| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Let's say a socket send()s "hello" with MSG_OOB and "world" without flags,
>>> from socket import *
>>> c1, c2 = socketpair(AF_UNIX)
>>> c1.send(b'hello', MSG_OOB)
5
>>> c1.send(b'world')
5
and its peer recv()s "hell" and "o".
>>> c2.recv(10)
b'hell'
>>> c2.recv(1, MSG_OOB)
b'o'
Now the consumed OOB skb stays at the head of recvq to return a correct
value for ioctl(SIOCATMARK), which is broken now and fixed by a later
patch.
Then, if peer issues recv() with MSG_DONTWAIT, manage_oob() returns NULL,
so recv() ends up with -EAGAIN.
>>> c2.setblocking(False) # This causes -EAGAIN even with available data
>>> c2.recv(5)
Traceback (most recent call last):
File "<stdin>", line 1, in <module>
BlockingIOError: [Errno 11] Resource temporarily unavailable
However, next recv() will return the following available data, "world".
>>> c2.recv(5)
b'world'
When the consumed OOB skb is at the head of the queue, we need to fetch
the next skb to fix the weird behaviour.
Note that the issue does not happen without MSG_DONTWAIT because we can
retry after manage_oob().
This patch also adds a test case that covers the issue.
Without fix:
# RUN msg_oob.no_peek.ex_oob_break ...
# msg_oob.c:134:ex_oob_break:AF_UNIX :Resource temporarily unavailable
# msg_oob.c:135:ex_oob_break:Expected:ld
# msg_oob.c:137:ex_oob_break:Expected ret[0] (-1) == expected_len (2)
# ex_oob_break: Test terminated by assertion
# FAIL msg_oob.no_peek.ex_oob_break
not ok 8 msg_oob.no_peek.ex_oob_break
With fix:
# RUN msg_oob.no_peek.ex_oob_break ...
# OK msg_oob.no_peek.ex_oob_break
ok 8 msg_oob.no_peek.ex_oob_break
Fixes: 314001f0bf92 ("af_unix: Add OOB support")
Signed-off-by: Kuniyuki Iwashima <[email protected]>
Signed-off-by: Paolo Abeni <[email protected]>
|
|
After consuming OOB data, recv() reading the preceding data must break at
the OOB skb regardless of MSG_PEEK.
Currently, MSG_PEEK does not stop recv() for AF_UNIX, and the behaviour is
not compliant with TCP.
>>> from socket import *
>>> c1, c2 = socketpair(AF_UNIX)
>>> c1.send(b'hello', MSG_OOB)
5
>>> c1.send(b'world')
5
>>> c2.recv(1, MSG_OOB)
b'o'
>>> c2.recv(9, MSG_PEEK) # This should return b'hell'
b'hellworld' # even with enough buffer.
Let's fix it by returning NULL for consumed skb and unlinking it only if
MSG_PEEK is not specified.
This patch also adds test cases that add recv(MSG_PEEK) before each recv().
Without fix:
# RUN msg_oob.peek.oob_ahead_break ...
# msg_oob.c:134:oob_ahead_break:AF_UNIX :hellworld
# msg_oob.c:135:oob_ahead_break:Expected:hell
# msg_oob.c:137:oob_ahead_break:Expected ret[0] (9) == expected_len (4)
# oob_ahead_break: Test terminated by assertion
# FAIL msg_oob.peek.oob_ahead_break
not ok 13 msg_oob.peek.oob_ahead_break
With fix:
# RUN msg_oob.peek.oob_ahead_break ...
# OK msg_oob.peek.oob_ahead_break
ok 13 msg_oob.peek.oob_ahead_break
Fixes: 314001f0bf92 ("af_unix: Add OOB support")
Signed-off-by: Kuniyuki Iwashima <[email protected]>
Signed-off-by: Paolo Abeni <[email protected]>
|
|
AF_UNIX's MSG_OOB functionality lacked thorough testing, and we found
some bizarre behaviour.
The new selftest validates every MSG_OOB operation against TCP as a
reference implementation.
This patch adds only a few tests with basic send() and recv() that
do not fail.
The following patches will add more test cases for SO_OOBINLINE, SIGURG,
EPOLLPRI, and SIOCATMARK.
Signed-off-by: Kuniyuki Iwashima <[email protected]>
Signed-off-by: Paolo Abeni <[email protected]>
|
|
test_unix_oob.c does not fully cover AF_UNIX's MSG_OOB functionality,
thus there are discrepancies between TCP behaviour.
Also, the test uses fork() to create message producer, and it's not
easy to understand and add more test cases.
Let's remove test_unix_oob.c and rewrite a new test.
Signed-off-by: Kuniyuki Iwashima <[email protected]>
Signed-off-by: Paolo Abeni <[email protected]>
|
|
Add tests focusing on indirection table configuration and
creating extra RSS contexts in drivers which support it.
$ export NETIF=eth0 REMOTE_...
$ ./drivers/net/hw/rss_ctx.py
KTAP version 1
1..8
ok 1 rss_ctx.test_rss_key_indir
ok 2 rss_ctx.test_rss_context
ok 3 rss_ctx.test_rss_context4
# Increasing queue count 44 -> 66
# Failed to create context 32, trying to test what we got
ok 4 rss_ctx.test_rss_context32 # SKIP Tested only 31 contexts, wanted 32
ok 5 rss_ctx.test_rss_context_overlap
ok 6 rss_ctx.test_rss_context_overlap2
# .. sprays traffic like a headless chicken ..
not ok 7 rss_ctx.test_rss_context_out_of_order
ok 8 rss_ctx.test_rss_context4_create_with_cfg
# Totals: pass:6 fail:1 xfail:0 xpass:0 skip:1 error:0
Note that rss_ctx.test_rss_context_out_of_order fails with the device
I tested with, but it seems to be a device / driver bug.
Reviewed-by: Petr Machata <[email protected]>
Reviewed-by: Willem de Bruijn <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
Teach the load generator how to wait for at least given number
of packets to be received. This will be useful for filtering
where we'll want to send a non-trivial number of packets and
make sure they landed in right queues.
Reviewed-by: Breno Leitao <[email protected]>
Reviewed-by: Petr Machata <[email protected]>
Reviewed-by: Willem de Bruijn <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
Some devices DMA stats to the host periodically. Add a helper
which can wait for that to happen, based on frequency reported
by the driver in ethtool.
Reviewed-by: Petr Machata <[email protected]>
Reviewed-by: Willem de Bruijn <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
We use random ports for communication. As Willem predicted
this leads to occasional failures. Try to check if port is
already in use by opening a socket and binding to that port.
Reviewed-by: Przemek Kitszel <[email protected]>
Reviewed-by: Petr Machata <[email protected]>
Reviewed-by: Willem de Bruijn <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
ARRAY_SIZE is used on multiple places, move its definition in
bpf_misc.h header.
Signed-off-by: Jiri Olsa <[email protected]>
Signed-off-by: Andrii Nakryiko <[email protected]>
Reviewed-by: Alan Maguire <[email protected]>
Link: https://lore.kernel.org/bpf/[email protected]
|
|
When building with clang for ARCH=i386, the following errors are
observed:
CC kernel/bpf/btf_relocate.o
./tools/lib/bpf/btf_relocate.c:206:23: error: implicit truncation from 'int' to a one-bit wide bit-field changes value from 1 to -1 [-Werror,-Wsingle-bit-bitfield-constant-conversion]
206 | info[id].needs_size = true;
| ^ ~
./tools/lib/bpf/btf_relocate.c:256:25: error: implicit truncation from 'int' to a one-bit wide bit-field changes value from 1 to -1 [-Werror,-Wsingle-bit-bitfield-constant-conversion]
256 | base_info.needs_size = true;
| ^ ~
2 errors generated.
The problem is we use 1-bit, 31-bit bitfields in a signed int.
Changing to
bool needs_size: 1;
unsigned int size:31;
...resolves the error and pahole reports that 4 bytes are used
for the underlying representation:
$ pahole btf_name_info tools/lib/bpf/btf_relocate.o
struct btf_name_info {
const char * name; /* 0 8 */
unsigned int needs_size:1; /* 8: 0 4 */
unsigned int size:31; /* 8: 1 4 */
__u32 id; /* 12 4 */
/* size: 16, cachelines: 1, members: 4 */
/* last cacheline: 16 bytes */
};
Signed-off-by: Alan Maguire <[email protected]>
Signed-off-by: Andrii Nakryiko <[email protected]>
Link: https://lore.kernel.org/bpf/[email protected]
|
|
Guard close() with extra link_fd[i] > 0 and fexit_fd[i] > 0
check to prevent close(-1).
Signed-off-by: Ma Ke <[email protected]>
Signed-off-by: Andrii Nakryiko <[email protected]>
Link: https://lore.kernel.org/bpf/[email protected]
|
|
and reg->type check
Add new negative selftests which are intended to cover the
out-of-bounds memory access that could be performed on a
CONST_PTR_TO_DYNPTR within functions taking a ARG_PTR_TO_DYNPTR |
MEM_RDONLY as an argument, and acceptance of invalid register types
i.e. PTR_TO_BTF_ID within functions taking a ARG_PTR_TO_DYNPTR |
MEM_RDONLY.
Reported-by: Kumar Kartikeya Dwivedi <[email protected]>
Acked-by: Kumar Kartikeya Dwivedi <[email protected]>
Acked-by: Eduard Zingerman <[email protected]>
Signed-off-by: Matt Bobrowski <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Alexei Starovoitov <[email protected]>
|
|
The non-contiguous CBM test fails on AMD with:
Starting L3_NONCONT_CAT test ...
Mounting resctrl to "/sys/fs/resctrl"
CPUID output doesn't match 'sparse_masks' file content!
not ok 5 L3_NONCONT_CAT: test
AMD always supports non-contiguous CBM but does not report it via CPUID.
Fix the non-contiguous CBM test to use CPUID to discover non-contiguous
CBM support only on Intel.
Fixes: ae638551ab64 ("selftests/resctrl: Add non-contiguous CBMs CAT test")
Signed-off-by: Babu Moger <[email protected]>
Reviewed-by: Reinette Chatre <[email protected]>
Reviewed-by: Ilpo Järvinen <[email protected]>
Signed-off-by: Shuah Khan <[email protected]>
|
|
Since interleave capability is not verified, if the interleave
capability of a target does not match the region need, committing decoder
should have failed at the device end.
In order to checkout this error as quickly as possible, driver needs
to check the interleave capability of target during attaching it to
region.
Per CXL specification r3.1(8.2.4.20.1 CXL HDM Decoder Capability Register),
bits 11 and 12 indicate the capability to establish interleaving in 3, 6,
12 and 16 ways. If these bits are not set, the target cannot be attached to
a region utilizing such interleave ways.
Additionally, bits 8 and 9 represent the capability of the bits used for
interleaving in the address, Linux tracks this in the cxl_port
interleave_mask.
Per CXL specification r3.1(8.2.4.20.13 Decoder Protection):
eIW means encoded Interleave Ways.
eIG means encoded Interleave Granularity.
in HPA:
if eIW is 0 or 8 (interleave ways: 1, 3), all the bits of HPA are used,
the interleave bits are none, the following check is ignored.
if eIW is less than 8 (interleave ways: 2, 4, 8, 16), the interleave bits
start at bit position eIG + 8 and end at eIG + eIW + 8 - 1.
if eIW is greater than 8 (interleave ways: 6, 12), the interleave bits
start at bit position eIG + 8 and end at eIG + eIW - 1.
if the interleave mask is insufficient to cover the required interleave
bits, the target cannot be attached to the region.
Fixes: 384e624bb211 ("cxl/region: Attach endpoint decoders")
Signed-off-by: Yao Xingtao <[email protected]>
Reviewed-by: Dan Williams <[email protected]>
Reviewed-by: Jonathan Cameron <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Dave Jiang <[email protected]>
|
|
It seems that there is no definition for config IP_GRE, and it is not a
dependency of other configs, so remove it.
linux$ find -name Kconfig | xargs grep "IP_GRE"
<-- nothing
There is a IPV6_GRE config defined in net/ipv6/Kconfig. It only depends
on NET_IPGRE_DEMUX but not IP_GRE.
Signed-off-by: Yujie Liu <[email protected]>
Acked-by: Jakub Kicinski <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
After calling fork() in test_prctl_fork_exec(), the global variable
ksm_full_scans_fd is initialized to 0 in the child process upon entering
the main function of ./ksm_functional_tests.
In the function call chain test_child_ksm() -> __mmap_and_merge_range ->
ksm_merge-> ksm_get_full_scans, start_scans = ksm_get_full_scans() will
return an error. Therefore, the value of ksm_full_scans_fd needs to be
initialized before calling test_child_ksm in the child process.
Link: https://lkml.kernel.org/r/[email protected]
Signed-off-by: aigourensheng <[email protected]>
Acked-by: David Hildenbrand <[email protected]>
Cc: Shuah Khan <[email protected]>
Cc: <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
|
|
ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/bpf/bpf
Daniel Borkmann says:
====================
pull-request: bpf 2024-06-24
We've added 12 non-merge commits during the last 10 day(s) which contain
a total of 10 files changed, 412 insertions(+), 16 deletions(-).
The main changes are:
1) Fix a BPF verifier issue validating may_goto with a negative offset,
from Alexei Starovoitov.
2) Fix a BPF verifier validation bug with may_goto combined with jump to
the first instruction, also from Alexei Starovoitov.
3) Fix a bug with overrunning reservations in BPF ring buffer,
from Daniel Borkmann.
4) Fix a bug in BPF verifier due to missing proper var_off setting related
to movsx instruction, from Yonghong Song.
5) Silence unnecessary syzkaller-triggered warning in __xdp_reg_mem_model(),
from Daniil Dulov.
* tag 'for-netdev' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/bpf/bpf:
xdp: Remove WARN() from __xdp_reg_mem_model()
selftests/bpf: Add tests for may_goto with negative offset.
bpf: Fix may_goto with negative offset.
selftests/bpf: Add more ring buffer test coverage
bpf: Fix overrunning reservations in ringbuf
selftests/bpf: Tests with may_goto and jumps to the 1st insn
bpf: Fix the corner case with may_goto and jump to the 1st insn.
bpf: Update BPF LSM maintainer list
bpf: Fix remap of arena.
selftests/bpf: Add a few tests to cover
bpf: Add missed var_off setting in coerce_subreg_to_size_sx()
bpf: Add missed var_off setting in set_sext32_default_val()
====================
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
When upgrading to libbpf 1.3 we noticed a big performance hit while
loading programs using CORE on non base-BTF symbols. This was tracked
down to the new BTF sanity check logic. The issue is the base BTF
definitions are checked first for the base BTF and then again for every
module BTF.
Loading 5 dummy programs (using libbpf-rs) that are using CORE on a
non-base BTF symbol on my system:
- Before this fix: 3s.
- With this fix: 0.1s.
Fix this by only checking the types starting at the BTF start id. This
should ensure the base BTF is still checked as expected but only once
(btf->start_id == 1 when creating the base BTF), and then only
additional types are checked for each module BTF.
Fixes: 3903802bb99a ("libbpf: Add basic BTF sanity validation")
Signed-off-by: Antoine Tenart <[email protected]>
Signed-off-by: Andrii Nakryiko <[email protected]>
Reviewed-by: Alan Maguire <[email protected]>
Link: https://lore.kernel.org/bpf/[email protected]
|
|
Add few tests with may_goto and negative offset.
Signed-off-by: Alexei Starovoitov <[email protected]>
Signed-off-by: Andrii Nakryiko <[email protected]>
Signed-off-by: Daniel Borkmann <[email protected]>
Link: https://lore.kernel.org/bpf/[email protected]
|
|
Add test coverage for reservations beyond the ring buffer size in order
to validate that bpf_ringbuf_reserve() rejects the request with NULL, all
other ring buffer tests keep passing as well:
# ./vmtest.sh -- ./test_progs -t ringbuf
[...]
./test_progs -t ringbuf
[ 1.165434] bpf_testmod: loading out-of-tree module taints kernel.
[ 1.165825] bpf_testmod: module verification failed: signature and/or required key missing - tainting kernel
[ 1.284001] tsc: Refined TSC clocksource calibration: 3407.982 MHz
[ 1.286871] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x311fc34e357, max_idle_ns: 440795379773 ns
[ 1.289555] clocksource: Switched to clocksource tsc
#274/1 ringbuf/ringbuf:OK
#274/2 ringbuf/ringbuf_n:OK
#274/3 ringbuf/ringbuf_map_key:OK
#274/4 ringbuf/ringbuf_write:OK
#274 ringbuf:OK
#275 ringbuf_multi:OK
[...]
Signed-off-by: Daniel Borkmann <[email protected]>
Signed-off-by: Andrii Nakryiko <[email protected]>
[ Test fixups for getting BPF CI back to work ]
Signed-off-by: Daniel Borkmann <[email protected]>
Link: https://lore.kernel.org/bpf/[email protected]
|
|
Pull kvm fixes from Paolo Bonzini:
"ARM:
- Fix dangling references to a redistributor region if the vgic was
prematurely destroyed.
- Properly mark FFA buffers as released, ensuring that both parties
can make forward progress.
x86:
- Allow getting/setting MSRs for SEV-ES guests, if they're using the
pre-6.9 KVM_SEV_ES_INIT API.
- Always sync pending posted interrupts to the IRR prior to IOAPIC
route updates, so that EOIs are intercepted properly if the old
routing table requested that.
Generic:
- Avoid __fls(0)
- Fix reference leak on hwpoisoned page
- Fix a race in kvm_vcpu_on_spin() by ensuring loads and stores are
atomic.
- Fix bug in __kvm_handle_hva_range() where KVM calls a function
pointer that was intended to be a marker only (nothing bad happens
but kind of a mine and also technically undefined behavior)
- Do not bother accounting allocations that are small and freed
before getting back to userspace.
Selftests:
- Fix compilation for RISC-V.
- Fix a "shift too big" goof in the KVM_SEV_INIT2 selftest.
- Compute the max mappable gfn for KVM selftests on x86 using
GuestMaxPhyAddr from KVM's supported CPUID (if it's available)"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
KVM: SEV-ES: Fix svm_get_msr()/svm_set_msr() for KVM_SEV_ES_INIT guests
KVM: Discard zero mask with function kvm_dirty_ring_reset
virt: guest_memfd: fix reference leak on hwpoisoned page
kvm: do not account temporary allocations to kmem
MAINTAINERS: Drop Wanpeng Li as a Reviewer for KVM Paravirt support
KVM: x86: Always sync PIR to IRR prior to scanning I/O APIC routes
KVM: Stop processing *all* memslots when "null" mmu_notifier handler is found
KVM: arm64: FFA: Release hyp rx buffer
KVM: selftests: Fix RISC-V compilation
KVM: arm64: Disassociate vcpus from redistributor region on teardown
KVM: Fix a data race on last_boosted_vcpu in kvm_vcpu_on_spin()
KVM: selftests: x86: Prioritize getting max_gfn from GuestPhysBits
KVM: selftests: Fix shift of 32 bit unsigned int more than 32 bits
|
|
add simple kfuncs to create/destroy a context type to bpf_testmod,
register them and add a kfunc_call test to use them. This provides
test coverage for registration of dtor kfuncs from modules.
By transferring the context pointer to a map value as a __kptr
we also trigger the map-based dtor cleanup logic, improving test
coverage.
Suggested-by: Eduard Zingerman <[email protected]>
Signed-off-by: Alan Maguire <[email protected]>
Signed-off-by: Andrii Nakryiko <[email protected]>
Link: https://lore.kernel.org/bpf/[email protected]
|
|
Share relocation implementation with the kernel. As part of this,
we also need the type/string iteration functions so also share
btf_iter.c file. Relocation code in kernel and userspace is identical
save for the impementation of the reparenting of split BTF to the
relocated base BTF and retrieval of the BTF header from "struct btf";
these small functions need separate user-space and kernel implementations
for the separate "struct btf"s they operate upon.
One other wrinkle on the kernel side is we have to map .BTF.ids in
modules as they were generated with the type ids used at BTF encoding
time. btf_relocate() optionally returns an array mapping from old BTF
ids to relocated ids, so we use that to fix up these references where
needed for kfuncs.
Signed-off-by: Alan Maguire <[email protected]>
Signed-off-by: Andrii Nakryiko <[email protected]>
Acked-by: Eduard Zingerman <[email protected]>
Link: https://lore.kernel.org/bpf/[email protected]
|
|
This will allow it to be shared with the kernel. No functional change.
Suggested-by: Andrii Nakryiko <[email protected]>
Signed-off-by: Alan Maguire <[email protected]>
Signed-off-by: Andrii Nakryiko <[email protected]>
Link: https://lore.kernel.org/bpf/[email protected]
|
|
Use less verbose names in BTF relocation code and fix off-by-one error
and typo in btf_relocate.c. Simplify loop over matching distilled
types, moving from assigning a _next value in loop body to moving
match check conditions into the guard.
Suggested-by: Andrii Nakryiko <[email protected]>
Signed-off-by: Alan Maguire <[email protected]>
Signed-off-by: Andrii Nakryiko <[email protected]>
Acked-by: Eduard Zingerman <[email protected]>
Link: https://lore.kernel.org/bpf/[email protected]
|
|
Adding selftest to verify that struct_ops maps are auto attached by
bpf skeleton's `*__attach` function.
Signed-off-by: Mykyta Yatsenko <[email protected]>
Signed-off-by: Andrii Nakryiko <[email protected]>
Link: https://lore.kernel.org/bpf/[email protected]
|
|
This patch changes a few tests to make use of regular expressions.
Fixed tests otherwise fail when compiled with GCC.
Signed-off-by: Cupertino Miranda <[email protected]>
Signed-off-by: Andrii Nakryiko <[email protected]>
Acked-by: Eduard Zingerman <[email protected]>
Link: https://lore.kernel.org/bpf/[email protected]
|
|
Add support for __regex and __regex_unpriv macros to check the test
execution output against a regular expression. This is similar to __msg
and __msg_unpriv, however those expect do substring matching.
Signed-off-by: Cupertino Miranda <[email protected]>
Signed-off-by: Andrii Nakryiko <[email protected]>
Acked-by: Eduard Zingerman <[email protected]>
Link: https://lore.kernel.org/bpf/[email protected]
|
|
Add few tests with may_goto and jumps to the 1st insn.
Signed-off-by: Alexei Starovoitov <[email protected]>
Signed-off-by: Daniel Borkmann <[email protected]>
Acked-by: Eduard Zingerman <[email protected]>
Link: https://lore.kernel.org/bpf/[email protected]
|
|
I encountered an issue when building the test_progs from the repository [1]:
$ pwd
/work/Qemu/x86_64/linux-6.10-rc2/tools/testing/selftests/bpf/
$ make test_progs V=1
[...]
./tools/sbin/bpftool gen object ./ip_check_defrag.bpf.linked2.o ./ip_check_defrag.bpf.linked1.o
libbpf: failed to find symbol for variable 'bpf_dynptr_slice' in section '.ksyms'
Error: failed to link './ip_check_defrag.bpf.linked1.o': No such file or directory (2)
[...]
Upon investigation, I discovered that the btf_types referenced in the '.ksyms'
section had a kind of BTF_KIND_FUNC instead of BTF_KIND_VAR:
$ bpftool btf dump file ./ip_check_defrag.bpf.linked1.o
[...]
[2] DATASEC '.ksyms' size=0 vlen=2
type_id=16 offset=0 size=0 (FUNC 'bpf_dynptr_from_skb')
type_id=17 offset=0 size=0 (FUNC 'bpf_dynptr_slice')
[...]
[16] FUNC 'bpf_dynptr_from_skb' type_id=82 linkage=extern
[17] FUNC 'bpf_dynptr_slice' type_id=85 linkage=extern
[...]
For a detailed analysis, please refer to [2]. We can add a kind checking to
fix the issue.
[1] https://github.com/eddyz87/bpf/tree/binsort-btf-dedup
[2] https://lore.kernel.org/all/[email protected]/
Fixes: 8fd27bf69b86 ("libbpf: Add BPF static linker BTF and BTF.ext support")
Signed-off-by: Donglin Peng <[email protected]>
Signed-off-by: Daniel Borkmann <[email protected]>
Reviewed-by: Alan Maguire <[email protected]>
Acked-by: Eduard Zingerman <[email protected]>
Link: https://lore.kernel.org/bpf/[email protected]
|
|
New versions of bpftool now emit additional link placeholders for BPF
maps (struct_ops maps are the only maps right now that support
attachment), and set up BPF skeleton in such a way that libbpf will
auto-attach BPF maps automatically, assumming libbpf is recent enough
(v1.5+). Old libbpf will do nothing with those links and won't attempt
to auto-attach maps. This allows user code to handle both pre-v1.5 and
v1.5+ versions of libbpf at runtime, if necessary.
But if users don't have (or don't want to) control bpftool version that
generates skeleton, then they can't just assume that skeleton will have
link placeholders. To make this detection possible and easy, let's add
the following to generated skeleton header file:
#define BPF_SKEL_SUPPORTS_MAP_AUTO_ATTACH 1
This can be used during compilation time to guard code that accesses
skel->links.<map> slots.
Note, if auto-attachment is undesirable, libbpf allows to disable this
through bpf_map__set_autoattach(map, false). This is necessary only on
libbpf v1.5+, older libbpf doesn't support map auto-attach anyways.
Libbpf version can be detected at compilation time using
LIBBPF_MAJOR_VERSION and LIBBPF_MINOR_VERSION macros, or at runtime with
libbpf_major_version() and libbpf_minor_version() APIs.
Signed-off-by: Andrii Nakryiko <[email protected]>
Signed-off-by: Daniel Borkmann <[email protected]>
Acked-by: Quentin Monnet <[email protected]>
Link: https://lore.kernel.org/bpf/[email protected]
|
|
This reverts [1] and changes return value for bpf_session_cookie
in bpf selftests. Having long * might lead to problems on 32-bit
architectures.
Fixes: 2b8dd87332cd ("bpf: Make bpf_session_cookie() kfunc return long *")
Suggested-by: Andrii Nakryiko <[email protected]>
Signed-off-by: Jiri Olsa <[email protected]>
Signed-off-by: Daniel Borkmann <[email protected]>
Acked-by: Andrii Nakryiko <[email protected]>
Link: https://lore.kernel.org/bpf/[email protected]
|
|
into HEAD
KVM/riscv fixes for 6.10, take #2
- Fix compilation for KVM selftests
|
|
amt.sh is written in bash, not sh.
So, shebang should be bash.
Signed-off-by: Taehee Yoo <[email protected]>
Acked-by: Muhammad Usama Anjum <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
diag_uid selftest failed on NIPA where the received nlmsg_type is
NLMSG_ERROR [0] because CONFIG_UNIX_DIAG is not set [1] by default
and sock_diag_lock_handler() failed to load the module.
# # Starting 2 tests from 2 test cases.
# # RUN diag_uid.uid.1 ...
# # diag_uid.c:159:1:Expected nlh->nlmsg_type (2) == SOCK_DIAG_BY_FAMILY (20)
# # 1: Test terminated by assertion
# # FAIL diag_uid.uid.1
# not ok 1 diag_uid.uid.1
Let's add all AF_UNIX Kconfig to the config file under af_unix dir
so that NIPA consumes it.
Fixes: ac011361bd4f ("af_unix: Add test for sock_diag and UDIAG_SHOW_UID.")
Link: https://netdev-3.bots.linux.dev/vmksft-net/results/644841/104-diag-uid/stdout [0]
Link: https://netdev-3.bots.linux.dev/vmksft-net/results/644841/config [1]
Reported-by: Jakub Kicinski <[email protected]>
Closes: https://lore.kernel.org/netdev/[email protected]/
Signed-off-by: Kuniyuki Iwashima <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
Since start_server_str() is added now, it can be used in script
test_tcp_check_syncookie_user.c instead of start_server_addr() to
simplify the code.
Acked-by: Eduard Zingerman <[email protected]>
Signed-off-by: Geliang Tang <[email protected]>
Link: https://lore.kernel.org/r/5d2f442261d37cff16c1f1b21a2b188508ab67fa.1718932493.git.tanggeliang@kylinos.cn
Signed-off-by: Alexei Starovoitov <[email protected]>
|
|
Since start_server_str() is added now, it can be used in mptcp.c in
start_mptcp_server() instead of using helpers make_sockaddr() and
start_server_addr() to simplify the code.
Acked-by: Eduard Zingerman <[email protected]>
Signed-off-by: Geliang Tang <[email protected]>
Link: https://lore.kernel.org/r/16fb3e2cd60b64b5470b0e69f1aa233feaf2717c.1718932493.git.tanggeliang@kylinos.cn
Signed-off-by: Alexei Starovoitov <[email protected]>
|
|
In test_bpf_ip_check_defrag_ok(), the new helper client_socket() can be
used to replace connect_to_fd_opts() with "noconnect" opts, and the strcut
member "noconnect" of network_helper_opts can be dropped now, always
connect to server in connect_to_fd_opts().
Acked-by: Eduard Zingerman <[email protected]>
Signed-off-by: Geliang Tang <[email protected]>
Link: https://lore.kernel.org/r/f45760becce51986e4e08283c7df0f933eb0da14.1718932493.git.tanggeliang@kylinos.cn
Signed-off-by: Alexei Starovoitov <[email protected]>
|
|
This patch extracts a new helper client_socket() from connect_to_fd_opts()
to create the client socket, but don't connect to the server. Then
connect_to_fd_opts() can be implemented using client_socket() and
connect_fd_to_addr(). This helper can be used in connect_to_addr() too,
and make "noconnect" opts useless.
Acked-by: Eduard Zingerman <[email protected]>
Signed-off-by: Geliang Tang <[email protected]>
Link: https://lore.kernel.org/r/4169c554e1cee79223feea49a1adc459d55e1ffe.1718932493.git.tanggeliang@kylinos.cn
Signed-off-by: Alexei Starovoitov <[email protected]>
|
|
This patch moves "post_socket_cb" and "noconnect" into connect_to_addr(),
then connect_to_fd_opts() can be implemented by getsockname() and
connect_to_addr(). This change makes connect_to_* interfaces more unified.
Acked-by: Eduard Zingerman <[email protected]>
Signed-off-by: Geliang Tang <[email protected]>
Link: https://lore.kernel.org/r/4569c30533e14c22fae6c05070aad809720551c1.1718932493.git.tanggeliang@kylinos.cn
Signed-off-by: Alexei Starovoitov <[email protected]>
|
|
The opts.{type, noconnect} is at least a bit non intuitive or unnecessary.
The only use case now is in test_bpf_ip_check_defrag_ok which ends up
bypassing most (or at least some) of the connect_to_fd_opts() logic. It's
much better that test should have its own connect_to_fd_opts() instead.
This patch adds a new "type" parameter for connect_to_fd_opts(), then
opts->type and getsockopt(SO_TYPE) can be replaced by "type" parameter in
it.
In connect_to_fd(), use getsockopt(SO_TYPE) to get "type" value and pass
it to connect_to_fd_opts().
In bpf_tcp_ca.c and cgroup_v1v2.c, "SOCK_STREAM" types are passed to
connect_to_fd_opts(), and in ip_check_defrag.c, different types "SOCK_RAW"
and "SOCK_DGRAM" are passed to it.
With these changes, the strcut member "type" of network_helper_opts can be
dropped now.
Acked-by: Eduard Zingerman <[email protected]>
Signed-off-by: Geliang Tang <[email protected]>
Link: https://lore.kernel.org/r/cfd20b5ad4085c1d1af5e79df3b09013a407199f.1718932493.git.tanggeliang@kylinos.cn
Signed-off-by: Alexei Starovoitov <[email protected]>
|
|
Cross-merge networking fixes after downstream PR.
Conflicts:
drivers/net/ethernet/broadcom/bnxt/bnxt.c
1e7962114c10 ("bnxt_en: Restore PTP tx_avail count in case of skb_pad() error")
165f87691a89 ("bnxt_en: add timestamping statistics support")
No adjacent changes.
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Including fixes from wireless, bpf and netfilter.
Happy summer solstice! The line count is a bit inflated by a selftest
and update to a driver's FW interface header, in reality this is
slightly below average for us. We are expecting one driver fix from
Intel, but there are no big known issues.
Current release - regressions:
- ipv6: bring NLM_DONE out to a separate recv() again
Current release - new code bugs:
- wifi: cfg80211: wext: set ssids=NULL for passive scans via old wext API
Previous releases - regressions:
- wifi: mac80211: fix monitor channel setting with chanctx emulation
(probably most awaited of the fixes in this PR, tracked by Thorsten)
- usb: ax88179_178a: bring back reset on init, if PHY is disconnected
- bpf: fix UML x86_64 compile failure with BPF
- bpf: avoid splat in pskb_pull_reason(), sanity check added can be hit
with malicious BPF
- eth: mvpp2: use slab_build_skb() for packets in slab, driver was
missed during API refactoring
- wifi: iwlwifi: add missing unlock of mvm mutex
Previous releases - always broken:
- ipv6: add a number of missing null-checks for in6_dev_get(), in case
IPv6 disabling races with the datapath
- bpf: fix reg_set_min_max corruption of fake_reg
- sched: act_ct: add netns as part of the key of tcf_ct_flow_table"
* tag 'net-6.10-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (63 commits)
net: usb: rtl8150 fix unintiatilzed variables in rtl8150_get_link_ksettings
selftests: virtio_net: add forgotten config options
bnxt_en: Restore PTP tx_avail count in case of skb_pad() error
bnxt_en: Set TSO max segs on devices with limits
bnxt_en: Update firmware interface to 1.10.3.44
net: stmmac: Assign configured channel value to EXTTS event
net: do not leave a dangling sk pointer, when socket creation fails
net/tcp_ao: Don't leak ao_info on error-path
ice: Fix VSI list rule with ICE_SW_LKUP_LAST type
ipv6: bring NLM_DONE out to a separate recv() again
selftests: add selftest for the SRv6 End.DX6 behavior with netfilter
selftests: add selftest for the SRv6 End.DX4 behavior with netfilter
netfilter: move the sysctl nf_hooks_lwtunnel into the netfilter core
seg6: fix parameter passing when calling NF_HOOK() in End.DX4 and End.DX6 behaviors
netfilter: ipset: Fix suspicious rcu_dereference_protected()
selftests: openvswitch: Set value to nla flags.
octeontx2-pf: Fix linking objects into multiple modules
octeontx2-pf: Add error handling to VLAN unoffload handling
virtio_net: fixing XDP for fully checksummed packets handling
virtio_net: checksum offloading handling fix
...
|
|
There is a type 'enum operation_mode_e' contains the display modes of
the 'monitor' subcommand. This type isn't used though, instead the
variable 'mode' is of a simple 'int' type.
Change 'mode' variable type from 'int' to 'enum operation_mode_e' in
order to improve compiler type checking.
Built and tested this with different monitor cmdline params. Everything
works as expected, that is nothing changed and no regressions encountered.
Signed-off-by: Roman Storozhenko <[email protected]>
Signed-off-by: Shuah Khan <[email protected]>
|
|
Remove not supported '-v' parameter from the cpupower's 'monitor'
command description.
There is a '-v' parameter described in cpupower's 'monitor' command man
page. It isn't supported at the moment, and perhaps has never been
supported. When I run the monitor with this parameter I get the
following:
$ sudo LD_LIBRARY_PATH=lib64/ bin/cpupower monitor -v
monitor: invalid option -- 'v'
invalid or unknown argument
$ sudo LD_LIBRARY_PATH=lib64/ bin/cpupower monitor -V
monitor: invalid option -- 'V'
invalid or unknown argument
Signed-off-by: Roman Storozhenko <[email protected]>
Signed-off-by: Shuah Khan <[email protected]>
|
|
One may use tools/testing/selftests/drivers/net/virtio_net/config
for example for vng build command like this one:
$ vng -v -b -f tools/testing/selftests/drivers/net/virtio_net/config
In that case, the needed kernel config options are not turned on.
Add the missed kernel config options.
Reported-by: Jakub Kicinski <[email protected]>
Closes: https://lore.kernel.org/netdev/[email protected]/
Reported-by: Matthieu Baerts <[email protected]>
Closes: https://lore.kernel.org/netdev/[email protected]/
Fixes: ccfaed04db5e ("selftests: virtio_net: add initial tests")
Signed-off-by: Jiri Pirko <[email protected]>
Reviewed-by: Xuan Zhuo <[email protected]>
Acked-by: Michael S. Tsirkin <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
The p_align values in PT_LOAD were ignored for static PIE executables
(i.e. ET_DYN without PT_INTERP). This is because there is no way to
request a non-fixed mmap region with a specific alignment. ET_DYN with
PT_INTERP uses a separate base address (ELF_ET_DYN_BASE) and binfmt_elf
performs the ASLR itself, which means it can also apply alignment. For
the mmap region, the address selection happens deep within the vm_mmap()
implementation (when the requested address is 0).
The earlier attempt to implement this:
commit 9630f0d60fec ("fs/binfmt_elf: use PT_LOAD p_align values for static PIE")
commit 925346c129da ("fs/binfmt_elf: fix PT_LOAD p_align values for loaders")
did not take into account the different base address origins, and were
eventually reverted:
aeb7923733d1 ("revert "fs/binfmt_elf: use PT_LOAD p_align values for static PIE"")
In order to get the correct alignment from an mmap base, binfmt_elf must
perform a 0-address load first, then tear down the mapping and perform
alignment on the resulting address. Since this is slightly more overhead,
only do this when it is needed (i.e. the alignment is not the default
ELF alignment). This does, however, have the benefit of being able to
use MAP_FIXED_NOREPLACE, to avoid potential collisions.
With this fixed, enable the static PIE self tests again.
Reported-by: H.J. Lu <[email protected]>
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=215275
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Kees Cook <[email protected]>
|
|
After commit 4d1cd3b2c5c1 ("tools/testing/selftests/exec: fix link
error"), the load address alignment tests tried to build statically.
This was silently ignored in some cases. However, after attempting to
further fix the build by switching to "-static-pie", the test started
failing. This appears to be due to non-PT_INTERP ET_DYN execs ("static
PIE") not doing alignment correctly, which remains unfixed[1]. See commit
aeb7923733d1 ("revert "fs/binfmt_elf: use PT_LOAD p_align values for
static PIE"") for more details.
Provide rules to build both static and non-static PIE binaries, improve
debug reporting, and perform several test steps instead of a single
all-or-nothing test. However, do not actually enable static-pie tests;
alignment specification is only supported for ET_DYN with PT_INTERP
("regular PIE").
Link: https://bugzilla.kernel.org/show_bug.cgi?id=215275 [1]
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Kees Cook <[email protected]>
|
|
Unlike the list of isolated CPUs, it is not easy to programamatically
determine what sched domains are being created by the scheduler just
by examinng the data in various kernfs filesystems. The easiest way
to get this information is by enabling /sys/kernel/debug/sched/verbose
file to make those information displayed in the console. This is also
what the test_cpuset_prs.sh script is doing when the -v flag is given.
It is rather hard to fetch the data from the console and compare it to
the expected result. An easier way is to dump the expected sched-domain
information out to the console so that they can be visually compared
with the actual sched domain data. However, this have to be done manually
by visual inspection and so will only be done once in a while.
Moreover the preceding cpuset commits also change the cpuset behavior
requiring corresponding chanages in some test cases as well as new test
cases to test the newly added functionality.
Signed-off-by: Waiman Long <[email protected]>
Signed-off-by: Tejun Heo <[email protected]>
|
|
The test robot reported two different problems when running the
test_cpuset_prs.sh test.
# ./test_cpuset_prs.sh: line 106: echo: write error: Input/output error
# :
# Effective cpus changed to 0-1,4-7 after test 4!
The write error is caused by writing to /dev/console. It looks like
some systems may not have /dev/console configured or in a writeable
state. Fix this by checking the existence of /dev/console before
attempting to write it.
After the completion of each test run, the script will check if the
cpuset state is reset back to the original state. That usually takes a
while to happen. The test script inserts some artificial delay to make
sure that the reset has completed. The current setting is about 80ms.
That may not be enough in some cases especially if the test system is
slow. Double it to 160ms to minimize the chance of this type of failure.
Reported-by: kernel test robot <[email protected]>
Closes: https://lore.kernel.org/oe-lkp/[email protected]
Signed-off-by: Waiman Long <[email protected]>
Signed-off-by: Tejun Heo <[email protected]>
|