| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Also do shellcheck cleanups here, no functional changes intended.
When running tests via vng tool, the packetpath insertion test fails:
dd: failed to open '/dev/stdout': Device or resource busy
Just omit 'of=' and this will work as intended.
Signed-off-by: Florian Westphal <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
use checktool helper where applicable.
Signed-off-by: Florian Westphal <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
No functional change intended. Disable frequent shellcheck warnings wrt.
"unreachable" code, those helpers get called indirectly from busywait helper.
Signed-off-by: Florian Westphal <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
- switch to socat, like other tests
- use buswait helper to test once listener netns is ready
- do not generate multiple input test files, only generate
one and use cleanup hook to remove it, like other temporary files.
Signed-off-by: Florian Westphal <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
This patch uses public helper connect_to_addr() exported in
network_helpers.h instead of the local defined function connect_to_server()
in prog_tests/sk_assign.c. This can avoid duplicate code.
The code that sets SO_SNDTIMEO timeout as timeo_sec (3s) can be dropped,
since connect_to_addr() sets default timeout as 3s.
Signed-off-by: Geliang Tang <[email protected]>
Link: https://lore.kernel.org/r/98fdd384872bda10b2adb052e900a2212c9047b9.1713427236.git.tanggeliang@kylinos.cn
Signed-off-by: Martin KaFai Lau <[email protected]>
|
|
This patch uses public helper connect_to_addr() exported in
network_helpers.h instead of the local defined function connect_to_server()
in prog_tests/cls_redirect.c. This can avoid duplicate code.
Signed-off-by: Geliang Tang <[email protected]>
Link: https://lore.kernel.org/r/4a03ac92d2d392f8721f398fa449a83ac75577bc.1713427236.git.tanggeliang@kylinos.cn
Signed-off-by: Martin KaFai Lau <[email protected]>
|
|
Move the third argument "int type" of connect_to_addr() to the first one
which is closer to how the socket syscall is doing it. And add a
network_helper_opts argument as the fourth one. Then change its usages in
sock_addr.c too.
Signed-off-by: Geliang Tang <[email protected]>
Link: https://lore.kernel.org/r/088ea8a95055f93409c5f57d12f0e58d43059ac4.1713427236.git.tanggeliang@kylinos.cn
Signed-off-by: Martin KaFai Lau <[email protected]>
|
|
Include network_helpers.h in prog_tests/sk_assign.c, use the newly
added public helper start_server_addr() instead of the local defined
function start_server(). This can avoid duplicate code.
The code that sets SO_RCVTIMEO timeout as timeo_sec (3s) can be dropped,
since start_server_addr() sets default timeout as 3s.
Signed-off-by: Geliang Tang <[email protected]>
Link: https://lore.kernel.org/r/2af706ffbad63b4f7eaf93a426ed1076eadf1a05.1713427236.git.tanggeliang@kylinos.cn
Signed-off-by: Martin KaFai Lau <[email protected]>
|
|
Include network_helpers.h in prog_tests/cls_redirect.c, use the newly
added public helper start_server_addr() instead of the local defined
function start_server(). This can avoid duplicate code.
Signed-off-by: Geliang Tang <[email protected]>
Link: https://lore.kernel.org/r/13f336cb4c6680175d50bb963d9532e11528c758.1713427236.git.tanggeliang@kylinos.cn
Signed-off-by: Martin KaFai Lau <[email protected]>
|
|
In order to pair up with connect_to_addr(), this patch adds a new helper
start_server_addr(), which is a wrapper of __start_server(). It accepts
an argument 'addr' of 'struct sockaddr_storage' type instead of a string
type argument like start_server(), and a network_helper_opts argument as
the last one.
Signed-off-by: Geliang Tang <[email protected]>
Link: https://lore.kernel.org/r/2f01d48fa026467926738debe554ac452c19b86f.1713427236.git.tanggeliang@kylinos.cn
Signed-off-by: Martin KaFai Lau <[email protected]>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/perf/perf-tools
Pull perf tools fixes from Namhyung Kim:
"A random set of small bug fixes:
- Fix perf annotate TUI when used with data type profiling
- Work around BPF verifier about sighand lock checking
And a set of kernel header synchronization"
* tag 'perf-tools-fixes-for-v6.9-2024-04-19' of git://git.kernel.org/pub/scm/linux/kernel/git/perf/perf-tools:
tools/include: Sync arm64 asm/cputype.h with the kernel sources
tools/include: Sync asm-generic/bitops/fls.h with the kernel sources
tools/include: Sync x86 asm/msr-index.h with the kernel sources
tools/include: Sync x86 asm/irq_vectors.h with the kernel sources
tools/include: Sync x86 CPU feature headers with the kernel sources
tools/include: Sync uapi/sound/asound.h with the kernel sources
tools/include: Sync uapi/linux/kvm.h and asm/kvm.h with the kernel sources
tools/include: Sync uapi/linux/fs.h with the kernel sources
tools/include: Sync uapi/drm/i915_drm.h with the kernel sources
perf lock contention: Add a missing NULL check
perf annotate: Make sure to call symbol__annotate2() in TUI
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jgg/iommufd
Pull iommufd fixes from Jason Gunthorpe:
"Two fixes for the selftests:
- CONFIG_IOMMUFD_TEST needs CONFIG_IOMMUFD_DRIVER to work
- The kconfig fragment sshould include fault injection so the fault
injection test can work"
* tag 'for-linus-iommufd' of git://git.kernel.org/pub/scm/linux/kernel/git/jgg/iommufd:
iommufd: Add config needed for iommufd_fail_nth
iommufd: Add missing IOMMUFD_DRIVER kconfig for the selftest
|
|
Pull fix for SEV-SNP late disable bugs.
Signed-off-by: Paolo Bonzini <[email protected]>
|
|
conditional defines"
This reverts commit a672af9139a843eb7a48fd7846bb6df8f81b5f86.
By now it is not used for building tools/perf, but Stephen Rothwell
reported that when building on a O= directory that had been built with
torvalds/master and this perf build command line:
$ make -C tools/perf -f Makefile.perf -s -O -j60 O=/home/sfr/next/perf NO_BPF_SKEL=1
If we then merge perf-tools-next, as he did for linux-next, then we end
up with a build failure for libbpf:
PERF_VERSION = 6.9.rc3.g42c4635c8dee
make[3]: *** No rule to make target '/home/sfr/next/next/tools/include/uapi/linux/stat.h', needed by '/home/sfr/next/perf/libbpf/staticobjs/libbpf.o'. Stop.
make[2]: *** [Makefile:157: /home/sfr/next/perf/libbpf/staticobjs/libbpf-in.o] Error 2
make[1]: *** [Makefile.perf:892: /home/sfr/next/perf/libbpf/libbpf.a] Error 2
make[1]: *** Waiting for unfinished jobs....
make: *** [Makefile.perf:264: sub-make] Error 2
This needs to be further investigated to figure out how to check if
libbpf really needs something that is in that
tools/include/uapi/linux/stat.h file and if not to remove that file in a
way that we don't break the build in any situation, to avoid requiring
doing a 'make clean'.
Reported-by: Stephen Rothwell <[email protected]>
Tested-by: Stephen Rothwell <[email protected]> # PowerPC le incermental build
Cc: Namhyung Kim <[email protected]>
Link: https://lore.kernel.org/lkml/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
This is a common failure mode when probing userspace C++ code (where the
mangling adds significant length to the symbol names).
Prior to this patch, only a very generic error message is produced,
making the user guess at what the issue is.
Signed-off-by: Dima Kogan <[email protected]>
Acked-by: Masami Hiramatsu <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
In several places we had
char buf[64];
...
snprintf(buf, 64, ...);
This patch changes it to
char buf[64];
...
snprintf(buf, sizeof(buf), ...);
so the "64" is only stated once.
Signed-off-by: Dima Kogan <[email protected]>
Acked-by: Masami Hiramatsu <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
Hardware counter and event information could be used to help creating event
groups that better utilize hardware counters and improve multiplexing.
Reviewed-by: Ian Rogers <[email protected]>
Signed-off-by: Weilin Wang <[email protected]>
Cc: Adrian Hunter <[email protected]>
Cc: Alexander Shishkin <[email protected]>
Cc: Caleb Biggers <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Kan Liang <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Perry Taylor <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Samantha Alt <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
These tests record in a mode that includes kernel trace but look for
samples of a userspace process. This makes them sensitive to any kernel
compilation options that increase the amount of time spent in the
kernel. If the trace buffer is completely filled before userspace is
reached then the test will fail. Double the buffer size to fix this.
The other tests in the same file aren't sensitive to this for various
reasons, for example the iterate devices test filters by userspace trace
only. But in order to keep coverage of all the modes, increase the
buffer size rather than filtering by userspace for the basic tests.
Fixes: d1efa4a0a696e487 ("perf cs-etm: Add separate decode paths for timeless and per-thread modes")
Reviewed-by: Anshuman Khandual <[email protected]>
Signed-off-by: James Clark <[email protected]>
Cc: Adrian Hunter <[email protected]>
Cc: Alexander Shishkin <[email protected]>
Cc: Ian Rogers <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: James Clark <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Mark Rutland <[email protected]>
Cc: Mike Leach <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Suzuki Poulouse <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
When cross-compiling perf with libelf, the following error occurred:
In file included from tests/genelf.c:14:
tests/../util/genelf.h:50:2: error: #error "unsupported architecture"
50 | #error "unsupported architecture"
| ^~~~~
tests/../util/genelf.h:59:5: warning: "GEN_ELF_CLASS" is not defined, evaluates to 0 [-Wundef]
59 | #if GEN_ELF_CLASS == ELFCLASS64
Fix this by adding GEN-ELF-ARCH and GEN-ELF-CLASS definitions for rv32.
Reviewed-by: Ian Rogers <[email protected]>
Signed-off-by: Chen Pei <[email protected]>
Cc: Albert Ou <[email protected]>
Cc: Palmer Dabbelt <[email protected]>
Cc: Paul Walmsley <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
impacted by errata
L1D_CACHE_INVAL overcounts in certain situations. See AC03_CPU_41 and
AC04_CPU_1 for more details. Mark the event impacted by the errata.
Reviewed-by: James Clark <[email protected]>
Signed-off-by: Ilkka Koskinen <[email protected]>
Cc: Adrian Hunter <[email protected]>
Cc: Alexander Shishkin <[email protected]>
Cc: Ian Rogers <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: John Garry <[email protected]>
Cc: Leo Yan <[email protected]>
Cc: Mark Rutland <[email protected]>
Cc: Mike Leach <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Will Deacon <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
Refactor test to better enable sharing of logic, to give an idea of
progress and introduce test functions. Add test of measuring both
cycles and cycles:b simultaneously.
Signed-off-by: Ian Rogers <[email protected]>
Cc: Adrian Hunter <[email protected]>
Cc: Alexander Shishkin <[email protected]>
Cc: Athira Rajeev <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Kan Liang <[email protected]>
Cc: Mark Rutland <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Ravi Bangoria <[email protected]>
Cc: Song Liu <[email protected]>
Cc: Thomas Richter <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
Document that 'b' is used as a modifier to make an event use a BPF
counter.
Fixes: 01bd8efcec444468 ("perf stat: Introduce ':b' modifier")
Signed-off-by: Ian Rogers <[email protected]>
Cc: Adrian Hunter <[email protected]>
Cc: Alexander Shishkin <[email protected]>
Cc: Athira Rajeev <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Kan Liang <[email protected]>
Cc: Mark Rutland <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Ravi Bangoria <[email protected]>
Cc: Song Liu <[email protected]>
Cc: Thomas Richter <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
Test cases need to exit with non-zero status if they failed,
we currently don't do that:
# KTAP version 1
# 1..3
# # At /root/ksft-net-drv/drivers/net/./ping.py line 18:
# # Check failed 1 != 2
# not ok 1 ping.test_v4
# ok 2 ping.test_v6
# ok 3 ping.test_tcp
# # Totals: pass:2 fail:1 xfail:0 xpass:0 skip:0 error:0
ok 1 selftests: drivers/net: ping.py
^^^^
It's a bit tempting to make the exit part of ksft_run(),
but that only works well for very trivial setups. We can
revisit this later, if people forget to call ksft_exit().
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
Totals currently only pay attention to exceptions, if check fails
(say ksft_eq()) the test case will be counted as pass:
# At /ksft/drivers/net/./ping.py line 18:
# Check failed 1 != 2
not ok 1 ping.test_v4
ok 2 ping.test_v6
ok 3 ping.test_tcp
# Totals: pass:3 fail:0 xfail:0 xpass:0 skip:0 error:0
^^^^^^^^^^^^^
Pay attention to the result.
Fixes: b86761ff6374 ("selftests: net: add scaffolding for Netlink tests in Python")
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
Cross-merge networking fixes after downstream PR.
Conflicts:
include/trace/events/rpcgss.h
386f4a737964 ("trace: events: cleanup deprecated strncpy uses")
a4833e3abae1 ("SUNRPC: Fix rpcgss_context trace event acceptor field")
Adjacent changes:
drivers/net/ethernet/intel/ice/ice_tc_lib.c
2cca35f5dd78 ("ice: Fix checking for unsupported keys on non-tunnel device")
784feaa65dfd ("ice: Add support for PFCP hardware offload in switchdev")
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"A little calmer than usual, probably just the timing of sub-tree PRs.
Including fixes from netfilter.
Current release - regressions:
- inet: bring NLM_DONE out to a separate recv() again, fix user space
which assumes multiple recv()s will happen and gets blocked forever
- drv: mlx5:
- restore mistakenly dropped parts in register devlink flow
- use channel mdev reference instead of global mdev instance for
coalescing
- acquire RTNL lock before RQs/SQs activation/deactivation
Previous releases - regressions:
- net: change maximum number of UDP segments to 128, fix virtio
compatibility with Windows peers
- usb: ax88179_178a: avoid writing the mac address before first
reading
Previous releases - always broken:
- sched: fix mirred deadlock on device recursion
- netfilter:
- br_netfilter: skip conntrack input hook for promisc packets
- fixes removal of duplicate elements in the pipapo set backend
- various fixes for abort paths and error handling
- af_unix: don't peek OOB data without MSG_OOB
- drv: flower: fix fragment flags handling in multiple drivers
- drv: ravb: fix jumbo frames and packet stats accounting
Misc:
- kselftest_harness: fix Clang warning about zero-length format
- tun: limit printing rate when illegal packet received by tun dev"
* tag 'net-6.9-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (46 commits)
net: ethernet: ti: am65-cpsw-nuss: cleanup DMA Channels before using them
net: usb: ax88179_178a: avoid writing the mac address before first reading
net: ravb: Fix RX byte accounting for jumbo packets
net: ravb: Fix GbEth jumbo packet RX checksum handling
net: ravb: Allow RX loop to move past DMA mapping errors
net: ravb: Count packets instead of descriptors in R-Car RX path
net: ethernet: mtk_eth_soc: fix WED + wifi reset
net:usb:qmi_wwan: support Rolling modules
selftests: kselftest_harness: fix Clang warning about zero-length format
net/sched: Fix mirred deadlock on device recursion
netfilter: nf_tables: fix memleak in map from abort path
netfilter: nf_tables: restore set elements when delete set fails
netfilter: nf_tables: missing iterator type in lookup walk
s390/ism: Properly fix receive message buffer allocation
net: dsa: mt7530: fix port mirroring for MT7988 SoC switch
net: dsa: mt7530: fix mirroring frames received on local port
tun: limit printing rate when illegal packet received by tun dev
ice: Fix checking for unsupported keys on non-tunnel device
ice: tc: allow zero flags in parsing tc flower
ice: tc: check src_vsi in case of traffic from VF
...
|
|
Apparently it's more legal to pass the format as NULL, than
it is to use an empty string. Clang complains about empty
formats:
./../kselftest_harness.h:1207:30: warning: format string is empty
[-Wformat-zero-length]
1207 | diagnostic ? "%s" : "", diagnostic);
| ^~
1 warning generated.
Reported-by: Sean Christopherson <[email protected]>
Link: https://lore.kernel.org/all/[email protected]
Fixes: 378193eff339 ("selftests: kselftest_harness: let PASS / FAIL provide diagnostic")
Tested-by: Sean Christopherson <[email protected]>
Reviewed-by: Muhammad Usama Anjum <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
Character sequences starting with `\` are interpreted by python as
escaped Unicode characters. However, they have other meaning in
regular expressions (e.g: "\d").
It seems Python >= 3.12 starts emitting a SyntaxWarning when these
escaped sequences are not recognized as valid Unicode characters.
An example of these warnings:
tools/testing/selftests/net/openvswitch/ovs-dpctl.py:505:
SyntaxWarning: invalid escape sequence '\d'
Fix all the warnings by flagging literals as raw strings.
Signed-off-by: Adrian Moreno <[email protected]>
Reviewed-by: Aaron Conole <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
selftest build is fairly noisy, it's easy to miss warnings.
It's standard practice to add alternative messages in
the Makefile. I was grepping for existing solutions,
and found that bpf already has the right knobs.
Move them to lib.mk and adopt in net.
Convert the basic rules in lib.mk.
Acked-by: Daniel Borkmann <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
Test "perf probe of function from different CU" fails due to certain
configs not being enabled. Building the kernel with
CONFIG_KPROBE_EVENTS=y and CONFIG_UPROBE_EVENTS=y fixes the issue. As
CONFIG_KPROBE_EVENTS is dependent on CONFIG_KPROBES, enable it as well.
Some platforms enable these configs as a part of their defconfig, so
this change is only required for the ones that don't do so.
Reviewed-by: Masami Hiramatsu <[email protected]>
Signed-off-by: Chaitanya S Prakash <[email protected]>
Cc: Anshuman Khandual <[email protected]>
Cc: James Clark <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
Add weight1, weight2 and weight3 fields to -F/--fields and their aliases
like 'ins_lat', 'p_stage_cyc' and 'retire_lat'. Note that they are in
the sort keys too but the difference is that output fields will sum up
the weight values and display the average.
In the sort key, users can see the distribution of weight value and I
think it's confusing we have local vs. global weight for the same weight.
For example, I experiment with mem-loads events to get the weights. On
my laptop, it seems only weight1 field is supported.
$ perf mem record -- perf test -w noploop
Let's look at the noploop function only. It has 7 samples.
$ perf script -F event,ip,sym,weight | grep noploop
# event weight ip sym
cpu/mem-loads,ldlat=30/P: 43 55b3c122bffc noploop
cpu/mem-loads,ldlat=30/P: 48 55b3c122bffc noploop
cpu/mem-loads,ldlat=30/P: 38 55b3c122bffc noploop <--- same weight
cpu/mem-loads,ldlat=30/P: 38 55b3c122bffc noploop <--- same weight
cpu/mem-loads,ldlat=30/P: 59 55b3c122bffc noploop
cpu/mem-loads,ldlat=30/P: 33 55b3c122bffc noploop
cpu/mem-loads,ldlat=30/P: 38 55b3c122bffc noploop <--- same weight
When you use the 'weight' sort key, it'd show entries with a separate
weight value separately. Also note that the first entry has 3 samples
with weight value 38, so they are displayed together and the weight
value is the sum of 3 samples (114 = 38 * 3).
$ perf report -n -s +weight | grep -e Weight -e noploop
# Overhead Samples Command Shared Object Symbol Weight
0.53% 3 perf perf [.] noploop 114
0.18% 1 perf perf [.] noploop 59
0.18% 1 perf perf [.] noploop 48
0.18% 1 perf perf [.] noploop 43
0.18% 1 perf perf [.] noploop 33
If you use 'local_weight' sort key, you can see the actual weight.
$ perf report -n -s +local_weight | grep -e Weight -e noploop
# Overhead Samples Command Shared Object Symbol Local Weight
0.53% 3 perf perf [.] noploop 38
0.18% 1 perf perf [.] noploop 59
0.18% 1 perf perf [.] noploop 48
0.18% 1 perf perf [.] noploop 43
0.18% 1 perf perf [.] noploop 33
But when you use the -F/--field option instead, you can see the average
weight for the while noploop function (as it won't group samples by
weight value and use the default 'comm,dso,sym' sort keys).
$ perf report -n -F +weight | grep -e Weight -e noploop
Warning:
--fields weight shows the average value unlike in the --sort key.
# Overhead Samples Weight1 Command Shared Object Symbol
1.23% 7 42.4 perf perf [.] noploop
The weight1 field shows the average value:
(38 * 3 + 59 + 48 + 43 + 33) / 7 = 42.4
Also it'd show the warning that 'weight' field has the average value.
Using 'weight1' can remove the warning.
Signed-off-by: Namhyung Kim <[email protected]>
Cc: Adrian Hunter <[email protected]>
Cc: Andi Kleen <[email protected]>
Cc: Athira Rajeev <[email protected]>
Cc: Ian Rogers <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Kan Liang <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Stephane Eranian <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
Like period and sample numbers, it'd be better to track weight values
and display them in the output rather than having them as sort keys.
This patch just adds a few more fields to save the weights in a hist
entry. It'll be displayed as new output fields in the later patch.
Signed-off-by: Namhyung Kim <[email protected]>
Cc: Adrian Hunter <[email protected]>
Cc: Andi Kleen <[email protected]>
Cc: Athira Rajeev <[email protected]>
Cc: Ian Rogers <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Kan Liang <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Stephane Eranian <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
It's strange that sort.h has the definition of struct hist_entry. As
sort.h already includes hist.h, let's move the data structure to hist.h.
Signed-off-by: Namhyung Kim <[email protected]>
Cc: Adrian Hunter <[email protected]>
Cc: Andi Kleen <[email protected]>
Cc: Athira Rajeev <[email protected]>
Cc: Ian Rogers <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Kan Liang <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Stephane Eranian <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
When dumping a character array, libbpf will watch for a '\0' and set
is_array_terminated=true if found. This prevents libbpf from printing
the remaining characters of the array, treating it as a nul-terminated
string.
However, once this flag is set, it's never reset, leading to subsequent
characters array not being printed properly:
.str_multi = (__u8[2][16])[
[
'H',
'e',
'l',
],
],
This patch saves the is_array_terminated flag and restores its
default (false) value before looping over the elements of an array,
then restores it afterward. This way, libbpf's behavior is unchanged
when dumping the characters of an array, but subsequent arrays are
printed properly:
.str_multi = (__u8[2][16])[
[
'H',
'e',
'l',
],
[
'l',
'o',
],
],
Signed-off-by: Quentin Deslandes <[email protected]>
Signed-off-by: Daniel Borkmann <[email protected]>
Link: https://lore.kernel.org/bpf/[email protected]
|
|
In btf_dump_array_data(), libbpf will call btf_dump_dump_type_data() for
each element. For an array of characters, each element will be
processed the following way:
- btf_dump_dump_type_data() is called to print the character
- btf_dump_data_pfx() prefixes the current line with the proper number
of indentations
- btf_dump_int_data() is called to print the character
- After the last character is printed, btf_dump_dump_type_data() calls
btf_dump_data_pfx() before writing the closing bracket
However, for an array containing characters, btf_dump_int_data() won't
print any '\0' and subsequent characters. This leads to situations where
the line prefix is written, no character is added, then the prefix is
written again before adding the closing bracket:
(struct sk_metadata){
.str_array = (__u8[14])[
'H',
'e',
'l',
'l',
'o',
],
This change solves this issue by printing the '\0' character, which
has two benefits:
- The bracket closing the array is properly aligned
- It's clear from a user point of view that libbpf uses '\0' as a
terminator for arrays of characters.
Signed-off-by: Quentin Deslandes <[email protected]>
Signed-off-by: Daniel Borkmann <[email protected]>
Link: https://lore.kernel.org/bpf/[email protected]
|
|
Netfilter tests have been moved to a subdir under selftests/net by
patch series [1]. Fix the path in selftests/Makefile accordingly.
This helps fix the following error:
tools/testing/selftests$ make
...
make[1]: Entering directory 'tools/testing/selftests'
make[1]: *** netfilter: No such file or directory. Stop.
make[1]: Leaving directory 'tools/testing/selftests'
[1] https://lore.kernel.org/all/[email protected]/
Reported-by: kernel test robot <[email protected]>
Signed-off-by: Yujie Liu <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
Real driver testing will obviously require enabling more
options, but will require more manual setup in the first
place. For CIs running purely software tests we need
to enable netdevsim.
Reviewed-by: Willem de Bruijn <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
ping prints all the info to stdout. To make debug easier capture
stdout in the Exception raised when command unexpectedly fails.
Reviewed-by: Willem de Bruijn <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
This commit contains a series of clean-ups and fixes for bpftool's bash
completion file:
- Make sure all local variables are declared as such.
- Make sure variables are initialised before being read.
- Update ELF section ("maps" -> ".maps") for looking up map names in
object files.
- Fix call to _init_completion.
- Move definition for MAP_TYPE and PROG_TYPE higher up in the scope to
avoid defining them multiple times, reuse MAP_TYPE where relevant.
- Simplify completion for "duration" keyword in "bpftool prog profile".
- Fix completion for "bpftool struct_ops register" and "bpftool link
(pin|detach)" where we would repeatedly suggest file names instead of
suggesting just one name.
- Fix completion for "bpftool iter pin ... map MAP" to account for the
"map" keyword.
- Add missing "detach" suggestion for "bpftool link".
Signed-off-by: Quentin Monnet <[email protected]>
Signed-off-by: Daniel Borkmann <[email protected]>
Link: https://lore.kernel.org/bpf/[email protected]
|
|
When using references to BPF programs, bpftool supports passing programs
by name on the command line. The manual pages for "bpftool prog" and
"bpftool map" (for prog_array updates) mention it, but we have a few
additional subcommands that support referencing programs by name but do
not mention it in their documentation. Let's update the pages for
subcommands "btf", "cgroup", and "net".
Similarly, we can reference maps by name when passing them to "bpftool
prog load", so we update the page for "bpftool prog" as well.
Signed-off-by: Quentin Monnet <[email protected]>
Signed-off-by: Daniel Borkmann <[email protected]>
Link: https://lore.kernel.org/bpf/[email protected]
|
|
In some cases, the stack pointer on x86 (rsp = reg7) is used to point
variables on stack but it's not the frame base register. Then it
should handle the register like normal registers (IOW not to access
the other stack variables using offset calculation) but it should not
assume it would have a pointer.
Before:
-----------------------------------------------------------
find data type for 0x7c(reg7) at tcp_getsockopt+0xb62
CU for net/ipv4/tcp.c (die:0x7b5f516)
frame base: cfa=0 fbreg=6
no pointer or no type
check variable "zc" failed (die: 0x7b9580a)
variable location: base=reg7, offset=0x40
type='struct tcp_zerocopy_receive' size=0x40 (die:0x7b947f4)
After:
-----------------------------------------------------------
find data type for 0x7c(reg7) at tcp_getsockopt+0xb62
CU for net/ipv4/tcp.c (die:0x7b5f516)
frame base: cfa=0 fbreg=6
found "zc" in scope=3/3 (die: 0x7b957fc) type_offset=0x3c
variable location: base=reg7, offset=0x40
type='struct tcp_zerocopy_receive' size=0x40 (die:0x7b947f4)
Note that the type-offset was properly calculated to 0x3c as the
variable starts at 0x40.
Signed-off-by: Namhyung Kim <[email protected]>
Cc: Adrian Hunter <[email protected]>
Cc: Ian Rogers <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Kan Liang <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
In match_var_offset(), it just checked the end address of the variable
with the given offset because it assumed the register holds a pointer
to the data type and the offset starts from the base.
But I found some cases that the stack pointer (rsp = reg7) register is
used to pointer a stack variable while the frame base is maintained by a
different register (rbp = reg6). In that case, it cannot simply use the
stack pointer as it cannot guarantee that it points to the frame base.
So it needs to check both boundaries of the variable location.
Before:
-----------------------------------------------------------
find data type for 0x7c(reg7) at tcp_getsockopt+0xb62
CU for net/ipv4/tcp.c (die:0x7b5f516)
frame base: cfa=0 fbreg=6
no pointer or no type
check variable "tss" failed (die: 0x7b95801)
variable location: base reg7, offset=0x110
type='struct scm_timestamping_internal' size=0x30 (die:0x7b8c126)
So the current code just checks register number for the non-PC and
non-FB registers and assuming it has offset 0. But this variable has
offset 0x110 so it should not match to this.
After:
-----------------------------------------------------------
find data type for 0x7c(reg7) at tcp_getsockopt+0xb62
CU for net/ipv4/tcp.c (die:0x7b5f516)
frame base: cfa=0 fbreg=6
no pointer or no type
check variable "zc" failed (die: 0x7b9580a)
variable location: base=reg7, offset=0x40
type='struct tcp_zerocopy_receive' size=0x40 (die:7b947f4)
Now it find the correct variable "zc". It was located at reg7 + 0x40
and the size if 0x40 which means it should cover [0x40, 0x80). And the
access was for reg7 + 0x7c so it found the right one. But it still
failed to use the variable and it would be handled in the next patch.
Signed-off-by: Namhyung Kim <[email protected]>
Cc: Adrian Hunter <[email protected]>
Cc: Ian Rogers <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Kan Liang <[email protected]>
Cc: Masami Hiramatsu <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
In match_var_offset(), it checks the offset range with the target type
only for non-pointer types. But it also needs to check the pointer
types with the target type.
This is because there can be more than one pointer variable located in
the same register. Let's look at the following example. It's looking
up a variable for reg3 at tcp_get_info+0x62. It found "sk" variable but
it wasn't the right one since it accesses beyond the target type (struct
'sock' in this case) size.
-----------------------------------------------------------
find data type for 0x7bc(reg3) at tcp_get_info+0x62
CU for net/ipv4/tcp.c (die:0x7b5f516)
frame base: cfa=0 fbreg=6
offset: 1980 is bigger than size: 760
check variable "sk" failed (die: 0x7b92b2c)
variable location: reg3
type='struct sock' size=0x2f8 (die:0x7b63c3a)
Actually there was another variable "tp" in the function and it's
located at the same (reg3) because it's just type-casted like below.
void tcp_get_info(struct sock *sk, struct tcp_info *info)
{
const struct tcp_sock *tp = tcp_sk(sk);
...
The 'struct tcp_sock' contains the 'struct sock' at offset 0 so it can
just use the same address as a pointer to tcp_sock. That means it
should match variables correctly by checking the offset and size.
Actually it cannot distinguish if the offset was smaller than the size
of the original struct sock. But I think it's fine as they are the same
at that part.
So let's check the target type size and retry if it doesn't match.
Now it succeeded to find the correct variable.
-----------------------------------------------------------
find data type for 0x7bc(reg3) at tcp_get_info+0x62
CU for net/ipv4/tcp.c (die:0x7b5f516)
frame base: cfa=0 fbreg=6
found "tp" in scope=1/1 (die: 0x7b92b16) type_offset=0x7bc
variable location: reg3
type='struct tcp_sock' size=0xa68 (die:0x7b81380)
Fixes: bc10db8eb8955fbc ("perf annotate-data: Support stack variables")
Signed-off-by: Namhyung Kim <[email protected]>
Cc: Adrian Hunter <[email protected]>
Cc: Ian Rogers <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Kan Liang <[email protected]>
Cc: Masami Hiramatsu <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
To verify it found the correct variable, let's add the location
expression to the debug message.
$ perf --debug type-profile annotate --data-type
...
-----------------------------------------------------------
find data type for 0xaf0(reg15) at schedule+0xeb
CU for kernel/sched/core.c (die:0x1180523)
frame base: cfa=0 fbreg=6
found "rq" in scope=3/4 (die: 0x11b6a00) type_offset=0xaf0
variable location: reg15
type='struct rq' size=0xfc0 (die:0x11892e2)
-----------------------------------------------------------
find data type for 0x7bc(reg3) at tcp_get_info+0x62
CU for net/ipv4/tcp.c (die:0x7b5f516)
frame base: cfa=0 fbreg=6
offset: 1980 is bigger than size: 760
check variable "sk" failed (die: 0x7b92b2c)
variable location: reg3
type='struct sock' size=0x2f8 (die:0x7b63c3a)
-----------------------------------------------------------
...
The first case is fine. It looked up a data type in r15 with offset of
0xaf0 at schedule+0xeb. It found the CU die and the frame base info and
the variable "rq" was found in the scope 3/4. Its location is the r15
register and the type size is 0xfc0 which includes 0xaf0.
But the second case is not good. It looked up a data type in rbx (reg3)
with offset 0x7bc. It found a CU and the frame base which is good so
far. And it also found a variable "sk" but the access offset is bigger
than the type size (1980 vs. 760 or 0x7bc vs. 0x2f8). The variable has
the right location (reg3) but I need to figure out why it accesses
beyond what it's supposed to.
Signed-off-by: Namhyung Kim <[email protected]>
Cc: Adrian Hunter <[email protected]>
Cc: Ian Rogers <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Kan Liang <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
[ Fix the build on 32-bit by casting Dwarf_Word to (long) in pr_debug_location() ]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
On my new laptop with packages from nixos-unstable, gcc 12.3.0 produces
> lib/setup.c: In function ‘__test_msg’:
> lib/setup.c:20:9: error: format not a string literal and no format arguments [-Werror=format-security]
> 20 | ksft_print_msg(buf);
> | ^~~~~~~~~~~~~~
> lib/setup.c: In function ‘__test_ok’:
> lib/setup.c:26:9: error: format not a string literal and no format arguments [-Werror=format-security]
> 26 | ksft_test_result_pass(buf);
> | ^~~~~~~~~~~~~~~~~~~~~
> lib/setup.c: In function ‘__test_fail’:
> lib/setup.c:32:9: error: format not a string literal and no format arguments [-Werror=format-security]
> 32 | ksft_test_result_fail(buf);
> | ^~~~~~~~~~~~~~~~~~~~~
> lib/setup.c: In function ‘__test_xfail’:
> lib/setup.c:38:9: error: format not a string literal and no format arguments [-Werror=format-security]
> 38 | ksft_test_result_xfail(buf);
> | ^~~~~~~~~~~~~~~~~~~~~~
> lib/setup.c: In function ‘__test_error’:
> lib/setup.c:44:9: error: format not a string literal and no format arguments [-Werror=format-security]
> 44 | ksft_test_result_error(buf);
> | ^~~~~~~~~~~~~~~~~~~~~~
> lib/setup.c: In function ‘__test_skip’:
> lib/setup.c:50:9: error: format not a string literal and no format arguments [-Werror=format-security]
> 50 | ksft_test_result_skip(buf);
> | ^~~~~~~~~~~~~~~~~~~~~
> cc1: some warnings being treated as errors
As the buffer was already pre-printed into, print it as a string
rather than a format-string.
Fixes: cfbab37b3da0 ("selftests/net: Add TCP-AO library")
Signed-off-by: Dmitry Safonov <[email protected]>
Reported-by: Muhammad Usama Anjum <[email protected]>
Signed-off-by: Paolo Abeni <[email protected]>
|
|
On my new laptop with packages from nixos-unstable, gcc 12.3.0 produces:
> lib/proc.c: In function ‘netstat_read_type’:
> lib/proc.c:89:9: error: format not a string literal and no format arguments [-Werror=format-security]
> 89 | if (fscanf(fnetstat, type->header_name) == EOF)
> | ^~
> cc1: some warnings being treated as errors
Here the selftests lib parses header name, while expectes non-space word
ending with a column.
Fixes: cfbab37b3da0 ("selftests/net: Add TCP-AO library")
Signed-off-by: Dmitry Safonov <[email protected]>
Reported-by: Muhammad Usama Anjum <[email protected]>
Signed-off-by: Paolo Abeni <[email protected]>
|
|
The structure is on the stack and has to be zero-initialized as
the kernel checks for:
> if (in.reserved != 0 || in.reserved2 != 0)
> return -EINVAL;
Fixes: b26660531cf6 ("selftests/net: Add test for TCP-AO add setsockopt() command")
Signed-off-by: Dmitry Safonov <[email protected]>
Signed-off-by: Paolo Abeni <[email protected]>
|
|
Currently, "active reset" cases are flaky, because select() is called
for 3 sockets, while only 2 are expected to receive RST.
The idea of the third socket was to get into request_sock_queue,
but the test mistakenly attempted to connect() after the listener
socket was shut down.
Repair this test, it's important to check the different kernel
code-paths for signing RST TCP-AO segments.
Fixes: c6df7b2361d7 ("selftests/net: Add TCP-AO RST test")
Reported-by: Jakub Kicinski <[email protected]>
Signed-off-by: Dmitry Safonov <[email protected]>
Signed-off-by: Paolo Abeni <[email protected]>
|
|
This test lacks a topology diagram, making the setup not obvious.
Add one.
Signed-off-by: Petr Machata <[email protected]>
Reviewed-by: Hangbin Liu <[email protected]>
Signed-off-by: Paolo Abeni <[email protected]>
|
|
This test lacks a topology diagram, making the setup not obvious.
Add one.
Signed-off-by: Petr Machata <[email protected]>
Reviewed-by: Hangbin Liu <[email protected]>
Signed-off-by: Paolo Abeni <[email protected]>
|