aboutsummaryrefslogtreecommitdiff
path: root/tools
AgeCommit message (Collapse)AuthorFilesLines
2024-02-02selftests/bpf: States pruning checks for scalar vs STACK_MISCEduard Zingerman1-0/+154
Check that stacksafe() compares spilled scalars with STACK_MISC. The following combinations are explored: - old spill of imprecise scalar is equivalent to cur STACK_{MISC,INVALID} (plus error in unpriv mode); - old spill of precise scalar is not equivalent to cur STACK_MISC; - old STACK_MISC is equivalent to cur scalar; - old STACK_MISC is not equivalent to cur non-scalar. Signed-off-by: Eduard Zingerman <[email protected]> Signed-off-by: Andrii Nakryiko <[email protected]> Link: https://lore.kernel.org/bpf/[email protected]
2024-02-02selftests/bpf: Add test cases for narrowing fillMaxim Mikityanskiy1-0/+111
The previous commit allowed to preserve boundaries and track IDs of scalars on narrowing fills. Add test cases for that pattern. Signed-off-by: Maxim Mikityanskiy <[email protected]> Signed-off-by: Andrii Nakryiko <[email protected]> Acked-by: Eduard Zingerman <[email protected]> Link: https://lore.kernel.org/bpf/[email protected]
2024-02-02bpf: Preserve boundaries and track scalars on narrowing fillMaxim Mikityanskiy1-7/+19
When the width of a fill is smaller than the width of the preceding spill, the information about scalar boundaries can still be preserved, as long as it's coerced to the right width (done by coerce_reg_to_size). Even further, if the actual value fits into the fill width, the ID can be preserved as well for further tracking of equal scalars. Implement the above improvements, which makes narrowing fills behave the same as narrowing spills and MOVs between registers. Two tests are adjusted to accommodate for endianness differences and to take into account that it's now allowed to do a narrowing fill from the least significant bits. reg_bounds_sync is added to coerce_reg_to_size to correctly adjust umin/umax boundaries after the var_off truncation, for example, a 64-bit value 0xXXXXXXXX00000000, when read as a 32-bit, gets umin = 0, umax = 0xFFFFFFFF, var_off = (0x0; 0xffffffff00000000), which needs to be synced down to umax = 0, otherwise reg_bounds_sanity_check doesn't pass. Signed-off-by: Maxim Mikityanskiy <[email protected]> Signed-off-by: Andrii Nakryiko <[email protected]> Link: https://lore.kernel.org/bpf/[email protected]
2024-02-02selftests/bpf: Test tracking spilled unbounded scalarsMaxim Mikityanskiy1-0/+27
The previous commit added tracking for unbounded scalars on spill. Add the test case to check the new functionality. Signed-off-by: Maxim Mikityanskiy <[email protected]> Signed-off-by: Andrii Nakryiko <[email protected]> Acked-by: Eduard Zingerman <[email protected]> Link: https://lore.kernel.org/bpf/[email protected]
2024-02-02bpf: Track spilled unbounded scalarsMaxim Mikityanskiy1-3/+3
Support the pattern where an unbounded scalar is spilled to the stack, then boundary checks are performed on the src register, after which the stack frame slot is refilled into a register. Before this commit, the verifier didn't treat the src register and the stack slot as related if the src register was an unbounded scalar. The register state wasn't copied, the id wasn't preserved, and the stack slot was marked as STACK_MISC. Subsequent boundary checks on the src register wouldn't result in updating the boundaries of the spilled variable on the stack. After this commit, the verifier will preserve the bond between src and dst even if src is unbounded, which permits to do boundary checks on src and refill dst later, still remembering its boundaries. Such a pattern is sometimes generated by clang when compiling complex long functions. One test is adjusted to reflect that now unbounded scalars are tracked. Signed-off-by: Maxim Mikityanskiy <[email protected]> Signed-off-by: Andrii Nakryiko <[email protected]> Acked-by: Eduard Zingerman <[email protected]> Link: https://lore.kernel.org/bpf/[email protected]
2024-02-02selftests: openvswitch: Test ICMP related matches work with SNATBrad Cowie1-0/+62
Add a test case for regression in openvswitch nat that was fixed by commit e6345d2824a3 ("netfilter: nf_nat: fix action not being set for all ct states"). Link: https://lore.kernel.org/netdev/[email protected]/ Link: https://mail.openvswitch.org/pipermail/ovs-dev/2024-January/410476.html Suggested-by: Aaron Conole <[email protected]> Signed-off-by: Brad Cowie <[email protected]> Tested-by: Aaron Conole <[email protected]> Acked-by: Aaron Conole <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2024-02-02selftests/landlock: Fix capability for net_testMickaël Salaün2-9/+44
CAP_NET_ADMIN allows to configure network interfaces, not CAP_SYS_ADMIN which only allows to call unshare(2). Without this change, running network tests as a non-root user but with all capabilities would fail at the setup_loopback() step with "RTNETLINK answers: Operation not permitted". The issue is only visible when running tests with non-root users (i.e. only relying on ambient capabilities). Indeed, when configuring the network interface, the "ip" command is called, which may lead to the special handling of capabilities for the root user by execve(2). If root is the caller, then the inherited, permitted and effective capabilities are all reset, which then includes CAP_NET_ADMIN. However, if a non-root user is the caller, then ambient capabilities are masked by the inherited ones, which were explicitly dropped. To make execution deterministic whatever users are running the tests, set the noroot secure bit for each test, and set the inheritable and ambient capabilities to CAP_NET_ADMIN, the only capability that may be required after an execve(2). Factor out _effective_cap() into _change_cap(), and use it to manage ambient capabilities with the new set_ambient_cap() and clear_ambient_cap() helpers. This makes it possible to run all Landlock tests with check-linux.sh from https://github.com/landlock-lsm/landlock-test-tools Cc: Konstantin Meskhidze <[email protected]> Fixes: a549d055a22e ("selftests/landlock: Add network tests") Link: https://lore.kernel.org/r/[email protected] [mic: Make sure SECBIT_NOROOT_LOCKED is set] Signed-off-by: Mickaël Salaün <[email protected]>
2024-02-01Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski41-212/+382
Cross-merge networking fixes after downstream PR. No conflicts or adjacent changes. Signed-off-by: Jakub Kicinski <[email protected]>
2024-02-01selftests/bpf: Fix bench runner SIGSEGVAndrii Nakryiko1-2/+10
Some benchmarks don't have either "consumer" or "producer" sides. For example, trig-tp and other BPF triggering benchmarks don't have consumers, as they only do "producing" by calling into syscall or predefined uproes. As such it's valid for some benchmarks to have zero consumers or producers. So allows to specify `-c0` explicitly. This triggers another problem. If benchmark doesn't support either consumer or producer side, consumer_thread/producer_thread callback will be NULL, but benchmark runner will attempt to use those NULL callback to create threads anyways. So instead of crashing with SIGSEGV in case of misconfigured benchmark, detect the condition and report error. Signed-off-by: Andrii Nakryiko <[email protected]> Signed-off-by: Daniel Borkmann <[email protected]> Acked-by: Eduard Zingerman <[email protected]> Link: https://lore.kernel.org/bpf/[email protected]
2024-02-01libbpf: Add missed btf_ext__raw_data() APIAndrii Nakryiko3-3/+7
Another API that was declared in libbpf.map but actual implementation was missing. btf_ext__get_raw_data() was intended as a discouraged alias to consistently-named btf_ext__raw_data(), so make this an actuality. Fixes: 20eccf29e297 ("libbpf: hide and discourage inconsistently named getters") Signed-off-by: Andrii Nakryiko <[email protected]> Signed-off-by: Daniel Borkmann <[email protected]> Acked-by: Eduard Zingerman <[email protected]> Link: https://lore.kernel.org/bpf/[email protected]
2024-02-01libbpf: Add btf__new_split() API that was declared but not implementedAndrii Nakryiko2-1/+7
Seems like original commit adding split BTF support intended to add btf__new_split() API, and even declared it in libbpf.map, but never added (trivial) implementation. Fix this. Fixes: ba451366bf44 ("libbpf: Implement basic split BTF support") Signed-off-by: Andrii Nakryiko <[email protected]> Signed-off-by: Daniel Borkmann <[email protected]> Acked-by: Eduard Zingerman <[email protected]> Link: https://lore.kernel.org/bpf/[email protected]
2024-02-01libbpf: Add missing LIBBPF_API annotation to libbpf_set_memlock_rlim APIAndrii Nakryiko1-1/+1
LIBBPF_API annotation seems missing on libbpf_set_memlock_rlim API, so add it to make this API callable from libbpf's shared library version. Fixes: e542f2c4cd16 ("libbpf: Auto-bump RLIMIT_MEMLOCK if kernel needs it for BPF") Fixes: ab9a5a05dc48 ("libbpf: fix up few libbpf.map problems") Signed-off-by: Andrii Nakryiko <[email protected]> Signed-off-by: Daniel Borkmann <[email protected]> Acked-by: Eduard Zingerman <[email protected]> Link: https://lore.kernel.org/bpf/[email protected]
2024-02-01libbpf: Call memfd_create() syscall directlyAndrii Nakryiko1-1/+10
Some versions of Android do not implement memfd_create() wrapper in their libc implementation, leading to build failures ([0]). On the other hand, memfd_create() is available as a syscall on quite old kernels (3.17+, while bpf() syscall itself is available since 3.18+), so it is ok to assume that syscall availability and call into it with syscall() helper to avoid Android-specific workarounds. Validated in libbpf-bootstrap's CI ([1]). [0] https://github.com/libbpf/libbpf-bootstrap/actions/runs/7701003207/job/20986080319#step:5:83 [1] https://github.com/libbpf/libbpf-bootstrap/actions/runs/7715988887/job/21031767212?pr=253 Signed-off-by: Andrii Nakryiko <[email protected]> Signed-off-by: Daniel Borkmann <[email protected]> Acked-by: Eduard Zingerman <[email protected]> Link: https://lore.kernel.org/bpf/[email protected]
2024-02-01Merge tag 'net-6.8-rc3' of ↵Linus Torvalds26-123/+232
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net Pull networking fixes from Jakub Kicinski: "Including fixes from netfilter. As Paolo promised we continue to hammer out issues in our selftests. This is not the end but probably the peak. Current release - regressions: - smc: fix incorrect SMC-D link group matching logic Current release - new code bugs: - eth: bnxt: silence WARN() when device skips a timestamp, it happens Previous releases - regressions: - ipmr: fix null-deref when forwarding mcast packets - conntrack: evaluate window negotiation only for packets in the REPLY direction, otherwise SYN retransmissions trigger incorrect window scale negotiation - ipset: fix performance regression in swap operation Previous releases - always broken: - tcp: add sanity checks to types of pages getting into the rx zerocopy path, we only support basic NIC -> user, no page cache pages etc. - ip6_tunnel: make sure to pull inner header in __ip6_tnl_rcv() - nt_tables: more input sanitization changes - dsa: mt7530: fix 10M/100M speed on MediaTek MT7988 switch - bridge: mcast: fix loss of snooping after long uptime, jiffies do wrap on 32bit - xen-netback: properly sync TX responses, protect with locking - phy: mediatek-ge-soc: sync calibration values with MediaTek SDK, increase connection stability - eth: pds: fixes for various teardown, and reset races Misc: - hsr: silence WARN() if we can't alloc supervision frame, it happens" * tag 'net-6.8-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (82 commits) doc/netlink/specs: Add missing attr in rt_link spec idpf: avoid compiler padding in virtchnl2_ptype struct selftests: mptcp: join: stop transfer when check is done (part 2) selftests: mptcp: join: stop transfer when check is done (part 1) selftests: mptcp: allow changing subtests prefix selftests: mptcp: decrease BW in simult flows selftests: mptcp: increase timeout to 30 min selftests: mptcp: add missing kconfig for NF Mangle selftests: mptcp: add missing kconfig for NF Filter in v6 selftests: mptcp: add missing kconfig for NF Filter mptcp: fix data re-injection from stale subflow selftests: net: enable some more knobs selftests: net: add missing config for NF_TARGET_TTL selftests: forwarding: List helper scripts in TEST_FILES Makefile variable selftests: net: List helper scripts in TEST_FILES Makefile variable selftests: net: Remove executable bits from library scripts selftests: bonding: Check initial state selftests: team: Add missing config options hv_netvsc: Fix race condition between netvsc_probe and netvsc_remove xen-netback: properly sync TX responses ...
2024-02-01Merge tag 'hid-for-linus-2024020101' of ↵Linus Torvalds1-4/+4
git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid Pull HID fixes from Benjamin Tissoires: - cleanups in the error path in hid-steam (Dan Carpenter) - fixes for Wacom tablets selftests that sneaked in while the CI was taking a break during the year end holidays (Benjamin Tissoires) - null pointer check in nvidia-shield (Kunwu Chan) - memory leak fix in hidraw (Su Hui) - another null pointer fix in i2c-hid-of (Johan Hovold) - another memory leak fix in HID-BPF this time, as well as a double fdget() fix reported by Dan Carpenter (Benjamin Tissoires) - fix for Cirque touchpad when they go on suspend (Kai-Heng Feng) - new device ID in hid-logitech-hidpp: "Logitech G Pro X SuperLight 2" (Jiri Kosina) * tag 'hid-for-linus-2024020101' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid: HID: bpf: use __bpf_kfunc instead of noinline HID: bpf: actually free hdev memory after attaching a HID-BPF program HID: bpf: remove double fdget() HID: i2c-hid-of: fix NULL-deref on failed power up HID: hidraw: fix a problem of memory leak in hidraw_release() HID: i2c-hid: Skip SET_POWER SLEEP for Cirque touchpad on system suspend HID: nvidia-shield: Add missing null pointer checks to LED initialization HID: logitech-hidpp: add support for Logitech G Pro X Superlight 2 selftests/hid: wacom: fix confidence tests HID: hid-steam: Fix cleanup in probe() HID: hid-steam: remove pointless error message
2024-02-01selftests: mptcp: join: stop transfer when check is done (part 2)Matthieu Baerts (NGI0)1-14/+9
Since the "Fixes" commits mentioned below, the newly added "userspace pm" subtests of mptcp_join selftests are launching the whole transfer in the background, do the required checks, then wait for the end of transfer. There is no need to wait longer, especially because the checks at the end of the transfer are ignored (which is fine). This saves quite a few seconds on slow environments. While at it, use 'mptcp_lib_kill_wait()' helper everywhere, instead of on a specific one with 'kill_tests_wait()'. Fixes: b2e2248f365a ("selftests: mptcp: userspace pm create id 0 subflow") Fixes: e3b47e460b4b ("selftests: mptcp: userspace pm remove initial subflow") Fixes: b9fb176081fb ("selftests: mptcp: userspace pm send RM_ADDR for ID 0") Cc: [email protected] Reviewed-and-tested-by: Geliang Tang <[email protected]> Signed-off-by: Matthieu Baerts (NGI0) <[email protected]> Link: https://lore.kernel.org/r/20240131-upstream-net-20240131-mptcp-ci-issues-v1-9-4c1c11e571ff@kernel.org Signed-off-by: Jakub Kicinski <[email protected]>
2024-02-01selftests: mptcp: join: stop transfer when check is done (part 1)Matthieu Baerts (NGI0)1-2/+2
Since the "Fixes" commit mentioned below, "userspace pm" subtests of mptcp_join selftests introduced in v6.5 are launching the whole transfer in the background, do the required checks, then wait for the end of transfer. There is no need to wait longer, especially because the checks at the end of the transfer are ignored (which is fine). This saves quite a few seconds in slow environments. Note that old versions will need commit bdbef0a6ff10 ("selftests: mptcp: add mptcp_lib_kill_wait") as well to get 'mptcp_lib_kill_wait()' helper. Fixes: 4369c198e599 ("selftests: mptcp: test userspace pm out of transfer") Cc: [email protected] # 6.5.x: bdbef0a6ff10: selftests: mptcp: add mptcp_lib_kill_wait Cc: [email protected] # 6.5.x Reviewed-and-tested-by: Geliang Tang <[email protected]> Signed-off-by: Matthieu Baerts (NGI0) <[email protected]> Link: https://lore.kernel.org/r/20240131-upstream-net-20240131-mptcp-ci-issues-v1-8-4c1c11e571ff@kernel.org Signed-off-by: Jakub Kicinski <[email protected]>
2024-02-01selftests: mptcp: allow changing subtests prefixMatthieu Baerts (NGI0)1-1/+1
If a CI executes the same selftest multiple times with different options, all results from the same subtests will have the same title, which confuse the CI. With the same title printed in TAP, the tests are considered as the same ones. Now, it is possible to override this prefix by using MPTCP_LIB_KSFT_TEST env var, and have a different title. While at it, use 'basename' to remove the suffix as well instead of using an extra 'sed'. Fixes: c4192967e62f ("selftests: mptcp: lib: format subtests results in TAP") Cc: [email protected] Signed-off-by: Matthieu Baerts (NGI0) <[email protected]> Link: https://lore.kernel.org/r/20240131-upstream-net-20240131-mptcp-ci-issues-v1-7-4c1c11e571ff@kernel.org Signed-off-by: Jakub Kicinski <[email protected]>
2024-02-01selftests: mptcp: decrease BW in simult flowsMatthieu Baerts (NGI0)1-4/+4
When running the simult_flow selftest in slow environments -- e.g. QEmu without KVM support --, the results can be unstable. This selftest checks if the aggregated bandwidth is (almost) fully used as expected. To help improving the stability while still keeping the same validation in place, the BW and the delay are reduced to lower the pressure on the CPU. Fixes: 1a418cb8e888 ("mptcp: simult flow self-tests") Fixes: 219d04992b68 ("mptcp: push pending frames when subflow has free space") Cc: [email protected] Suggested-by: Paolo Abeni <[email protected]> Signed-off-by: Matthieu Baerts (NGI0) <[email protected]> Link: https://lore.kernel.org/r/20240131-upstream-net-20240131-mptcp-ci-issues-v1-6-4c1c11e571ff@kernel.org Signed-off-by: Jakub Kicinski <[email protected]>
2024-02-01selftests: mptcp: increase timeout to 30 minMatthieu Baerts (NGI0)1-1/+1
On very slow environments -- e.g. when QEmu is used without KVM --, mptcp_join.sh selftest can take a bit more than 20 minutes. Bump the default timeout by 50% as it seems normal to take that long on some environments. When a debug kernel config is used, this selftest will take even longer, but that's certainly not a common test env to consider for the timeout. The Fixes tag that has been picked here is there simply to help having this patch backported to older stable versions. It is difficult to point to the exact commit that made some env reaching the timeout from time to time. Fixes: d17b968b9876 ("selftests: mptcp: increase timeout to 20 minutes") Cc: [email protected] Acked-by: Paolo Abeni <[email protected]> Signed-off-by: Matthieu Baerts (NGI0) <[email protected]> Link: https://lore.kernel.org/r/20240131-upstream-net-20240131-mptcp-ci-issues-v1-5-4c1c11e571ff@kernel.org Signed-off-by: Jakub Kicinski <[email protected]>
2024-02-01selftests: mptcp: add missing kconfig for NF MangleMatthieu Baerts (NGI0)1-0/+1
Since the commit mentioned below, 'mptcp_join' selftests is using IPTables to add rules to the Mangle table, only in IPv4. This KConfig is usually enabled by default in many defconfig, but we recently noticed that some CI were running our selftests without them enabled. Fixes: b6e074e171bc ("selftests: mptcp: add infinite map testcase") Cc: [email protected] Reviewed-by: Geliang Tang <[email protected]> Signed-off-by: Matthieu Baerts (NGI0) <[email protected]> Link: https://lore.kernel.org/r/20240131-upstream-net-20240131-mptcp-ci-issues-v1-4-4c1c11e571ff@kernel.org Signed-off-by: Jakub Kicinski <[email protected]>
2024-02-01selftests: mptcp: add missing kconfig for NF Filter in v6Matthieu Baerts (NGI0)1-0/+1
Since the commit mentioned below, 'mptcp_join' selftests is using IPTables to add rules to the Filter table for IPv6. It is then required to have IP6_NF_FILTER KConfig. This KConfig is usually enabled by default in many defconfig, but we recently noticed that some CI were running our selftests without them enabled. Fixes: 523514ed0a99 ("selftests: mptcp: add ADD_ADDR IPv6 test cases") Cc: [email protected] Reviewed-by: Geliang Tang <[email protected]> Signed-off-by: Matthieu Baerts (NGI0) <[email protected]> Link: https://lore.kernel.org/r/20240131-upstream-net-20240131-mptcp-ci-issues-v1-3-4c1c11e571ff@kernel.org Signed-off-by: Jakub Kicinski <[email protected]>
2024-02-01selftests: mptcp: add missing kconfig for NF FilterMatthieu Baerts (NGI0)1-0/+1
Since the commit mentioned below, 'mptcp_join' selftests is using IPTables to add rules to the Filter table. It is then required to have IP_NF_FILTER KConfig. This KConfig is usually enabled by default in many defconfig, but we recently noticed that some CI were running our selftests without them enabled. Fixes: 8d014eaa9254 ("selftests: mptcp: add ADD_ADDR timeout test case") Cc: [email protected] Reviewed-by: Geliang Tang <[email protected]> Signed-off-by: Matthieu Baerts (NGI0) <[email protected]> Signed-off-by: Jakub Kicinski <[email protected]>
2024-02-01KVM: selftests: Make hyperv_clock require TSC based system clocksourceVitaly Kuznetsov1-0/+1
KVM sets up Hyper-V TSC page clocksource for its guests when system clocksource is 'based on TSC' (see gtod_is_based_on_tsc()), running hyperv_clock with any other clocksource leads to imminent failure. Add the missing requirement to make the test skip gracefully. Signed-off-by: Vitaly Kuznetsov <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Sean Christopherson <[email protected]>
2024-02-01KVM: selftests: Run clocksource dependent tests with ↵Vitaly Kuznetsov4-5/+6
hyperv_clocksource_tsc_page too KVM's 'gtod_is_based_on_tsc()' recognizes two clocksources: 'tsc' and 'hyperv_clocksource_tsc_page' and enables kvmclock in 'masterclock' mode when either is in use. Transform 'sys_clocksource_is_tsc()' into 'sys_clocksource_is_based_on_tsc()' to support the later. This affects two tests: kvm_clock_test and vmx_nested_tsc_scaling_test, both seem to work well when system clocksource is 'hyperv_clocksource_tsc_page'. Signed-off-by: Vitaly Kuznetsov <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Sean Christopherson <[email protected]>
2024-02-01KVM: selftests: Use generic sys_clocksource_is_tsc() in ↵Vitaly Kuznetsov1-18/+1
vmx_nested_tsc_scaling_test Despite its name, system_has_stable_tsc() just checks that system clocksource is 'tsc'; this can now be done with generic sys_clocksource_is_tsc(). No functional change intended. Signed-off-by: Vitaly Kuznetsov <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Sean Christopherson <[email protected]>
2024-02-01KVM: selftests: Generalize check_clocksource() from kvm_clock_testVitaly Kuznetsov5-37/+40
Several existing x86 selftests need to check that the underlying system clocksource is TSC or based on TSC but every test implements its own check. As a first step towards unification, extract check_clocksource() from kvm_clock_test and split it into two functions: arch-neutral 'sys_get_cur_clocksource()' and x86-specific 'sys_clocksource_is_tsc()'. Fix a couple of pre-existing issues in kvm_clock_test: memory leakage in check_clocksource() and using TEST_ASSERT() instead of TEST_REQUIRE(). The change also makes the test fail when system clocksource can't be read from sysfs. Signed-off-by: Vitaly Kuznetsov <[email protected]> Link: https://lore.kernel.org/r/[email protected] [sean: eliminate if-elif pattern just to set a bool true] Signed-off-by: Sean Christopherson <[email protected]>
2024-02-01selftests: net: enable some more knobsPaolo Abeni1-0/+3
The rtnetlink tests require additional options currently off by default. Fixes: 2766a11161cc ("selftests: rtnetlink: add ipsec offload API test") Fixes: 5e596ee171ba ("selftests: add xfrm state-policy-monitor to rtnetlink.sh") Signed-off-by: Paolo Abeni <[email protected]> Link: https://lore.kernel.org/r/9048ca58e49b962f35dba1dfb2beaf3dab3e0411.1706723341.git.pabeni@redhat.com/ Signed-off-by: Jakub Kicinski <[email protected]>
2024-02-01selftests: net: add missing config for NF_TARGET_TTLJakub Kicinski1-0/+1
amt test uses the TTL iptables module: ip netns exec "${RELAY}" iptables -t mangle -I PREROUTING \ -d 239.0.0.1 -j TTL --ttl-set 2 Fixes: c08e8baea78e ("selftests: add amt interface selftest script") Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2024-02-01selftests: forwarding: List helper scripts in TEST_FILES Makefile variableBenjamin Poirier1-1/+1
Some scripts are not tests themselves; they contain utility functions used by other tests. According to Documentation/dev-tools/kselftest.rst, such files should be listed in TEST_FILES. Currently they are incorrectly listed in TEST_PROGS_EXTENDED so rename the variable. Fixes: c085dbfb1cfc ("selftests/net/forwarding: define libs as TEST_PROGS_EXTENDED") Suggested-by: Petr Machata <[email protected]> Signed-off-by: Benjamin Poirier <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2024-02-01selftests: net: List helper scripts in TEST_FILES Makefile variableBenjamin Poirier1-3/+2
Some scripts are not tests themselves; they contain utility functions used by other tests. According to Documentation/dev-tools/kselftest.rst, such files should be listed in TEST_FILES. Move those utility scripts to TEST_FILES. Fixes: 1751eb42ddb5 ("selftests: net: use TEST_PROGS_EXTENDED") Fixes: 25ae948b4478 ("selftests/net: add lib.sh") Fixes: b99ac1841147 ("kselftests/net: add missed setup_loopback.sh/setup_veth.sh to Makefile") Fixes: f5173fe3e13b ("selftests: net: included needed helper in the install targets") Suggested-by: Petr Machata <[email protected]> Signed-off-by: Benjamin Poirier <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2024-02-01selftests: net: Remove executable bits from library scriptsBenjamin Poirier2-0/+0
setup_loopback.sh and net_helper.sh are meant to be sourced from other scripts, not executed directly. Therefore, remove the executable bits from those files' permissions. This change is similar to commit 49078c1b80b6 ("selftests: forwarding: Remove executable bits from lib.sh") Fixes: 7d1575014a63 ("selftests/net: GRO coalesce test") Fixes: 3bdd9fd29cb0 ("selftests/net: synchronize udpgro tests' tx and rx connection") Suggested-by: Paolo Abeni <[email protected]> Signed-off-by: Benjamin Poirier <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2024-02-01selftests: bonding: Check initial stateBenjamin Poirier1-0/+11
The purpose of the test_LAG_cleanup() function is to check that some hardware addresses are removed from underlying devices after they have been unenslaved. The test function simply checks that those addresses are not present at the end. However, if the addresses were never added to begin with due to some error in device setup, the test function currently passes. This is a false positive since in that situation the test did not actually exercise the intended functionality. Add a check that the expected addresses are indeed present after device setup. This makes the test function more robust. I noticed this problem when running the team/dev_addr_lists.sh test on a system without support for dummy and ipv6: tools/testing/selftests/drivers/net/team# ./dev_addr_lists.sh Error: Unknown device type. Error: Unknown device type. This program is not intended to be run as root. RTNETLINK answers: Operation not supported TEST: team cleanup mode lacp [ OK ] Fixes: bbb774d921e2 ("net: Add tests for bonding and team address list management") Signed-off-by: Benjamin Poirier <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2024-02-01selftests: team: Add missing config optionsBenjamin Poirier1-1/+3
Similar to commit dd2d40acdbb2 ("selftests: bonding: Add more missing config options"), add more networking-specific config options which are needed for team device tests. For testing, I used the minimal config generated by virtme-ng and I added the options in the config file. Afterwards, the team device test passed. Fixes: bbb774d921e2 ("net: Add tests for bonding and team address list management") Reviewed-by: Petr Machata <[email protected]> Signed-off-by: Benjamin Poirier <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2024-02-01selftests/bpf: Enable inline bpf_kptr_xchg() test for RV64Pu Lehui1-1/+2
Enable inline bpf_kptr_xchg() test for RV64, and the test have passed as show below: Summary: 1/0 PASSED, 0 SKIPPED, 0 FAILED Signed-off-by: Pu Lehui <[email protected]> Signed-off-by: Daniel Borkmann <[email protected]> Acked-by: Björn Töpel <[email protected]> Link: https://lore.kernel.org/bpf/[email protected]
2024-02-01libbpf: Remove unnecessary null check in kernel_supports()Eduard Zingerman1-1/+1
After recent changes, Coverity complained about inconsistent null checks in kernel_supports() function: kernel_supports(const struct bpf_object *obj, ...) [...] // var_compare_op: Comparing obj to null implies that obj might be null if (obj && obj->gen_loader) return true; // var_deref_op: Dereferencing null pointer obj if (obj->token_fd) return feat_supported(obj->feat_cache, feat_id); [...] - The original null check was introduced by commit [0], which introduced a call `kernel_supports(NULL, ...)` in function bump_rlimit_memlock(); - This call was refactored to use `feat_supported(NULL, ...)` in commit [1]. Looking at all places where kernel_supports() is called: - There is either `obj->...` access before the call; - Or `obj` comes from `prog->obj` expression, where `prog` comes from enumeration of programs in `obj`; - Or `obj` comes from `prog->obj`, where `prog` is a parameter to one of the API functions: - bpf_program__attach_kprobe_opts; - bpf_program__attach_kprobe; - bpf_program__attach_ksyscall. Assuming correct API usage, it appears that `obj` can never be null when passed to kernel_supports(). Silence the Coverity warning by removing redundant null check. [0] e542f2c4cd16 ("libbpf: Auto-bump RLIMIT_MEMLOCK if kernel needs it for BPF") [1] d6dd1d49367a ("libbpf: Further decouple feature checking logic from bpf_object") Signed-off-by: Eduard Zingerman <[email protected]> Signed-off-by: Daniel Borkmann <[email protected]> Link: https://lore.kernel.org/bpf/[email protected]
2024-01-31tools/net/ynl: Add type info to struct members in generated docsDonald Hunter1-1/+8
Extend the ynl doc generator to include type information for struct members, ignoring the pad type. Signed-off-by: Donald Hunter <[email protected]> Reviewed-by: Jiri Pirko <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2024-01-31tools/net/ynl: Add support for nested structsDonald Hunter2-6/+22
Make it possible for struct definitions to reference other struct definitions ofr binary members. For example, the tbf qdisc uses this struct definition for its parms attribute: - name: tc-tbf-qopt type: struct members: - name: rate type: binary struct: tc-ratespec - name: peakrate type: binary struct: tc-ratespec - name: limit type: u32 - name: buffer type: u32 - name: mtu type: u32 This adds the necessary schema changes and adds nested struct encoding and decoding to ynl. Signed-off-by: Donald Hunter <[email protected]> Reviewed-by: Jiri Pirko <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2024-01-31tools/net/ynl: Move formatted_string method out of NlAttrDonald Hunter1-16/+15
The formatted_string() class method was in NlAttr so that it could be accessed by NlAttr.as_struct(). Now that as_struct() has been removed, move formatted_string() to YnlFamily as an internal helper method. Signed-off-by: Donald Hunter <[email protected]> Reviewed-by: Breno Leitao <[email protected]> Reviewed-by: Jiri Pirko <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2024-01-31tools/net/ynl: Rename _fixed_header_size() to _struct_size()Donald Hunter1-6/+6
Refactor the _fixed_header_size() method to be _struct_size() so that naming is consistent with _encode_struct() and _decode_struct(). Signed-off-by: Donald Hunter <[email protected]> Reviewed-by: Jiri Pirko <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2024-01-31tools/net/ynl: Combine struct decoding logic in ynlDonald Hunter1-33/+14
_decode_fixed_header() and NlAttr.as_struct() both implemented struct decoding logic. Deduplicate the code into newly named _decode_struct() method. Signed-off-by: Donald Hunter <[email protected]> Reviewed-by: Jiri Pirko <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2024-01-31tools/net/ynl: Encode default values for binary blobsDonald Hunter1-2/+7
Add support for defaulting binary byte arrays to all zeros as well as defaulting scalar values to 0 when encoding input parameters. Signed-off-by: Donald Hunter <[email protected]> Reviewed-by: Jiri Pirko <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2024-01-31tools/net/ynl: Add support for encoding sub-messagesDonald Hunter1-4/+23
Add sub-message encoding to ynl. This makes it possible to create tc qdiscs and other polymorphic netlink objects. Signed-off-by: Donald Hunter <[email protected]> Reviewed-by: Jiri Pirko <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2024-01-31tools/net/ynl: Refactor fixed header encoding into separate methodDonald Hunter1-11/+15
Refactor the fixed header encoding into a separate _encode_struct method so that it can be reused for fixed headers in sub-messages and for encoding structs. Signed-off-by: Donald Hunter <[email protected]> Reviewed-by: Breno Leitao <[email protected]> Reviewed-by: Jiri Pirko <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2024-01-31tools/net/ynl: Support sub-messages in nested attribute spacesDonald Hunter1-9/+29
Sub-message selectors could only be resolved using values from the current nest level. Enable value lookup in outer scopes by using collections.ChainMap to implement an ordered lookup from nested to outer scopes. Signed-off-by: Donald Hunter <[email protected]> Reviewed-by: Jiri Pirko <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2024-01-31tools/net/ynl: Add --output-json arg to ynl cliDonald Hunter1-3/+19
The ynl cli currently emits python pretty printed structures which is hard to consume. Add a new --output-json argument to emit JSON. Signed-off-by: Donald Hunter <[email protected]> Reviewed-by: Breno Leitao <[email protected]> Reviewed-by: Jiri Pirko <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2024-01-31selftests: Declare local variable for pause in fcnal-test.shDavid Ahern1-4/+5
Running fcnal-test.sh script with -P argument is causing test failures: $ ./fcnal-test.sh -t ping -P TEST: ping out - ns-B IP [ OK ] hit enter to continue, 'q' to quit fcnal-test.sh: line 106: [: ping: integer expression expected TEST: out, [FAIL] expected rc ping; actual rc 0 hit enter to continue, 'q' to quit The test functions use local variable 'a' for addresses and then log_test is also using 'a' without a local declaration. Fix by declaring a local variable and using 'ans' (for answer) in the read. Signed-off-by: David Ahern <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2024-01-31selftests: net: don't access /dev/stdout in pmtu.shPaolo Abeni1-1/+1
When running the pmtu.sh via the kselftest infra, accessing /dev/stdout gives unexpected results: # dd: failed to open '/dev/stdout': Device or resource busy # TEST: IPv4, bridged vxlan4: PMTU exceptions [FAIL] Let dd use directly the standard output to fix the above: # TEST: IPv4, bridged vxlan4: PMTU exceptions - nexthop objects [ OK ] Fixes: 136a1b434bbb ("selftests: net: test vxlan pmtu exceptions with tcp") Signed-off-by: Paolo Abeni <[email protected]> Reviewed-by: Guillaume Nault <[email protected]> Reviewed-by: David Ahern <[email protected]> Link: https://lore.kernel.org/r/23d7592c5d77d75cff9b34f15c227f92e911c2ae.1706635101.git.pabeni@redhat.com Signed-off-by: Jakub Kicinski <[email protected]>
2024-01-31selftests: net: fix available tunnels detectionPaolo Abeni1-8/+8
The pmtu.sh test tries to detect the tunnel protocols available in the running kernel and properly skip the unsupported cases. In a few more complex setup, such detection is unsuccessful, as the script currently ignores some intermediate error code at setup time. Before: # which: no nettest in (/bin:/sbin:/usr/bin:/usr/sbin:/usr/local/bin) # TEST: vti6: PMTU exceptions (ESP-in-UDP) [FAIL] # PMTU exception wasn't created after creating tunnel exceeding link layer MTU # ./pmtu.sh: line 931: kill: (7543) - No such process # ./pmtu.sh: line 931: kill: (7544) - No such process After: # xfrm4 not supported # TEST: vti4: PMTU exceptions [SKIP] Fixes: ece1278a9b81 ("selftests: net: add ESP-in-UDP PMTU test") Signed-off-by: Paolo Abeni <[email protected]> Reviewed-by: Guillaume Nault <[email protected]> Reviewed-by: David Ahern <[email protected]> Link: https://lore.kernel.org/r/cab10e75fda618e6fff8c595b632f47db58b9309.1706635101.git.pabeni@redhat.com Signed-off-by: Jakub Kicinski <[email protected]>
2024-01-31selftests: net: add missing config for pmtu.sh testsPaolo Abeni1-0/+3
The mentioned test uses a few Kconfig still missing the net config, add them. Before: # Error: Specified qdisc kind is unknown. # Error: Specified qdisc kind is unknown. # Error: Qdisc not classful. # We have an error talking to the kernel # Error: Qdisc not classful. # We have an error talking to the kernel # policy_routing not supported # TEST: ICMPv4 with DSCP and ECN: PMTU exceptions [SKIP] After: # TEST: ICMPv4 with DSCP and ECN: PMTU exceptions [ OK ] Fixes: ec730c3e1f0e ("selftest: net: Test IPv4 PMTU exceptions with DSCP and ECN") Signed-off-by: Paolo Abeni <[email protected]> Reviewed-by: Guillaume Nault <[email protected]> Reviewed-by: David Ahern <[email protected]> Link: https://lore.kernel.org/r/8d27bf6762a5c7b3acc457d6e6872c533040f9c1.1706635101.git.pabeni@redhat.com Signed-off-by: Jakub Kicinski <[email protected]>
Powered by cgit, Gruvboxed by Blaster4385.