aboutsummaryrefslogtreecommitdiff
path: root/tools
AgeCommit message (Collapse)AuthorFilesLines
2017-06-16objtool: Add fortify_panic as __noreturn functionKees Cook1-1/+2
CONFIG_FORTIFY_SOURCE=y implements fortify_panic() as a __noreturn function, so objtool needs to know about it too. Suggested-by: Daniel Micay <[email protected]> Tested-by: Stephen Rothwell <[email protected]> Signed-off-by: Kees Cook <[email protected]> Signed-off-by: Josh Poimboeuf <[email protected]> Cc: Linus Torvalds <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: Thomas Gleixner <[email protected]> Link: http://lkml.kernel.org/r/[email protected] Signed-off-by: Ingo Molnar <[email protected]>
2017-06-15kselftest: membarrier: make test names more informativeAlice Ferrazzi1-2/+2
Make membarrier test names more informative. Signed-off-by: Alice Ferrazzi <[email protected]> Signed-off-by: Paul Elder <[email protected]> Signed-off-by: Shuah Khan <[email protected]>
2017-06-15kselftest: make callers of ksft_exit_skip() output the reason for skippingPaul Elder3-8/+6
Make the three tests that did use the old ksft_ext_skip() (breakpoints/breakpoint_test_arm64, breakpoints/step_after_suspend_test, and membarrier_test) use the new one, with an output for the reason for skipping all the tests. Signed-off-by: Paul Elder <[email protected]> Signed-off-by: Shuah Khan <[email protected]>
2017-06-15kselftest: make ksft_exit_skip() output a reason for skippingPaul Elder1-2/+5
Make ksft_exit_skip() input an optional message string as the reason for skipping all the tests and outputs it prior to exiting. Signed-off-by: Paul Elder <[email protected]> Signed-off-by: Shuah Khan <[email protected]>
2017-06-15tools/testing/nvdimm: fix nfit_test buffer overflowYasunori Goto1-1/+1
The root cause of panic is the num_pm of nfit_test1 is wrong. Though 1 is specified for num_pm at nfit_test_init(), it must be 2, because nfit_test1->spa_set[] array has 2 elements. Since the array is smaller than expected, the driver breaks other area. (it is often the link list of devres). As a result, panic occurs like the following example. CPU: 4 PID: 2233 Comm: lt-libndctl Tainted: G O 4.12.0-rc1+ #12 RIP: 0010:__list_del_entry_valid+0x6c/0xa0 Call Trace: release_nodes+0x76/0x260 devres_release_all+0x3c/0x50 device_release_driver_internal+0x159/0x200 device_release_driver+0x12/0x20 bus_remove_device+0xfd/0x170 device_del+0x1e8/0x330 platform_device_del+0x28/0x90 platform_device_unregister+0x12/0x30 nfit_test_exit+0x2a/0x93b [nfit_test] Cc: <[email protected]> Signed-off-by: Yasunori Goto <[email protected]> Signed-off-by: Dan Williams <[email protected]>
2017-06-15Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller22-167/+268
The conflicts were two cases of overlapping changes in batman-adv and the qed driver. Signed-off-by: David S. Miller <[email protected]>
2017-06-15Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds1-11/+30
Pull networking fixes from David Miller: 1) The netlink attribute passed in to dev_set_alias() is not necessarily NULL terminated, don't use strlcpy() on it. From Alexander Potapenko. 2) Fix implementation of atomics in arm64 bpf JIT, from Daniel Borkmann. 3) Correct the release of netdevs and driver private data in certain circumstances. 4) Sanitize netlink message length properly in decnet, from Mateusz Jurczyk. 5) Don't leak kernel data in rtnl_fill_vfinfo() netlink blobs. From Yuval Mintz. 6) Hash secret is never initialized in ipv6 ILA translation code, from Arnd Bergmann. I guess those clang warnings about unused inline functions are useful for something! 7) Fix endian selection in bpf_endian.h, from Daniel Borkmann. 8) Sanitize sockaddr length before dereferncing any fields in AF_UNIX and CAIF. From Mateusz Jurczyk. 9) Fix timestamping for GMAC3 chips in stmmac driver, from Mario Molitor. 10) Do not leak netdev on dev_alloc_name() errors in mac80211, from Johannes Berg. 11) Fix locking in sctp_for_each_endpoint(), from Xin Long. 12) Fix wrong memset size on 32-bit in snmp6, from Christian Perle. 13) Fix use after free in ip_mc_clear_src(), from WANG Cong. 14) Fix regressions caused by ICMP rate limiting changes in 4.11, from Jesper Dangaard Brouer. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (91 commits) i40e: Fix a sleep-in-atomic bug net: don't global ICMP rate limit packets originating from loopback net/act_pedit: fix an error code net: update undefined ->ndo_change_mtu() comment net_sched: move tcf_lock down after gen_replace_estimator() caif: Add sockaddr length check before accessing sa_family in connect handler qed: fix dump of context data qmi_wwan: new Telewell and Sierra device IDs net: phy: Fix MDIO_THUNDER dependencies netconsole: Remove duplicate "netconsole: " logging prefix igmp: acquire pmc lock for ip_mc_clear_src() r8152: give the device version net: rps: fix uninitialized symbol warning mac80211: don't send SMPS action frame in AP mode when not needed mac80211/wpa: use constant time memory comparison for MACs mac80211: set bss_info data before configuring the channel mac80211: remove 5/10 MHz rate code from station MLME mac80211: Fix incorrect condition when checking rx timestamp mac80211: don't look at the PM bit of BAR frames i40e: fix handling of HW ATR eviction ...
2017-06-14kselftest: convert get_size to use stricter TAP13 formatTim Bird1-11/+16
1. Add the TAP13 header 2. remove variable data from the test description line 3. move the plan count to the end of the file, for consistency with other kselftests 4. convert memory data from diagnostic (comment) format, to a YAML block Signed-off-by: Tim Bird <[email protected]> Signed-off-by: Shuah Khan <[email protected]>
2017-06-14tools: bpf_jit_disasm: Handle large images.David Daney1-11/+26
Dynamically allocate memory so that JIT images larger than the size of the statically allocated array can be handled. Signed-off-by: David Daney <[email protected]> Acked-by: Daniel Borkmann <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2017-06-14selftests/bpf: Add test cases to test narrower ctx field loadsYonghong Song4-1/+234
Add test cases in test_verifier and test_progs. Negative tests are added in test_verifier as well. The test in test_progs will compare the value of narrower ctx field load result vs. the masked value of normal full-field load result, and will fail if they are not the same. Acked-by: Daniel Borkmann <[email protected]> Signed-off-by: Yonghong Song <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2017-06-14bpf: permits narrower load from bpf program context fieldsYonghong Song1-79/+13
Currently, verifier will reject a program if it contains an narrower load from the bpf context structure. For example, __u8 h = __sk_buff->hash, or __u16 p = __sk_buff->protocol __u32 sample_period = bpf_perf_event_data->sample_period which are narrower loads of 4-byte or 8-byte field. This patch solves the issue by: . Introduce a new parameter ctx_field_size to carry the field size of narrower load from prog type specific *__is_valid_access validator back to verifier. . The non-zero ctx_field_size for a memory access indicates (1). underlying prog type specific convert_ctx_accesses supporting non-whole-field access (2). the current insn is a narrower or whole field access. . In verifier, for such loads where load memory size is less than ctx_field_size, verifier transforms it to a full field load followed by proper masking. . Currently, __sk_buff and bpf_perf_event_data->sample_period are supporting narrowing loads. . Narrower stores are still not allowed as typical ctx stores are just normal stores. Because of this change, some tests in verifier will fail and these tests are removed. As a bonus, rename some out of bound __sk_buff->cb access to proper field name and remove two redundant "skb cb oob" tests. Acked-by: Daniel Borkmann <[email protected]> Signed-off-by: Yonghong Song <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2017-06-14perf tools: Fix build with ARCH=x86_64Jiada Wang6-25/+25
With commit: 0a943cb10ce78 (tools build: Add HOSTARCH Makefile variable) when building for ARCH=x86_64, ARCH=x86_64 is passed to perf instead of ARCH=x86, so the perf build process searchs header files from tools/arch/x86_64/include, which doesn't exist. The following build failure is seen: In file included from util/event.c:2:0: tools/include/uapi/linux/mman.h:4:27: fatal error: uapi/asm/mman.h: No such file or directory compilation terminated. Fix this issue by using SRCARCH instead of ARCH in perf, just like the main kernel Makefile and tools/objtool's. Signed-off-by: Jiada Wang <[email protected]> Tested-by: Arnaldo Carvalho de Melo <[email protected]> Acked-by: Jiri Olsa <[email protected]> Cc: Alexander Shishkin <[email protected]> Cc: Andi Kleen <[email protected]> Cc: Eugeniu Rosca <[email protected]> Cc: Jan Stancek <[email protected]> Cc: Masami Hiramatsu <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: Ravi Bangoria <[email protected]> Cc: Rui Teng <[email protected]> Cc: Sukadev Bhattiprolu <[email protected]> Cc: Wang Nan <[email protected]> Fixes: 0a943cb10ce7 ("tools build: Add HOSTARCH Makefile variable") Link: http://lkml.kernel.org/r/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2017-06-14perf evsel: Fix probing of precise_ip level for default cycles eventArnaldo Carvalho de Melo2-1/+13
Since commit 18e7a45af91a ("perf/x86: Reject non sampling events with precise_ip") returns -EINVAL for sys_perf_event_open() with an attribute with (attr.precise_ip > 0 && attr.sample_period == 0), just like is done in the routine used to probe the max precise level when no events were passed to 'perf record' or 'perf top', i.e.: perf_evsel__new_cycles() perf_event_attr__set_max_precise_ip() The x86 code, in x86_pmu_hw_config(), which is called all the way from sys_perf_event_open() did, starting with the aforementioned commit: /* There's no sense in having PEBS for non sampling events: */ if (!is_sampling_event(event)) return -EINVAL; Which makes it fail for cycles:ppp, cycles:pp and cycles:p, always using just the non precise cycles variant. To make sure that this is the case, I tested it, before this patch, with: # perf probe -L x86_pmu_hw_config <x86_pmu_hw_config@/home/acme/git/linux/arch/x86/events/core.c:0> 0 int x86_pmu_hw_config(struct perf_event *event) 1 { 2 if (event->attr.precise_ip) { <SNIP> 17 if (event->attr.precise_ip > precise) 18 return -EOPNOTSUPP; /* There's no sense in having PEBS for non sampling events: */ 21 if (!is_sampling_event(event)) 22 return -EINVAL; } <SNIP> # perf probe x86_pmu_hw_config:22 Added new events: probe:x86_pmu_hw_config (on x86_pmu_hw_config:22) probe:x86_pmu_hw_config_1 (on x86_pmu_hw_config:22) You can now use it in all perf tools, such as: perf record -e probe:x86_pmu_hw_config_1 -aR sleep 1 # perf trace -e perf_event_open,probe:x86_pmu_hwconfig*/max-stack=16/ perf record usleep 1 0.000 ( 0.015 ms): perf/4150 perf_event_open(attr_uptr: 0x7ffebc8ba110, cpu: -1, group_fd: -1 ) ... 0.015 ( ): probe:x86_pmu_hw_config:(ffffffff9c0065e1)) x86_pmu_hw_config ([kernel.kallsyms]) hsw_hw_config ([kernel.kallsyms]) x86_pmu_event_init ([kernel.kallsyms]) perf_try_init_event ([kernel.kallsyms]) perf_event_alloc ([kernel.kallsyms]) SYSC_perf_event_open ([kernel.kallsyms]) sys_perf_event_open ([kernel.kallsyms]) do_syscall_64 ([kernel.kallsyms]) return_from_SYSCALL_64 ([kernel.kallsyms]) syscall (/usr/lib64/libc-2.24.so) perf_event_attr__set_max_precise_ip (/home/acme/bin/perf) perf_evsel__new_cycles (/home/acme/bin/perf) perf_evlist__add_default (/home/acme/bin/perf) cmd_record (/home/acme/bin/perf) run_builtin (/home/acme/bin/perf) handle_internal_command (/home/acme/bin/perf) 0.000 ( 0.021 ms): perf/4150 ... [continued]: perf_event_open()) = -1 EINVAL Invalid argument 0.023 ( 0.002 ms): perf/4150 perf_event_open(attr_uptr: 0x7ffebc8ba110, cpu: -1, group_fd: -1 ) ... 0.025 ( ): probe:x86_pmu_hw_config:(ffffffff9c0065e1)) x86_pmu_hw_config ([kernel.kallsyms]) hsw_hw_config ([kernel.kallsyms]) x86_pmu_event_init ([kernel.kallsyms]) perf_try_init_event ([kernel.kallsyms]) perf_event_alloc ([kernel.kallsyms]) SYSC_perf_event_open ([kernel.kallsyms]) sys_perf_event_open ([kernel.kallsyms]) do_syscall_64 ([kernel.kallsyms]) return_from_SYSCALL_64 ([kernel.kallsyms]) syscall (/usr/lib64/libc-2.24.so) perf_event_attr__set_max_precise_ip (/home/acme/bin/perf) perf_evsel__new_cycles (/home/acme/bin/perf) perf_evlist__add_default (/home/acme/bin/perf) cmd_record (/home/acme/bin/perf) run_builtin (/home/acme/bin/perf) handle_internal_command (/home/acme/bin/perf) 0.023 ( 0.004 ms): perf/4150 ... [continued]: perf_event_open()) = -1 EINVAL Invalid argument 0.028 ( 0.002 ms): perf/4150 perf_event_open(attr_uptr: 0x7ffebc8ba110, cpu: -1, group_fd: -1 ) ... 0.030 ( ): probe:x86_pmu_hw_config:(ffffffff9c0065e1)) x86_pmu_hw_config ([kernel.kallsyms]) hsw_hw_config ([kernel.kallsyms]) x86_pmu_event_init ([kernel.kallsyms]) perf_try_init_event ([kernel.kallsyms]) perf_event_alloc ([kernel.kallsyms]) SYSC_perf_event_open ([kernel.kallsyms]) sys_perf_event_open ([kernel.kallsyms]) do_syscall_64 ([kernel.kallsyms]) return_from_SYSCALL_64 ([kernel.kallsyms]) syscall (/usr/lib64/libc-2.24.so) perf_event_attr__set_max_precise_ip (/home/acme/bin/perf) perf_evsel__new_cycles (/home/acme/bin/perf) perf_evlist__add_default (/home/acme/bin/perf) cmd_record (/home/acme/bin/perf) run_builtin (/home/acme/bin/perf) handle_internal_command (/home/acme/bin/perf) 0.028 ( 0.004 ms): perf/4150 ... [continued]: perf_event_open()) = -1 EINVAL Invalid argument 41.018 ( 0.012 ms): perf/4150 perf_event_open(attr_uptr: 0x7ffebc8b5dd0, pid: -1, group_fd: -1, flags: FD_CLOEXEC) = 4 41.065 ( 0.011 ms): perf/4150 perf_event_open(attr_uptr: 0x3c7db78, pid: -1, group_fd: -1, flags: FD_CLOEXEC) = 4 41.080 ( 0.006 ms): perf/4150 perf_event_open(attr_uptr: 0x3c7db78, pid: -1, group_fd: -1, flags: FD_CLOEXEC) = 4 41.103 ( 0.010 ms): perf/4150 perf_event_open(attr_uptr: 0x3c4e748, pid: 4151 (perf), group_fd: -1, flags: FD_CLOEXEC) = 4 41.115 ( 0.006 ms): perf/4150 perf_event_open(attr_uptr: 0x3c4e748, pid: 4151 (perf), cpu: 1, group_fd: -1, flags: FD_CLOEXEC) = 5 41.122 ( 0.004 ms): perf/4150 perf_event_open(attr_uptr: 0x3c4e748, pid: 4151 (perf), cpu: 2, group_fd: -1, flags: FD_CLOEXEC) = 6 41.128 ( 0.008 ms): perf/4150 perf_event_open(attr_uptr: 0x3c4e748, pid: 4151 (perf), cpu: 3, group_fd: -1, flags: FD_CLOEXEC) = 8 [ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 0.017 MB perf.data (2 samples) ] # I.e. that return -EINVAL in x86_pmu_hw_config() is hit three times. So fix it by just setting attr.sample_period Now, after this patch: # perf trace --max-stack=2 -e perf_event_open,probe:x86_pmu_hw_config* perf record usleep 1 [ perf record: Woken up 1 times to write data ] 0.000 ( 0.017 ms): perf/8469 perf_event_open(attr_uptr: 0x7ffe36c27d10, pid: -1, cpu: 3, group_fd: -1, flags: FD_CLOEXEC) = 4 syscall (/usr/lib64/libc-2.24.so) perf_event_open_cloexec_flag (/home/acme/bin/perf) 0.050 ( 0.031 ms): perf/8469 perf_event_open(attr_uptr: 0x24ebb78, pid: -1, group_fd: -1, flags: FD_CLOEXEC) = 4 syscall (/usr/lib64/libc-2.24.so) perf_evlist__config (/home/acme/bin/perf) 0.092 ( 0.040 ms): perf/8469 perf_event_open(attr_uptr: 0x24ebb78, pid: -1, group_fd: -1, flags: FD_CLOEXEC) = 4 syscall (/usr/lib64/libc-2.24.so) perf_evlist__config (/home/acme/bin/perf) 0.143 ( 0.007 ms): perf/8469 perf_event_open(attr_uptr: 0x24bc748, cpu: -1, group_fd: -1 ) = 4 syscall (/usr/lib64/libc-2.24.so) perf_event_attr__set_max_precise_ip (/home/acme/bin/perf) 0.161 ( 0.007 ms): perf/8469 perf_event_open(attr_uptr: 0x24bc748, pid: 8470 (perf), group_fd: -1, flags: FD_CLOEXEC) = 4 syscall (/usr/lib64/libc-2.24.so) perf_evsel__open (/home/acme/bin/perf) 0.171 ( 0.005 ms): perf/8469 perf_event_open(attr_uptr: 0x24bc748, pid: 8470 (perf), cpu: 1, group_fd: -1, flags: FD_CLOEXEC) = 5 syscall (/usr/lib64/libc-2.24.so) perf_evsel__open (/home/acme/bin/perf) 0.180 ( 0.007 ms): perf/8469 perf_event_open(attr_uptr: 0x24bc748, pid: 8470 (perf), cpu: 2, group_fd: -1, flags: FD_CLOEXEC) = 6 syscall (/usr/lib64/libc-2.24.so) perf_evsel__open (/home/acme/bin/perf) 0.190 ( 0.005 ms): perf/8469 perf_event_open(attr_uptr: 0x24bc748, pid: 8470 (perf), cpu: 3, group_fd: -1, flags: FD_CLOEXEC) = 8 syscall (/usr/lib64/libc-2.24.so) perf_evsel__open (/home/acme/bin/perf) [ perf record: Captured and wrote 0.017 MB perf.data (7 samples) ] # The probe one called from perf_event_attr__set_max_precise_ip() works the first time, with attr.precise_ip = 3, wit hthe next ones being the per cpu ones for the cycles:ppp event. And here is the text from a report and alternative proposed patch by Thomas-Mich Richter: --- On s390 the counter and sampling facility do not support a precise IP skid level and sometimes returns EOPNOTSUPP when structure member precise_ip in struct perf_event_attr is not set to zero. On s390 commnd 'perf record -- true' fails with error EOPNOTSUPP. This happens only when no events are specified on command line. The functions called are ... --> perf_evlist__add_default --> perf_evsel__new_cycles --> perf_event_attr__set_max_precise_ip The last function determines the value of structure member precise_ip by invoking the perf_event_open() system call and checking the return code. The first successful open is the value for precise_ip. However the value is determined without setting member sample_period and indicates no sampling. On s390 the counter facility and sampling facility are different. The above procedure determines a precise_ip value of 3 using the counter facility. Later it uses the sampling facility with a value of 3 and fails with EOPNOTSUPP. --- v2: Older compilers (e.g. gcc 4.4.7) don't support referencing members of unnamed union members in the container struct initialization, so move from: struct perf_event_attr attr = { ... .sample_period = 1, }; to right after it as: struct perf_event_attr attr = { ... }; attr.sample_period = 1; v3: We need to reset .sample_period to 0 to let the users of perf_evsel__new_cycles() to properly setup attr.sample_period or attr.sample_freq. Reported by Ingo Molnar. Reported-and-Acked-by: Thomas-Mich Richter <[email protected]> Acked-by: Hendrik Brueckner <[email protected]> Acked-by: Jiri Olsa <[email protected]> Cc: Adrian Hunter <[email protected]> Cc: Alexander Shishkin <[email protected]> Cc: David Ahern <[email protected]> Cc: Namhyung Kim <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: Wang Nan <[email protected]> Fixes: 18e7a45af91a ("perf/x86: Reject non sampling events with precise_ip") Link: http://lkml.kernel.org/n/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2017-06-13kselftest: breakpoints: convert step_after_suspend_test to TAP13 outputPaul Elder1-26/+17
Make the step_after_suspend test output in the TAP13 format by using the TAP13 output functions defined in kselftest.h Signed-off-by: Paul Elder <[email protected]> Signed-off-by: Alice Ferrazzi <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]> Signed-off-by: Shuah Khan <[email protected]>
2017-06-13kselftest: breakpoints: convert breakpoint_test to TAP13 outputPaul Elder1-14/+15
Make the breakpoints test output in the TAP13 format by using the TAP13 output functions defined in kselftest.h Signed-off-by: Paul Elder <[email protected]> Signed-off-by: Alice Ferrazzi <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]> Signed-off-by: Shuah Khan <[email protected]>
2017-06-13kselftest: membarrier: convert to TAP13 outputPaul Elder1-16/+19
Make the membarrier test output in the TAP13 format by using the TAP13 output functions defined in kselftest.h Signed-off-by: Paul Elder <[email protected]> Signed-off-by: Alice Ferrazzi <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]> Signed-off-by: Shuah Khan <[email protected]>
2017-06-13kselftest: add TAP13 conformant versions of ksft_* functionsPaul Elder1-4/+48
Add TAP13 conformat output functions to kselftest.h. Also add exit functions that output TAP13 exiting text, as well as functions to keep track of testing progress. Signed-off-by: Paul Elder <[email protected]> Signed-off-by: Alice Ferrazzi <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]> Signed-off-by: Shuah Khan <[email protected]>
2017-06-13selftests/bpf: make correct use of exit codes in bpf selftestsJesper Dangaard Brouer3-3/+3
The selftests depend on using the shell exit code as a mean of detecting the success or failure of test-binary executed. The appropiate output "[PASS]" or "[FAIL]" in generated by tools/testing/selftests/lib.mk. Notice that the exit code is masked with 255. Thus, be careful if using the number of errors as the exit code, as 256 errors would be seen as a success. There are two standard defined exit(3) codes: /usr/include/stdlib.h #define EXIT_FAILURE 1 /* Failing exit status. */ #define EXIT_SUCCESS 0 /* Successful exit status. */ Fix test_verifier.c to not use the negative value of variable "results", but instead return EXIT_FAILURE. Fix test_align.c and test_progs.c to actually use exit codes, before they were always indicating success regardless of results. Signed-off-by: Jesper Dangaard Brouer <[email protected]> Acked-by: Daniel Borkmann <[email protected]> Reviewed-by: Fengguang Wu <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2017-06-13usbip: vhci-hcd: Add USB3 SuperSpeed supportYuyang Du3-9/+25
This patch adds a USB3 HCD to an existing USB2 HCD and provides the support of SuperSpeed, in case the device can only be enumerated with SuperSpeed. The bulk of the added code in usb3_bos_desc and hub_control to support SuperSpeed is borrowed from the commit 1cd8fd2887e162ad ("usb: gadget: dummy_hcd: add SuperSpeed support"). With this patch, each vhci will have VHCI_HC_PORTS HighSpeed ports and VHCI_HC_PORTS SuperSpeed ports. Suggested-by: Krzysztof Opasiak <[email protected]> Signed-off-by: Yuyang Du <[email protected]> Acked-by: Shuah Khan <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
2017-06-13usbip: vhci-hcd: Rework vhci_hcd_initYuyang Du2-1/+2
A vhci struct is added as the platform-specific data to the vhci platform device, in order to get the vhci by its platform device. This is done in vhci_hcd_init(). Signed-off-by: Yuyang Du <[email protected]> Acked-by: Shuah Khan <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
2017-06-13usb: usbip tool: Fix parse_status()Yuyang Du2-23/+17
In parse_status(), all nports number of idev's are initiated to 0 by memset(), it is simply wrong, because parse_status() reads the status sys file one by one, therefore, it can only update the according vhci_driver->idev's for it to parse. Reviewed-by: Krzysztof Opasiak <[email protected]> Signed-off-by: Yuyang Du <[email protected]> Acked-by: Shuah Khan <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
2017-06-13usb: usbip tool: Fix refresh_imported_device_list()Yuyang Du1-6/+21
The commit 0775a9cbc694e8c7 ("usbip: vhci extension: modifications to vhci driver") introduced multiple controllers, but the status of the ports are only extracted from the first status file, fix it. Reviewed-by: Krzysztof Opasiak <[email protected]> Signed-off-by: Yuyang Du <[email protected]> Acked-by: Shuah Khan <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
2017-06-13usb: usbip tool: Add ncontrollers in vhci_driver structureYuyang Du2-0/+37
A new field ncontrollers is added to the vhci_driver structure. And this field is stored by scanning the vhci_hcd* dirs in the platform udev. Suggested-and-reviewed-by: Krzysztof Opasiak <[email protected]> Signed-off-by: Yuyang Du <[email protected]> Acked-by: Shuah Khan <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
2017-06-13usb: usbip tool: Check the return of get_nports()Yuyang Du1-1/+8
If we get nonpositive number of ports, there is no sense to continue, then fail gracefully. In addition, the commit 0775a9cbc694e8c72 ("usbip: vhci extension: modifications to vhci driver") introduced configurable numbers of controllers and ports, but we have a static port number maximum, MAXNPORT. If exceeded, the idev array will be overflown. We fix it by validating the nports to make sure the port number max is not exceeded. Reviewed-by: Krzysztof Opasiak <[email protected]> Signed-off-by: Yuyang Du <[email protected]> Acked-by: Shuah Khan <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
2017-06-13Merge branch 'for-mingo' of ↵Ingo Molnar32-108/+65
git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu into core/rcu Pull RCU updates from Paul E. McKenney: "The largest feature of this series is shrinking and simplification, with the following diffstat summary: 79 files changed, 1496 insertions(+), 4211 deletions(-) In other words, this series represents a net reduction of more than 2700 lines of code." Signed-off-by: Ingo Molnar <[email protected]>
2017-06-12selftests: kselftest_harness: Fix compile warningMickaël Salaün1-1/+1
Do not confuse the compiler with a semicolon preceding a block. Replace the semicolon with an empty block to avoid a warning: gcc -Wl,-no-as-needed -Wall -lpthread seccomp_bpf.c -o /.../linux/tools/testing/selftests/seccomp/seccomp_bpf In file included from seccomp_bpf.c:40:0: seccomp_bpf.c: In function ‘change_syscall’: ../kselftest_harness.h:558:2: warning: this ‘for’ clause does not guard... [-Wmisleading-indentation] for (; _metadata->trigger; _metadata->trigger = __bail(_assert)) ^ ../kselftest_harness.h:574:14: note: in expansion of macro ‘OPTIONAL_HANDLER’ } while (0); OPTIONAL_HANDLER(_assert) ^~~~~~~~~~~~~~~~ ../kselftest_harness.h:440:2: note: in expansion of macro ‘__EXPECT’ __EXPECT(expected, seen, ==, 0) ^~~~~~~~ seccomp_bpf.c:1313:2: note: in expansion of macro ‘EXPECT_EQ’ EXPECT_EQ(0, ret); ^~~~~~~~~ seccomp_bpf.c:1317:2: note: ...this statement, but the latter is misleadingly indented as if it is guarded by the ‘for’ { ^ Signed-off-by: Mickaël Salaün <[email protected]> Cc: Andy Lutomirski <[email protected]> Cc: Kees Cook <[email protected]> Cc: Shuah Khan <[email protected]> Cc: Will Drewry <[email protected]> Acked-by: Kees Cook <[email protected]> Signed-off-by: Shuah Khan <[email protected]>
2017-06-12Merge 4.12-rc5 into staging-nextGreg Kroah-Hartman43-208/+685
We want the IIO fixes and other staging driver fixes in here as well. Signed-off-by: Greg Kroah-Hartman <[email protected]>
2017-06-12Merge 4.12-rc5 into char-misc-nextGreg Kroah-Hartman43-208/+685
We want the char/misc driver fixes in here as well. Signed-off-by: Greg Kroah-Hartman <[email protected]>
2017-06-10bpf: add bpf_set_hash helper for tc progsDaniel Borkmann1-1/+7
Allow for tc BPF programs to set a skb->hash, apart from clearing and triggering a recalc that we have right now. It allows for BPF to implement a custom hashing routine for skb_get_hash(). Signed-off-by: Daniel Borkmann <[email protected]> Acked-by: Alexei Starovoitov <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2017-06-10bpf, tests: set rlimit also for test_align, so it doesn't failDaniel Borkmann1-0/+5
When running all the tests, through 'make run_tests', I had test_align failing due to insufficient rlimit. Set it the same way as all other test cases from BPF selftests do, so that test case properly loads everything. [...] Summary: 7 PASSED, 1 FAILED selftests: test_progs [PASS] /home/foo/net-next/tools/testing/selftests/bpf Test 0: mov ... Failed to load program. FAIL Test 1: shift ... Failed to load program. FAIL Test 2: addsub ... Failed to load program. FAIL Test 3: mul ... Failed to load program. FAIL Test 4: unknown shift ... Failed to load program. FAIL Test 5: unknown mul ... Failed to load program. FAIL Test 6: packet const offset ... Failed to load program. FAIL Test 7: packet variable offset ... Failed to load program. FAIL Results: 0 pass 8 fail selftests: test_align [PASS] [...] Signed-off-by: Daniel Borkmann <[email protected]> Acked-by: Alexei Starovoitov <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2017-06-10bpf, tests: add a test for htab lookup + update traversalDaniel Borkmann1-0/+50
Add a test case to track behaviour when traversing and updating the htab map. We recently used such traversal, so it's quite useful to keep it as an example in selftests. Signed-off-by: Daniel Borkmann <[email protected]> Acked-by: Alexei Starovoitov <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2017-06-09bpf: Fix test_obj_id.c for llvm 5.0Martin KaFai Lau1-2/+2
llvm 5.0 does not like the section name and the function name to be the same: clang -I. -I./include/uapi -I../../../include/uapi \ -I../../../../samples/bpf/ \ -Wno-compare-distinct-pointer-types \ -O2 -target bpf -c \ linux/tools/testing/selftests/bpf/test_obj_id.c -o \ linux/tools/testing/selftests/bpf/test_obj_id.o fatal error: error in backend: 'test_prog_id' label emitted multiple times to assembly file clang-5.0: error: clang frontend command failed with exit code 70 (use -v to see invocation) clang version 5.0.0 (trunk 304326) (llvm/trunk 304329) This patch makes changes to the section name and the function name. Fixes: 95b9afd3987f ("bpf: Test for bpf ID") Reported-by: Alexei Starovoitov <[email protected]> Reported-by: Yonghong Song <[email protected]> Signed-off-by: Martin KaFai Lau <[email protected]> Acked-by: Daniel Borkmann <[email protected]> Acked-by: Yonghong Song <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2017-06-09bpf: Fix test_bpf_obj_id() when the bpf_jit_enable sysctl is diabledMartin KaFai Lau1-4/+15
test_bpf_obj_id() should not expect a non zero jited_prog_len to be returned by bpf_obj_get_info_by_fd() when net.core.bpf_jit_enable is 0. The patch checks for net.core.bpf_jit_enable and has different expectation on jited_prog_len. This patch also removes the pwd.h header which I forgot to remove after making changes. Fixes: 95b9afd3987f ("bpf: Test for bpf ID") Reported-by: Yonghong Song <[email protected]> Signed-off-by: Martin KaFai Lau <[email protected]> Acked-by: Daniel Borkmann <[email protected]> Acked-by: Yonghong Song <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2017-06-08rcu: Remove RCU CPU stall warnings from Tiny RCUPaul E. McKenney1-1/+0
Tiny RCU's job is to be tiny, so this commit removes its RCU CPU stall warning code. After this, there is no longer any need for rcu_sched_ctrlblk and rcu_bh_ctrlblk to be in tiny_plugin.h, so this commit also moves them to tiny.c. Signed-off-by: Paul E. McKenney <[email protected]>
2017-06-08rcu: Eliminate NOCBs CPU-state Kconfig optionsPaul E. McKenney6-8/+5
The CONFIG_RCU_NOCB_CPU_ALL, CONFIG_RCU_NOCB_CPU_NONE, and CONFIG_RCU_NOCB_CPU_ZERO Kconfig options are used only in testing and are redundant with the rcu_nocbs= boot parameter. This commit therefore removes these three Kconfig options and adjusts the rcutorture scripts to use the boot parameter instead. Signed-off-by: Paul E. McKenney <[email protected]>
2017-06-08rcu: Remove debugfs tracingPaul E. McKenney3-46/+0
RCU's debugfs tracing used to be the only reasonable low-level debug information available, but ftrace and event tracing has since surpassed the RCU debugfs level of usefulness. This commit therefore removes RCU's debugfs tracing. Signed-off-by: Paul E. McKenney <[email protected]>
2017-06-08srcu: Remove Classic SRCUPaul E. McKenney3-28/+0
Classic SRCU was only ever intended to be a fallback in case of issues with Tree/Tiny SRCU, and the latter two are doing quite well in testing. This commit therefore removes Classic SRCU. Signed-off-by: Paul E. McKenney <[email protected]>
2017-06-08rcu: Remove SPARSE_RCU_POINTER Kconfig optionPaul E. McKenney1-4/+0
The sparse-based checking for non-RCU accesses to RCU-protected pointers has been around for a very long time, and it is now the only type of sparse-based checking that is optional. This commit therefore makes it unconditional. Reported-by: Ingo Molnar <[email protected]> Signed-off-by: Paul E. McKenney <[email protected]> Cc: Fengguang Wu <[email protected]>
2017-06-08rcu: Remove the now-obsolete PROVE_RCU_REPEATEDLY Kconfig optionPaul E. McKenney2-2/+0
The PROVE_RCU_REPEATEDLY Kconfig option was initially added due to the volume of messages from PROVE_RCU: Doing just one per boot would have required excessive numbers of boots to locate them all. However, PROVE_RCU messages are now relatively rare, so there is no longer any reason to need more than one such message per boot. This commit therefore removes the PROVE_RCU_REPEATEDLY Kconfig option. Signed-off-by: Paul E. McKenney <[email protected]> Cc: Ingo Molnar <[email protected]>
2017-06-08rcu: Remove nohz_full full-system-idle state machinePaul E. McKenney3-8/+1
The NO_HZ_FULL_SYSIDLE full-system-idle capability was added in 2013 by commit 0edd1b1784cb ("nohz_full: Add full-system-idle state machine"), but has not been used. This commit therefore removes it. If it turns out to be needed later, this commit can always be reverted. Signed-off-by: Paul E. McKenney <[email protected]> Cc: Frederic Weisbecker <[email protected]> Cc: Rik van Riel <[email protected]> Cc: Ingo Molnar <[email protected]> Acked-by: Linus Torvalds <[email protected]>
2017-06-08rcu: Remove the RCU_KTHREAD_PRIO Kconfig optionPaul E. McKenney3-2/+1
Anything that can be done with the RCU_KTHREAD_PRIO Kconfig option can also be done with the rcutree.kthread_prio kernel boot parameter. This commit therefore removes this Kconfig option. Reported-by: Linus Torvalds <[email protected]> Signed-off-by: Paul E. McKenney <[email protected]> Cc: Frederic Weisbecker <[email protected]> Cc: Rik van Riel <[email protected]>
2017-06-08rcu: Remove *_SLOW_* Kconfig optionsPaul E. McKenney12-30/+12
The RCU_TORTURE_TEST_SLOW_PREINIT, RCU_TORTURE_TEST_SLOW_PREINIT_DELAY, RCU_TORTURE_TEST_SLOW_PREINIT_DELAY, RCU_TORTURE_TEST_SLOW_INIT, RCU_TORTURE_TEST_SLOW_INIT_DELAY, RCU_TORTURE_TEST_SLOW_CLEANUP, and RCU_TORTURE_TEST_SLOW_CLEANUP_DELAY Kconfig options are only useful for torture testing, and there are the rcutree.gp_cleanup_delay, rcutree.gp_init_delay, and rcutree.gp_preinit_delay kernel boot parameters that rcutorture can use instead. The effect of these parameters is to artificially slow down grace period initialization and cleanup in order to make some types of race conditions happen more often. This commit therefore simplifies Tree RCU a bit by removing the Kconfig options and adding the corresponding kernel parameters to rcutorture's .boot files instead. However, this commit also leaves out the kernel parameters for TREE02, TREE04, and TREE07 in order to have about the same number of tests slowed as not slowed. TREE01, TREE03, TREE05, and TREE06 are slowed, and the rest are not slowed. Reported-by: Linus Torvalds <[email protected]> Signed-off-by: Paul E. McKenney <[email protected]>
2017-06-08bpf, tests: fix endianness selectionDaniel Borkmann1-11/+30
I noticed that test_l4lb was failing in selftests: # ./test_progs test_pkt_access:PASS:ipv4 77 nsec test_pkt_access:PASS:ipv6 44 nsec test_xdp:PASS:ipv4 2933 nsec test_xdp:PASS:ipv6 1500 nsec test_l4lb:PASS:ipv4 377 nsec test_l4lb:PASS:ipv6 544 nsec test_l4lb:FAIL:stats 6297600000 200000 test_tcp_estats:PASS: 0 nsec Summary: 7 PASSED, 1 FAILED Tracking down the issue actually revealed that endianness selection in bpf_endian.h is broken when compiled with clang with bpf target. test_pkt_access.c, test_l4lb.c is compiled with __BYTE_ORDER as __BIG_ENDIAN, test_xdp.c as __LITTLE_ENDIAN! test_l4lb noticeably fails, because the test accounts bytes via bpf_ntohs(ip6h->payload_len) and bpf_ntohs(iph->tot_len), and compares them against a defined value and given a wrong endianness, the test outcome is different, of course. Turns out that there are actually two bugs: i) when we do __BYTE_ORDER comparison with __LITTLE_ENDIAN/__BIG_ENDIAN, then depending on the include order we see different outcomes. Reason is that __BYTE_ORDER is undefined due to missing endian.h include. Before we include the asm/byteorder.h (e.g. through linux/in.h), then __BYTE_ORDER equals __LITTLE_ENDIAN since both are undefined, after the include which correctly pulls in linux/byteorder/little_endian.h, __LITTLE_ENDIAN is defined, but given __BYTE_ORDER is still undefined, we match on __BYTE_ORDER equals to __BIG_ENDIAN since __BIG_ENDIAN is also undefined at that point, sigh. ii) But even that would be wrong, since when compiling the test cases with clang, one can select between bpfeb and bpfel targets for cross compilation. Hence, we can also not rely on what the system's endian.h provides, but we need to look at the compiler's defined endianness. The compiler defines __BYTE_ORDER__, and we can match __ORDER_LITTLE_ENDIAN__ and __ORDER_BIG_ENDIAN__, which also reflects targets bpf (native), bpfel, bpfeb correctly, thus really only rely on that. After patch: # ./test_progs test_pkt_access:PASS:ipv4 74 nsec test_pkt_access:PASS:ipv6 42 nsec test_xdp:PASS:ipv4 2340 nsec test_xdp:PASS:ipv6 1461 nsec test_l4lb:PASS:ipv4 400 nsec test_l4lb:PASS:ipv6 530 nsec test_tcp_estats:PASS: 0 nsec Summary: 7 PASSED, 0 FAILED Fixes: 43bcf707ccdc ("bpf: fix _htons occurences in test_progs") Signed-off-by: Daniel Borkmann <[email protected]> Acked-by: Alexei Starovoitov <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2017-06-08perf symbols: Kill dso__build_id_is_kmod()Namhyung Kim3-50/+0
The commit e7ee40475760 ("perf symbols: Fix symbols searching for module in buildid-cache") added the function to check kernel modules reside in the build-id cache. This was because there's no way to identify a DSO which is actually a kernel module. So it searched linkname of the file and find ".ko" suffix. But this does not work for compressed kernel modules and now such DSOs hCcave correct symtab_type now. So no need to check it anymore. This patch essentially reverts the commit. Signed-off-by: Namhyung Kim <[email protected]> Acked-by: Jiri Olsa <[email protected]> Cc: Adrian Hunter <[email protected]> Cc: David Ahern <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: Wang Nan <[email protected]> Cc: [email protected] Link: http://lkml.kernel.org/r/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2017-06-08perf symbols: Keep DSO->symtab_type after decompressNamhyung Kim1-0/+2
The symsrc__init() overwrites dso->symtab_type as symsrc->type in dso__load_sym(). But for compressed kernel modules in the build-id cache, it should have original symtab type to be decompressed as needed. This fixes perf annotate to show disassembly of the function properly. Signed-off-by: Namhyung Kim <[email protected]> Acked-by: Jiri Olsa <[email protected]> Cc: Adrian Hunter <[email protected]> Cc: David Ahern <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: Wang Nan <[email protected]> Cc: [email protected] Link: http://lkml.kernel.org/r/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2017-06-08perf tests: Decompress kernel module before objdumpNamhyung Kim1-1/+19
If a kernel modules is compressed, it should be decompressed before running objdump to parse binary data correctly. This fixes a failure of object code reading test for me. Signed-off-by: Namhyung Kim <[email protected]> Acked-by: Adrian Hunter <[email protected]> Acked-by: Jiri Olsa <[email protected]> Cc: David Ahern <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: Wang Nan <[email protected]> Cc: [email protected] Link: http://lkml.kernel.org/r/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2017-06-08perf tools: Consolidate error path in __open_dso()Namhyung Kim1-11/+8
On failure, it should free the 'name', so clean up the error path using goto. Signed-off-by: Namhyung Kim <[email protected]> Suggested-by: Arnaldo Carvalho de Melo <[email protected]> Acked-by: Jiri Olsa <[email protected]> Cc: Adrian Hunter <[email protected]> Cc: David Ahern <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: Wang Nan <[email protected]> Cc: [email protected] Link: http://lkml.kernel.org/r/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2017-06-08perf tools: Decompress kernel module when reading DSO dataNamhyung Kim1-0/+16
Currently perf decompresses kernel modules when loading the symbol table but it missed to do it when reading raw data. Signed-off-by: Namhyung Kim <[email protected]> Acked-by: Jiri Olsa <[email protected]> Cc: Adrian Hunter <[email protected]> Cc: David Ahern <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: Wang Nan <[email protected]> Cc: [email protected] Link: http://lkml.kernel.org/r/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2017-06-08perf annotate: Use dso__decompress_kmodule_path()Namhyung Kim1-24/+3
Convert open-coded decompress routine to use the function. Signed-off-by: Namhyung Kim <[email protected]> Acked-by: Jiri Olsa <[email protected]> Cc: Adrian Hunter <[email protected]> Cc: David Ahern <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: Wang Nan <[email protected]> Cc: [email protected] Link: http://lkml.kernel.org/r/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2017-06-08perf tools: Introduce dso__decompress_kmodule_{fd,path}Namhyung Kim3-35/+65
Move decompress_kmodule() to util/dso.c and split it into two functions returning fd and (decompressed) file path. The existing user only wants the fd version but the path version will be used soon. Signed-off-by: Namhyung Kim <[email protected]> Acked-by: Jiri Olsa <[email protected]> Cc: Adrian Hunter <[email protected]> Cc: David Ahern <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: Wang Nan <[email protected]> Cc: [email protected] Link: http://lkml.kernel.org/r/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
Powered by cgit, Gruvboxed by Blaster4385.