| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Signed-off-by: Len Brown <[email protected]>
|
|
Intel Xeon servers used to use a fixed energy resolution (15.3uj) for
Dram RAPL domain. But on SPR, Dram RAPL domain follows the standard
energy resolution as described in MSR_RAPL_POWER_UNIT.
Remove the SPR rapl_dram_energy_units quirk.
Fixes: e7af1ed3fa47 ("tools/power turbostat: Support additional CPU model numbers")
Signed-off-by: Zhang Rui <[email protected]>
Tested-by: Wang Wendy <[email protected]>
Signed-off-by: Len Brown <[email protected]>
|
|
Do not dump turbo ratio limits if platform does not support turbo, because it
is confusing and the TRL MSRs may even include misleading information. And they
are not supposed to be relied on if turbo is not supported.
Signed-off-by: Artem Bityutskiy <[email protected]>
Signed-off-by: Len Brown <[email protected]>
|
|
Add turbostat support for MeteorLake platforms, which behave the same
as RaptorLake platforms.
Signed-off-by: Zhang Rui <[email protected]>
Signed-off-by: Len Brown <[email protected]>
|
|
Add turbostat support for RAPTORLAKE_S platform, which behaves the same
as RAPTORLAKE and RAPTORLAKE_P platforms.
RPL-S 601/801 have different CPU ID than the Hybrid ADL-S platforms.
Signed-off-by: Zhang Rui <[email protected]>
Signed-off-by: Len Brown <[email protected]>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next
Pull networking updates from Jakub Kicinski:
"Core:
- Introduce and use a single page frag cache for allocating small skb
heads, clawing back the 10-20% performance regression in UDP flood
test from previous fixes.
- Run packets which already went thru HW coalescing thru SW GRO. This
significantly improves TCP segment coalescing and simplifies
deployments as different workloads benefit from HW or SW GRO.
- Shrink the size of the base zero-copy send structure.
- Move TCP init under a new slow / sleepable version of DO_ONCE().
BPF:
- Add BPF-specific, any-context-safe memory allocator.
- Add helpers/kfuncs for PKCS#7 signature verification from BPF
programs.
- Define a new map type and related helpers for user space -> kernel
communication over a ring buffer (BPF_MAP_TYPE_USER_RINGBUF).
- Allow targeting BPF iterators to loop through resources of one
task/thread.
- Add ability to call selected destructive functions. Expose
crash_kexec() to allow BPF to trigger a kernel dump. Use
CAP_SYS_BOOT check on the loading process to judge permissions.
- Enable BPF to collect custom hierarchical cgroup stats efficiently
by integrating with the rstat framework.
- Support struct arguments for trampoline based programs. Only
structs with size <= 16B and x86 are supported.
- Invoke cgroup/connect{4,6} programs for unprivileged ICMP ping
sockets (instead of just TCP and UDP sockets).
- Add a helper for accessing CLOCK_TAI for time sensitive network
related programs.
- Support accessing network tunnel metadata's flags.
- Make TCP SYN ACK RTO tunable by BPF programs with TCP Fast Open.
- Add support for writing to Netfilter's nf_conn:mark.
Protocols:
- WiFi: more Extremely High Throughput (EHT) and Multi-Link Operation
(MLO) work (802.11be, WiFi 7).
- vsock: improve support for SO_RCVLOWAT.
- SMC: support SO_REUSEPORT.
- Netlink: define and document how to use netlink in a "modern" way.
Support reporting missing attributes via extended ACK.
- IPSec: support collect metadata mode for xfrm interfaces.
- TCPv6: send consistent autoflowlabel in SYN_RECV state and RST
packets.
- TCP: introduce optional per-netns connection hash table to allow
better isolation between namespaces (opt-in, at the cost of memory
and cache pressure).
- MPTCP: support TCP_FASTOPEN_CONNECT.
- Add NEXT-C-SID support in Segment Routing (SRv6) End behavior.
- Adjust IP_UNICAST_IF sockopt behavior for connected UDP sockets.
- Open vSwitch:
- Allow specifying ifindex of new interfaces.
- Allow conntrack and metering in non-initial user namespace.
- TLS: support the Korean ARIA-GCM crypto algorithm.
- Remove DECnet support.
Driver API:
- Allow selecting the conduit interface used by each port in DSA
switches, at runtime.
- Ethernet Power Sourcing Equipment and Power Device support.
- Add tc-taprio support for queueMaxSDU parameter, i.e. setting per
traffic class max frame size for time-based packet schedules.
- Support PHY rate matching - adapting between differing host-side
and link-side speeds.
- Introduce QUSGMII PHY mode and 1000BASE-KX interface mode.
- Validate OF (device tree) nodes for DSA shared ports; make
phylink-related properties mandatory on DSA and CPU ports.
Enforcing more uniformity should allow transitioning to phylink.
- Require that flash component name used during update matches one of
the components for which version is reported by info_get().
- Remove "weight" argument from driver-facing NAPI API as much as
possible. It's one of those magic knobs which seemed like a good
idea at the time but is too indirect to use in practice.
- Support offload of TLS connections with 256 bit keys.
New hardware / drivers:
- Ethernet:
- Microchip KSZ9896 6-port Gigabit Ethernet Switch
- Renesas Ethernet AVB (EtherAVB-IF) Gen4 SoCs
- Analog Devices ADIN1110 and ADIN2111 industrial single pair
Ethernet (10BASE-T1L) MAC+PHY.
- Rockchip RV1126 Gigabit Ethernet (a version of stmmac IP).
- Ethernet SFPs / modules:
- RollBall / Hilink / Turris 10G copper SFPs
- HALNy GPON module
- WiFi:
- CYW43439 SDIO chipset (brcmfmac)
- CYW89459 PCIe chipset (brcmfmac)
- BCM4378 on Apple platforms (brcmfmac)
Drivers:
- CAN:
- gs_usb: HW timestamp support
- Ethernet PHYs:
- lan8814: cable diagnostics
- Ethernet NICs:
- Intel (100G):
- implement control of FCS/CRC stripping
- port splitting via devlink
- L2TPv3 filtering offload
- nVidia/Mellanox:
- tunnel offload for sub-functions
- MACSec offload, w/ Extended packet number and replay window
offload
- significantly restructure, and optimize the AF_XDP support,
align the behavior with other vendors
- Huawei:
- configuring DSCP map for traffic class selection
- querying standard FEC statistics
- querying SerDes lane number via ethtool
- Marvell/Cavium:
- egress priority flow control
- MACSec offload
- AMD/SolarFlare:
- PTP over IPv6 and raw Ethernet
- small / embedded:
- ax88772: convert to phylink (to support SFP cages)
- altera: tse: convert to phylink
- ftgmac100: support fixed link
- enetc: standard Ethtool counters
- macb: ZynqMP SGMII dynamic configuration support
- tsnep: support multi-queue and use page pool
- lan743x: Rx IP & TCP checksum offload
- igc: add xdp frags support to ndo_xdp_xmit
- Ethernet high-speed switches:
- Marvell (prestera):
- support SPAN port features (traffic mirroring)
- nexthop object offloading
- Microchip (sparx5):
- multicast forwarding offload
- QoS queuing offload (tc-mqprio, tc-tbf, tc-ets)
- Ethernet embedded switches:
- Marvell (mv88e6xxx):
- support RGMII cmode
- NXP (felix):
- standardized ethtool counters
- Microchip (lan966x):
- QoS queuing offload (tc-mqprio, tc-tbf, tc-cbs, tc-ets)
- traffic policing and mirroring
- link aggregation / bonding offload
- QUSGMII PHY mode support
- Qualcomm 802.11ax WiFi (ath11k):
- cold boot calibration support on WCN6750
- support to connect to a non-transmit MBSSID AP profile
- enable remain-on-channel support on WCN6750
- Wake-on-WLAN support for WCN6750
- support to provide transmit power from firmware via nl80211
- support to get power save duration for each client
- spectral scan support for 160 MHz
- MediaTek WiFi (mt76):
- WiFi-to-Ethernet bridging offload for MT7986 chips
- RealTek WiFi (rtw89):
- P2P support"
* tag 'net-next-6.1' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1864 commits)
eth: pse: add missing static inlines
once: rename _SLOW to _SLEEPABLE
net: pse-pd: add regulator based PSE driver
dt-bindings: net: pse-dt: add bindings for regulator based PoDL PSE controller
ethtool: add interface to interact with Ethernet Power Equipment
net: mdiobus: search for PSE nodes by parsing PHY nodes.
net: mdiobus: fwnode_mdiobus_register_phy() rework error handling
net: add framework to support Ethernet PSE and PDs devices
dt-bindings: net: phy: add PoDL PSE property
net: marvell: prestera: Propagate nh state from hw to kernel
net: marvell: prestera: Add neighbour cache accounting
net: marvell: prestera: add stub handler neighbour events
net: marvell: prestera: Add heplers to interact with fib_notifier_info
net: marvell: prestera: Add length macros for prestera_ip_addr
net: marvell: prestera: add delayed wq and flush wq on deinit
net: marvell: prestera: Add strict cleanup of fib arbiter
net: marvell: prestera: Add cleanup of allocated fib_nodes
net: marvell: prestera: Add router nexthops ABI
eth: octeon: fix build after netif_napi_add() changes
net/mlx5: E-Switch, Return EBUSY if can't get mode lock
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 cpu updates from Borislav Petkov:
- Print the CPU number at segfault time.
The number printed is not always accurate (preemption is enabled at
that time) but the print string contains "likely" and after a lot of
back'n'forth on this, this was the consensus that was reached. See
thread at [1].
- After a *lot* of testing and polishing, finally the clear_user()
improvements to inline REP; STOSB by default
Link: https://lore.kernel.org/r/[email protected] [1]
* tag 'x86_cpu_for_v6.1_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/mm: Print likely CPU at segfault time
x86/clear_user: Make it faster
|
|
This commit introduces a script for testing java symbols.
The test records java program, inject samples with JIT samples, check
specific JIT symbols in the report, the test will pass only when these
two symbols are detected.
Suggested-by: Ian Rogers <[email protected]>
Signed-off-by: Leo Yan <[email protected]>
Cc: Alexander Shishkin <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Mark Rutland <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
Set environment variable "PREFIX", it will be used by invoked shell
script, e.g. the shell script uses it to find lib paths.
Signed-off-by: Leo Yan <[email protected]>
Cc: Alexander Shishkin <[email protected]>
Cc: Ian Rogers <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Mark Rutland <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
When parsing flags in filter, the strtoul function uses wrong parsing
condition (tok[1] = 'x'), which can make the flags be corrupted and
treat all numbers start with 0 as hex.
In fact strtoul() will auto test hex format when base == 0 (See
_parse_integer_fixup_radix). So there is no need to test this again.
Remove the unnessesary is_hexa test.
Fixes: 154c978d484c6104 ("libbeauty: Introduce strarray__strtoul_flags()")
Signed-off-by: Chen Zhongjin <[email protected]>
Cc: Adrian Hunter <[email protected]>
Cc: Alexander Shishkin <[email protected]>
Cc: Andi Kleen <[email protected]>
Cc: Florian Fischer <[email protected]>
Cc: Ian Rogers <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: John Garry <[email protected]>
Cc: Mark Rutland <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Link: http://lore.kernel.org/lkml/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
trace__fprintf_tp_fields() will always print arg names because when
implemented it is forced to print arg_names with:
(1 || trace->show_arg_names)
So the printing looks like:
> cat ~/.perfconfig
[trace]
show_arg_names = no
> perf trace -e syscalls:*mmap sleep 1
0.000 sleep/1119 syscalls:sys_enter_mmap(NULL, 8192, READ|WRITE, PRIVATE|ANONYMOUS)
0.179 sleep/1119 syscalls:sys_exit_mmap(__syscall_nr: 9, ret: 140535426170880)
...
Although the comment said that perhaps we need a show_tp_arg_names.
I don't think it's necessary to control them separately because it's not
so clean that part of the log shows arg names but other not.
Also when we are tracing functions it's rare to especially distinguish
syscalls and tp trace.
Only use one option to control arg names printing is more resonable and
simple. So remove the force condition and commit.
After fix:
> perf trace -e syscalls:*mmap sleep 1
0.000 sleep/1121 syscalls:sys_enter_mmap(NULL, 8192, READ|WRITE, PRIVATE|ANONYMOUS)
0.163 sleep/1121 syscalls:sys_exit_mmap(9, 140454467661824)
...
Fixes: f11b2803bb88655d ("perf trace: Allow choosing how to augment the tracepoint arguments")
Signed-off-by: Chen Zhongjin <[email protected]>
Cc: Adrian Hunter <[email protected]>
Cc: Alexander Shishkin <[email protected]>
Cc: Andi Kleen <[email protected]>
Cc: Florian Fischer <[email protected]>
Cc: Ian Rogers <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: John Garry <[email protected]>
Cc: Mark Rutland <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Link: http://lore.kernel.org/lkml/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
Unused macro reported by [-Wunused-macros].
This macro is introduced to calculate the 'unit' size, in:
d2fb8b4151a92223 ("perf tools: Add new perf_atoll() function to parse string representing size in bytes")
8ba7f6c2faada3ad ("saner perf_atoll()")
This commit has simplified the perf_atoll() function and remove the
'unit' variable. This macro is not deleted, but nowhere else is using
it.
A single letter macro is confusing and easy to be misused. So remove it
for code cleaning.
Signed-off-by: Chen Zhongjin <[email protected]>
Cc: Adrian Hunter <[email protected]>
Cc: Alexander Shishkin <[email protected]>
Cc: Andi Kleen <[email protected]>
Cc: Florian Fischer <[email protected]>
Cc: Ian Rogers <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: John Garry <[email protected]>
Cc: Mark Rutland <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Link: http://lore.kernel.org/lkml/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
Add a new shell test to check if both normal 'perf lock record' +
contention and BPF (with -b) option are working.
Use 'perf bench sched messaging' as a workload since it creates some
contention for sending and receiving messages.
Signed-off-by: Namhyung Kim <[email protected]>
Acked-by: Adrian Hunter <[email protected]>
Acked-by: Ian Rogers <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
Like in 'perf report', this option is to suppress header and debug messages.
Signed-off-by: Namhyung Kim <[email protected]>
Acked-by: Ian Rogers <[email protected]>
Cc: Adrian Hunter <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
Like in 'perf top', the -E option can limit number of entries to print.
It can be useful when users want to see top N contended locks only.
Signed-off-by: Namhyung Kim <[email protected]>
Acked-by: Ian Rogers <[email protected]>
Cc: Adrian Hunter <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
Let helper functions accept a parameter to specify time out values in
tenths of a second.
Signed-off-by: Adrian Hunter <[email protected]>
Acked-by: Namhyung Kim <[email protected]>
Cc: Ian Rogers <[email protected]>
Cc: Jiri Olsa <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
Move helper functions for waiting to a separate file so they can be
shared.
Signed-off-by: Adrian Hunter <[email protected]>
Acked-by: Namhyung Kim <[email protected]>
Cc: Ian Rogers <[email protected]>
Cc: Jiri Olsa <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
When tracing the kernel with Intel PT, text_poke events are recorded
per-cpu. In per-thread mode that results in a mixture of per-thread and
per-cpu events and mmaps. Check that happens correctly.
The debug output from perf record -vvv is recorded and then awk used to
process the debug messages that indicate what file descriptors were
opened and whether they were mmapped or set-output.
Signed-off-by: Adrian Hunter <[email protected]>
Cc: Ian Rogers <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Namhyung Kim <[email protected]>
Link: http://lore.kernel.org/lkml/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
Add debug messages to enable scripts to track aspects of 'perf record'
behaviour. The messages will be consumed after 'perf record' has run,
with the exception of "perf record has started" which is consequently
flushed.
Put comments so developers know which messages are also being used by test
scripts.
Signed-off-by: Adrian Hunter <[email protected]>
Acked-by: Namhyung Kim <[email protected]>
Cc: Ian Rogers <[email protected]>
Cc: Jiri Olsa <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
When there are more tests it won't be obvious which test failed. Add more
output so that it is.
Signed-off-by: Adrian Hunter <[email protected]>
Acked-by: Namhyung Kim <[email protected]>
Cc: Ian Rogers <[email protected]>
Cc: Jiri Olsa <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
The use of set -e will cause a function that returns non-zero to terminate
the script unless the result is consumed by || for example. That is OK if
there is only 1 test function, but not if there are more. Prepare for more
by using ||.
Signed-off-by: Adrian Hunter <[email protected]>
Acked-by: Namhyung Kim <[email protected]>
Cc: Ian Rogers <[email protected]>
Cc: Jiri Olsa <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
As suggested by shellcheck, use quotes around variable expansion.
Signed-off-by: Adrian Hunter <[email protected]>
Acked-by: Namhyung Kim <[email protected]>
Cc: Ian Rogers <[email protected]>
Cc: Jiri Olsa <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
As suggested by shellcheck, use grep -c instead of grep plus wc -l
Signed-off-by: Adrian Hunter <[email protected]>
Acked-by: Namhyung Kim <[email protected]>
Cc: Ian Rogers <[email protected]>
Cc: Jiri Olsa <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
As suggested by shellcheck, stop using backticks.
Signed-off-by: Adrian Hunter <[email protected]>
Acked-by: Namhyung Kim <[email protected]>
Cc: Ian Rogers <[email protected]>
Cc: Jiri Olsa <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
As suggested by shellcheck, stop using expr.
Signed-off-by: Adrian Hunter <[email protected]>
Acked-by: Namhyung Kim <[email protected]>
Cc: Ian Rogers <[email protected]>
Cc: Jiri Olsa <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
As reported by shellcheck, 2>&1 must come after >/dev/null
Signed-off-by: Adrian Hunter <[email protected]>
Acked-by: Namhyung Kim <[email protected]>
Cc: Ian Rogers <[email protected]>
Cc: Jiri Olsa <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
Create a directory for temporary files so that mktemp needs to be used
only once. It also enables more temp files to be added without having to
add them also to the cleanup.
Signed-off-by: Adrian Hunter <[email protected]>
Acked-by: Namhyung Kim <[email protected]>
Cc: Ian Rogers <[email protected]>
Cc: Jiri Olsa <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
Add a cleanup function that will still clean up if the script is
terminated prematurely.
Signed-off-by: Adrian Hunter <[email protected]>
Acked-by: Namhyung Kim <[email protected]>
Cc: Ian Rogers <[email protected]>
Cc: Jiri Olsa <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
The perf probe related tests like probe_vfs_getname.sh which
is in "tools/perf/tests/shell" directory have dependency on
debuginfo information in the kernel. Currently debuginfo
check is handled by skip_if_no_debuginfo function in the
file "lib/probe_vfs_getname.sh". skip_if_no_debuginfo function
looks for this specific error log from perf probe to skip
the testcase:
<<>>
Failed to find the path for the kernel|Debuginfo-analysis is
not supported
<>>
But in some case, like this one in powerpc, while running this
test, observed error logs is:
<<>>
The /lib/modules/<version>/build/vmlinux file has no debug information.
Rebuild with CONFIG_DEBUG_INFO=y, or install an appropriate debuginfo
package.
Error: Failed to add events.
<<>>
Update the skip_if_no_debuginfo function to include the above
error, to skip the test in these scenarios too.
Reported-by: Disha Goel <[email protected]>
Signed-off-by: Athira Jajeev <[email protected]>
Tested-by: Disha Goel <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Madhavan Srinivasan <[email protected]>
Cc: Michael Ellerman <[email protected]>
Cc: Nageswara R Sastry <[email protected]>
Cc: [email protected]
Link: https://lore.kernel.org/r/[email protected]
Reviewed-By: Kajol Jain <[email protected]>
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
Handle 'f' key to toggle the display offset and full address. Obviously
it only works when users set to see disassembler output ('o' key). It'd
be useful when users want to see the full virtual address in the TUI
annotate browser.
Signed-off-by: Namhyung Kim <[email protected]>
Acked-by: Ian Rogers <[email protected]>
Cc: Adrian Hunter <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Stephane Eranian <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
Sometimes users want to see actual (virtual) address of sampled instructions.
Add a new 'addr' sort key to display the raw addresses.
$ perf record -o- true | perf report -i- -s addr
# To display the perf.data header info, please use --header/--header-only options.
#
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.000 MB - ]
#
# Total Lost Samples: 0
#
# Samples: 12 of event 'cycles:u'
# Event count (approx.): 252512
#
# Overhead Address
# ........ ..................
#
42.96% 0x7f96f08443d7
29.55% 0x7f96f0859b50
14.76% 0x7f96f0852e02
8.30% 0x7f96f0855028
4.43% 0xffffffff8de01087
Note that it just compares and displays the sample ip. Each process can
have a different memory layout and the ip will be different even if they run
the same binary. So this sort key is mostly meaningful for per-process
profile data.
Signed-off-by: Namhyung Kim <[email protected]>
Acked-by: Ian Rogers <[email protected]>
Cc: Adrian Hunter <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Stephane Eranian <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
Update the documentation of --build-id and --buildid-all options to
clarify the difference between them. The former requires full sample
processing to find which DSOs are actually used. While the latter simply
injects every DSO's build-id from MMAP{,2} records, skipping SAMPLEs.
Reviewed-by: Adrian Hunter <[email protected]>
Signed-off-by: Namhyung Kim <[email protected]>
Cc: Ian Rogers <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Stephane Eranian <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
When it fails to open events record__open() returns without setting the
session->evlist. Then it gets a segfault in the function trying to read
lost sample counts. You can easily reproduce it as a normal user like:
$ perf record -p 1 true
...
perf: Segmentation fault
...
Skip the function if it has no evlist. And add more protection for evsels
which are not properly initialized.
Fixes: a49aa8a54e861af1 ("perf record: Read and inject LOST_SAMPLES events")
Signed-off-by: Namhyung Kim <[email protected]>
Tested-by: Arnaldo Carvalho de Melo <[email protected]>
Acked-by: Leo Yan <[email protected]>
Cc: Adrian Hunter <[email protected]>
Cc: Ian Rogers <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Stephane Eranian <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
There are three error paths which return success:
1. Propagate the errno from evlist__create_maps() if it failed.
2. Return -EINVAL if top.sb_evlist is NULL.
3. Return -EINVAL if evlist__add_bpf_sb_event() failed.
Signed-off-by: Shang XiaoJing <[email protected]>
Cc: Alexander Shishkin <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Mark Rutland <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
As two cases in process_evlist has same behavior, make the first fall
through to the second.
Commiter notes:
Added __fallthrough, the kernel has "fallthrough", we need to make
tools/ use it.
Signed-off-by: Shang XiaoJing <[email protected]>
Cc: Alexander Shishkin <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Mark Rutland <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
The error code is set to -1 at the beginning of jit_write_elf(), but it is
assigned by jit_add_eh_frame_info() in the middle, hence the following
error can only return the error code of jit_add_eh_frame_info(). Reset
the error code to the default value after being assigned by
jit_add_eh_frame_info().
Fixes: 086f9f3d7897d808 ("perf jit: Generate .eh_frame/.eh_frame_hdr in DSO")
Signed-off-by: Shang XiaoJing <[email protected]>
Cc: Alexander Shishkin <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Mark Rutland <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Stefano Sanfilippo <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
Currently it collects stack traces to max size then skip entries.
Because we don't have control how to skip perf callchains. But BPF can
do it with bpf_get_stackid() with a flag.
Say we have max-stack=4 and stack-skip=2, we get these stack traces.
Before: After:
.---> +---+ <--. .---> +---+ <--.
| | | | | | | |
| +---+ usable | +---+ |
max | | | max | | |
stack +---+ <--' stack +---+ usable
| | X | | | | |
| +---+ skip | +---+ |
| | X | | | | |
`---> +---+ `---> +---+ <--' <=== collection
| X |
+---+ skip
| X |
+---+
Signed-off-by: Namhyung Kim <[email protected]>
Cc: Adrian Hunter <[email protected]>
Cc: Ian Rogers <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Song Liu <[email protected]>
Cc: [email protected]
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
It needs stack traces to find callers of locks. To minimize the
performance overhead it only collects up to 8 entries for each stack
trace. And it skips first 3 entries as they came from BPF, tracepoint
and lock functions which are not interested for most users.
But it turned out that those numbers are different in some
configuration. Using fixed number can result in non meaningful caller
names. Let's make them adjustable with --stack-depth and --skip-stack
options.
On my setup, the default output is like below:
# /perf lock con -ab -F contended,wait_total sleep 3
contended total wait type caller
28 4.55 ms rwlock:W __bpf_trace_contention_begin+0xb
33 1.67 ms rwlock:W __bpf_trace_contention_begin+0xb
12 580.28 us spinlock __bpf_trace_contention_begin+0xb
60 240.54 us rwsem:R __bpf_trace_contention_begin+0xb
27 64.45 us spinlock __bpf_trace_contention_begin+0xb
If I change the stack skip to 5, the result will be like:
# perf lock con -ab -F contended,wait_total --stack-skip 5 sleep 3
contended total wait type caller
32 715.45 us spinlock folio_lruvec_lock_irqsave+0x61
26 550.22 us spinlock folio_lruvec_lock_irqsave+0x61
15 486.93 us rwsem:R mmap_read_lock+0x13
12 139.66 us rwsem:W vm_mmap_pgoff+0x93
1 7.04 us spinlock tick_do_update_jiffies64+0x25
Signed-off-by: Namhyung Kim <[email protected]>
Cc: Adrian Hunter <[email protected]>
Cc: Ian Rogers <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Song Liu <[email protected]>
Cc: [email protected]
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
Currently it shows a caller function for each entry, but users need to see
the full call stacks sometimes. Use -v/--verbose option to do that.
# perf lock con -a -b -v sleep 3
Looking at the vmlinux_path (8 entries long)
symsrc__init: cannot get elf header.
Using /proc/kcore for kernel data
Using /proc/kallsyms for symbols
contended total wait max wait avg wait type caller
1 10.74 us 10.74 us 10.74 us spinlock __bpf_trace_contention_begin+0xb
0xffffffffc03b5c47 bpf_prog_bf07ae9e2cbd02c5_contention_begin+0x117
0xffffffffc03b5c47 bpf_prog_bf07ae9e2cbd02c5_contention_begin+0x117
0xffffffffbb8b8e75 bpf_trace_run2+0x35
0xffffffffbb7eab9b __bpf_trace_contention_begin+0xb
0xffffffffbb7ebe75 queued_spin_lock_slowpath+0x1f5
0xffffffffbc1c26ff _raw_spin_lock+0x1f
0xffffffffbb841015 tick_do_update_jiffies64+0x25
0xffffffffbb8409ee tick_irq_enter+0x9e
1 7.70 us 7.70 us 7.70 us spinlock __bpf_trace_contention_begin+0xb
0xffffffffc03b5c47 bpf_prog_bf07ae9e2cbd02c5_contention_begin+0x117
0xffffffffc03b5c47 bpf_prog_bf07ae9e2cbd02c5_contention_begin+0x117
0xffffffffbb8b8e75 bpf_trace_run2+0x35
0xffffffffbb7eab9b __bpf_trace_contention_begin+0xb
0xffffffffbb7ebe75 queued_spin_lock_slowpath+0x1f5
0xffffffffbc1c26ff _raw_spin_lock+0x1f
0xffffffffbb7bc27e raw_spin_rq_lock_nested+0xe
0xffffffffbb7cef9c load_balance+0x66c
Signed-off-by: Namhyung Kim <[email protected]>
Cc: Adrian Hunter <[email protected]>
Cc: Ian Rogers <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Song Liu <[email protected]>
Cc: [email protected]
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
It's to convert addr to symbol+offset.
Signed-off-by: Namhyung Kim <[email protected]>
Cc: Adrian Hunter <[email protected]>
Cc: Ian Rogers <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Song Liu <[email protected]>
Cc: [email protected]
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
Add basic test for coverage, similar to #smt_on.
Signed-off-by: Ian Rogers <[email protected]>
Cc: Ahmad Yasin <[email protected]>
Cc: Alexander Shishkin <[email protected]>
Cc: Andi Kleen <[email protected]>
Cc: Caleb Biggers <[email protected]>
Cc: Florian Fischer <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: James Clark <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: John Garry <[email protected]>
Cc: Kan Liang <[email protected]>
Cc: Kshipra Bopardikar <[email protected]>
Cc: Mark Rutland <[email protected]>
Cc: Miaoqian Lin <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Perry Taylor <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Stephane Eranian <[email protected]>
Cc: Thomas Richter <[email protected]>
Cc: Xing Zhengjun <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
Pass state necessary for core_wide into the expression parser. Add
system_wide and user_requested_cpu_list to perf_stat_config to make it
available at display time. evlist isn't used as the
evlist__create_maps, that computes user_requested_cpus, needs the list
of events which is generated by the metric.
Signed-off-by: Ian Rogers <[email protected]>
Cc: Ahmad Yasin <[email protected]>
Cc: Alexander Shishkin <[email protected]>
Cc: Andi Kleen <[email protected]>
Cc: Caleb Biggers <[email protected]>
Cc: Florian Fischer <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: James Clark <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: John Garry <[email protected]>
Cc: Kan Liang <[email protected]>
Cc: Kshipra Bopardikar <[email protected]>
Cc: Mark Rutland <[email protected]>
Cc: Miaoqian Lin <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Perry Taylor <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Stephane Eranian <[email protected]>
Cc: Thomas Richter <[email protected]>
Cc: Xing Zhengjun <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
Having metric parsing as part of argument processing causes issues as
flags like metric-no-group may be specified later. It also denies the
opportunity to optimize the events on SMT systems where fewer events
may be possible if we know the target is system-wide. Move metric
parsing to after command line option parsing. Because of how stat runs
this moves the parsing after record/report which fail to work with
metrics currently anyway.
Signed-off-by: Ian Rogers <[email protected]>
Cc: Ahmad Yasin <[email protected]>
Cc: Alexander Shishkin <[email protected]>
Cc: Andi Kleen <[email protected]>
Cc: Caleb Biggers <[email protected]>
Cc: Florian Fischer <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: James Clark <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: John Garry <[email protected]>
Cc: Kan Liang <[email protected]>
Cc: Kshipra Bopardikar <[email protected]>
Cc: Mark Rutland <[email protected]>
Cc: Miaoqian Lin <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Perry Taylor <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Stephane Eranian <[email protected]>
Cc: Thomas Richter <[email protected]>
Cc: Xing Zhengjun <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
It is possible to optimize metrics when all SMT threads (CPUs) on a
core are measuring events in system wide mode. For example, TMA
metrics defines CORE_CLKS for Sandybrdige as:
if SMT is disabled:
CPU_CLK_UNHALTED.THREAD
if SMT is enabled and recording on all SMT threads:
CPU_CLK_UNHALTED.THREAD_ANY / 2
if SMT is enabled and not recording on all SMT threads:
(CPU_CLK_UNHALTED.THREAD/2)*
(1+CPU_CLK_UNHALTED.ONE_THREAD_ACTIVE/CPU_CLK_UNHALTED.REF_XCLK )
That is two more events are necessary when not gathering counts on all
SMT threads. To distinguish all SMT threads on a core vs system wide
(all CPUs) call the new property core wide. Add a core wide test that
determines the property from user requested CPUs, the topology and
system wide. System wide is required as other processes running on a
SMT thread will change the counts.
Signed-off-by: Ian Rogers <[email protected]>
Cc: Ahmad Yasin <[email protected]>
Cc: Alexander Shishkin <[email protected]>
Cc: Andi Kleen <[email protected]>
Cc: Caleb Biggers <[email protected]>
Cc: Florian Fischer <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: James Clark <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: John Garry <[email protected]>
Cc: Kan Liang <[email protected]>
Cc: Kshipra Bopardikar <[email protected]>
Cc: Mark Rutland <[email protected]>
Cc: Miaoqian Lin <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Perry Taylor <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Stephane Eranian <[email protected]>
Cc: Thomas Richter <[email protected]>
Cc: Xing Zhengjun <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
The topology records sibling threads. Rather than computing SMT using
siblings in sysfs, reuse the values in topology. This only applies
when the file smt/active isn't available.
Signed-off-by: Ian Rogers <[email protected]>
Cc: Ahmad Yasin <[email protected]>
Cc: Alexander Shishkin <[email protected]>
Cc: Andi Kleen <[email protected]>
Cc: Caleb Biggers <[email protected]>
Cc: Florian Fischer <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: James Clark <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: John Garry <[email protected]>
Cc: Kan Liang <[email protected]>
Cc: Kshipra Bopardikar <[email protected]>
Cc: Mark Rutland <[email protected]>
Cc: Miaoqian Lin <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Perry Taylor <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Stephane Eranian <[email protected]>
Cc: Thomas Richter <[email protected]>
Cc: Xing Zhengjun <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
We currently maintain the two independently and copy from one to the
other. This is a burden when additional scanner context values are
necessary, so combine them.
Signed-off-by: Ian Rogers <[email protected]>
Cc: Ahmad Yasin <[email protected]>
Cc: Alexander Shishkin <[email protected]>
Cc: Andi Kleen <[email protected]>
Cc: Caleb Biggers <[email protected]>
Cc: Florian Fischer <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: James Clark <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: John Garry <[email protected]>
Cc: Kan Liang <[email protected]>
Cc: Kshipra Bopardikar <[email protected]>
Cc: Mark Rutland <[email protected]>
Cc: Miaoqian Lin <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Perry Taylor <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Stephane Eranian <[email protected]>
Cc: Thomas Richter <[email protected]>
Cc: Xing Zhengjun <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
It builds without it, perhaps with some older combination of flex/bison
we needed this, clean it up a bit removing this.
Signed-off-by: Gaosheng Cui <[email protected]>
Cc: Alexander Shishkin <[email protected]>
Cc: Athira Jajeev <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: James Clark <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Mark Rutland <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Stephane Eranian <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
leftover declarations
The hist_entry__sort_list and sort__first_dimension functions have been
removed in commit cfaa154b2335d4c8 ("perf tools: Get rid of obsolete
hist_entry__sort_list"), remove them.
Signed-off-by: Gaosheng Cui <[email protected]>
Cc: Alexander Shishkin <[email protected]>
Cc: Athira Jajeev <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Mark Rutland <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Stephane Eranian <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
If it runs on an old kernel, perf_event_open would fail because of the
new fields sigtrap and sig_data. Just skipping the test could miss an
actual bug in the kernel.
Let's check BTF (when we have libbpf) if it has the sigtrap field in the
perf_event_attr. Otherwise, we can check it with a minimal event config.
Signed-off-by: Namhyung Kim <[email protected]>
Acked-by: Song Liu <[email protected]>
Suggested-by: Arnaldo Carvalho de Melo <[email protected]> # Using BTF to check for the struct members
Cc: Adrian Hunter <[email protected]>
Cc: Ian Rogers <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Marco Elver <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
Add destroy_tasks() as a counterpart of create_tasks() and put the
thread safety notations there. After join, it destroys semaphores too.
Signed-off-by: Namhyung Kim <[email protected]>
Cc: Adrian Hunter <[email protected]>
Cc: Ian Rogers <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|