2-1/+88
Add new callback fields to the userspace implementation of struct kmem_cache. This allows for executing callback functions in order to further test low memory scenarios where node allocation is retried. This callback can help test race conditions by calling a function when a low memory event is tested. Link: https://lkml.kernel.org/r/[email protected] Signed-off-by: Sidhartha Kumar <[email protected]> Reviewed-by: Liam R. Howlett <[email protected]> Cc: Matthew Wilcox <[email protected]> Signed-off-by: Andrew Morton <[email protected]>
2024-09-01mm: rework accept memory helpersKirill A. Shutemov1-1/+1
Make accept_memory() and range_contains_unaccepted_memory() take 'start' and 'size' arguments instead of 'start' and 'end'. Remove accept_page(), replacing it with direct calls to accept_memory(). The accept_page() name is going to be used for a different function. Link: https://lkml.kernel.org/r/[email protected] Signed-off-by: Kirill A. Shutemov <[email protected]> Suggested-by: David Hildenbrand <[email protected]> Cc: Borislav Petkov <[email protected]> Cc: Johannes Weiner <[email protected]> Cc: Matthew Wilcox <[email protected]> Cc: Mel Gorman <[email protected]> Cc: Mike Rapoport (Microsoft) <[email protected]> Cc: Tom Lendacky <[email protected]> Cc: Vlastimil Babka <[email protected]> Signed-off-by: Andrew Morton <[email protected]>
2024-09-01selftest mm/mseal: fix test_seal_mremap_move_dontunmap_anyaddrJeff Xu1-21/+36
the syscall remap accepts following: mremap(src, size, size, MREMAP_MAYMOVE | MREMAP_DONTUNMAP, dst) when the src is sealed, the call will fail with error code: EPERM Previously, the test uses hard-coded 0xdeaddead as dst, and it will fail on the system with newer glibc installed. This patch removes test's dependency on glibc for mremap(), also fix the test and remove the hardcoded address. Link: https://lkml.kernel.org/r/[email protected] Fixes: 4926c7a52de7 ("selftest mm/mseal memory sealing") Signed-off-by: Jeff Xu <[email protected]> Reported-by: Pedro Falcato <[email protected]> Cc: Dave Hansen <[email protected]> Cc: Liam R. Howlett <[email protected]> Cc: Lorenzo Stoakes <[email protected]> Cc: Matthew Wilcox (Oracle) <[email protected]> Cc: Michael Ellerman <[email protected]> Cc: Vlastimil Babka <[email protected]> Cc: <[email protected]> Signed-off-by: Andrew Morton <[email protected]>
2024-09-01selftests/mm: add mseal test for no-discard madvisePedro Falcato1-1/+35
Add an mseal test for madvise() operations that aren't considered "discard" (e.g purely advisory ops such as MADV_RANDOM). [[email protected]: adjust the mseal test's plan] Link: https://lkml.kernel.org/r/[email protected] Link: https://lkml.kernel.org/r/[email protected] Signed-off-by: Pedro Falcato <[email protected]> Tested-by: Jeff Xu <[email protected]> Reviewed-by: Jeff Xu <[email protected]> Cc: Kees Cook <[email protected]> Cc: Liam R. Howlett <[email protected]> Cc: Shuah Khan <[email protected]> Signed-off-by: Andrew Morton <[email protected]>
2024-09-01tools: add skeleton code for userland testing of VMA logicLorenzo Stoakes6-0/+1162
Establish a new userland VMA unit testing implementation under tools/testing which utilises existing logic providing maple tree support in userland utilising the now-shared code previously exclusive to radix tree testing. This provides fundamental VMA operations whose API is defined in mm/vma.h, while stubbing out superfluous functionality. This exists as a proof-of-concept, with the test implementation functional and sufficient to allow userland compilation of vma.c, but containing only cursory tests to demonstrate basic functionality. Link: https://lkml.kernel.org/r/533ffa2eec771cbe6b387dd049a7f128a53eb616.1722251717.git.lorenzo.stoakes@oracle.com Signed-off-by: Lorenzo Stoakes <[email protected]> Tested-by: SeongJae Park <[email protected]> Acked-by: Vlastimil Babka <[email protected]> Reviewed-by: Liam R. Howlett <[email protected]> Cc: Alexander Viro <[email protected]> Cc: Brendan Higgins <[email protected]> Cc: Christian Brauner <[email protected]> Cc: David Gow <[email protected]> Cc: Eric W. Biederman <[email protected]> Cc: Jan Kara <[email protected]> Cc: Kees Cook <[email protected]> Cc: Matthew Wilcox (Oracle) <[email protected]> Cc: Rae Moar <[email protected]> Cc: Shuah Khan <[email protected]> Cc: Suren Baghdasaryan <[email protected]> Cc: Pengfei Xu <[email protected]> Signed-off-by: Andrew Morton <[email protected]>
2024-09-01tools: separate out shared radix-tree componentsLorenzo Stoakes27-69/+144
The core components contained within the radix-tree tests which provide shims for kernel headers and access to the maple tree are useful for testing other things, so separate them out and make the radix tree tests dependent on the shared components. This lays the groundwork for us to add VMA tests of the newly introduced vma.c file. Link: https://lkml.kernel.org/r/1ee720c265808168e0d75608e687607d77c36719.1722251717.git.lorenzo.stoakes@oracle.com Signed-off-by: Lorenzo Stoakes <[email protected]> Acked-by: Vlastimil Babka <[email protected]> Reviewed-by: Liam R. Howlett <[email protected]> Cc: Alexander Viro <[email protected]> Cc: Brendan Higgins <[email protected]> Cc: Christian Brauner <[email protected]> Cc: David Gow <[email protected]> Cc: Eric W. Biederman <[email protected]> Cc: Jan Kara <[email protected]> Cc: Kees Cook <[email protected]> Cc: Matthew Wilcox (Oracle) <[email protected]> Cc: Rae Moar <[email protected]> Cc: SeongJae Park <[email protected]> Cc: Shuah Khan <[email protected]> Cc: Suren Baghdasaryan <[email protected]> Cc: Pengfei Xu <[email protected]> Signed-off-by: Andrew Morton <[email protected]>
2024-09-01mm, memcg: cg2 memory{.swap,}.peak write testsDavid Finkel3-8/+280
Extend two existing tests to cover extracting memory usage through the newly mutable memory.peak and memory.swap.peak handlers. In particular, make sure to exercise adding and removing watchers with overlapping lifetimes so the less-trivial logic gets tested. The new/updated tests attempt to detect a lack of the write handler by fstat'ing the memory.peak and memory.swap.peak files and skip the tests if that's the case. Additionally, skip if the file doesn't exist at all. [[email protected]: update tests] Link: https://lkml.kernel.org/r/[email protected] Link: https://lkml.kernel.org/r/[email protected] Signed-off-by: David Finkel <[email protected]> Acked-by: Tejun Heo <[email protected]> Reviewed-by: Roman Gushchin <[email protected]> Cc: Johannes Weiner <[email protected]> Cc: Jonathan Corbet <[email protected]> Cc: Michal Hocko <[email protected]> Cc: Michal Koutný <[email protected]> Cc: Muchun Song <[email protected]> Cc: Shakeel Butt <[email protected]> Cc: Shuah Khan <[email protected]> Cc: Waiman Long <[email protected]> Cc: Zefan Li <[email protected]> Signed-off-by: Andrew Morton <[email protected]>