| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
This adds my clock skew estimation test from the timetest suite.
It measures the drift between CLOCK_MONOTONIC and CLOCK_MONOTONIC_RAW
and compares it with the current frequency value from adjtimex.
It sometimes can trigger false failures when ntpd isn't in a
steady state, but its a useful too when doing adjtimex testing.
Cc: Shuah Khan <[email protected]>
Cc: Prarit Bhargava <[email protected]>
Cc: Thomas Gleixner <[email protected]>
Cc: Richard Cochran <[email protected]>
Signed-off-by: John Stultz <[email protected]>
Tested-by: Prarit Bhargava <[email protected]>
Signed-off-by: Shuah Khan <[email protected]>
|
|
Adds my nanosleep latency test from the timetest suite.
This checks to make sure we don't see "unreasonable"
latencies (> 40ms) when calling nanosleep.
Cc: Shuah Khan <[email protected]>
Cc: Prarit Bhargava <[email protected]>
Cc: Thomas Gleixner <[email protected]>
Cc: Richard Cochran <[email protected]>
Signed-off-by: John Stultz <[email protected]>
Tested-by: Prarit Bhargava <[email protected]>
Signed-off-by: Shuah Khan <[email protected]>
|
|
This adds my inconsistency-test from my timetests suite,
which checks for (single threaded) time inconsistencies
across the various clockids.
Cc: Shuah Khan <[email protected]>
Cc: Prarit Bhargava <[email protected]>
Cc: Thomas Gleixner <[email protected]>
Cc: Richard Cochran <[email protected]>
Signed-off-by: John Stultz <[email protected]>
Tested-by: Prarit Bhargava <[email protected]>
Signed-off-by: Shuah Khan <[email protected]>
|
|
Add my basic nanosleep test from my timetest suite.
This test validates that nanosleep doesn't return early
against a number of clockids.
Cc: Shuah Khan <[email protected]>
Cc: Prarit Bhargava <[email protected]>
Cc: Thomas Gleixner <[email protected]>
Cc: Richard Cochran <[email protected]>
Signed-off-by: John Stultz <[email protected]>
Tested-by: Prarit Bhargava <[email protected]>
Signed-off-by: Shuah Khan <[email protected]>
|
|
The posix_timers.c test has a loop that tries to keep it in
kernel space, repeatedly calling brk(). However, it doesn't
check the return value, which causes warnings.
This patch adds a err value which captures the return value
and modifies the test so it will quit if a failure occurs.
Cc: Shuah Khan <[email protected]>
Cc: Prarit Bhargava <[email protected]>
Cc: Thomas Gleixner <[email protected]>
Cc: Richard Cochran <[email protected]>
Signed-off-by: John Stultz <[email protected]>
Tested-by: Prarit Bhargava <[email protected]>
Signed-off-by: Shuah Khan <[email protected]>
|
|
Try to streamline the makefile so its easier to add timer/timekeeping
tests.
Also adds support for the CROSS_COMPILE variable.
Cc: Shuah Khan <[email protected]>
Cc: Prarit Bhargava <[email protected]>
Cc: Thomas Gleixner <[email protected]>
Cc: Richard Cochran <[email protected]>
Signed-off-by: John Stultz <[email protected]>
Tested-by: Prarit Bhargava <[email protected]>
Signed-off-by: Shuah Khan <[email protected]>
|
|
In perf hists browser, the fold/unfold stat of each hist entry is
recorded but hb->nr_callchain_rows loses its value after zoom out and
zoom in back. This causes a wrong row cursor range that restrict user to
move down anymore.
This bug can be reproduced as follows:
$ perf record -g -e syscalls:* ls
$ perf report
Available samples
================================================================
2 syscalls:sys_enter_mprotect <= [enter one of the entries]
2 syscalls:sys_exit_mprotect
13 syscalls:sys_enter_brk
...
In the hists brower, unfold some of the items, now the cursor can reach
to any rows:
Children Self Command Shared Object Symbol
================================================================
- 100.00% 100.00% ls libuClibc-0.9.33.2.so [.] lstat64
- lstat64
16.67% 0x6469702e64
8.33% 0x646970
8.33% 0x617461
8.33% 0x65
- 16.67% 0.00% ls [unknown] [.]0x6469702e64
0x6469702e64 <= [cursor can reach to bottom line, everything is ok]
Now, zoom back to "Available samples" and enter again:
Children Self Command Shared Object Symbol
================================================================
- 100.00% 100.00% ls libuClibc-0.9.33.2.so [.] lstat64
- lstat64
16.67% 0x6469702e64
8.33% 0x646970
8.33% 0x617461 <= [cursor may stop here, can't move down anymore]
8.33% 0x65
- 16.67% 0.00% ls [unknown] [.]0x6469702e64
0x6469702e64
This patch recalculates hb->nr_callchain_rows to fix the bug.
Signed-off-by: He Kuang <[email protected]>
Acked-by: Namhyung Kim <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Paul Mackerras <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Wang Nan <[email protected]>
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
perf fails to build with gcc "(GCC) 4.4.7 20120313 (Red Hat
4.4.7-4.0.9)" (a.k.a., RHEL6 / CentOS 6 / OL 6):
cc1: warnings being treated as errors
util/probe-event.c: In function ‘get_alternative_line_range’:
util/probe-event.c:359: error: missing initializer
util/probe-event.c:359: error: (near initialization for ‘pp.file’)
util/probe-event.c:359: error: missing initializer
util/probe-event.c:359: error: (near initialization for ‘result.function’)
Fix by bringing in initializers to declaration.
Signed-off-by: David Ahern <[email protected]>
Cc: Masami Hiramatsu <[email protected]>
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
When zoom into thread/dso/symbol, the fold/unfold stat is cleared in
hists__filter_by_thread/dso/symbol(), but h->nr_rows is not cleared. So
if we toggle fold stat on the unfold entires, nr_entries got a wrong
value.
This bug can be reproduced as follows:
$ perf record -g -e syscalls:sys_enter_open ls
$ perf report
Children Self Command Shared Object Symbol
================================================================
+ 50.00% 0.00% ls ld64.so [.] _dl_get_ready_to_run
- 50.00% 0.00% ls ld64.so [.] _dl_load_shared_library
_dl_load_shared_library <= [Zoom into thread/dso]
_dl_get_ready_to_run
_start
...
In the new thread hists, all entries reset to fold, if we unfold the
same entry as we previously unfolded, nr_entries got wrong value, and we
can't move down cursor to bottom row.
Thread: ls
Children Self Command Shared Object Symbol
================================================================
+ 50.00% 0.00% ls ld64.so [.] _dl_get_ready_to_run
- 50.00% 0.00% ls ld64.so [.] _dl_load_shared_library
_dl_load_shared_library
_dl_get_ready_to_run <= [cursor may stop here, can't move down]
_start
...
This patch clear h->nr_rows to fix this bug.
Signed-off-by: He Kuang <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Paul Mackerras <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Wang Nan <[email protected]>
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
A double free occurred when get source file path failed. If lr->path
failed to assign a new value, it will be freed as the old path and then
be freed again during line_range__clear(), and causes this:
$ perf probe -L do_execve -k vmlinux
*** Error in `/usr/bin/perf': double free or corruption (fasttop):
0x0000000000a9ac50 ***
======= Backtrace: =========
../lib64/libc.so.6(+0x6eeef)[0x7ffff5e44eef]
../lib64/libc.so.6(+0x78cae)[0x7ffff5e4ecae]
../lib64/libc.so.6(+0x79987)[0x7ffff5e4f987]
../bin/perf[0x4ab41f]
...
This patch fix this problem.
Signed-off-by: He Kuang <[email protected]>
Acked-by: Masami Hiramatsu <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Wang Nan <[email protected]>
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
So that we can debug feature detection problems.
It will appear on $(OUTPUT)feature-checks/.make-libbabeltrace.output,
using the libbabeltrace feature test.
Whole process:
[acme@ssdandy linux]$ make -C tools/perf install-bin
make: Entering directory `/home/acme/git/linux/tools/perf'
BUILD: Doing 'make -j8' parallel build
config/Makefile:425: No libunwind found. Please install libunwind-dev[el] >= 1.1 and/or set LIBUNWIND_DIR
config/Makefile:709: No libbabeltrace found, disables 'perf data' CTF format support, please install libbabeltrace-dev[el]/libbabeltrace-ctf-dev
Auto-detecting system features:
... dwarf: [ on ]
... glibc: [ on ]
... gtk2: [ on ]
... libaudit: [ on ]
... libbfd: [ on ]
... libelf: [ on ]
... libnuma: [ on ]
... libperl: [ on ]
... libpython: [ on ]
... libslang: [ on ]
... libunwind: [ OFF ]
... libdw-dwarf-unwind: [ on ]
... libbabeltrace: [ OFF ]
<SNIP>
[acme@ssdandy linux]$ find tools/perf -name ".make-*.output" | grep lib | tail -5
tools/perf/config/feature-checks/.make-libdw-dwarf-unwind.output
tools/perf/config/feature-checks/.make-libbabeltrace.output
tools/perf/config/feature-checks/.make-zlib.output
tools/perf/config/feature-checks/.make-liberty.output
tools/perf/config/feature-checks/.make-liberty-z.output
[acme@ssdandy linux]$
[acme@ssdandy linux]$ cat tools/perf/config/feature-checks/.make-libbabeltrace.output
make[1]: Entering directory `/home/acme/git/linux/tools/perf/config/feature-checks'
gcc -MD -Wall -Werror -o test-libbabeltrace.bin test-libbabeltrace.c -Wl,-z,noexecstack -lbabeltrace-ctf # -lbabeltrace provided by
test-libbabeltrace.c:2:42: fatal error: babeltrace/ctf-writer/writer.h: No such file or directory
#include <babeltrace/ctf-writer/writer.h>
^
compilation terminated.
make[1]: *** [test-libbabeltrace.bin] Error 1
make[1]: Leaving directory `/home/acme/git/linux/tools/perf/config/feature-checks'
[acme@ssdandy linux]$
So the libbabeltrace feature will not be builtin, but if we do what is required for it
to be built, namely point where we have it installed:
[acme@ssdandy linux]$ time make -C tools/perf LIBBABELTRACE_DIR=/opt/libbabeltrace install-bin
make: Entering directory `/home/acme/git/linux/tools/perf'
BUILD: Doing 'make -j8' parallel build
config/Makefile:425: No libunwind found. Please install libunwind-dev[el] >= 1.1 and/or set LIBUNWIND_DIR
Auto-detecting system features:
... dwarf: [ on ]
... glibc: [ on ]
... gtk2: [ on ]
... libaudit: [ on ]
... libbfd: [ on ]
... libelf: [ on ]
... libnuma: [ on ]
... libperl: [ on ]
... libpython: [ on ]
... libslang: [ on ]
... libunwind: [ OFF ]
... libdw-dwarf-unwind: [ on ]
... libbabeltrace: [ on ]
... zlib: [ on ]
... DWARF post unwind library: libdw
<SNIP>
[acme@ssdandy linux]$ find tools/perf -name ".make-libbabel*.output" | grep lib | tail -5
tools/perf/config/feature-checks/.make-libbabeltrace.output
[acme@ssdandy linux]$ cat tools/perf/config/feature-checks/.make-libbabeltrace.output
make[1]: Entering directory `/home/acme/git/linux/tools/perf/config/feature-checks'
gcc -MD -I/opt/libbabeltrace/include -Wall -Werror -o test-libbabeltrace.bin test-libbabeltrace.c -Wl,-z,noexecstack -L/opt/libbabeltrace/lib -lbabeltrace-ctf # -lbabeltrace provided by
make[1]: Leaving directory `/home/acme/git/linux/tools/perf/config/feature-checks'
[acme@ssdandy linux]$
Acked-by: Jiri Olsa <[email protected]>
Cc: David Ahern <[email protected]>
Cc: Frederic Weisbecker <[email protected]>
Cc: Jeremie Galarneau <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Paul Mackerras <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Sebastian Andrzej Siewior <[email protected]>
Cc: Tom Zanussi <[email protected]>
Cc: Wang Nan <[email protected]>
Link: http://lkml.kernel.org/n/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
Following patch added -Werror for feature builds:
b49f1a4be701 perf tools: Improve feature test debuggability
and exposed a problem in the libbabeltrace feature build, because it was
including wrong header and gcc couldn't find the used symbol definition.
Adding proper header and keeping the old one as it is needed also
(libbabeltrace quirk).
Reported-by: Arnaldo Carvalho de Melo <[email protected]>
Tested-by: Arnaldo Carvalho de Melo <[email protected]>
Signed-off-by: Jiri Olsa <[email protected]>
Cc: David Ahern <[email protected]>
Cc: Frederic Weisbecker <[email protected]>
Cc: Jeremie Galarneau <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Paul Mackerras <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Sebastian Andrzej Siewior <[email protected]>
Cc: Tom Zanussi <[email protected]>
Cc: Wang Nan <[email protected]>
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
It currently prevents adding probes in weak symbols. But there're cases
that given name is an only weak symbol so that we cannot add probe.
$ perf probe -x /usr/lib/libc.so.6 -a calloc
Failed to find symbol calloc in /usr/lib/libc-2.21.so
Error: Failed to add events.
$ nm /usr/lib/libc.so.6 | grep calloc
000000000007b1f0 t __calloc
000000000007b1f0 T __libc_calloc
000000000007b1f0 W calloc
This change will result in duplicate probes when strong and weak symbols
co-exist in a binary. But I think it's not a big problem since probes
at the weak symbol will never be hit anyway.
Signed-off-by: Namhyung Kim <[email protected]>
Tested-by: Arnaldo Carvalho de Melo <[email protected]>
Cc: David Ahern <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Naohiro Aota <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Masami Hiramatsu <[email protected]>
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
When perf probe tries to add a probe in a binary using symbol name, it
sometimes failed since some symbols were discard during loading dso.
When it resolves an address to symbol, it'd be better to have just one
symbol at given address. But for finding address from symbol, it'd be
better to keep all names (including aliases).
So allow tools to state that they want to allow aliases via
symbol_conf.allow_aliases.
Signed-off-by: Namhyung Kim <[email protected]>
Acked-by: Masami Hiramatsu <[email protected]>
Cc: David Ahern <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Naohiro Aota <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Link: http://lkml.kernel.org/r/[email protected]
[ Original patch passwd allow_alias to many functions, use symbol_conf.allow_aliases instead ]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
This reverts commit 906451b98b67 ("perf probe: Fix to fall back to find probe point in symbols").
Since 'perf probe' now retries with the address of given symbol searched from
map before this path, this fall back routine isn't needed anymore.
Signed-off-by: Masami Hiramatsu <[email protected]>
Cc: David Ahern <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Naohiro Aota <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
Fix perf probe --line to handle aliased symbols correctly in glibc.
This makes line_range search failing back to address-based alternative
search as same as --add and --vars.
Without this patch;
-----
# ./perf probe -x /usr/lib64/libc-2.17.so -L malloc
Specified source line is not found.
Error: Failed to show lines.
-----
With this patch;
-----
# ./perf probe -x /usr/lib64/libc-2.17.so -L malloc
<__libc_malloc@/usr/src/debug/glibc-2.17-c758a686/malloc/malloc.c:0>
0 __libc_malloc(size_t bytes)
1 {
mstate ar_ptr;
void *victim;
__malloc_ptr_t (*hook) (size_t, const __malloc_ptr_t)
6 = force_reg (__malloc_hook);
7 if (__builtin_expect (hook != NULL, 0))
8 return (*hook)(bytes, RETURN_ADDRESS (0));
10 arena_lookup(ar_ptr);
12 arena_lock(ar_ptr, bytes);
-----
Note that this actually shows __libc_malloc, since it is the real
instance of malloc. User can use both __libc_malloc and malloc for
--line.
Signed-off-by: Masami Hiramatsu <[email protected]>
Tested-by: Arnaldo Carvalho de Melo <[email protected]>
Cc: David Ahern <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Naohiro Aota <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
Fix perf probe to handle aliased symbols correctly in glibc. In the
glibc, several symbols are defined as an alias of __libc_XXX, e.g.
malloc is an alias of __libc_malloc.
In such cases, dwarf has no subroutine instances of the alias functions
(e.g. no "malloc" instance), but the map has that symbol and its
address.
Thus, if we search the alieased symbol in debuginfo, we always fail to
find it, but it is in the map.
To solve this problem, this fails back to address-based alternative
search, which searches the symbol in the map, translates its address to
alternative (correct) function name by using debuginfo, and retry to
find the alternative function point from debuginfo.
This adds fail-back process to --vars, --lines and --add options. So,
now you can use those on malloc@libc :)
Without this patch;
-----
# ./perf probe -x /usr/lib64/libc-2.17.so -V malloc
Failed to find the address of malloc
Error: Failed to show vars.
# ./perf probe -x /usr/lib64/libc-2.17.so -a "malloc bytes"
Probe point 'malloc' not found in debuginfo.
Error: Failed to add events.
-----
With this patch;
-----
# ./perf probe -x /usr/lib64/libc-2.17.so -V malloc
Available variables at malloc
@<__libc_malloc+0>
size_t bytes
# ./perf probe -x /usr/lib64/libc-2.17.so -a "malloc bytes"
Added new event:
probe_libc:malloc (on malloc in /usr/lib64/libc-2.17.so with bytes)
You can now use it in all perf tools, such as:
perf record -e probe_libc:malloc -aR sleep 1
-----
Reported-by: Arnaldo Carvalho de Melo <[email protected]>
Signed-off-by: Masami Hiramatsu <[email protected]>
Cc: David Ahern <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Naohiro Aota <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
From perf_session, will be used in 'trace'.
Cc: Adrian Hunter <[email protected]>
Cc: Borislav Petkov <[email protected]>
Cc: David Ahern <[email protected]>
Cc: Don Zickus <[email protected]>
Cc: Frederic Weisbecker <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Stephane Eranian <[email protected]>
Link: http://lkml.kernel.org/n/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
It is set by calling thread__set_comm right before the removed line.
Signed-off-by: Jiri Olsa <[email protected]>
Cc: Adrian Hunter <[email protected]>
Cc: Corey Ashford <[email protected]>
Cc: David Ahern <[email protected]>
Cc: Frederic Weisbecker <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Paul Mackerras <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Stephane Eranian <[email protected]>
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
It is all about flushing the ordered queue or piping it thru, no need
for a perf_session pointer.
Cc: Adrian Hunter <[email protected]>
Cc: Borislav Petkov <[email protected]>
Cc: David Ahern <[email protected]>
Cc: Don Zickus <[email protected]>
Cc: Frederic Weisbecker <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Stephane Eranian <[email protected]>
Link: http://lkml.kernel.org/n/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
So that we can simplify the deliver method to pass just:
(ordered_events, ordered_event, sample);
Cc: Adrian Hunter <[email protected]>
Cc: Borislav Petkov <[email protected]>
Cc: David Ahern <[email protected]>
Cc: Don Zickus <[email protected]>
Cc: Frederic Weisbecker <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Stephane Eranian <[email protected]>
Link: http://lkml.kernel.org/n/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
This reverts commit 5c1de006e8e66b0be05be422416629e344c71652.
While the original commit makes it easier to run cpupower from the
local build directory, it also leaves the binary with a rather poor
rpath of './' in it after it is installed on a system via 'make install'.
This is considered bad practice and can cause cpupower to fail in
rpmbuild with the following error:
ERROR 0004: file '/usr/bin/cpupower' contains an insecure rpath './' in [./]
error: Bad exit status from /var/tmp/rpm-tmp.A6u26r (%install)
Bad exit status from /var/tmp/rpm-tmp.A6u26r (%install)
Developers should be able to use LD_LIBRARY_PATH to achieve the same
effect and not introduce rpath into the binary.
Signed-off-by: Josh Boyer <[email protected]>
Signed-off-by: Rafael J. Wysocki <[email protected]>
|
|
This commit sets CONFIG_RCU_TORTURE_TEST_SLOW_INIT=y, but leaves the
default time zero. This can be overridden by passing the
"--bootargs rcutree.gp_init_delay=1" argument to kvm.sh.
Signed-off-by: Paul E. McKenney <[email protected]>
|
|
On systems which don't implement sys_execveat(), this test produces a
lot of output.
Add a check at the beginning to see if the syscall is present, and if
not just note one error and return.
When we run on a system that doesn't implement the syscall we will get
ENOSYS back from the kernel, so change the logic that handles
__NR_execveat not being defined to also use ENOSYS rather than -ENOSYS.
Signed-off-by: Michael Ellerman <[email protected]>
Acked-by: David Drysdale <[email protected]>
Signed-off-by: Shuah Khan <[email protected]>
|
|
By keeping pointers to machines, evlist and tool in ordered_events.
Cc: Adrian Hunter <[email protected]>
Cc: Borislav Petkov <[email protected]>
Cc: David Ahern <[email protected]>
Cc: Don Zickus <[email protected]>
Cc: Frederic Weisbecker <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Stephane Eranian <[email protected]>
Link: http://lkml.kernel.org/n/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
For use by tools that are not perf.data based, as maybe 'perf trace' in
live mode.
Cc: Adrian Hunter <[email protected]>
Cc: Borislav Petkov <[email protected]>
Cc: David Ahern <[email protected]>
Cc: Don Zickus <[email protected]>
Cc: Frederic Weisbecker <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Stephane Eranian <[email protected]>
Link: http://lkml.kernel.org/n/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
This patch removes unused variables from lsiio.c in order
to get rid of the warnings regarding them.
Signed-off-by: Roberta Dobrescu <[email protected]>
Signed-off-by: Jonathan Cameron <[email protected]>
|
|
Definition of _GNU_SOURCE is needed to get rid of some warnings, such
as:
warning: implicit declaration of function `asprintf'.
generic_buffer.c and iio_event_monitor.c define _GNU_SOURCE,
but it is also needed in lsiio.c and iio_utils.c. For this reason,
this patch adds the definition in Makefile and removes it from where
it already exists.
Signed-off-by: Roberta Dobrescu <[email protected]>
Signed-off-by: Jonathan Cameron <[email protected]>
|
|
This patch moves iio userspace applications out of staging, to tools/iio/
and adds a Makefile in order to compile them easily. It also adds tools/iio/
to MAINTAINERS file.
Signed-off-by: Roberta Dobrescu <[email protected]>
Signed-off-by: Jonathan Cameron <[email protected]>
|
|
This patch fix spelling typo in printk messages.
Signed-off-by: Masanari Iida <[email protected]>
Acked-by: Randy Dunlap <[email protected]>
Signed-off-by: Jiri Kosina <[email protected]>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux into perf/urgent
Pull perf/urgent fix from Arnaldo Carvalho de Melo:
" - Fix SEGFAULT when freeing unparsed lock prefixed instructions in 'perf
annotate' (Arnaldo Carvalho de Melo)"
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
Signed-off-by: Ingo Molnar <[email protected]>
|
|
When annotating source/disasm lines the perf tools parse the output of
objdump, trying to provide augmented output that allows navigating
jumps, calls, etc.
But when a line output by objdump can't be parsed the annotation code
falls back to just presenting the unparsed line.
When fixing a leak in the 0fb9f2aab738 commit ("perf annotate: Fix
memory leaks in LOCK handling") we failed to take that into account and
instead tried to free one of the data structures that should be freed
only when successfully allocated, oops, segfault.
There was a change in the way the objdump output for lock prefixed
instructions is formatted that lead the relevant parser to fail to grok
it.
At least RHEL7 works ok, but Fedora 20 segfaults.
Fix it by making the ins__delete() destructor work like the most basic
destructor: free().
Namely make it accept a NULL pointer and when handling it just do
nothing.
Further investigation is needed to figure out the nature of the objdump
output change so as to make the parser grok it.
Reported-by: Linus Torvalds <[email protected]>
Cc: David Ahern <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Paul Mackerras <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Rabin Vincent <[email protected]>
Link: http://lkml.kernel.org/n/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/bp/bp into x86/asm
Pull alternative instructions framework improvements from Borislav Petkov:
"A more involved rework of the alternatives framework to be able to
pad instructions and thus make using the alternatives macros more
straightforward and without having to figure out old and new instruction
sizes but have the toolchain figure that out for us.
Furthermore, it optimizes JMPs used so that fetch and decode can be
relieved with smaller versions of the JMPs, where possible.
Some stats:
x86_64 defconfig:
Alternatives sites total: 2478
Total padding added (in Bytes): 6051
The padding is currently done for:
X86_FEATURE_ALWAYS
X86_FEATURE_ERMS
X86_FEATURE_LFENCE_RDTSC
X86_FEATURE_MFENCE_RDTSC
X86_FEATURE_SMAP
This is with the latest version of the patchset. Of course, on each
machine the alternatives sites actually being patched are a proper
subset of the total number."
Signed-off-by: Ingo Molnar <[email protected]>
|
|
Parentheses are special to bash, so use an overflow flag that doesn't
use them.
Signed-off-by: Paul E. McKenney <[email protected]>
|
|
perf bench mem mem{set,cpy} -r all thus runs all available mem
benchmarking routines.
Reviewed-by: Hitoshi Mitake <[email protected]>
Signed-off-by: Borislav Petkov <[email protected]>
|
|
... so that we can call it multiple times. See next patch.
Reviewed-by: Hitoshi Mitake <[email protected]>
Signed-off-by: Borislav Petkov <[email protected]>
|
|
Adjust perf bench to the new changes in the alternatives code for
memcpy/memset.
Reviewed-by: Hitoshi Mitake <[email protected]>
Signed-off-by: Borislav Petkov <[email protected]>
|
|
We were keeping the session around just because we kept pointers to
struct thread instances, but now we reference count them, so no need
for deferring the perf_session__delete call to after we traverse the
work_list entries.
Cc: Adrian Hunter <[email protected]>
Cc: Borislav Petkov <[email protected]>
Cc: David Ahern <[email protected]>
Cc: Don Zickus <[email protected]>
Cc: Frederic Weisbecker <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Stephane Eranian <[email protected]>
Link: http://lkml.kernel.org/n/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
We need to do that to stop accumulating entries in the dead_threads
linked list, i.e. we were keeping references to threads in struct hists
that continue to exist even after a thread exited and was removed from
the machine threads rbtree.
We still keep the dead_threads list, but just for debugging, allowing us
to iterate at any given point over the threads that still are referenced
by things like struct hist_entry.
Cc: Adrian Hunter <[email protected]>
Cc: Borislav Petkov <[email protected]>
Cc: David Ahern <[email protected]>
Cc: Don Zickus <[email protected]>
Cc: Frederic Weisbecker <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Stephane Eranian <[email protected]>
Link: http://lkml.kernel.org/n/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/evalenti/linux-soc-thermal
Pull thermal management fixes from Eduardo Valentin:
"Specifics:
- Several fixes in tmon tool.
- Fixes in intel int340x for _ART and _TRT tables.
- Add id for Avoton SoC into powerclamp driver.
- Fixes in RCAR thermal driver to remove race conditions and fix fail
path
- Fixes in TI thermal driver: removal of unnecessary code and build
fix if !CONFIG_PM_SLEEP
- Cleanups in exynos thermal driver
- Add stubs for include/linux/thermal.h. Now drivers using thermal
calls but that also work without CONFIG_THERMAL will be able to
compile for systems that don't care about thermal.
Note: I am sending this pull on Rui's behalf while he fixes issues in
his Linux box"
* 'fixes-for-4.0-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/evalenti/linux-soc-thermal:
thermal: int340x_thermal: Ignore missing _ART, _TRT tables
thermal/intel_powerclamp: add id for Avoton SoC
tools/thermal: tmon: silence 'set but not used' warnings
tools/thermal: tmon: use pkg-config to determine library dependencies
tools/thermal: tmon: support cross-compiling
tools/thermal: tmon: add .gitignore
tools/thermal: tmon: fixup tui windowing calculations
tools/thermal: tmon: tui: don't hard-code dialog window size assumptions
tools/thermal: tmon: add min/max macros
tools/thermal: tmon: add --target-temp parameter
thermal: exynos: Clean-up code to use oneline entry for exynos compatible table
thermal: rcar: Make error and remove paths symmetrical with init
thermal: rcar: Fix race condition between init and interrupt
thermal: Introduce dummy functions when thermal is not defined
ti-soc-thermal: Delete an unnecessary check before the function call "cpufreq_cooling_unregister"
thermal: ti-soc-thermal: bandgap: Fix build warning if !CONFIG_PM_SLEEP
|
|
Feature tests are compiled but not executed, however it might avoid a
future uninitialized variable warning, so initialize the cpu set.
Reported-by: Ingo Molnar <[email protected]>
Signed-off-by: Adrian Hunter <[email protected]>
Cc: H. Peter Anvin <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: Stephane Eranian <[email protected]>
Cc: Thomas Gleixner <[email protected]>
Cc: [email protected]
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
Remove bias offset to find probe point by address.
Without this patch, probe points on kernel and executables are shown
correctly, but do not work with libraries:
# ./perf probe -l
probe:do_fork (on do_fork@kernel/fork.c)
probe_libc:malloc (on malloc in /usr/lib64/libc-2.17.so)
probe_perf:strlist__new (on strlist__new@util/strlist.c in /home/mhiramat/ksrc/linux-3/tools/perf/perf)
Removing bias allows it to show it as real place:
# ./perf probe -l
probe:do_fork (on do_fork@kernel/fork.c)
probe_libc:malloc (on __libc_malloc@malloc/malloc.c in /usr/lib64/libc-2.17.so)
probe_perf:strlist__new (on strlist__new@util/strlist.c in /home/mhiramat/ksrc/linux-3/tools/perf/perf)
Signed-off-by: Masami Hiramatsu <[email protected]>
Cc: David Ahern <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Naohiro Aota <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
Warn if given uprobe event accesses memory on older kernel.
Until 3.14, uprobe event only supports accessing registers so this warns
to upgrade kernel if uprobe-event returns -EINVAL and an argument of the
event accesses memory ($stack, @+offset, and +|-offs() symtax).
With this patch (on 3.10.0-123.13.2.el7.x86_64);
-----
# ./perf probe -x ./perf warn_uprobe_event_compat stack=-0\(%sp\)
Added new event:
Failed to write event: Invalid argument
Please upgrade your kernel to at least 3.14 to have access to feature -0(%sp)
Error: Failed to add events.
-----
Suggested-by: Arnaldo Carvalho de Melo <[email protected]>
Signed-off-by: Masami Hiramatsu <[email protected]>
Cc: David Ahern <[email protected]>
Cc: Jiri Olsa <[email protected]>
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
On Debian-ish systems libbabeltrace-dev should be suggested as a package
install as well.
Signed-off-by: Ingo Molnar <[email protected]>
Cc: David Ahern <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
Certain feature tests fail with link errors:
triton:~/tip/tools/perf/config/feature-checks> make test-libbabeltrace.bin
gcc -MD -o test-libbabeltrace.bin test-libbabeltrace.c # -lbabeltrace provided by
/tmp/cc6dRSqd.o: In function `main':
test-libbabeltrace.c:(.text+0xf): undefined reference to `bt_ctf_stream_class_get_packet_context_type'
although they should already fail with a build error due to lack of a
proper prototype for the function. Due to this I first tried to find
which library was missing - while it was the whole feature that was
missing from the .h file already.
To solve this, propagate -Wall -Werror to all testcases and remove them
from testcase Makefile rules that used them explicitly.
A missing feature now outputs:
triton:~/tip/tools/perf/config/feature-checks> make test-libbabeltrace.bin
gcc -MD -Wall -Werror -o test-libbabeltrace.bin test-libbabeltrace.c # -lbabeltrace provided by
test-libbabeltrace.c: In function ‘main’:
test-libbabeltrace.c:6:2: error: implicit declaration of function ‘bt_ctf_stream_class_get_packet_context_type’ [-Werror=implicit-function-declaration]
Signed-off-by: Ingo Molnar <[email protected]>
Cc: David Ahern <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
Before:
No bfd.h/libbfd found, install binutils-dev[el]/zlib-static to gain symbol demangling
After:
No bfd.h/libbfd found, please install binutils-dev[el]/zlib-static/libiberty-dev to gain symbol demangling
Change the message to the standard 'please install' language and also
add libiberty-dev suggestion for Ubuntu systems.
Signed-off-by: Ingo Molnar <[email protected]>
Cc: David Ahern <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
Before:
Missing perl devel files. Disabling perl scripting support, consider installing perl-ExtUtils-Embed
After:
Missing perl devel files. Disabling perl scripting support, please install perl-ExtUtils-Embed/libperl-dev
Change the message to the standard 'please install' language and
adds Debian-ish package suggestion.
Signed-off-by: Ingo Molnar <[email protected]>
Cc: David Ahern <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
Change the Python detection message from:
config/Makefile:566: No python-config tool was found
config/Makefile:566: Python support will not be built
config/Makefile:565: No 'python-config' tool was found: disables Python support - please install python-devel/python-dev
It's now a standard one-line message with a package install suggestion,
and it also uses the standard language used by other feature detection
messages.
Signed-off-by: Ingo Molnar <[email protected]>
Cc: David Ahern <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
This message:
Makefile:153: The path 'python-config' is not executable.
Appears on every perf build that does not have a sufficient python
environment installed. It's really just an internal detail of python
configuration pass and users should not see it - and it's pretty
meaningless to them in any case because the message is not very helpful.
(So it's not executable. Why does that matter? What can the user do
about it?)
Remove the warning, the missing python feature warning is sufficient:
config/Makefile:566: No python-config tool was found
config/Makefile:566: Python support will not be built
although even that one isn't very helpful to users: so no Python support
will be built, what can the user do to fix that? Most other such
warnings give package install suggestions.
Signed-off-by: Ingo Molnar <[email protected]>
Cc: David Ahern <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
It's an auto-generated file.
Signed-off-by: Ingo Molnar <[email protected]>
Cc: David Ahern <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|