| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Store flags per struct pollfd *entries object in a bitmap of int size.
Implement fdarray_flag__nonfilterable flag to skip object from counting
by fdarray__filter().
Fixed fdarray test issue reported by kernel test robot.
Reported-by: kernel test robot <[email protected]>
Signed-off-by: Alexey Budankov <[email protected]>
Acked-by: Jiri Olsa <[email protected]>
Acked-by: Namhyung Kim <[email protected]>
Cc: Alexander Shishkin <[email protected]>
Cc: Andi Kleen <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Link: http://lore.kernel.org/lkml/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
Change the counter name DLFT_CCERROR to DLFT_CCFINISH on IBM z15.
This counter counts completed DEFLATE instructions with exit code
0, 1 or 2. Since exit code 0 means success and exit code 1 or 2
indicate errors, change the counter name to avoid confusion.
This counter is incremented each time the DEFLATE instruction
completed regardless if an error was detected or not.
Fixes: d68d5d51dc89 ("s390/cpum_cf: Add new extended counters for IBM z15")
Fixes: e7950166e402 ("perf vendor events s390: Add new deflate counters for IBM z15")
Cc: [email protected] # v5.7
Signed-off-by: Thomas Richter <[email protected]>
Reviewed-by: Sumanth Korikkar <[email protected]>
Signed-off-by: Heiko Carstens <[email protected]>
|
|
Avoid moving of fds by fdarray__filter() so fds indices returned by
fdarray__add() can be used for access and processing of objects at
struct pollfd *entries.
Signed-off-by: Alexey Budankov <[email protected]>
Acked-by: Jiri Olsa <[email protected]>
Acked-by: Namhyung Kim <[email protected]>
Cc: Alexander Shishkin <[email protected]>
Cc: Andi Kleen <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Link: http://lore.kernel.org/lkml/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
smp_read_barrier_depends() has gone the way of mmiowb() and so many
esoteric memory barriers before it. Drop the two mentions of this
deceased barrier from the LKMM informal explanation document.
Acked-by: Peter Zijlstra (Intel) <[email protected]>
Acked-by: Alan Stern <[email protected]>
Acked-by: Paul E. McKenney <[email protected]>
Signed-off-by: Will Deacon <[email protected]>
|
|
Pulling header files directly out of the kernel sources for inclusion in
userspace programs is highly error prone, not least because it bypasses
the kbuild infrastructure entirely and so may end up referencing other
header files that have not been generated.
Subsequent patches will cause compiler.h to pull in the ungenerated
asm/rwonce.h file via filter.h, breaking the build for tools/bpf:
| $ make -C tools/bpf
| make: Entering directory '/linux/tools/bpf'
| CC bpf_jit_disasm.o
| LINK bpf_jit_disasm
| CC bpf_dbg.o
| In file included from /linux/include/uapi/linux/filter.h:9,
| from /linux/tools/bpf/bpf_dbg.c:41:
| /linux/include/linux/compiler.h:247:10: fatal error: asm/rwonce.h: No such file or directory
| #include <asm/rwonce.h>
| ^~~~~~~~~~~~~~
| compilation terminated.
| make: *** [Makefile:61: bpf_dbg.o] Error 1
| make: Leaving directory '/linux/tools/bpf'
Take a copy of the installed version of linux/filter.h (i.e. the one
created by the 'headers_install' target) into tools/include/uapi/linux/
and adjust the BPF tool Makefile to reference the local include
directories instead of those in the main source tree.
Cc: Masahiro Yamada <[email protected]>
Acked-by: Peter Zijlstra (Intel) <[email protected]>
Acked-by: Alexei Starovoitov <[email protected]>
Suggested-by: Daniel Borkmann <[email protected]>
Reported-by: Xiao Yang <[email protected]>
Signed-off-by: Will Deacon <[email protected]>
|
|
Add tdc to existing kselftest infrastructure so that it can be run with
existing kselftests. TDC now generates objects in objdir/kselftest
without cluttering main objdir, leaves source directory clean, and
installs correctly in kselftest_install, properly adding itself to
run_kselftest.sh script.
Add tc-testing as a target of selftests/Makefile. Create tdc.sh to run
tdc.py targets with correct arguments. To support single target from
selftest/Makefile, combine tc-testing/bpf/Makefile and
tc-testing/Makefile. Move action.c up a directory to tc-testing/.
Tested with:
make O=/tmp/{objdir} TARGETS="tc-testing" kselftest
cd /tmp/{objdir}
cd kselftest
cd tc-testing
./tdc.sh
make -C tools/testing/selftests/ TARGETS=tc-testing run_tests
make TARGETS="tc-testing" kselftest
cd tools/testing/selftests
./kselftest_install.sh /tmp/exampledir
My VM doesn't run all the kselftests so I commented out all except my
target and net/pmtu.sh then:
cd /tmp/exampledir && ./run_kselftest.sh
Co-developed-by: Davide Caratti <[email protected]>
Signed-off-by: Davide Caratti <[email protected]>
Signed-off-by: Briana Oursler <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
Extend the example program for PTP ancillary functionality with the
ability to configure not only the periodic output's period (frequency),
but also the phase and duty cycle (pulse width) which were newly
introduced.
The ioctl level also needs to be updated to the new PTP_PEROUT_REQUEST2,
since the original PTP_PEROUT_REQUEST doesn't support this
functionality. For an in-tree testing program, not having explicit
backwards compatibility is fine, as it should always be tested with the
current kernel headers and sources.
Tested with an oscilloscope on the felix switch PHC:
echo '2 0' > /sys/class/ptp/ptp1/pins/switch_1588_dat0
./testptp -d /dev/ptp1 -p 1000000000 -w 100000000 -H 1000 -i 0
Signed-off-by: Vladimir Oltean <[email protected]>
Acked-by: Richard Cochran <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
Since 'perout' holds the nanosecond value of the signal's period, it
should be a 64-bit value. Current assumption is that it cannot be larger
than 1 second.
Signed-off-by: Vladimir Oltean <[email protected]>
Acked-by: Richard Cochran <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
This adds a test that changes its UID, uses capabilities to
get CAP_CHECKPOINT_RESTORE and uses clone3() with set_tid to
create a process with a given PID as non-root.
Signed-off-by: Adrian Reber <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
[[email protected]: use TH_LOG() instead of ksft_print_msg()]
Signed-off-by: Christian Brauner <[email protected]>
|
|
To get the changes in the commit:
"perf: Add perf_event_mmap_page::cap_user_time_short ABI"
This update is a prerequisite to add support for short clock counters
related ABI extension.
Signed-off-by: Leo Yan <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Will Deacon <[email protected]>
|
|
We need the char/misc fixes in here as well.
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
We need the USB fixes in here as well.
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
Now that the ->compat_{get,set}sockopt proto_ops methods are gone
there is no good reason left to keep the compat syscalls separate.
This fixes the odd use of unsigned int for the compat_setsockopt
optlen and the missing sock_use_custom_sol_socket.
It would also easily allow running the eBPF hooks for the compat
syscalls, but such a large change in behavior does not belong into
a consolidation patch like this one.
Signed-off-by: Christoph Hellwig <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux into master
Pull perf tooling fixes from Arnaldo Carvalho de Melo:
- Update hashmap.h from libbpf and kvm.h from x86's kernel UAPI.
- Set opt->set in libsubcmd's OPT_CALLBACK_SET(). This fixes
'perf record --switch-output-event event-name' usage"
* tag 'perf-tools-fixes-2020-07-19' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux:
tools arch kvm: Sync kvm headers with the kernel sources
perf tools: Sync hashmap.h with libbpf's
libsubcmd: Fix OPT_CALLBACK_SET()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux into master
Pull powerpc fixes from Michael Ellerman:
"Some more powerpc fixes for 5.8:
- A fix to the VAS code we merged this cycle, to report the proper
error code to userspace for address translation failures. And a
selftest update to match.
- Another fix for our pkey handling of PROT_EXEC mappings.
- A fix for a crash when booting a "secure VM" under an ultravisor
with certain numbers of CPUs.
Thanks to: Aneesh Kumar K.V, Haren Myneni, Laurent Dufour, Sandipan
Das, Satheesh Rajendran, Thiago Jung Bauermann"
* tag 'powerpc-5.8-7' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
selftests/powerpc: Use proper error code to check fault address
powerpc/vas: Report proper error code for address translation failure
powerpc/pseries/svm: Fix incorrect check for shared_lppaca_size
powerpc/book3s64/pkeys: Fix pkey_access_permitted() for execute disable pkey
|
|
Merge our fixes branch, primarily to bring in the ebb selftests build
fix and the pkey fix, which is a dependency for some future work.
|
|
Add tests to test_progs that exercise:
- attaching/detaching/querying programs to BPF_SK_LOOKUP hook,
- redirecting socket lookup to a socket selected by BPF program,
- failing a socket lookup on BPF program's request,
- error scenarios for selecting a socket from BPF program,
- accessing BPF program context,
- attaching and running multiple BPF programs.
Run log:
bash-5.0# ./test_progs -n 70
#70/1 query lookup prog:OK
#70/2 TCP IPv4 redir port:OK
#70/3 TCP IPv4 redir addr:OK
#70/4 TCP IPv4 redir with reuseport:OK
#70/5 TCP IPv4 redir skip reuseport:OK
#70/6 TCP IPv6 redir port:OK
#70/7 TCP IPv6 redir addr:OK
#70/8 TCP IPv4->IPv6 redir port:OK
#70/9 TCP IPv6 redir with reuseport:OK
#70/10 TCP IPv6 redir skip reuseport:OK
#70/11 UDP IPv4 redir port:OK
#70/12 UDP IPv4 redir addr:OK
#70/13 UDP IPv4 redir with reuseport:OK
#70/14 UDP IPv4 redir skip reuseport:OK
#70/15 UDP IPv6 redir port:OK
#70/16 UDP IPv6 redir addr:OK
#70/17 UDP IPv4->IPv6 redir port:OK
#70/18 UDP IPv6 redir and reuseport:OK
#70/19 UDP IPv6 redir skip reuseport:OK
#70/20 TCP IPv4 drop on lookup:OK
#70/21 TCP IPv6 drop on lookup:OK
#70/22 UDP IPv4 drop on lookup:OK
#70/23 UDP IPv6 drop on lookup:OK
#70/24 TCP IPv4 drop on reuseport:OK
#70/25 TCP IPv6 drop on reuseport:OK
#70/26 UDP IPv4 drop on reuseport:OK
#70/27 TCP IPv6 drop on reuseport:OK
#70/28 sk_assign returns EEXIST:OK
#70/29 sk_assign honors F_REPLACE:OK
#70/30 sk_assign accepts NULL socket:OK
#70/31 access ctx->sk:OK
#70/32 narrow access to ctx v4:OK
#70/33 narrow access to ctx v6:OK
#70/34 sk_assign rejects TCP established:OK
#70/35 sk_assign rejects UDP connected:OK
#70/36 multi prog - pass, pass:OK
#70/37 multi prog - drop, drop:OK
#70/38 multi prog - pass, drop:OK
#70/39 multi prog - drop, pass:OK
#70/40 multi prog - pass, redir:OK
#70/41 multi prog - redir, pass:OK
#70/42 multi prog - drop, redir:OK
#70/43 multi prog - redir, drop:OK
#70/44 multi prog - redir, redir:OK
#70 sk_lookup:OK
Summary: 1/44 PASSED, 0 SKIPPED, 0 FAILED
Signed-off-by: Jakub Sitnicki <[email protected]>
Signed-off-by: Alexei Starovoitov <[email protected]>
Link: https://lore.kernel.org/bpf/[email protected]
|
|
Exercise verifier access checks for bpf_sk_lookup context fields.
Signed-off-by: Jakub Sitnicki <[email protected]>
Signed-off-by: Alexei Starovoitov <[email protected]>
Link: https://lore.kernel.org/bpf/[email protected]
|
|
Make bpftool show human-friendly identifiers for newly introduced program
and attach type, BPF_PROG_TYPE_SK_LOOKUP and BPF_SK_LOOKUP, respectively.
Also, add the new prog type bash-completion, man page and help message.
Signed-off-by: Jakub Sitnicki <[email protected]>
Signed-off-by: Alexei Starovoitov <[email protected]>
Link: https://lore.kernel.org/bpf/[email protected]
|
|
Make libbpf aware of the newly added program type, and assign it a
section name.
Signed-off-by: Jakub Sitnicki <[email protected]>
Signed-off-by: Alexei Starovoitov <[email protected]>
Acked-by: Andrii Nakryiko <[email protected]>
Link: https://lore.kernel.org/bpf/[email protected]
|
|
Newly added program, context type and helper is used by tests in a
subsequent patch. Synchronize the header file.
Signed-off-by: Jakub Sitnicki <[email protected]>
Signed-off-by: Alexei Starovoitov <[email protected]>
Acked-by: Andrii Nakryiko <[email protected]>
Link: https://lore.kernel.org/bpf/[email protected]
|
|
Commit 01397e822af4 ("kunit: Fix TabError, remove defconfig code and
handle when there is no kunitconfig") and commit 45ba7a893ad8 ("kunit:
kunit_tool: Separate out config/build/exec/parse") introduced two
closely related issues which built off of each other: they excessively
created the build directory when not present and modified a constant
(constants in Python only exist by convention).
Together these issues broken a number of unit tests for KUnit tool, so
fix them.
Fixed up commit log to fic checkpatch commit description style error.
Shuah Khan <[email protected]>
Fixes: 01397e822af4 ("kunit: Fix TabError, remove defconfig code and handle when there is no kunitconfig")
Fixes: 45ba7a893ad8 ("kunit: kunit_tool: Separate out config/build/exec/parse")
Signed-off-by: Brendan Higgins <[email protected]>
Signed-off-by: Shuah Khan <[email protected]>
|
|
Commit ddbd60c779b4 ("kunit: use --build_dir=.kunit as default") changed
the default build directory for KUnit tests, but failed to update
associated unit tests for kunit_tool, so update them.
Fixes: ddbd60c779b4 ("kunit: use --build_dir=.kunit as default")
Signed-off-by: Brendan Higgins <[email protected]>
Signed-off-by: Shuah Khan <[email protected]>
|
|
Direct stderr to subprocess.STDOUT so error messages get included in the
subprocess.CalledProcessError exceptions output field. This results in
more meaningful error messages for the user.
This is already being done in the make_allyesconfig method. Do the same
for make_mrproper, make_olddefconfig, and make methods.
With this, failures on unclean trees [1] will give users an error
message that includes:
"The source tree is not clean, please run 'make ARCH=um mrproper'"
[1] https://bugzilla.kernel.org/show_bug.cgi?id=205219
Signed-off-by: Will Chen <[email protected]>
Reviewed-by: Brendan Higgins <[email protected]>
Tested-by: Brendan Higgins <[email protected]>
Signed-off-by: Shuah Khan <[email protected]>
|
|
When the selftest "step" counter grew beyond 255, non-fatal warnings
were being emitted, which is noisy and pointless. There are selftests
with more than 255 steps (especially those in loops, etc). Instead,
just cap "steps" to 254 and do not report the saturation.
Reported-by: Ralph Campbell <[email protected]>
Tested-by: Ralph Campbell <[email protected]>
Fixes: 9847d24af95c ("selftests/harness: Refactor XFAIL into SKIP")
Signed-off-by: Kees Cook <[email protected]>
Signed-off-by: Shuah Khan <[email protected]>
|
|
Fix ip_defrag.sh when CONFIG_NF_DEFRAG_IPV6=m:
$ sudo ./ip_defrag.sh
+ set -e
+ mktemp -u XXXXXX
+ readonly NETNS=ns-rGlXcw
+ trap cleanup EXIT
+ setup
+ ip netns add ns-rGlXcw
+ ip -netns ns-rGlXcw link set lo up
+ ip netns exec ns-rGlXcw sysctl -w net.ipv4.ipfrag_high_thresh=9000000
+ ip netns exec ns-rGlXcw sysctl -w net.ipv4.ipfrag_low_thresh=7000000
+ ip netns exec ns-rGlXcw sysctl -w net.ipv4.ipfrag_time=1
+ ip netns exec ns-rGlXcw sysctl -w net.ipv6.ip6frag_high_thresh=9000000
+ ip netns exec ns-rGlXcw sysctl -w net.ipv6.ip6frag_low_thresh=7000000
+ ip netns exec ns-rGlXcw sysctl -w net.ipv6.ip6frag_time=1
+ ip netns exec ns-rGlXcw sysctl -w net.netfilter.nf_conntrack_frag6_high_thresh=9000000
+ cleanup
+ ip netns del ns-rGlXcw
$ ls -la /proc/sys/net/netfilter/nf_conntrack_frag6_high_thresh
ls: cannot access '/proc/sys/net/netfilter/nf_conntrack_frag6_high_thresh': No such file or directory
$ sudo modprobe nf_defrag_ipv6
$ ls -la /proc/sys/net/netfilter/nf_conntrack_frag6_high_thresh
-rw-r--r-- 1 root root 0 Jul 14 12:34 /proc/sys/net/netfilter/nf_conntrack_frag6_high_thresh
Signed-off-by: Paolo Pisati <[email protected]>
Reviewed-by: Jakub Kicinski <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
There should be no difference between -1 and other negative syscalls
while tracing.
Cc: Andy Lutomirski <[email protected]>
Cc: Will Drewry <[email protected]>
Cc: Will Deacon <[email protected]>
Cc: Keno Fischer <[email protected]>
Signed-off-by: Kees Cook <[email protected]>
Signed-off-by: Shuah Khan <[email protected]>
|
|
Now that the selftest harness has variants, use them to eliminate a
bunch of copy/paste duplication.
Cc: Andy Lutomirski <[email protected]>
Cc: Will Drewry <[email protected]>
Cc: Jakub Kicinski <[email protected]>
Signed-off-by: Kees Cook <[email protected]>
Acked-by: Jakub Kicinski <[email protected]>
Signed-off-by: Shuah Khan <[email protected]>
|
|
The FIXTURE*() macro kern-doc examples had the wrong names for the C code
examples associated with them. Fix those and clarify that FIXTURE_DATA()
usage should be avoided.
Cc: Shuah Khan <[email protected]>
Cc: Jakub Kicinski <[email protected]>
Fixes: 74bc7c97fa88 ("kselftest: add fixture variants")
Signed-off-by: Kees Cook <[email protected]>
Reviewed-by: Jakub Kicinski <[email protected]>
Signed-off-by: Shuah Khan <[email protected]>
|
|
Make sure we don't regress the CAP_SYSLOG behavior of the module address
visibility via /proc/modules nor /sys/module/*/sections/*.
Cc: Luis Chamberlain <[email protected]>
Cc: Shuah Khan <[email protected]>
Cc: [email protected]
Signed-off-by: Kees Cook <[email protected]>
Reviewed-by: Luis Chamberlain <[email protected]>
Signed-off-by: Shuah Khan <[email protected]>
|
|
Rationale:
Reduces attack surface on kernel devs opening the links for MITM
as HTTPS traffic is much harder to manipulate.
Deterministic algorithm:
For each file:
If not .svg:
For each line:
If doesn't contain `\bxmlns\b`:
For each link, `\bhttp://[^# \t\r\n]*(?:\w|/)`:
If neither `\bgnu\.org/license`, nor `\bmozilla\.org/MPL\b`:
If both the HTTP and HTTPS versions
return 200 OK and serve the same content:
Replace HTTP with HTTPS.
Signed-off-by: Alexander A. Klimov <[email protected]>
Signed-off-by: Shuah Khan <[email protected]>
|
|
To pick up the changes from:
83d31e5271ac ("KVM: nVMX: fixes for preemption timer migration")
That don't entail changes in tooling.
This silences these tools/perf build warnings:
Warning: Kernel ABI header at 'tools/arch/x86/include/uapi/asm/kvm.h' differs from latest version at 'arch/x86/include/uapi/asm/kvm.h'
diff -u tools/arch/x86/include/uapi/asm/kvm.h arch/x86/include/uapi/asm/kvm.h
Cc: Adrian Hunter <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Paolo Bonzini <[email protected]>
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
To pick up the changes in:
b2f9f1535bb9 ("libbpf: Fix libbpf hashmap on (I)LP32 architectures")
Silencing this warning:
Warning: Kernel ABI header at 'tools/perf/util/hashmap.h' differs from latest version at 'tools/lib/bpf/hashmap.h'
diff -u tools/perf/util/hashmap.h tools/lib/bpf/hashmap.h
I'll eventually update the warning to remove the "Kernel ABI" part
and instead state libbpf when noticing that the original is at
"tools/lib/something".
Cc: Adrian Hunter <[email protected]>
Cc: Alexei Starovoitov <[email protected]>
Cc: Andrii Nakryiko <[email protected]>
Cc: Jakub Bogusz <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Namhyung Kim <[email protected]>
Ian Rogers <[email protected]>
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
Any option macro with _SET suffix should set opt->set variable which is
not happening for OPT_CALLBACK_SET(). This is causing issues with perf
record --switch-output-event. Fix that.
Before:
# ./perf record --overwrite -e sched:*switch,syscalls:sys_enter_mmap \
--switch-output-event syscalls:sys_enter_mmap
^C[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.297 MB perf.data (657 samples) ]
After:
$ ./perf record --overwrite -e sched:*switch,syscalls:sys_enter_mmap \
--switch-output-event syscalls:sys_enter_mmap
[ perf record: dump data: Woken up 1 times ]
[ perf record: Dump perf.data.2020061918144542 ]
[ perf record: dump data: Woken up 1 times ]
[ perf record: Dump perf.data.2020061918144608 ]
[ perf record: dump data: Woken up 1 times ]
[ perf record: Dump perf.data.2020061918144660 ]
^C[ perf record: dump data: Woken up 1 times ]
[ perf record: Dump perf.data.2020061918144784 ]
[ perf record: Woken up 0 times to write data ]
[ perf record: Dump perf.data.2020061918144803 ]
[ perf record: Captured and wrote 0.419 MB perf.data.<timestamp> ]
Fixes: 636eb4d001b1 ("libsubcmd: Introduce OPT_CALLBACK_SET()")
Signed-off-by: Ravi Bangoria <[email protected]>
Tested-by: Arnaldo Carvalho de Melo <[email protected]>
Cc: Jiri Olsa <[email protected]>
Link: http://lore.kernel.org/lkml/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
Add 'struct expr_id_data' to keep an expr value instead of just a simple
double pointer, so we can store more data for ID in the following
changes.
Signed-off-by: Jiri Olsa <[email protected]>
Acked-by: Ian Rogers <[email protected]>
Cc: Alexander Shishkin <[email protected]>
Cc: Andi Kleen <[email protected]>
Cc: John Garry <[email protected]>
Cc: Kajol Jain <[email protected]>
Cc: Michael Petlan <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Paul Clarke <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Stephane Eranian <[email protected]>
Link: http://lore.kernel.org/lkml/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
Rename expr__add_id() to expr__add_val() so we can use expr__add_id() to
actually add just the id without any value in following changes.
There's no functional change.
Signed-off-by: Jiri Olsa <[email protected]>
Acked-by: Ian Rogers <[email protected]>
Cc: Alexander Shishkin <[email protected]>
Cc: Andi Kleen <[email protected]>
Cc: John Garry <[email protected]>
Cc: Kajol Jain <[email protected]>
Cc: Michael Petlan <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Paul Clarke <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Stephane Eranian <[email protected]>
Link: http://lore.kernel.org/lkml/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
Warn if the probe target function is a GNU indirect function (GNU_IFUNC)
because it may not be what the user wants to probe.
The GNU indirect function ( https://sourceware.org/glibc/wiki/GNU_IFUNC )
is the dynamic symbol solved at runtime. An IFUNC function is a selector
which is invoked from the ELF loader, but the symbol address of the
function which will be modified by the IFUNC is the same as the IFUNC in
the symbol table. This can confuse users trying to probe such functions.
For example, memcpy is an IFUNC.
probe_libc:memcpy (on __new_memcpy_ifunc@x86_64/multiarch/memcpy.c in /usr/lib64/libc-2.30.so)
the probe is put on an IFUNC.
perf 1742 [000] 26201.715632: probe_libc:memcpy: (7fdaa53824c0)
7fdaa53824c0 __new_memcpy_ifunc+0x0 (inlined)
7fdaa5d4a980 elf_machine_rela+0x6c0 (inlined)
7fdaa5d4a980 elf_dynamic_do_Rela+0x6c0 (inlined)
7fdaa5d4a980 _dl_relocate_object+0x6c0 (/usr/lib64/ld-2.30.so)
7fdaa5d42155 dl_main+0x1cc5 (/usr/lib64/ld-2.30.so)
7fdaa5d5831a _dl_sysdep_start+0x54a (/usr/lib64/ld-2.30.so)
7fdaa5d3ffeb _dl_start_final+0x25b (inlined)
7fdaa5d3ffeb _dl_start+0x25b (/usr/lib64/ld-2.30.so)
7fdaa5d3f117 .annobin_rtld.c+0x7 (inlined)
And the event is invoked from the ELF loader instead of the target
program's main code.
Moreover, at this moment, we can not probe on the function which will
be selected by the IFUNC, because it is determined at runtime. But
uprobe will be prepared before running the target binary.
Thus, I decided to warn user when 'perf probe' detects that the probe
point is on an GNU IFUNC symbol. Someone who wants to probe an IFUNC
symbol to debug the IFUNC function can ignore this warning.
Committer notes:
I.e., this warning will be emitted if the probe point is an IFUNC:
"Warning: The probe function (%s) is a GNU indirect function.\n"
"Consider identifying the final function used at run time and set the probe directly on that.\n"
Complete set of steps:
# readelf -sW /lib64/libc-2.29.so | grep IFUNC | tail
22196: 0000000000109a80 183 IFUNC GLOBAL DEFAULT 14 __memcpy_chk
22214: 00000000000b7d90 191 IFUNC GLOBAL DEFAULT 14 __gettimeofday
22336: 000000000008b690 60 IFUNC GLOBAL DEFAULT 14 memchr
22350: 000000000008b9b0 89 IFUNC GLOBAL DEFAULT 14 __stpcpy
22420: 000000000008bb10 76 IFUNC GLOBAL DEFAULT 14 __strcasecmp_l
22582: 000000000008a970 60 IFUNC GLOBAL DEFAULT 14 strlen
22585: 00000000000a54d0 92 IFUNC WEAK DEFAULT 14 wmemset
22600: 000000000010b030 92 IFUNC GLOBAL DEFAULT 14 __wmemset_chk
22618: 000000000008b8a0 183 IFUNC GLOBAL DEFAULT 14 __mempcpy
22675: 000000000008ba70 76 IFUNC WEAK DEFAULT 14 strcasecmp
#
# perf probe -x /lib64/libc-2.29.so strlen
Warning: The probe function (strlen) is a GNU indirect function.
Consider identifying the final function used at run time and set the probe directly on that.
Added new event:
probe_libc:strlen (on strlen in /usr/lib64/libc-2.29.so)
You can now use it in all perf tools, such as:
perf record -e probe_libc:strlen -aR sleep 1
#
Reported-by: Andi Kleen <[email protected]>
Signed-off-by: Masami Hiramatsu <[email protected]>
Tested-by: Arnaldo Carvalho de Melo <[email protected]>
Cc: Andi Kleen <[email protected]>
Cc: Oleg Nesterov <[email protected]>
Cc: Srikar Dronamraju <[email protected]>
Link: http://lore.kernel.org/lkml/159438669349.62703.5978345670436126948.stgit@devnote2
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
Fix the memory leakage in debuginfo__find_trace_events() when the probe
point is not found in the debuginfo. If there is no probe point found in
the debuginfo, debuginfo__find_probes() will NOT return -ENOENT, but 0.
Thus the caller of debuginfo__find_probes() must check the tf.ntevs and
release the allocated memory for the array of struct probe_trace_event.
The current code releases the memory only if the debuginfo__find_probes()
hits an error but not checks tf.ntevs. In the result, the memory allocated
on *tevs are not released if tf.ntevs == 0.
This fixes the memory leakage by checking tf.ntevs == 0 in addition to
ret < 0.
Fixes: ff741783506c ("perf probe: Introduce debuginfo to encapsulate dwarf information")
Signed-off-by: Masami Hiramatsu <[email protected]>
Reviewed-by: Srikar Dronamraju <[email protected]>
Cc: Andi Kleen <[email protected]>
Cc: Oleg Nesterov <[email protected]>
Cc: [email protected]
Link: http://lore.kernel.org/lkml/159438668346.62703.10887420400718492503.stgit@devnote2
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
Fix a wrong "variable not found" warning when the probe point is not
found in the debuginfo.
Since the debuginfo__find_probes() can return 0 even if it does not find
given probe point in the debuginfo, fill_empty_trace_arg() can be called
with tf.ntevs == 0 and it can emit a wrong warning. To fix this, reject
ntevs == 0 in fill_empty_trace_arg().
E.g. without this patch;
# perf probe -x /lib64/libc-2.30.so -a "memcpy arg1=%di"
Failed to find the location of the '%di' variable at this address.
Perhaps it has been optimized out.
Use -V with the --range option to show '%di' location range.
Added new events:
probe_libc:memcpy (on memcpy in /usr/lib64/libc-2.30.so with arg1=%di)
probe_libc:memcpy (on memcpy in /usr/lib64/libc-2.30.so with arg1=%di)
You can now use it in all perf tools, such as:
perf record -e probe_libc:memcpy -aR sleep 1
With this;
# perf probe -x /lib64/libc-2.30.so -a "memcpy arg1=%di"
Added new events:
probe_libc:memcpy (on memcpy in /usr/lib64/libc-2.30.so with arg1=%di)
probe_libc:memcpy (on memcpy in /usr/lib64/libc-2.30.so with arg1=%di)
You can now use it in all perf tools, such as:
perf record -e probe_libc:memcpy -aR sleep 1
Fixes: cb4027308570 ("perf probe: Trace a magic number if variable is not found")
Reported-by: Andi Kleen <[email protected]>
Signed-off-by: Masami Hiramatsu <[email protected]>
Reviewed-by: Srikar Dronamraju <[email protected]>
Tested-by: Andi Kleen <[email protected]>
Cc: Oleg Nesterov <[email protected]>
Cc: [email protected]
Link: http://lore.kernel.org/lkml/159438667364.62703.2200642186798763202.stgit@devnote2
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
There is a case that several same-name symbols points to the same
address. In that case, 'perf probe' returns an error.
E.g.
# perf probe -x /lib64/libc-2.30.so -v -a "memcpy arg1=%di"
probe-definition(0): memcpy arg1=%di
symbol:memcpy file:(null) line:0 offset:0 return:0 lazy:(null)
parsing arg: arg1=%di into name:arg1 %di
1 arguments
symbol:setjmp file:(null) line:0 offset:0 return:0 lazy:(null)
symbol:longjmp file:(null) line:0 offset:0 return:0 lazy:(null)
symbol:longjmp_target file:(null) line:0 offset:0 return:0 lazy:(null)
symbol:lll_lock_wait_private file:(null) line:0 offset:0 return:0 lazy:(null)
symbol:memory_mallopt_arena_max file:(null) line:0 offset:0 return:0 lazy:(null)
symbol:memory_mallopt_arena_test file:(null) line:0 offset:0 return:0 lazy:(null)
symbol:memory_tunable_tcache_max_bytes file:(null) line:0 offset:0 return:0 lazy:(null)
symbol:memory_tunable_tcache_count file:(null) line:0 offset:0 return:0 lazy:(null)
symbol:memory_tunable_tcache_unsorted_limit file:(null) line:0 offset:0 return:0 lazy:(null)
symbol:memory_mallopt_trim_threshold file:(null) line:0 offset:0 return:0 lazy:(null)
symbol:memory_mallopt_top_pad file:(null) line:0 offset:0 return:0 lazy:(null)
symbol:memory_mallopt_mmap_threshold file:(null) line:0 offset:0 return:0 lazy:(null)
symbol:memory_mallopt_mmap_max file:(null) line:0 offset:0 return:0 lazy:(null)
symbol:memory_mallopt_perturb file:(null) line:0 offset:0 return:0 lazy:(null)
symbol:memory_mallopt_mxfast file:(null) line:0 offset:0 return:0 lazy:(null)
symbol:memory_heap_new file:(null) line:0 offset:0 return:0 lazy:(null)
symbol:memory_arena_reuse_free_list file:(null) line:0 offset:0 return:0 lazy:(null)
symbol:memory_arena_reuse file:(null) line:0 offset:0 return:0 lazy:(null)
symbol:memory_arena_reuse_wait file:(null) line:0 offset:0 return:0 lazy:(null)
symbol:memory_arena_new file:(null) line:0 offset:0 return:0 lazy:(null)
symbol:memory_arena_retry file:(null) line:0 offset:0 return:0 lazy:(null)
symbol:memory_sbrk_less file:(null) line:0 offset:0 return:0 lazy:(null)
symbol:memory_heap_free file:(null) line:0 offset:0 return:0 lazy:(null)
symbol:memory_heap_less file:(null) line:0 offset:0 return:0 lazy:(null)
symbol:memory_tcache_double_free file:(null) line:0 offset:0 return:0 lazy:(null)
symbol:memory_heap_more file:(null) line:0 offset:0 return:0 lazy:(null)
symbol:memory_sbrk_more file:(null) line:0 offset:0 return:0 lazy:(null)
symbol:memory_malloc_retry file:(null) line:0 offset:0 return:0 lazy:(null)
symbol:memory_memalign_retry file:(null) line:0 offset:0 return:0 lazy:(null)
symbol:memory_mallopt_free_dyn_thresholds file:(null) line:0 offset:0 return:0 lazy:(null)
symbol:memory_realloc_retry file:(null) line:0 offset:0 return:0 lazy:(null)
symbol:memory_calloc_retry file:(null) line:0 offset:0 return:0 lazy:(null)
symbol:memory_mallopt file:(null) line:0 offset:0 return:0 lazy:(null)
Open Debuginfo file: /usr/lib/debug/usr/lib64/libc-2.30.so.debug
Try to find probe point from debuginfo.
Opening /sys/kernel/debug/tracing//README write=0
Failed to find the location of the '%di' variable at this address.
Perhaps it has been optimized out.
Use -V with the --range option to show '%di' location range.
An error occurred in debuginfo analysis (-2).
Trying to use symbols.
Opening /sys/kernel/debug/tracing//uprobe_events write=1
Writing event: p:probe_libc/memcpy /usr/lib64/libc-2.30.so:0x914c0 arg1=%di
Writing event: p:probe_libc/memcpy /usr/lib64/libc-2.30.so:0x914c0 arg1=%di
Failed to write event: File exists
Error: Failed to add events. Reason: File exists (Code: -17)
You can see that perf tried to write completely the same probe
definition twice, which caused an error.
To fix this issue, check the symbol list and drop duplicated symbols
(which has the same symbol name and address) from it.
With this patch:
# perf probe -x /lib64/libc-2.30.so -a "memcpy arg1=%di"
Failed to find the location of the '%di' variable at this address.
Perhaps it has been optimized out.
Use -V with the --range option to show '%di' location range.
Added new events:
probe_libc:memcpy (on memcpy in /usr/lib64/libc-2.30.so with arg1=%di)
probe_libc:memcpy (on memcpy in /usr/lib64/libc-2.30.so with arg1=%di)
You can now use it in all perf tools, such as:
perf record -e probe_libc:memcpy -aR sleep 1
Committer notes:
Fix this build error on 32-bit arches by using PRIx64 for symbol->start,
that is an u64:
In file included from util/probe-event.c:27:
util/probe-event.c: In function 'find_probe_trace_events_from_map':
util/probe-event.c:2978:14: error: format '%lx' expects argument of type 'long unsigned int', but argument 5 has type 'u64' {aka 'long long unsigned int'} [-Werror=format=]
pr_debug("Found duplicated symbol %s @ %lx\n",
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
util/debug.h:17:21: note: in definition of macro 'pr_fmt'
#define pr_fmt(fmt) fmt
^~~
util/probe-event.c:2978:5: note: in expansion of macro 'pr_debug'
pr_debug("Found duplicated symbol %s @ %lx\n",
^~~~~~~~
Reported-by: Andi Kleen <[email protected]>
Signed-off-by: Masami Hiramatsu <[email protected]>
Reviewed-by: Srikar Dronamraju <[email protected]>
Cc: Andi Kleen <[email protected]>
Cc: Oleg Nesterov <[email protected]>
Link: http://lore.kernel.org/lkml/159438666401.62703.15196394835032087840.stgit@devnote2
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
Using uninitialized_var() is dangerous as it papers over real bugs[1]
(or can in the future), and suppresses unrelated compiler warnings
(e.g. "unused variable"). If the compiler thinks it is uninitialized,
either simply initialize the variable or make compiler changes.
As recommended[2] by[3] Linus[4], remove the macro. With the recent
change to disable -Wmaybe-uninitialized in v5.7 in commit 78a5255ffb6a
("Stop the ad-hoc games with -Wno-maybe-initialized"), this is likely
the best time to make this treewide change.
[1] https://lore.kernel.org/lkml/[email protected]/
[2] https://lore.kernel.org/lkml/CA+55aFw+Vbj0i=1TGqCR5vQkCzWJ0QxK6CernOU6eedsudAixw@mail.gmail.com/
[3] https://lore.kernel.org/lkml/CA+55aFwgbgqhbp1fkxvRKEpzyR5J8n1vKT1VZdz9knmPuXhOeg@mail.gmail.com/
[4] https://lore.kernel.org/lkml/CA+55aFz2500WfbKXAx8s67wrm9=yVJu65TpLgN_ybYNv0VEOKA@mail.gmail.com/
Suggested-by: Linus Torvalds <[email protected]>
Reviewed-by: Bart van Assche <[email protected]>
Reviewed-by: Miguel Ojeda <[email protected]>
Tested-by: Nathan Chancellor <[email protected]>
Tested-by: Sedat Dilek <[email protected]>
Signed-off-by: Kees Cook <[email protected]>
|
|
Drop doubled words "will" and "attach".
Signed-off-by: Randy Dunlap <[email protected]>
Signed-off-by: Daniel Borkmann <[email protected]>
Link: https://lore.kernel.org/bpf/[email protected]
|
|
Andrii reported that sockopt_inherit occasionally hangs up on 5.5 kernel [0].
This can happen if server_thread runs faster than the main thread.
In that case, pthread_cond_wait will wait forever because
pthread_cond_signal was executed before the main thread was blocking.
Let's move pthread_mutex_lock up a bit to make sure server_thread
runs strictly after the main thread goes to sleep.
(Not sure why this is 5.5 specific, maybe scheduling is less
deterministic? But I was able to confirm that it does indeed
happen in a VM.)
[0] https://lore.kernel.org/bpf/CAEf4BzY0-bVNHmCkMFPgObs=isUAyg-dFzGDY7QWYkmm7rmTSg@mail.gmail.com/
Reported-by: Andrii Nakryiko <[email protected]>
Signed-off-by: Stanislav Fomichev <[email protected]>
Signed-off-by: Daniel Borkmann <[email protected]>
Acked-by: Andrii Nakryiko <[email protected]>
Link: https://lore.kernel.org/bpf/[email protected]
|
|
Update version for changes released with v5.9 kernel release.
Signed-off-by: Srinivas Pandruvada <[email protected]>
|
|
Retry mail box command on failure. The default retry count is 3. This can
be changed by "-r|--retry" options. This helps during early bring up of
platforms.
Signed-off-by: Srinivas Pandruvada <[email protected]>
|
|
Add option "p|--pause" to introduce delay between two mail box commands
for test purpose. This delay can be specified in milliseconds. By default
there is no delay between two mailbox commands.
Signed-off-by: Srinivas Pandruvada <[email protected]>
|
|
When for some reason, CONFIG_TDP_GET_CORE_MASK mailbox command fails, then
don't continue online/offline operation for perf-profile set-config-level
with "-o" option.
Signed-off-by: Srinivas Pandruvada <[email protected]>
|
|
We want to cache the topology info to a file, which is not preserved
across boot cycle. The current storage in /tmp is getting preserved.
So change the path from /tmp/isst_cpu_topology.dat to
/var/run/isst_cpu_topology.dat.
Signed-off-by: Srinivas Pandruvada <[email protected]>
|
|
Similar to what have been done for DEVMAP, introduce tests to verify
ability to add a XDP program to an entry in a CPUMAP.
Verify CPUMAP programs can not be attached to devices as a normal
XDP program, and only programs with BPF_XDP_CPUMAP attach type can
be loaded in a CPUMAP.
Signed-off-by: Lorenzo Bianconi <[email protected]>
Signed-off-by: Daniel Borkmann <[email protected]>
Link: https://lore.kernel.org/bpf/9c632fcea5382ea7b4578bd06b6eddf382c3550b.1594734381.git.lorenzo@kernel.org
|
|
As for DEVMAP, support SEC("xdp_cpumap/") as a short cut for loading
the program with type BPF_PROG_TYPE_XDP and expected attach type
BPF_XDP_CPUMAP.
Signed-off-by: Lorenzo Bianconi <[email protected]>
Signed-off-by: Daniel Borkmann <[email protected]>
Acked-by: Jesper Dangaard Brouer <[email protected]>
Acked-by: Andrii Nakryiko <[email protected]>
Link: https://lore.kernel.org/bpf/33174c41993a6d860d9c7c1f280a2477ee39ed11.1594734381.git.lorenzo@kernel.org
|