| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Some metric groups have metric constraints. A metric group can be
scheduled as a group only when some constraints are applied. For
example, Page_Walks_Utilization has a metric constraint,
"NO_NMI_WATCHDOG".
When NMI watchdog is disabled, the metric group can be scheduled as a
group. Otherwise, splitting the metric group into standalone metrics.
Add a new function, metricgroup__has_constraint(), to check whether all
constraints are applied. If not, splitting the metric group into
standalone metrics.
Currently, only one constraint, "NO_NMI_WATCHDOG", is checked. Print a
warning for the metric group with the constraint, when NMI WATCHDOG is
enabled.
Signed-off-by: Kan Liang <[email protected]>
Acked-by: Jiri Olsa <[email protected]>
Cc: Andi Kleen <[email protected]>
Cc: Jin Yao <[email protected]>
Cc: Mark Rutland <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Ravi Bangoria <[email protected]>
Link: http://lore.kernel.org/lkml/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
The NMI watchdog status is required for metric group constraint
examination. Factor out sysctl__nmi_watchdog_enabled() to retrieve the
NMI watchdog status.
Users may count more than one metric group each time. If so, the NMI
watchdog status may be retrieved several times. To reduce the overhead,
cache the NMI watchdog status.
Replace the NMI watchdog status checking in print_footer() by
sysctl__nmi_watchdog_enabled().
Suggested-by: Andi Kleen <[email protected]>
Signed-off-by: Kan Liang <[email protected]>
Acked-by: Jiri Olsa <[email protected]>
Cc: Andi Kleen <[email protected]>
Cc: Jin Yao <[email protected]>
Cc: Mark Rutland <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Ravi Bangoria <[email protected]>
Link: http://lore.kernel.org/lkml/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
Factor out metricgroup__add_metric_weak_group() which add metrics into a
weak group. The change can improve code readability. Because following
patch will introduce a function which add standalone metrics.
Signed-off-by: Kan Liang <[email protected]>
Acked-by: Jiri Olsa <[email protected]>
Cc: Andi Kleen <[email protected]>
Cc: Jin Yao <[email protected]>
Cc: Mark Rutland <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Ravi Bangoria <[email protected]>
Link: http://lore.kernel.org/lkml/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
A new field "MetricConstraint" is introduced in JSON event list.
Extend jevents to parse the field and save the value in
metric_constraint.
Signed-off-by: Kan Liang <[email protected]>
Acked-by: Jiri Olsa <[email protected]>
Cc: Andi Kleen <[email protected]>
Cc: Jin Yao <[email protected]>
Cc: Mark Rutland <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Ravi Bangoria <[email protected]>
Link: http://lore.kernel.org/lkml/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
Add a simple test to the existing selftest program in order to make
sure that a packed enum member in struct unexceeds the struct_size.
Signed-off-by: Yoshiki Komachi <[email protected]>
Signed-off-by: Alexei Starovoitov <[email protected]>
Link: https://lore.kernel.org/bpf/[email protected]
|
|
Add support for new deflate counters:
- Counter 247: cycles CPU spent obtaining access to Deflate unit
- Counter 252: cycles CPU is using Deflate unit
- Counter 264: Increments by one for every DEFLATE CONVERSION CALL
instruction executed.
- Counter 265: Increments by one for every DEFLATE CONVERSION CALL
instruction executed that ended in Condition Codes
0, 1 or 2.
Also adjust the some crypto counter description to latest documentation.
Signed-off-by: Thomas Richter <[email protected]>
Reviewed-by: Sumanth Korikkar <[email protected]>
Cc: Heiko Carstens <[email protected]>
Cc: Vasily Gorbik <[email protected]>
Link: http://lore.kernel.org/lkml/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux
Pull cpupower utility fix for v5.6 from Shuah Khan:
"This cpupower update for Linux 5.6-rc6 consists of a fix from
Mike Gilbert for build failures when -fno-common is enabled.
-fno-common will be default in gcc v10."
* tag 'linux-cpupower-5.6-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux:
cpupower: avoid multiple definition with gcc -fno-common
|
|
allows to run the tests with fixed receive buffer by passing
"-R <value>" to mptcp_connect.sh.
While at it, add a default 10 second poll timeout so the "-t"
becomes optional -- this makes mptcp_connect simpler to use
during manual testing.
Signed-off-by: Florian Westphal <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
It would be nice to print the block percents with colors.
This patch supports the 'Sampled Cycles%' and 'Avg Cycles%' printed in
colors.
For example,
perf record -b ...
perf report --total-cycles or perf report --total-cycles --stdio
percent > 5%, colored in red
percent > 0.5%, colored in green
percent < 0.5%, default color
Signed-off-by: Jin Yao <[email protected]>
Tested-by: Arnaldo Carvalho de Melo <[email protected]>
Cc: Alexander Shishkin <[email protected]>
Cc: Andi Kleen <[email protected]>
Cc: Jin Yao <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Kan Liang <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Link: http://lore.kernel.org/lkml/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
Currently we use a predefined array to set the block info output
formats, it's fixed and inflexible.
This patch adds two parameters "block_hpps" and "nr_hpps" in
block_info__create_report and other static functions, in order to let
user decide which columns to report and with specified report ordering.
It should be more flexible.
Buffers will be allocated to contain the new fmts, of course, we need to
release them before perf exits.
Signed-off-by: Jin Yao <[email protected]>
Cc: Alexander Shishkin <[email protected]>
Cc: Andi Kleen <[email protected]>
Cc: Jin Yao <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Kan Liang <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Link: http://lore.kernel.org/lkml/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
'perf diff' uses block_pair_cmp() to compare two blocks. But
block_info__cmp() has the similar functionality and it's a bit more
complete.
This patch removes block_pair_cmp() and uses __block_info__cmp()
instead. __block_info__cmp() is wrapped by block_info__cmp() and it
doesn't receives a perf_hpp_fmt parameter.
Signed-off-by: Jin Yao <[email protected]>
Cc: Alexander Shishkin <[email protected]>
Cc: Andi Kleen <[email protected]>
Cc: Jin Yao <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Kan Liang <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Link: http://lore.kernel.org/lkml/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
Commit 6041441870ab ("perf block: Cleanup and refactor block info
functions") introduces block_info__cmp(), which compares two blocks.
But the issues are:
1. It should return the strcmp cmp value only if it's not 0.
2. When symbol names are matched, we need to compare the addresses
of blocks further. But it wrongly uses the symbol addresses for
comparison.
3. If the syms are both NULL, we can't consider these two blocks are
matched.
This patch fixes above 3 issues.
Fixes: 6041441870ab ("perf block: Cleanup and refactor block info functions")
Signed-off-by: Jin Yao <[email protected]>
Cc: Alexander Shishkin <[email protected]>
Cc: Andi Kleen <[email protected]>
Cc: Jin Yao <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Kan Liang <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Link: http://lore.kernel.org/lkml/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
To match the error value of the expr__find_other function, so all
exported expr functions return the same values:
0 on success, -1 on error.
Signed-off-by: Jiri Olsa <[email protected]>
Reviewed-by: Andi Kleen <[email protected]>
Cc: Alexander Shishkin <[email protected]>
Cc: John Garry <[email protected]>
Cc: Kajol Jain <[email protected]>
Cc: Michael Petlan <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Ravi Bangoria <[email protected]>
Link: http://lore.kernel.org/lkml/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
Now that we have a flex parser we don't need to update the parsed string
pointer, so the interface can just be passed the pointer to the
expression instead of a pointer to pointer.
Signed-off-by: Jiri Olsa <[email protected]>
Reviewed-by: Andi Kleen <[email protected]>
Cc: Alexander Shishkin <[email protected]>
Cc: John Garry <[email protected]>
Cc: Kajol Jain <[email protected]>
Cc: Michael Petlan <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Ravi Bangoria <[email protected]>
Link: http://lore.kernel.org/lkml/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
variables
We have metrics that define more than 15 variables, like
Branch_Misprediction_Cost. Increasing the allowed variables count to 20.
As Andy pointed out, we can't go too high in here, because some of the
code has O(n^2) complexity (already_seen) and we might want to do some
other changes (like using hash tables) before increasing the maximum
even more.
Signed-off-by: Jiri Olsa <[email protected]>
Reviewed-by: Andi Kleen <[email protected]>
Cc: Alexander Shishkin <[email protected]>
Cc: John Garry <[email protected]>
Cc: Kajol Jain <[email protected]>
Cc: Michael Petlan <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Ravi Bangoria <[email protected]>
Link: http://lore.kernel.org/lkml/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
Adding expr flex code instead of the manual parser code. So it's easily
extensible in upcoming changes.
The new flex code is in flex.l object and gets compiled like all the
other flexers we use. It's defined as flex reentrant parser.
It's used by both expr__parse and expr__find_other interfaces by
separating the starting point.
There's no intended change of functionality ;-) the test expr is
passing.
Signed-off-by: Jiri Olsa <[email protected]>
Reviewed-by: Andi Kleen <[email protected]>
Cc: Alexander Shishkin <[email protected]>
Cc: John Garry <[email protected]>
Cc: Kajol Jain <[email protected]>
Cc: Michael Petlan <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Ravi Bangoria <[email protected]>
Link: http://lore.kernel.org/lkml/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
Add generic expr code into new expr.c object.
The expr.c object will be mainly used in following change that will get
rid of the manual flex code,
Signed-off-by: Jiri Olsa <[email protected]>
Reviewed-by: Andi Kleen <[email protected]>
Cc: Alexander Shishkin <[email protected]>
Cc: John Garry <[email protected]>
Cc: Kajol Jain <[email protected]>
Cc: Michael Petlan <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Ravi Bangoria <[email protected]>
Link: http://lore.kernel.org/lkml/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
The perf.data may be generated by a newer version of perf tool, which
support new input bits in attr, e.g. new bit for branch_sample_type.
The perf.data may be parsed by an older version of perf tool later. The
old perf tool may parse the perf.data incorrectly. There is no warning
message for this case.
Current perf header never check for unknown input bits in attr.
When read the event desc from header, check the stored event attr. The
reserved bits, sample type, read format and branch sample type will be
checked.
Signed-off-by: Kan Liang <[email protected]>
Cc: Adrian Hunter <[email protected]>
Cc: Alexey Budankov <[email protected]>
Cc: Andi Kleen <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Mathieu Poirier <[email protected]>
Cc: Michael Ellerman <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Pavel Gerasimov <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Ravi Bangoria <[email protected]>
Cc: Stephane Eranian <[email protected]>
Cc: Vitaly Slobodskoy <[email protected]>
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
A new branch sample type PERF_SAMPLE_BRANCH_HW_INDEX has been introduced
in latest kernel.
Enable HW_INDEX by default in LBR call stack mode.
If kernel doesn't support the sample type, switching it off.
Add HW_INDEX in attr_fprintf as well. User can check whether the branch
sample type is set via debug information or header.
Committer testing:
First collect some samples with LBR callchains, system wide, for a few
seconds:
# perf record --call-graph lbr -a sleep 5
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.625 MB perf.data (224 samples) ]
#
Now lets use 'perf evlist -v' to look at the branch_sample_type:
# perf evlist -v
cycles: size: 120, { sample_period, sample_freq }: 4000, sample_type: IP|TID|TIME|CALLCHAIN|CPU|PERIOD|BRANCH_STACK, read_format: ID, disabled: 1, inherit: 1, mmap: 1, comm: 1, freq: 1, task: 1, precise_ip: 3, sample_id_all: 1, exclude_guest: 1, mmap2: 1, comm_exec: 1, ksymbol: 1, bpf_event: 1, branch_sample_type: USER|CALL_STACK|NO_FLAGS|NO_CYCLES|HW_INDEX
#
So the machine has the kernel feature, and it was correctly added to
perf_event_attr.branch_sample_type, for the default 'cycles' event.
If we do it in another machine, where the kernel lacks the HW_INDEX
feature, we get:
# perf record --call-graph lbr -a sleep 2s
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 1.690 MB perf.data (499 samples) ]
# perf evlist -v
cycles: size: 120, { sample_period, sample_freq }: 4000, sample_type: IP|TID|TIME|CALLCHAIN|CPU|PERIOD|BRANCH_STACK, read_format: ID, disabled: 1, inherit: 1, mmap: 1, comm: 1, freq: 1, task: 1, precise_ip: 3, sample_id_all: 1, exclude_guest: 1, mmap2: 1, comm_exec: 1, ksymbol: 1, bpf_event: 1, branch_sample_type: USER|CALL_STACK|NO_FLAGS|NO_CYCLES
#
No HW_INDEX in attr.branch_sample_type.
Signed-off-by: Kan Liang <[email protected]>
Tested-by: Arnaldo Carvalho de Melo <[email protected]>
Cc: Adrian Hunter <[email protected]>
Cc: Alexey Budankov <[email protected]>
Cc: Andi Kleen <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Mathieu Poirier <[email protected]>
Cc: Michael Ellerman <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Pavel Gerasimov <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Ravi Bangoria <[email protected]>
Cc: Stephane Eranian <[email protected]>
Cc: Vitaly Slobodskoy <[email protected]>
Link: http://lore.kernel.org/lkml/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
The low level index of raw branch records for the most recent branch can
be recorded in a sample with PERF_SAMPLE_BRANCH_HW_INDEX
branch_sample_type. Extend struct branch_stack to support it.
However, if the PERF_SAMPLE_BRANCH_HW_INDEX is not applied, only nr and
entries[] will be output by kernel. The pointer of entries[] could be
wrong, since the output format is different with new struct
branch_stack. Add a variable no_hw_idx in struct perf_sample to
indicate whether the hw_idx is output. Add get_branch_entry() to return
corresponding pointer of entries[0].
To make dummy branch sample consistent as new branch sample, add hw_idx
in struct dummy_branch_stack for cs-etm and intel-pt.
Apply the new struct branch_stack for synthetic events as well.
Extend test case sample-parsing to support new struct branch_stack.
Committer notes:
Renamed get_branch_entries() to perf_sample__branch_entries() to have
proper namespacing and pave the way for this to be moved to libperf,
eventually.
Add 'static' to that inline as it is in a header.
Add 'hw_idx' to 'struct dummy_branch_stack' in cs-etm.c to fix the build
on arm64.
Signed-off-by: Kan Liang <[email protected]>
Cc: Adrian Hunter <[email protected]>
Cc: Alexey Budankov <[email protected]>
Cc: Andi Kleen <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Mathieu Poirier <[email protected]>
Cc: Michael Ellerman <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Pavel Gerasimov <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Ravi Bangoria <[email protected]>
Cc: Stephane Eranian <[email protected]>
Cc: Vitaly Slobodskoy <[email protected]>
Link: http://lore.kernel.org/lkml/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-ktest
Pull Ktest fixes and clean ups from Steven Rostedt:
- Make the default option oldconfig instead of randconfig (one too many
times I lost my config because I left the build type out)
- Add timeout to ssh sync to sync before reboot (prevents test hangs)
- A couple of spelling fix patches
* tag 'ktest-v5.6' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-ktest:
ktest: Fix typos in ktest.pl
ktest: Add timeout for ssh sync testing
ktest: Make default build option oldconfig not randconfig
ktest: Fix some typos in sample.conf
|
|
_bpftool_get_map_names => _bpftool_get_prog_names for prog-attach|detach.
Fixes: 99f9863a0c45 ("bpftool: Match maps by name")
Signed-off-by: Song Liu <[email protected]>
Signed-off-by: Daniel Borkmann <[email protected]>
Reviewed-by: Quentin Monnet <[email protected]>
Link: https://lore.kernel.org/bpf/[email protected]
|
|
Add bash completion for "bpftool prog profile" command.
Signed-off-by: Song Liu <[email protected]>
Signed-off-by: Daniel Borkmann <[email protected]>
Reviewed-by: Quentin Monnet <[email protected]>
Link: https://lore.kernel.org/bpf/[email protected]
|
|
Add documentation for the new bpftool prog profile command.
Signed-off-by: Song Liu <[email protected]>
Signed-off-by: Daniel Borkmann <[email protected]>
Reviewed-by: Quentin Monnet <[email protected]>
Link: https://lore.kernel.org/bpf/[email protected]
|
|
With fentry/fexit programs, it is possible to profile BPF program with
hardware counters. Introduce bpftool "prog profile", which measures key
metrics of a BPF program.
bpftool prog profile command creates per-cpu perf events. Then it attaches
fentry/fexit programs to the target BPF program. The fentry program saves
perf event value to a map. The fexit program reads the perf event again,
and calculates the difference, which is the instructions/cycles used by
the target program.
Example input and output:
./bpftool prog profile id 337 duration 3 cycles instructions llc_misses
4228 run_cnt
3403698 cycles (84.08%)
3525294 instructions # 1.04 insn per cycle (84.05%)
13 llc_misses # 3.69 LLC misses per million isns (83.50%)
This command measures cycles and instructions for BPF program with id
337 for 3 seconds. The program has triggered 4228 times. The rest of the
output is similar to perf-stat. In this example, the counters were only
counting ~84% of the time because of time multiplexing of perf counters.
Note that, this approach measures cycles and instructions in very small
increments. So the fentry/fexit programs introduce noticeable errors to
the measurement results.
The fentry/fexit programs are generated with BPF skeletons. Therefore, we
build bpftool twice. The first time _bpftool is built without skeletons.
Then, _bpftool is used to generate the skeletons. The second time, bpftool
is built with skeletons.
Signed-off-by: Song Liu <[email protected]>
Signed-off-by: Daniel Borkmann <[email protected]>
Reviewed-by: Quentin Monnet <[email protected]>
Acked-by: Yonghong Song <[email protected]>
Link: https://lore.kernel.org/bpf/[email protected]
|
|
Remove the guard that disables UDP tests now that sockmap
has support for them.
Signed-off-by: Lorenz Bauer <[email protected]>
Signed-off-by: Daniel Borkmann <[email protected]>
Reviewed-by: Jakub Sitnicki <[email protected]>
Acked-by: John Fastabend <[email protected]>
Link: https://lore.kernel.org/bpf/[email protected]
|
|
Expand the TCP sockmap test suite to also check UDP sockets.
Signed-off-by: Jakub Sitnicki <[email protected]>
Signed-off-by: Lorenz Bauer <[email protected]>
Signed-off-by: Daniel Borkmann <[email protected]>
Acked-by: John Fastabend <[email protected]>
Link: https://lore.kernel.org/bpf/[email protected]
|
|
Most tests for TCP sockmap can be adapted to UDP sockmap if the
listen call is skipped. Rename listen_loopback, etc. to socket_loopback
and skip listen() for SOCK_DGRAM.
Signed-off-by: Lorenz Bauer <[email protected]>
Signed-off-by: Daniel Borkmann <[email protected]>
Reviewed-by: Jakub Sitnicki <[email protected]>
Acked-by: John Fastabend <[email protected]>
Link: https://lore.kernel.org/bpf/[email protected]
|
|
This patch fixes multipe spelling typo found in ktest.pl.
Link: http://lkml.kernel.org/r/[email protected]
Acked-by: Randy Dunlap <[email protected]>
Signed-off-by: Masanari Iida <[email protected]>
Signed-off-by: Steven Rostedt (VMware) <[email protected]>
|
|
Before rebooting the box, a "ssh sync" is called to the test machine to see
if it is alive or not. But if the test machine is in a partial state, that
ssh may never actually finish, and the ktest test hangs.
Add a 10 second timeout to the sync test, which will fail after 10 seconds
and then cause the test to reboot the test machine.
Cc: [email protected]
Fixes: 6474ace999edd ("ktest.pl: Powercycle the box on reboot if no connection can be made")
Signed-off-by: Steven Rostedt (VMware) <[email protected]>
|
|
For the last time, I screwed up my ktest config file, and the build went
into the default "randconfig", blowing away the .config that I had set up.
The reason for the default randconfig was because when this was first
written, I wanted to do a bunch of randconfigs. But as time progressed,
ktest isn't about randconfig anymore, and because randconfig destroys the
config in the build directory, it's a dangerous default to have. Use
oldconfig as the default.
Signed-off-by: Steven Rostedt (VMware) <[email protected]>
|
|
This patch fixes some spelling typo in sample.conf
Link: http://lkml.kernel.org/r/[email protected]
Acked-by: Randy Dunlap <[email protected]>
Signed-off-by: Masanari Iida <[email protected]>
Signed-off-by: Steven Rostedt (VMware) <[email protected]>
|
|
Do not depend on dwfl_module_addrsym() because it can fail on user-space
shared libraries.
Actually, same bug was fixed by commit 664fee3dc379 ("perf probe: Do not
use dwfl_module_addrsym if dwarf_diename finds symbol name"), but commit
07d369857808 ("perf probe: Fix wrong address verification) reverted to
get actual symbol address from symtab.
This fixes it again by getting symbol address from DIE, and only if the
DIE has only address range, it uses dwfl_module_addrsym().
Fixes: 07d369857808 ("perf probe: Fix wrong address verification)
Reported-by: Alexandre Ghiti <[email protected]>
Signed-off-by: Masami Hiramatsu <[email protected]>
Tested-by: Alexandre Ghiti <[email protected]>
Cc: Alexander Shishkin <[email protected]>
Cc: Greg Kroah-Hartman <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Sasha Levin <[email protected]>
Link: http://lore.kernel.org/lkml/158281812176.476.14164573830975116234.stgit@devnote2
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
When we put an event with multiple probes, perf-probe fails to delete
with filters. This comes from a failure to list up the event name
because of overwrapping its name.
To fix this issue, skip to list up the event which has same name.
Without this patch:
# perf probe -l \*
probe_perf:map__map_ip (on perf_sample__fprintf_brstackoff:21@
probe_perf:map__map_ip (on perf_sample__fprintf_brstackoff:25@
probe_perf:map__map_ip (on append_inlines:12@util/machine.c in
probe_perf:map__map_ip (on unwind_entry:19@util/machine.c in /
probe_perf:map__map_ip (on map__map_ip@util/map.h in /home/mhi
probe_perf:map__map_ip (on map__map_ip@util/map.h in /home/mhi
# perf probe -d \*
"*" does not hit any event.
Error: Failed to delete events. Reason: No such file or directory (Code: -2)
With it:
# perf probe -d \*
Removed event: probe_perf:map__map_ip
#
Fixes: 72363540c009 ("perf probe: Support multiprobe event")
Reported-by: Arnaldo Carvalho de Melo <[email protected]>
Reported-by: He Zhe <[email protected]>
Signed-off-by: Masami Hiramatsu <[email protected]>
Tested-by: Arnaldo Carvalho de Melo <[email protected]>
Cc: Adrian Hunter <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: [email protected]
Link: http://lore.kernel.org/lkml/158287666197.16697.7514373548551863562.stgit@devnote2
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
ADD_CONFIG_TERM accesses term->weak, however, in get_config_chgs this
value is accessed outside of the list_for_each_entry and references
invalid memory. Add an argument for ADD_CONFIG_TERM for weak and set it
to false in the get_config_chgs case.
This bug was cause by clang's address sanitizer and libfuzzer. It can be
reproduced with a command line of:
perf stat -a -e i/bs,tsc,L2/o
Signed-off-by: Ian Rogers <[email protected]>
Acked-by: Jiri Olsa <[email protected]>
Cc: Adrian Hunter <[email protected]>
Cc: Alexander Shishkin <[email protected]>
Cc: Andi Kleen <[email protected]>
Cc: Leo Yan <[email protected]>
Cc: Mark Rutland <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Stephane Eranian <[email protected]>
Cc: [email protected]
Link: http://lore.kernel.org/lkml/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
Currently, the setup.py script detects the clang compiler only when invoked
with CC=clang. But when using a specific version (e.g. CC=clang-11), this
doesn't work correctly and wrong compiler flags are set, leading to build
errors.
To properly detect clang, invoke the compiler with -v and check the output.
The first line should start with "clang version ...".
Committer testing:
$ make CC=clang-9 O=/tmp/build/perf -C tools/perf install-bin
<SNIP>
$ readelf -wi /tmp/build/perf/python/perf.cpython-37m-x86_64-linux-gnu.so | grep DW_AT_producer | head -1
<c> DW_AT_producer : (indirect string, offset: 0x0): clang version 9.0.1 (Fedora 9.0.1-2.fc31) /usr/bin/clang-9 -Wno-unused-result -Wsign-compare -D DYNAMIC_ANNOTATIONS_ENABLED=1 -D NDEBUG -O2 -g -pipe -Wall -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -Wp,-D_GLIBCXX_ASSERTIONS -fexceptions -fstack-protector-strong -grecord-command-line -m64 -mtune=generic -fasynchronous-unwind-tables -fcf-protection=full -D _GNU_SOURCE -fPIC -fwrapv -Wbad-function-cast -Wdeclaration-after-statement -Wformat-security -Wformat-y2k -Winit-self -Wmissing-declarations -Wmissing-prototypes -Wnested-externs -Wno-system-headers -Wold-style-definition -Wpacked -Wredundant-decls -Wstrict-prototypes -Wswitch-default -Wswitch-enum -Wundef -Wwrite-strings -Wformat -Wshadow -D HAVE_ARCH_X86_64_SUPPORT -I /tmp/build/perf/arch/x86/include/generated -D HAVE_SYSCALL_TABLE_SUPPORT -D HAVE_PERF_REGS_SUPPORT -D HAVE_ARCH_REGS_QUERY_REGISTER_OFFSET -Werror -O3 -fno-omit-frame-pointer -ggdb3 -funwind-tables -Wall -Wextra -std=gnu99 -fstack-protector-all -D _FORTIFY_SOURCE=2 -D _LARGEFILE64_SOURCE -D _FILE_OFFSET_BITS=64 -D _GNU_SOURCE -I /home/acme/git/perf/tools/lib/perf/include -I /home/acme/git/perf/tools/perf/util/include -I /home/acme/git/perf/tools/perf/arch/x86/include -I /home/acme/git/perf/tools/include/ -I /home/acme/git/perf/tools/arch/x86/include/uapi -I /home/acme/git/perf/tools/include/uapi -I /home/acme/git/perf/tools/arch/x86/include/ -I /home/acme/git/perf/tools/arch/x86/ -I /tmp/build/perf//util -I /tmp/build/perf/ -I /home/acme/git/perf/tools/perf/util -I /home/acme/git/perf/tools/perf -I /home/acme/git/perf/tools/lib/ -D HAVE_PTHREAD_ATTR_SETAFFINITY_NP -D HAVE_PTHREAD_BARRIER -D HAVE_EVENTFD -D HAVE_GET_CURRENT_DIR_NAME -D HAVE_GETTID -D HAVE_DWARF_GETLOCATIONS_SUPPORT -D HAVE_GLIBC_SUPPORT -D HAVE_AIO_SUPPORT -D HAVE_SCHED_GETCPU_SUPPORT -D HAVE_SETNS_SUPPORT -D HAVE_LIBELF_SUPPORT -D HAVE_LIBELF_MMAP_SUPPORT -D HAVE_ELF_GETPHDRNUM_SUPPORT -D HAVE_GELF_GETNOTE_SUPPORT -D HAVE_ELF_GETSHDRSTRNDX_SUPPORT -D HAVE_DWARF_SUPPORT -D HAVE_LIBBPF_SUPPORT -D HAVE_BPF_PROLOGUE -D HAVE_SDT_EVENT -D HAVE_JITDUMP -D HAVE_DWARF_UNWIND_SUPPORT -D NO_LIBUNWIND_DEBUG_FRAME -D HAVE_LIBUNWIND_SUPPORT -D HAVE_LIBCRYPTO_SUPPORT -D HAVE_SLANG_SUPPORT -D HAVE_GTK2_SUPPORT -D NO_LIBPERL -D HAVE_TIMERFD_SUPPORT -D HAVE_LIBPYTHON_SUPPORT -D HAVE_CPLUS_DEMANGLE_SUPPORT -D HAVE_LIBBFD_SUPPORT -D HAVE_ZLIB_SUPPORT -D HAVE_LZMA_SUPPORT -D HAVE_ZSTD_SUPPORT -D HAVE_LIBCAP_SUPPORT -D HAVE_BACKTRACE_SUPPORT -D HAVE_LIBNUMA_SUPPORT -D HAVE_KVM_STAT_SUPPORT -D DISASM_FOUR_ARGS_SIGNATURE -D HAVE_LIBBABELTRACE_SUPPORT -D HAVE_AUXTRACE_SUPPORT -D HAVE_JVMTI_CMLR -I /tmp/build/perf/ -fPIC -I util/include -I /usr/include/python3.7m -c /home/acme/git/perf/tools/perf/util/python.c -o /tmp/build/perf/python_ext_build/tmp/home/acme/git/perf/tools/perf/util/python.o -Wbad-function-cast -Wdeclaration-after-statement -Wformat-security -Wformat-y2k -Winit-self -Wmissing-declarations -Wmissing-prototypes -Wnested-externs -Wno-system-headers -Wold-style-definition -Wpacked -Wredundant-decls -Wstrict-prototypes -Wswitch-default -Wswitch-enum -Wundef -Wwrite-strings -Wformat -Wshadow -D HAVE_ARCH_X86_64_SUPPORT -I /tmp/build/perf/arch/x86/include/generated -D HAVE_SYSCALL_TABLE_SUPPORT -D HAVE_PERF_REGS_SUPPORT -D HAVE_ARCH_REGS_QUERY_REGISTER_OFFSET -Werror -O3 -fno-omit-frame-pointer -ggdb3 -funwind-tables -Wall -Wextra -std=gnu99 -fstack-protector-all -D _FORTIFY_SOURCE=2 -D _LARGEFILE64_SOURCE -D _FILE_OFFSET_BITS=64 -D _GNU_SOURCE -I /home/acme/git/perf/tools/lib/perf/include -I /home/acme/git/perf/tools/perf/util/include -I /home/acme/git/perf/tools/perf/arch/x86/include -I /home/acme/git/perf/tools/include/ -I /home/acme/git/perf/tools/arch/x86/include/uapi -I /home/acme/git/perf/tools/include/uapi -I /home/acme/git/perf/tools/arch/x86/include/ -I /home/acme/git/perf/tools/arch/x86/ -I /tmp/build/perf//util -I /tmp/build/perf/ -I /home/acme/git/perf/tools/perf/util -I /home/acme/git/perf/tools/perf -I /home/acme/git/perf/tools/lib/ -D HAVE_PTHREAD_ATTR_SETAFFINITY_NP -D HAVE_PTHREAD_BARRIER -D HAVE_EVENTFD -D HAVE_GET_CURRENT_DIR_NAME -D HAVE_GETTID -D HAVE_DWARF_GETLOCATIONS_SUPPORT -D HAVE_GLIBC_SUPPORT -D HAVE_AIO_SUPPORT -D HAVE_SCHED_GETCPU_SUPPORT -D HAVE_SETNS_SUPPORT -D HAVE_LIBELF_SUPPORT -D HAVE_LIBELF_MMAP_SUPPORT -D HAVE_ELF_GETPHDRNUM_SUPPORT -D HAVE_GELF_GETNOTE_SUPPORT -D HAVE_ELF_GETSHDRSTRNDX_SUPPORT -D HAVE_DWARF_SUPPORT -D HAVE_LIBBPF_SUPPORT -D HAVE_BPF_PROLOGUE -D HAVE_SDT_EVENT -D HAVE_JITDUMP -D HAVE_DWARF_UNWIND_SUPPORT -D NO_LIBUNWIND_DEBUG_FRAME -D HAVE_LIBUNWIND_SUPPORT -D HAVE_LIBCRYPTO_SUPPORT -D HAVE_SLANG_SUPPORT -D HAVE_GTK2_SUPPORT -D NO_LIBPERL -D HAVE_TIMERFD_SUPPORT -D HAVE_LIBPYTHON_SUPPORT -D HAVE_CPLUS_DEMANGLE_SUPPORT -D HAVE_LIBBFD_SUPPORT -D HAVE_ZLIB_SUPPORT -D HAVE_LZMA_SUPPORT -D HAVE_ZSTD_SUPPORT -D HAVE_LIBCAP_SUPPORT -D HAVE_BACKTRACE_SUPPORT -D HAVE_LIBNUMA_SUPPORT -D HAVE_KVM_STAT_SUPPORT -D DISASM_FOUR_ARGS_SIGNATURE -D HAVE_LIBBABELTRACE_SUPPORT -D HAVE_AUXTRACE_SUPPORT -D HAVE_JVMTI_CMLR -I /tmp/build/perf/ -fno-strict-aliasing -Wno-write-strings -Wno-unused-parameter -Wno-redundant-decls
$
And here is how tools/perf/util/setup.py checks if the used clang has
options that the distro specific python extension building compiler
defaults:
if cc_is_clang:
from distutils.sysconfig import get_config_vars
vars = get_config_vars()
for var in ('CFLAGS', 'OPT'):
vars[var] = sub("-specs=[^ ]+", "", vars[var])
if not clang_has_option("-mcet"):
vars[var] = sub("-mcet", "", vars[var])
if not clang_has_option("-fcf-protection"):
vars[var] = sub("-fcf-protection", "", vars[var])
if not clang_has_option("-fstack-clash-protection"):
vars[var] = sub("-fstack-clash-protection", "", vars[var])
if not clang_has_option("-fstack-protector-strong"):
vars[var] = sub("-fstack-protector-strong", "", vars[var])
So "-fcf-protection=full" is used, clang-9 has this option and thus it
was kept, the perf python extension was built with it and the build
completed successfully.
Link: https://github.com/ClangBuiltLinux/linux/issues/903
Signed-off-by: Ilie Halip <[email protected]>
Tested-by: Arnaldo Carvalho de Melo <[email protected]>
Cc: Alexander Shishkin <[email protected]>
Cc: Igor Lubashev <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Mark Rutland <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: [email protected]
Link: http://lore.kernel.org/lkml/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
This patch fixes an off-by-one error in strncpy size argument in
tools/perf/util/map.c. The issue is that in:
strncmp(filename, "/system/lib/", 11)
the passed string literal: "/system/lib/" has 12 bytes (without the NULL
byte) and the passed size argument is 11. As a result, the logic won't
match the ending "/" byte and will pass filepaths that are stored in
other directories e.g. "/system/libmalicious/bin" or just
"/system/libmalicious".
This functionality seems to be present only on Android. I assume the
/system/ directory is only writable by the root user, so I don't think
this bug has much (or any) security impact.
Fixes: eca818369996 ("perf tools: Add automatic remapping of Android libraries")
Signed-off-by: disconnect3d <[email protected]>
Cc: Alexander Shishkin <[email protected]>
Cc: Changbin Du <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: John Keeping <[email protected]>
Cc: Mark Rutland <[email protected]>
Cc: Michael Lentine <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Song Liu <[email protected]>
Cc: Stephane Eranian <[email protected]>
Link: http://lore.kernel.org/lkml/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
We need the driver core and debugfs changes in here as well.
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
gitolite.kernel.org:pub/scm/linux/kernel/git/brauner/linux
Pull thread fixes from Christian Brauner:
"Here are a few hopefully uncontroversial fixes:
- Use RCU_INIT_POINTER() when initializing rcu protected members in
task_struct to fix sparse warnings.
- Add pidfd_fdinfo_test binary to .gitignore file"
* tag 'for-linus-2020-03-07' of gitolite.kernel.org:pub/scm/linux/kernel/git/brauner/linux:
selftests: pidfd: Add pidfd_fdinfo_test in .gitignore
exit: Fix Sparse errors and warnings
fork: Use RCU_INIT_POINTER() instead of rcu_access_pointer()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest
Pull kselftest update from Shuah Khan:
"This consists of a cleanup patch to undo changes to global .gitignore
that added selftests/lkdtm objects and add them to a local
selftests/lkdtm/.gitignore.
Summary of Linus's comments on local vs. global gitignore scope:
- Keep local gitignore patterns in local files.
- Put only global gitignore patterns in the top-level gitignore file.
Local scope keeps things much better separated. It also incidentally
means that if a directory gets renamed, the gitignore file continues
to work unless in the case of renaming the actual files themselves
that are named in the gitignore"
* tag 'linux-kselftest-5.6-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
selftest/lkdtm: Use local .gitignore
|
|
When I tried to compile tools/perf from the top directory with the -C
option, the O= option didn't work correctly if I passed a relative path:
$ make O=BUILD -C tools/perf/
make: Entering directory '/home/mhiramat/ksrc/linux/tools/perf'
BUILD: Doing 'make -j8' parallel build
../scripts/Makefile.include:4: *** O=/home/mhiramat/ksrc/linux/tools/perf/BUILD does not exist. Stop.
make: *** [Makefile:70: all] Error 2
make: Leaving directory '/home/mhiramat/ksrc/linux/tools/perf'
The O= directory existence check failed because the check script ran in
the build target directory instead of the directory where I ran the make
command.
To fix that, once change directory to $(PWD) and check O= directory,
since the PWD is set to where the make command runs.
Fixes: c883122acc0d ("perf tools: Let O= makes handle relative paths")
Reported-by: Randy Dunlap <[email protected]>
Signed-off-by: Masami Hiramatsu <[email protected]>
Cc: Andrew Morton <[email protected]>
Cc: Borislav Petkov <[email protected]>
Cc: Geert Uytterhoeven <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Masahiro Yamada <[email protected]>
Cc: Michal Marek <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Sasha Levin <[email protected]>
Cc: Steven Rostedt (VMware) <[email protected]>
Cc: [email protected]
Link: http://lore.kernel.org/lkml/158351957799.3363.15269768530697526765.stgit@devnote2
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
The existing tests attempt to check that JMP32 JSET ignores the upper
bits in the operand registers. However, the tests missed one such bug in
the x32 JIT that is only uncovered when a previous instruction pollutes
the upper 32 bits of the registers.
This patch adds a new test case that catches the bug by first executing
a 64-bit JSET to pollute the upper 32-bits of the temporary registers,
followed by a 32-bit JSET which should ignore the upper 32 bits.
Co-developed-by: Xi Wang <[email protected]>
Signed-off-by: Xi Wang <[email protected]>
Signed-off-by: Luke Nelson <[email protected]>
Signed-off-by: Daniel Borkmann <[email protected]>
Link: https://lore.kernel.org/bpf/[email protected]
|
|
This is currently working due to extra include paths in the build.
Committer testing:
$ cd tools/include/uapi/asm/
Before this patch:
$ ls -la ../../arch/x86/include/uapi/asm/errno.h
ls: cannot access '../../arch/x86/include/uapi/asm/errno.h': No such file or directory
$
After this patch;
$ ls -la ../../../arch/x86/include/uapi/asm/errno.h
-rw-rw-r--. 1 acme acme 31 Feb 20 12:42 ../../../arch/x86/include/uapi/asm/errno.h
$
Check that that is still under tools/, i.e. hasn't escaped into the main
kernel sources:
$ cd ../../../arch/x86/include/uapi/asm/
$ pwd
/home/acme/git/perf/tools/arch/x86/include/uapi/asm
$
Signed-off-by: Ian Rogers <[email protected]>
Tested-by: Arnaldo Carvalho de Melo <[email protected]>
Acked-by: Jiri Olsa <[email protected]>
Cc: Adrian Hunter <[email protected]>
Cc: Alexander Shishkin <[email protected]>
Cc: Alexios Zavras <[email protected]>
Cc: Andi Kleen <[email protected]>
Cc: Greg Kroah-Hartman <[email protected]>
Cc: Igor Lubashev <[email protected]>
Cc: Kan Liang <[email protected]>
Cc: Mark Rutland <[email protected]>
Cc: Mathieu Poirier <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Nick Desaulniers <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Stephane Eranian <[email protected]>
Cc: Thomas Gleixner <[email protected]>
Cc: Wei Li <[email protected]>
Link: http://lore.kernel.org/lkml/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
The memory for global pointer is never freed during normal program
execution, so let's do that in the main function exit as a good
programming practice.
A stray blank line is also removed.
Reported-by: Jiri Olsa <[email protected]>
Signed-off-by: John Garry <[email protected]>
Cc: Alexander Shishkin <[email protected]>
Cc: Andi Kleen <[email protected]>
Cc: James Clark <[email protected]>
Cc: Joakim Zhang <[email protected]>
Cc: Mark Rutland <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Will Deacon <[email protected]>
Cc: [email protected]
Link: http://lore.kernel.org/lkml/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
Avoid garbage in sigaction structs used in sigaction() syscalls.
Valgrind is complaining about it.
Signed-off-by: Tommi Rantala <[email protected]>
Cc: Alexander Shishkin <[email protected]>
Cc: Changbin Du <[email protected]>
Cc: Darren Hart <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Mark Rutland <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Thomas Gleixner <[email protected]>
Link: http://lore.kernel.org/lkml/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
Since commit 3b2323c2c1c4 ("perf bench futex: Use cpumaps") the default
number of threads the benchmark uses got changed from number of online
CPUs to zero:
$ perf bench futex wake
# Running 'futex/wake' benchmark:
Run summary [PID 15930]: blocking on 0 threads (at [private] futex 0x558b8ee4bfac), waking up 1 at a time.
[Run 1]: Wokeup 0 of 0 threads in 0.0000 ms
[...]
[Run 10]: Wokeup 0 of 0 threads in 0.0000 ms
Wokeup 0 of 0 threads in 0.0004 ms (+-40.82%)
Restore the old behavior by grabbing the number of online CPUs via
cpu->nr:
$ perf bench futex wake
# Running 'futex/wake' benchmark:
Run summary [PID 18356]: blocking on 8 threads (at [private] futex 0xb3e62c), waking up 1 at a time.
[Run 1]: Wokeup 8 of 8 threads in 0.0260 ms
[...]
[Run 10]: Wokeup 8 of 8 threads in 0.0270 ms
Wokeup 8 of 8 threads in 0.0419 ms (+-24.35%)
Fixes: 3b2323c2c1c4 ("perf bench futex: Use cpumaps")
Signed-off-by: Tommi Rantala <[email protected]>
Tested-by: Arnaldo Carvalho de Melo <[email protected]>
Cc: Alexander Shishkin <[email protected]>
Cc: Darren Hart <[email protected]>
Cc: Davidlohr Bueso <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Mark Rutland <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Thomas Gleixner <[email protected]>
Link: http://lore.kernel.org/lkml/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
Since glibc 2.28 when running 'perf top --stdio', input handling no
longer works, but hitting any key always just prints the "Mapped keys"
help text.
To fix it, call clearerr() in the display_thread() loop to clear any EOF
sticky errors, as instructed in the glibc NEWS file
(https://sourceware.org/git/?p=glibc.git;a=blob;f=NEWS):
* All stdio functions now treat end-of-file as a sticky condition. If you
read from a file until EOF, and then the file is enlarged by another
process, you must call clearerr or another function with the same effect
(e.g. fseek, rewind) before you can read the additional data. This
corrects a longstanding C99 conformance bug. It is most likely to affect
programs that use stdio to read interactive input from a terminal.
(Bug #1190.)
Signed-off-by: Tommi Rantala <[email protected]>
Tested-by: Arnaldo Carvalho de Melo <[email protected]>
Cc: Alexander Shishkin <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Mark Rutland <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Link: http://lore.kernel.org/lkml/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
clang warns:
util/block-info.c:298:18: error: result of comparison against a string
literal is unspecified (use an explicit string comparison function
instead) [-Werror,-Wstring-compare]
if ((start_line != SRCLINE_UNKNOWN) && (end_line != SRCLINE_UNKNOWN)) {
^ ~~~~~~~~~~~~~~~
util/block-info.c:298:51: error: result of comparison against a string
literal is unspecified (use an explicit string comparison function
instead) [-Werror,-Wstring-compare]
if ((start_line != SRCLINE_UNKNOWN) && (end_line != SRCLINE_UNKNOWN)) {
^ ~~~~~~~~~~~~~~~
util/block-info.c:298:18: error: result of comparison against a string
literal is unspecified (use an explicit string
comparison function instead) [-Werror,-Wstring-compare]
if ((start_line != SRCLINE_UNKNOWN) && (end_line != SRCLINE_UNKNOWN)) {
^ ~~~~~~~~~~~~~~~
util/block-info.c:298:51: error: result of comparison against a string
literal is unspecified (use an explicit string comparison function
instead) [-Werror,-Wstring-compare]
if ((start_line != SRCLINE_UNKNOWN) && (end_line != SRCLINE_UNKNOWN)) {
^ ~~~~~~~~~~~~~~~
util/map.c:434:15: error: result of comparison against a string literal
is unspecified (use an explicit string comparison function instead)
[-Werror,-Wstring-compare]
if (srcline != SRCLINE_UNKNOWN)
^ ~~~~~~~~~~~~~~~
Reviewer Notes:
Looks good to me. Some more context:
https://clang.llvm.org/docs/DiagnosticsReference.html#wstring-compare
The spec says:
J.1 Unspecified behavior
The following are unspecified:
.. Whether two string literals result in distinct arrays (6.4.5).
Signed-off-by: Nick Desaulniers <[email protected]>
Reviewed-by: Ian Rogers <[email protected]>
Cc: Alexander Shishkin <[email protected]>
Cc: Changbin Du <[email protected]>
Cc: Jin Yao <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: John Keeping <[email protected]>
Cc: Mark Rutland <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Song Liu <[email protected]>
Cc: [email protected]
Link: https://github.com/ClangBuiltLinux/linux/issues/900
Link: http://lore.kernel.org/lkml/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
Signed-off-by: Roman Mashak <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
Signed-off-by: Roman Mashak <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|