| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Hi, fix some spelling errors in libbpf, the details are as follows:
-in the code comments:
termintaing->terminating
architecutre->architecture
requring->requiring
recored->recoded
sanitise->sanities
allowd->allowed
abover->above
see bpf_udst_arg()->see bpf_usdt_arg()
Signed-off-by: Lin Yikai <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Alexei Starovoitov <[email protected]>
|
|
Hi, fix some spelling errors in bpftool, the details are as follows:
-in file "bpftool-gen.rst"
libppf->libbpf
-in the code comments:
ouptut->output
Signed-off-by: Lin Yikai <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Alexei Starovoitov <[email protected]>
|
|
Hi, fix some spelling errors in selftest, the details are as follows:
-in the codes:
test_bpf_sk_stoarge_map_iter_fd(void)
->test_bpf_sk_storage_map_iter_fd(void)
load BTF from btf_data.o->load BTF from btf_data.bpf.o
-in the code comments:
preample->preamble
multi-contollers->multi-controllers
errono->errno
unsighed/unsinged->unsigned
egree->egress
shoud->should
regsiter->register
assummed->assumed
conditiona->conditional
rougly->roughly
timetamp->timestamp
ingores->ignores
null-termainted->null-terminated
slepable->sleepable
implemenation->implementation
veriables->variables
timetamps->timestamps
substitue a costant->substitute a constant
secton->section
unreferened->unreferenced
verifer->verifier
libppf->libbpf
...
Signed-off-by: Lin Yikai <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Alexei Starovoitov <[email protected]>
|
|
The idea is to run same test as for test_pid_filter_process, but instead
of standard fork-ed process we create the process with clone(CLONE_VM..)
to make sure the thread leader process filter works properly in this case.
Signed-off-by: Jiri Olsa <[email protected]>
Signed-off-by: Andrii Nakryiko <[email protected]>
Link: https://lore.kernel.org/bpf/[email protected]
|
|
The idea is to create and monitor 3 uprobes, each trigered in separate
process and make sure the bpf program gets executed just for the proper
PID specified via pid filter.
Signed-off-by: Jiri Olsa <[email protected]>
Signed-off-by: Andrii Nakryiko <[email protected]>
Link: https://lore.kernel.org/bpf/[email protected]
|
|
Adding child argument to spawn_child function to allow
to create multiple children in following change.
Signed-off-by: Jiri Olsa <[email protected]>
Signed-off-by: Andrii Nakryiko <[email protected]>
Link: https://lore.kernel.org/bpf/[email protected]
|
|
rm .*.cmd when make clean
Signed-off-by: zhangjiao <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Jonathan Cameron <[email protected]>
|
|
With uprobe_unregister() having grown a synchronize_srcu(), it becomes
fairly slow to call. Esp. since both users of this API call it in a
loop.
Peel off the sync_srcu() and do it once, after the loop.
We also need to add uprobe_unregister_sync() into uprobe_register()'s
error handling path, as we need to be careful about returning to the
caller before we have a guarantee that partially attached consumer won't
be called anymore. This is an unlikely slow path and this should be
totally fine to be slow in the case of a failed attach.
Signed-off-by: Peter Zijlstra (Intel) <[email protected]>
Signed-off-by: "Peter Zijlstra (Intel)" <[email protected]>
Co-developed-by: Andrii Nakryiko <[email protected]>
Signed-off-by: Andrii Nakryiko <[email protected]>
Signed-off-by: Peter Zijlstra (Intel) <[email protected]>
Reviewed-by: Oleg Nesterov <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
|
|
Filter out nodes that have one of its ancestors disabled as they aren't
expected to probe.
This removes the following false-positive failures on the
sc7180-trogdor-lazor-limozeen-nots-r5 platform:
/soc@0/geniqup@8c0000/i2c@894000/proximity@28
/soc@0/geniqup@ac0000/spi@a90000/ec@0
/soc@0/remoteproc@62400000/glink-edge/apr
/soc@0/remoteproc@62400000/glink-edge/apr/service@3
/soc@0/remoteproc@62400000/glink-edge/apr/service@4
/soc@0/remoteproc@62400000/glink-edge/apr/service@4/clock-controller
/soc@0/remoteproc@62400000/glink-edge/apr/service@4/dais
/soc@0/remoteproc@62400000/glink-edge/apr/service@7
/soc@0/remoteproc@62400000/glink-edge/apr/service@7/dais
/soc@0/remoteproc@62400000/glink-edge/apr/service@8
/soc@0/remoteproc@62400000/glink-edge/apr/service@8/routing
/soc@0/remoteproc@62400000/glink-edge/fastrpc
/soc@0/remoteproc@62400000/glink-edge/fastrpc/compute-cb@3
/soc@0/remoteproc@62400000/glink-edge/fastrpc/compute-cb@4
/soc@0/remoteproc@62400000/glink-edge/fastrpc/compute-cb@5
/soc@0/spmi@c440000/pmic@0/pon@800/pwrkey
Fixes: 14571ab1ad21 ("kselftest: Add new test for detecting unprobed Devicetree devices")
Signed-off-by: Nícolas F. R. A. Prado <[email protected]>
Link: https://lore.kernel.org/r/20240729-dt-kselftest-parent-disabled-v2-1-d7a001c4930d@collabora.com
Signed-off-by: Rob Herring (Arm) <[email protected]>
|
|
ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/shuah/linux
Merge a cpupower utility update for 6.12 from Shuah Khan:
"This cpupower update for Linux 6.12-rc1 consists of an enhancement
to cpuidle tool to display the residency value of cpuidle states.
This addition provides a clearer and more detailed view of idle
state information when using cpuidle-info."
* tag 'linux-cpupower-6.12-rc1' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/shuah/linux:
tools/cpupower: display residency value in idle-info
|
|
This also refreshes the -rc1 based branch to -rc5.
Signed-off-by: Ingo Molnar <[email protected]>
|
|
rm .*.cmd when make clean
Signed-off-by: zhang jiao <[email protected]>
Reviewed-by: Saurabh Sengar <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Wei Liu <[email protected]>
Message-ID: <[email protected]>
|
|
On RV64, as Ilya mentioned before [0], the first syscall parameter should be
accessed through orig_a0 (see arch/riscv64/include/asm/syscall.h),
otherwise it will cause selftests like bpf_syscall_macro, vmlinux,
test_lsm, etc. to fail on RV64. Let's fix it by using the struct pt_regs
style CO-RE direct access.
Signed-off-by: Pu Lehui <[email protected]>
Signed-off-by: Andrii Nakryiko <[email protected]>
Link: https://lore.kernel.org/bpf/[email protected] [0]
Link: https://lore.kernel.org/bpf/[email protected]
|
|
Considering that CO-RE direct read access to the first system call
argument is already available on s390 and arm64, let's enable
test_bpf_syscall_macro:syscall_arg1 on these architectures.
Signed-off-by: Pu Lehui <[email protected]>
Signed-off-by: Andrii Nakryiko <[email protected]>
Link: https://lore.kernel.org/bpf/[email protected]
|
|
Currently PT_REGS_PARM1 SYSCALL(x) is consistent with PT_REGS_PARM1_CORE
SYSCALL(x), which will introduce the overhead of BPF_CORE_READ(), taking
into account the read pt_regs comes directly from the context, let's use
CO-RE direct read to access the first system call argument.
Suggested-by: Andrii Nakryiko <[email protected]>
Signed-off-by: Pu Lehui <[email protected]>
Signed-off-by: Andrii Nakryiko <[email protected]>
Acked-by: Xu Kuohai <[email protected]>
Link: https://lore.kernel.org/bpf/[email protected]
|
|
Currently PT_REGS_PARM1 SYSCALL(x) is consistent with PT_REGS_PARM1_CORE
SYSCALL(x), which will introduce the overhead of BPF_CORE_READ(), taking
into account the read pt_regs comes directly from the context, let's use
CO-RE direct read to access the first system call argument.
Suggested-by: Andrii Nakryiko <[email protected]>
Signed-off-by: Pu Lehui <[email protected]>
Signed-off-by: Andrii Nakryiko <[email protected]>
Link: https://lore.kernel.org/bpf/[email protected]
|
|
Replace comma between expressions with semicolons.
Using a ',' in place of a ';' can have unintended side effects.
Although that is not the case here, it is seems best to use ';'
unless ',' is intended.
Found by inspection.
No functional change intended.
Compile tested only.
Signed-off-by: Chen Ni <[email protected]>
Reviewed-by: Simon Horman <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
The core part of the selftest, i.e., the je <-> jmp cycle, mimics the
original sched-ext bpf program. The test will fail without the
previous patch.
I tried to create some cases for other potential cycles
(je <-> je, jmp <-> je and jmp <-> jmp) with similar pattern
to the test in this patch, but failed. So this patch
only contains one test for je <-> jmp cycle.
Signed-off-by: Yonghong Song <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Alexei Starovoitov <[email protected]>
|
|
Pull bpf/master to receive baebe9aaba1e ("bpf: allow passing struct
bpf_iter_<type> as kfunc arguments") and related changes in preparation for
the DSQ iterator patchset.
Signed-off-by: Tejun Heo <[email protected]>
|
|
Fix eventfs ownership testcase to find mount point if stat -c "%m" failed.
This can happen on the system based on busybox. In this case, this will
try to use the current working directory, which should be a tracefs top
directory (and eventfs is mounted as a part of tracefs.)
If it does not work, the test is skipped as UNRESOLVED because of
the environmental problem.
Fixes: ee9793be08b1 ("tracing/selftests: Add ownership modification tests for eventfs")
Signed-off-by: Masami Hiramatsu (Google) <[email protected]>
Acked-by: Steven Rostedt (Google) <[email protected]>
Signed-off-by: Shuah Khan <[email protected]>
|
|
This patch adds scx_flatcg example scheduler which implements hierarchical
weight-based cgroup CPU control by flattening the cgroup hierarchy into a
single layer by compounding the active weight share at each level.
This flattening of hierarchy can bring a substantial performance gain when
the cgroup hierarchy is nested multiple levels. in a simple benchmark using
wrk[8] on apache serving a CGI script calculating sha1sum of a small file,
it outperforms CFS by ~3% with CPU controller disabled and by ~10% with two
apache instances competing with 2:1 weight ratio nested four level deep.
However, the gain comes at the cost of not being able to properly handle
thundering herd of cgroups. For example, if many cgroups which are nested
behind a low priority parent cgroup wake up around the same time, they may
be able to consume more CPU cycles than they are entitled to. In many use
cases, this isn't a real concern especially given the performance gain.
Also, there are ways to mitigate the problem further by e.g. introducing an
extra scheduling layer on cgroup delegation boundaries.
v5: - Updated to specify SCX_OPS_HAS_CGROUP_WEIGHT instead of
SCX_OPS_KNOB_CGROUP_WEIGHT.
v4: - Revert reference counted kptr for cgv_node as the change caused easily
reproducible stalls.
v3: - Updated to reflect the core API changes including ops.init/exit_task()
and direct dispatch from ops.select_cpu(). Fixes and improvements
including additional statistics.
- Use reference counted kptr for cgv_node instead of xchg'ing against
stash location.
- Dropped '-p' option.
v2: - Use SCX_BUG[_ON]() to simplify error handling.
Signed-off-by: Tejun Heo <[email protected]>
Reviewed-by: David Vernet <[email protected]>
Acked-by: Josh Don <[email protected]>
Acked-by: Hao Luo <[email protected]>
Acked-by: Barret Rhoden <[email protected]>
|
|
Add sched_ext_ops operations to init/exit cgroups, and track task migrations
and config changes. A BPF scheduler may not implement or implement only
subset of cgroup features. The implemented features can be indicated using
%SCX_OPS_HAS_CGOUP_* flags. If cgroup configuration makes use of features
that are not implemented, a warning is triggered.
While a BPF scheduler is being enabled and disabled, relevant cgroup
operations are locked out using scx_cgroup_rwsem. This avoids situations
like task prep taking place while the task is being moved across cgroups,
making things easier for BPF schedulers.
v7: - cgroup interface file visibility toggling is dropped in favor just
warning messages. Dynamically changing interface visiblity caused more
confusion than helping.
v6: - Updated to reflect the removal of SCX_KF_SLEEPABLE.
- Updated to use CONFIG_GROUP_SCHED_WEIGHT and fixes for
!CONFIG_FAIR_GROUP_SCHED && CONFIG_EXT_GROUP_SCHED.
v5: - Flipped the locking order between scx_cgroup_rwsem and
cpus_read_lock() to avoid locking order conflict w/ cpuset. Better
documentation around locking.
- sched_move_task() takes an early exit if the source and destination
are identical. This triggered the warning in scx_cgroup_can_attach()
as it left p->scx.cgrp_moving_from uncleared. Updated the cgroup
migration path so that ops.cgroup_prep_move() is skipped for identity
migrations so that its invocations always match ops.cgroup_move()
one-to-one.
v4: - Example schedulers moved into their own patches.
- Fix build failure when !CONFIG_CGROUP_SCHED, reported by Andrea Righi.
v3: - Make scx_example_pair switch all tasks by default.
- Convert to BPF inline iterators.
- scx_bpf_task_cgroup() is added to determine the current cgroup from
CPU controller's POV. This allows BPF schedulers to accurately track
CPU cgroup membership.
- scx_example_flatcg added. This demonstrates flattened hierarchy
implementation of CPU cgroup control and shows significant performance
improvement when cgroups which are nested multiple levels are under
competition.
v2: - Build fixes for different CONFIG combinations.
Signed-off-by: Tejun Heo <[email protected]>
Reviewed-by: David Vernet <[email protected]>
Acked-by: Josh Don <[email protected]>
Acked-by: Hao Luo <[email protected]>
Acked-by: Barret Rhoden <[email protected]>
Reported-by: kernel test robot <[email protected]>
Cc: Andrea Righi <[email protected]>
|
|
The ARRAY_SIZE macro is more compact and more formal in linux source.
Signed-off-by: Feng Yang <[email protected]>
Signed-off-by: Andrii Nakryiko <[email protected]>
Link: https://lore.kernel.org/bpf/[email protected]
|
|
Add selftest for cases where btf_name_valid_section() does not properly
check for certain types of names.
Suggested-by: Eduard Zingerman <[email protected]>
Signed-off-by: Jeongjun Park <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Alexei Starovoitov <[email protected]>
Acked-by: Eduard Zingerman <[email protected]>
|
|
Fix two inconsistencies in feature names as discussed in [1]:
1. Rename "dwarf-unwind-support" to "dwarf-unwind"
2. 'get_cpuid' feature and 'HAVE_AUXTRACE_SUPPORT' names don't
look related, change the feature name to 'auxtrace' to match the
macro name, as 'get_cpuid' string is not used anywhere to check the
feature presence
[1]: https://lore.kernel.org/linux-perf-users/ZoRw5we4HLSTZND6@x1/
Suggested-by: Arnaldo Carvalho de Melo <[email protected]>
Signed-off-by: Aditya Gupta <[email protected]>
Cc: Athira Rajeev <[email protected]>
Cc: Disha Goel <[email protected]>
Cc: Ian Rogers <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Kajol Jain <[email protected]>
Cc: Madhavan Srinivasan <[email protected]>
Cc: Namhyung Kim <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
In probe_vfs_getname.sh, current we use "perf record --dry-run"
to check for libtraceevent and skip the test if perf is not
build with libtraceevent. Change the check to use "perf check feature"
option
Signed-off-by: Athira Rajeev <[email protected]>
Acked-by: Namhyung Kim <[email protected]>
Cc: Disha Goel <[email protected]>
Cc: Ian Rogers <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Kajol Jain <[email protected]>
Cc: Madhavan Srinivasan <[email protected]>
Cc: Namhyung Kim <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
Currently we use output of 'perf version --build-options', to check
whether perf was built with libtraceevent support.
Instead, use 'perf check feature libtraceevent' to check for
libtraceevent support.
Reviewed-by: Athira Rajeev <[email protected]>
Signed-off-by: Aditya Gupta <[email protected]>
Acked-by: Namhyung Kim <[email protected]>
Cc: Disha Goel <[email protected]>
Cc: Ian Rogers <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Kajol Jain <[email protected]>
Cc: Madhavan Srinivasan <[email protected]>
Cc: Namhyung Kim <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
Now that the feature list has been duplicated in a global
'supported_features' array, use that array instead of manually checking
status of built-in features.
This helps in being consistent with commands such as 'perf check feature',
so commands can use the same array, and any new feature can be added at
one place, in the 'supported_features' array
Reviewed-by: Athira Rajeev <[email protected]>
Signed-off-by: Aditya Gupta <[email protected]>
Acked-by: Namhyung Kim <[email protected]>
Cc: Disha Goel <[email protected]>
Cc: Ian Rogers <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Kajol Jain <[email protected]>
Cc: Madhavan Srinivasan <[email protected]>
Cc: Namhyung Kim <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/perf/perf-tools
Pull perf tools fixes from Namhyung Kim:
"A number of small fixes for the late cycle:
- Two more build fixes on 32-bit archs
- Fixed a segfault during perf test
- Fixed spinlock/rwlock accounting bug in perf lock contention"
* tag 'perf-tools-fixes-for-v6.11-2024-09-04' of git://git.kernel.org/pub/scm/linux/kernel/git/perf/perf-tools:
perf daemon: Fix the build on more 32-bit architectures
perf python: include "util/sample.h"
perf lock contention: Fix spinlock and rwlock accounting
perf test pmu: Set uninitialized PMU alias to null
|
|
Some distros have grub2 config files with the lines
if [ x"${feature_menuentry_id}" = xy ]; then
menuentry_id_option="--id"
else
menuentry_id_option=""
fi
which match the skip regex defined for grub2 in get_grub_index():
$skip = '^\s*menuentry';
These false positives cause the grub number to be higher than it
should be, and the wrong kernel can end up booting.
Grub documents the menuentry command with whitespace between it and the
title, so make the skip regex reflect this.
Link: https://lore.kernel.org/[email protected]
Signed-off-by: Daniel Jordan <[email protected]>
Acked-by: John 'Warthog9' Hawley (Tenstorrent) <[email protected]>
Signed-off-by: Steven Rostedt <[email protected]>
|
|
If a warning happens at build, give a warning at the end:
Build time: 1 minute 40 seconds
Install time: 17 seconds
Reboot time: 25 seconds
*** WARNING found in build: 1 ***
*******************************************
*******************************************
KTEST RESULT: TEST 1 SUCCESS!!!! **
*******************************************
*******************************************
This way, even if the test isn't made to fail on warnings during the
build, a message is still displayed that warnings were found.
Link: https://lore.kernel.org/<[email protected]>
Acked-by: John 'Warthog9' Hawley (Tenstorrent) <[email protected]>
Signed-off-by: Steven Rostedt <[email protected]>
|
|
When the PROCMAP_QUERY is not defined, a compilation error occurs due to the
mismatch of the procmap_query()'s params, procmap_query() only be called in
the file where the function is defined, modify the params so they can match.
We get a warning when build samples/bpf:
trace_helpers.c:252:5: warning: no previous prototype for ‘procmap_query’ [-Wmissing-prototypes]
252 | int procmap_query(int fd, const void *addr, __u32 query_flags, size_t *start, size_t *offset, int *flags)
| ^~~~~~~~~~~~~
As this function is only used in the file, mark it as 'static'.
Fixes: 4e9e07603ecd ("selftests/bpf: make use of PROCMAP_QUERY ioctl if available")
Signed-off-by: Yuan Chen <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Alexei Starovoitov <[email protected]>
|
|
The unsigned int should use "%u" instead of "%d".
Signed-off-by: zhang jiao <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Mark Brown <[email protected]>
|
|
When restricting jevents generated json lookup code with JEVENTS_MODEL
a list of models must be provided. Some builds don't know model names
but know cpuids. Add a command that can convert a cpuid to a model
using mapfile.csv files. This can be used with JEVENTS_MODEL like:
$ make JEVENTS_MODEL=`./pmu-events/models.py x86 'GenuineIntel-6-8D-1,AuthenticAMD-26-1' pmu-events/arch/`
Committer testing:
$ tools/perf/pmu-events/models.py x86 'GenuineIntel-6-8D-1,AuthenticAMD-26-1' tools/perf/pmu-events/arch/
tigerlake,amdzen5
$ perf stat -v sleep 1 |& head -1
Using CPUID GenuineIntel-6-B7-1
$ tools/perf/pmu-events/models.py x86 'GenuineIntel-6-B7-1' tools/perf/pmu-events/arch/
alderlake
$
Signed-off-by: Ian Rogers <[email protected]>
Tested-by: Arnaldo Carvalho de Melo <[email protected]>
Cc: Adrian Hunter <[email protected]>
Cc: Alexander Shishkin <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Kan Liang <[email protected]>
Cc: Mark Rutland <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
Currently the presence of a feature is checked with a combination of
perf version --build-options and greps, such as:
perf version --build-options | grep " on .* HAVE_FEATURE"
Instead of this, introduce a subcommand "perf check feature", with which
scripts can test for presence of a feature, such as:
perf check feature HAVE_FEATURE
'perf check feature' command is expected to have exit status of 0 if
feature is built-in, and 1 if it's not built-in or if feature is not known.
Multiple features can also be passed as a comma-separated list, in which
case the exit status will be 1 only if all of the passed features are
built-in. For example, with below command, it will have exit status of 0
only if both libtraceevent and bpf are enabled, else 1 in all other cases
perf check feature libtraceevent,bpf
The arguments are case-insensitive.
An array 'supported_features' has also been introduced that can be used by
other commands like 'perf version --build-options', so that new features
can be added in one place, with the array
Committer testing:
$ perf check feature libtraceevent,bpf
libtraceevent: [ on ] # HAVE_LIBTRACEEVENT
bpf: [ on ] # HAVE_LIBBPF_SUPPORT
$ perf check feature libtraceevent
libtraceevent: [ on ] # HAVE_LIBTRACEEVENT
$ perf check feature bpf
bpf: [ on ] # HAVE_LIBBPF_SUPPORT
$ perf check -q feature bpf && echo "BPF support is present"
BPF support is present
$ perf check -q feature Bogus && echo "Bogus support is present"
$
Reviewed-by: Athira Rajeev <[email protected]>
Signed-off-by: Aditya Gupta <[email protected]>
Tested-by: Arnaldo Carvalho de Melo <[email protected]>
Cc: Athira Rajeev <[email protected]>
Cc: Disha Goel <[email protected]>
Cc: Ian Rogers <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Kajol Jain <[email protected]>
Cc: Madhavan Srinivasan <[email protected]>
Cc: Namhyung Kim <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
Currently, commands which depend on 'parse_options_subcommand()' don't
show the usage string, and instead show '(null)'
$ ./perf sched
Usage: (null)
-D, --dump-raw-trace dump raw trace in ASCII
-f, --force don't complain, do it
-i, --input <file> input file name
-v, --verbose be more verbose (show symbol address, etc)
'parse_options_subcommand()' is generally expected to initialise the usage
string, with information in the passed 'subcommands[]' array
This behaviour was changed in:
230a7a71f92212e7 ("libsubcmd: Fix parse-options memory leak")
Where the generated usage string is deallocated, and usage[0] string is
reassigned as NULL.
As discussed in [1], free the allocated usage string in the main
function itself, and don't reset usage string to NULL in
parse_options_subcommand
With this change, the behaviour is restored.
$ ./perf sched
Usage: perf sched [<options>] {record|latency|map|replay|script|timehist}
-D, --dump-raw-trace dump raw trace in ASCII
-f, --force don't complain, do it
-i, --input <file> input file name
-v, --verbose be more verbose (show symbol address, etc)
[1]: https://lore.kernel.org/linux-perf-users/htq5vhx6piet4nuq2mmhk7fs2bhfykv52dbppwxmo3s7du2odf@styd27tioc6e/
Fixes: 230a7a71f92212e7 ("libsubcmd: Fix parse-options memory leak")
Suggested-by: Namhyung Kim <[email protected]>
Signed-off-by: Aditya Gupta <[email protected]>
Acked-by: Namhyung Kim <[email protected]>
Tested-by: Arnaldo Carvalho de Melo <[email protected]>
Cc: Athira Rajeev <[email protected]>
Cc: Disha Goel <[email protected]>
Cc: Ian Rogers <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Kajol Jain <[email protected]>
Cc: Madhavan Srinivasan <[email protected]>
Cc: Namhyung Kim <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
On arm64 the breakpoint length should be 4-bytes but 8-bytes is
tolerated as perf passes that as sizeof(long). Just pass the correct
value.
On i386 the sizeof(long) check in the kernel needs to match the
kernel's long size. Check using an environment (uname checks) whether
4 or 8 bytes needs to be passed. Cache the value in a static.
Signed-off-by: Ian Rogers <[email protected]>
Cc: Adrian Hunter <[email protected]>
Cc: Alexander Shishkin <[email protected]>
Cc: Athira Rajeev <[email protected]>
Cc: Chaitanya S Prakash <[email protected]>
Cc: Colin Ian King <[email protected]>
Cc: Dominique Martinet <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: James Clark <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: John Garry <[email protected]>
Cc: Junhao He <[email protected]>
Cc: Kan Liang <[email protected]>
Cc: Mark Rutland <[email protected]>
Cc: Masami Hiramatsu <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Yang Jihong <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
The default breakpoint length is "sizeof(long)" however this is
incorrect on platforms like Aarch64 where sizeof(long) is 8 but the
breakpoint length is 4. Add a helper function that can be used to
determine the correct breakpoint length, in this change it just
returns the existing default sizeof(long) value.
Use the helper in the bp_account test so that, when modifying the
event from a watchpoint to a breakpoint, the breakpoint length is
appropriate for the architecture and not just sizeof(long).
Signed-off-by: Ian Rogers <[email protected]>
Cc: Adrian Hunter <[email protected]>
Cc: Alexander Shishkin <[email protected]>
Cc: Athira Rajeev <[email protected]>
Cc: Chaitanya S Prakash <[email protected]>
Cc: Colin Ian King <[email protected]>
Cc: Dominique Martinet <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: James Clark <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: John Garry <[email protected]>
Cc: Junhao He <[email protected]>
Cc: Kan Liang <[email protected]>
Cc: Mark Rutland <[email protected]>
Cc: Masami Hiramatsu <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Yang Jihong <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
- Standardize directory variables to support more flexible installations.
- Add copyright and licensing information to the Makefile.
- Introduce ".PHONY" declarations to ensure that specific targets are always
executed, regardless of the presence of files with matching names.
- Add a help target to provide usage instructions.
Signed-off-by: Amit Vadhavana <[email protected]>
Acked-by: Todd Brandt <[email protected]>
Link: https://patch.msgid.link/Update directory handling and installation process in Makefile
[ rjw: Changelog edits ]
Signed-off-by: Rafael J. Wysocki <[email protected]>
|
|
By default, sleepgraph.py creates suspend-{date}-{time} directories
to store artifacts, or suspend-{date}-{time}-xN if the --multi option
is used.
Ignore those directories by adding a .gitignore file.
Signed-off-by: Yo-Jung (Leo) Lin <[email protected]>
Acked-by: Todd Brandt <[email protected]>
Link: https://patch.msgid.link/[email protected]
[ rjw: Subject and changelog edits ]
Signed-off-by: Rafael J. Wysocki <[email protected]>
|
|
Add the SO_PEEK_OFF selftest for UDP. In this patch, I mainly do
three things:
1. rename tcp_so_peek_off.c
2. adjust for UDP protocol
3. add selftests into it
Suggested-by: Jon Maloy <[email protected]>
Reviewed-by: Willem de Bruijn <[email protected]>
Signed-off-by: Jason Xing <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
Ensure that we get signal context for POR_EL0 if and only if POE is present
on the system.
Copied from the TPIDR2 test.
Signed-off-by: Joey Gouly <[email protected]>
Cc: Catalin Marinas <[email protected]>
Cc: Will Deacon <[email protected]>
Cc: Mark Brown <[email protected]>
Cc: Shuah Khan <[email protected]>
Reviewed-by: Mark Brown <[email protected]>
Acked-by: Shuah Khan <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Will Deacon <[email protected]>
|
|
Teach the signal frame parsing about the new POE frame, avoids warning when it
is generated.
Signed-off-by: Joey Gouly <[email protected]>
Cc: Catalin Marinas <[email protected]>
Cc: Will Deacon <[email protected]>
Cc: Mark Brown <[email protected]>
Cc: Shuah Khan <[email protected]>
Reviewed-by: Mark Brown <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Will Deacon <[email protected]>
|
|
Check that when POE is enabled, the POR_EL0 register is accessible.
Signed-off-by: Joey Gouly <[email protected]>
Cc: Catalin Marinas <[email protected]>
Cc: Will Deacon <[email protected]>
Cc: Mark Brown <[email protected]>
Cc: Shuah Khan <[email protected]>
Reviewed-by: Mark Brown <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Will Deacon <[email protected]>
|
|
The encoding of the pkey register differs on arm64, than on x86/ppc. On those
platforms, a bit in the register is used to disable permissions, for arm64, a
bit enabled in the register indicates that the permission is allowed.
This drops two asserts of the form:
assert(read_pkey_reg() <= orig_pkey_reg);
Because on arm64 this doesn't hold, due to the encoding.
The pkey must be reset to both access allow and write allow in the signal
handler. pkey_access_allow() works currently for PowerPC as the
PKEY_DISABLE_ACCESS and PKEY_DISABLE_WRITE have overlapping bits set.
Access to the uc_mcontext is abstracted, as arm64 has a different structure.
Signed-off-by: Joey Gouly <[email protected]>
Cc: Catalin Marinas <[email protected]>
Cc: Will Deacon <[email protected]>
Cc: Andrew Morton <[email protected]>
Cc: Shuah Khan <[email protected]>
Cc: Dave Hansen <[email protected]>
Cc: Aneesh Kumar K.V <[email protected]>
Acked-by: Dave Hansen <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Will Deacon <[email protected]>
|
|
arm64's fpregs are not at a constant offset from sigcontext. Since this is
not an important part of the test, don't print the fpregs pointer on arm64.
Signed-off-by: Joey Gouly <[email protected]>
Cc: Catalin Marinas <[email protected]>
Cc: Will Deacon <[email protected]>
Cc: Andrew Morton <[email protected]>
Cc: Shuah Khan <[email protected]>
Cc: Dave Hansen <[email protected]>
Cc: Aneesh Kumar K.V <[email protected]>
Acked-by: Dave Hansen <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Will Deacon <[email protected]>
|
|
Put this function in the header so that it can be used by other tests, without
needing to link to testcases.c.
This will be used by selftest/mm/protection_keys.c
Signed-off-by: Joey Gouly <[email protected]>
Cc: Catalin Marinas <[email protected]>
Cc: Will Deacon <[email protected]>
Cc: Andrew Morton <[email protected]>
Cc: Shuah Khan <[email protected]>
Cc: Dave Hansen <[email protected]>
Cc: Aneesh Kumar K.V <[email protected]>
Reviewed-by: Mark Brown <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Will Deacon <[email protected]>
|
|
Add new system registers:
- POR_EL1
- POR_EL0
Signed-off-by: Joey Gouly <[email protected]>
Cc: Catalin Marinas <[email protected]>
Cc: Will Deacon <[email protected]>
Cc: Marc Zyngier <[email protected]>
Cc: Oliver Upton <[email protected]>
Cc: Shuah Khan <[email protected]>
Reviewed-by: Mark Brown <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Will Deacon <[email protected]>
|
|
fd03c5b85855 ("sched: Rework pick_next_task()") changed the definition of
pick_next_task() from:
pick_next_task() := pick_task() + set_next_task(.first = true)
to:
pick_next_task(prev) := pick_task() + put_prev_task() + set_next_task(.first = true)
making invoking put_prev_task() pick_next_task()'s responsibility. This
reordering allows pick_task() to be shared between regular and core-sched
paths and put_prev_task() to know the next task.
sched_ext depended on put_prev_task_scx() enqueueing the current task before
pick_next_task_scx() is called. While pulling sched/core changes,
70cc76aa0d80 ("Merge branch 'tip/sched/core' into for-6.12") added an
explicit put_prev_task_scx() call for SCX tasks in pick_next_task_scx()
before picking the first task as a workaround.
Clean it up and adopt the conventions that other sched classes are
following.
The operation of keeping running the current task was spread and required
the task to be put on the local DSQ before picking:
- balance_one() used SCX_TASK_BAL_KEEP to indicate that the task is still
runnable, hasn't exhausted its slice, and thus should keep running.
- put_prev_task_scx() enqueued the task to local DSQ if SCX_TASK_BAL_KEEP
is set. It also called do_enqueue_task() with SCX_ENQ_LAST if it is the
only runnable task. do_enqueue_task() in turn decided whether to use the
local DSQ depending on SCX_OPS_ENQ_LAST.
Consolidate the logic in balance_one() as it always knows whether it is
going to keep the current task. balance_one() now considers all conditions
where the current task should be kept and uses SCX_TASK_BAL_KEEP to tell
pick_next_task_scx() to keep the current task instead of picking one from
the local DSQ. Accordingly, SCX_ENQ_LAST handling is removed from
put_prev_task_scx() and do_enqueue_task() and pick_next_task_scx() is
updated to pick the current task if SCX_TASK_BAL_KEEP is set.
The workaround put_prev_task[_scx]() calls are replaced with
put_prev_set_next_task().
This causes two behavior changes observable from the BPF scheduler:
- When a task keep running, it no longer goes through enqueue/dequeue cycle
and thus ops.stopping/running() transitions. The new behavior is better
and all the existing schedulers should be able to handle the new behavior.
- The BPF scheduler cannot keep executing the current task by enqueueing
SCX_ENQ_LAST task to the local DSQ. If SCX_OPS_ENQ_LAST is specified, the
BPF scheduler is responsible for resuming execution after each
SCX_ENQ_LAST. SCX_OPS_ENQ_LAST is mostly useful for cases where scheduling
decisions are not made on the local CPU - e.g. central or userspace-driven
schedulin - and the new behavior is more logical and shouldn't pose any
problems. SCX_OPS_ENQ_LAST demonstration from scx_qmap is dropped as it
doesn't fit that well anymore and the last task handling is moved to the
end of qmap_dispatch().
Signed-off-by: Tejun Heo <[email protected]>
Cc: David Vernet <[email protected]>
Cc: Andrea Righi <[email protected]>
Cc: Changwoo Min <[email protected]>
Cc: Daniel Hodges <[email protected]>
Cc: Dan Schatzberg <[email protected]>
|
|
Some test scripts are missing executable permissions. It causes warnings
that make the test output unnecessarily verbose. Add executable
permissions.
Link: https://lkml.kernel.org/r/[email protected]
Signed-off-by: SeongJae Park <[email protected]>
Cc: Brendan Higgins <[email protected]>
Cc: David Gow <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
|