| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Trivial conflicts in net/can/isotp.c and
tools/testing/selftests/net/mptcp/mptcp_connect.sh
scaled_ppm_to_ppb() was moved from drivers/ptp/ptp_clock.c
to include/linux/ptp_clock_kernel.h in -next so re-apply
the fix there.
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Networking fixes for 5.13-rc7, including fixes from wireless, bpf,
bluetooth, netfilter and can.
Current release - regressions:
- mlxsw: spectrum_qdisc: Pass handle, not band number to find_class()
to fix modifying offloaded qdiscs
- lantiq: net: fix duplicated skb in rx descriptor ring
- rtnetlink: fix regression in bridge VLAN configuration, empty info
is not an error, bot-generated "fix" was not needed
- libbpf: s/rx/tx/ typo on umem->rx_ring_setup_done to fix umem
creation
Current release - new code bugs:
- ethtool: fix NULL pointer dereference during module EEPROM dump via
the new netlink API
- mlx5e: don't update netdev RQs with PTP-RQ, the special purpose
queue should not be visible to the stack
- mlx5e: select special PTP queue only for SKBTX_HW_TSTAMP skbs
- mlx5e: verify dev is present in get devlink port ndo, avoid a panic
Previous releases - regressions:
- neighbour: allow NUD_NOARP entries to be force GCed
- further fixes for fallout from reorg of WiFi locking (staging:
rtl8723bs, mac80211, cfg80211)
- skbuff: fix incorrect msg_zerocopy copy notifications
- mac80211: fix NULL ptr deref for injected rate info
- Revert "net/mlx5: Arm only EQs with EQEs" it may cause missed IRQs
Previous releases - always broken:
- bpf: more speculative execution fixes
- netfilter: nft_fib_ipv6: skip ipv6 packets from any to link-local
- udp: fix race between close() and udp_abort() resulting in a panic
- fix out of bounds when parsing TCP options before packets are
validated (in netfilter: synproxy, tc: sch_cake and mptcp)
- mptcp: improve operation under memory pressure, add missing
wake-ups
- mptcp: fix double-lock/soft lookup in subflow_error_report()
- bridge: fix races (null pointer deref and UAF) in vlan tunnel
egress
- ena: fix DMA mapping function issues in XDP
- rds: fix memory leak in rds_recvmsg
Misc:
- vrf: allow larger MTUs
- icmp: don't send out ICMP messages with a source address of 0.0.0.0
- cdc_ncm: switch to eth%d interface naming"
* tag 'net-5.13-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (139 commits)
net: ethernet: fix potential use-after-free in ec_bhf_remove
selftests/net: Add icmp.sh for testing ICMP dummy address responses
icmp: don't send out ICMP messages with a source address of 0.0.0.0
net: ll_temac: Avoid ndo_start_xmit returning NETDEV_TX_BUSY
net: ll_temac: Fix TX BD buffer overwrite
net: ll_temac: Add memory-barriers for TX BD access
net: ll_temac: Make sure to free skb when it is completely used
MAINTAINERS: add Guvenc as SMC maintainer
bnxt_en: Call bnxt_ethtool_free() in bnxt_init_one() error path
bnxt_en: Fix TQM fastpath ring backing store computation
bnxt_en: Rediscover PHY capabilities after firmware reset
cxgb4: fix wrong shift.
mac80211: handle various extensible elements correctly
mac80211: reset profile_periodicity/ema_ap
cfg80211: avoid double free of PMSR request
cfg80211: make certificate generation more robust
mac80211: minstrel_ht: fix sample time check
net: qed: Fix memcpy() overflow of qed_dcbx_params()
net: cdc_eem: fix tx fixup skb leak
net: hamradio: fix memory leak in mkiss_close
...
|
|
This patch is meant to start the initiative to document libbpf.
It includes .rst files which are text documentation describing building,
API naming convention, as well as an index to generated API documentation.
In this approach the generated API documentation is enabled by the kernels
existing kernel documentation system which uses sphinx. The resulting docs
would then be synced to kernel.org/doc
You can test this by running `make htmldocs` and serving the html in
Documentation/output. Since libbpf does not yet have comments in kernel
doc format, see kernel.org/doc/html/latest/doc-guide/kernel-doc.html for
an example so you can test this.
The advantage of this approach is to use the existing sphinx
infrastructure that the kernel has, and have libbpf docs in
the same place as everything else.
The current plan is to have the libbpf mirror sync the generated docs
and version them based on the libbpf releases which are cut on github.
This patch includes the addition of libbpf_api.rst which pulls comment
documentation from header files in libbpf under tools/lib/bpf/. The comment
docs would be of the standard kernel doc format.
Signed-off-by: Grant Seltzer <[email protected]>
Signed-off-by: Andrii Nakryiko <[email protected]>
Signed-off-by: Daniel Borkmann <[email protected]>
Link: https://lore.kernel.org/bpf/[email protected]
|
|
This adds a new icmp.sh selftest for testing that the kernel will respond
correctly with an ICMP unreachable message with the dummy (192.0.0.8)
source address when there are no IPv4 addresses configured to use as source
addresses.
Signed-off-by: Toke Høiland-Jørgensen <[email protected]>
Reviewed-by: David Ahern <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
This patch added a new argument "-C" for the mptcp_join.sh script to set
the sysctl checksum_enabled to 1 in ns1 and ns2 to enable the data
checksum.
In chk_join_nr, check the counter of the mib for the data checksum.
Also added a new argument "-S" for the mptcp_join.sh script to start the
test cases that verify the checksum handshake:
* Sender and listener both have checksums off
* Sender and listener both have checksums on
* Sender checksums off, listener checksums on
* Sender checksums on, listener checksums off
The output looks like this:
01 checksum test 0 0 sum[ ok ] - csum [ ok ]
02 checksum test 1 1 sum[ ok ] - csum [ ok ]
03 checksum test 0 1 sum[ ok ] - csum [ ok ]
04 checksum test 1 0 sum[ ok ] - csum [ ok ]
05 no JOIN syn[ ok ] - synack[ ok ] - ack[ ok ]
sum[ ok ] - csum [ ok ]
06 single subflow, limited by client syn[ ok ] - synack[ ok ] - ack[ ok ]
sum[ ok ] - csum [ ok ]
Acked-by: Paolo Abeni <[email protected]>
Signed-off-by: Geliang Tang <[email protected]>
Signed-off-by: Mat Martineau <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
This patch added a new argument "-C" for the mptcp_connect.sh script to
set the sysctl checksum_enabled to 1 in ns1, ns2, ns3 and ns4 to enable
the data checksum.
Acked-by: Paolo Abeni <[email protected]>
Signed-off-by: Geliang Tang <[email protected]>
Signed-off-by: Mat Martineau <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
this selftest is designed for evaluating the new SRv6 End.DT46 Behavior
used, in this example, for implementing IPv4/IPv6 L3 VPN use cases.
Signed-off-by: Andrea Mayer <[email protected]>
Signed-off-by: Paolo Lungaroni <[email protected]>
Acked-by: David Ahern <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
Now the boot-time tracing supports kprobes events and that must be
written in bootconfig file in the following format.
ftrace.event.kprobes.<EVENT_NAME>.probes = <PROBE-DEF>
'perf probe' already supports --definition (-D) action to show probe
definitions, but the format is for tracefs:
[p|r][:EVENT_NAME] <PROBE-DEF>
This patch adds the --bootconfig option for -D action so that it outputs
the probe definitions in bootconfig format. E.g.
$ perf probe --bootconfig -D "path_lookupat:7 err:s32 s:string"
ftrace.event.kprobes.path_lookupat_L7.probe = 'path_lookupat.isra.0+309 err_s32=%ax:s32 s_string=+0(%r13):string'
Signed-off-by: Masami Hiramatsu <[email protected]>
Cc: Alexander Shishkin <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Mark Rutland <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Link: http://lore.kernel.org/lkml/162282412351.452340.14871995440005640114.stgit@devnote2
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
Cleanup synthesize_probe_trace_command() to simplify the code path.
Signed-off-by: Masami Hiramatsu <[email protected]>
Cc: Alexander Shishkin <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Mark Rutland <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Link: http://lore.kernel.org/lkml/162282411361.452340.16886399333622147122.stgit@devnote2
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
'perf probe' internally checks the probe target is in the text area in
post-process (after analyzing debuginfo). But it fails if the probe
target is in the "inittext".
This is a good limitation for the online kernel because such functions
have gone after booting. However, for using it for boot-time tracing,
user may want to put a probe on init functions.
This skips the post checking process if the target is offline kenrel so
that user can get the probe definition on the init functions.
Without this patch:
$ perf probe -k ./build-x86_64/vmlinux -D do_mount_root:10
Probe point 'do_mount_root:10' not found.
Error: Failed to add events.
With this patch:
$ perf probe -k ./build-x86_64/vmlinux -D do_mount_root:10
p:probe/do_mount_root_L10 mount_block_root+300
Signed-off-by: Masami Hiramatsu <[email protected]>
Cc: Alexander Shishkin <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Mark Rutland <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Link: http://lore.kernel.org/lkml/162282410293.452340.13347006295826431632.stgit@devnote2
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
If the test is run on a hypervisor then the cycles event may not be
counted, skip the test in this situation. Fail the test if cycles are
not counted in the subsequent bpf counter run.
Signed-off-by: Ian Rogers <[email protected]>
Cc: Alexander Shishkin <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Mark Rutland <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Song Liu <[email protected]>
Cc: [email protected]
Link: http://lore.kernel.org/lkml/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
Provide additional context for when the stat bpf counters test skips.
Signed-off-by: Ian Rogers <[email protected]>
Cc: Alexander Shishkin <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Mark Rutland <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Song Liu <[email protected]>
Cc: [email protected]
Link: http://lore.kernel.org/lkml/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
The vmlinux ".BTF_ids" ELF section is declared in btf_ids.h to hold a list
of zero-filled BTF IDs, which is then patched at link-time with correct
values by resolv_btfids. The section is flagged as "allocable" to preclude
compression, but notably the section contents (BTF IDs) are untyped.
When patching the BTF IDs, resolve_btfids writes in host-native endianness
and relies on libelf for any required translation on reading and updating
vmlinux. However, since the type of the .BTF_ids section content defaults
to ELF_T_BYTE (i.e. unsigned char), no translation occurs. This results in
incorrect patched values when cross-compiling to non-native endianness,
and can manifest as kernel Oops and test failures which are difficult to
troubleshoot [1].
Explicitly set the type of patched data to ELF_T_WORD, the architecture-
neutral ELF type corresponding to the u32 BTF IDs. This enables libelf to
transparently perform any needed endian conversions.
Fixes: fbbb68de80a4 ("bpf: Add resolve_btfids tool to resolve BTF IDs in ELF object")
Signed-off-by: Tony Ambardar <[email protected]>
Signed-off-by: Daniel Borkmann <[email protected]>
Acked-by: Jiri Olsa <[email protected]>
Cc: Frank Eigler <[email protected]>
Cc: Mark Wielaard <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Yonghong Song <[email protected]>
Link: https://lore.kernel.org/bpf/CAPGftE_eY-Zdi3wBcgDfkz_iOr1KF10n=9mJHm1_a_PykcsoeA@mail.gmail.com [1]
Link: https://lore.kernel.org/bpf/[email protected]
|
|
This release adds following change:
- Fix reporting of memory frequency
Signed-off-by: Srinivas Pandruvada <[email protected]>
Signed-off-by: Hans de Goede <[email protected]>
|
|
The uncore memory frequency value from the mailbox command
CONFIG_TDP_GET_MEM_FREQ needs to be scaled based on the platform for
display. There is no single constant multiplier.
This change introduces CPU model specific memory frequency multiplier.
Signed-off-by: Srinivas Pandruvada <[email protected]>
Signed-off-by: Hans de Goede <[email protected]>
|
|
This commit in sched/urgent moved the cfs_rq_is_decayed() function:
a7b359fc6a37: ("sched/fair: Correctly insert cfs_rq's to list on unthrottle")
and this fresh commit in sched/core modified it in the old location:
9e077b52d86a: ("sched/pelt: Check that *_avg are null when *_sum are")
Merge the two variants.
Conflicts:
kernel/sched/fair.c
Signed-off-by: Ingo Molnar <[email protected]>
|
|
Seems like 4d1b62986125 ("selftests/bpf: Convert few tests to light skeleton.")
and 704e2beba23c ("selftests/bpf: Test ringbuf mmap read-only and read-write
restrictions") were done independently on bpf and bpf-next trees and are in
conflict with each other, despite a clean merge. Fix fetching of ringbuf's
map_fd to use light skeleton properly.
Fixes: 704e2beba23c ("selftests/bpf: Test ringbuf mmap read-only and read-write restrictions")
Fixes: 4d1b62986125 ("selftests/bpf: Convert few tests to light skeleton.")
Signed-off-by: Andrii Nakryiko <[email protected]>
Signed-off-by: Alexei Starovoitov <[email protected]>
Link: https://lore.kernel.org/bpf/[email protected]
|
|
Pull kvm fixes from Paolo Bonzini:
"Miscellaneous bugfixes.
The main interesting one is a NULL pointer dereference reported by
syzkaller ("KVM: x86: Immediately reset the MMU context when the SMM
flag is cleared")"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
KVM: selftests: Fix kvm_check_cap() assertion
KVM: x86/mmu: Calculate and check "full" mmu_role for nested MMU
KVM: X86: Fix x86_emulator slab cache leak
KVM: SVM: Call SEV Guest Decommission if ASID binding fails
KVM: x86: Immediately reset the MMU context when the SMM flag is cleared
KVM: x86: Fix fall-through warnings for Clang
KVM: SVM: fix doc warnings
KVM: selftests: Fix compiling errors when initializing the static structure
kvm: LAPIC: Restore guard to prevent illegal APIC register access
|
|
Daniel Borkmann says:
====================
pull-request: bpf-next 2021-06-17
The following pull-request contains BPF updates for your *net-next* tree.
We've added 50 non-merge commits during the last 25 day(s) which contain
a total of 148 files changed, 4779 insertions(+), 1248 deletions(-).
The main changes are:
1) BPF infrastructure to migrate TCP child sockets from a listener to another
in the same reuseport group/map, from Kuniyuki Iwashima.
2) Add a provably sound, faster and more precise algorithm for tnum_mul() as
noted in https://arxiv.org/abs/2105.05398, from Harishankar Vishwanathan.
3) Streamline error reporting changes in libbpf as planned out in the
'libbpf: the road to v1.0' effort, from Andrii Nakryiko.
4) Add broadcast support to xdp_redirect_map(), from Hangbin Liu.
5) Extends bpf_map_lookup_and_delete_elem() functionality to 4 more map
types, that is, {LRU_,PERCPU_,LRU_PERCPU_,}HASH, from Denis Salopek.
6) Support new LLVM relocations in libbpf to make them more linker friendly,
also add a doc to describe the BPF backend relocations, from Yonghong Song.
7) Silence long standing KUBSAN complaints on register-based shifts in
interpreter, from Daniel Borkmann and Eric Biggers.
8) Add dummy PT_REGS macros in libbpf to fail BPF program compilation when
target arch cannot be determined, from Lorenz Bauer.
9) Extend AF_XDP to support large umems with 1M+ pages, from Magnus Karlsson.
10) Fix two minor libbpf tc BPF API issues, from Kumar Kartikeya Dwivedi.
11) Move libbpf BPF_SEQ_PRINTF/BPF_SNPRINTF macros that can be used by BPF
programs to bpf_helpers.h header, from Florent Revest.
====================
Signed-off-by: David S. Miller <[email protected]>
|
|
Do KVM_GET_NESTED_STATE/KVM_SET_NESTED_STATE for a freshly restored VM
(before the first KVM_RUN) to check that KVM_STATE_NESTED_EVMCS is not
lost.
Reviewed-by: Maxim Levitsky <[email protected]>
Signed-off-by: Vitaly Kuznetsov <[email protected]>
Signed-off-by: Paolo Bonzini <[email protected]>
Message-Id: <[email protected]>
Signed-off-by: Paolo Bonzini <[email protected]>
|
|
The initial implementation of the test only tests that access to Hyper-V
MSRs and hypercalls is in compliance with guest visible CPUID feature bits.
Signed-off-by: Vitaly Kuznetsov <[email protected]>
Signed-off-by: Paolo Bonzini <[email protected]>
Message-Id: <[email protected]>
Signed-off-by: Paolo Bonzini <[email protected]>
|
|
evmcs.h is x86_64 only thing, move it to x86_64/ subdirectory.
Signed-off-by: Vitaly Kuznetsov <[email protected]>
Signed-off-by: Paolo Bonzini <[email protected]>
Message-Id: <[email protected]>
Signed-off-by: Paolo Bonzini <[email protected]>
|
|
These defines can be shared by multiple tests, move them to a dedicated
header.
Signed-off-by: Vitaly Kuznetsov <[email protected]>
Signed-off-by: Paolo Bonzini <[email protected]>
Message-Id: <[email protected]>
Signed-off-by: Paolo Bonzini <[email protected]>
|
|
Standardize reads and writes of the x2APIC MSRs.
Signed-off-by: Jim Mattson <[email protected]>
Reviewed-by: Oliver Upton <[email protected]>
Message-Id: <[email protected]>
Signed-off-by: Paolo Bonzini <[email protected]>
|
|
Move the APIC functions into the library to encourage code reuse and
to avoid unintended deviations.
Signed-off-by: Jim Mattson <[email protected]>
Reviewed-by: Oliver Upton <[email protected]>
Message-Id: <[email protected]>
Signed-off-by: Paolo Bonzini <[email protected]>
|
|
Processor.h is a hodgepodge of definitions. Though the local APIC is
technically built into the CPU these days, move the APIC definitions
into a new header file: apic.h.
Signed-off-by: Jim Mattson <[email protected]>
Reviewed-by: Oliver Upton <[email protected]>
Message-Id: <[email protected]>
Signed-off-by: Paolo Bonzini <[email protected]>
|
|
Test that nested TSC scaling works as expected with both L1 and L2
scaled.
Signed-off-by: Ilias Stamatis <[email protected]>
Reviewed-by: Maxim Levitsky <[email protected]>
Message-Id: <[email protected]>
Signed-off-by: Paolo Bonzini <[email protected]>
|
|
KVM_CHECK_EXTENSION ioctl can return any negative value on error,
and not necessarily -1. Change the assertion to reflect that.
Signed-off-by: Fuad Tabba <[email protected]>
Message-Id: <[email protected]>
Signed-off-by: Paolo Bonzini <[email protected]>
|
|
migrate_reuseport.c selftest relies on having TCP_FASTOPEN_CONNECT defined in
system-wide netinet/tcp.h. Selftests can use up-to-date uapi/linux/tcp.h, but
that one doesn't have SOL_TCP. So instead of switching everything to uapi
header, add #define for TCP_FASTOPEN_CONNECT to fix the build.
Fixes: c9d0bdef89a6 ("bpf: Test BPF_SK_REUSEPORT_SELECT_OR_MIGRATE.")
Signed-off-by: Andrii Nakryiko <[email protected]>
Signed-off-by: Daniel Borkmann <[email protected]>
Acked-by: Kuniyuki Iwashima <[email protected]>
Link: https://lore.kernel.org/bpf/[email protected]
|
|
bpf2go is the Go equivalent of libbpf skeleton. The convention is that
the compiled BPF is checked into the repository to facilitate distributing
BPF as part of Go packages. To make this portable, bpf2go by default
generates both bpfel and bpfeb variants of the C.
Using bpf_tracing.h is inherently non-portable since the fields of
struct pt_regs differ between platforms, so CO-RE can't help us here.
The only way of working around this is to compile for each target
platform independently. bpf2go can't do this by default since there
are too many platforms.
Define the various PT_... macros when no target can be determined and
turn them into compilation failures. This works because bpf2go always
compiles for bpf targets, so the compiler fallback doesn't kick in.
Conditionally define __BPF_MISSING_TARGET so that we can inject a
more appropriate error message at build time. The user can then
choose which platform to target explicitly.
Signed-off-by: Lorenz Bauer <[email protected]>
Signed-off-by: Andrii Nakryiko <[email protected]>
Link: https://lore.kernel.org/bpf/[email protected]
|
|
Somehow test_progs.h was being included by the existing rule:
/test_progs*
This is bad because:
1) test_progs.h is a checked in file
2) grep-like tools like ripgrep[0] respect gitignore and
test_progs.h was being hidden from searches
[0]: https://github.com/BurntSushi/ripgrep
Fixes: 74b5a5968fe8 ("selftests/bpf: Replace test_progs and test_maps w/ general rule")
Signed-off-by: Daniel Xu <[email protected]>
Signed-off-by: Andrii Nakryiko <[email protected]>
Link: https://lore.kernel.org/bpf/a46f64944bf678bc652410ca6028d3450f4f7f4b.1623880296.git.dxu@dxuuu.xyz
|
|
udpgro_fwd.sh contains many bash specific operators ("[[", "local -r"),
but it's using /bin/sh; in some distro /bin/sh is mapped to /bin/dash,
that doesn't support such operators.
Force the test to use /bin/bash explicitly and prevent false positive
test failures.
Signed-off-by: Andrea Righi <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
veth.sh is a shell script that uses /bin/sh; some distro (Ubuntu for
example) use dash as /bin/sh and in this case the test reports the
following error:
# ./veth.sh: 21: local: -r: bad variable name
# ./veth.sh: 21: local: -r: bad variable name
This happens because dash doesn't support the option "-r" with local.
Moreover, in case of missing bpf object, the script is exiting -1, that
is an illegal number for dash:
exit: Illegal number: -1
Change the script to be compatible both with bash and dash and prevent
the errors above.
Signed-off-by: Andrea Righi <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
The "auxtrace_info" and "auxtrace" functions are not set in "tool" member of
"annotate". As a result, perf annotate does not support parsing itrace data.
Before:
# perf record -e arm_spe_0/branch_filter=1/ -a sleep 1
[ perf record: Woken up 9 times to write data ]
[ perf record: Captured and wrote 20.874 MB perf.data ]
# perf annotate --stdio
Error:
The perf.data data has no samples!
Solution:
1. Add itrace options in help,
2. Set hook functions of "id_index", "auxtrace_info" and "auxtrace" in perf_tool.
After:
# perf record --all-user -e arm_spe_0/branch_filter=1/ ls
Couldn't synthesize bpf events.
perf.data
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.010 MB perf.data ]
# perf annotate --stdio
Percent | Source code & Disassembly of libc-2.28.so for branch-miss (1 samples, percent: local period)
------------------------------------------------------------------------------------------------------------
:
:
:
: Disassembly of section .text:
:
: 0000000000066180 <__getdelim@@GLIBC_2.17>:
0.00 : 66180: stp x29, x30, [sp, #-96]!
0.00 : 66184: cmp x0, #0x0
0.00 : 66188: ccmp x1, #0x0, #0x4, ne // ne = any
0.00 : 6618c: mov x29, sp
0.00 : 66190: stp x24, x25, [sp, #56]
0.00 : 66194: stp x26, x27, [sp, #72]
0.00 : 66198: str x28, [sp, #88]
0.00 : 6619c: b.eq 66450 <__getdelim@@GLIBC_2.17+0x2d0> // b.none
0.00 : 661a0: stp x22, x23, [x29, #40]
0.00 : 661a4: mov x22, x1
0.00 : 661a8: ldr w1, [x3]
0.00 : 661ac: mov w23, w2
0.00 : 661b0: stp x20, x21, [x29, #24]
0.00 : 661b4: mov x20, x3
0.00 : 661b8: mov x21, x0
0.00 : 661bc: tbnz w1, #15, 66360 <__getdelim@@GLIBC_2.17+0x1e0>
0.00 : 661c0: ldr x0, [x3, #136]
0.00 : 661c4: ldr x2, [x0, #8]
0.00 : 661c8: str x19, [x29, #16]
0.00 : 661cc: mrs x19, tpidr_el0
0.00 : 661d0: sub x19, x19, #0x700
0.00 : 661d4: cmp x2, x19
0.00 : 661d8: b.eq 663f0 <__getdelim@@GLIBC_2.17+0x270> // b.none
0.00 : 661dc: mov w1, #0x1 // #1
0.00 : 661e0: ldaxr w2, [x0]
0.00 : 661e4: cmp w2, #0x0
0.00 : 661e8: b.ne 661f4 <__getdelim@@GLIBC_2.17+0x74> // b.any
0.00 : 661ec: stxr w3, w1, [x0]
0.00 : 661f0: cbnz w3, 661e0 <__getdelim@@GLIBC_2.17+0x60>
0.00 : 661f4: b.ne 66448 <__getdelim@@GLIBC_2.17+0x2c8> // b.any
0.00 : 661f8: ldr x0, [x20, #136]
0.00 : 661fc: ldr w1, [x20]
0.00 : 66200: ldr w2, [x0, #4]
0.00 : 66204: str x19, [x0, #8]
0.00 : 66208: add w2, w2, #0x1
0.00 : 6620c: str w2, [x0, #4]
0.00 : 66210: tbnz w1, #5, 66388 <__getdelim@@GLIBC_2.17+0x208>
0.00 : 66214: ldr x19, [x29, #16]
0.00 : 66218: ldr x0, [x21]
0.00 : 6621c: cbz x0, 66228 <__getdelim@@GLIBC_2.17+0xa8>
0.00 : 66220: ldr x0, [x22]
0.00 : 66224: cbnz x0, 6623c <__getdelim@@GLIBC_2.17+0xbc>
0.00 : 66228: mov x0, #0x78 // #120
0.00 : 6622c: str x0, [x22]
0.00 : 66230: bl 20710 <malloc@plt>
0.00 : 66234: str x0, [x21]
0.00 : 66238: cbz x0, 66428 <__getdelim@@GLIBC_2.17+0x2a8>
0.00 : 6623c: ldr x27, [x20, #8]
0.00 : 66240: str x19, [x29, #16]
0.00 : 66244: ldr x19, [x20, #16]
0.00 : 66248: sub x19, x19, x27
0.00 : 6624c: cmp x19, #0x0
0.00 : 66250: b.le 66398 <__getdelim@@GLIBC_2.17+0x218>
0.00 : 66254: mov x25, #0x0 // #0
0.00 : 66258: b 662d8 <__getdelim@@GLIBC_2.17+0x158>
0.00 : 6625c: nop
0.00 : 66260: add x24, x19, x25
0.00 : 66264: ldr x3, [x22]
0.00 : 66268: add x26, x24, #0x1
0.00 : 6626c: ldr x0, [x21]
0.00 : 66270: cmp x3, x26
0.00 : 66274: b.cs 6629c <__getdelim@@GLIBC_2.17+0x11c> // b.hs, b.nlast
0.00 : 66278: lsl x3, x3, #1
0.00 : 6627c: cmp x3, x26
0.00 : 66280: csel x26, x3, x26, cs // cs = hs, nlast
0.00 : 66284: mov x1, x26
0.00 : 66288: bl 206f0 <realloc@plt>
0.00 : 6628c: cbz x0, 66438 <__getdelim@@GLIBC_2.17+0x2b8>
0.00 : 66290: str x0, [x21]
0.00 : 66294: ldr x27, [x20, #8]
0.00 : 66298: str x26, [x22]
0.00 : 6629c: mov x2, x19
0.00 : 662a0: mov x1, x27
0.00 : 662a4: add x0, x0, x25
0.00 : 662a8: bl 87390 <explicit_bzero@@GLIBC_2.25+0x50>
0.00 : 662ac: ldr x0, [x20, #8]
0.00 : 662b0: add x19, x0, x19
0.00 : 662b4: str x19, [x20, #8]
0.00 : 662b8: cbnz x28, 66410 <__getdelim@@GLIBC_2.17+0x290>
0.00 : 662bc: mov x0, x20
0.00 : 662c0: bl 73b80 <__underflow@@GLIBC_2.17>
0.00 : 662c4: cmn w0, #0x1
0.00 : 662c8: b.eq 66410 <__getdelim@@GLIBC_2.17+0x290> // b.none
0.00 : 662cc: ldp x27, x19, [x20, #8]
0.00 : 662d0: mov x25, x24
0.00 : 662d4: sub x19, x19, x27
0.00 : 662d8: mov x2, x19
0.00 : 662dc: mov w1, w23
0.00 : 662e0: mov x0, x27
0.00 : 662e4: bl 807b0 <memchr@@GLIBC_2.17>
0.00 : 662e8: cmp x0, #0x0
0.00 : 662ec: mov x28, x0
0.00 : 662f0: sub x0, x0, x27
0.00 : 662f4: csinc x19, x19, x0, eq // eq = none
0.00 : 662f8: mov x0, #0x7fffffffffffffff // #9223372036854775807
0.00 : 662fc: sub x0, x0, x25
0.00 : 66300: cmp x19, x0
0.00 : 66304: b.lt 66260 <__getdelim@@GLIBC_2.17+0xe0> // b.tstop
0.00 : 66308: adrp x0, 17f000 <sys_sigabbrev@@GLIBC_2.17+0x320>
0.00 : 6630c: ldr x0, [x0, #3624]
0.00 : 66310: mrs x2, tpidr_el0
0.00 : 66314: ldr x19, [x29, #16]
0.00 : 66318: mov w3, #0x4b // #75
0.00 : 6631c: ldr w1, [x20]
0.00 : 66320: mov x24, #0xffffffffffffffff // #-1
0.00 : 66324: str w3, [x2, x0]
0.00 : 66328: tbnz w1, #15, 66340 <__getdelim@@GLIBC_2.17+0x1c0>
0.00 : 6632c: ldr x0, [x20, #136]
0.00 : 66330: ldr w1, [x0, #4]
0.00 : 66334: sub w1, w1, #0x1
0.00 : 66338: str w1, [x0, #4]
0.00 : 6633c: cbz w1, 663b8 <__getdelim@@GLIBC_2.17+0x238>
0.00 : 66340: mov x0, x24
0.00 : 66344: ldr x28, [sp, #88]
0.00 : 66348: ldp x20, x21, [x29, #24]
0.00 : 6634c: ldp x22, x23, [x29, #40]
0.00 : 66350: ldp x24, x25, [sp, #56]
0.00 : 66354: ldp x26, x27, [sp, #72]
0.00 : 66358: ldp x29, x30, [sp], #96
0.00 : 6635c: ret
100.00 : 66360: tbz w1, #5, 66218 <__getdelim@@GLIBC_2.17+0x98>
0.00 : 66364: ldp x20, x21, [x29, #24]
0.00 : 66368: mov x24, #0xffffffffffffffff // #-1
0.00 : 6636c: ldp x22, x23, [x29, #40]
0.00 : 66370: mov x0, x24
0.00 : 66374: ldp x24, x25, [sp, #56]
0.00 : 66378: ldp x26, x27, [sp, #72]
0.00 : 6637c: ldr x28, [sp, #88]
0.00 : 66380: ldp x29, x30, [sp], #96
0.00 : 66384: ret
0.00 : 66388: mov x24, #0xffffffffffffffff // #-1
0.00 : 6638c: ldr x19, [x29, #16]
0.00 : 66390: b 66328 <__getdelim@@GLIBC_2.17+0x1a8>
0.00 : 66394: nop
0.00 : 66398: mov x0, x20
0.00 : 6639c: bl 73b80 <__underflow@@GLIBC_2.17>
0.00 : 663a0: cmn w0, #0x1
0.00 : 663a4: b.eq 66438 <__getdelim@@GLIBC_2.17+0x2b8> // b.none
0.00 : 663a8: ldp x27, x19, [x20, #8]
0.00 : 663ac: sub x19, x19, x27
0.00 : 663b0: b 66254 <__getdelim@@GLIBC_2.17+0xd4>
0.00 : 663b4: nop
0.00 : 663b8: str xzr, [x0, #8]
0.00 : 663bc: ldxr w2, [x0]
0.00 : 663c0: stlxr w3, w1, [x0]
0.00 : 663c4: cbnz w3, 663bc <__getdelim@@GLIBC_2.17+0x23c>
0.00 : 663c8: cmp w2, #0x1
0.00 : 663cc: b.le 66340 <__getdelim@@GLIBC_2.17+0x1c0>
0.00 : 663d0: mov x1, #0x81 // #129
0.00 : 663d4: mov x2, #0x1 // #1
0.00 : 663d8: mov x3, #0x0 // #0
0.00 : 663dc: mov x8, #0x62 // #98
0.00 : 663e0: svc #0x0
0.00 : 663e4: ldp x20, x21, [x29, #24]
0.00 : 663e8: ldp x22, x23, [x29, #40]
0.00 : 663ec: b 66370 <__getdelim@@GLIBC_2.17+0x1f0>
0.00 : 663f0: ldr w2, [x0, #4]
0.00 : 663f4: add w2, w2, #0x1
0.00 : 663f8: str w2, [x0, #4]
0.00 : 663fc: tbz w1, #5, 66214 <__getdelim@@GLIBC_2.17+0x94>
0.00 : 66400: mov x24, #0xffffffffffffffff // #-1
0.00 : 66404: ldr x19, [x29, #16]
0.00 : 66408: b 66330 <__getdelim@@GLIBC_2.17+0x1b0>
0.00 : 6640c: nop
0.00 : 66410: ldr x0, [x21]
0.00 : 66414: strb wzr, [x0, x24]
0.00 : 66418: ldr w1, [x20]
0.00 : 6641c: ldr x19, [x29, #16]
0.00 : 66420: b 66328 <__getdelim@@GLIBC_2.17+0x1a8>
0.00 : 66424: nop
0.00 : 66428: mov x24, #0xffffffffffffffff // #-1
0.00 : 6642c: ldr w1, [x20]
0.00 : 66430: b 66328 <__getdelim@@GLIBC_2.17+0x1a8>
0.00 : 66434: nop
0.00 : 66438: mov x24, #0xffffffffffffffff // #-1
0.00 : 6643c: ldr w1, [x20]
0.00 : 66440: ldr x19, [x29, #16]
0.00 : 66444: b 66328 <__getdelim@@GLIBC_2.17+0x1a8>
0.00 : 66448: bl e3ba0 <pthread_setcanceltype@@GLIBC_2.17+0x30>
0.00 : 6644c: b 661f8 <__getdelim@@GLIBC_2.17+0x78>
0.00 : 66450: adrp x0, 17f000 <sys_sigabbrev@@GLIBC_2.17+0x320>
0.00 : 66454: ldr x0, [x0, #3624]
0.00 : 66458: mrs x1, tpidr_el0
0.00 : 6645c: mov w2, #0x16 // #22
0.00 : 66460: mov x24, #0xffffffffffffffff // #-1
0.00 : 66464: str w2, [x1, x0]
0.00 : 66468: b 66370 <__getdelim@@GLIBC_2.17+0x1f0>
0.00 : 6646c: ldr w1, [x20]
0.00 : 66470: mov x4, x0
0.00 : 66474: tbnz w1, #15, 6648c <__getdelim@@GLIBC_2.17+0x30c>
0.00 : 66478: ldr x0, [x20, #136]
0.00 : 6647c: ldr w1, [x0, #4]
0.00 : 66480: sub w1, w1, #0x1
0.00 : 66484: str w1, [x0, #4]
0.00 : 66488: cbz w1, 66494 <__getdelim@@GLIBC_2.17+0x314>
0.00 : 6648c: mov x0, x4
0.00 : 66490: bl 20e40 <gnu_get_libc_version@@GLIBC_2.17+0x130>
0.00 : 66494: str xzr, [x0, #8]
0.00 : 66498: ldxr w2, [x0]
0.00 : 6649c: stlxr w3, w1, [x0]
0.00 : 664a0: cbnz w3, 66498 <__getdelim@@GLIBC_2.17+0x318>
0.00 : 664a4: cmp w2, #0x1
0.00 : 664a8: b.le 6648c <__getdelim@@GLIBC_2.17+0x30c>
0.00 : 664ac: mov x1, #0x81 // #129
0.00 : 664b0: mov x2, #0x1 // #1
0.00 : 664b4: mov x3, #0x0 // #0
0.00 : 664b8: mov x8, #0x62 // #98
0.00 : 664bc: svc #0x0
0.00 : 664c0: b 6648c <__getdelim@@GLIBC_2.17+0x30c>
Signed-off-by: Yang Jihong <[email protected]>
Tested-by: Leo Yan <[email protected]>
Acked-by: Adrian Hunter <[email protected]>
Cc: Alexander Shishkin <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Mark Rutland <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Link: http://lore.kernel.org/lkml/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
Remove duplicate '#undef E'.
Signed-off-by: Li Huafei <[email protected]>
Cc: Alexander Shishkin <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Kan Liang <[email protected]>
Cc: Mark Rutland <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Zhang Jinhao <[email protected]>
Link: http://lore.kernel.org/lkml/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
With the MMCR0 control bit (PMCCEXT) in ISA v3.1, read access to
group B registers is restricted when MMCR0 PMCC=0b00. In other
platforms (like power9), the older behaviour works where group B
PMU SPRs are readable.
Patch creates a selftest which verifies that the test takes a
SIGILL when attempting to read PMU registers via helper function
"dump_ebb_state" for ISA v3.1.
Signed-off-by: Athira Rajeev <[email protected]>
Tested-by: Nageswara R Sastry <[email protected] <mailto:[email protected]>>
Signed-off-by: Michael Ellerman <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
|
|
The "no_handler_test" in ebb selftests attempts to read the PMU
registers twice via helper function "dump_ebb_state". First dump is
just before closing of event and the second invocation is done after
closing of the event. The original intention of second
dump_ebb_state was to dump the state of registers at the end of
the test when the counters are frozen. But this will be achieved
with the first call itself since sample period is set to low value
and PMU will be frozen by then. Hence patch removes the
dump which was done before closing of the event.
Reported-by: Shirisha Ganta <[email protected]>
Signed-off-by: Athira Rajeev <[email protected]>
Tested-by: Nageswara R Sastry <[email protected] <mailto:[email protected]>>
Signed-off-by: Michael Ellerman <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
|
|
gettid() is 10% lighter than getppid(), use it for null_syscall selftest.
Signed-off-by: Christophe Leroy <[email protected]>
Signed-off-by: Michael Ellerman <[email protected]>
Link: https://lore.kernel.org/r/0ad62673d3e063f848e7c99d719bb966efd433e8.1622809833.git.christophe.leroy@csgroup.eu
|
|
Extend the enclave to have two operations: ENCL_OP_PUT and ENCL_OP_GET.
ENCL_OP_PUT stores value inside the enclave address space and
ENCL_OP_GET reads it. The internal buffer can be later extended to be
variable size, and allow reclaimer tests.
Signed-off-by: Jarkko Sakkinen <[email protected]>
Signed-off-by: Shuah Khan <[email protected]>
|
|
Add EXPECT_EEXIT() macro, which will conditionally print the exception
information, in addition to
EXPECT_EQ(self->run.function, EEXIT);
Signed-off-by: Jarkko Sakkinen <[email protected]>
Signed-off-by: Shuah Khan <[email protected]>
|
|
Often, it's useful to check whether /proc/self/maps looks sane when
dealing with memory mapped objects, especially when they are JIT'ish
dynamically constructed objects. Therefore, dump "/dev/sgx_enclave"
matching lines from the memory map in FIXTURE_SETUP().
Signed-off-by: Jarkko Sakkinen <[email protected]>
Signed-off-by: Shuah Khan <[email protected]>
|
|
Daniel Borkmann says:
====================
pull-request: bpf 2021-06-15
The following pull-request contains BPF updates for your *net* tree.
We've added 5 non-merge commits during the last 11 day(s) which contain
a total of 10 files changed, 115 insertions(+), 16 deletions(-).
The main changes are:
1) Fix marking incorrect umem ring as done in libbpf's
xsk_socket__create_shared() helper, from Kev Jackson.
2) Fix oob leakage under a spectre v1 type confusion
attack, from Daniel Borkmann.
====================
Signed-off-by: David S. Miller <[email protected]>
|
|
Migrate to kselftest harness. Use a fixture test with enclave initialized
and de-initialized for each of the existing three tests, in other words:
1. One FIXTURE() for managing the enclave life-cycle.
2. Three TEST_F()'s, one for each test case.
Dump lines of /proc/self/maps matching "sgx" in FIXTURE_SETUP() as this
can be very useful debugging information later on.
Amended commit log:
This migration changes the output of this test. Instead of skipping
the tests if open /dev/sgx_enclave fails, it will run all the tests
and report failures on all of them.
Shuah Khan <[email protected]>
Signed-off-by: Jarkko Sakkinen <[email protected]>
Signed-off-by: Shuah Khan <[email protected]>
|
|
Rename symbols for better clarity:
* 'eenter' might be confused for directly calling ENCLU[EENTER]. It does
not. It calls into the VDSO, which actually has the EENTER instruction.
* 'sgx_call_vdso' is *only* used for entering the enclave. It's not some
generic SGX call into the VDSO.
Signed-off-by: Jarkko Sakkinen <[email protected]>
Signed-off-by: Shuah Khan <[email protected]>
|
|
This patch adds a test for BPF_SK_REUSEPORT_SELECT_OR_MIGRATE and
removes 'static' from settimeo() in network_helpers.c.
Signed-off-by: Kuniyuki Iwashima <[email protected]>
Signed-off-by: Daniel Borkmann <[email protected]>
Reviewed-by: Eric Dumazet <[email protected]>
Acked-by: Martin KaFai Lau <[email protected]>
Link: https://lore.kernel.org/bpf/[email protected]
|
|
This commit introduces a new section (sk_reuseport/migrate) and sets
expected_attach_type to two each section in BPF_PROG_TYPE_SK_REUSEPORT
program.
Signed-off-by: Kuniyuki Iwashima <[email protected]>
Signed-off-by: Daniel Borkmann <[email protected]>
Reviewed-by: Eric Dumazet <[email protected]>
Acked-by: Martin KaFai Lau <[email protected]>
Link: https://lore.kernel.org/bpf/[email protected]
|
|
This patch introduces a new bpf_attach_type for BPF_PROG_TYPE_SK_REUSEPORT
to check if the attached eBPF program is capable of migrating sockets. When
the eBPF program is attached, we run it for socket migration if the
expected_attach_type is BPF_SK_REUSEPORT_SELECT_OR_MIGRATE or
net.ipv4.tcp_migrate_req is enabled.
Currently, the expected_attach_type is not enforced for the
BPF_PROG_TYPE_SK_REUSEPORT type of program. Thus, this commit follows the
earlier idea in the commit aac3fc320d94 ("bpf: Post-hooks for sys_bind") to
fix up the zero expected_attach_type in bpf_prog_load_fixup_attach_type().
Moreover, this patch adds a new field (migrating_sk) to sk_reuseport_md to
select a new listener based on the child socket. migrating_sk varies
depending on if it is migrating a request in the accept queue or during
3WHS.
- accept_queue : sock (ESTABLISHED/SYN_RECV)
- 3WHS : request_sock (NEW_SYN_RECV)
In the eBPF program, we can select a new listener by
BPF_FUNC_sk_select_reuseport(). Also, we can cancel migration by returning
SK_DROP. This feature is useful when listeners have different settings at
the socket API level or when we want to free resources as soon as possible.
- SK_PASS with selected_sk, select it as a new listener
- SK_PASS with selected_sk NULL, fallbacks to the random selection
- SK_DROP, cancel the migration.
There is a noteworthy point. We select a listening socket in three places,
but we do not have struct skb at closing a listener or retransmitting a
SYN+ACK. On the other hand, some helper functions do not expect skb is NULL
(e.g. skb_header_pointer() in BPF_FUNC_skb_load_bytes(), skb_tail_pointer()
in BPF_FUNC_skb_load_bytes_relative()). So we allocate an empty skb
temporarily before running the eBPF program.
Suggested-by: Martin KaFai Lau <[email protected]>
Signed-off-by: Kuniyuki Iwashima <[email protected]>
Signed-off-by: Daniel Borkmann <[email protected]>
Reviewed-by: Eric Dumazet <[email protected]>
Acked-by: Martin KaFai Lau <[email protected]>
Link: https://lore.kernel.org/netdev/[email protected]/
Link: https://lore.kernel.org/netdev/[email protected]/
Link: https://lore.kernel.org/netdev/[email protected]/
Link: https://lore.kernel.org/bpf/[email protected]
|
|
We will call sock_reuseport.prog for socket migration in the next commit,
so the eBPF program has to know which listener is closing to select a new
listener.
We can currently get a unique ID of each listener in the userspace by
calling bpf_map_lookup_elem() for BPF_MAP_TYPE_REUSEPORT_SOCKARRAY map.
This patch makes the pointer of sk available in sk_reuseport_md so that we
can get the ID by BPF_FUNC_get_socket_cookie() in the eBPF program.
Suggested-by: Martin KaFai Lau <[email protected]>
Signed-off-by: Kuniyuki Iwashima <[email protected]>
Signed-off-by: Daniel Borkmann <[email protected]>
Reviewed-by: Eric Dumazet <[email protected]>
Acked-by: Martin KaFai Lau <[email protected]>
Link: https://lore.kernel.org/netdev/[email protected]/
Link: https://lore.kernel.org/bpf/[email protected]
|
|
Merge our fixes branch which has a number of important fixes, notably
the fix for initrd corruption, as well as the fixes for scv vs ptrace.
|
|
This got lost during the refactoring across versions. We always use
NLM_F_EXCL when creating some TC object, so reflect what the function
says and set the flag.
Fixes: 715c5ce454a6 ("libbpf: Add low level TC-BPF management API")
Signed-off-by: Kumar Kartikeya Dwivedi <[email protected]>
Signed-off-by: Daniel Borkmann <[email protected]>
Link: https://lore.kernel.org/bpf/[email protected]
|