| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Cross-merge networking fixes after downstream PR.
No conflicts.
Adjacent changes:
drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c
35d92abfbad8 ("net: hns3: fix kernel crash when devlink reload during initialization")
2a1a1a7b5fd7 ("net: hns3: add command queue trace for hns3")
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Paolo Abeni:
"Including fixes from bluetooth and IPsec.
The bridge patch is actually a follow-up to a recent fix in the same
area. We have a pending v6.8 AF_UNIX regression; it should be solved
soon, but not in time for this PR.
Current release - regressions:
- eth: ks8851: Queue RX packets in IRQ handler instead of disabling
BHs
- net: bridge: fix corrupted ethernet header on multicast-to-unicast
Current release - new code bugs:
- xfrm: fix possible bad pointer derferencing in error path
Previous releases - regressionis:
- core: fix out-of-bounds access in ops_init
- ipv6:
- fix potential uninit-value access in __ip6_make_skb()
- fib6_rules: avoid possible NULL dereference in fib6_rule_action()
- tcp: use refcount_inc_not_zero() in tcp_twsk_unique().
- rtnetlink: correct nested IFLA_VF_VLAN_LIST attribute validation
- rxrpc: fix congestion control algorithm
- bluetooth:
- l2cap: fix slab-use-after-free in l2cap_connect()
- msft: fix slab-use-after-free in msft_do_close()
- eth: hns3: fix kernel crash when devlink reload during
initialization
- eth: dsa: mv88e6xxx: add phylink_get_caps for the mv88e6320/21
family
Previous releases - always broken:
- xfrm: preserve vlan tags for transport mode software GRO
- tcp: defer shutdown(SEND_SHUTDOWN) for TCP_SYN_RECV sockets
- eth: hns3: keep using user config after hardware reset"
* tag 'net-6.9-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (47 commits)
net: dsa: mv88e6xxx: read cmode on mv88e6320/21 serdes only ports
net: dsa: mv88e6xxx: add phylink_get_caps for the mv88e6320/21 family
net: hns3: fix kernel crash when devlink reload during initialization
net: hns3: fix port vlan filter not disabled issue
net: hns3: use appropriate barrier function after setting a bit value
net: hns3: release PTP resources if pf initialization failed
net: hns3: change type of numa_node_mask as nodemask_t
net: hns3: direct return when receive a unknown mailbox message
net: hns3: using user configure after hardware reset
net/smc: fix neighbour and rtable leak in smc_ib_find_route()
ipv6: prevent NULL dereference in ip6_output()
hsr: Simplify code for announcing HSR nodes timer setup
ipv6: fib6_rules: avoid possible NULL dereference in fib6_rule_action()
dt-bindings: net: mediatek: remove wrongly added clocks and SerDes
rxrpc: Only transmit one ACK per jumbo packet received
rxrpc: Fix congestion control algorithm
selftests: test_bridge_neigh_suppress.sh: Fix failures due to duplicate MAC
ipv6: Fix potential uninit-value access in __ip6_make_skb()
net: phy: marvell-88q2xxx: add support for Rev B1 and B2
appletalk: Improve handling of broadcast packets
...
|
|
* for-next/selftests:
kselftest: arm64: Add a null pointer check
kselftest/arm64: Remove unused parameters in abi test
|
|
Add a selftest for netdev generic netlink. For now there is only a
single test that exercises the `queue-get` API.
The test works with netdevsim by default or with a real device by
setting NETIF.
Add a timeout param to cmd() since ethtool -L can take a long time on
real devices.
Signed-off-by: David Wei <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
Run tools/testing/selftest/net/csum.c as part of drv-net.
This binary covers multiple scenarios, based on arguments given,
for both IPv4 and IPv6:
- Accept UDP correct checksum
- Detect UDP invalid checksum
- Accept TCP correct checksum
- Detect TCP invalid checksum
- Transmit UDP: basic checksum offload
- Transmit UDP: zero checksum conversion
The test direction is reversed between receive and transmit tests, so
that the NIC under test is always the local machine.
In total this adds up to 12 testcases, with more to follow. For
conciseness, I replaced individual functions with a function factory.
Also detect hardware offload feature availability using Ethtool
netlink and skip tests when either feature is off. This need may be
common for offload feature tests and eventually deserving of a thin
wrapper in lib.py.
Missing are the PF_PACKET based send tests ('-P'). These use
virtio_net_hdr to program hardware checksum offload. Which requires
looking up the local MAC address and (harder) the MAC of the next hop.
I'll have to give it some though how to do that robustly and where
that code would belong.
Tested:
make -C tools/testing/selftests/ \
TARGETS="drivers/net drivers/net/hw" \
install INSTALL_PATH=/tmp/ksft
cd /tmp/ksft
sudo NETIF=ens4 REMOTE_TYPE=ssh \
REMOTE_ARGS="[email protected]" \
LOCAL_V4="10.40.0.1" \
REMOTE_V4="10.40.0.2" \
./run_kselftest.sh -t drivers/net/hw:csum.py
Signed-off-by: Willem de Bruijn <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
Add KHDR_INCLUDES to the CFLAGS to pull in the kselftest harness
dependencies (-D_GNU_SOURCE).
Also, remove redefinitions of _GNU_SOURCE in the source code.
Fixes: 809216233555 ("selftests/harness: remove use of LINE_MAX")
Reported-by: kernel test robot <[email protected]>
Closes: https://lore.kernel.org/oe-lkp/[email protected]
Signed-off-by: Edward Liaw <[email protected]>
Reviewed-by: Muhammad Usama Anjum <[email protected]>
Acked-by: Dave Hansen <[email protected]>
Reviewed-by: Jarkko Sakkinen <[email protected]>
Tested-by: Jarkko Sakkinen <[email protected]>
Reviewed-by: John Hubbard <[email protected]>
Signed-off-by: Shuah Khan <[email protected]>
|
|
Add the -D_GNU_SOURCE flag to KHDR_INCLUDES so that it is defined in a
central location.
Commit 809216233555 ("selftests/harness: remove use of LINE_MAX")
introduced asprintf into kselftest_harness.h, which is a GNU extension
and needs _GNU_SOURCE to either be defined prior to including headers or
with the -D_GNU_SOURCE flag passed to the compiler.
Fixed up commit log:
Shuah Khan <[email protected]>
Fixes: 809216233555 ("selftests/harness: remove use of LINE_MAX")
Reported-by: kernel test robot <[email protected]>
Closes: https://lore.kernel.org/oe-lkp/[email protected]
Signed-off-by: Edward Liaw <[email protected]>
Reviewed-by: Muhammad Usama Anjum <[email protected]>
Reviewed-by: Mark Brown <[email protected]>
Reviewed-by: John Hubbard <[email protected]>
Signed-off-by: Shuah Khan <[email protected]>
|
|
When building with clang, via:
make LLVM=1 -C tools/testing/selftests
...two types of warnings occur:
warning: absolute value function 'abs' given an argument of type
'long' but has parameter of type 'int' which may cause truncation of
value
warning: taking the absolute value of unsigned type 'unsigned long'
has no effect
Fix these by:
a) using labs() in place of abs(), when long integers are involved, and
b) Change to use signed integer data types, in places where subtraction
is used (and could end up with negative values).
c) Remove a duplicate abs() call in cmt_test.c.
Cc: Ilpo Järvinen <[email protected]>
Reviewed-by: Reinette Chatre <[email protected]>
Signed-off-by: John Hubbard <[email protected]>
Signed-off-by: Shuah Khan <[email protected]>
|
|
Fix the below checkbashisms errors. Because of these errors, these tests
will fail on dash shell.
possible bashism in test.d/kprobe/kretprobe_entry_arg.tc line 14 ('function' is useless):
function streq() {
possible bashism in test.d/dynevent/fprobe_entry_arg.tc line 14 ('function' is useless):
function streq() {
Fixes: f6e2253a617c ("selftests/ftrace: Add test cases for entry args at function exit")
Cc: [email protected]
Signed-off-by: Masami Hiramatsu (Google) <[email protected]>
Signed-off-by: Shuah Khan <[email protected]>
|
|
Since the dynevent/add_remove_btfarg.tc test case forgets to ensure that
fprobe is enabled for some structure field access tests which uses the
fprobe, it fails if CONFIG_FPROBE=n or CONFIG_FPROBE_EVENTS=n.
Fixes it to ensure the fprobe events are supported.
Fixes: d892d3d3d885 ("selftests/ftrace: Add BTF fields access testcases")
Cc: [email protected]
Signed-off-by: Masami Hiramatsu (Google) <[email protected]>
Signed-off-by: Shuah Khan <[email protected]>
|
|
Fix the following warnings by adding return check and error handling.
test_execve.c: In function ‘do_tests’:
test_execve.c:100:17: warning: ignoring return value of
‘capng_get_caps_process’
declared with attribute ‘warn_unused_result’ [-Wunused-result]
100 | capng_get_caps_process();
| ^~~~~~~~~~~~~~~~~~~~~~~~
validate_cap.c: In function ‘main’:
validate_cap.c:47:9: warning: ignoring return value of
‘capng_get_caps_process’
declared with attribute ‘warn_unused_result’ [-Wunused-result]
47 | capng_get_caps_process();
| ^~~~~~~~~~~~~~~~~~~~~~~~
Signed-off-by: Amer Al Shanawany <[email protected]>
Reviewed-by: Muhammad Usama Anjum <[email protected]>
Signed-off-by: Shuah Khan <[email protected]>
|
|
fix compiler warning and errors when compiling statmount test.
gcc 12.3 (Ubuntu 12.3.0-1ubuntu1~22.04)
statmount_test.c:572:24: warning: implicit declaration of function
‘offsetof’ [-Wimplicit-function-declaration]
572 | #define str_off(memb) (offsetof(struct statmount, memb) /
sizeof(uint32_t))
| ^~~~~~~~
statmount_test.c:598:51: note: in expansion of macro ‘str_off’
598 | test_statmount_string(STATMOUNT_MNT_ROOT,
str_off(mnt_root), "mount root");
|
^~~~~~~
statmount_test.c:18:1: note: ‘offsetof’ is defined in header
‘<stddef.h>’; did you forget to ‘#include <stddef.h>’?
17 | #include "../../kselftest.h"
+++ |+#include <stddef.h>
Signed-off-by: Amer Al Shanawany <[email protected]>
Reviewed-by: Muhammad Usama Anjum <[email protected]>
Signed-off-by: Shuah Khan <[email protected]>
|
|
In the function l5_test(), variable $tests is empty when there is no .mk
file in the subsystem to be tested. It causes the following grep operation
get stuck.
This fix check the variable $tests, return when it is empty.
Signed-off-by: Lu Dai <[email protected]>
Signed-off-by: Shuah Khan <[email protected]>
|
|
[Changes from V1:
- Use a default branch in the switch statement to initialize `val'.]
GCC warns that `val' may be used uninitialized in the
BPF_CRE_READ_BITFIELD macro, defined in bpf_core_read.h as:
[...]
unsigned long long val; \
[...] \
switch (__CORE_RELO(s, field, BYTE_SIZE)) { \
case 1: val = *(const unsigned char *)p; break; \
case 2: val = *(const unsigned short *)p; break; \
case 4: val = *(const unsigned int *)p; break; \
case 8: val = *(const unsigned long long *)p; break; \
} \
[...]
val; \
} \
This patch adds a default entry in the switch statement that sets
`val' to zero in order to avoid the warning, and random values to be
used in case __builtin_preserve_field_info returns unexpected values
for BPF_FIELD_BYTE_SIZE.
Tested in bpf-next master.
No regressions.
Signed-off-by: Jose E. Marchesi <[email protected]>
Signed-off-by: Andrii Nakryiko <[email protected]>
Link: https://lore.kernel.org/bpf/[email protected]
|
|
We need the char-misc changes in here as well.
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
This little patch is a follow-up to:
https://lore.kernel.org/bpf/[email protected]/T/#u
The temporary workaround of passing -DBPF_NO_PRESERVE_ACCESS_INDEX
when building with GCC triggers a redefinition preprocessor error when
building progs/skb_pkt_end.c. This patch adds a guard to avoid
redefinition.
Signed-off-by: Jose E. Marchesi <[email protected]>
Cc: [email protected]
Cc: [email protected]
Cc: Eduard Zingerman <[email protected]>
Cc: Yonghong Song <[email protected]>
Cc: Andrii Nakryiko <[email protected]>
Acked-by: Yonghong Song <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Alexei Starovoitov <[email protected]>
|
|
[Changes from V2:
- no-strict-aliasing is only applied when building with GCC.
- cpumask_failure.c is excluded, as it doesn't use __imm_insn.]
The __imm_insn macro is defined in bpf_misc.h as:
#define __imm_insn(name, expr) [name]"i"(*(long *)&(expr))
This may lead to type-punning and strict aliasing rules violations in
it's typical usage where the address of a struct bpf_insn is passed as
expr, like in:
__imm_insn(st_mem,
BPF_ST_MEM(BPF_W, BPF_REG_1, offsetof(struct __sk_buff, mark), 42))
Where:
#define BPF_ST_MEM(SIZE, DST, OFF, IMM) \
((struct bpf_insn) { \
.code = BPF_ST | BPF_SIZE(SIZE) | BPF_MEM, \
.dst_reg = DST, \
.src_reg = 0, \
.off = OFF, \
.imm = IMM })
In all the actual instances of this in the BPF selftests the value is
fed to a volatile asm statement as soon as it gets read from memory,
and thus it is unlikely anti-aliasing rules breakage may lead to
misguided optimizations.
However, GCC detects the potential problem (indirectly) by issuing a
warning stating that a temporary <Uxxxxxx> is used uninitialized,
where the temporary corresponds to the memory read by *(long *).
This patch adds -fno-strict-aliasing to the compilation flags of the
particular selftests that do type punning via __imm_insn, only for
GCC.
Tested in master bpf-next.
No regressions.
Signed-off-by: Jose E. Marchesi <[email protected]>
Cc: [email protected]
Cc: [email protected]
Cc: Yonghong Song <[email protected]>
Cc: Eduard Zingerman <[email protected]>
Acked-by: Yonghong Song <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Alexei Starovoitov <[email protected]>
|
|
[Changes from V1:
- The warning to disable is -Wmaybe-uninitialized, not -Wuninitialized.
- This warning is only supported in GCC.]
The BPF selftest verifier_global_subprogs.c contains code that
purposedly performs out of bounds access to memory, to check whether
the kernel verifier is able to catch them. For example:
__noinline int global_unsupp(const int *mem)
{
if (!mem)
return 0;
return mem[100]; /* BOOM */
}
With -O1 and higher and no inlining, GCC notices this fact and emits a
"maybe uninitialized" warning. This is by design. Note that the
emission of these warnings is highly dependent on the precise
optimizations that are performed.
This patch adds a compiler pragma to verifier_global_subprogs.c to
ignore these warnings.
Tested in bpf-next master.
No regressions.
Signed-off-by: Jose E. Marchesi <[email protected]>
Cc: [email protected]
Cc: [email protected]
Cc: Yonghong Song <[email protected]>
Cc: Eduard Zingerman <[email protected]>
Acked-by: Yonghong Song <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Alexei Starovoitov <[email protected]>
|
|
Pull HD-audio CONFIG_PM cleanup.
Signed-off-by: Takashi Iwai <[email protected]>
|
|
dump_config_tree() is declared to return an int, but the compiler cannot
prove that it always returns any value at all. This leads to a clang
warning, when building via:
make LLVM=1 -C tools/testing/selftests
Suggested-by: John Hubbard <[email protected]>
Cc: Mark Brown <[email protected]>
Signed-off-by: Jaroslav Kysela <[email protected]>
Reviewed-by: Mark Brown <[email protected]>
Signed-off-by: Takashi Iwai <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
|
|
The tools/lib/rbtree.c code came from the kernel. Remove the
EXPORT_SYMBOL() that make sense only there. Unfortunately it is not being
checked with tools/perf/check_headers.sh. Will try to remedy this. Until
then pick the improvements from:
b0687c1119b4e8c8 ("lib/rbtree: use '+' instead of '|' for setting color.")
That I noticed by doing:
diff -u tools/lib/rbtree.c lib/rbtree.c
diff -u tools/include/linux/rbtree_augmented.h include/linux/rbtree_augmented.h
There is one other cases, but lets pick it in separate patches.
Link: https://lkml.kernel.org/r/ZigZzeFoukzRKG1Q@x1
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
Cc: Adrian Hunter <[email protected]>
Cc: Ian Rogers <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Kan Liang <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Noah Goldstein <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
|
|
When LSE atomics are available, BPF atomic instructions are implemented
as single ARM64 atomic instructions, therefore it is easy to enable
these in bpf_arena using the currently available exception handling
setup.
LL_SC atomics use loops and therefore would need more work to enable in
bpf_arena.
Enable LSE atomics based instructions in bpf_arena and use the
bpf_jit_supports_insn() callback to reject atomics in bpf_arena if LSE
atomics are not available.
All atomics and arena_atomics selftests are passing:
[root@ip-172-31-2-216 bpf]# ./test_progs -a atomics,arena_atomics
#3/1 arena_atomics/add:OK
#3/2 arena_atomics/sub:OK
#3/3 arena_atomics/and:OK
#3/4 arena_atomics/or:OK
#3/5 arena_atomics/xor:OK
#3/6 arena_atomics/cmpxchg:OK
#3/7 arena_atomics/xchg:OK
#3 arena_atomics:OK
#10/1 atomics/add:OK
#10/2 atomics/sub:OK
#10/3 atomics/and:OK
#10/4 atomics/or:OK
#10/5 atomics/xor:OK
#10/6 atomics/cmpxchg:OK
#10/7 atomics/xchg:OK
#10 atomics:OK
Summary: 2/14 PASSED, 0 SKIPPED, 0 FAILED
Signed-off-by: Puranjay Mohan <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Alexei Starovoitov <[email protected]>
|
|
When creating the topology for the test, three veth pairs are created in
the initial network namespace before being moved to one of the network
namespaces created by the test.
On systems where systemd-udev uses MACAddressPolicy=persistent (default
since systemd version 242), this will result in some net devices having
the same MAC address since they were created with the same name in the
initial network namespace. In turn, this leads to arping / ndisc6
failing since packets are dropped by the bridge's loopback filter.
Fix by creating each net device in the correct network namespace instead
of moving it there from the initial network namespace.
Reported-by: Jakub Kicinski <[email protected]>
Closes: https://lore.kernel.org/netdev/[email protected]/
Fixes: 7648ac72dcd7 ("selftests: net: Add bridge neighbor suppression test")
Signed-off-by: Ido Schimmel <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
There is a spelling mistake in the help message. Fix it.
Signed-off-by: Colin Ian King <[email protected]>
Signed-off-by: Michael Ellerman <[email protected]>
Link: https://msgid.link/[email protected]
|
|
Without this change the created netns instances are not cleared after
this script execution. To fix this problem the cleanup_all_ns function
from ../lib.sh is called.
Signed-off-by: Lukasz Majewski <[email protected]>
Reviewed-by: Simon Horman <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
Add tests covering following functionality on KSZ9477 switch family:
- default port priority
- global DSCP to Internal Priority Mapping
- apptrust configuration
This script was tested on KSZ9893R
Signed-off-by: Oleksij Rempel <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
It's confusing both pointers and arrays are printed as *. Let's print
array types with [] so that we can identify them easily. Although it's
interchangable, sometimes it can cause confusion with size like in the
below example.
Note that it is not the same with C syntax where it goes to the variable
names, but we want to have it in the type names (like in Go language).
Before:
mov [20] 0x68(reg5) -> reg0 type='struct page**' size=0x80 (die:0x4e61d32)
After:
mov [20] 0x68(reg5) -> reg0 type='struct page*[]' size=0x80 (die:0x4e61d32)
Signed-off-by: Namhyung Kim <[email protected]>
Acked-by: Masami Hiramatsu <[email protected]>
Cc: Adrian Hunter <[email protected]>
Cc: Ian Rogers <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Kan Liang <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
When building with clang, via:
make LLVM=1 -C tools/testing/selftest
...clang warns about three variables that are not initialized in all
cases:
1) The opt_ipproto_off variable is used uninitialized if "testname" is
not "ip". Willem de Bruijn pointed out that this is an actual bug, and
suggested the fix that I'm using here (thanks!).
2) The addr_len is used uninitialized, but only in the assert case,
which bails out, so this is harmless.
3) The family variable in add_listener() is only used uninitialized in
the error case (neither IPv4 nor IPv6 is specified), so it's also
harmless.
Fix by initializing each variable.
Signed-off-by: John Hubbard <[email protected]>
Reviewed-by: Willem de Bruijn <[email protected]>
Acked-by: Mat Martineau <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
connection attempt
Netdev CI reports occasional failures with this test
("ERROR: ns2-dX6bUE did not pick up tcp connection from peer").
Add explicit busywait call until the initial connection attempt shows
up in conntrack rather than a one-shot 'must exist' check.
Signed-off-by: Florian Westphal <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
Drive-by clean up, we shouldn't use meaningless "test_" prefix for
subtest names.
Signed-off-by: Andrii Nakryiko <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Martin KaFai Lau <[email protected]>
|
|
Add a simple test that validates that libbpf will reject isolated
struct_ops program early with helpful warning message.
Also validate that explicit use of such BPF program through BPF skeleton
after BPF object is open won't trigger any warnings.
Signed-off-by: Andrii Nakryiko <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Martin KaFai Lau <[email protected]>
|
|
Extend libbpf's pre-load checks for BPF programs, detecting more typical
conditions that are destinated to cause BPF program failure. This is an
opportunity to provide more helpful and actionable error message to
users, instead of potentially very confusing BPF verifier log and/or
error.
In this case, we detect struct_ops BPF program that was not referenced
anywhere, but still attempted to be loaded (according to libbpf logic).
Suggest that the program might need to be used in some struct_ops
variable. User will get a message of the following kind:
libbpf: prog 'test_1_forgotten': SEC("struct_ops") program isn't referenced anywhere, did you forget to use it?
Suggested-by: Tejun Heo <[email protected]>
Signed-off-by: Andrii Nakryiko <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Martin KaFai Lau <[email protected]>
|
|
strerror_r(), used from libbpf-specific libbpf_strerror_r() wrapper is
documented to return error in two different ways, depending on glibc
version. Take that into account when handling strerror_r()'s own errors,
which happens when we pass some non-standard (internal) kernel error to
it. Before this patch we'd have "ERROR: strerror_r(524)=22", which is
quite confusing. Now for the same situation we'll see a bit less
visually scary "unknown error (-524)".
At least we won't confuse user with irrelevant EINVAL (22).
Signed-off-by: Andrii Nakryiko <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Martin KaFai Lau <[email protected]>
|
|
Add a test which tests the case that was just fixed. Kernel has full
type information about callback, but user explicitly nulls out the
reference to declaratively set BPF program reference.
Signed-off-by: Andrii Nakryiko <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Martin KaFai Lau <[email protected]>
|
|
There is yet another corner case where user can set STRUCT_OPS program
reference in STRUCT_OPS map to NULL, but libbpf will fail to disable
autoload for such BPF program. This time it's the case of "new" kernel
which has type information about callback field, but user explicitly
nulled-out program reference from user-space after opening BPF object.
Fix, hopefully, the last remaining unhandled case.
Fixes: 0737df6de946 ("libbpf: better fix for handling nulled-out struct_ops program")
Fixes: f973fccd43d3 ("libbpf: handle nulled-out program in struct_ops correctly")
Signed-off-by: Andrii Nakryiko <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Martin KaFai Lau <[email protected]>
|
|
libbpf ensures that BPF program references set in map->st_ops->progs[i]
during open phase are always valid STRUCT_OPS programs. This is done in
bpf_object__collect_st_ops_relos(). So there is no need to double-check
that in bpf_map__init_kern_struct_ops().
Simplify the code by removing unnecessary check. Also, we avoid using
local prog variable to keep code similar to the upcoming fix, which adds
similar logic in another part of bpf_map__init_kern_struct_ops().
Signed-off-by: Andrii Nakryiko <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Martin KaFai Lau <[email protected]>
|
|
The test_xdp_noinline.c contains 2 functions that use more then 5
arguments. This patch collapses the 2 last arguments in an array.
Also in GCC and ipa_sra optimization increases the number of arguments
used in function encap_v4. This pass disables the optimization for that
particular file.
Signed-off-by: Cupertino Miranda <[email protected]>
Signed-off-by: Andrii Nakryiko <[email protected]>
Acked-by: Yonghong Song <[email protected]>
Link: https://lore.kernel.org/bpf/[email protected]
|
|
This patch adds support to specify CFLAGS per source file and per test
runner.
Signed-off-by: Cupertino Miranda <[email protected]>
Signed-off-by: Andrii Nakryiko <[email protected]>
Acked-by: Yonghong Song <[email protected]>
Link: https://lore.kernel.org/bpf/[email protected]
|
|
The vmlinux.h file generated by bpftool makes use of compiler pragmas
in order to install the CO-RE preserve_access_index in all the struct
types derived from the BTF info:
#ifndef __VMLINUX_H__
#define __VMLINUX_H__
#ifndef BPF_NO_PRESERVE_ACCESS_INDEX
#pragma clang attribute push (__attribute__((preserve_access_index)), apply_t = record
#endif
[... type definitions generated from kernel BTF ... ]
#ifndef BPF_NO_PRESERVE_ACCESS_INDEX
#pragma clang attribute pop
#endif
The `clang attribute push/pop' pragmas are specific to clang/llvm and
are not supported by GCC.
At the moment the BTF dumping services in libbpf do not support
dicriminating between types dumped because they are directly referred
and types dumped because they are dependencies. A suitable API is
being worked now. See [1] and [2].
In the interim, this patch changes the selftests/bpf Makefile so it
passes -DBPF_NO_PRESERVE_ACCESS_INDEX to GCC when it builds the
selftests. This workaround is temporary, and may have an impact on
the results of the GCC-built tests.
[1] https://lore.kernel.org/bpf/[email protected]/T/#u
[2] https://lore.kernel.org/bpf/[email protected]/T/#u
Tested in bpf-next master.
No regressions.
Signed-off-by: Jose E. Marchesi <[email protected]>
Signed-off-by: Andrii Nakryiko <[email protected]>
Link: https://lore.kernel.org/bpf/[email protected]
|
|
This patch modifies selftests/bpf/Makefile to pass -Wno-attributes to
GCC. This is because of the following attributes which are ignored:
- btf_decl_tag
- btf_type_tag
There are many of these. At the moment none of these are
recognized/handled by gcc-bpf.
We are aware that btf_decl_tag is necessary for some of the
selftest harness to communicate test failure/success. Support for
it is in progress in GCC upstream:
https://gcc.gnu.org/pipermail/gcc-patches/2024-May/650482.html
However, the GCC master branch is not yet open, so the series
above (currently under review upstream) wont be able to make it
there until 14.1 gets released, probably mid next week.
As for btf_type_tag, more extensive work will be needed in GCC
upstream to support it in both BTF and DWARF. We have a WIP big
patch for that, but that is not needed to compile/build the
selftests.
- used
There are SEC macros defined in the selftests as:
#define SEC(N) __attribute__((section(N),used))
The SEC macro is used for both functions and global variables.
According to the GCC documentation `used' attribute is really only
meaningful for functions, and it warns when the attribute is used
for other global objects, like for example ctl_array in
test_xdp_noinline.c.
Ignoring this is benign.
- align_value
In progs/test_cls_redirect.c:127 there is:
typedef uint8_t *net_ptr __attribute__((align_value(8)));
GCC warns that it is ignoring this attribute, because it is not
implemented by GCC.
I think ignoring this attribute in GCC is benign, because according
to the clang documentation [1] its purpose seems to be merely
declarative and doesn't seem to translate into extra checks at
run-time, only to perhaps better optimized code ("runtime behavior
is undefined if the pointed memory object is not aligned to the
specified alignment").
[1] https://clang.llvm.org/docs/AttributeReference.html#align-value
Tested in bpf-next master.
Signed-off-by: Jose E. Marchesi <[email protected]>
Signed-off-by: Andrii Nakryiko <[email protected]>
Acked-by: Yonghong Song <[email protected]>
Link: https://lore.kernel.org/bpf/[email protected]
|
|
An object defined as `static' defaults to hidden visibility. If
additionally the visibility(__weak__) compiler attribute is applied to
the declaration of the object, GCC warns that the attribute gets
ignored.
This patch removes the only instance of this problem among the BPF
selftests.
Tested in bpf-next master.
Signed-off-by: Jose E. Marchesi <[email protected]>
Signed-off-by: Andrii Nakryiko <[email protected]>
Acked-by: Yonghong Song <[email protected]>
Link: https://lore.kernel.org/bpf/[email protected]
|
|
'struct mem_info' is reference counted while 'struct branch_info' and
he_cache (struct hist_entry **) are not.
Break apart the priv field in 'struct hist_entry_iter' so that we can
know which values are owned by the iter and do the appropriate free or
put.
Move hide_unresolved to marginally shrink the size of the now grown
struct.
Signed-off-by: Ian Rogers <[email protected]>
Cc: Adrian Hunter <[email protected]>
Cc: Alexander Shishkin <[email protected]>
Cc: Andi Kleen <[email protected]>
Cc: Athira Rajeev <[email protected]>
Cc: Ben Gainey <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: James Clark <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: K Prateek Nayak <[email protected]>
Cc: Kajol Jain <[email protected]>
Cc: Kan Liang <[email protected]>
Cc: Li Dong <[email protected]>
Cc: Mark Rutland <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Oliver Upton <[email protected]>
Cc: Paran Lee <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Ravi Bangoria <[email protected]>
Cc: Sun Haiyong <[email protected]>
Cc: Tim Chen <[email protected]>
Cc: Yanteng Si <[email protected]>
Cc: Yicong Yang <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
Add reference count checking and switch 'struct mem_info' usage to use
accessor functions.
Signed-off-by: Ian Rogers <[email protected]>
Cc: Adrian Hunter <[email protected]>
Cc: Alexander Shishkin <[email protected]>
Cc: Andi Kleen <[email protected]>
Cc: Athira Rajeev <[email protected]>
Cc: Ben Gainey <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: James Clark <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: K Prateek Nayak <[email protected]>
Cc: Kajol Jain <[email protected]>
Cc: Kan Liang <[email protected]>
Cc: Li Dong <[email protected]>
Cc: Mark Rutland <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Oliver Upton <[email protected]>
Cc: Paran Lee <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Ravi Bangoria <[email protected]>
Cc: Sun Haiyong <[email protected]>
Cc: Tim Chen <[email protected]>
Cc: Yanteng Si <[email protected]>
Cc: Yicong Yang <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
Move mem-info to its own header rather than having it split between
mem-events and symbol.
Signed-off-by: Ian Rogers <[email protected]>
Cc: Adrian Hunter <[email protected]>
Cc: Alexander Shishkin <[email protected]>
Cc: Andi Kleen <[email protected]>
Cc: Athira Rajeev <[email protected]>
Cc: Ben Gainey <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: James Clark <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: K Prateek Nayak <[email protected]>
Cc: Kajol Jain <[email protected]>
Cc: Kan Liang <[email protected]>
Cc: Li Dong <[email protected]>
Cc: Mark Rutland <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Oliver Upton <[email protected]>
Cc: Paran Lee <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Ravi Bangoria <[email protected]>
Cc: Sun Haiyong <[email protected]>
Cc: Tim Chen <[email protected]>
Cc: Yanteng Si <[email protected]>
Cc: Yicong Yang <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
Reference count checking of an rbtree is troublesome as each pointer
should have a reference, switch to using a sorted array.
Remove an indirection by embedding the reference count with the string.
Use pthread_once to safely initialize the comm_strs and reader writer
mutex.
Signed-off-by: Ian Rogers <[email protected]>
Cc: Adrian Hunter <[email protected]>
Cc: Alexander Shishkin <[email protected]>
Cc: Andi Kleen <[email protected]>
Cc: Athira Rajeev <[email protected]>
Cc: Ben Gainey <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: James Clark <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: K Prateek Nayak <[email protected]>
Cc: Kajol Jain <[email protected]>
Cc: Kan Liang <[email protected]>
Cc: Li Dong <[email protected]>
Cc: Mark Rutland <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Oliver Upton <[email protected]>
Cc: Paran Lee <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Ravi Bangoria <[email protected]>
Cc: Sun Haiyong <[email protected]>
Cc: Tim Chen <[email protected]>
Cc: Yanteng Si <[email protected]>
Cc: Yicong Yang <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
It is assigned a value of 1 and never incremented. Remove and replace
puts with delete.
Signed-off-by: Ian Rogers <[email protected]>
Cc: Adrian Hunter <[email protected]>
Cc: Alexander Shishkin <[email protected]>
Cc: Andi Kleen <[email protected]>
Cc: Athira Rajeev <[email protected]>
Cc: Ben Gainey <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: James Clark <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: K Prateek Nayak <[email protected]>
Cc: Kajol Jain <[email protected]>
Cc: Kan Liang <[email protected]>
Cc: Li Dong <[email protected]>
Cc: Mark Rutland <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Oliver Upton <[email protected]>
Cc: Paran Lee <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Ravi Bangoria <[email protected]>
Cc: Sun Haiyong <[email protected]>
Cc: Tim Chen <[email protected]>
Cc: Yanteng Si <[email protected]>
Cc: Yicong Yang <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
block_info__get() has no callers so the refcount is only ever one. As
such remove the reference counting logic and turn puts to deletes.
Signed-off-by: Ian Rogers <[email protected]>
Cc: Adrian Hunter <[email protected]>
Cc: Alexander Shishkin <[email protected]>
Cc: Andi Kleen <[email protected]>
Cc: Athira Rajeev <[email protected]>
Cc: Ben Gainey <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: James Clark <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: K Prateek Nayak <[email protected]>
Cc: Kajol Jain <[email protected]>
Cc: Kan Liang <[email protected]>
Cc: Li Dong <[email protected]>
Cc: Mark Rutland <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Oliver Upton <[email protected]>
Cc: Paran Lee <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Ravi Bangoria <[email protected]>
Cc: Sun Haiyong <[email protected]>
Cc: Tim Chen <[email protected]>
Cc: Yanteng Si <[email protected]>
Cc: Yicong Yang <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
Freeing hash map doesn't free the entries added to the hashmap, add
the missing free().
Fixes: d3e7cad6f36d9e80 ("perf annotate: Add a hashmap for symbol histogram")
Signed-off-by: Ian Rogers <[email protected]>
Cc: Adrian Hunter <[email protected]>
Cc: Alexander Shishkin <[email protected]>
Cc: Andi Kleen <[email protected]>
Cc: Athira Rajeev <[email protected]>
Cc: Ben Gainey <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: James Clark <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Kajol Jain <[email protected]>
Cc: Kan Liang <[email protected]>
Cc: K Prateek Nayak <[email protected]>
Cc: Li Dong <[email protected]>
Cc: Mark Rutland <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Oliver Upton <[email protected]>
Cc: Paran Lee <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Ravi Bangoria <[email protected]>
Cc: Sun Haiyong <[email protected]>
Cc: Tim Chen <[email protected]>
Cc: Yanteng Si <[email protected]>
Cc: Yicong Yang <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
ui_browser__show() is capturing the input title that is stack allocated
memory in hist_browser__run().
Avoid a use after return by strdup-ing the string.
Committer notes:
Further explanation from Ian Rogers:
My command line using tui is:
$ sudo bash -c 'rm /tmp/asan.log*; export
ASAN_OPTIONS="log_path=/tmp/asan.log"; /tmp/perf/perf mem record -a
sleep 1; /tmp/perf/perf mem report'
I then go to the perf annotate view and quit. This triggers the asan
error (from the log file):
```
==1254591==ERROR: AddressSanitizer: stack-use-after-return on address
0x7f2813331920 at pc 0x7f28180
65991 bp 0x7fff0a21c750 sp 0x7fff0a21bf10
READ of size 80 at 0x7f2813331920 thread T0
#0 0x7f2818065990 in __interceptor_strlen
../../../../src/libsanitizer/sanitizer_common/sanitizer_common_interceptors.inc:461
#1 0x7f2817698251 in SLsmg_write_wrapped_string
(/lib/x86_64-linux-gnu/libslang.so.2+0x98251)
#2 0x7f28176984b9 in SLsmg_write_nstring
(/lib/x86_64-linux-gnu/libslang.so.2+0x984b9)
#3 0x55c94045b365 in ui_browser__write_nstring ui/browser.c:60
#4 0x55c94045c558 in __ui_browser__show_title ui/browser.c:266
#5 0x55c94045c776 in ui_browser__show ui/browser.c:288
#6 0x55c94045c06d in ui_browser__handle_resize ui/browser.c:206
#7 0x55c94047979b in do_annotate ui/browsers/hists.c:2458
#8 0x55c94047fb17 in evsel__hists_browse ui/browsers/hists.c:3412
#9 0x55c940480a0c in perf_evsel_menu__run ui/browsers/hists.c:3527
#10 0x55c940481108 in __evlist__tui_browse_hists ui/browsers/hists.c:3613
#11 0x55c9404813f7 in evlist__tui_browse_hists ui/browsers/hists.c:3661
#12 0x55c93ffa253f in report__browse_hists tools/perf/builtin-report.c:671
#13 0x55c93ffa58ca in __cmd_report tools/perf/builtin-report.c:1141
#14 0x55c93ffaf159 in cmd_report tools/perf/builtin-report.c:1805
#15 0x55c94000c05c in report_events tools/perf/builtin-mem.c:374
#16 0x55c94000d96d in cmd_mem tools/perf/builtin-mem.c:516
#17 0x55c9400e44ee in run_builtin tools/perf/perf.c:350
#18 0x55c9400e4a5a in handle_internal_command tools/perf/perf.c:403
#19 0x55c9400e4e22 in run_argv tools/perf/perf.c:447
#20 0x55c9400e53ad in main tools/perf/perf.c:561
#21 0x7f28170456c9 in __libc_start_call_main
../sysdeps/nptl/libc_start_call_main.h:58
#22 0x7f2817045784 in __libc_start_main_impl ../csu/libc-start.c:360
#23 0x55c93ff544c0 in _start (/tmp/perf/perf+0x19a4c0) (BuildId:
84899b0e8c7d3a3eaa67b2eb35e3d8b2f8cd4c93)
Address 0x7f2813331920 is located in stack of thread T0 at offset 32 in frame
#0 0x55c94046e85e in hist_browser__run ui/browsers/hists.c:746
This frame has 1 object(s):
[32, 192) 'title' (line 747) <== Memory access at offset 32 is
inside this variable
HINT: this may be a false positive if your program uses some custom
stack unwind mechanism, swapcontext or vfork
```
hist_browser__run isn't on the stack so the asan error looks legit.
There's no clean init/exit on struct ui_browser so I may be trading a
use-after-return for a memory leak, but that seems look a good trade
anyway.
Fixes: 05e8b0804ec4 ("perf ui browser: Stop using 'self'")
Signed-off-by: Ian Rogers <[email protected]>
Cc: Adrian Hunter <[email protected]>
Cc: Alexander Shishkin <[email protected]>
Cc: Andi Kleen <[email protected]>
Cc: Athira Rajeev <[email protected]>
Cc: Ben Gainey <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: James Clark <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Kajol Jain <[email protected]>
Cc: Kan Liang <[email protected]>
Cc: K Prateek Nayak <[email protected]>
Cc: Li Dong <[email protected]>
Cc: Mark Rutland <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Oliver Upton <[email protected]>
Cc: Paran Lee <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Ravi Bangoria <[email protected]>
Cc: Sun Haiyong <[email protected]>
Cc: Tim Chen <[email protected]>
Cc: Yanteng Si <[email protected]>
Cc: Yicong Yang <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
In our FOLL_LONGTERM tests, we prefault the page tables for the GUP-fast
test cases to be able to find a PTE and exercise the "longterm pinning
allowed" logic on the GUP-fast path where possible.
For now, we always prefault the page tables writable, resulting in PTEs
that are writable.
Let's cover more cases to also test if our unsharing logic works as
expected (and is able to make progress when there is nothing to unshare)
by mprotect'ing the range R/O when R/O-pinning, so we don't get PTEs that
are writable.
This change would have found an issue introduced by commit a12083d721d7
("mm/gup: handle hugepd for follow_page()"), whereby R/O pinning was not
able to make progress in all cases, because unsharing logic was not
provided with the VMA to decide at some point that long-term R/O pinning a
!anon page is fine.
Link: https://lkml.kernel.org/r/[email protected]
Signed-off-by: David Hildenbrand <[email protected]>
Acked-by: Peter Xu <[email protected]>
Cc: Shuah Khan <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
|