| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
The validate_branch() function should never return a negative value.
Errors are treated as warnings so that even if something goes wrong,
objtool does its best to generate ORC data for the rest of the file.
Signed-off-by: Josh Poimboeuf <[email protected]>
Cc: Andy Lutomirski <[email protected]>
Cc: Arnd Bergmann <[email protected]>
Cc: Borislav Petkov <[email protected]>
Cc: Brian Gerst <[email protected]>
Cc: Denys Vlasenko <[email protected]>
Cc: H. Peter Anvin <[email protected]>
Cc: Linus Torvalds <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Thomas Gleixner <[email protected]>
Fixes: baa41469a7b9 ("objtool: Implement stack validation 2.0")
Link: http://lkml.kernel.org/r/d86671cfde823b50477cd2f6f548dfe54871e24d.1502401017.git.jpoimboe@redhat.com
Signed-off-by: Ingo Molnar <[email protected]>
|
|
The firmware API has a feature to enable batching requests for the same fil
e under one worker, so only one lookup is done. This only triggers if we so
happen to schedule two lookups for same file around the same time, or if
release_firmware() has not been called for a successful firmware call. This
can happen for instance if you happen to have multiple devices and one
device driver for certain drivers where the stars line up scheduling
wise.
This adds a new sync and async test trigger. Instead of adding a new
trigger for each new test type we make the tests a bit configurable so that
we could configure the tests in userspace and just kick a test through a
few basic triggers. With this, for instance the two types of sync requests:
o request_firmware() and
o request_firmware_direct()
can be modified with a knob. Likewise the two type of async requests:
o request_firmware_nowait(uevent=true) and
o request_firmware_nowait(uevent=false)
can be configured with another knob. The call request_firmware_into_buf()
has no users... yet.
The old tests are left in place as-is given they serve a few other purposes
which we are currently not interested in also testing yet. This will change
later as we will be able to just consolidate all tests under a few basic
triggers with just one general configuration setup.
We perform two types of tests, one for where the file is present and one
for where the file is not present. All test tests go tested and they now
pass for the following 3 kernel builds possible for the firmware API:
0. Most distro setup:
CONFIG_FW_LOADER_USER_HELPER_FALLBACK=n
CONFIG_FW_LOADER_USER_HELPER=y
1. Android:
CONFIG_FW_LOADER_USER_HELPER_FALLBACK=y
CONFIG_FW_LOADER_USER_HELPER=y
2. Rare build:
CONFIG_FW_LOADER_USER_HELPER_FALLBACK=n
CONFIG_FW_LOADER_USER_HELPER=n
Signed-off-by: Luis R. Rodriguez <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
It has been reported that SIGCHLD will trigger an immediate abort
on sync firmware requests which rely on the sysfs interface for a
trigger. This is unexpected behaviour, this reproduces this issue.
This test case currenty fails.
Reported-by: Martin Fuzzey <[email protected]>
Signed-off-by: Luis R. Rodriguez <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
add a simple script to exercise some rtnetlink call paths, so KASAN,
lockdep etc. can yell at developer before patches are sent upstream.
This can be extended to also cover bond, team, vrf and the like.
Signed-off-by: Florian Westphal <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
Those are funny cases. Make sure they work.
(Something is screwy with signal handling if a selector is 1, 2, or 3.
Anyone who wants to dive into that rabbit hole is welcome to do so.)
Signed-off-by: Andy Lutomirski <[email protected]>
Cc: Borislav Petkov <[email protected]>
Cc: Borislav Petkov <[email protected]>
Cc: Brian Gerst <[email protected]>
Cc: Chang Seok <[email protected]>
Cc: Denys Vlasenko <[email protected]>
Cc: H. Peter Anvin <[email protected]>
Cc: Josh Poimboeuf <[email protected]>
Cc: Linus Torvalds <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Thomas Gleixner <[email protected]>
Cc: [email protected]
Signed-off-by: Ingo Molnar <[email protected]>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux into perf/core
Pull perf/core improvements from Arnaldo Carvalho de Melo:
User visible changes:
- Beautifiers for the 'cmd' arg of several ioctl types, including:
sound, DRM, KVM, vhost virtio and perf_events.
This was done by using scripts that extract the information from
the UAPI headers, generating string tables that are then used in
the 'perf trace' syscall argument ioctl beautifier.
More work needed to further use it, for instance, to use the
_IOC_DIR value where it is used sanely to suppress the third
argument, to set formatters for non-pointer values and ultimately
for using eBPF + pahole-like code to collect + beautify structs in
the third arg.
Using the current scheme of having tools/ copies of kernel headers
we'll make sure tooling stays working when changes are made to the
kernel ABI headers and will be notified when they get changed,
reducing the time for 'perf trace' to support new ABIs and allowing
the tools/perf/ codebase to have the definitions it needs to
build in dozens of distros/versions, as routinely tested using
containers for, at this time, 47 environments. (Arnaldo Carvalho de Melo)
Infrastructure changes:
- Clarify header version warning message (Ingo Molnar)
- Sync kernel ABI headers with tooling headers (Ingo Molnar, Arnaldo Carvalho de Melo)
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
Signed-off-by: Ingo Molnar <[email protected]>
|
|
Signed-off-by: Ingo Molnar <[email protected]>
|
|
Signed-off-by: Ingo Molnar <[email protected]>
|
|
Add test cases to the verifier selftest suite in order to verify that
i) direct packet access, and ii) dynamic map value access is working
with the changes related to the new instructions.
Signed-off-by: Daniel Borkmann <[email protected]>
Acked-by: Alexei Starovoitov <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
Currently, eBPF only understands BPF_JGT (>), BPF_JGE (>=),
BPF_JSGT (s>), BPF_JSGE (s>=) instructions, this means that
particularly *JLT/*JLE counterparts involving immediates need
to be rewritten from e.g. X < [IMM] by swapping arguments into
[IMM] > X, meaning the immediate first is required to be loaded
into a register Y := [IMM], such that then we can compare with
Y > X. Note that the destination operand is always required to
be a register.
This has the downside of having unnecessarily increased register
pressure, meaning complex program would need to spill other
registers temporarily to stack in order to obtain an unused
register for the [IMM]. Loading to registers will thus also
affect state pruning since we need to account for that register
use and potentially those registers that had to be spilled/filled
again. As a consequence slightly more stack space might have
been used due to spilling, and BPF programs are a bit longer
due to extra code involving the register load and potentially
required spill/fills.
Thus, add BPF_JLT (<), BPF_JLE (<=), BPF_JSLT (s<), BPF_JSLE (s<=)
counterparts to the eBPF instruction set. Modifying LLVM to
remove the NegateCC() workaround in a PoC patch at [1] and
allowing it to also emit the new instructions resulted in
cilium's BPF programs that are injected into the fast-path to
have a reduced program length in the range of 2-3% (e.g.
accumulated main and tail call sections from one of the object
file reduced from 4864 to 4729 insns), reduced complexity in
the range of 10-30% (e.g. accumulated sections reduced in one
of the cases from 116432 to 88428 insns), and reduced stack
usage in the range of 1-5% (e.g. accumulated sections from one
of the object files reduced from 824 to 784b).
The modification for LLVM will be incorporated in a backwards
compatible way. Plan is for LLVM to have i) a target specific
option to offer a possibility to explicitly enable the extension
by the user (as we have with -m target specific extensions today
for various CPU insns), and ii) have the kernel checked for
presence of the extensions and enable them transparently when
the user is selecting more aggressive options such as -march=native
in a bpf target context. (Other frontends generating BPF byte
code, e.g. ply can probe the kernel directly for its code
generation.)
[1] https://github.com/borkmann/llvm/tree/bpf-insns
Signed-off-by: Daniel Borkmann <[email protected]>
Acked-by: Alexei Starovoitov <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
The UDP offload conflict is dealt with by simply taking what is
in net-next where we have removed all of the UFO handling code
entirely.
The TCP conflict was a case of local variables in a function
being removed from both net and net-next.
In netvsc we had an assignment right next to where a missing
set of u64 stats sync object inits were added.
Signed-off-by: David S. Miller <[email protected]>
|
|
make -C tools/testing/selftests/futex/ run_tests doesn't run the futex
tests.
Running the tests when `dirname $(OUTPUT)` == $(PWD) doesn't work when
the $(OUTPUT) is $(PWD) which is the case when the test is run using
make -C tools/testing/selftests/futex/ run_tests.
Fixes: a8ba798bc8ec ("selftests: enable O and KBUILD_OUTPUT")
Signed-off-by: Shuah Khan <[email protected]>
Reviewed-by: Darren Hart (VMware) <[email protected]>
Signed-off-by: Shuah Khan <[email protected]>
|
|
Allow user to call install target.
Signed-off-by: Andy Shevchenko <[email protected]>
Signed-off-by: Jonathan Cameron <[email protected]>
|
|
There is a nice buildsystem dedicated for userspace tools in Linux kernel tree.
Switch iio target to be built by it.
Signed-off-by: Andy Shevchenko <[email protected]>
Signed-off-by: Jonathan Cameron <[email protected]>
|
|
Add test for xdp_redirect by creating two namespaces with two
veth peers, then forward packets in-between.
Signed-off-by: William Tu <[email protected]>
Cc: Daniel Borkmann <[email protected]>
Cc: John Fastabend <[email protected]>
Acked-by: Daniel Borkmann <[email protected]>
Acked-by: John Fastabend <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
Variable ctx accesses and stack accesses aren't allowed, because we can't
determine what type of value will be read.
Signed-off-by: Edward Cree <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
Signed-off-by: Edward Cree <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
A number of selftests fell foul of the changed MAX_PACKET_OFF handling.
For instance, "direct packet access: test2" was potentially reading four
bytes from pkt + 0xffff, which could take it past the verifier's limit,
causing the program to be rejected (checks against pkt_end didn't give
us any reg->range).
Increase the shifts by one so that R2 is now mask 0x7fff instead of
mask 0xffff.
Signed-off-by: Edward Cree <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
Tests non-add/sub operations (AND, LSH) on pointers decaying them to
unknown scalars.
Also tests that a pkt_ptr add which could potentially overflow is rejected
(find_good_pkt_pointers ignores it and doesn't give us any reg->range).
Signed-off-by: Edward Cree <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
New test adds 14 to the unknown value before adding to the packet pointer,
meaning there's no 'fixed offset' field and instead we add into the
var_off, yielding a '4n+2' value.
Signed-off-by: Edward Cree <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
Expectations have changed, as has the format of the logged state.
To make the tests easier to read, add a line-matching framework so that
each match need only quote the register it cares about. (Multiple
matches may refer to the same line, but matches must be listed in
order of increasing line.)
Signed-off-by: Edward Cree <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
Some of the verifier's error messages have changed, and some constructs
that previously couldn't be verified are now accepted.
Signed-off-by: Edward Cree <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
We had just forogtten to do this. Without this the following test fails:
$ sudo make -C tools/testing/selftests/sysctl/ run_tests
make: Entering directory '/home/mcgrof/linux-next/tools/testing/selftests/sysctl'
/bin/sh: ./sysctl.sh: Permission denied
selftests: sysctl.sh [FAIL]
/home/mcgrof/linux-next/tools/testing/selftests/sysctl
make: Leaving directory '/home/mcgrof/linux-next/tools/testing/selftests/sysctl'
Fixes: 64b671204afd71 ("test_sysctl: add generic script to expand on tests")
Signed-off-by: Luis R. Rodriguez <[email protected]>
Signed-off-by: Shuah Khan <[email protected]>
|
|
We had just forgotten to do this. Without this if we run the
following we get a permission denied:
sudo make -C tools/testing/selftests/kmod/ run_tests
make: Entering directory '/home/mcgrof/linux-next/tools/testing/selftests/kmod'
/bin/sh: ./kmod.sh: Permission denied
selftests: kmod.sh [FAIL]
/home/mcgrof/linux-next/tools/testing/selftests/kmod
make: Leaving directory '/home/mcgrof/linux-next/tools/testing/selftests/kmod
Fixes: 39258f448d71 ("kmod: add test driver to stress test the module loader")
Signed-off-by: Luis R. Rodriguez <[email protected]>
Signed-off-by: Shuah Khan <[email protected]>
|
|
Commit 18f3d6be6be1 ("selftests/bpf: Add test cases to test narrower ctx field loads")
introduced new eBPF test cases. One of them (test_pkt_md_access.c)
fails on s390x. The BPF verifier error message is:
[root@s8360046 bpf]# ./test_progs
test_pkt_access:PASS:ipv4 349 nsec
test_pkt_access:PASS:ipv6 212 nsec
[....]
libbpf: load bpf program failed: Permission denied
libbpf: -- BEGIN DUMP LOG ---
libbpf:
0: (71) r2 = *(u8 *)(r1 +0)
invalid bpf_context access off=0 size=1
libbpf: -- END LOG --
libbpf: failed to load program 'test1'
libbpf: failed to load object './test_pkt_md_access.o'
Summary: 29 PASSED, 1 FAILED
[root@s8360046 bpf]#
This is caused by a byte endianness issue. S390x is a big endian
architecture. Pointer access to the lowest byte or halfword of a
four byte value need to add an offset.
On little endian architectures this offset is not needed.
Fix this and use the same approach as the originator used for other files
(for example test_verifier.c) in his original commit.
With this fix the test program test_progs succeeds on s390x:
[root@s8360046 bpf]# ./test_progs
test_pkt_access:PASS:ipv4 236 nsec
test_pkt_access:PASS:ipv6 217 nsec
test_xdp:PASS:ipv4 3624 nsec
test_xdp:PASS:ipv6 1722 nsec
test_l4lb:PASS:ipv4 926 nsec
test_l4lb:PASS:ipv6 1322 nsec
test_tcp_estats:PASS: 0 nsec
test_bpf_obj_id:PASS:get-fd-by-notexist-prog-id 0 nsec
test_bpf_obj_id:PASS:get-fd-by-notexist-map-id 0 nsec
test_bpf_obj_id:PASS:get-prog-info(fd) 0 nsec
test_bpf_obj_id:PASS:get-map-info(fd) 0 nsec
test_bpf_obj_id:PASS:get-prog-info(fd) 0 nsec
test_bpf_obj_id:PASS:get-map-info(fd) 0 nsec
test_bpf_obj_id:PASS:get-prog-fd(next_id) 0 nsec
test_bpf_obj_id:PASS:get-prog-info(next_id->fd) 0 nsec
test_bpf_obj_id:PASS:get-prog-fd(next_id) 0 nsec
test_bpf_obj_id:PASS:get-prog-info(next_id->fd) 0 nsec
test_bpf_obj_id:PASS:check total prog id found by get_next_id 0 nsec
test_bpf_obj_id:PASS:get-map-fd(next_id) 0 nsec
test_bpf_obj_id:PASS:get-map-fd(next_id) 0 nsec
test_bpf_obj_id:PASS:get-map-fd(next_id) 0 nsec
test_bpf_obj_id:PASS:get-map-fd(next_id) 0 nsec
test_bpf_obj_id:PASS:get-map-fd(next_id) 0 nsec
test_bpf_obj_id:PASS:get-map-fd(next_id) 0 nsec
test_bpf_obj_id:PASS:get-map-fd(next_id) 0 nsec
test_bpf_obj_id:PASS:check get-map-info(next_id->fd) 0 nsec
test_bpf_obj_id:PASS:get-map-fd(next_id) 0 nsec
test_bpf_obj_id:PASS:check get-map-info(next_id->fd) 0 nsec
test_bpf_obj_id:PASS:check total map id found by get_next_id 0 nsec
test_pkt_md_access:PASS: 277 nsec
Summary: 30 PASSED, 0 FAILED
[root@s8360046 bpf]#
Fixes: 18f3d6be6be1 ("selftests/bpf: Add test cases to test narrower ctx field loads")
Signed-off-by: Thomas Richter <[email protected]>
Acked-by: Daniel Borkmann <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
We really must check with #if __BYTE_ORDER == XYZ instead of
just presence of #ifdef __LITTLE_ENDIAN. I noticed that when
actually running this on big endian machine, the latter test
resolves to true for user space, same for #ifdef __BIG_ENDIAN.
E.g., looking at endian.h from libc, both are also defined
there, so we really must test this against __BYTE_ORDER instead
for proper insns selection. For the kernel, such checks are
fine though e.g. see 13da9e200fe4 ("Revert "endian: #define
__BYTE_ORDER"") and 415586c9e6d3 ("UAPI: fix endianness conditionals
in M32R's asm/stat.h") for some more context, but not for
user space. Lets also make sure to properly include endian.h.
After that, suite passes for me:
./test_verifier: ELF 64-bit MSB executable, [...]
Linux foo 4.13.0-rc3+ #4 SMP Fri Aug 4 06:59:30 EDT 2017 s390x s390x s390x GNU/Linux
Before fix: Summary: 505 PASSED, 11 FAILED
After fix: Summary: 516 PASSED, 0 FAILED
Fixes: 18f3d6be6be1 ("selftests/bpf: Add test cases to test narrower ctx field loads")
Signed-off-by: Daniel Borkmann <[email protected]>
Acked-by: Yonghong <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
The BPF feature test as well as libbpf is missing the __NR_bpf
define for s390 and currently refuses to compile (selftest suite
depends on libbpf as well). Similar issue was fixed some time
ago via b0c47807d31d ("bpf: Add sparc support to tools and
samples."), just do the same and add definitions.
Signed-off-by: Daniel Borkmann <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
Introduce regression test for msg_zerocopy feature. Send traffic from
one process to another with and without zerocopy.
Evaluate tcp, udp, raw and packet sockets, including variants
- udp: corking and corking with mixed copy/zerocopy calls
- raw: with and without hdrincl
- packet: at both raw and dgram level
Test on both ipv4 and ipv6, optionally with ethtool changes to
disable scatter-gather, tx checksum or tso offload. All of these
can affect zerocopy behavior.
The regression test can be run on a single machine if over a veth
pair. Then skb_orphan_frags_rx must be modified to be identical to
skb_orphan_frags to allow forwarding zerocopy locally.
The msg_zerocopy.sh script will setup the veth pair in network
namespaces and run all tests.
Signed-off-by: Willem de Bruijn <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
ACPICA commit 343fc31840d40c06001f3b170ee5bcdfd3c7f3e0
ACPI spec allows to configure different 32-bit/64-bit table addresses for
DSDT and FACS. And for FACS, it's meaningful to dump both of them as they
are used to support different suspend protocols.
While:
1. on Linux, only 1 instance is supported for DSDT/FACS; and
2. on EFI, the code in osl_get_table() is buggy with special table instances,
causing endless file dump for such tables (reported by Shao Ming in link
#2).
This patch adds DSDT/FACS instance support for Linux/EFI acpidump. Fixed by
Lv Zheng.
Link: https://github.com/acpica/acpica/commit/343fc318
Link: https://bugs.acpica.org/show_bug.cgi?id=1407 [#1]
Link: https://github.com/acpica/acpica/issues/285 [#2]
Reported-by: Shao Ming <[email protected]>
Signed-off-by: Lv Zheng <[email protected]>
Signed-off-by: Bob Moore <[email protected]>
Signed-off-by: Rafael J. Wysocki <[email protected]>
|
|
ACPICA commit 01b8f5a2350b9cc329cd8402ac8faec36fc501f5
In order to build ACPICA EFI tools with EDK-II on Windows, 64-bit
multiply/shift supports are also required to be implemented. Otherwise,
MSVC complains:
acpidump.lib(utstrtoul64.obj) : error LNK2001: unresolved external symbol __allmul
acpidump.lib(uthex.obj) : error LNK2001: unresolved external symbol __aullshr
Note:
1. This patch also splits _EDK2_EFI from _GNU_EFI as they might have
different math64 supports.
2. Support of gcc math64 is not included in this patch.
3. Support of EDK2 arch independent math64 is done via linking to base_lib.
This patch fixes this issue. Reported by Shao Ming, fixed by Lv Zheng.
For Linux kernel, this patch is a functional no-op.
Link: https://github.com/acpica/acpica/commit/01b8f5a2
Tested-by: "Shao, Ming" <[email protected]>
Signed-off-by: Lv Zheng <[email protected]>
Signed-off-by: Bob Moore <[email protected]>
Signed-off-by: Rafael J. Wysocki <[email protected]>
|
|
No longer needed, now all managed by transparent VF logic.
Signed-off-by: Stephen Hemminger <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
After the link tests, there is a race on one side of the test for
the link coming up. It's possible, in some cases, for the test script
to write to the 'peer_trans' files before the link has come up.
To fix this, we simply use the link event file to ensure both sides
see the link as up before continuning.
Signed-off-by: Logan Gunthorpe <[email protected]>
Acked-by: Allen Hubbe <[email protected]>
Signed-off-by: Jon Mason <[email protected]>
Fixes: a9c59ef77458 ("ntb_test: Add a selftest script for the NTB subsystem")
|
|
Two minor conflicts in virtio_net driver (bug fix overlapping addition
of a helper) and MAINTAINERS (new driver edit overlapping revamp of
PHY entry).
Signed-off-by: David S. Miller <[email protected]>
|
|
Also trying a new approach, using the copy of uapi/linux/perf_event.h we
auto generate the string tables, then include it in the ioctl cmd
beautifier.
This way either the perf developers will add the new commands to the
tools/ copy, like is happening with other areas of tools/include/ (bpf.h
comes to mind), or we'll be notified when building perf that our copy
drifted.
E.g., looking at some of the perf ioctls issued by the 'perf test' test cases:
# (perf trace -e perf_event_open,ioctl perf test) 2>&1 | egrep "(cmd: PERF_|perf_event_open)"
4: Read samples using the mmap interface :
348.811 ( 0.062 ms): perf/23351 perf_event_open(attr_uptr: 0x414a5e8, pid: 23351 (perf), group_fd: -1, flags: FD_CLOEXEC) = 3
348.878 ( 0.039 ms): perf/23351 perf_event_open(attr_uptr: 0x414a5e8, pid: 23351 (perf), cpu: 1, group_fd: -1, flags: FD_CLOEXEC) = 4
348.919 ( 0.036 ms): perf/23351 perf_event_open(attr_uptr: 0x414a5e8, pid: 23351 (perf), cpu: 2, group_fd: -1, flags: FD_CLOEXEC) = 5
348.958 ( 0.036 ms): perf/23351 perf_event_open(attr_uptr: 0x414a5e8, pid: 23351 (perf), cpu: 3, group_fd: -1, flags: FD_CLOEXEC) = 6
349.070 ( 0.046 ms): perf/23351 perf_event_open(attr_uptr: 0x414aa38, pid: 23351 (perf), group_fd: -1, flags: FD_CLOEXEC) = 7
349.120 ( 0.037 ms): perf/23351 perf_event_open(attr_uptr: 0x414aa38, pid: 23351 (perf), cpu: 1, group_fd: -1, flags: FD_CLOEXEC) = 8
349.161 ( 0.036 ms): perf/23351 perf_event_open(attr_uptr: 0x414aa38, pid: 23351 (perf), cpu: 2, group_fd: -1, flags: FD_CLOEXEC) = 9
349.201 ( 0.035 ms): perf/23351 perf_event_open(attr_uptr: 0x414aa38, pid: 23351 (perf), cpu: 3, group_fd: -1, flags: FD_CLOEXEC) = 10
349.306 ( 0.041 ms): perf/23351 perf_event_open(attr_uptr: 0x414b2d8, pid: 23351 (perf), group_fd: -1, flags: FD_CLOEXEC) = 11
349.611 ( 0.005 ms): perf/23351 ioctl(fd: 3<anon_inode:[perf_event]>, cmd: PERF_ID, arg: 0x7fff025999b8) = 0
349.619 ( 0.002 ms): perf/23351 ioctl(fd: 7<anon_inode:[perf_event]>, cmd: PERF_SET_OUTPUT, arg: 0x3 ) = 0
349.623 ( 0.002 ms): perf/23351 ioctl(fd: 7<anon_inode:[perf_event]>, cmd: PERF_ID, arg: 0x7fff025999b8) = 0
349.627 ( 0.002 ms): perf/23351 ioctl(fd: 11<anon_inode:[perf_event]>, cmd: PERF_SET_OUTPUT, arg: 0x3 ) = 0
349.630 ( 0.001 ms): perf/23351 ioctl(fd: 11<anon_inode:[perf_event]>, cmd: PERF_ID, arg: 0x7fff025999b8) = 0
<SNIP>
7: PERF_RECORD_* events & perf_sample fields :
647.150 ( 0.014 ms): perf/23354 perf_event_open(attr_uptr: 0x7fff02599920, pid: -1, cpu: 2, group_fd: -1, flags: FD_CLOEXEC) = 3
647.197 ( 0.076 ms): perf/23354 perf_event_open(attr_uptr: 0x414b478, pid: -1, group_fd: -1, flags: FD_CLOEXEC) = 3
647.289 ( 0.040 ms): perf/23354 perf_event_open(attr_uptr: 0x414b478, pid: -1, group_fd: -1, flags: FD_CLOEXEC) = 3
647.368 ( 0.011 ms): perf/23354 perf_event_open(attr_uptr: 0x414a5e8, pid: 23355 (perf), group_fd: -1, flags: FD_CLOEXEC) = 3
647.381 ( 0.005 ms): perf/23354 perf_event_open(attr_uptr: 0x414a5e8, pid: 23355 (perf), cpu: 1, group_fd: -1, flags: FD_CLOEXEC) = 4
647.387 ( 0.005 ms): perf/23354 perf_event_open(attr_uptr: 0x414a5e8, pid: 23355 (perf), cpu: 2, group_fd: -1, flags: FD_CLOEXEC) = 5
647.393 ( 0.004 ms): perf/23354 perf_event_open(attr_uptr: 0x414a5e8, pid: 23355 (perf), cpu: 3, group_fd: -1, flags: FD_CLOEXEC) = 7
648.026 ( 0.011 ms): perf/23354 ioctl(fd: 3<anon_inode:[perf_event]>, cmd: PERF_ENABLE) = 0
648.038 ( 0.002 ms): perf/23354 ioctl(fd: 4<anon_inode:[perf_event]>, cmd: PERF_ENABLE) = 0
648.042 ( 0.002 ms): perf/23354 ioctl(fd: 5<anon_inode:[perf_event]>, cmd: PERF_ENABLE) = 0
648.045 ( 0.002 ms): perf/23354 ioctl(fd: 7<anon_inode:[perf_event]>, cmd: PERF_ENABLE) = 0
<SNIP>
18: Breakpoint overflow signal handler :
2772.721 ( 0.017 ms): perf/23375 perf_event_open(attr_uptr: 0x7fff02599d20, pid: -1, cpu: 3, group_fd: -1, flags: FD_CLOEXEC) = 3
2772.748 ( 0.009 ms): perf/23375 perf_event_open(attr_uptr: 0x7fff02599e60, cpu: -1, group_fd: -1, flags: FD_CLOEXEC) = 3
2772.768 ( 0.002 ms): perf/23375 ioctl(fd: 3, cmd: PERF_RESET) = 0
2772.776 ( 0.008 ms): perf/23375 perf_event_open(attr_uptr: 0x7fff02599e60, cpu: -1, group_fd: -1, flags: FD_CLOEXEC) = 4
2772.788 ( 0.002 ms): perf/23375 ioctl(fd: 4, cmd: PERF_RESET) = 0
2772.791 ( 0.006 ms): perf/23375 perf_event_open(attr_uptr: 0x7fff02599e60, cpu: -1, group_fd: -1, flags: FD_CLOEXEC) = 5
2772.800 ( 0.001 ms): perf/23375 ioctl(fd: 5, cmd: PERF_RESET) = 0
2772.803 ( 0.005 ms): perf/23375 ioctl(fd: 3, cmd: PERF_ENABLE) = 0
2772.810 ( 0.004 ms): perf/23375 ioctl(fd: 4, cmd: PERF_ENABLE) = 0
2772.815 ( 0.004 ms): perf/23375 ioctl(fd: 5, cmd: PERF_ENABLE) = 0
<SNIP>
Cc: Adrian Hunter <[email protected]>
Cc: David Ahern <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Wang Nan <[email protected]>
Link: http://lkml.kernel.org/n/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
Also trying a new approach, using a copy of uapi/linux/vhost.h we auto
generate the string tables, then include it in the ioctl cmd beautifier.
This way either the KVM developers will add the new commands to the
tools/ copy, like is happening with other areas of tools/include/ (bpf.h
comes to mind), or we'll be notified when building perf that our copy
drifted.
E.g., doing syswide tracing grepping for the newly beautified VHOST
ioctls:
# perf trace -e ioctl 2>&1 | grep VHOST
3873.064 ( 0.099 ms): qemu-system-x8/21238 ioctl(fd: 27</dev/vhost-net>, cmd: VHOST_NET_SET_BACKEND, arg: 0x7fff053dffe0) = 0
3873.168 ( 0.019 ms): qemu-system-x8/21238 ioctl(fd: 27</dev/vhost-net>, cmd: VHOST_NET_SET_BACKEND, arg: 0x7fff053dffe0) = 0
3873.226 ( 0.006 ms): qemu-system-x8/21238 ioctl(fd: 27</dev/vhost-net>, cmd: VHOST_GET_VRING_BASE, arg: 0x7fff053dff60) = 0
3873.244 ( 0.002 ms): qemu-system-x8/21238 ioctl(fd: 27</dev/vhost-net>, cmd: VHOST_GET_VRING_BASE, arg: 0x7fff053dff60) = 0
3873.817 ( 0.014 ms): qemu-system-x8/21238 ioctl(fd: 27</dev/vhost-net>, cmd: VHOST_SET_VRING_CALL, arg: 0x7fff053dff20) = 0
3873.838 ( 0.004 ms): qemu-system-x8/21238 ioctl(fd: 27</dev/vhost-net>, cmd: VHOST_SET_VRING_CALL, arg: 0x7fff053dff20) = 0
4701.372 ( 0.006 ms): qemu-system-x8/21238 ioctl(fd: 27</dev/vhost-net>, cmd: VHOST_SET_VRING_CALL, arg: 0x7fff053dfe20) = 0
4701.417 ( 0.007 ms): qemu-system-x8/21238 ioctl(fd: 27</dev/vhost-net>, cmd: VHOST_SET_VRING_CALL, arg: 0x7fff053dfe20) = 0
4701.563 ( 0.004 ms): qemu-system-x8/21238 ioctl(fd: 27</dev/vhost-net>, cmd: VHOST_SET_FEATURES, arg: 0x7fff053dfe88) = 0
4701.571 ( 0.028 ms): qemu-system-x8/21238 ioctl(fd: 27</dev/vhost-net>, cmd: VHOST_SET_MEM_TABLE, arg: 0x563c7c906870) = 0
4701.604 ( 0.003 ms): qemu-system-x8/21238 ioctl(fd: 27</dev/vhost-net>, cmd: VHOST_SET_VRING_NUM, arg: 0x7fff053dff00) = 0
4701.609 ( 0.002 ms): qemu-system-x8/21238 ioctl(fd: 27</dev/vhost-net>, cmd: VHOST_SET_VRING_BASE, arg: 0x7fff053dff00) = 0
4701.615 ( 0.002 ms): qemu-system-x8/21238 ioctl(fd: 27</dev/vhost-net>, cmd: VHOST_SET_VRING_ADDR, arg: 0x7fff053dfe70) = 0
4701.619 ( 0.008 ms): qemu-system-x8/21238 ioctl(fd: 27</dev/vhost-net>, cmd: VHOST_SET_VRING_KICK, arg: 0x7fff053dfef0) = 0
4701.634 ( 0.004 ms): qemu-system-x8/21238 ioctl(fd: 27</dev/vhost-net>, cmd: VHOST_SET_VRING_NUM, arg: 0x7fff053dff00) = 0
4701.640 ( 0.002 ms): qemu-system-x8/21238 ioctl(fd: 27</dev/vhost-net>, cmd: VHOST_SET_VRING_BASE, arg: 0x7fff053dff00) = 0
4701.644 ( 0.002 ms): qemu-system-x8/21238 ioctl(fd: 27</dev/vhost-net>, cmd: VHOST_SET_VRING_ADDR, arg: 0x7fff053dfe70) = 0
4701.648 ( 0.009 ms): qemu-system-x8/21238 ioctl(fd: 27</dev/vhost-net>, cmd: VHOST_SET_VRING_KICK, arg: 0x7fff053dfef0) = 0
4701.665 ( 0.005 ms): qemu-system-x8/21238 ioctl(fd: 27</dev/vhost-net>, cmd: VHOST_NET_SET_BACKEND, arg: 0x7fff053dff80) = 0
4701.672 ( 0.004 ms): qemu-system-x8/21238 ioctl(fd: 27</dev/vhost-net>, cmd: VHOST_NET_SET_BACKEND, arg: 0x7fff053dff80) = 0
^C
'-e ioctl' uses tracepoint filters, in time this will be replaces by
eBPF filters hooked at the syscall tracepoints and that "grep VHOST"
will also be done with eBPF, right at the kernel, to reduce overhead.
Cc: Adrian Hunter <[email protected]>
Cc: David Ahern <[email protected]>
Cc: Jason Wang <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: "Michael S. Tsirkin" <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Paolo Bonzini <[email protected]>
Cc: Radim Krčmář <[email protected]>
Cc: Wang Nan <[email protected]>
Link: http://lkml.kernel.org/n/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
We will use it to generate tables for beautifying ioctl's 'cmd' arg.
Cc: Adrian Hunter <[email protected]>
Cc: David Ahern <[email protected]>
Cc: Jason Wang <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: "Michael S. Tsirkin" <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Wang Nan <[email protected]>
Link: http://lkml.kernel.org/n/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
Not all subsystems use the fact that we may have the same _IOC_NR for
different _IOC_DIR, as in the end it'll result in a different ioctl
number.
So, for instance, vhost virtio has:
#define VHOST_GET_FEATURES _IOR(VHOST_VIRTIO, 0x00, __u64)
#define VHOST_SET_FEATURES _IOW(VHOST_VIRTIO, 0x00, __u64)
So same _IOC_NR (0x00) but different _IOC_DIR (R versus W), but it also
have:
#define VHOST_SET_VRING_ENDIAN _IOW(VHOST_VIRTIO, 0x13, struct vhost_vring_state)
#define VHOST_GET_VRING_ENDIAN _IOW(VHOST_VIRTIO, 0x14, struct vhost_vring_state)
A "get" operation that uses a "W" _IOC_DIR, and its implementation, uses
copy_to_user, it should've probably been _IOR().
Then:
/* Base value where queue looks for available descriptors */
#define VHOST_SET_VRING_BASE _IOW(VHOST_VIRTIO, 0x12, struct vhost_vring_state)
/* Get accessor: reads index, writes value in num */
#define VHOST_GET_VRING_BASE _IOWR(VHOST_VIRTIO, 0x12, struct vhost_vring_state)
So we'll need to use _IOC_DIR() to disambiguate the VHOST_VIRTIO ioctl
bautifier.
Cc: Adrian Hunter <[email protected]>
Cc: David Ahern <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Paolo Bonzini <[email protected]>
Cc: Radim Krčmář <[email protected]>
Cc: Wang Nan <[email protected]>
Link: http://lkml.kernel.org/n/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
Also trying a new approach, using a copy of uapi/linux/kvm.h we auto
generate the string tables, then include it in the ioctl cmd beautifier.
This way either the KVM developers will add the new commands to the
tools/ copy, like is happening with other areas of tools/include/ (bpf.h
comes to mind), or we'll be notified when building perf that our copy
drifted.
E.g., a tracing a process and its threads, but would work for system wide as
well, just drop that '-p 21238', to see ioctls for DRM, tty, sound, etc:
# perf trace -e ioctl -p 21238 2>&1 | grep -v KVM_RUN
7801.536 ( 0.003 ms): CPU 0/KVM/21276 ioctl(fd: 13<anon_inode:kvm-vm>, cmd: KVM_IRQ_LINE_STATUS, arg: 0x7f484c6c73c0) = 0
<SNIP lots of the last one>
7801.715 ( 0.001 ms): CPU 0/KVM/21276 ioctl(fd: 13<anon_inode:kvm-vm>, cmd: KVM_IRQ_LINE_STATUS, arg: 0x7f484c6c73e0) = 0
11001.051 ( 0.008 ms): qemu-system-x8/21238 ioctl(fd: 13<anon_inode:kvm-vm>, cmd: KVM_SIGNAL_MSI, arg: 0x563c83379d70) = 1
11001.225 ( 0.005 ms): qemu-system-x8/21238 ioctl(fd: 13<anon_inode:kvm-vm>, cmd: KVM_SIGNAL_MSI, arg: 0x563c83379d70) = 1
10750.377 (249.963 ms): CPU 0/KVM/21276 ... [continued]: ioctl()) = 0
11011.780 ( 0.015 ms): qemu-system-x8/21238 ioctl(fd: 13<anon_inode:kvm-vm>, cmd: KVM_SIGNAL_MSI, arg: 0x563c83379d90) = 1
11011.929 ( 0.005 ms): qemu-system-x8/21238 ioctl(fd: 13<anon_inode:kvm-vm>, cmd: KVM_SIGNAL_MSI, arg: 0x7fff053e1000) = 1
11012.090 ( 0.004 ms): qemu-system-x8/21238 ioctl(fd: 13<anon_inode:kvm-vm>, cmd: KVM_SIGNAL_MSI, arg: 0x563c83379d70) = 1
11023.127 ( 0.020 ms): qemu-system-x8/21238 ioctl(fd: 13<anon_inode:kvm-vm>, cmd: KVM_SIGNAL_MSI, arg: 0x563c83379d90) = 1
11000.483 (249.807 ms): CPU 0/KVM/21276 ... [continued]: ioctl()) = 0
25620.877 ( 0.042 ms): qemu-system-x8/21238 ioctl(fd: 13<anon_inode:kvm-vm>, cmd: KVM_IRQ_LINE_STATUS, arg: 0x7fff053e1080) = 0
<SNIP several of the last one>
25621.025 ( 0.002 ms): qemu-system-x8/21238 ioctl(fd: 13<anon_inode:kvm-vm>, cmd: KVM_IRQ_LINE_STATUS, arg: 0x7fff053e10a0) = 0
25500.803 (120.186 ms): CPU 0/KVM/21276 ... [continued]: ioctl()) = 0
25621.078 ( 0.005 ms): CPU 0/KVM/21276 ioctl(fd: 13<anon_inode:kvm-vm>, cmd: KVM_IRQ_LINE_STATUS, arg: 0x7f484c6c73c0) = 0
<SNIP lots of the last one>
25621.346 ( 0.001 ms): CPU 0/KVM/21276 ioctl(fd: 13<anon_inode:kvm-vm>, cmd: KVM_IRQ_LINE_STATUS, arg: 0x7f484c6c73e0) = 0
40456.997 ( 0.100 ms): qemu-system-x8/21238 ioctl(fd: 27</dev/vhost-net>, cmd: (WRITE, 0xaf, 0x30, 0x8), arg: 0x7fff053dffe0) = 0
40457.100 ( 0.019 ms): qemu-system-x8/21238 ioctl(fd: 27</dev/vhost-net>, cmd: (WRITE, 0xaf, 0x30, 0x8), arg: 0x7fff053dffe0) = 0
40457.133 ( 0.002 ms): qemu-system-x8/21238 ioctl(fd: 27</dev/vhost-net>, cmd: (READ|WRITE, 0xaf, 0x12, 0x8), arg: 0x7fff053dff60) = 0
40457.139 ( 0.001 ms): qemu-system-x8/21238 ioctl(fd: 27</dev/vhost-net>, cmd: (READ|WRITE, 0xaf, 0x12, 0x8), arg: 0x7fff053dff60) = 0
40458.503 ( 0.027 ms): qemu-system-x8/21238 ioctl(fd: 13<anon_inode:kvm-vm>, cmd: KVM_IOEVENTFD, arg: 0x7fff053dfc80) = 0
40458.601 ( 0.030 ms): qemu-system-x8/21238 ioctl(fd: 13<anon_inode:kvm-vm>, cmd: KVM_IOEVENTFD, arg: 0x7fff053dfc80) = 0
40458.649 ( 0.003 ms): qemu-system-x8/21238 ioctl(fd: 27</dev/vhost-net>, cmd: (WRITE, 0xaf, 0x21, 0x8), arg: 0x7fff053dff20) = 0
40458.654 ( 0.002 ms): qemu-system-x8/21238 ioctl(fd: 27</dev/vhost-net>, cmd: (WRITE, 0xaf, 0x21, 0x8), arg: 0x7fff053dff20) = 0
40458.657 ( 0.018 ms): qemu-system-x8/21238 ioctl(fd: 13<anon_inode:kvm-vm>, cmd: KVM_IRQFD, arg: 0x7fff053dff00 ) = 0
40459.077 ( 0.017 ms): qemu-system-x8/21238 ioctl(fd: 13<anon_inode:kvm-vm>, cmd: KVM_IRQFD, arg: 0x7fff053dff00 ) = 0
40459.123 ( 0.017 ms): qemu-system-x8/21238 ioctl(fd: 13<anon_inode:kvm-vm>, cmd: KVM_IOEVENTFD, arg: 0x7fff053dfd20) = 0
<SNIP lots of the last one>
40463.477 ( 0.013 ms): qemu-system-x8/21238 ioctl(fd: 13<anon_inode:kvm-vm>, cmd: KVM_IOEVENTFD, arg: 0x7fff053dfd20) = 0
40464.874 ( 0.010 ms): qemu-system-x8/21238 ioctl(fd: 13<anon_inode:kvm-vm>, cmd: KVM_GET_VCPU_EVENTS, arg: 0x7fff053e0000) = 0
40464.892 ( 0.048 ms): qemu-system-x8/21238 ioctl(fd: 12</dev/kvm>, cmd: KVM_CHECK_EXTENSION, arg: 0x4c ) = 1
40464.991 ( 0.002 ms): qemu-system-x8/21238 ioctl(fd: 13<anon_inode:kvm-vm>, cmd: KVM_GET_CLOCK, arg: 0x7fff053e0040) = 0
40464.962 ( 0.013 ms): CPU 0/KVM/21276 ioctl(fd: 20<anon_inode:kvm-vcpu>, cmd: KVM_GET_MSRS, arg: 0x7f484c6c7670) = 1
44540.437 ( 0.103 ms): qemu-system-x8/21238 ioctl(fd: 13<anon_inode:kvm-vm>, cmd: KVM_SET_GSI_ROUTING, arg: 0x563c7c93c000) = 0
44540.544 ( 0.008 ms): qemu-system-x8/21238 ioctl(fd: 13<anon_inode:kvm-vm>, cmd: KVM_IRQFD, arg: 0x7fff053dfea0 ) = 0
44540.555 ( 0.029 ms): qemu-system-x8/21238 ioctl(fd: 13<anon_inode:kvm-vm>, cmd: KVM_SET_GSI_ROUTING, arg: 0x563c7c93c000) = 0
44540.586 ( 0.003 ms): qemu-system-x8/21238 ioctl(fd: 13<anon_inode:kvm-vm>, cmd: KVM_IRQFD, arg: 0x7fff053dfea0 ) = 0
44540.592 ( 0.027 ms): qemu-system-x8/21238 ioctl(fd: 13<anon_inode:kvm-vm>, cmd: KVM_SET_GSI_ROUTING, arg: 0x563c7c93c000) = 0
44540.625 ( 0.005 ms): qemu-system-x8/21238 ioctl(fd: 27</dev/vhost-net>, cmd: (WRITE, 0xaf, 0x21, 0x8), arg: 0x7fff053dfe20) = 0
44540.639 ( 0.018 ms): qemu-system-x8/21238 ioctl(fd: 13<anon_inode:kvm-vm>, cmd: KVM_SET_GSI_ROUTING, arg: 0x563c7c93c000) = 0
44540.658 ( 0.003 ms): qemu-system-x8/21238 ioctl(fd: 27</dev/vhost-net>, cmd: (WRITE, 0xaf, 0x21, 0x8), arg: 0x7fff053dfe20) = 0
44540.686 ( 0.015 ms): qemu-system-x8/21238 ioctl(fd: 13<anon_inode:kvm-vm>, cmd: KVM_IOEVENTFD, arg: 0x7fff053dfbe0) = 0
44540.727 ( 0.014 ms): qemu-system-x8/21238 ioctl(fd: 13<anon_inode:kvm-vm>, cmd: KVM_IOEVENTFD, arg: 0x7fff053dfbe0) = 0
44540.748 ( 0.005 ms): qemu-system-x8/21238 ioctl(fd: 27</dev/vhost-net>, cmd: (WRITE, 0xaf, 0, 0x8), arg: 0x7fff053dfe88) = 0
44540.754 ( 0.026 ms): qemu-system-x8/21238 ioctl(fd: 27</dev/vhost-net>, cmd: (WRITE, 0xaf, 0x3, 0x8), arg: 0x563c7c906870) = 0
44540.783 ( 0.002 ms): qemu-system-x8/21238 ioctl(fd: 27</dev/vhost-net>, cmd: (WRITE, 0xaf, 0x10, 0x8), arg: 0x7fff053dff00) = 0
44540.787 ( 0.002 ms): qemu-system-x8/21238 ioctl(fd: 27</dev/vhost-net>, cmd: (WRITE, 0xaf, 0x12, 0x8), arg: 0x7fff053dff00) = 0
44540.793 ( 0.002 ms): qemu-system-x8/21238 ioctl(fd: 27</dev/vhost-net>, cmd: (WRITE, 0xaf, 0x11, 0x28), arg: 0x7fff053dfe70) = 0
44540.796 ( 0.010 ms): qemu-system-x8/21238 ioctl(fd: 27</dev/vhost-net>, cmd: (WRITE, 0xaf, 0x20, 0x8), arg: 0x7fff053dfef0) = 0
44540.811 ( 0.002 ms): qemu-system-x8/21238 ioctl(fd: 27</dev/vhost-net>, cmd: (WRITE, 0xaf, 0x10, 0x8), arg: 0x7fff053dff00) = 0
44540.814 ( 0.002 ms): qemu-system-x8/21238 ioctl(fd: 27</dev/vhost-net>, cmd: (WRITE, 0xaf, 0x12, 0x8), arg: 0x7fff053dff00) = 0
44540.819 ( 0.002 ms): qemu-system-x8/21238 ioctl(fd: 27</dev/vhost-net>, cmd: (WRITE, 0xaf, 0x11, 0x28), arg: 0x7fff053dfe70) = 0
44540.822 ( 0.005 ms): qemu-system-x8/21238 ioctl(fd: 27</dev/vhost-net>, cmd: (WRITE, 0xaf, 0x20, 0x8), arg: 0x7fff053dfef0) = 0
44540.837 ( 0.006 ms): qemu-system-x8/21238 ioctl(fd: 27</dev/vhost-net>, cmd: (WRITE, 0xaf, 0x30, 0x8), arg: 0x7fff053dff80) = 0
44540.862 ( 0.004 ms): qemu-system-x8/21238 ioctl(fd: 27</dev/vhost-net>, cmd: (WRITE, 0xaf, 0x30, 0x8), arg: 0x7fff053dff80) = 0
44540.887 ( 0.014 ms): qemu-system-x8/21238 ioctl(fd: 13<anon_inode:kvm-vm>, cmd: KVM_IOEVENTFD, arg: 0x7fff053dfd00) = 0
<SNIP lots of the last one>
44542.756 ( 0.020 ms): qemu-system-x8/21238 ioctl(fd: 13<anon_inode:kvm-vm>, cmd: KVM_IOEVENTFD, arg: 0x7fff053dfd00) = 0
44542.809 ( 0.007 ms): qemu-system-x8/21238 ioctl(fd: 13<anon_inode:kvm-vm>, cmd: KVM_SET_VCPU_EVENTS, arg: 0x7fff053dffb0) = 0
44542.819 ( 0.003 ms): qemu-system-x8/21238 ioctl(fd: 12</dev/kvm>, cmd: KVM_CHECK_EXTENSION, arg: 0x4c ) = 1
44543.016 ( 0.004 ms): qemu-system-x8/21238 ioctl(fd: 13<anon_inode:kvm-vm>, cmd: KVM_SET_CLOCK, arg: 0x7fff053dfff0) = 0
44543.022 ( 0.008 ms): qemu-system-x8/21238 ioctl(fd: 20<anon_inode:kvm-vcpu>, cmd: KVM_KVMCLOCK_CTRL ) = 0
46952.502 ( 0.010 ms): qemu-system-x8/21238 ioctl(fd: 13<anon_inode:kvm-vm>, cmd: KVM_SIGNAL_MSI, arg: 0x563c83379d70) = 1
46829.292 (249.860 ms): CPU 0/KVM/21276 ... [continued]: ioctl()) = 0
^C
[root@jouet linux]#
Since there are clashes in _IOC_NR() for some cases, notably ioctls with
PPC_ and ARM_ in its name and some that depend on some internal state to
be valid, but use the same number as others, those were removed in the
shell script that builds the table, tools/perf/trace/beauty/kvm_ioctl.sh.
Since so far we're supporting only x86 in the 'cmd' ioctl arg beautifier
in perf trace, we can leave fully supporting these ioctls for later.
There are some more to handle here, notably the one for /dev/vhost-net, will
come later.
Cc: Adrian Hunter <[email protected]>
Cc: David Ahern <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Paolo Bonzini <[email protected]>
Cc: Radim Krčmář <[email protected]>
Cc: Wang Nan <[email protected]>
Link: http://lkml.kernel.org/n/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
We will use it to generate tables for beautifying ioctl's 'cmd' arg.
Cc: Adrian Hunter <[email protected]>
Cc: David Ahern <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Wang Nan <[email protected]>
Link: http://lkml.kernel.org/n/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
This time we try a new approach, using a copy of uapi/sound/asound.h we
auto generate the string tables, then include it in the ioctl cmd
beautifier.
This way either the sound developers will add the new commands to the
tools/ copy, like is happening with other areas of tools/include/ (bpf.h
comes to mind), or we'll be notified when building perf that our copy
drifted.
E.g.:
# perf trace -p 22084 -e ioctl 2>&1 | head -5
0.000 ( 0.068 ms): alsa-sink-ALC3/22084 ioctl(fd: 49</dev/snd/pcmC1D0p>, cmd: SNDRV_PCM_HWSYNC, arg: 0x557f8d7fa0f0) = 0
0.344 ( 0.041 ms): alsa-sink-ALC3/22084 ioctl(fd: 46</dev/snd/controlC1>, cmd: SNDRV_CTL_ELEM_READ, arg: 0x7fe764018ee0) = 0
0.403 ( 0.011 ms): alsa-sink-ALC3/22084 ioctl(fd: 49</dev/snd/pcmC1D0p>, cmd: SNDRV_PCM_HWSYNC, arg: 0x557f8d7fa0f0) = 0
0.427 ( 0.009 ms): alsa-sink-ALC3/22084 ioctl(fd: 49</dev/snd/pcmC1D0p>, cmd: SNDRV_PCM_STATUS_EXT, arg: 0x7fe76c2e0b30) = 0
2.461 ( 0.042 ms): alsa-sink-ALC3/22084 ioctl(fd: 49</dev/snd/pcmC1D0p>, cmd: SNDRV_PCM_HWSYNC, arg: 0x557f8d7fa0f0) = 0
#
Cc: Adrian Hunter <[email protected]>
Cc: David Ahern <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Wang Nan <[email protected]>
Link: http://lkml.kernel.org/n/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
We will use it to generate tables for beautifying ioctl's 'cmd' arg.
Cc: Adrian Hunter <[email protected]>
Cc: David Ahern <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Wang Nan <[email protected]>
Link: http://lkml.kernel.org/n/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
This time we try a new approach, using uapi/drm/ copies of drm.h and
i915_drm.h we auto generate the string tables, then include it in the
ioctl cmd beautifier.
This way either the DRM developers will add the new commands to the
tools/ copy, like is happening with other areas of tools/include/ (bpf.h
comes to mind), or we'll be notified when building perf that our copy
drifted.
Either way the time from a new command being added to when 'perf trace'
gets to know it is greatly shortened, for instance:
# strace -p 22401 -e ioctl
ioctl(8, DRM_IOCTL_I915_GEM_BUSY, 0x7ffc934f7600) = 0
ioctl(8, DRM_IOCTL_I915_GEM_SET_DOMAIN, 0x7ffc934f7550) = 0
ioctl(8, DRM_IOCTL_I915_GEM_SW_FINISH, 0x7ffc934f76e0) = 0
ioctl(8, DRM_IOCTL_I915_GEM_SW_FINISH, 0x7ffc934f7780) = 0
ioctl(8, _IOC(_IOC_READ|_IOC_WRITE, 0x64, 0x69, 0x40), 0x7ffc934f7700) = 0
ioctl(8, DRM_IOCTL_I915_GEM_SET_DOMAIN, 0x7ffc934f7780) = 0
ioctl(8, DRM_IOCTL_I915_GEM_MADVISE, 0x7ffc934f76f0) = 0
ioctl(8, DRM_IOCTL_I915_GEM_BUSY, 0x7ffc934f76c0) = 0
ioctl(8, DRM_IOCTL_I915_GEM_MADVISE, 0x7ffc934f76b0) = 0
ioctl(8, DRM_IOCTL_I915_GEM_SET_DOMAIN, 0x7ffc934f76d0) = 0
ioctl(8, DRM_IOCTL_MODE_ADDFB, 0x7ffc934f7880) = 0
ioctl(8, DRM_IOCTL_MODE_PAGE_FLIP, 0x7ffc934f77d0) = 0
^Cstrace: Process 22401 detached
versus:
# perf trace -p 22401 -e ioctl
1010.856 (0.006 ms): gnome-shell/22401 ioctl(fd: 8</dev/dri/card0>, cmd: DRM_I915_GEM_BUSY, arg: 0x7ffc934f7600) = 0
1010.865 (0.003 ms): gnome-shell/22401 ioctl(fd: 8</dev/dri/card0>, cmd: DRM_I915_GEM_SET_DOMAIN, arg: 0x7ffc934f7550) = 0
1010.872 (0.002 ms): gnome-shell/22401 ioctl(fd: 8</dev/dri/card0>, cmd: DRM_I915_GEM_SW_FINISH, arg: 0x7ffc934f76e0) = 0
1010.939 (0.015 ms): gnome-shell/22401 ioctl(fd: 8</dev/dri/card0>, cmd: DRM_I915_GEM_SW_FINISH, arg: 0x7ffc934f7780) = 0
1010.959 (0.085 ms): gnome-shell/22401 ioctl(fd: 8</dev/dri/card0>, cmd: DRM_I915_GEM_EXECBUFFER2, arg: 0x7ffc934f7700) = 0
1011.048 (0.003 ms): gnome-shell/22401 ioctl(fd: 8</dev/dri/card0>, cmd: DRM_I915_GEM_SET_DOMAIN, arg: 0x7ffc934f7780) = 0
1011.056 (0.002 ms): gnome-shell/22401 ioctl(fd: 8</dev/dri/card0>, cmd: DRM_I915_GEM_MADVISE, arg: 0x7ffc934f76f0) = 0
1011.060 (0.002 ms): gnome-shell/22401 ioctl(fd: 8</dev/dri/card0>, cmd: DRM_I915_GEM_BUSY, arg: 0x7ffc934f76c0) = 0
1011.064 (0.003 ms): gnome-shell/22401 ioctl(fd: 8</dev/dri/card0>, cmd: DRM_I915_GEM_MADVISE, arg: 0x7ffc934f76b0) = 0
1011.068 (0.002 ms): gnome-shell/22401 ioctl(fd: 8</dev/dri/card0>, cmd: DRM_I915_GEM_SET_DOMAIN, arg: 0x7ffc934f76d0) = 0
1011.074 (0.009 ms): gnome-shell/22401 ioctl(fd: 8</dev/dri/card0>, cmd: DRM_MODE_ADDFB, arg: 0x7ffc934f7880 ) = 0
1011.096 (0.072 ms): gnome-shell/22401 ioctl(fd: 8</dev/dri/card0>, cmd: DRM_MODE_PAGE_FLIP, arg: 0x7ffc934f77d0) = 0
^C[root@jouet linux]#
Cc: Adrian Hunter <[email protected]>
Cc: David Ahern <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Wang Nan <[email protected]>
Link: http://lkml.kernel.org/n/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
We will use it to generate tables for beautifying ioctl's 'cmd' arg.
Cc: Adrian Hunter <[email protected]>
Cc: David Ahern <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Wang Nan <[email protected]>
Link: http://lkml.kernel.org/n/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
By using the _IOC_(DIR,NR,TYPE,SIZE) macros to lookup a 'type' keyed
table that then gets indexed by 'nr', falling back to a notation similar
to the one used by 'strace', only more compact, i.e.:
474.356 ( 0.007 ms): gnome-shell/22401 ioctl(fd: 8</dev/dri/card0>, cmd: (READ|WRITE, 0x64, 0xae, 0x1c), arg: 0x7ffc934f7880) = 0
474.369 ( 0.053 ms): gnome-shell/22401 ioctl(fd: 8</dev/dri/card0>, cmd: (READ|WRITE, 0x64, 0xb0, 0x18), arg: 0x7ffc934f77d0) = 0
505.055 ( 0.014 ms): gnome-shell/22401 ioctl(fd: 8</dev/dri/card0>, cmd: (READ|WRITE, 0x64, 0xaf, 0x4), arg: 0x7ffc934f741c) = 0
This also moves it out of builtin-trace.c and into trace/beauty/ioctl.c
to better compartimentalize all these formatters.
Cc: Adrian Hunter <[email protected]>
Cc: David Ahern <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Wang Nan <[email protected]>
Link: http://lkml.kernel.org/n/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
Pull networking fixes from David Miller:
1) Handle notifier registry failures properly in tun/tap driver, from
Tonghao Zhang.
2) Fix bpf verifier handling of subtraction bounds and add a testcase
for this, from Edward Cree.
3) Increase reset timeout in ftgmac100 driver, from Ben Herrenschmidt.
4) Fix use after free in prd_retire_rx_blk_timer_exired() in AF_PACKET,
from Cong Wang.
5) Fix SElinux regression due to recent UDP optimizations, from Paolo
Abeni.
6) We accidently increment IPSTATS_MIB_FRAGFAILS in the ipv6 code
paths, fix from Stefano Brivio.
7) Fix some mem leaks in dccp, from Xin Long.
8) Adjust MDIO_BUS kconfig deps to avoid build errors, from Arnd
Bergmann.
9) Mac address length check and buffer size fixes from Cong Wang.
10) Don't leak sockets in ipv6 udp early demux, from Paolo Abeni.
11) Fix return value when copy_from_user() fails in
bpf_prog_get_info_by_fd(), from Daniel Borkmann.
12) Handle PHY_HALTED properly in phy library state machine, from
Florian Fainelli.
13) Fix OOPS in fib_sync_down_dev(), from Ido Schimmel.
14) Fix truesize calculation in virtio_net which led to performance
regressions, from Michael S Tsirkin.
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (76 commits)
samples/bpf: fix bpf tunnel cleanup
udp6: fix jumbogram reception
ppp: Fix a scheduling-while-atomic bug in del_chan
Revert "net: bcmgenet: Remove init parameter from bcmgenet_mii_config"
virtio_net: fix truesize for mergeable buffers
mv643xx_eth: fix of_irq_to_resource() error check
MAINTAINERS: Add more files to the PHY LIBRARY section
ipv4: fib: Fix NULL pointer deref during fib_sync_down_dev()
net: phy: Correctly process PHY_HALTED in phy_stop_machine()
sunhme: fix up GREG_STAT and GREG_IMASK register offsets
bpf: fix bpf_prog_get_info_by_fd to dump correct xlated_prog_len
tcp: avoid bogus gcc-7 array-bounds warning
net: tc35815: fix spelling mistake: "Intterrupt" -> "Interrupt"
bpf: don't indicate success when copy_from_user fails
udp6: fix socket leak on early demux
net: thunderx: Fix BGX transmit stall due to underflow
Revert "vhost: cache used event for better performance"
team: use a larger struct for mac address
net: check dev->addr_len for dev_set_mac_address()
phy: bcm-ns-usb3: fix MDIO_BUS dependency
...
|
|
In 04df41e343db ("bpf: update tools/include/uapi/linux/bpf.h") the files
added in 40304b2a1567 ("bpf: BPF support for sock_ops") were added to
tools/include, but not in a verbatim way, missing the comments, which
ends up triggering this warning when build tools/perf/:
make: Entering directory '/home/acme/git/linux/tools/perf'
BUILD: Doing 'make -j4' parallel build
Warning: Kernel ABI header at 'tools/include/uapi/linux/bpf.h' differs from latest version at 'include/uapi/linux/bpf.h'
Make sure the the lines are equal, to fix the simple header copy
drift detector in tools/perf/.
Cc: Adrian Hunter <[email protected]>
Cc: Daniel Borkmann <[email protected]>
Cc: David Ahern <[email protected]>
Cc: David S. Miller <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Lawrence Brakmo <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Wang Nan <[email protected]>
Fixes: 04df41e343db ("bpf: update tools/include/uapi/linux/bpf.h")
Link: http://lkml.kernel.org/n/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
We copy headers from include/, arch/ to allow tools/ use defines,
structs from newer kernels and still be able to build on older systems.
We then, as part of a build, check if those copies got out of sync, when
we emit a warning, so that we can check if something needs to be
reflected on the tools, e.g. a 'perf trace' syscall argument beautifier
needs tweaking.
But we don't have to be super strict with that, for instance, extra
spaces, tabs or blank lines aren't problematic, so change
check-headers.sh to have "--ignore-blank-lines --ignore-space-change" as
default "diff" arguments.
Cc: Adrian Hunter <[email protected]>
Cc: David Ahern <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Wang Nan <[email protected]>
Link: http://lkml.kernel.org/n/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
So that we can build on older systems where otherwise we would end up
with:
CC /tmp/build/perf/trace/beauty/ioctl.o
trace/beauty/ioctl.c: In function 'ioctl__scnprintf_tty_cmd':
trace/beauty/ioctl.c:25:17: error: 'TIOCGEXCL' undeclared (first use in this function)
trace/beauty/ioctl.c:25:17: note: each undeclared identifier is reported only once for each function it appears in
trace/beauty/ioctl.c:25:2: error: array index in initializer not of integer type
trace/beauty/ioctl.c:25:2: error: (near initialization for 'ioctl_tty_cmd')
This way we can build a tool on an older system and it will still be
capable of processing perf.data files generated on newer systems.
Cc: Adrian Hunter <[email protected]>
Cc: David Ahern <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Wang Nan <[email protected]>
Link: http://lkml.kernel.org/n/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
In 2be7e212d541 ("bpf: add bpf_skb_adjust_room helper") BPF_ADJ_ROOM_NET was
added to include/uapi/linux/bpf.h but BPF_ADJ_ROOM_NET_OPS was added to
tools/include/uapi/linux/bpf.h, making these files differ, fix it by using the
same name in both, BPF_ADJ_ROOM_NET, the one in the kernel headers copy.
Cc: Adrian Hunter <[email protected]>
Cc: Daniel Borkmann <[email protected]>
Cc: David Ahern <[email protected]>
Cc: David S. Miller <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Wang Nan <[email protected]>
Fixes: 2be7e212d541 ("bpf: add bpf_skb_adjust_room helper")
Link: http://lkml.kernel.org/n/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
Sync up (copy) the following v4.13 kernel headers to the tooling headers:
arch/arm/include/uapi/asm/kvm.h:
arch/arm64/include/uapi/asm/kvm.h:
arch/powerpc/include/uapi/asm/kvm.h:
arch/s390/include/uapi/asm/kvm.h:
- KVM ABI extensions, which do not affect perf tooling
arch/x86/include/asm/cpufeatures.h:
arch/x86/include/asm/disabled-features.h:
- New PCID CPU feature on Intel CPUs - does not affect tooling.
I.e. no real changes were needed to resolve the build warnings, just a plain copy
of the latest kernel header version.
Signed-off-by: Ingo Molnar <[email protected]>
Cc: Adrian Hunter <[email protected]>
Cc: Alexander Shishkin <[email protected]>
Cc: Andi Kleen <[email protected]>
Cc: David Ahern <[email protected]>
Cc: David Carrillo-Cisneros <[email protected]>
Cc: Francis Deslauriers <[email protected]>
Cc: Geneviève Bastien <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Julien Desfossez <[email protected]>
Cc: Martin Liška <[email protected]>
Cc: Mathieu Desnoyers <[email protected]>
Cc: Milian Wolff <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Paul Turner <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Simon Que <[email protected]>
Cc: Stephane Eranian <[email protected]>
Cc: Taeung Song <[email protected]>
Cc: Wang Nan <[email protected]>
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|