aboutsummaryrefslogtreecommitdiff
path: root/tools
AgeCommit message (Collapse)AuthorFilesLines
2019-11-06perf evsel: Always preserve errno while cleaning up perf_event_open failuresAndi Kleen1-2/+4
In some cases when perf_event_open fails, it may do some closes to clean up. In special cases these closes can fail too, which overwrites the errno of the perf_event_open, which is then incorrectly reported. Save/restore errno around closes. Signed-off-by: Andi Kleen <[email protected]> Acked-by: Jiri Olsa <[email protected]> Cc: Kan Liang <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: Stephane Eranian <[email protected]> Link: http://lore.kernel.org/lkml/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2019-11-06perf cs-etm: Fix definition of macro TO_CS_QUEUE_NRLeo Yan1-2/+2
Macro TO_CS_QUEUE_NR definition has a typo, which uses 'trace_id_chan' as its parameter, this doesn't match with its definition body which uses 'trace_chan_id'. So renames the parameter to 'trace_chan_id'. It's luck to have a local variable 'trace_chan_id' in the function cs_etm__setup_queue(), even we wrongly define the macro TO_CS_QUEUE_NR, the local variable 'trace_chan_id' is used rather than the macro's parameter 'trace_id_chan'; so the compiler doesn't complain for this before. After renaming the parameter, it leads to a compiling error due cs_etm__setup_queue() has no variable 'trace_id_chan'. This patch uses the variable 'trace_chan_id' for the macro so that fixes the compiling error. Signed-off-by: Leo Yan <[email protected]> Reviewed-by: Mathieu Poirier <[email protected]> Cc: Alexander Shishkin <[email protected]> Cc: Jiri Olsa <[email protected]> Cc: Mark Rutland <[email protected]> Cc: Namhyung Kim <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: Suzuki Poulouse <[email protected]> Cc: coresight ml <[email protected]> Cc: [email protected] Link: http://lore.kernel.org/lkml/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2019-11-06perf llvm: Make .o saving a debug message, not an info oneArnaldo Carvalho de Melo1-3/+2
Its a bit annoying to have that message, better make it a debug one. I.e. now this message will only appear when using '-v': [root@quaco tracebuffer]# trace -e bristot.c LLVM: dumping bristot.o ^C[root@quaco tracebuffer]# Cc: Adrian Hunter <[email protected]> Cc: Daniel Bristot de Oliveira <[email protected]> Cc: David Ahern <[email protected]> Cc: Jiri Olsa <[email protected]> Cc: Luis Cláudio Gonçalves <[email protected]> Cc: Namhyung Kim <[email protected]> Link: https://lkml.kernel.org/n/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2019-11-06perf record: Put a copy of kcore into the perf.data directoryAdrian Hunter8-0/+147
Add a new 'perf record' option '--kcore' which will put a copy of /proc/kcore, kallsyms and modules into a perf.data directory. Note, that without the --kcore option, output goes to a file as previously. The tools' -o and -i options work with either a file name or directory name. Example: $ sudo perf record --kcore uname $ sudo tree perf.data perf.data ├── kcore_dir │   ├── kallsyms │   ├── kcore │   └── modules └── data $ sudo perf script -v build id event received for vmlinux: 1eaa285996affce2d74d8e66dcea09a80c9941de build id event received for [vdso]: 8bbaf5dc62a9b644b4d4e4539737e104e4a84541 Samples for 'cycles' event do not have CPU attribute set. Skipping 'cpu' field. Using CPUID GenuineIntel-6-8E-A Using perf.data/kcore_dir/kcore for kernel data Using perf.data/kcore_dir/kallsyms for symbols perf 19058 506778.423729: 1 cycles: ffffffffa2caa548 native_write_msr+0x8 (vmlinux) perf 19058 506778.423733: 1 cycles: ffffffffa2caa548 native_write_msr+0x8 (vmlinux) perf 19058 506778.423734: 7 cycles: ffffffffa2caa548 native_write_msr+0x8 (vmlinux) perf 19058 506778.423736: 117 cycles: ffffffffa2caa54a native_write_msr+0xa (vmlinux) perf 19058 506778.423738: 2092 cycles: ffffffffa2c9b7b0 native_apic_msr_write+0x0 (vmlinux) perf 19058 506778.423740: 37380 cycles: ffffffffa2f121d0 perf_event_addr_filters_exec+0x0 (vmlinux) uname 19058 506778.423751: 582673 cycles: ffffffffa303a407 propagate_protected_usage+0x147 (vmlinux) uname 19058 506778.423892: 2241841 cycles: ffffffffa2cae0c9 unwind_next_frame.part.5+0x79 (vmlinux) uname 19058 506778.424430: 2457397 cycles: ffffffffa3019232 check_memory_region+0x52 (vmlinux) Committer testing: # rm -rf perf.data* # perf record sleep 1 [ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 0.024 MB perf.data (7 samples) ] # ls -l perf.data -rw-------. 1 root root 34772 Oct 21 11:08 perf.data # perf record --kcore uname Linux [ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 0.024 MB perf.data (7 samples) ] ls[root@quaco ~]# ls -lad perf.data* drwx------. 3 root root 4096 Oct 21 11:08 perf.data -rw-------. 1 root root 34772 Oct 21 11:08 perf.data.old # perf evlist -v cycles: size: 112, { sample_period, sample_freq }: 4000, sample_type: IP|TID|TIME|PERIOD, read_format: ID, disabled: 1, inherit: 1, mmap: 1, comm: 1, freq: 1, enable_on_exec: 1, task: 1, precise_ip: 3, sample_id_all: 1, exclude_guest: 1, mmap2: 1, comm_exec: 1, ksymbol: 1, bpf_event: 1 # perf evlist -v -i perf.data/data cycles: size: 112, { sample_period, sample_freq }: 4000, sample_type: IP|TID|TIME|PERIOD, read_format: ID, disabled: 1, inherit: 1, mmap: 1, comm: 1, freq: 1, enable_on_exec: 1, task: 1, precise_ip: 3, sample_id_all: 1, exclude_guest: 1, mmap2: 1, comm_exec: 1, ksymbol: 1, bpf_event: 1 # Signed-off-by: Adrian Hunter <[email protected]> Reviewed-by: Jiri Olsa <[email protected]> Tested-by: Arnaldo Carvalho de Melo <[email protected]> Link: http://lore.kernel.org/lkml/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2019-11-06perf data: Support single perf.data file directoryAdrian Hunter4-2/+43
Support directory output that contains a regular perf.data file, named "data". By default the directory is named perf.data i.e. perf.data └── data Most of the infrastructure to support a directory is already there. This patch makes the changes needed to support the format above. Presently there is no 'perf record' option to output a directory. This is preparation for adding support for putting a copy of /proc/kcore in the directory. Signed-off-by: Adrian Hunter <[email protected]> Reviewed-by: Jiri Olsa <[email protected]> Link: http://lore.kernel.org/lkml/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2019-11-06perf session: Fix indent in perf_session__new()"Jiri Olsa1-2/+2
Fix up indentation. Signed-off-by: Jiri Olsa <[email protected]> Acked-by: Adrian Hunter <[email protected]> Link: http://lore.kernel.org/lkml/20191007112027.GD6919@krava Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2019-11-06perf data: Rename directory "header" file to "data"Adrian Hunter2-2/+2
In preparation to support a single file directory format, rename "header" to "data" because "header" is a mis-leading name when there is only 1 file. Note, in the multi-file case, the "header" file also contains data. Signed-off-by: Adrian Hunter <[email protected]> Reviewed-by: Jiri Olsa <[email protected]> Link: http://lore.kernel.org/lkml/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2019-11-06perf data: Move perf_dir_version into data.hAdrian Hunter2-4/+4
perf_dir_version belongs to struct perf_data which is declared in data.h. To allow its use in inline perf_data functions, move perf_dir_version to data.h Signed-off-by: Adrian Hunter <[email protected]> Reviewed-by: Jiri Olsa <[email protected]> Link: http://lore.kernel.org/lkml/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2019-11-06perf data: Correctly identify directory data filesAdrian Hunter1-1/+1
In order to rename the "header" file to "data" without conflicting, correctly identify the non-header files as starting with "data." Signed-off-by: Adrian Hunter <[email protected]> Reviewed-by: Jiri Olsa <[email protected]> Link: http://lore.kernel.org/lkml/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2019-10-28Merge branch 'perf/urgent' into perf/core, to pick up fixesIngo Molnar20-50/+95
Signed-off-by: Ingo Molnar <[email protected]>
2019-10-27Merge branch 'perf-urgent-for-linus' of ↵Linus Torvalds12-17/+65
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull perf fixes from Thomas Gleixner: "A set of perf fixes: kernel: - Unbreak the tracking of auxiliary buffer allocations which got imbalanced causing recource limit failures. - Fix the fallout of splitting of ToPA entries which missed to shift the base entry PA correctly. - Use the correct context to lookup the AUX event when unmapping the associated AUX buffer so the event can be stopped and the buffer reference dropped. tools: - Fix buildiid-cache mode setting in copyfile_mode_ns() when copying /proc/kcore - Fix freeing id arrays in the event list so the correct event is closed. - Sync sched.h anc kvm.h headers with the kernel sources. - Link jvmti against tools/lib/ctype.o to have weak strlcpy(). - Fix multiple memory and file descriptor leaks, found by coverity in perf annotate. - Fix leaks in error handling paths in 'perf c2c', 'perf kmem', found by a static analysis tool" * 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: perf/aux: Fix AUX output stopping perf/aux: Fix tracking of auxiliary trace buffer allocation perf/x86/intel/pt: Fix base for single entry topa perf kmem: Fix memory leak in compact_gfp_flags() tools headers UAPI: Sync sched.h with the kernel tools headers kvm: Sync kvm.h headers with the kernel sources tools headers kvm: Sync kvm headers with the kernel sources tools headers kvm: Sync kvm headers with the kernel sources perf c2c: Fix memory leak in build_cl_output() perf tools: Fix mode setting in copyfile_mode_ns() perf annotate: Fix multiple memory and file descriptor leaks perf tools: Fix resource leak of closedir() on the error paths perf evlist: Fix fix for freed id arrays perf jvmti: Link against tools/lib/ctype.h to have weak strlcpy()
2019-10-22selftests: kvm: fix sync_regs_test with newer gccsVitaly Kuznetsov1-10/+11
Commit 204c91eff798a ("KVM: selftests: do not blindly clobber registers in guest asm") was intended to make test more gcc-proof, however, the result is exactly the opposite: on newer gccs (e.g. 8.2.1) the test breaks with ==== Test Assertion Failure ==== x86_64/sync_regs_test.c:168: run->s.regs.regs.rbx == 0xBAD1DEA + 1 pid=14170 tid=14170 - Invalid argument 1 0x00000000004015b3: main at sync_regs_test.c:166 (discriminator 6) 2 0x00007f413fb66412: ?? ??:0 3 0x000000000040191d: _start at ??:? rbx sync regs value incorrect 0x1. Apparently, compile is still free to play games with registers even when they have variables attached. Re-write guest code with 'asm volatile' by embedding ucall there and making sure rbx is preserved. Fixes: 204c91eff798a ("KVM: selftests: do not blindly clobber registers in guest asm") Signed-off-by: Vitaly Kuznetsov <[email protected]> Signed-off-by: Paolo Bonzini <[email protected]>
2019-10-22selftests: kvm: vmx_dirty_log_test: skip the test when VMX is not supportedVitaly Kuznetsov1-0/+2
vmx_dirty_log_test fails on AMD and this is no surprise as it is VMX specific. Bail early when nested VMX is unsupported. Signed-off-by: Vitaly Kuznetsov <[email protected]> Signed-off-by: Paolo Bonzini <[email protected]>
2019-10-22selftests: kvm: consolidate VMX support checksVitaly Kuznetsov5-15/+15
vmx_* tests require VMX and three of them implement the same check. Move it to vmx library. Signed-off-by: Vitaly Kuznetsov <[email protected]> Signed-off-by: Paolo Bonzini <[email protected]>
2019-10-22selftests: kvm: vmx_set_nested_state_test: don't check for VMX support twiceVitaly Kuznetsov1-6/+1
vmx_set_nested_state_test() checks if VMX is supported twice: in the very beginning (and skips the whole test if it's not) and before doing test_vmx_nested_state(). One should be enough. Signed-off-by: Vitaly Kuznetsov <[email protected]> Signed-off-by: Paolo Bonzini <[email protected]>
2019-10-22selftests: kvm: synchronize .gitignore to MakefileVitaly Kuznetsov1-0/+2
Because "Untracked files:" are annoying. Signed-off-by: Vitaly Kuznetsov <[email protected]> Signed-off-by: Paolo Bonzini <[email protected]>
2019-10-22Merge tag 'perf-core-for-mingo-5.5-20191021' of ↵Ingo Molnar60-287/+1301
git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux into perf/core Pull perf/core improvements and fixes from Arnaldo Carvalho de Melo: perf trace: - Add syscall failure stats to -s/--summary and -S/--with-summary, works in combination with specifying just a set of syscalls, see below first with -s/--summary, then with -S/--with-summary just for the syscalls we saw failing with -s: # perf trace -s sleep 1 Summary of events: sleep (16218), 80 events, 93.0% syscall calls errors total min avg max stddev (msec) (msec) (msec) (msec) (%) ----------- ----- ------ -------- -------- -------- -------- ------ nanosleep 1 0 1000.091 1000.091 1000.091 1000.091 0.00% mmap 8 0 0.045 0.005 0.006 0.008 7.09% mprotect 4 0 0.028 0.005 0.007 0.009 11.38% openat 3 0 0.021 0.005 0.007 0.009 14.07% munmap 1 0 0.017 0.017 0.017 0.017 0.00% brk 4 0 0.010 0.001 0.002 0.004 23.15% read 4 0 0.009 0.002 0.002 0.003 8.13% close 5 0 0.008 0.001 0.002 0.002 10.83% fstat 3 0 0.006 0.002 0.002 0.002 6.97% access 1 1 0.006 0.006 0.006 0.006 0.00% lseek 3 0 0.005 0.001 0.002 0.002 7.37% arch_prctl 2 1 0.004 0.001 0.002 0.002 17.64% execve 1 0 0.000 0.000 0.000 0.000 0.00% # perf trace -e access,arch_prctl -S sleep 1 0.000 ( 0.006 ms): sleep/19503 arch_prctl(option: 0x3001, arg2: 0x7fff165996b0) = -1 EINVAL (Invalid argument) 0.024 ( 0.006 ms): sleep/19503 access(filename: 0x2177e510, mode: R) = -1 ENOENT (No such file or directory) 0.136 ( 0.002 ms): sleep/19503 arch_prctl(option: SET_FS, arg2: 0x7f9421737580) = 0 Summary of events: sleep (19503), 6 events, 50.0% syscall calls errors total min avg max stddev (msec) (msec) (msec) (msec) (%) ---------- ----- ------ ------ ------ ------ ------ ------ arch_prctl 2 1 0.008 0.002 0.004 0.006 57.22% access 1 1 0.006 0.006 0.006 0.006 0.00% # - Introduce --errno-summary, to drill down a bit more in the errno stats: # perf trace --errno-summary -e access,arch_prctl -S sleep 1 0.000 ( 0.006 ms): sleep/5587 arch_prctl(option: 0x3001, arg2: 0x7ffd6ba6aa00) = -1 EINVAL (Invalid argument) 0.028 ( 0.007 ms): sleep/5587 access(filename: 0xb83d9510, mode: R) = -1 ENOENT (No such file or directory) 0.172 ( 0.003 ms): sleep/5587 arch_prctl(option: SET_FS, arg2: 0x7f45b8392580) = 0 Summary of events: sleep (5587), 6 events, 50.0% syscall calls errors total min avg max stddev (msec) (msec) (msec) (msec) (%) ---------- ----- ------ ------ ------ ------ ------ ------ arch_prctl 2 1 0.009 0.003 0.005 0.006 38.90% EINVAL: 1 access 1 1 0.007 0.007 0.007 0.007 0.00% ENOENT: 1 # - Filter own pid to avoid a feedback look in 'perf trace record -a' - Add the glue for the auto generated x86 IRQ vector array. - Show error message when not finding a field used in a filter expression # perf trace --max-events=4 -e syscalls:sys_enter_write --filter="cnt>32767" Failed to set filter "(cnt>32767) && (common_pid != 19938 && common_pid != 8922)" on event syscalls:sys_enter_write with 22 (Invalid argument) # # perf trace --max-events=4 -e syscalls:sys_enter_write --filter="count>32767" 0.000 python3.5/17535 syscalls:sys_enter_write(fd: 3, buf: 0x564b0dc53600, count: 172086) 12.641 python3.5.post/17535 syscalls:sys_enter_write(fd: 3, buf: 0x564b0db63660, count: 75994) 27.738 python3.5.post/17535 syscalls:sys_enter_write(fd: 3, buf: 0x564b0db4b1e0, count: 41635) 136.070 python3.5.post/17535 syscalls:sys_enter_write(fd: 3, buf: 0x564b0dbab510, count: 62232) # - Add a generator for x86's IRQ vectors -> strings - Introduce stroul() (string -> number) methods for the strarray and strarrays classes, also strtoul_flags, allowing to go from both strings and or-ed strings to numbers, allowing things like: # perf trace -e syscalls:sys_enter_mmap --filter="flags==DENYWRITE|PRIVATE|FIXED" sleep 1 0.000 sleep/22588 syscalls:sys_enter_mmap(addr: 0x7f42d2aa5000, len: 1363968, prot: READ|EXEC, flags: PRIVATE|FIXED|DENYWRITE, fd: 3, off: 0x22000) 0.011 sleep/22588 syscalls:sys_enter_mmap(addr: 0x7f42d2bf2000, len: 311296, prot: READ, flags: PRIVATE|FIXED|DENYWRITE, fd: 3, off: 0x16f000) 0.015 sleep/22588 syscalls:sys_enter_mmap(addr: 0x7f42d2c3f000, len: 24576, prot: READ|WRITE, flags: PRIVATE|FIXED|DENYWRITE, fd: 3, off: 0x1bb000) # Allowing to narrow down from the complete set of mmap calls for that workload: # perf trace -e syscalls:sys_enter_mmap sleep 1 0.000 sleep/22695 syscalls:sys_enter_mmap(len: 134773, prot: READ, flags: PRIVATE, fd: 3) 0.041 sleep/22695 syscalls:sys_enter_mmap(len: 8192, prot: READ|WRITE, flags: PRIVATE|ANONYMOUS) 0.053 sleep/22695 syscalls:sys_enter_mmap(len: 1857472, prot: READ, flags: PRIVATE|DENYWRITE, fd: 3) 0.069 sleep/22695 syscalls:sys_enter_mmap(addr: 0x7fd23ffb6000, len: 1363968, prot: READ|EXEC, flags: PRIVATE|FIXED|DENYWRITE, fd: 3, off: 0x22000) 0.077 sleep/22695 syscalls:sys_enter_mmap(addr: 0x7fd240103000, len: 311296, prot: READ, flags: PRIVATE|FIXED|DENYWRITE, fd: 3, off: 0x16f000) 0.083 sleep/22695 syscalls:sys_enter_mmap(addr: 0x7fd240150000, len: 24576, prot: READ|WRITE, flags: PRIVATE|FIXED|DENYWRITE, fd: 3, off: 0x1bb000) 0.095 sleep/22695 syscalls:sys_enter_mmap(addr: 0x7fd240156000, len: 14272, prot: READ|WRITE, flags: PRIVATE|FIXED|ANONYMOUS) 0.339 sleep/22695 syscalls:sys_enter_mmap(len: 217750512, prot: READ, flags: PRIVATE, fd: 3) # Works with all targets, so, for system wide, looking at who calls mmap with flags set to just "PRIVATE": # perf trace --max-events=5 -e syscalls:sys_enter_mmap --filter="flags==PRIVATE" 0.000 pool/2242 syscalls:sys_enter_mmap(len: 756, prot: READ, flags: PRIVATE, fd: 14) 0.050 pool/2242 syscalls:sys_enter_mmap(len: 756, prot: READ, flags: PRIVATE, fd: 14) 0.062 pool/2242 syscalls:sys_enter_mmap(len: 756, prot: READ, flags: PRIVATE, fd: 14) 0.145 goa-identity-s/2240 syscalls:sys_enter_mmap(len: 756, prot: READ, flags: PRIVATE, fd: 18) 0.183 goa-identity-s/2240 syscalls:sys_enter_mmap(len: 756, prot: READ, flags: PRIVATE, fd: 18) # # perf trace --max-events=2 -e syscalls:sys_enter_lseek --filter="whence==SET && offset != 0" 0.000 Cache2 I/O/12047 syscalls:sys_enter_lseek(fd: 277, offset: 43, whence: SET) 1142.070 mozStorage #5/12302 syscalls:sys_enter_lseek(fd: 44</home/acme/.mozilla/firefox/ina67tev.default/cookies.sqlite-wal>, offset: 393536, whence: SET) # perf annotate: - Fix objdump --no-show-raw-insn flag to work with goth gcc and clang. - Streamline objdump execution, preserving the right error codes for better reporting to user. perf report: - Add warning when libunwind not compiled in. perf stat: Jin Yao: - Support --all-kernel/--all-user, to match options available in 'perf record', asking that all the events specified work just with kernel or user events. perf list: Jin Yao: - Hide deprecated events by default, allow showing them with --deprecated. libbperf: Jiri Olsa: - Allow to build with -ltcmalloc. - Finish mmap interface, getting more stuff from tools/perf while adding abstractions to avoid pulling too much stuff, to get libperf to grow as tools needs things like auxtrace, etc. perf scripting engines: Steven Rostedt (VMware): - Iterate on tep event arrays directly, fixing script generation with '-g python' when having multiple tracepoints in a perf.data file. core: - Allow to build with -ltcmalloc. perf test: Leo Yan: - Report failure for mmap events. - Avoid infinite loop for task exit case. - Remove needless headers for bp_account test. - Add dedicated checking helper is_supported(). - Disable bp_signal testing for arm64. Vendor events: arm64: John Garry: - Fix Hisi hip08 DDRC PMU eventname. - Add some missing events for Hisi hip08 DDRC, L3C and HHA PMUs. Signed-off-by: Arnaldo Carvalho de Melo <[email protected]> Signed-off-by: Ingo Molnar <[email protected]>
2019-10-22Merge branch 'perf/urgent' into perf/core, to pick up fixesIngo Molnar12-17/+65
Signed-off-by: Ingo Molnar <[email protected]>
2019-10-19Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netLinus Torvalds8-18/+55
Pull networking fixes from David Miller: "I was battling a cold after some recent trips, so quite a bit piled up meanwhile, sorry about that. Highlights: 1) Fix fd leak in various bpf selftests, from Brian Vazquez. 2) Fix crash in xsk when device doesn't support some methods, from Magnus Karlsson. 3) Fix various leaks and use-after-free in rxrpc, from David Howells. 4) Fix several SKB leaks due to confusion of who owns an SKB and who should release it in the llc code. From Eric Biggers. 5) Kill a bunc of KCSAN warnings in TCP, from Eric Dumazet. 6) Jumbo packets don't work after resume on r8169, as the BIOS resets the chip into non-jumbo mode during suspend. From Heiner Kallweit. 7) Corrupt L2 header during MPLS push, from Davide Caratti. 8) Prevent possible infinite loop in tc_ctl_action, from Eric Dumazet. 9) Get register bits right in bcmgenet driver, based upon chip version. From Florian Fainelli. 10) Fix mutex problems in microchip DSA driver, from Marek Vasut. 11) Cure race between route lookup and invalidation in ipv4, from Wei Wang. 12) Fix performance regression due to false sharing in 'net' structure, from Eric Dumazet" * git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (145 commits) net: reorder 'struct net' fields to avoid false sharing net: dsa: fix switch tree list net: ethernet: dwmac-sun8i: show message only when switching to promisc net: aquantia: add an error handling in aq_nic_set_multicast_list net: netem: correct the parent's backlog when corrupted packet was dropped net: netem: fix error path for corrupted GSO frames macb: propagate errors when getting optional clocks xen/netback: fix error path of xenvif_connect_data() net: hns3: fix mis-counting IRQ vector numbers issue net: usb: lan78xx: Connect PHY before registering MAC vsock/virtio: discard packets if credit is not respected vsock/virtio: send a credit update when buffer size is changed mlxsw: spectrum_trap: Push Ethernet header before reporting trap net: ensure correct skb->tstamp in various fragmenters net: bcmgenet: reset 40nm EPHY on energy detect net: bcmgenet: soft reset 40nm EPHYs before MAC init net: phy: bcm7xxx: define soft_reset for 40nm EPHY net: bcmgenet: don't set phydev->link from MAC net: Update address for MediaTek ethernet driver in MAINTAINERS ipv4: fix race condition between route lookup and invalidation ...
2019-10-19perf trace: Use STUL_STRARRAY_FLAGS with mmapArnaldo Carvalho de Melo1-1/+3
The 'mmap' syscall has special needs so it doesn't use SCA_STRARRAY_FLAGS, see its implementation in syscall_arg__scnprintf_mmap_flags(), related to special handling of MAP_ANONYMOUS, so set ->parm to the strarray__mmap_flags and hook up with strarray__strtoul_flags manually, now we can filter by those or-ed string expressions: # perf trace -e syscalls:sys_enter_mmap sleep 1 0.000 syscalls:sys_enter_mmap(addr: NULL, len: 134346, prot: READ, flags: PRIVATE, fd: 3, off: 0) 0.026 syscalls:sys_enter_mmap(addr: NULL, len: 8192, prot: READ|WRITE, flags: PRIVATE|ANONYMOUS) 0.036 syscalls:sys_enter_mmap(addr: NULL, len: 1857472, prot: READ, flags: PRIVATE|DENYWRITE, fd: 3, off: 0) 0.046 syscalls:sys_enter_mmap(addr: 0x7fae003d9000, len: 1363968, prot: READ|EXEC, flags: PRIVATE|FIXED|DENYWRITE, fd: 3, off: 0x22000) 0.052 syscalls:sys_enter_mmap(addr: 0x7fae00526000, len: 311296, prot: READ, flags: PRIVATE|FIXED|DENYWRITE, fd: 3, off: 0x16f000) 0.055 syscalls:sys_enter_mmap(addr: 0x7fae00573000, len: 24576, prot: READ|WRITE, flags: PRIVATE|FIXED|DENYWRITE, fd: 3, off: 0x1bb000) 0.062 syscalls:sys_enter_mmap(addr: 0x7fae00579000, len: 14272, prot: READ|WRITE, flags: PRIVATE|FIXED|ANONYMOUS) 0.253 syscalls:sys_enter_mmap(addr: NULL, len: 217750512, prot: READ, flags: PRIVATE, fd: 3, off: 0) # # perf trace -e syscalls:sys_enter_mmap --filter="flags==PRIVATE|FIXED|DENYWRITE" sleep 1 0.000 syscalls:sys_enter_mmap(addr: 0x7f6ab3dcb000, len: 1363968, prot: READ|EXEC, flags: PRIVATE|FIXED|DENYWRITE, fd: 3, off: 0x22000) 0.010 syscalls:sys_enter_mmap(addr: 0x7f6ab3f18000, len: 311296, prot: READ, flags: PRIVATE|FIXED|DENYWRITE, fd: 3, off: 0x16f000) 0.014 syscalls:sys_enter_mmap(addr: 0x7f6ab3f65000, len: 24576, prot: READ|WRITE, flags: PRIVATE|FIXED|DENYWRITE, fd: 3, off: 0x1bb000) # perf trace -e syscalls:sys_enter_mmap --filter="flags==PRIVATE|ANONYMOUS" sleep 1 0.000 syscalls:sys_enter_mmap(addr: NULL, len: 8192, prot: READ|WRITE, flags: PRIVATE|ANONYMOUS) # # perf trace -v -e syscalls:sys_enter_mmap --filter="flags==PRIVATE|ANONYMOUS" sleep 1 |& grep "New filter" New filter for syscalls:sys_enter_mmap: flags==0x22 # Cc: Adrian Hunter <[email protected]> Cc: Andi Kleen <[email protected]> Cc: Brendan Gregg <[email protected]> Cc: David Ahern <[email protected]> Cc: Jiri Olsa <[email protected]> Cc: Luis Cláudio Gonçalves <[email protected]> Cc: Namhyung Kim <[email protected]> Link: https://lkml.kernel.org/n/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2019-10-19perf trace: Wire up strarray__strtoul_flags()Arnaldo Carvalho de Melo2-0/+9
Now anything that uses STRARRAY_FLAGS, like the 'fsmount' syscall will support mapping or-ed strings back to a value that can be used in a filter. In some cases, where STRARRAY_FLAGS isn't used but instead the scnprintf is a special one because of specific needs, like for mmap, then one has to set the ->pars to the strarray. See the next cset. Cc: Adrian Hunter <[email protected]> Cc: Andi Kleen <[email protected]> Cc: Brendan Gregg <[email protected]> Cc: David Ahern <[email protected]> Cc: Jiri Olsa <[email protected]> Cc: Luis Cláudio Gonçalves <[email protected]> Cc: Namhyung Kim <[email protected]> Link: https://lkml.kernel.org/n/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2019-10-19libbeauty: Introduce strarray__strtoul_flags()Arnaldo Carvalho de Melo2-1/+45
Counterpart of strarray__scnprintf_flags(), i.e. from a expression like: # perf trace -e syscalls:sys_enter_mmap --filter="flags==PRIVATE|FIXED|DENYWRITE" I.e. that "flags==PRIVATE|FIXED|DENYWRITE", turn that into # perf trace -e syscalls:sys_enter_mmap --filter=0x812 Cc: Adrian Hunter <[email protected]> Cc: Andi Kleen <[email protected]> Cc: Brendan Gregg <[email protected]> Cc: David Ahern <[email protected]> Cc: Jiri Olsa <[email protected]> Cc: Luis Cláudio Gonçalves <[email protected]> Cc: Namhyung Kim <[email protected]> Link: https://lkml.kernel.org/n/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2019-10-19libbeauty: Make the mmap_flags strarray visible outside of its beautifierArnaldo Carvalho de Melo1-2/+2
So that we can later use it with the strarray__strtoul_flags() routine that will be soon introduced. Cc: Adrian Hunter <[email protected]> Cc: Jiri Olsa <[email protected]> Cc: Luis Cláudio Gonçalves <[email protected]> Cc: Namhyung Kim <[email protected]> Link: https://lkml.kernel.org/n/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2019-10-19perf trace: Use strtoul for the fcntl 'cmd' argumentArnaldo Carvalho de Melo1-1/+2
Since its values are in two ranges of values we ended up codifying it using a 'struct strarrays', so now hook it up with STUL_STRARRAYS so that we can do: # perf trace -e syscalls:*enter_fcntl --filter=cmd==SETLK||cmd==SETLKW 0.000 sssd_kcm/19021 syscalls:sys_enter_fcntl(fd: 13</var/lib/sss/secrets/secrets.ldb>, cmd: SETLK, arg: 0x7ffcf0a4dee0) 1.523 sssd_kcm/19021 syscalls:sys_enter_fcntl(fd: 13</var/lib/sss/secrets/secrets.ldb>, cmd: SETLK, arg: 0x7ffcf0a4de90) 1.629 sssd_kcm/19021 syscalls:sys_enter_fcntl(fd: 13</var/lib/sss/secrets/secrets.ldb>, cmd: SETLK, arg: 0x7ffcf0a4de90) 2.711 sssd_kcm/19021 syscalls:sys_enter_fcntl(fd: 13</var/lib/sss/secrets/secrets.ldb>, cmd: SETLK, arg: 0x7ffcf0a4de70) ^C# Cc: Adrian Hunter <[email protected]> Cc: Andi Kleen <[email protected]> Cc: Brendan Gregg <[email protected]> Cc: David Ahern <[email protected]> Cc: Jiri Olsa <[email protected]> Cc: Luis Cláudio Gonçalves <[email protected]> Cc: Namhyung Kim <[email protected]> Link: https://lkml.kernel.org/n/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2019-10-19libbeauty: Introduce syscall_arg__strtoul_strarrays()Arnaldo Carvalho de Melo2-0/+8
To allow going from string to integer for 'struct strarrays'. Cc: Adrian Hunter <[email protected]> Cc: David Ahern <[email protected]> Cc: Jiri Olsa <[email protected]> Cc: Luis Cláudio Gonçalves <[email protected]> Cc: Namhyung Kim <[email protected]> Link: https://lkml.kernel.org/n/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2019-10-19libperf: Add pr_err() macroJiri Olsa2-0/+4
And missing include for "perf/core.h" header, which provides LIBPERF_* debug levels and add missing pr_err() support. Signed-off-by: Jiri Olsa <[email protected]> Cc: Alexander Shishkin <[email protected]> Cc: Alexey Budankov <[email protected]> Cc: Andi Kleen <[email protected]> Cc: Jin Yao <[email protected]> Cc: Michael Petlan <[email protected]> Cc: Namhyung Kim <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: Stephane Eranian <[email protected]> Link: http://lore.kernel.org/lkml/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2019-10-19libperf: Do not export perf_evsel__init()/perf_evlist__init()Jiri Olsa5-5/+2
There's no point in exporting perf_evsel__init()/perf_evlist__init(), it's called from perf_evsel__new()/perf_evlist__new() respectively. It's used only from perf where perf_evsel()/perf_evlist() is embedded perf's evsel/evlist. Signed-off-by: Jiri Olsa <[email protected]> Cc: Alexander Shishkin <[email protected]> Cc: Alexey Budankov <[email protected]> Cc: Andi Kleen <[email protected]> Cc: Jin Yao <[email protected]> Cc: Michael Petlan <[email protected]> Cc: Namhyung Kim <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: Stephane Eranian <[email protected]> Link: http://lore.kernel.org/lkml/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2019-10-19libperf: Keep count of failed testsJiri Olsa5-7/+21
Keep the count of failed tests, so we get better output with failures, like: # make tests ... running static: - running test-cpumap.c...OK - running test-threadmap.c...OK - running test-evlist.c...FAILED test-evlist.c:53 failed to create evsel2 FAILED test-evlist.c:163 failed to create evsel2 FAILED test-evlist.c:287 failed count FAILED (3) - running test-evsel.c...OK running dynamic: - running test-cpumap.c...OK - running test-threadmap.c...OK - running test-evlist.c...FAILED test-evlist.c:53 failed to create evsel2 FAILED test-evlist.c:163 failed to create evsel2 FAILED test-evlist.c:287 failed count FAILED (3) - running test-evsel.c...OK ... Signed-off-by: Jiri Olsa <[email protected]> Cc: Alexander Shishkin <[email protected]> Cc: Alexey Budankov <[email protected]> Cc: Andi Kleen <[email protected]> Cc: Jin Yao <[email protected]> Cc: Michael Petlan <[email protected]> Cc: Namhyung Kim <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: Stephane Eranian <[email protected]> Link: http://lore.kernel.org/lkml/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2019-10-19libperf: Add tests_mmap_cpus testJiri Olsa1-0/+98
Add mmaping tests that generates prctl call on every cpu validates it gets all the related events in ring buffer. Committer testing: # make -C tools/perf/lib tests make: Entering directory '/home/acme/git/perf/tools/perf/lib' LINK test-cpumap-a LINK test-threadmap-a LINK test-evlist-a LINK test-evsel-a LINK test-cpumap-so LINK test-threadmap-so LINK test-evlist-so LINK test-evsel-so running static: - running test-cpumap.c...OK - running test-threadmap.c...OK - running test-evlist.c...OK - running test-evsel.c...OK running dynamic: - running test-cpumap.c...OK - running test-threadmap.c...OK - running test-evlist.c...OK - running test-evsel.c...OK make: Leaving directory '/home/acme/git/perf/tools/perf/lib' # Signed-off-by: Jiri Olsa <[email protected]> Tested-by: Arnaldo Carvalho de Melo <[email protected]> Cc: Alexander Shishkin <[email protected]> Cc: Alexey Budankov <[email protected]> Cc: Andi Kleen <[email protected]> Cc: Jin Yao <[email protected]> Cc: Michael Petlan <[email protected]> Cc: Namhyung Kim <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: Stephane Eranian <[email protected]> Link: http://lore.kernel.org/lkml/[email protected] [ Added _GNU_SOURCE define for sched.h to get sched_[gs]et_affinity Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2019-10-19libperf: Add tests_mmap_thread testJiri Olsa1-0/+119
Add mmaping tests that generates 100 prctl calls in monitored child process and validates it gets 100 events in ring buffer. Committer tests: # make -C tools/perf/lib tests make: Entering directory '/home/acme/git/perf/tools/perf/lib' LINK test-cpumap-a LINK test-threadmap-a LINK test-evlist-a LINK test-evsel-a LINK test-cpumap-so LINK test-threadmap-so LINK test-evlist-so LINK test-evsel-so running static: - running test-cpumap.c...OK - running test-threadmap.c...OK - running test-evlist.c...OK - running test-evsel.c...OK running dynamic: - running test-cpumap.c...OK - running test-threadmap.c...OK - running test-evlist.c...OK - running test-evsel.c...OK make: Leaving directory '/home/acme/git/perf/tools/perf/lib' # Signed-off-by: Jiri Olsa <[email protected]> Tested-by: Arnaldo Carvalho de Melo <[email protected]> Cc: Alexander Shishkin <[email protected]> Cc: Alexey Budankov <[email protected]> Cc: Andi Kleen <[email protected]> Cc: Jin Yao <[email protected]> Cc: Michael Petlan <[email protected]> Cc: Namhyung Kim <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: Stephane Eranian <[email protected]> Link: http://lore.kernel.org/lkml/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2019-10-19libperf: Link static tests with libapi.aJiri Olsa2-3/+4
Both static and dynamic tests needs to link with libapi.a, because it's using its functions. Also include path for libapi includes. Signed-off-by: Jiri Olsa <[email protected]> Cc: Alexander Shishkin <[email protected]> Cc: Alexey Budankov <[email protected]> Cc: Andi Kleen <[email protected]> Cc: Jin Yao <[email protected]> Cc: Michael Petlan <[email protected]> Cc: Namhyung Kim <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: Stephane Eranian <[email protected]> Link: http://lore.kernel.org/lkml/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2019-10-19libperf: Move mask setup to perf_evlist__mmap_ops()Jiri Olsa2-2/+2
Move the mask setup to perf_evlist__mmap_ops(), because it's the same on both perf and libperf path. Signed-off-by: Jiri Olsa <[email protected]> Cc: Alexander Shishkin <[email protected]> Cc: Alexey Budankov <[email protected]> Cc: Andi Kleen <[email protected]> Cc: Jin Yao <[email protected]> Cc: Michael Petlan <[email protected]> Cc: Namhyung Kim <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: Stephane Eranian <[email protected]> Link: http://lore.kernel.org/lkml/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2019-10-19libperf: Move mmap allocation to perf_evlist__mmap_ops::getJiri Olsa2-32/+34
Move allocation of the mmap array into perf_evlist__mmap_ops::get, to centralize the mmap allocation. Also move nr_mmap setup to perf_evlist__mmap_ops so it's centralized and shared by both perf and libperf mmap code. Signed-off-by: Jiri Olsa <[email protected]> Cc: Alexander Shishkin <[email protected]> Cc: Alexey Budankov <[email protected]> Cc: Andi Kleen <[email protected]> Cc: Jin Yao <[email protected]> Cc: Michael Petlan <[email protected]> Cc: Namhyung Kim <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: Stephane Eranian <[email protected]> Link: http://lore.kernel.org/lkml/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2019-10-19libperf: Introduce perf_evlist__for_each_mmap()Jiri Olsa7-6/+47
Add the perf_evlist__for_each_mmap() function and export it in the perf/evlist.h header, so that the user can iterate through 'struct perf_mmap' objects. Add a internal perf_mmap__link() function to do the actual linking. Signed-off-by: Jiri Olsa <[email protected]> Cc: Alexander Shishkin <[email protected]> Cc: Alexey Budankov <[email protected]> Cc: Andi Kleen <[email protected]> Cc: Jin Yao <[email protected]> Cc: Michael Petlan <[email protected]> Cc: Namhyung Kim <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: Stephane Eranian <[email protected]> Link: http://lore.kernel.org/lkml/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2019-10-19perf tests: Disable bp_signal testing for arm64Leo Yan1-9/+6
As there are several discussions for enabling perf breakpoint signal testing on arm64 platform: arm64 needs to rely on single-step to execute the breakpointed instruction and then reinstall the breakpoint exception handler. But if we hook the breakpoint with a signal, the signal handler will do the stepping rather than the breakpointed instruction, this causes infinite loops as below: Kernel space | Userspace ---------------------------------|-------------------------------- | __test_function() -> hit | breakpoint breakpoint_handler() | `-> user_enable_single_step() | do_signal() | | sig_handler() -> Step one | instruction and | trap to kernel single_step_handler() | `-> reinstall_suspended_bps() | | __test_function() -> hit | breakpoint again and | repeat up flow infinitely As Will Deacon mentioned [1]: "that we require the overflow handler to do the stepping on arm/arm64, which is relied upon by GDB/ptrace. The hw_breakpoint code is a complete disaster so my preference would be to rip out the perf part and just implement something directly in ptrace, but it's a pretty horrible job". Though Will commented this on arm architecture, but the comment also can apply on arm64 architecture. For complete information, I searched online and found a few years back, Wang Nan sent one patch 'arm64: Store breakpoint single step state into pstate' [2]; the patch tried to resolve this issue by avoiding single stepping in signal handler and defer to enable the signal stepping when return to __test_function(). The fixing was not merged due to the concern for missing to handle different usage cases. Based on the info, the most feasible way is to skip Perf breakpoint signal testing for arm64 and this could avoid the duplicate investigation efforts when people see the failure. This patch skips this case on arm64 platform, which is same with arm architecture. [1] https://lkml.org/lkml/2018/11/15/205 [2] https://lkml.org/lkml/2015/12/23/477 Signed-off-by: Leo Yan <[email protected]> Cc: Adrian Hunter <[email protected]> Cc: Alexander Shishkin <[email protected]> Cc: Brajeswar Ghosh <[email protected]> Cc: Florian Fainelli <[email protected]> Cc: Jiri Olsa <[email protected]> Cc: Mark Rutland <[email protected]> Cc: Michael Petlan <[email protected]> Cc: Namhyung Kim <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: Song Liu <[email protected]> Cc: Souptick Joarder <[email protected]> Cc: Will Deacon <[email protected]> Link: http://lore.kernel.org/lkml/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2019-10-19perf tests bp_account: Add dedicated checking helper is_supported()Leo Yan3-1/+18
The arm architecture supports breakpoint accounting but it doesn't support breakpoint overflow signal handling. The current code uses the same checking helper, thus it disables both testings (bp_account and bp_signal) for arm platform. For handling two testings separately, this patch adds a dedicated checking helper is_supported() for breakpoint accounting testing, thus it allows supporting breakpoint accounting testing on arm platform; the old helper test__bp_signal_is_supported() is only used to checking for breakpoint overflow signal testing. Signed-off-by: Leo Yan <[email protected]> Cc: Adrian Hunter <[email protected]> Cc: Alexander Shishkin <[email protected]> Cc: Brajeswar Ghosh <[email protected]> Cc: Florian Fainelli <[email protected]> Cc: Jiri Olsa <[email protected]> Cc: Mark Rutland <[email protected]> Cc: Michael Petlan <[email protected]> Cc: Namhyung Kim <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: Song Liu <[email protected]> Cc: Souptick Joarder <[email protected]> Cc: Will Deacon <[email protected]> Link: http://lore.kernel.org/lkml/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2019-10-19perf tests: Remove needless headers for bp_accountLeo Yan1-4/+0
A few headers are not needed and were introduced by copying from other test file. This patch removes the needless headers for the breakpoint accounting testing. Signed-off-by: Leo Yan <[email protected]> Cc: Adrian Hunter <[email protected]> Cc: Alexander Shishkin <[email protected]> Cc: Brajeswar Ghosh <[email protected]> Cc: Florian Fainelli <[email protected]> Cc: Jiri Olsa <[email protected]> Cc: Mark Rutland <[email protected]> Cc: Michael Petlan <[email protected]> Cc: Namhyung Kim <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: Song Liu <[email protected]> Cc: Souptick Joarder <[email protected]> Cc: Will Deacon <[email protected]> Link: http://lore.kernel.org/lkml/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2019-10-19perf list: Hide deprecated events by defaultJin Yao9-19/+55
There are some deprecated events listed by perf list. But we can't remove them from perf list with ease because some old scripts may use them. Deprecated events are old names of renamed events. When an event gets renamed the old name is kept around for some time and marked with Deprecated. The newer Intel event lists in the tree already have these headers. So we need to keep them in the event list, but provide a new option to show them. The new option is "--deprecated". With this patch, the deprecated events are hidden by default but they can be displayed when option "--deprecated" is enabled. Signed-off-by: Jin Yao <[email protected]> Acked-by: Jiri Olsa <[email protected]> Cc: Alexander Shishkin <[email protected]> Cc: Andi Kleen <[email protected]> Cc: Jin Yao <[email protected]> Cc: Kan Liang <[email protected]> Cc: Peter Zijlstra <[email protected]> Link: http://lore.kernel.org/lkml/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2019-10-19perf trace: Pass a syscall_arg to syscall_arg_fmt->strtoul()Arnaldo Carvalho de Melo1-1/+5
With just what we need for the STUL_STRARRAY, i.e. the 'struct strarray' pointer to be used, just like with syscall_arg_fmt->scnprintf() for the other direction (number -> string). With this all the strarrays that are associated with syscalls can be used with '-e syscalls:sys_enter_SYSCALLNAME --filter', and soon will be possible as well to use with the strace-like shorter form, with just the syscall names, i.e. something like: -e lseek/whence==END/ For now we have to use the longer form: # perf trace -e syscalls:sys_enter_lseek 0.000 pool/2242 syscalls:sys_enter_lseek(fd: 14<anon_inode:[timerfd]>, offset: 0, whence: CUR) 0.031 pool/2242 syscalls:sys_enter_lseek(fd: 15<anon_inode:[timerfd]>, offset: 0, whence: CUR) 0.046 pool/2242 syscalls:sys_enter_lseek(fd: 16<anon_inode:[timerfd]>, offset: 0, whence: CUR) 5003.528 pool/2242 syscalls:sys_enter_lseek(fd: 14<anon_inode:[timerfd]>, offset: 0, whence: CUR) 5003.575 pool/2242 syscalls:sys_enter_lseek(fd: 15<anon_inode:[timerfd]>, offset: 0, whence: CUR) 5003.593 pool/2242 syscalls:sys_enter_lseek(fd: 16<anon_inode:[timerfd]>, offset: 0, whence: CUR) 10002.017 pool/2242 syscalls:sys_enter_lseek(fd: 14<anon_inode:[timerfd]>, offset: 0, whence: CUR) 10002.051 pool/2242 syscalls:sys_enter_lseek(fd: 15<anon_inode:[timerfd]>, offset: 0, whence: CUR) 10002.068 pool/2242 syscalls:sys_enter_lseek(fd: 16<anon_inode:[timerfd]>, offset: 0, whence: CUR) ^C# perf trace -e syscalls:sys_enter_lseek --filter="whence!=CUR" 0.000 sshd/24476 syscalls:sys_enter_lseek(fd: 3, offset: 9032, whence: SET) 0.060 sshd/24476 syscalls:sys_enter_lseek(fd: 3</usr/lib64/libcrypt.so.2.0.0>, offset: 9032, whence: SET) 0.187 sshd/24476 syscalls:sys_enter_lseek(fd: 3</usr/lib64/libcrypt.so.2.0.0>, offset: 118632, whence: SET) 0.203 sshd/24476 syscalls:sys_enter_lseek(fd: 3</usr/lib64/libcrypt.so.2.0.0>, offset: 118632, whence: SET) 0.349 sshd/24476 syscalls:sys_enter_lseek(fd: 3</usr/lib64/libcrypt.so.2.0.0>, offset: 61936, whence: SET) ^C# And for those curious about what are those lseek(DSO, offset, SET), well, its the loader: # perf trace -e syscalls:sys_enter_lseek/max-stack=16/ --filter="whence!=CUR" 0.000 sshd/24495 syscalls:sys_enter_lseek(fd: 3</usr/lib64/libgcrypt.so.20.2.5>, offset: 9032, whence: SET) __libc_lseek64 (/usr/lib64/ld-2.29.so) _dl_map_object (/usr/lib64/ld-2.29.so) 0.067 sshd/24495 syscalls:sys_enter_lseek(fd: 3</usr/lib64/libgcrypt.so.20.2.5>, offset: 9032, whence: SET) __libc_lseek64 (/usr/lib64/ld-2.29.so) _dl_map_object_from_fd (/usr/lib64/ld-2.29.so) _dl_map_object (/usr/lib64/ld-2.29.so) 0.198 sshd/24495 syscalls:sys_enter_lseek(fd: 3</usr/lib64/libgcrypt.so.20.2.5>, offset: 118632, whence: SET) __libc_lseek64 (/usr/lib64/ld-2.29.so) _dl_map_object (/usr/lib64/ld-2.29.so) 0.219 sshd/24495 syscalls:sys_enter_lseek(fd: 3</usr/lib64/libgcrypt.so.20.2.5>, offset: 118632, whence: SET) __libc_lseek64 (/usr/lib64/ld-2.29.so) _dl_map_object_from_fd (/usr/lib64/ld-2.29.so) _dl_map_object (/usr/lib64/ld-2.29.so) ^C# :-) With this we can use strings in strarrays in filters, which allows us to reuse all these that are in place for syscalls: $ find tools/perf/trace/beauty/ -name "*.c" | xargs grep -w DEFINE_STRARRAY tools/perf/trace/beauty/fcntl.c: static DEFINE_STRARRAY(fcntl_setlease, "F_"); tools/perf/trace/beauty/mmap.c: static DEFINE_STRARRAY(mmap_flags, "MAP_"); tools/perf/trace/beauty/mmap.c: static DEFINE_STRARRAY(madvise_advices, "MADV_"); tools/perf/trace/beauty/sync_file_range.c: static DEFINE_STRARRAY(sync_file_range_flags, "SYNC_FILE_RANGE_"); tools/perf/trace/beauty/socket.c: static DEFINE_STRARRAY(socket_ipproto, "IPPROTO_"); tools/perf/trace/beauty/mount_flags.c: static DEFINE_STRARRAY(mount_flags, "MS_"); tools/perf/trace/beauty/pkey_alloc.c: static DEFINE_STRARRAY(pkey_alloc_access_rights, "PKEY_"); tools/perf/trace/beauty/sockaddr.c:DEFINE_STRARRAY(socket_families, "PF_"); tools/perf/trace/beauty/tracepoints/x86_irq_vectors.c:static DEFINE_STRARRAY(x86_irq_vectors, "_VECTOR"); tools/perf/trace/beauty/tracepoints/x86_msr.c:static DEFINE_STRARRAY(x86_MSRs, "MSR_"); tools/perf/trace/beauty/prctl.c: static DEFINE_STRARRAY(prctl_options, "PR_"); tools/perf/trace/beauty/prctl.c: static DEFINE_STRARRAY(prctl_set_mm_options, "PR_SET_MM_"); tools/perf/trace/beauty/fspick.c: static DEFINE_STRARRAY(fspick_flags, "FSPICK_"); tools/perf/trace/beauty/ioctl.c: static DEFINE_STRARRAY(ioctl_tty_cmd, ""); tools/perf/trace/beauty/ioctl.c: static DEFINE_STRARRAY(drm_ioctl_cmds, ""); tools/perf/trace/beauty/ioctl.c: static DEFINE_STRARRAY(sndrv_pcm_ioctl_cmds, ""); tools/perf/trace/beauty/ioctl.c: static DEFINE_STRARRAY(sndrv_ctl_ioctl_cmds, ""); tools/perf/trace/beauty/ioctl.c: static DEFINE_STRARRAY(kvm_ioctl_cmds, ""); tools/perf/trace/beauty/ioctl.c: static DEFINE_STRARRAY(vhost_virtio_ioctl_cmds, ""); tools/perf/trace/beauty/ioctl.c: static DEFINE_STRARRAY(vhost_virtio_ioctl_read_cmds, ""); tools/perf/trace/beauty/ioctl.c: static DEFINE_STRARRAY(perf_ioctl_cmds, ""); tools/perf/trace/beauty/ioctl.c: static DEFINE_STRARRAY(usbdevfs_ioctl_cmds, ""); tools/perf/trace/beauty/fsmount.c: static DEFINE_STRARRAY(fsmount_attr_flags, "MOUNT_ATTR_"); tools/perf/trace/beauty/renameat.c: static DEFINE_STRARRAY(rename_flags, "RENAME_"); tools/perf/trace/beauty/kcmp.c: static DEFINE_STRARRAY(kcmp_types, "KCMP_"); tools/perf/trace/beauty/move_mount.c: static DEFINE_STRARRAY(move_mount_flags, "MOVE_MOUNT_"); $ Well, some, as the mmap flags are like: $ tools/perf/trace/beauty/mmap_flags.sh static const char *mmap_flags[] = { [ilog2(0x40) + 1] = "32BIT", [ilog2(0x01) + 1] = "SHARED", [ilog2(0x02) + 1] = "PRIVATE", [ilog2(0x10) + 1] = "FIXED", [ilog2(0x20) + 1] = "ANONYMOUS", [ilog2(0x008000) + 1] = "POPULATE", [ilog2(0x010000) + 1] = "NONBLOCK", [ilog2(0x020000) + 1] = "STACK", [ilog2(0x040000) + 1] = "HUGETLB", [ilog2(0x080000) + 1] = "SYNC", [ilog2(0x100000) + 1] = "FIXED_NOREPLACE", [ilog2(0x0100) + 1] = "GROWSDOWN", [ilog2(0x0800) + 1] = "DENYWRITE", [ilog2(0x1000) + 1] = "EXECUTABLE", [ilog2(0x2000) + 1] = "LOCKED", [ilog2(0x4000) + 1] = "NORESERVE", }; $ So we'll need a strarray__strtoul_flags() that will break donw the flags into tokens separated by '|' before doing the lookup and then go on reconstructing the value from, say: # perf trace -e syscalls:sys_enter_mmap --filter="flags==PRIVATE|FIXED|DENYWRITE" into: # perf trace -e syscalls:sys_enter_mmap --filter="flags==0x2|0x10|0x0800" and finally into: # perf trace -e syscalls:sys_enter_mmap --filter="flags==0x812" That is what we see if we don't use the augmented view obtained from: # perf trace -e mmap <SNIP> 211792.885 procmail/15393 mmap(addr: 0x7fcd11645000, len: 8192, prot: READ, flags: PRIVATE|FIXED|DENYWRITE, fd: 8, off: 0xa000) = 0x7fcd11645000 <SNIP> But plain use tracefs: procmail-15559 [000] .... 54557.178262: sys_mmap(addr: 7f5c9bf7a000, len: 9b000, prot: 1, flags: 812, fd: 3, off: a9000) Cc: Adrian Hunter <[email protected]> Cc: Andi Kleen <[email protected]> Cc: Brendan Gregg <[email protected]> Cc: David Ahern <[email protected]> Cc: Jiri Olsa <[email protected]> Cc: Luis Cláudio Gonçalves <[email protected]> Cc: Namhyung Kim <[email protected]> Link: https://lkml.kernel.org/n/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2019-10-19mm/gup_benchmark: add a missing "w" to getopt stringJohn Hubbard1-1/+1
Even though gup_benchmark.c has code to handle the -w command-line option, the "w" is not part of the getopt string. It looks as if it has been missing the whole time. On my machine, this leads naturally to the following predictable result: $ sudo ./gup_benchmark -w ./gup_benchmark: invalid option -- 'w' ...which is fixed with this commit. Link: http://lkml.kernel.org/r/[email protected] Signed-off-by: John Hubbard <[email protected]> Acked-by: Kirill A. Shutemov <[email protected]> Cc: Keith Busch <[email protected]> Cc: Shuah Khan <[email protected]> Cc: Christoph Hellwig <[email protected]> Cc: "Aneesh Kumar K . V" <[email protected]> Cc: Ira Weiny <[email protected]> Cc: Christoph Hellwig <[email protected]> Cc: kbuild test robot <[email protected]> Signed-off-by: Andrew Morton <[email protected]> Signed-off-by: Linus Torvalds <[email protected]>
2019-10-18perf trace: Honour --max-events in processing syscalls:sys_enter_*Arnaldo Carvalho de Melo1-6/+7
We were doing this only at the sys_exit syscall tracepoint, as for strace-like we count the pair of sys_enter and sys_exit as one event, but when asking specifically for a the syscalls:sys_enter_NAME tracepoint we need to count each of those as an event. I.e. things like: # perf trace --max-events=4 -e syscalls:sys_enter_lseek 0.000 pool/2242 syscalls:sys_enter_lseek(fd: 14<anon_inode:[timerfd]>, offset: 0, whence: CUR) 0.034 pool/2242 syscalls:sys_enter_lseek(fd: 15<anon_inode:[timerfd]>, offset: 0, whence: CUR) 0.051 pool/2242 syscalls:sys_enter_lseek(fd: 16<anon_inode:[timerfd]>, offset: 0, whence: CUR) 2307.900 sshd/30800 syscalls:sys_enter_lseek(fd: 3</usr/lib64/libsystemd.so.0.25.0>, offset: 9032, whence: SET) # Were going on forever, since we only had sys_enter events. Cc: Adrian Hunter <[email protected]> Cc: David Ahern <[email protected]> Cc: Jiri Olsa <[email protected]> Cc: Luis Cláudio Gonçalves <[email protected]> Cc: Namhyung Kim <[email protected]> Link: https://lkml.kernel.org/n/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2019-10-18libbeauty: Introduce syscall_arg__strtoul_strarray()Arnaldo Carvalho de Melo2-0/+9
To go from strarrays strings to its indexes. Cc: Adrian Hunter <[email protected]> Cc: David Ahern <[email protected]> Cc: Jiri Olsa <[email protected]> Cc: Luis Cláudio Gonçalves <[email protected]> Cc: Namhyung Kim <[email protected]> Link: https://lkml.kernel.org/n/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2019-10-18perf tools: Remove unused trace_find_next_event()Steven Rostedt (VMware)2-33/+0
trace_find_next_event() was buggy and pretty much a useless helper. As there are no more users, just remove it. Signed-off-by: Steven Rostedt (VMware) <[email protected]> Cc: Andrew Morton <[email protected]> Cc: Jiri Olsa <[email protected]> Cc: Namhyung Kim <[email protected]> Cc: Tzvetomir Stoyanov <[email protected]> Cc: [email protected] Link: http://lore.kernel.org/lkml/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2019-10-18perf scripting engines: Iterate on tep event arrays directlySteven Rostedt (VMware)2-4/+13
Instead of calling a useless (and broken) helper function to get the next event of a tep event array, just get the array directly and iterate over it. Note, the broken part was from trace_find_next_event() which after this will no longer be used, and can be removed. Committer notes: This fixes a segfault when generating python scripts from perf.data files with multiple tracepoint events, i.e. the following use case is fixed by this patch: # perf record -e sched:* sleep 1 [ perf record: Woken up 31 times to write data ] [ perf record: Captured and wrote 0.031 MB perf.data (9 samples) ] # perf script -g python Segmentation fault (core dumped) # Reported-by: Daniel Bristot de Oliveira <[email protected]> Signed-off-by: Steven Rostedt (VMware) <[email protected]> Tested-by: Arnaldo Carvalho de Melo <[email protected]> Cc: Andrew Morton <[email protected]> Cc: Jiri Olsa <[email protected]> Cc: Namhyung Kim <[email protected]> Cc: Tzvetomir Stoyanov <[email protected]> Cc: [email protected] Link: http://lkml.kernel.org/r/[email protected] Link: http://lore.kernel.org/lkml/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2019-10-18perf trace: Initialize evsel_trace->fmt for syscalls:sys_enter_* tracepointsArnaldo Carvalho de Melo1-0/+23
From the syscall_fmts->arg entries for formatting strace-like syscalls. This is when resolving the string "whence" on a filter expression for the syscalls:sys_enter_lseek: Breakpoint 3, perf_evsel__syscall_arg_fmt (evsel=0xc91ed0, arg=0x7fffffff7cd0 "whence") at builtin-trace.c:3626 3626 { (gdb) n 3628 struct syscall_arg_fmt *fmt = __evsel__syscall_arg_fmt(evsel); (gdb) n 3630 if (evsel->tp_format == NULL || fmt == NULL) (gdb) n 3633 for (field = evsel->tp_format->format.fields; field; field = field->next, ++fmt) (gdb) n 3634 if (strcmp(field->name, arg) == 0) (gdb) p field->name $3 = 0xc945e0 "__syscall_nr" (gdb) n 3633 for (field = evsel->tp_format->format.fields; field; field = field->next, ++fmt) (gdb) p *fmt $4 = {scnprintf = 0x0, strtoul = 0x0, mask_val = 0x0, parm = 0x0, name = 0x0, nr_entries = 0, show_zero = false} (gdb) n 3634 if (strcmp(field->name, arg) == 0) (gdb) p field->name $5 = 0xc94690 "fd" (gdb) n 3633 for (field = evsel->tp_format->format.fields; field; field = field->next, ++fmt) (gdb) n 3634 if (strcmp(field->name, arg) == 0) (gdb) n 3633 for (field = evsel->tp_format->format.fields; field; field = field->next, ++fmt) (gdb) n 3634 if (strcmp(field->name, arg) == 0) (gdb) p *fmt $9 = {scnprintf = 0x489be2 <syscall_arg__scnprintf_strarray>, strtoul = 0x0, mask_val = 0x0, parm = 0xa2da80 <strarray.whences>, name = 0x0, nr_entries = 0, show_zero = false} (gdb) p field->name $10 = 0xc947b0 "whence" (gdb) p fmt->parm $11 = (void *) 0xa2da80 <strarray.whences> (gdb) p *(struct strarray *)fmt->parm $12 = {offset = 0, nr_entries = 5, prefix = 0x724d37 "SEEK_", entries = 0xa2da40 <whences>} (gdb) p (struct strarray *)fmt->parm)->entries Junk after end of expression. (gdb) p ((struct strarray *)fmt->parm)->entries $13 = (const char **) 0xa2da40 <whences> (gdb) p ((struct strarray *)fmt->parm)->entries[0] $14 = 0x724d21 "SET" (gdb) p ((struct strarray *)fmt->parm)->entries[1] $15 = 0x724d25 "CUR" (gdb) p ((struct strarray *)fmt->parm)->entries[2] $16 = 0x724d29 "END" (gdb) p ((struct strarray *)fmt->parm)->entries[2] $17 = 0x724d29 "END" (gdb) p ((struct strarray *)fmt->parm)->entries[3] $18 = 0x724d2d "DATA" (gdb) p ((struct strarray *)fmt->parm)->entries[4] $19 = 0x724d32 "HOLE" (gdb) Cc: Adrian Hunter <[email protected]> Cc: David Ahern <[email protected]> Cc: Jiri Olsa <[email protected]> Cc: Luis Cláudio Gonçalves <[email protected]> Cc: Namhyung Kim <[email protected]> Link: https://lkml.kernel.org/n/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2019-10-17perf trace: Introduce 'struct evsel__trace' for evsel->priv needsArnaldo Carvalho de Melo1-6/+48
For syscalls we need to cache the 'syscall_id' and 'ret' field offsets but as well have a pointer to the syscall_fmt_arg array for the fields, so that we can expand strings in filter expressions, so introduce a 'struct evsel_trace' to have in evsel->priv that allows for that. Cc: Adrian Hunter <[email protected]> Cc: David Ahern <[email protected]> Cc: Jiri Olsa <[email protected]> Cc: Luis Cláudio Gonçalves <[email protected]> Cc: Namhyung Kim <[email protected]> Link: https://lkml.kernel.org/n/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2019-10-17perf trace: Hide evsel->access further, simplify codeArnaldo Carvalho de Melo1-26/+31
Next step will be to have a 'struct evsel_trace' to allow for handling the syscalls tracepoints via the strace-like code while reusing parts of that code with the other tracepoints, where we don't have things like the 'syscall_nr' or 'ret' ((raw_)?syscalls:sys_{enter,exit}(_SYSCALL)?) args that we want to cache offsets and have been using evsel->priv for that, while for the other tracepoints we'll have just an array of 'struct syscall_arg_fmt' (i.e. ->scnprint() for number->string and ->strtoul() string->number conversions and other state those functions need). Cc: Adrian Hunter <[email protected]> Cc: David Ahern <[email protected]> Cc: Jiri Olsa <[email protected]> Cc: Luis Cláudio Gonçalves <[email protected]> Cc: Namhyung Kim <[email protected]> Link: https://lkml.kernel.org/n/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2019-10-17perf trace: Introduce accessors to trace specific evsel->privArnaldo Carvalho de Melo1-11/+32
We're using evsel->priv in syscalls:sys_{enter,exit}_SYSCALL and in raw_syscalls:sys_{enter,exit} to cache the offset of the common fields, the multiplexor id/syscall_id in the sys_enter case and syscall_id + ret for sys_exit. And for the rest of the tracepoints we use it to have a syscall_arg_fmt array to have scnprintf/strtoul for tracepoint args. So we better clearly mark them with accessors so that we can move to having a 'struct evsel_trace' struct for all 'perf trace' specific evsel->priv usage. Cc: Adrian Hunter <[email protected]> Cc: Jiri Olsa <[email protected]> Cc: Luis Cláudio Gonçalves <[email protected]> Cc: Namhyung Kim <[email protected]> Link: https://lkml.kernel.org/n/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2019-10-17perf trace: Show error message when not finding a field used in a filter ↵Arnaldo Carvalho de Melo1-2/+2
expression It was there, but as pr_debug(), make it pr_err() so that we can see it without -v: # trace -e syscalls:*lseek --filter="whenc==SET" sleep 1 "whenc" not found in "syscalls:sys_enter_lseek", can't set filter "whenc==SET" # Cc: Adrian Hunter <[email protected]> Cc: David Ahern <[email protected]> Cc: Jiri Olsa <[email protected]> Cc: Luis Cláudio Gonçalves <[email protected]> Cc: Namhyung Kim <[email protected]> Link: https://lkml.kernel.org/n/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2019-10-16perf kmem: Fix memory leak in compact_gfp_flags()Yunfeng Ye1-0/+1
The memory @orig_flags is allocated by strdup(), it is freed on the normal path, but leak to free on the error path. Fix this by adding free(orig_flags) on the error path. Fixes: 0e11115644b3 ("perf kmem: Print gfp flags in human readable string") Signed-off-by: Yunfeng Ye <[email protected]> Cc: Alexander Shishkin <[email protected]> Cc: Feilong Lin <[email protected]> Cc: Hu Shiyuan <[email protected]> Cc: Jiri Olsa <[email protected]> Cc: Mark Rutland <[email protected]> Cc: Namhyung Kim <[email protected]> Cc: Peter Zijlstra <[email protected]> Link: http://lore.kernel.org/lkml/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
Powered by cgit, Gruvboxed by Blaster4385.