aboutsummaryrefslogtreecommitdiff
path: root/tools
AgeCommit message (Collapse)AuthorFilesLines
2021-10-08selftests: forwarding: Add IPv6 GRE flat testsAmit Cohen4-0/+465
Add tests that check IPv6-in-IPv6, IPv4-in-IPv6 and MTU change of GRE tunnel. The tests use flat model - overlay and underlay share the same VRF. These tests can be run with TC_FLAG=skip_sw, so then they will verify that packets go through hardware as part of enacp and decap phases. Signed-off-by: Amit Cohen <[email protected]> Reviewed-by: Petr Machata <[email protected]> Signed-off-by: Ido Schimmel <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2021-10-08testing: selftests: tc_common: Add tc_check_at_least_x_packets()Amit Cohen1-0/+10
Add function that checks that at least X packets hit the tc rule. There are cases that it is not possible to catch only the interesting packets, so then, it is possible to send many packets and verify that at least this amount of packets hit the rule. This function will be used in the next patch for general tc rule that can be used to test both software and hardware. Signed-off-by: Amit Cohen <[email protected]> Reviewed-by: Petr Machata <[email protected]> Signed-off-by: Ido Schimmel <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2021-10-08testing: selftests: forwarding.config.sample: Add tc flagAmit Cohen1-0/+3
Add TC_FLAG value to tests topology. This flag supposed to be skip_sw/skip_hw which means do not filter by software/hardware. This can be useful for adding tests to forwarding directory, and be able to verify that packets go through the hardware. When the flag is not set or set to 'skip_hw', tests can still be executed with veth pairs. Signed-off-by: Amit Cohen <[email protected]> Reviewed-by: Petr Machata <[email protected]> Signed-off-by: Ido Schimmel <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2021-10-08perf test evlist-open-close: Use inline func to convert timeval to usecRiccardo Mancini1-1/+6
This patch introduces a new inline function to convert a timeval to usec. This function will be used also in the next patch. Signed-off-by: Riccardo Mancini <[email protected]> Cc: Ian Rogers <[email protected]> Cc: Jiri Olsa <[email protected]> Cc: Mark Rutland <[email protected]> Cc: Namhyung Kim <[email protected]> Cc: Peter Zijlstra <[email protected]> Link: http://lore.kernel.org/lkml/b95035ec4a125355be8ea843f7275c4580da6398.1629490974.git.rickyman7@gmail.com Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2021-10-08perf mmap: Introduce mmap_cpu_mask__duplicate()Riccardo Mancini2-0/+14
This patch adds a new function in util/mmap.c to duplicate a mmap_cpu_mask. This new function will be used in patches in the workqueue patchkit. Signed-off-by: Riccardo Mancini <[email protected]> Cc: Ian Rogers <[email protected]> Cc: Jiri Olsa <[email protected]> Cc: Mark Rutland <[email protected]> Cc: Namhyung Kim <[email protected]> Cc: Peter Zijlstra <[email protected]> Link: http://lore.kernel.org/lkml/8943a548ef7a3dd3e015095afad7e9a8b2154c05.1629490974.git.rickyman7@gmail.com [ bitmap_alloc() was renamed to bitmap_zalloc() ] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2021-10-08libperf cpumap: Use binary search in perf_cpu_map__idx() as array are sortedRiccardo Mancini1-4/+12
Since 7074674e7338863e ("perf cpumap: Maintain cpumaps ordered and without dups") perf_cpu_map elements are sorted in ascending order. This patch improves perf_cpu_map__idx() by using a binary search. Signed-off-by: Riccardo Mancini <[email protected]> Cc: Andi Kleen <[email protected]> Cc: Ian Rogers <[email protected]> Cc: Jiri Olsa <[email protected]> Cc: Mark Rutland <[email protected]> Cc: Namhyung Kim <[email protected]> Cc: Peter Zijlstra <[email protected]> Link: http://lore.kernel.org/lkml/f1543c15797169c21e8b205a4a6751159180580d.1629490974.git.rickyman7@gmail.com [ Removed 'else' after if + return, declared variables where needed ] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2021-10-08Merge remote-tracking branch 'torvalds/master' into perf/coreArnaldo Carvalho de Melo61-229/+1590
To pick up the fixes in perf/urgent that were just merged into upstream. Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2021-10-07selftests/bpf: Remove SEC("version") from test progsDave Marchevsky40-61/+0
Since commit 6c4fc209fcf9d ("bpf: remove useless version check for prog load") these "version" sections, which result in bpf_attr.kern_version being set, have been unnecessary. Remove them so that it's obvious to folks using selftests as a guide that "modern" BPF progs don't need this section. Signed-off-by: Dave Marchevsky <[email protected]> Signed-off-by: Andrii Nakryiko <[email protected]> Link: https://lore.kernel.org/bpf/[email protected]
2021-10-07selftests/bpf: Skip the second half of get_branch_snapshot in vmSong Liu1-0/+34
VMs running on upstream 5.12+ kernel support LBR. However, bpf_get_branch_snapshot couldn't stop the LBR before too many entries are flushed. Skip the hit/waste test for VMs before we find a proper fix for LBR in VM. Fixes: 025bd7c753aa ("selftests/bpf: Add test for bpf_get_branch_snapshot") Signed-off-by: Song Liu <[email protected]> Signed-off-by: Andrii Nakryiko <[email protected]> Link: https://lore.kernel.org/bpf/[email protected]
2021-10-07Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski14-75/+542
No conflicts. Signed-off-by: Jakub Kicinski <[email protected]>
2021-10-07Merge tag 'perf-tools-fixes-for-v5.15-2021-10-07' of ↵Linus Torvalds8-54/+445
git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux Pull perf tools fixes from Arnaldo Carvalho de Melo: - Fix plugin static linking with libopencsd on ARM and ARM64 - Add missing -lstdc++ when linking with libopencsd - Add missing topdown metrics events to 'perf test attr' - Plug leak sys_event_tables list after processing JSON vendor events entries - Sync sound/asound.h copy with the kernel sources * tag 'perf-tools-fixes-for-v5.15-2021-10-07' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux: perf tests attr: Add missing topdown metrics events tools include UAPI: Sync sound/asound.h copy with the kernel sources perf build: Fix plugin static linking with libopencsd on ARM and ARM64 perf build: Add missing -lstdc++ when linking with libopencsd perf jevents: Free the sys_event_tables list after processing entries
2021-10-07Merge tag 'net-5.15-rc5' of ↵Linus Torvalds2-1/+3
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net Pull networking fixes from Jakub Kicinski: "Including fixes from xfrm, bpf, netfilter, and wireless. Current release - regressions: - xfrm: fix XFRM_MSG_MAPPING ABI breakage caused by inserting a new value in the middle of an enum - unix: fix an issue in unix_shutdown causing the other end read/write failures - phy: mdio: fix memory leak Current release - new code bugs: - mlx5e: improve MQPRIO resiliency against bad configs Previous releases - regressions: - bpf: fix integer overflow leading to OOB access in map element pre-allocation - stmmac: dwmac-rk: fix ethernet on rk3399 based devices - netfilter: conntrack: fix boot failure with nf_conntrack.enable_hooks=1 - brcmfmac: revert using ISO3166 country code and 0 rev as fallback - i40e: fix freeing of uninitialized misc IRQ vector - iavf: fix double unlock of crit_lock Previous releases - always broken: - bpf, arm: fix register clobbering in div/mod implementation - netfilter: nf_tables: correct issues in netlink rule change event notifications - dsa: tag_dsa: fix mask for trunked packets - usb: r8152: don't resubmit rx immediately to avoid soft lockup on device unplug - i40e: fix endless loop under rtnl if FW fails to correctly respond to capability query - mlx5e: fix rx checksum offload coexistence with ipsec offload - mlx5: force round second at 1PPS out start time and allow it only in supported clock modes - phy: pcs: xpcs: fix incorrect CL37 AN sequence, EEE disable sequence Misc: - xfrm: slightly rejig the new policy uAPI to make it less cryptic" * tag 'net-5.15-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (66 commits) net: prefer socket bound to interface when not in VRF iavf: fix double unlock of crit_lock i40e: Fix freeing of uninitialized misc IRQ vector i40e: fix endless loop under rtnl dt-bindings: net: dsa: marvell: fix compatible in example ionic: move filter sync_needed bit set gve: report 64bit tx_bytes counter from gve_handle_report_stats() gve: fix gve_get_stats() rtnetlink: fix if_nlmsg_stats_size() under estimation gve: Properly handle errors in gve_assign_qpl gve: Avoid freeing NULL pointer gve: Correct available tx qpl check unix: Fix an issue in unix_shutdown causing the other end read/write failures net: stmmac: trigger PCS EEE to turn off on link down net: pcs: xpcs: fix incorrect steps on disable EEE netlink: annotate data races around nlk->bound net: pcs: xpcs: fix incorrect CL37 AN sequence net: sfp: Fix typo in state machine debug string net/sched: sch_taprio: properly cancel timer from taprio_destroy() net: bridge: fix under estimation in br_get_linkxstats_size() ...
2021-10-07Merge https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpfJakub Kicinski2-1/+3
Daniel Borkmann says: ==================== pull-request: bpf 2021-10-07 We've added 7 non-merge commits during the last 8 day(s) which contain a total of 8 files changed, 38 insertions(+), 21 deletions(-). The main changes are: 1) Fix ARM BPF JIT to preserve caller-saved regs for DIV/MOD JIT-internal helper call, from Johan Almbladh. 2) Fix integer overflow in BPF stack map element size calculation when used with preallocation, from Tatsuhiko Yasumatsu. 3) Fix an AF_UNIX regression due to added BPF sockmap support related to shutdown handling, from Jiang Wang. 4) Fix a segfault in libbpf when generating light skeletons from objects without BTF, from Kumar Kartikeya Dwivedi. 5) Fix a libbpf memory leak in strset to free the actual struct strset itself, from Andrii Nakryiko. 6) Dual-license bpf_insn.h similarly as we did for libbpf and bpftool, with ACKs from all contributors, from Luca Boccassi. ==================== Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2021-10-07selftests: futex: Test sys_futex_waitv() wouldblockAndré Almeida1-4/+37
Test if futex_waitv() returns -EWOULDBLOCK correctly when the expected value is different from the actual value for a waiter. Signed-off-by: André Almeida <[email protected]> Signed-off-by: Peter Zijlstra (Intel) <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2021-10-07selftests: futex: Test sys_futex_waitv() timeoutAndré Almeida1-1/+20
Test if the futex_waitv timeout is working as expected, using the supported clockid options. Signed-off-by: André Almeida <[email protected]> Signed-off-by: Peter Zijlstra (Intel) <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2021-10-07selftests: futex: Add sys_futex_waitv() testAndré Almeida5-1/+265
Create a new file to test the waitv mechanism. Test both private and shared futexes. Wake the last futex in the array, and check if the return value from futex_waitv() is the right index. Signed-off-by: André Almeida <[email protected]> Signed-off-by: Peter Zijlstra (Intel) <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2021-10-07selftests: arm64: Add coverage of ptrace flags for SVE VL inheritanceMark Brown1-1/+54
Add a test that covers enabling and disabling of SVE vector length inheritance via the ptrace interface. Signed-off-by: Mark Brown <[email protected]> Acked-by: Catalin Marinas <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Will Deacon <[email protected]>
2021-10-06objtool: Update section header before relocationsMichael Forney1-29/+17
The libelf implementation from elftoolchain has a safety check in gelf_update_rel[a] to check that the data corresponds to a section that has type SHT_REL[A] [0]. If the relocation is updated before the section header is updated with the proper type, this check fails. To fix this, update the section header first, before the relocations. Previously, the section size was calculated in elf_rebuild_reloc_section by counting the number of entries in the reloc_list. However, we now need the size during elf_write so instead keep a running total and add to it for every new relocation. [0] https://sourceforge.net/p/elftoolchain/mailman/elftoolchain-developers/thread/CAGw6cBtkZro-8wZMD2ULkwJ39J+tHtTtAWXufMjnd3cQ7XG54g@mail.gmail.com/ Signed-off-by: Michael Forney <[email protected]> Reviewed-by: Miroslav Benes <[email protected]> Signed-off-by: Josh Poimboeuf <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2021-10-06objtool: Check for gelf_update_rel[a] failuresMichael Forney1-2/+8
Otherwise, if these fail we end up with garbage data in the .rela.orc_unwind_ip section, leading to errors like ld: fs/squashfs/namei.o: bad reloc symbol index (0x7f16 >= 0x12) for offset 0x7f16d5c82cc8 in section `.orc_unwind_ip' Signed-off-by: Michael Forney <[email protected]> Reviewed-by: Miroslav Benes <[email protected]> Signed-off-by: Josh Poimboeuf <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2021-10-07Merge branch 'objtool/urgent'Peter Zijlstra77-426/+1589
Fixup conflicts. # Conflicts: # tools/objtool/check.c
2021-10-06selftests/bpf: Switch to new bpf_object__next_{map,program} APIsHengqi Chen7-9/+9
Replace deprecated bpf_{map,program}__next APIs with newly added bpf_object__next_{map,program} APIs, so that no compilation warnings emit. Signed-off-by: Hengqi Chen <[email protected]> Signed-off-by: Andrii Nakryiko <[email protected]> Acked-by: Song Liu <[email protected]> Link: https://lore.kernel.org/bpf/[email protected]
2021-10-06libbpf: Deprecate bpf_{map,program}__{prev,next} APIs since v0.7Hengqi Chen3-12/+51
Deprecate bpf_{map,program}__{prev,next} APIs. Replace them with a new set of APIs named bpf_object__{prev,next}_{program,map} which follow the libbpf API naming convention ([0]). No functionality changes. [0] Closes: https://github.com/libbpf/libbpf/issues/296 Signed-off-by: Hengqi Chen <[email protected]> Signed-off-by: Andrii Nakryiko <[email protected]> Acked-by: Song Liu <[email protected]> Link: https://lore.kernel.org/bpf/[email protected]
2021-10-06libbpf: Deprecate bpf_object__unload() API since v0.6Hengqi Chen2-3/+6
BPF objects are not reloadable after unload. Users are expected to use bpf_object__close() to unload and free up resources in one operation. No need to expose bpf_object__unload() as a public API, deprecate it ([0]). Add bpf_object__unload() as an alias to internal bpf_object_unload() and replace all bpf_object__unload() uses to avoid compilation errors. [0] Closes: https://github.com/libbpf/libbpf/issues/290 Signed-off-by: Hengqi Chen <[email protected]> Signed-off-by: Andrii Nakryiko <[email protected]> Acked-by: Song Liu <[email protected]> Link: https://lore.kernel.org/bpf/[email protected]
2021-10-06selftest/bpf: Switch recursion test to use htab_map_delete_elemJiri Olsa2-11/+8
Currently the recursion test is hooking __htab_map_lookup_elem function, which is invoked both from bpf_prog and bpf syscall. But in our kernel build, the __htab_map_lookup_elem gets inlined within the htab_map_lookup_elem, so it's not trigered and the test fails. Fixing this by using htab_map_delete_elem, which is not inlined for bpf_prog calls (like htab_map_lookup_elem is) and is used directly as pointer for map_delete_elem, so it won't disappear by inlining. Signed-off-by: Jiri Olsa <[email protected]> Signed-off-by: Andrii Nakryiko <[email protected]> Acked-by: Song Liu <[email protected]> Link: https://lore.kernel.org/bpf/YVnfFTL/3T6jOwHI@krava
2021-10-06bpf: Use $(pound) instead of \# in MakefilesQuentin Monnet1-2/+2
Recent-ish versions of make do no longer consider number signs ("#") as comment symbols when they are inserted inside of a macro reference or in a function invocation. In such cases, the symbols should not be escaped. There are a few occurrences of "\#" in libbpf's and samples' Makefiles. In the former, the backslash is harmless, because grep associates no particular meaning to the escaped symbol and reads it as a regular "#". In samples' Makefile, recent versions of make will pass the backslash down to the compiler, making the probe fail all the time and resulting in the display of a warning about "make headers_install" being required, even after headers have been installed. A similar issue has been addressed at some other locations by commit 9564a8cf422d ("Kbuild: fix # escaping in .cmd files for future Make"). Let's address it for libbpf's and samples' Makefiles in the same fashion, by using a "$(pound)" variable (pulled from tools/scripts/Makefile.include for libbpf, or re-defined for the samples). Reference for the change in make: https://git.savannah.gnu.org/cgit/make.git/commit/?id=c6966b323811c37acedff05b57 Fixes: 2f3830412786 ("libbpf: Make libbpf_version.h non-auto-generated") Fixes: 07c3bbdb1a9b ("samples: bpf: print a warning about headers_install") Signed-off-by: Quentin Monnet <[email protected]> Signed-off-by: Andrii Nakryiko <[email protected]> Link: https://lore.kernel.org/bpf/[email protected]
2021-10-06selftests/bpf: Test new btf__add_btf() APIAndrii Nakryiko1-0/+86
Add a test that validates that btf__add_btf() API is correctly copying all the types from the source BTF into destination BTF object and adjusts type IDs and string offsets properly. Signed-off-by: Andrii Nakryiko <[email protected]> Signed-off-by: Daniel Borkmann <[email protected]> Link: https://lore.kernel.org/bpf/[email protected]
2021-10-06selftests/bpf: Refactor btf_write selftest to reuse BTF generation logicAndrii Nakryiko1-6/+49
Next patch will need to reuse BTF generation logic, which tests every supported BTF kind, for testing btf__add_btf() APIs. So restructure existing selftests and make it as a single subtest that uses bulk VALIDATE_RAW_BTF() macro for raw BTF dump checking. Signed-off-by: Andrii Nakryiko <[email protected]> Signed-off-by: Daniel Borkmann <[email protected]> Acked-by: Song Liu <[email protected]> Link: https://lore.kernel.org/bpf/[email protected]
2021-10-06libbpf: Add API that copies all BTF types from one BTF object to anotherAndrii Nakryiko3-2/+135
Add a bulk copying api, btf__add_btf(), that speeds up and simplifies appending entire contents of one BTF object to another one, taking care of copying BTF type data, adjusting resulting BTF type IDs according to their new locations in the destination BTF object, as well as copying and deduplicating all the referenced strings and updating all the string offsets in new BTF types as appropriate. This API is intended to be used from tools that are generating and otherwise manipulating BTFs generically, such as pahole. In pahole's case, this API is useful for speeding up parallelized BTF encoding, as it allows pahole to offload all the intricacies of BTF type copying to libbpf and handle the parallelization aspects of the process. Signed-off-by: Andrii Nakryiko <[email protected]> Signed-off-by: Daniel Borkmann <[email protected]> Acked-by: Song Liu <[email protected]> Cc: Arnaldo Carvalho de Melo <[email protected]> Link: https://lore.kernel.org/bpf/[email protected]
2021-10-06bpf, x64: Save bytes for DIV by reducing reg copiesJie Meng1-0/+47
Instead of unconditionally performing push/pop on %rax/%rdx in case of division/modulo, we can save a few bytes in case of destination register being either BPF r0 (%rax) or r3 (%rdx) since the result is written in there anyway. Also, we do not need to copy the source to %r11 unless the source is either %rax, %rdx or an immediate. For example, before the patch: 22: push %rax 23: push %rdx 24: mov %rsi,%r11 27: xor %edx,%edx 29: div %r11 2c: mov %rax,%r11 2f: pop %rdx 30: pop %rax 31: mov %r11,%rax After: 22: push %rdx 23: xor %edx,%edx 25: div %rsi 28: pop %rdx Signed-off-by: Jie Meng <[email protected]> Signed-off-by: Alexei Starovoitov <[email protected]> Signed-off-by: Daniel Borkmann <[email protected]> Tested-by: Daniel Borkmann <[email protected]> Acked-by: Daniel Borkmann <[email protected]> Link: https://lore.kernel.org/bpf/[email protected]
2021-10-06x86/insn: Use get_unaligned() instead of memcpy()Borislav Petkov3-2/+28
Use get_unaligned() instead of memcpy() to access potentially unaligned memory, which, when accessed through a pointer, leads to undefined behavior. get_unaligned() describes much better what is happening there anyway even if memcpy() does the job. In addition, since perf tool builds with -Werror, it would fire with: util/intel-pt-decoder/../../../arch/x86/lib/insn.c: In function '__insn_get_emulate_prefix': tools/include/../include/asm-generic/unaligned.h:10:15: error: packed attribute is unnecessary [-Werror=packed] 10 | const struct { type x; } __packed *__pptr = (typeof(__pptr))(ptr); \ because -Werror=packed would complain if the packed attribute would have no effect on the layout of the structure. In this case, that is intentional so disable the warning only for that compilation unit. That part is Reported-by: Stephen Rothwell <[email protected]> No functional changes. Fixes: 5ba1071f7554 ("x86/insn, tools/x86: Fix undefined behavior due to potential unaligned accesses") Suggested-by: Linus Torvalds <[email protected]> Signed-off-by: Borislav Petkov <[email protected]> Acked-by: Masami Hiramatsu <[email protected]> Tested-by: Stephen Rothwell <[email protected]> Link: https://lkml.kernel.org/r/[email protected]
2021-10-05bpf: selftests: Add selftests for module kfunc supportKumar Kartikeya Dwivedi6-30/+126
This adds selftests that tests the success and failure path for modules kfuncs (in presence of invalid kfunc calls) for both libbpf and gen_loader. It also adds a prog_test kfunc_btf_id_list so that we can add module BTF ID set from bpf_testmod. This also introduces a couple of test cases to verifier selftests for validating whether we get an error or not depending on if invalid kfunc call remains after elimination of unreachable instructions. Signed-off-by: Kumar Kartikeya Dwivedi <[email protected]> Signed-off-by: Alexei Starovoitov <[email protected]> Link: https://lore.kernel.org/bpf/[email protected]
2021-10-05libbpf: Update gen_loader to emit BTF_KIND_FUNC relocationsKumar Kartikeya Dwivedi3-58/+280
This change updates the BPF syscall loader to relocate BTF_KIND_FUNC relocations, with support for weak kfunc relocations. The general idea is to move map_fds to loader map, and also use the data for storing kfunc BTF fds. Since both reuse the fd_array parameter, they need to be kept together. For map_fds, we reserve MAX_USED_MAPS slots in a region, and for kfunc, we reserve MAX_KFUNC_DESCS. This is done so that insn->off has more chances of being <= INT16_MAX than treating data map as a sparse array and adding fd as needed. When the MAX_KFUNC_DESCS limit is reached, we fall back to the sparse array model, so that as long as it does remain <= INT16_MAX, we pass an index relative to the start of fd_array. We store all ksyms in an array where we try to avoid calling the bpf_btf_find_by_name_kind helper, and also reuse the BTF fd that was already stored. This also speeds up the loading process compared to emitting calls in all cases, in later tests. Signed-off-by: Kumar Kartikeya Dwivedi <[email protected]> Signed-off-by: Alexei Starovoitov <[email protected]> Link: https://lore.kernel.org/bpf/[email protected]
2021-10-05libbpf: Resolve invalid weak kfunc calls with imm = 0, off = 0Kumar Kartikeya Dwivedi1-11/+13
Preserve these calls as it allows verifier to succeed in loading the program if they are determined to be unreachable after dead code elimination during program load. If not, the verifier will fail at runtime. This is done for ext->is_weak symbols similar to the case for variable ksyms. Signed-off-by: Kumar Kartikeya Dwivedi <[email protected]> Signed-off-by: Alexei Starovoitov <[email protected]> Acked-by: Andrii Nakryiko <[email protected]> Link: https://lore.kernel.org/bpf/[email protected]
2021-10-05libbpf: Support kernel module function callsKumar Kartikeya Dwivedi4-24/+72
This patch adds libbpf support for kernel module function call support. The fd_array parameter is used during BPF program load to pass module BTFs referenced by the program. insn->off is set to index into this array, but starts from 1, because insn->off as 0 is reserved for btf_vmlinux. We try to use existing insn->off for a module, since the kernel limits the maximum distinct module BTFs for kfuncs to 256, and also because index must never exceed the maximum allowed value that can fit in insn->off (INT16_MAX). In the future, if kernel interprets signed offset as unsigned for kfunc calls, this limit can be increased to UINT16_MAX. Also introduce a btf__find_by_name_kind_own helper to start searching from module BTF's start id when we know that the BTF ID is not present in vmlinux BTF (in find_ksym_btf_id). Signed-off-by: Kumar Kartikeya Dwivedi <[email protected]> Signed-off-by: Alexei Starovoitov <[email protected]> Link: https://lore.kernel.org/bpf/[email protected]
2021-10-05tools: Allow specifying base BTF file in resolve_btfidsKumar Kartikeya Dwivedi2-10/+20
This commit allows specifying the base BTF for resolving btf id lists/sets during link time in the resolve_btfids tool. The base BTF is set to NULL if no path is passed. This allows resolving BTF ids for module kernel objects. Also, drop the --no-fail option, as it is only used in case .BTF_ids section is not present, instead make no-fail the default mode. The long option name is same as that of pahole. Signed-off-by: Kumar Kartikeya Dwivedi <[email protected]> Signed-off-by: Alexei Starovoitov <[email protected]> Acked-by: Andrii Nakryiko <[email protected]> Link: https://lore.kernel.org/bpf/[email protected]
2021-10-05objtool: Remove redundant 'len' field from struct sectionJoe Lawrence5-20/+17
The section structure already contains sh_size, so just remove the extra 'len' member that requires extra mirroring and potential confusion. Suggested-by: Josh Poimboeuf <[email protected]> Signed-off-by: Joe Lawrence <[email protected]> Reviewed-by: Miroslav Benes <[email protected]> Signed-off-by: Josh Poimboeuf <[email protected]> Link: https://lore.kernel.org/r/[email protected] Cc: Andy Lavr <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: [email protected] Cc: [email protected]
2021-10-05objtool: Make .altinstructions section entry size consistentJoe Lawrence1-1/+1
Commit e31694e0a7a7 ("objtool: Don't make .altinstructions writable") aligned objtool-created and kernel-created .altinstructions section flags, but there remains a minor discrepency in their use of a section entry size: objtool sets one while the kernel build does not. While sh_entsize of sizeof(struct alt_instr) seems intuitive, this small deviation can cause failures with external tooling (kpatch-build). Fix this by creating new .altinstructions sections with sh_entsize of 0 and then later updating sec->sh_size as alternatives are added to the section. An added benefit is avoiding the data descriptor and buffer created by elf_create_section(), but previously unused by elf_add_alternative(). Fixes: 9bc0bb50727c ("objtool/x86: Rewrite retpoline thunk calls") Signed-off-by: Joe Lawrence <[email protected]> Reviewed-by: Miroslav Benes <[email protected]> Signed-off-by: Josh Poimboeuf <[email protected]> Link: https://lore.kernel.org/r/[email protected] Cc: Andy Lavr <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: [email protected] Cc: [email protected]
2021-10-05objtool: Remove reloc symbol type checks in get_alt_entry()Josh Poimboeuf1-29/+7
Converting a special section's relocation reference to a symbol is straightforward. No need for objtool to complain that it doesn't know how to handle it. Just handle it. This fixes the following warning: arch/x86/kvm/emulate.o: warning: objtool: __ex_table+0x4: don't know how to handle reloc symbol type: kvm_fastop_exception Fixes: 24ff65257375 ("objtool: Teach get_alt_entry() about more relocation types") Reported-by: Linus Torvalds <[email protected]> Signed-off-by: Josh Poimboeuf <[email protected]> Link: https://lore.kernel.org/r/feadbc3dfb3440d973580fad8d3db873cbfe1694.1633367242.git.jpoimboe@redhat.com Cc: Peter Zijlstra <[email protected]> Cc: [email protected] Cc: Miroslav Benes <[email protected]> Cc: [email protected]
2021-10-05perf tests attr: Add missing topdown metrics eventsKan Liang4-52/+440
The Topdown metrics events were added as 'perf stat' default events since commit 42641d6f4d15e6db ("perf stat: Add Topdown metrics events as default events"). However, the perf attr tests were not updated accordingly. The perf attr test fails on the platform which supports Topdown metrics. # perf test 17 17: Setup struct perf_event_attr :FAILED! Add Topdown metrics events into perf attr test cases. Make them optional since they are only available on newer platforms. Fixes: 42641d6f4d15e6db ("perf stat: Add Topdown metrics events as default events") Reported-by: kernel test robot <[email protected]> Signed-off-by: Kan Liang <[email protected]> Cc: Andi Kleen <[email protected]> Cc: Jiri Olsa <[email protected]> Link: http://lore.kernel.org/lkml/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2021-10-05tools include UAPI: Sync sound/asound.h copy with the kernel sourcesArnaldo Carvalho de Melo1-0/+1
Picking the changes from: 09d23174402da0f1 ("ALSA: rawmidi: introduce SNDRV_RAWMIDI_IOCTL_USER_PVERSION") Which entails no changes in the tooling side as it doesn't introduce new SNDRV_PCM_IOCTL_ ioctls. To silence this perf tools build warning: Warning: Kernel ABI header at 'tools/include/uapi/sound/asound.h' differs from latest version at 'include/uapi/sound/asound.h' diff -u tools/include/uapi/sound/asound.h include/uapi/sound/asound.h Cc: Jaroslav Kysela <[email protected]> Cc: Takashi Iwai <[email protected]> Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2021-10-05perf build: Fix plugin static linking with libopencsd on ARM and ARM64Branislav Rankov1-1/+1
Filter out -static flag when building plugins as they are always built as dynamic libraries and -static and -dynamic don't work well together on arm and arm64. Signed-off-by: Branislav Rankov <[email protected]> Acked-by: Jiri Olsa <[email protected]> Cc: Ingo Molnar <[email protected]> Cc: Mark Brown <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: [email protected] Cc: [email protected] Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Tamas Zsoldos <[email protected]> [ Split from a larger patch ] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2021-10-05perf build: Add missing -lstdc++ when linking with libopencsdBranislav Rankov1-1/+1
Add -lstdc++ to perf when linking libopencsd as it is a dependency. It does not hurt to add it when dynamic linking. Signed-off-by: Branislav Rankov <[email protected]> Acked-by: Jiri Olsa <[email protected]> Cc: Ingo Molnar <[email protected]> Cc: Mark Brown <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: [email protected] Cc: [email protected] Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Tamas Zsoldos <[email protected]> [ Split from a larger patch ] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2021-10-05perf jevents: Free the sys_event_tables list after processing entriesLike Xu1-0/+2
The compiler reports that free_sys_event_tables() is dead code. But according to the semantics, the "LIST_HEAD(sys_event_tables)" should also be released, just like we do with 'arch_std_events' in main(). Fixes: e9d32c1bf0cd7a98 ("perf vendor events: Add support for arch standard events") Signed-off-by: Like Xu <[email protected]> Reviewed-by: John Garry <[email protected]> Cc: Alexander Shishkin <[email protected]> Cc: Jiri Olsa <[email protected]> Cc: Mark Rutland <[email protected]> Cc: Namhyung Kim <[email protected]> Cc: Peter Zijlstra <[email protected]> Link: http://lore.kernel.org/lkml/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2021-10-05kselftests/sched: cleanup the child processesLi Zhijian1-10/+18
Previously, 'make -C sched run_tests' will block forever when it occurs something wrong where the *selftests framework* is waiting for its child processes to exit. [root@iaas-rpma sched]# ./cs_prctl_test ## Create a thread/process/process group hiearchy Not a core sched system tid=74985, / tgid=74985 / pgid=74985: ffffffffffffffff Not a core sched system tid=74986, / tgid=74986 / pgid=74985: ffffffffffffffff Not a core sched system tid=74988, / tgid=74986 / pgid=74985: ffffffffffffffff Not a core sched system tid=74989, / tgid=74986 / pgid=74985: ffffffffffffffff Not a core sched system tid=74990, / tgid=74986 / pgid=74985: ffffffffffffffff Not a core sched system tid=74987, / tgid=74987 / pgid=74985: ffffffffffffffff Not a core sched system tid=74991, / tgid=74987 / pgid=74985: ffffffffffffffff Not a core sched system tid=74992, / tgid=74987 / pgid=74985: ffffffffffffffff Not a core sched system tid=74993, / tgid=74987 / pgid=74985: ffffffffffffffff Not a core sched system (268) FAILED: get_cs_cookie(0) == 0 ## Set a cookie on entire process group -1 = prctl(62, 1, 0, 2, 0) core_sched create failed -- PGID: Invalid argument (cs_prctl_test.c:272) - [root@iaas-rpma sched]# ps PID TTY TIME CMD 4605 pts/2 00:00:00 bash 74986 pts/2 00:00:00 cs_prctl_test 74987 pts/2 00:00:00 cs_prctl_test 74999 pts/2 00:00:00 ps Reported-by: kernel test robot <[email protected]> Signed-off-by: Li Zhijian <[email protected]> Signed-off-by: Peter Zijlstra (Intel) <[email protected]> Reviewed-by: Chris Hyser <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2021-10-04Merge tag 'linux-kselftest-fixes-5.15-rc5' of ↵Linus Torvalds1-1/+4
git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest Pull Kselftest fixes from Shuah Khan: "A fix to implicit declaration warns in drivers/dma-buf test" * tag 'linux-kselftest-fixes-5.15-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest: selftests: drivers/dma-buf: Fix implicit declaration warns
2021-10-04perf srcline: Use long-running addr2line per DSOTony Garnock-Jones1-88/+250
Invoking addr2line in a separate subprocess, one for each required lookup, takes a terribly long time. This patch introduces a long-running addr2line process for each DSO, *DRAMATICALLY* speeding up runs of perf. What used to take tens of minutes now takes tens of seconds. Debian bug report about this issue: https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=911815 Signed-off-by: Tony Garnock-Jones <[email protected]> Tested-by: Ian Rogers <[email protected]> Cc: Ingo Molnar <[email protected]> Cc: Peter Zijlstra <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2021-10-04selftests: net: Test for the IOAM encapsulation with IPv6Justin Iurman1-50/+159
This patch adds support for testing the encap (ip6ip6) mode of IOAM. Signed-off-by: Justin Iurman <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2021-10-03objtool: print out the symbol type when complaining about itLinus Torvalds1-4/+8
The objtool warning that the kvm instruction emulation code triggered wasn't very useful: arch/x86/kvm/emulate.o: warning: objtool: __ex_table+0x4: don't know how to handle reloc symbol type: kvm_fastop_exception in that it helpfully tells you which symbol name it had trouble figuring out the relocation for, but it doesn't actually say what the unknown symbol type was that triggered it all. In this case it was because of missing type information (type 0, aka STT_NOTYPE), but on the whole it really should just have printed that out as part of the message. Because if this warning triggers, that's very much the first thing you want to know - why did reloc2sec_off() return failure for that symbol? So rather than just saying you can't handle some type of symbol without saying what the type _was_, just print out the type number too. Fixes: 24ff65257375 ("objtool: Teach get_alt_entry() about more relocation types") Link: https://lore.kernel.org/lkml/CAHk-=wiZwq-0LknKhXN4M+T8jbxn_2i9mcKpO+OaBSSq_Eh7tg@mail.gmail.com/ Signed-off-by: Linus Torvalds <[email protected]>
2021-10-03Merge tag 'objtool_urgent_for_v5.15_rc4' of ↵Linus Torvalds1-7/+25
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull objtool fix from Borislav Petkov: - Handle symbol relocations properly due to changes in the toolchains which remove section symbols now * tag 'objtool_urgent_for_v5.15_rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: objtool: Teach get_alt_entry() about more relocation types
2021-10-02selftests: net: mscc: ocelot: add a test for egress VLAN modificationVladimir Oltean1-0/+39
For this test we are exercising the VCAP ES0 block's ability to match on a packet with a given VLAN ID, and push an ES0 TAG A with a VID derived from VID_A_VAL plus the classified VLAN. $eth3.200 is the generator port $eth0 is the bridged DUT port that receives $eth1 is the bridged DUT port that forwards and rewrites VID 200 to 300 on egress via VCAP ES0 $eth2 is the port that receives from the DUT port $eth1 Since the egress rewriting happens outside the bridging service, VID 300 does not need to be in the bridge VLAN table of $eth1. Signed-off-by: Vladimir Oltean <[email protected]> Signed-off-by: David S. Miller <[email protected]>
Powered by cgit, Gruvboxed by Blaster4385.