| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
This patch adds several local variables:
"cl_output": pointer for outputting single cache line metrics;
"output_str": pointer for outputting cache line metrics;
"sort_str": pointer to the sorting metrics.
This can improve readability for the code and it's more flexible when
later extend to different strings for the output metrics.
Signed-off-by: Leo Yan <[email protected]>
Acked-by: Jiri Olsa <[email protected]>
Acked-by: Namhyung Kim <[email protected]>
Cc: Alexander Shishkin <[email protected]>
Cc: Arnaldo Carvalho de Melo <[email protected]>
Cc: David Ahern <[email protected]>
Cc: Don Zickus <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: Joe Mario <[email protected]>
Cc: Joe Perches <[email protected]>
Cc: Mark Rutland <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
The macro DISPLAY_HITM() is used to calculate HITM percentage introduced
by every node and it's shown for the node info.
This patch introduces the static function display_metrics() to replace
the macro, and the parameters are refined for passing the metric's
statistic and sum value.
Signed-off-by: Leo Yan <[email protected]>
Acked-by: Namhyung Kim <[email protected]>
Acked-by: Jiri Olsa <[email protected]>
Cc: Alexander Shishkin <[email protected]>
Cc: Arnaldo Carvalho de Melo <[email protected]>
Cc: David Ahern <[email protected]>
Cc: Don Zickus <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: Joe Mario <[email protected]>
Cc: Joe Perches <[email protected]>
Cc: Mark Rutland <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
For percent() its arguments are defined as integers; this is not
consistent with its consumers which pass u32 arguments.
Thus this patch makes argument type as u32 for percent().
Signed-off-by: Leo Yan <[email protected]>
Acked-by: Namhyung Kim <[email protected]>
Acked-by: Jiri Olsa <[email protected]>
Cc: Alexander Shishkin <[email protected]>
Cc: Arnaldo Carvalho de Melo <[email protected]>
Cc: David Ahern <[email protected]>
Cc: Don Zickus <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: Joe Mario <[email protected]>
Cc: Joe Perches <[email protected]>
Cc: Mark Rutland <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
When sorting on the respective metrics (lcl_hitm, rmt_hitm, tot_hitm),
the FILTER_HITM macro is used to filter out the cache line entries if
its overhead is less than 1%.
This patch introduces a static function filter_display() to replace that
macro and refines its parameters with a more flexible way, rather than
passing field name, it changes to pass the cache line's statistic and
sum value.
Signed-off-by: Leo Yan <[email protected]>
Acked-by: Namhyung Kim <[email protected]>
Acked-by: Jiri Olsa <[email protected]>
Cc: Alexander Shishkin <[email protected]>
Cc: Arnaldo Carvalho de Melo <[email protected]>
Cc: David Ahern <[email protected]>
Cc: Don Zickus <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: Joe Mario <[email protected]>
Cc: Joe Perches <[email protected]>
Cc: Mark Rutland <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
This patch has no functionality changes but refactors hist entry
validation for cache line resorting.
It renames function "valid_hitm_or_store()" to "is_valid_hist_entry()",
changes return type from integer type to bool type. In the function,
it uses switch-case instead of ternary operators, which is easier
to extend for more display types.
Signed-off-by: Leo Yan <[email protected]>
Acked-by: Jiri Olsa <[email protected]>
Acked-by: Namhyung Kim <[email protected]>
Cc: Alexander Shishkin <[email protected]>
Cc: David Ahern <[email protected]>
Cc: Don Zickus <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: Joe Mario <[email protected]>
Cc: Joe Perches <[email protected]>
Cc: Mark Rutland <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
For shared cache line statistics, 'perf c2c' relies on HITM. We can use
more general naming rather than only binding to HITM, so replace
"hitm_stats" with "shared_clines_stats" in structure perf_c2c, and
rename function resort_hitm_cb() to resort_shared_cl_cb().
Signed-off-by: Leo Yan <[email protected]>
Acked-by: Jiri Olsa <[email protected]>
Acked-by: Namhyung Kim <[email protected]>
Cc: Alexander Shishkin <[email protected]>
Cc: David Ahern <[email protected]>
Cc: Don Zickus <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: Joe Mario <[email protected]>
Cc: Joe Perches <[email protected]>
Cc: Mark Rutland <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
|
|
Introduce 'perf stat -b' option, which counts events for BPF programs, like:
[root@localhost ~]# ~/perf stat -e ref-cycles,cycles -b 254 -I 1000
1.487903822 115,200 ref-cycles
1.487903822 86,012 cycles
2.489147029 80,560 ref-cycles
2.489147029 73,784 cycles
3.490341825 60,720 ref-cycles
3.490341825 37,797 cycles
4.491540887 37,120 ref-cycles
4.491540887 31,963 cycles
The example above counts 'cycles' and 'ref-cycles' of BPF program of id
254. This is similar to bpftool-prog-profile command, but more
flexible.
'perf stat -b' creates per-cpu perf_event and loads fentry/fexit BPF
programs (monitor-progs) to the target BPF program (target-prog). The
monitor-progs read perf_event before and after the target-prog, and
aggregate the difference in a BPF map. Then the user space reads data
from these maps.
A new 'struct bpf_counter' is introduced to provide a common interface
that uses BPF programs/maps to count perf events.
Committer notes:
Removed all but bpf_counter.h includes from evsel.h, not needed at all.
Also BPF map lookups for PERCPU_ARRAYs need to have as its value receive
buffer passed to the kernel libbpf_num_possible_cpus() entries, not
evsel__nr_cpus(evsel), as the former uses
/sys/devices/system/cpu/possible while the later uses
/sys/devices/system/cpu/online, which may be less than the 'possible'
number making the bpf map lookup overwrite memory and cause hard to
debug memory corruption.
We need to continue using evsel__nr_cpus(evsel) when accessing the
perf_counts array tho, not to overwrite another are of memory :-)
Signed-off-by: Song Liu <[email protected]>
Tested-by: Arnaldo Carvalho de Melo <[email protected]>
Link: https://lore.kernel.org/lkml/[email protected]/
Acked-by: Namhyung Kim <[email protected]>
Cc: Alexander Shishkin <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Mark Rutland <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: [email protected]
Link: http://lore.kernel.org/lkml/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
Fix the following coccicheck warning:
./tools/testing/selftests/arm64/mte/check_buffer_fill.c:84:12-35:
WARNING: Comparison to bool
Signed-off-by: YANG LI <[email protected]>
Reported-by: Abaci Robot<[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Will Deacon <[email protected]>
|
|
There are two spelling mistakes in check_fail messages. Fix them.
Signed-off-by: Colin Ian King <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
The previous test added an address with a specified metric and check if
correspond route was created. I somehow added two logs for the same
test. Remove the duplicated one.
Reported-by: Antoine Tenart <[email protected]>
Fixes: 0d29169a708b ("selftests/net/fib_tests: update addr_metric_test for peer route testing")
Signed-off-by: Hangbin Liu <[email protected]>
Reviewed-by: David Ahern <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
Newer binutils (>= 2.36) refuse to assemble lmw/stmw when building in
little endian mode. That breaks compilation of our alignment handler
test:
/tmp/cco4l14N.s: Assembler messages:
/tmp/cco4l14N.s:1440: Error: `lmw' invalid when little-endian
/tmp/cco4l14N.s:1814: Error: `stmw' invalid when little-endian
make[2]: *** [../../lib.mk:139: /output/kselftest/powerpc/alignment/alignment_handler] Error 1
These tests do pass on little endian machines, as the kernel will
still emulate those instructions even when running little
endian (which is arguably a kernel bug).
But we don't really need to test that case, so ifdef those
instructions out to get the alignment test building again.
Reported-by: Libor Pechacek <[email protected]>
Signed-off-by: Michael Ellerman <[email protected]>
Tested-by: Libor Pechacek <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
|
|
Since main() does not return a value explicitly, the
return values from FAIL_IF() conditions are ignored
and the tests can still pass irrespective of failures.
This makes sure that we always explicitly return the
correct test exit status.
Fixes: 1addb6444791 ("selftests/powerpc: Add test for execute-disabled pkeys")
Fixes: c27f2fd1705a ("selftests/powerpc: Add test for pkey siginfo verification")
Reported-by: Eirik Fuller <[email protected]>
Signed-off-by: Sandipan Das <[email protected]>
Signed-off-by: Michael Ellerman <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
|
|
Some platforms, such as mips64, don't map __u64 to long long unsigned
int so using %llu produces a warning:
gpio-watch.c: In function ‘main’:
gpio-watch.c:89:30: warning: format ‘%llu’ expects argument of type ‘long long unsigned int’, but argument 4 has type ‘__u64’ {aka ‘long unsigned int’} [-Wformat=]
89 | printf("line %u: %s at %llu\n",
| ~~~^
| |
| long long unsigned int
| %lu
90 | chg.info.offset, event, chg.timestamp_ns);
| ~~~~~~~~~~~~~~~~
| |
| __u64 {aka long unsigned int}
Replace the %llu with PRIu64 and cast the argument to uint64_t.
Fixes: 33f0c47b8fb4 ("tools: gpio: implement gpio-watch")
Signed-off-by: Kent Gibson <[email protected]>
Signed-off-by: Bartosz Golaszewski <[email protected]>
|
|
Some platforms, such as mips64, don't map __u64 to long long unsigned
int so using %llu produces a warning:
gpio-event-mon.c:110:37: warning: format ‘%llu’ expects argument of type ‘long long unsigned int’, but argument 3 has type ‘__u64’ {aka ‘long unsigned int’} [-Wformat=]
110 | fprintf(stdout, "GPIO EVENT at %llu on line %d (%d|%d) ",
| ~~~^
| |
| long long unsigned int
| %lu
111 | event.timestamp_ns, event.offset, event.line_seqno,
| ~~~~~~~~~~~~~~~~~~
| |
| __u64 {aka long unsigned int}
Replace the %llu with PRIu64 and cast the argument to uint64_t.
Fixes: 03fd11b03362 ("tools/gpio/gpio-event-mon: fix warning")
Signed-off-by: Kent Gibson <[email protected]>
Signed-off-by: Bartosz Golaszewski <[email protected]>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux
Pull perf tools fixes from Arnaldo Carvalho de Melo:
- Fix 'CPU too large' error in Intel PT
- Correct event attribute sizes in 'perf inject'
- Sync build_bug.h and kvm.h kernel copies
- Fix bpf.h header include directive in 5sec.c 'perf trace' bpf example
- libbpf tests fixes
- Fix shadow stat 'perf test' for non-bash shells
- Take cgroups into account for shadow stats in 'perf stat'
* tag 'perf-tools-fixes-2021-01-17' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux:
perf inject: Correct event attribute sizes
perf intel-pt: Fix 'CPU too large' error
perf stat: Take cgroups into account for shadow stats
perf stat: Introduce struct runtime_stat_data
libperf tests: Fail when failing to get a tracepoint id
libperf tests: If a test fails return non-zero
libperf tests: Avoid uninitialized variable warning
perf test: Fix shadow stat test for non-bash shells
tools headers: Syncronize linux/build_bug.h with the kernel sources
tools headers UAPI: Sync kvm.h headers with the kernel sources
perf bpf examples: Fix bpf.h header include directive in 5sec.c example
|
|
Following patch add support for flow based tunneling API
to send and recv GTP tunnel packet over tunnel metadata API.
This would allow this device integration with OVS or eBPF using
flow based tunneling APIs.
Signed-off-by: Pravin B Shelar <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
Daniel Borkmann says:
====================
pull-request: bpf-next 2021-01-16
1) Extend atomic operations to the BPF instruction set along with x86-64 JIT support,
that is, atomic{,64}_{xchg,cmpxchg,fetch_{add,and,or,xor}}, from Brendan Jackman.
2) Add support for using kernel module global variables (__ksym externs in BPF
programs) retrieved via module's BTF, from Andrii Nakryiko.
3) Generalize BPF stackmap's buildid retrieval and add support to have buildid
stored in mmap2 event for perf, from Jiri Olsa.
4) Various fixes for cross-building BPF sefltests out-of-tree which then will
unblock wider automated testing on ARM hardware, from Jean-Philippe Brucker.
5) Allow to retrieve SOL_SOCKET opts from sock_addr progs, from Daniel Borkmann.
6) Clean up driver's XDP buffer init and split into two helpers to init per-
descriptor and non-changing fields during processing, from Lorenzo Bianconi.
7) Minor misc improvements to libbpf & bpftool, from Ian Rogers.
* https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: (41 commits)
perf: Add build id data in mmap2 event
bpf: Add size arg to build_id_parse function
bpf: Move stack_map_get_build_id into lib
bpf: Document new atomic instructions
bpf: Add tests for new BPF atomic operations
bpf: Add bitwise atomic instructions
bpf: Pull out a macro for interpreting atomic ALU operations
bpf: Add instructions for atomic_[cmp]xchg
bpf: Add BPF_FETCH field / create atomic_fetch_add instruction
bpf: Move BPF_STX reserved field check into BPF_STX verifier code
bpf: Rename BPF_XADD and prepare to encode other atomics in .imm
bpf: x86: Factor out a lookup table for some ALU opcodes
bpf: x86: Factor out emission of REX byte
bpf: x86: Factor out emission of ModR/M for *(reg + off)
tools/bpftool: Add -Wall when building BPF programs
bpf, libbpf: Avoid unused function warning on bpf_tail_call_static
selftests/bpf: Install btf_dump test cases
selftests/bpf: Fix installation of urandom_read
selftests/bpf: Move generated test files to $(TEST_GEN_FILES)
selftests/bpf: Fix out-of-tree build
...
====================
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
LinuxSourceTree will unceremoniously crash if the user doesn't call
read_kunitconfig() first in a number of functions.
And currently every place we create an instance, the caller also calls
create_kunitconfig() and read_kunitconfig().
Move these instead into __init__() so they can't be forgotten and to
reduce copy-paste.
The https://github.com/google/pytype type-checker complained that
_config wasn't initialized. With this, kunit_tool now type checks
under both pytype and mypy.
Add an optional boolean that can be used to disable this for use cases
in the future where we might not need/want to load the config.
Signed-off-by: Daniel Latypov <[email protected]>
Reviewed-by: Brendan Higgins <[email protected]>
Tested-by: Brendan Higgins <[email protected]>
Signed-off-by: Shuah Khan <[email protected]>
|
|
The code to handle aggregating statuses didn't check that the status
actually got set to some non-None value.
Default the value to SUCCESS instead of adding a bunch of `is None`
checks.
This sorta follows the precedent in commit 3fc48259d525 ("kunit: Don't
fail test suites if one of them is empty").
Also slightly simplify the code and add type annotations.
Signed-off-by: Daniel Latypov <[email protected]>
Reviewed-by: David Gow <[email protected]>
Reviewed-by: Brendan Higgins <[email protected]>
Tested-by: Brendan Higgins <[email protected]>
Signed-off-by: Shuah Khan <[email protected]>
|
|
The authors of this tool were more familiar with a different
type-checker, https://github.com/google/pytype.
That's open source, but mypy seems more prevalent (and runs faster).
And unlike pytype, mypy doesn't try to infer types so it doesn't check
unanotated functions.
So annotate ~all functions in kunit tool to increase type-checking
coverage.
Note: per https://www.python.org/dev/peps/pep-0484/, `__init__()` should
be annotated as `-> None`.
Doing so makes mypy discover a number of new violations.
Exclude main() since we reuse `request` for the different types of
requests, which mypy isn't happy about.
This commit fixes all but one error, where `TestSuite.status` might be
None.
Signed-off-by: Daniel Latypov <[email protected]>
Reviewed-by: David Gow <[email protected]>
Tested-by: Brendan Higgins <[email protected]>
Acked-by: Brendan Higgins <[email protected]>
Signed-off-by: Shuah Khan <[email protected]>
|
|
Various helper functions were misspelling "diagnostic" in their names.
It finally got annoying, so fix it.
Signed-off-by: David Gow <[email protected]>
Reviewed-by: Brendan Higgins <[email protected]>
Tested-by: Brendan Higgins <[email protected]>
Signed-off-by: Shuah Khan <[email protected]>
|
|
Daniel Borkmann says:
====================
pull-request: bpf 2021-01-16
1) Fix a double bpf_prog_put() for BPF_PROG_{TYPE_EXT,TYPE_TRACING} types in
link creation's error path causing a refcount underflow, from Jiri Olsa.
2) Fix BTF validation errors for the case where kernel modules don't declare
any new types and end up with an empty BTF, from Andrii Nakryiko.
3) Fix BPF local storage helpers to first check their {task,inode} owners for
being NULL before access, from KP Singh.
4) Fix a memory leak in BPF setsockopt handling for the case where optlen is
zero and thus temporary optval buffer should be freed, from Stanislav Fomichev.
5) Fix a syzbot memory allocation splat in BPF_PROG_TEST_RUN infra for
raw_tracepoint caused by too big ctx_size_in, from Song Liu.
6) Fix LLVM code generation issues with verifier where PTR_TO_MEM{,_OR_NULL}
registers were spilled to stack but not recognized, from Gilad Reti.
* https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf:
MAINTAINERS: Update my email address
selftests/bpf: Add verifier test for PTR_TO_MEM spill
bpf: Support PTR_TO_MEM{,_OR_NULL} register spilling
bpf: Reject too big ctx_size_in for raw_tp test run
libbpf: Allow loading empty BTFs
bpf: Allow empty module BTFs
bpf: Don't leak memory in bpf getsockopt when optlen == 0
bpf: Update local storage test to check handling of null ptrs
bpf: Fix typo in bpf_inode_storage.c
bpf: Local storage helpers should check nullness of owner ptr passed
bpf: Prevent double bpf_prog_put call from bpf_tracing_prog_attach
====================
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 fixes from Catalin Marinas:
- Set the minimum GCC version to 5.1 for arm64 due to earlier compiler
bugs.
- Make atomic helpers __always_inline to avoid a section mismatch when
compiling with clang.
- Fix the CMA and crashkernel reservations to use ZONE_DMA (remove the
arm64_dma32_phys_limit variable, no longer needed with a dynamic
ZONE_DMA sizing in 5.11).
- Remove redundant IRQ flag tracing that was leaving lockdep
inconsistent with the hardware state.
- Revert perf events based hard lockup detector that was causing
smp_processor_id() to be called in preemptible context.
- Some trivial cleanups - spelling fix, renaming S_FRAME_SIZE to
PT_REGS_SIZE, function prototypes added.
* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
arm64: selftests: Fix spelling of 'Mismatch'
arm64: syscall: include prototype for EL0 SVC functions
compiler.h: Raise minimum version of GCC to 5.1 for arm64
arm64: make atomic helpers __always_inline
arm64: rename S_FRAME_SIZE to PT_REGS_SIZE
Revert "arm64: Enable perf events based hard lockup detector"
arm64: entry: remove redundant IRQ flag tracing
arm64: Remove arm64_dma32_phys_limit and its uses
|
|
When 'perf inject' reads a perf.data file from an older version of perf,
it writes event attributes into the output with the original size field,
but lays them out as if they had the size currently used. Readers see a
corrupt file. Update the size field to match the layout.
Signed-off-by: Al Grant <[email protected]>
Acked-by: Jiri Olsa <[email protected]>
Cc: Alexander Shishkin <[email protected]>
Cc: Mark Rutland <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Link: http://lore.kernel.org/lkml/[email protected]
Signed-off-by: Denis Nikitin <[email protected]>
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
In some cases, the number of cpus (nr_cpus_online) is confused with the
maximum cpu number (nr_cpus_avail), which results in the error in the
example below:
Example on system with 8 cpus:
Before:
# echo 0 > /sys/devices/system/cpu/cpu2/online
# ./perf record --kcore -e intel_pt// taskset --cpu-list 7 uname
Linux
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.147 MB perf.data ]
# ./perf script --itrace=e
Requested CPU 7 too large. Consider raising MAX_NR_CPUS
0x25908 [0x8]: failed to process type: 68 [Invalid argument]
After:
# ./perf script --itrace=e
#
Fixes: 8c7274691f0d ("perf machine: Replace MAX_NR_CPUS with perf_env::nr_cpus_online")
Fixes: 7df4e36a4785 ("perf session: Replace MAX_NR_CPUS with perf_env::nr_cpus_online")
Signed-off-by: Adrian Hunter <[email protected]>
Tested-by: Kan Liang <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: [email protected]
Link: http://lore.kernel.org/lkml/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
As of now it doesn't consider cgroups when collecting shadow stats and
metrics so counter values from different cgroups will be saved in a same
slot. This resulted in incorrect numbers when those cgroups have
different workloads.
For example, let's look at the scenario below: cgroups A and C runs same
workload which burns a cpu while cgroup B runs a light workload.
$ perf stat -a -e cycles,instructions --for-each-cgroup A,B,C sleep 1
Performance counter stats for 'system wide':
3,958,116,522 cycles A
6,722,650,929 instructions A # 2.53 insn per cycle
1,132,741 cycles B
571,743 instructions B # 0.00 insn per cycle
4,007,799,935 cycles C
6,793,181,523 instructions C # 2.56 insn per cycle
1.001050869 seconds time elapsed
When I run 'perf stat' with single workload, it usually shows IPC around
1.7. We can verify it (6,722,650,929.0 / 3,958,116,522 = 1.698) for cgroup A.
But in this case, since cgroups are ignored, cycles are averaged so it
used the lower value for IPC calculation and resulted in around 2.5.
avg cycle: (3958116522 + 1132741 + 4007799935) / 3 = 2655683066
IPC (A) : 6722650929 / 2655683066 = 2.531
IPC (B) : 571743 / 2655683066 = 0.0002
IPC (C) : 6793181523 / 2655683066 = 2.557
We can simply compare cgroup pointers in the evsel and it'll be NULL
when cgroups are not specified. With this patch, I can see correct
numbers like below:
$ perf stat -a -e cycles,instructions --for-each-cgroup A,B,C sleep 1
Performance counter stats for 'system wide':
4,171,051,687 cycles A
7,219,793,922 instructions A # 1.73 insn per cycle
1,051,189 cycles B
583,102 instructions B # 0.55 insn per cycle
4,171,124,710 cycles C
7,192,944,580 instructions C # 1.72 insn per cycle
1.007909814 seconds time elapsed
Signed-off-by: Namhyung Kim <[email protected]>
Acked-by: Jiri Olsa <[email protected]>
Cc: Alexander Shishkin <[email protected]>
Cc: Andi Kleen <[email protected]>
Cc: Ian Rogers <[email protected]>
Cc: Jin Yao <[email protected]>
Cc: Mark Rutland <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Stephane Eranian <[email protected]>
Link: http://lore.kernel.org/lkml/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
To pass more info to the saved_value in the runtime_stat, add a new
struct runtime_stat_data. Currently it only has 'ctx' field but later
patch will add more.
Note that we intentionally pass 0 as ctx to clock-related events for
compatibility. It was already there in a few places. So move the code
into the saved_value_lookup() explicitly and add a comment.
Suggested-by: Andi Kleen <[email protected]>
Signed-off-by: Namhyung Kim <[email protected]>
Acked-by: Jiri Olsa <[email protected]>
Cc: Alexander Shishkin <[email protected]>
Cc: Andi Kleen <[email protected]>
Cc: Ian Rogers <[email protected]>
Cc: Jin Yao <[email protected]>
Cc: Mark Rutland <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Stephane Eranian <[email protected]>
Link: http://lore.kernel.org/lkml/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
Permissions are necessary to get a tracepoint id. Fail the test when the
read fails.
Signed-off-by: Ian Rogers <[email protected]>
Acked-by: Jiri Olsa <[email protected]>
Cc: Alexander Shishkin <[email protected]>
Cc: Mark Rutland <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Stephane Eranian <[email protected]>
Link: http://lore.kernel.org/lkml/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
If a test fails return -1 rather than 0. This is consistent with the
return value in test-cpumap.c
Signed-off-by: Ian Rogers <[email protected]>
Acked-by: Jiri Olsa <[email protected]>
Cc: Alexander Shishkin <[email protected]>
Cc: Mark Rutland <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Stephane Eranian <[email protected]>
Link: http://lore.kernel.org/lkml/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
The variable 'bf' is read (for a write call) without being initialized
triggering a memory sanitizer warning. Use 'bf' in the read and switch
the write to reading from a string.
Signed-off-by: Ian Rogers <[email protected]>
Acked-by: Jiri Olsa <[email protected]>
Acked-by: Namhyung Kim <[email protected]>
Cc: Alexander Shishkin <[email protected]>
Cc: Mark Rutland <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Stephane Eranian <[email protected]>
Link: http://lore.kernel.org/lkml/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
It was using some bash-specific features and failed to parse when
running with a different shell like below:
root@kbl-ppc:~/kbl-ws/perf-dev/lck-9077/acme.tmp/tools/perf# ./perf test 83 -vv
83: perf stat metrics (shadow stat) test :
--- start ---
test child forked, pid 3922
./tests/shell/stat+shadow_stat.sh: 19: ./tests/shell/stat+shadow_stat.sh: [[: not found
./tests/shell/stat+shadow_stat.sh: 24: ./tests/shell/stat+shadow_stat.sh: [[: not found
./tests/shell/stat+shadow_stat.sh: 30: ./tests/shell/stat+shadow_stat.sh: [[: not found
(standard_in) 2: syntax error
./tests/shell/stat+shadow_stat.sh: 36: ./tests/shell/stat+shadow_stat.sh: [[: not found
./tests/shell/stat+shadow_stat.sh: 19: ./tests/shell/stat+shadow_stat.sh: [[: not found
./tests/shell/stat+shadow_stat.sh: 24: ./tests/shell/stat+shadow_stat.sh: [[: not found
./tests/shell/stat+shadow_stat.sh: 30: ./tests/shell/stat+shadow_stat.sh: [[: not found
(standard_in) 2: syntax error
./tests/shell/stat+shadow_stat.sh: 36: ./tests/shell/stat+shadow_stat.sh: [[: not found
./tests/shell/stat+shadow_stat.sh: 45: ./tests/shell/stat+shadow_stat.sh: declare: not found
test child finished with -1
---- end ----
perf stat metrics (shadow stat) test: FAILED!
Reported-by: Jin Yao <[email protected]>
Signed-off-by: Namhyung Kim <[email protected]>
Acked-by: Jiri Olsa <[email protected]>
Cc: Alexander Shishkin <[email protected]>
Cc: Andi Kleen <[email protected]>
Cc: David Laight <[email protected]>
Cc: Ian Rogers <[email protected]>
Cc: Mark Rutland <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Stephane Eranian <[email protected]>
Link: http://lore.kernel.org/lkml/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
To pick up the changes in:
3a176b94609a18f5 ("Revert "kbuild: avoid static_assert for genksyms"")
And silence this perf build warning:
Warning: Kernel ABI header at 'tools/include/linux/build_bug.h' differs from latest version at 'include/linux/build_bug.h'
diff -u tools/include/linux/build_bug.h include/linux/build_bug.h
Cc: Adrian Hunter <[email protected]>
Cc: Ian Rogers <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Masahiro Yamada <[email protected]>
Cc: Namhyung Kim <[email protected]>
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
To pick the changes in:
647daca25d24fb6e ("KVM: SVM: Add support for booting APs in an SEV-ES guest")
That don't cause any tooling change, just silences this perf build
warning:
Warning: Kernel ABI header at 'tools/include/uapi/linux/kvm.h' differs from latest version at 'include/uapi/linux/kvm.h'
diff -u tools/include/uapi/linux/kvm.h include/uapi/linux/kvm.h
Cc: Adrian Hunter <[email protected]>
Cc: Ian Rogers <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Paolo Bonzini <[email protected]>
Cc: Tom Lendacky <[email protected]>
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
It was looking at bpf/bpf.h, which caused this problem:
# perf trace -e tools/perf/examples/bpf/5sec.c
/home/acme/git/perf/tools/perf/examples/bpf/5sec.c:42:10: fatal error: 'bpf/bpf.h' file not found
#include <bpf/bpf.h>
^~~~~~~~~~~
1 error generated.
ERROR: unable to compile tools/perf/examples/bpf/5sec.c
Hint: Check error message shown above.
Hint: You can also pre-compile it into .o using:
clang -target bpf -O2 -c tools/perf/examples/bpf/5sec.c
with proper -I and -D options.
event syntax error: 'tools/perf/examples/bpf/5sec.c'
\___ Failed to load tools/perf/examples/bpf/5sec.c from source: Error when compiling BPF scriptlet
#
Change that to plain bpf.h, to make it work again:
# perf trace -e tools/perf/examples/bpf/5sec.c sleep 5s
0.000 perf_bpf_probe:hrtimer_nanosleep(__probe_ip: -1776891872, rqtp: 5000000000)
# perf trace -e tools/perf/examples/bpf/5sec.c/max-stack=16/ sleep 5s
0.000 perf_bpf_probe:hrtimer_nanosleep(__probe_ip: -1776891872, rqtp: 5000000000)
hrtimer_nanosleep ([kernel.kallsyms])
common_nsleep ([kernel.kallsyms])
__x64_sys_clock_nanosleep ([kernel.kallsyms])
do_syscall_64 ([kernel.kallsyms])
entry_SYSCALL_64_after_hwframe ([kernel.kallsyms])
__clock_nanosleep_2 (/usr/lib64/libc-2.32.so)
# perf trace -e tools/perf/examples/bpf/5sec.c sleep 4s
#
Cc: Adrian Hunter <[email protected]>
Cc: Ian Rogers <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Namhyung Kim <[email protected]>
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
BPF programs are useful in perf to profile BPF programs.
BPF skeleton is by far the easiest way to write BPF tools. Enable
building BPF skeletons in util/bpf_skel. A dummy bpf skeleton is added.
More bpf skeletons will be added for different use cases.
Signed-off-by: Song Liu <[email protected]>
Tested-by: Arnaldo Carvalho de Melo <[email protected]>
Acked-by: Jiri Olsa <[email protected]>
Acked-by: Namhyung Kim <[email protected]>
Cc: Alexander Shishkin <[email protected]>
Cc: Mark Rutland <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: [email protected]
Link: http://lore.kernel.org/lkml/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
This target is used to only build the bootstrap bpftool, which will be
used to generate bpf skeletons for other tools, like perf.
Signed-off-by: Song Liu <[email protected]>
Tested-by: Arnaldo Carvalho de Melo <[email protected]>
Acked-by: Namhyung Kim <[email protected]>
Cc: Alexander Shishkin <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Mark Rutland <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: [email protected]
Link: http://lore.kernel.org/lkml/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
The SVE and FPSIMD stress tests have a spelling mistake in the output, fix
it.
Signed-off-by: Mark Brown <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Catalin Marinas <[email protected]>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace
Pull bootconfig fix from Steven Rostedt:
"Update bootconf scripts for tracing_on option
The tracing_on option is supported by bootconfig entries, but the
scripts to convert from ftrace to a bootconfig and back were not
updated"
* tag 'trace-v5.11-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
tools/bootconfig: Add tracing_on support to helper scripts
|
|
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
The prog_test that's added depends on Clang/LLVM features added by
Yonghong in commit 286daafd6512 (was https://reviews.llvm.org/D72184).
Note the use of a define called ENABLE_ATOMICS_TESTS: this is used
to:
- Avoid breaking the build for people on old versions of Clang
- Avoid needing separate lists of test objects for no_alu32, where
atomics are not supported even if Clang has the feature.
The atomics_test.o BPF object is built unconditionally both for
test_progs and test_progs-no_alu32. For test_progs, if Clang supports
atomics, ENABLE_ATOMICS_TESTS is defined, so it includes the proper
test code. Otherwise, progs and global vars are defined anyway, as
stubs; this means that the skeleton user code still builds.
The atomics_test.o userspace object is built once and used for both
test_progs and test_progs-no_alu32. A variable called skip_tests is
defined in the BPF object's data section, which tells the userspace
object whether to skip the atomics test.
Signed-off-by: Brendan Jackman <[email protected]>
Signed-off-by: Alexei Starovoitov <[email protected]>
Acked-by: Yonghong Song <[email protected]>
Link: https://lore.kernel.org/bpf/[email protected]
|
|
This adds instructions for
atomic[64]_[fetch_]and
atomic[64]_[fetch_]or
atomic[64]_[fetch_]xor
All these operations are isomorphic enough to implement with the same
verifier, interpreter, and x86 JIT code, hence being a single commit.
The main interesting thing here is that x86 doesn't directly support
the fetch_ version these operations, so we need to generate a CMPXCHG
loop in the JIT. This requires the use of two temporary registers,
IIUC it's safe to use BPF_REG_AX and x86's AUX_REG for this purpose.
Signed-off-by: Brendan Jackman <[email protected]>
Signed-off-by: Alexei Starovoitov <[email protected]>
Acked-by: Yonghong Song <[email protected]>
Link: https://lore.kernel.org/bpf/[email protected]
|
|
This adds two atomic opcodes, both of which include the BPF_FETCH
flag. XCHG without the BPF_FETCH flag would naturally encode
atomic_set. This is not supported because it would be of limited
value to userspace (it doesn't imply any barriers). CMPXCHG without
BPF_FETCH woulud be an atomic compare-and-write. We don't have such
an operation in the kernel so it isn't provided to BPF either.
There are two significant design decisions made for the CMPXCHG
instruction:
- To solve the issue that this operation fundamentally has 3
operands, but we only have two register fields. Therefore the
operand we compare against (the kernel's API calls it 'old') is
hard-coded to be R0. x86 has similar design (and A64 doesn't
have this problem).
A potential alternative might be to encode the other operand's
register number in the immediate field.
- The kernel's atomic_cmpxchg returns the old value, while the C11
userspace APIs return a boolean indicating the comparison
result. Which should BPF do? A64 returns the old value. x86 returns
the old value in the hard-coded register (and also sets a
flag). That means return-old-value is easier to JIT, so that's
what we use.
Signed-off-by: Brendan Jackman <[email protected]>
Signed-off-by: Alexei Starovoitov <[email protected]>
Acked-by: Yonghong Song <[email protected]>
Link: https://lore.kernel.org/bpf/[email protected]
|
|
The BPF_FETCH field can be set in bpf_insn.imm, for BPF_ATOMIC
instructions, in order to have the previous value of the
atomically-modified memory location loaded into the src register
after an atomic op is carried out.
Suggested-by: Yonghong Song <[email protected]>
Signed-off-by: Brendan Jackman <[email protected]>
Signed-off-by: Alexei Starovoitov <[email protected]>
Acked-by: John Fastabend <[email protected]>
Link: https://lore.kernel.org/bpf/[email protected]
|
|
A subsequent patch will add additional atomic operations. These new
operations will use the same opcode field as the existing XADD, with
the immediate discriminating different operations.
In preparation, rename the instruction mode BPF_ATOMIC and start
calling the zero immediate BPF_ADD.
This is possible (doesn't break existing valid BPF progs) because the
immediate field is currently reserved MBZ and BPF_ADD is zero.
All uses are removed from the tree but the BPF_XADD definition is
kept around to avoid breaking builds for people including kernel
headers.
Signed-off-by: Brendan Jackman <[email protected]>
Signed-off-by: Alexei Starovoitov <[email protected]>
Acked-by: Björn Töpel <[email protected]>
Link: https://lore.kernel.org/bpf/[email protected]
|
|
Add separate option to nettest to specify local address
binding in client mode.
Signed-off-by: David Ahern <[email protected]>
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
Signed-off-by: David Ahern <[email protected]>
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
Add new options to nettest to specify device binding and expected
device binding for server mode, and update fcnal-test script. This
is needed to allow a single instance of nettest running both server
and client modes to use different device bindings.
Signed-off-by: David Ahern <[email protected]>
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
Add new option to nettest to specify MD5 password to use for client
side. Update fcnal-test script. This is needed for a single instance
running both server and client modes to test password mismatches.
Signed-off-by: David Ahern <[email protected]>
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
nettest started with -r as the remote address for MD5 passwords.
The -m argument was added to use prefixes with a length when that
feature was added to the kernel. Since -r is used to specify
remote address for client mode, change nettest to only use -m
for MD5 passwords and update fcnal-test script.
Signed-off-by: David Ahern <[email protected]>
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
When a single instance of nettest is used for client and server
make sure address validation is only done for client mode.
Signed-off-by: David Ahern <[email protected]>
Signed-off-by: Jakub Kicinski <[email protected]>
|