aboutsummaryrefslogtreecommitdiff
path: root/tools
AgeCommit message (Collapse)AuthorFilesLines
2017-06-07selftests/ftrace: Return unsupported if it detects older kernelMasami Hiramatsu2-0/+18
Return unsupported if the kernel is too old to support instance independent ftrace filter for some testcases. Signed-off-by: Masami Hiramatsu <[email protected]> Signed-off-by: Shuah Khan <[email protected]>
2017-06-07selftests/ftrace: Use top-level available_filter_functionMasami Hiramatsu1-0/+4
Use top-level available_filter_function if the test case is running under an instance. Signed-off-by: Masami Hiramatsu <[email protected]> Signed-off-by: Shuah Khan <[email protected]>
2017-06-07selftests/ftrace: Add instance indication in test logMasami Hiramatsu1-1/+1
Add instance test indication in test log too. Current ftracetest shows instance test indication on the list of test, but not in the log for each test. This adds instance test indication on the top of each log, like below; execute (instance) : /ftrace/test.d/ftrace/func_set_ftrace_file.tc Signed-off-by: Masami Hiramatsu <[email protected]> Signed-off-by: Shuah Khan <[email protected]>
2017-06-07selftests/ftrace: Reset ftrace filter on older kernelMasami Hiramatsu1-1/+4
Since older kernel didn't support separated instance of set_ftrace_filter, if the test case set the filter in an instance, it will propagate to top-level instance. This means that the filter setting remains even if we remove the instance, and will cause other tests failure. To avoid this issue, reset the ftrace filter if we detect the propagation. Signed-off-by: Masami Hiramatsu <[email protected]> Signed-off-by: Shuah Khan <[email protected]>
2017-06-07ftrace/kprobes: selftests: Check kretprobe maxactive is supportedMasami Hiramatsu1-0/+1
Check the kretprobe maxactive is supported by kprobe_events interface. To ensure the kernel feature, this changes ftrace README to describe it. Signed-off-by: Masami Hiramatsu <[email protected]> Signed-off-by: Shuah Khan <[email protected]>
2017-06-07selftests/ftrace: Reduce trace buffer checking overheadMasami Hiramatsu1-2/+6
Current event/toplevel-enable.tc checking the trace buffer by dumping all events while recording events. However, this makes system very busy. To reduce this overhead comes from reading trace buffer and recording trace buffer, use head instead of cat and stop tracing while reading. Signed-off-by: Masami Hiramatsu <[email protected]> Signed-off-by: Shuah Khan <[email protected]>
2017-06-07selftests/ftrace: Skip full-glob-matching filter test on older kernelMasami Hiramatsu1-11/+17
Skip a part of ftrace filter test related to full-glob matching if we are sure that the testing kernel is so old that it does not support full-glob-matching yet. Signed-off-by: Masami Hiramatsu <[email protected]> Signed-off-by: Shuah Khan <[email protected]>
2017-06-07selftests/seccomp: Force rebuild according to dependenciesMickaël Salaün1-0/+2
Rebuild the seccomp tests when kselftest_harness.h is updated. Signed-off-by: Mickaël Salaün <[email protected]> Acked-by: Kees Cook <[email protected]> Cc: Andy Lutomirski <[email protected]> Cc: Shuah Khan <[email protected]> Cc: Will Drewry <[email protected]> Signed-off-by: Shuah Khan <[email protected]>
2017-06-07Documentation/dev-tools: Add kselftest_harness documentationMickaël Salaün1-85/+330
Add ReST metadata to kselftest_harness.h to be able to include the comments in the Sphinx documentation. Signed-off-by: Mickaël Salaün <[email protected]> Cc: Andy Lutomirski <[email protected]> Cc: Jonathan Corbet <[email protected]> Cc: Kees Cook <[email protected]> Cc: Shuah Khan <[email protected]> Cc: Will Drewry <[email protected]> Signed-off-by: Shuah Khan <[email protected]>
2017-06-07selftests: Remove the TEST_API() wrapper from kselftest_harness.hMickaël Salaün1-205/+150
Remove the TEST_API() wrapper to expose the underlying macro arguments to the documentation tools. Signed-off-by: Mickaël Salaün <[email protected]> Acked-by: Kees Cook <[email protected]> Cc: Andy Lutomirski <[email protected]> Cc: Jonathan Corbet <[email protected]> Cc: Kees Cook <[email protected]> Cc: Shuah Khan <[email protected]> Cc: Will Drewry <[email protected]> Signed-off-by: Shuah Khan <[email protected]>
2017-06-07selftests: Cosmetic renames in kselftest_harness.hMickaël Salaün1-5/+6
Keep the content consistent with the new name. Signed-off-by: Mickaël Salaün <[email protected]> Acked-by: Kees Cook <[email protected]> Cc: Andy Lutomirski <[email protected]> Cc: Shuah Khan <[email protected]> Cc: Will Drewry <[email protected]> Signed-off-by: Shuah Khan <[email protected]>
2017-06-07selftests: Make test_harness.h more generally availableMickaël Salaün2-1/+1
The seccomp/test_harness.h file contains useful helpers to build tests. Moving it to the selftest directory should benefit to other test components. Keep seccomp maintainers for this file. Signed-off-by: Mickaël Salaün <[email protected]> Acked-by: Kees Cook <[email protected]> Acked-by: Will Drewry <[email protected]> Cc: Andy Lutomirski <[email protected]> Cc: Shuah Khan <[email protected]> Link: https://lkml.kernel.org/r/CAGXu5j+8CVz8vL51DRYXqOY=xc3zuKFf=PTENe88XYHzFYidUQ@mail.gmail.com Signed-off-by: Shuah Khan <[email protected]>
2017-06-07selftests: sync: Skip the test if kernel support is not foundMichael Ellerman1-0/+13
The "Sync framework" test doesn't work if the kernel has no support, obviously. Rather than reporting a failure, check for the kernel support by looking for /sys/kernel/debug/sync/sw_sync, and if not found skip the test. Signed-off-by: Michael Ellerman <[email protected]> Reviewed-by: Gustavo Padovan <[email protected]> Signed-off-by: Shuah Khan <[email protected]>
2017-06-07selftests/vm: Fix test for virtual address range mapping for arm64Michal Suchanek1-9/+26
Arm64 has 256TB address space so fix the test to pass on Arm as well. Also remove unneeded numaif header. Signed-off-by: Michal Suchanek <[email protected]> Signed-off-by: Shuah Khan <[email protected]>
2017-06-07selftests: futex: print testcase-name and PASS/FAIL/ERROR statusNaresh Kamboju8-10/+19
Most of the tests under selftests follow a pattern for their results, which can then be parsed easily by other external tools easily. Though futex tests do print the test results very well, it doesn't really follow the general selftests pattern. This patch makes necessary changes to fix that. Output before this patch: futex_requeue_pi: Test requeue functionality Arguments: broadcast=0 locked=0 owner=0 timeout=0ns Result: PASS Output after this patch: futex_requeue_pi: Test requeue functionality Arguments: broadcast=0 locked=0 owner=0 timeout=0ns selftests: futex-requeue-pi [PASS] Signed-off-by: Naresh Kamboju <[email protected]> Signed-off-by: Shuah Khan <[email protected]>
2017-06-07Merge tag 'perf-urgent-for-mingo-4.12-20170606' of ↵Ingo Molnar13-22/+103
git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux into perf/urgent Pull perf/urgent fixes from Arnaldo Carvalho de Melo: - Only print NMI watchdog hint in 'perf stat' when it is enabled (Andi Kleen) - Fix sys_mmap/sys_old_mmap shandling in s390 in 'perf trace' (Jiri Olsa) - Disable breakpoint signal tests in powerpc, that lacks the perf kernel glue to set breakpoint events and makes 'perf test' always fail (Jiri Olsa) - Fix 'perf annotate' for branch instruction with multiple operands (Kim Phillips) - Add missing powerpc triplet when disassembling with 'objdump' in 'perf annotate' (Kim Phillips) - Do not trow away partial unwound stacks when using libdw, making callchains produced with it similar to those produced when linked with the other DWARF unwind library supported in perf, libunwind (Milian Wolff) - Fixes to properly handle kernel modules when processing build-id meta events (Namhyung Kim) - Fix handling of compressed modules in the build-id cache (Namhyung Kim) - Fix 'perf annotate' failure when filename has special chars (Ravi Bangoria) Signed-off-by: Arnaldo Carvalho de Melo <[email protected]> Signed-off-by: Ingo Molnar <[email protected]>
2017-06-07ACPI: Switch to use generic guid_t in acpi_evaluate_dsm()Andy Shevchenko3-5/+7
acpi_evaluate_dsm() and friends take a pointer to a raw buffer of 16 bytes. Instead we convert them to use guid_t type. At the same time we convert current users. acpi_str_to_uuid() becomes useless after the conversion and it's safe to get rid of it. Acked-by: Rafael J. Wysocki <[email protected]> Cc: Borislav Petkov <[email protected]> Acked-by: Dan Williams <[email protected]> Cc: Amir Goldstein <[email protected]> Reviewed-by: Jarkko Sakkinen <[email protected]> Reviewed-by: Jani Nikula <[email protected]> Acked-by: Jani Nikula <[email protected]> Cc: Ben Skeggs <[email protected]> Acked-by: Benjamin Tissoires <[email protected]> Acked-by: Joerg Roedel <[email protected]> Acked-by: Adrian Hunter <[email protected]> Cc: Yisen Zhuang <[email protected]> Acked-by: Bjorn Helgaas <[email protected]> Acked-by: Felipe Balbi <[email protected]> Acked-by: Mathias Nyman <[email protected]> Reviewed-by: Heikki Krogerus <[email protected]> Acked-by: Mark Brown <[email protected]> Signed-off-by: Andy Shevchenko <[email protected]> Signed-off-by: Christoph Hellwig <[email protected]>
2017-06-06Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller20-48/+198
Just some simple overlapping changes in marvell PHY driver and the DSA core code. Signed-off-by: David S. Miller <[email protected]>
2017-06-06bpf: Test for bpf IDMartin KaFai Lau6-1/+341
Add test to exercise the bpf_prog/map id generation, bpf_(prog|map)_get_next_id(), bpf_(prog|map)_get_fd_by_id() and bpf_get_obj_info_by_fd(). Signed-off-by: Martin KaFai Lau <[email protected]> Acked-by: Alexei Starovoitov <[email protected]> Acked-by: Daniel Borkmann <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2017-06-06kbuild: simplify silent build (-s) detectionMasahiro Yamada2-14/+2
This allows to detect -s (--silent) option without checking GNU Make version. As commit e36aaea28972 ("kbuild: Fix silent builds with make-4") pointed out, GNU Make 4.x changed the way/order it presents the command line options into MAKEFLAGS. In Make 3.8x, 's' is always the first in a group of short options. The group may be prefixed with '-' in some cases. In Make 4.x, 's' is always the last in a group of short options. As commit e6ac89fabd03 ("kbuild: Correctly deal with make options which contain an 's'") addressed, we also need to deal with long options that contain 's', like --warn-undefined-variables. Test cases: [1] command line input: make --silent -> MAKEFLAGS for Make 3.8x: s -> MAKEFLAGS for Make 4.x : s [2] command line input: make -srR -> MAKEFLAGS for Make 3.8x: sRr -> MAKEFLAGS for Make 4.x : rRs [3] command line input: make -s -rR --warn-undefined-variables -> MAKEFLAGS for Make 3.8x: --warn-undefined-variables -sRr -> MAKEFLAGS for Make 4.x : rRs --warn-undefined-variables My idea to cater to all the cases more easily is to filter out long options (--%), then search 's' with $(findstring ...). This way will be more future-proof even if future versions of Make put 's' in the middle of the group. Signed-off-by: Masahiro Yamada <[email protected]>
2017-06-05perf report: Ensure the perf DSO mapping matches what libdw seesMilian Wolff1-0/+8
In some situations the libdw unwinder stopped working properly. I.e. with libunwind we see: ~~~~~ heaptrack_gui 2228 135073.400112: 641314 cycles: e8ed _dl_fixup (/usr/lib/ld-2.25.so) 15f06 _dl_runtime_resolve_sse_vex (/usr/lib/ld-2.25.so) ed94c KDynamicJobTracker::KDynamicJobTracker (/home/milian/projects/compiled/kf5/lib64/libKF5KIOWidgets.so.5.35.0) 608f3 _GLOBAL__sub_I_kdynamicjobtracker.cpp (/home/milian/projects/compiled/kf5/lib64/libKF5KIOWidgets.so.5.35.0) f199 call_init.part.0 (/usr/lib/ld-2.25.so) f2a5 _dl_init (/usr/lib/ld-2.25.so) db9 _dl_start_user (/usr/lib/ld-2.25.so) ~~~~~ But with libdw and without this patch this sample is not properly unwound: ~~~~~ heaptrack_gui 2228 135073.400112: 641314 cycles: e8ed _dl_fixup (/usr/lib/ld-2.25.so) 15f06 _dl_runtime_resolve_sse_vex (/usr/lib/ld-2.25.so) ed94c KDynamicJobTracker::KDynamicJobTracker (/home/milian/projects/compiled/kf5/lib64/libKF5KIOWidgets.so.5.35.0) ~~~~~ Debug output showed me that libdw found a module for the last frame address, but it thinks it belongs to /usr/lib/ld-2.25.so. This patch double-checks what libdw sees and what perf knows. If the mappings mismatch, we now report the elf known to perf. This fixes the situation above, and the libdw unwinder produces the same stack as libunwind. Signed-off-by: Milian Wolff <[email protected]> Cc: Jiri Olsa <[email protected]> Cc: Namhyung Kim <[email protected]> Link: http://lkml.kernel.org/r/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2017-06-05perf report: Include partial stacks unwound with libdwMilian Wolff1-1/+1
So far the whole stack was thrown away when any error occurred before the maximum stack depth was unwound. This is actually a very common scenario though. The stacks that got unwound so far are still interesting. This removes a large chunk of differences when comparing perf script output for libunwind and libdw perf unwinding. E.g. with libunwind: ~~~~~ heaptrack_gui 2228 135073.388524: 479408 cycles: ffffffff811749ed perf_iterate_ctx ([kernel.kallsyms]) ffffffff81181662 perf_event_mmap ([kernel.kallsyms]) ffffffff811cf5ed mmap_region ([kernel.kallsyms]) ffffffff811cfe6b do_mmap ([kernel.kallsyms]) ffffffff811b0dca vm_mmap_pgoff ([kernel.kallsyms]) ffffffff811cdb0c sys_mmap_pgoff ([kernel.kallsyms]) ffffffff81033acb sys_mmap ([kernel.kallsyms]) ffffffff81631d37 entry_SYSCALL_64_fastpath ([kernel.kallsyms]) 192ca mmap64 (/usr/lib/ld-2.25.so) 59a9 _dl_map_object_from_fd (/usr/lib/ld-2.25.so) 83d0 _dl_map_object (/usr/lib/ld-2.25.so) cda1 openaux (/usr/lib/ld-2.25.so) 1834f _dl_catch_error (/usr/lib/ld-2.25.so) cfe2 _dl_map_object_deps (/usr/lib/ld-2.25.so) 3481 dl_main (/usr/lib/ld-2.25.so) 17387 _dl_sysdep_start (/usr/lib/ld-2.25.so) 4d37 _dl_start (/usr/lib/ld-2.25.so) d87 _start (/usr/lib/ld-2.25.so) heaptrack_gui 2228 135073.388677: 611329 cycles: 1a3e0 strcmp (/usr/lib/ld-2.25.so) 82b2 _dl_map_object (/usr/lib/ld-2.25.so) cda1 openaux (/usr/lib/ld-2.25.so) 1834f _dl_catch_error (/usr/lib/ld-2.25.so) cfe2 _dl_map_object_deps (/usr/lib/ld-2.25.so) 3481 dl_main (/usr/lib/ld-2.25.so) 17387 _dl_sysdep_start (/usr/lib/ld-2.25.so) 4d37 _dl_start (/usr/lib/ld-2.25.so) d87 _start (/usr/lib/ld-2.25.so) ~~~~~ With libdw without this patch: ~~~~~ heaptrack_gui 2228 135073.388524: 479408 cycles: ffffffff811749ed perf_iterate_ctx ([kernel.kallsyms]) ffffffff81181662 perf_event_mmap ([kernel.kallsyms]) ffffffff811cf5ed mmap_region ([kernel.kallsyms]) ffffffff811cfe6b do_mmap ([kernel.kallsyms]) ffffffff811b0dca vm_mmap_pgoff ([kernel.kallsyms]) ffffffff811cdb0c sys_mmap_pgoff ([kernel.kallsyms]) ffffffff81033acb sys_mmap ([kernel.kallsyms]) ffffffff81631d37 entry_SYSCALL_64_fastpath ([kernel.kallsyms]) heaptrack_gui 2228 135073.388677: 611329 cycles: ~~~~~ With this patch applied, the libdw unwinder will produce the same output as the libunwind unwinder. Signed-off-by: Milian Wolff <[email protected]> Cc: Jiri Olsa <[email protected]> Cc: Namhyung Kim <[email protected]> Link: http://lkml.kernel.org/r/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2017-06-05perf annotate: Add missing powerpc tripletKim Phillips1-0/+1
On an Ubuntu xenial system, 'perf annotate' says to install powerpc objdump on a system that already has binutils-powerpc-linux-gnu installed. Make perf aware of the missing triplet for the powerpc-linux-gnu target. Signed-off-by: Kim Phillips <[email protected]> Cc: Alexander Shishkin <[email protected]> Cc: He Kuang <[email protected]> Cc: Jiri Olsa <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: Ravi Bangoria <[email protected]> Link: http://lkml.kernel.org/r/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2017-06-05perf test: Disable breakpoint signal tests for powerpcJiri Olsa3-0/+24
The following tests are failing on powerpc: # perf test break 18: Breakpoint overflow signal handler : FAILED! 19: Breakpoint overflow sampling : FAILED! The powerpc kenel so far does not have support to even create instruction breakpoints using the perf event interface, so those tests fail early in the config phase. I added a '->is_supported()' callback to test struct to be able to disable specific tests. It seems better than putting ifdefs directly to the test array. Signed-off-by: Jiri Olsa <[email protected]> Cc: David Ahern <[email protected]> Cc: Namhyung Kim <[email protected]> Cc: Peter Zijlstra <[email protected]> Link: http://lkml.kernel.org/r/20170601205450.GA398@krava Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2017-06-05perf symbols: Use correct filename for compressed modules in build-id cacheNamhyung Kim1-4/+1
The decompress_kmodule() decompresses kernel modules in order to load symbols from it. In the DSO_BINARY_TYPE__BUILD_ID_CACHE case, it needs the full file path to extract the file extension to determine the decompression method. But overwriting 'name' will fail the decompression since it might point to a non-existing old file. Instead, use dso->long_name for having the correct extension and use the real filename to decompress. In the DSO_BINARY_TYPE__SYSTEM_PATH_KMODULE_COMP case, both names should be the same. This allows resolving symbols in the old modules. Before: $ perf report -i perf.data.old | grep scsi_mod 0.00% cc1 [scsi_mod] [k] 0x0000000000004aa6 0.00% as [scsi_mod] [k] 0x00000000000099e1 0.00% cc1 [scsi_mod] [k] 0x0000000000009830 0.00% cc1 [scsi_mod] [k] 0x0000000000001b8f After: 0.00% cc1 [scsi_mod] [k] scsi_handle_queue_ramp_up 0.00% as [scsi_mod] [k] scsi_sg_alloc 0.00% cc1 [scsi_mod] [k] scsi_setup_cmnd 0.00% cc1 [scsi_mod] [k] scsi_get_command Signed-off-by: Namhyung Kim <[email protected]> Acked-by: Jiri Olsa <[email protected]> Cc: Andi Kleen <[email protected]> Cc: David Ahern <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: [email protected] Link: http://lkml.kernel.org/r/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2017-06-05perf symbols: Set module info when build-id event foundNamhyung Kim4-11/+20
Like machine__findnew_module_dso(), it should set necessary info for kernel modules to find symbol info from the file. Factor out dso__set_module_info() to do it. This is needed for dso__needs_decompress() to detect such DSOs. Signed-off-by: Namhyung Kim <[email protected]> Acked-by: Jiri Olsa <[email protected]> Cc: Andi Kleen <[email protected]> Cc: David Ahern <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: [email protected] Link: http://lkml.kernel.org/r/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2017-06-05perf header: Set proper module name when build-id event foundNamhyung Kim1-2/+10
When perf processes build-id event, it creates DSOs with the build-id. But it didn't set the module short name (like '[module-name]') so when processing a kernel mmap event of the module, it cannot found the DSO as it only checks the short names. That leads for perf to create a same DSO without the build-id info and it'll lookup the system path even if the DSO is already in the build-id cache. After kernel was updated, perf cannot find the DSO and cannot show symbols in it anymore. You can see this if you have an old data file (w/ old kernel version): $ perf report -i perf.data.old -v |& grep scsi_mod build id event received for /lib/modules/3.19.2-1-ARCH/kernel/drivers/scsi/scsi_mod.ko.gz : cafe1ce6ca13a98a5d9ed3425cde249e57a27fc1 Failed to open /lib/modules/3.19.2-1-ARCH/kernel/drivers/scsi/scsi_mod.ko.gz, continuing without symbols ... The second message didn't show the build-id. With this patch: $ perf report -i perf.data.old -v |& grep scsi_mod build id event received for /lib/modules/3.19.2-1-ARCH/kernel/drivers/scsi/scsi_mod.ko.gz: cafe1ce6ca13a98a5d9ed3425cde249e57a27fc1 /lib/modules/3.19.2-1-ARCH/kernel/drivers/scsi/scsi_mod.ko.gz with build id cafe1ce6ca13a98a5d9ed3425cde249e57a27fc1 not found, continuing without symbols ... Now it shows the build-id but still cannot load the symbol table. This is a different problem which will be fixed in the next patch. Signed-off-by: Namhyung Kim <[email protected]> Acked-by: Jiri Olsa <[email protected]> Cc: Andi Kleen <[email protected]> Cc: David Ahern <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: [email protected] Link: http://lkml.kernel.org/r/[email protected] [ Fix the build on older compilers (debian <= 8, fedora <= 21, etc) wrt kmod_path var init ] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2017-06-05tools/lib/lockdep: Remove private kernel headersLevin, Alexander (Sasha Levin)49-158/+103
Move to using tools/include/ instead. Signed-off-by: Sasha Levin <[email protected]> Cc: Linus Torvalds <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: Thomas Gleixner <[email protected]> Cc: [email protected] Link: http://lkml.kernel.org/r/[email protected] Signed-off-by: Ingo Molnar <[email protected]>
2017-06-05tools/lib/lockdep: Hide liblockdep output from test resultsLevin, Alexander (Sasha Levin)1-2/+2
This would prevent the liblockdep error messages from getting mixed in with the test result output. Signed-off-by: Sasha Levin <[email protected]> Cc: Linus Torvalds <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: Thomas Gleixner <[email protected]> Cc: [email protected] Cc: [email protected] Link: http://lkml.kernel.org/r/[email protected] Signed-off-by: Ingo Molnar <[email protected]>
2017-06-05tools/lib/lockdep: Add dummy current_gfp_context()Levin, Alexander (Sasha Levin)1-0/+3
Signed-off-by: Sasha Levin <[email protected]> Cc: Linus Torvalds <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: Thomas Gleixner <[email protected]> Cc: [email protected] Cc: [email protected] Link: http://lkml.kernel.org/r/[email protected] Signed-off-by: Ingo Molnar <[email protected]>
2017-06-05tools/include: Add IS_ERR_OR_NULL to err.hLevin, Alexander (Sasha Levin)1-0/+5
Signed-off-by: Sasha Levin <[email protected]> Cc: Linus Torvalds <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: Thomas Gleixner <[email protected]> Cc: [email protected] Cc: [email protected] Link: http://lkml.kernel.org/r/[email protected] Signed-off-by: Ingo Molnar <[email protected]>
2017-06-05tools/lib/lockdep: Add empty __is_[module,kernel]_percpu_addressLevin, Alexander (Sasha Levin)2-0/+10
This would fix the build error caused by: 383776fa7 ("locking/lockdep: Handle statically initialized PER_CPU locks properly") Signed-off-by: Sasha Levin <[email protected]> Cc: Linus Torvalds <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: Thomas Gleixner <[email protected]> Cc: [email protected] Cc: [email protected] Link: http://lkml.kernel.org/r/[email protected] Signed-off-by: Ingo Molnar <[email protected]>
2017-06-05tools/lib/lockdep: Include err.hLevin, Alexander (Sasha Levin)1-0/+1
This provides PTR_ERR() now used by lockdep. Signed-off-by: Sasha Levin <[email protected]> Cc: Linus Torvalds <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: Thomas Gleixner <[email protected]> Cc: [email protected] Cc: [email protected] Link: http://lkml.kernel.org/r/[email protected] Signed-off-by: Ingo Molnar <[email protected]>
2017-06-05tools/include: Add (mostly) empty include/linux/sched/mm.hLevin, Alexander (Sasha Levin)1-0/+4
Now required by liblockdep. Signed-off-by: Sasha Levin <[email protected]> [ Added header guard. ] Cc: Linus Torvalds <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: Thomas Gleixner <[email protected]> Cc: [email protected] Cc: [email protected] Link: http://lkml.kernel.org/r/[email protected] Signed-off-by: Ingo Molnar <[email protected]>
2017-06-05tools/lib/lockdep: Use LDFLAGSBen Hutchings1-1/+1
Signed-off-by: Ben Hutchings <[email protected]> Signed-off-by: Sasha Levin <[email protected]> Cc: Linus Torvalds <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: Thomas Gleixner <[email protected]> Cc: [email protected] Link: http://lkml.kernel.org/r/[email protected] Signed-off-by: Ingo Molnar <[email protected]>
2017-06-05tools/lib/lockdep: Remove double-quotes from sonameBen Hutchings1-1/+1
Signed-off-by: Ben Hutchings <[email protected]> Signed-off-by: Sasha Levin <[email protected]> Cc: Linus Torvalds <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: Thomas Gleixner <[email protected]> Cc: [email protected] Link: http://lkml.kernel.org/r/[email protected] Signed-off-by: Ingo Molnar <[email protected]>
2017-06-05tools/lib/lockdep: Fix object file paths used in an out-of-tree buildBen Hutchings1-4/+4
Signed-off-by: Ben Hutchings <[email protected]> Signed-off-by: Sasha Levin <[email protected]> Cc: Linus Torvalds <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: Thomas Gleixner <[email protected]> Cc: [email protected] Link: http://lkml.kernel.org/r/[email protected] Signed-off-by: Ingo Molnar <[email protected]>
2017-06-05tools/lib/lockdep: Fix compilation for 4.11Levin, Alexander (Sasha Levin)7-3/+237
- More rcu stubs - New dummy headers due to sched header split - jhash2 included in due to kernel lockdep inclusion and usage Signed-off-by: Sasha Levin <[email protected]> Cc: Linus Torvalds <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: Thomas Gleixner <[email protected]> Cc: [email protected] Cc: [email protected] Link: http://lkml.kernel.org/r/[email protected] Signed-off-by: Ingo Molnar <[email protected]>
2017-06-05tools/lib/lockdep: Don't mix fd-based and stream IOAlexander Sverdlin3-3/+6
Mixing fd-based and stream-base IO results in interleaved output like following: ===================================== liblockdep 4.7.6 ------------------------------------- conopal/372 is trying to release lock (0x3a45c) at: /lib/libpt.so.2.17-alpha2(_ZN11PTimedMutex6SignalEv+0x3c) [0xb613c688] but there are no more locks to release! other info that might help us debug this: no locks held by conopal/372. stack backtrace: ===================================== liblockdep 4.7.6 ---------------------------------/usr/lib/liblockdep.so.4.7.6(+0x1e3c)[0xb67c2e3c] /usr/lib/liblockdep.so.4.7.6(+0x5fe0)[0xb67c6fe0] /usr/lib/liblockdep.so.4.7.6(+0x6450)[0xb67c7450] /usr/lib/liblockdep.so.4.7.6(lock_release+0x5c)[0xb67c7c40] /usr/lib/liblockdep.so.4.7.6(pthread_mutex_unlock+0x38)[0xb67c91d4] /lib/libpt.so.2.17-alpha2(_ZN11PTimedMutex6SignalEv+0x3c)[0xb613c688] /lib/libpt.so.2.17-alpha2(_ZN10PContainer14AssignContentsERKS_+0xe4)[0xb6160730] /lib/libopal.so.3.17-alpha2(_ZN15OpalMediaFormat14AssignContentsERK10PContainer+0x90)[0xb6435edc] /lib/libopal.so.3.17-alpha2(_ZN15OpalMediaFormataSERK7PString+0x68)[0xb643b610] /lib/libopal.so.3.17-alpha2(_ZN15OpalMediaFormatC2EPKc+0x68)[0xb643b6cc] /lib/libopal.so.3.17-alpha2(_ZN11OpalWAVFile14AddMediaFormatERK15OpalMediaFormat+0x330)[0xb66b2224] /lib/libopal.so.3.17-alpha2(+0x2526f8)[0xb640c6f8] /lib/ld-linux-armhf.so.3(+0x102f0)[0xb6f852f0] /lib/ld-linux-armhf.so.3(+0x1044c)[0xb6f8544c] /lib/ld-linux-armhf.so.3(+0xac4)[0xb6f75ac4] /usr/lib/liblockdep.so.4.7.6(+0x1e3c)[0xb67c2e3c] /usr/lib/liblockdep.so.4.7.6(+0x5fe0)[0xb67c6fe0] /usr/lib/liblockdep.so.4.7.6(+0x6450)[0xb67c7450] /usr/lib/liblockdep.so.4.7.6(lock_release+0x5c)[0xb67c7c40] /usr/lib/liblockdep.so.4.7.6(pthread_mutex_unlock+0x38)[0xb67c91d4] /lib/libpt.so.2.17-alpha2(_ZN11PTimedMutex6SignalEv+0x3c)[0xb613c688] /lib/libopal.so.3.17-alpha2(_ZN15OpalMediaFormat14AssignContentsERK10PContainer+0x78)[0xb6435ec4] /lib/libopal.so.3.17-alpha2(_ZN15OpalMediaFormataSERK7PString+0x68)[0xb643b610] /lib/libopal.so.3.17-alpha2(_ZN15OpalMediaFormatC2EPKc+0x68)[0xb643b6cc] /lib/libopal.so.3.17-alpha2(_ZN11OpalWAVFile14AddMediaFormatERK15OpalMediaFormat+0x330)[0xb66b2224] /lib/libopal.so.3.17-alpha2(+0x2526f8)[0xb640c6f8] /lib/ld-linux-armhf.so.3(+0x102f0)[0xb6f852f0] /lib/ld-linux-armhf.so.3(+0x1044c)[0xb6f8544c] /lib/ld-linux-armhf.so.3(+0xac4)[0xb6f75ac4] Therefore change all bare printf(...) to dprintf(STDOUT_FILENO, ...) to sychronize with backtrace_symbols_fd(). [ BUG: bad unlock balance detected! ] Signed-off-by: Alexander Sverdlin <[email protected]> Signed-off-by: Sasha Levin <[email protected]> Cc: Linus Torvalds <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: Sasha Levin <[email protected]> Cc: Thomas Gleixner <[email protected]> Cc: [email protected] Cc: [email protected] Link: http://lkml.kernel.org/r/[email protected] Signed-off-by: Ingo Molnar <[email protected]>
2017-06-05tools: Add install make target for liblockdepAlexander Sverdlin1-2/+6
Allow user to call "liblockdep_install" target. Also add liblockdep to "all" and "install" targets (as "help" command suggests). Signed-off-by: Alexander Sverdlin <[email protected]> Signed-off-by: Sasha Levin <[email protected]> Cc: Arnaldo Carvalho de Melo <[email protected]> Cc: Linus Torvalds <[email protected]> Cc: Linus Walleij <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: Thomas Gleixner <[email protected]> Cc: [email protected] Cc: [email protected] Link: http://lkml.kernel.org/r/[email protected] Signed-off-by: Ingo Molnar <[email protected]>
2017-06-05tools/lib/lockdep: Remove -lpthread compiler optionVishal Thanki1-2/+2
With -lpthread option, the test for ABBA_2threads was failing, and test passed if it was removed. Since -pthread compiler option is sufficient for linking to pthread libraries, this patch removes -lpthread. Signed-off-by: Vishal Thanki <[email protected]> Signed-off-by: Sasha Levin <[email protected]> Cc: Linus Torvalds <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: Thomas Gleixner <[email protected]> Cc: [email protected] Cc: [email protected] Link: http://lkml.kernel.org/r/[email protected] Signed-off-by: Ingo Molnar <[email protected]>
2017-06-05tools/lib/lockdep: Fix 'defined but not used' warning for init_utsname()Ben Hutchings2-10/+10
We define init_utsname() as static but not inline, resulting in a warning for every source file that includes lockdep.h but doesn't call it. Since it is only used by lockdep.c, define it in there. Signed-off-by: Ben Hutchings <[email protected]> Signed-off-by: Sasha Levin <[email protected]> Cc: Linus Torvalds <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: Thomas Gleixner <[email protected]> Cc: [email protected] Link: http://lkml.kernel.org/r/[email protected] Signed-off-by: Ingo Molnar <[email protected]>
2017-06-05tools/lib/lockdep: Fix 'set but not used' warningsBen Hutchings1-4/+4
liblockdep defines trivial macros for working with interrupt flags, as interrupts are never disabled in userland. This results in warnings from gcc when -Wunused-but-set-variable is enabled, and it is enabled by -Wall. Fix this by evaluating the flags parameter and casting it to void. Signed-off-by: Ben Hutchings <[email protected]> Signed-off-by: Sasha Levin <[email protected]> Cc: Linus Torvalds <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: Thomas Gleixner <[email protected]> Cc: [email protected] Link: http://lkml.kernel.org/r/[email protected] Signed-off-by: Ingo Molnar <[email protected]>
2017-06-05tools/lib/lockdep: Fix 'unused value' warningsBen Hutchings3-5/+15
liblockdep defines various macros that may expand to an expression with no effect, while the in-kernel definition does have an effect. This results in warnings from gcc when -Wunused-value is enabled, and is is enabled by -Wall. Fix this by introducing trivial functions, as function return values are generally allowed to be ignored. Signed-off-by: Ben Hutchings <[email protected]> Signed-off-by: Sasha Levin <[email protected]> Cc: Linus Torvalds <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: Thomas Gleixner <[email protected]> Cc: [email protected] Link: http://lkml.kernel.org/r/[email protected] Signed-off-by: Ingo Molnar <[email protected]>
2017-06-05tools/lib/lockdep: Enable -Wall by defaultBen Hutchings1-0/+1
Regressions in liblockdep may be missed because it doesn't enable warnings. Adding -Wall immediately introduces a lot of warnings, but those will be fixed by the following commits. Signed-off-by: Ben Hutchings <[email protected]> Signed-off-by: Sasha Levin <[email protected]> Cc: Linus Torvalds <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: Thomas Gleixner <[email protected]> Cc: [email protected] Link: http://lkml.kernel.org/r/[email protected] Signed-off-by: Ingo Molnar <[email protected]>
2017-06-05tools/lib/lockdep: Define the ARRAY_SIZE() macroBen Hutchings1-0/+2
lockdep.c now uses ARRAY_SIZE(). Signed-off-by: Ben Hutchings <[email protected]> Signed-off-by: Sasha Levin <[email protected]> Cc: Linus Torvalds <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: Thomas Gleixner <[email protected]> Cc: [email protected] Fixes: 75dd602a5198 ("lockdep: Fix lock_chain::base size") Link: http://lkml.kernel.org/r/[email protected] Signed-off-by: Ingo Molnar <[email protected]>
2017-06-05tools/lib/lockdep: Reduce MAX_LOCK_DEPTH to avoid overflowing lock_chain/: DepthBen Hutchings1-1/+1
liblockdep has been broken since commit 75dd602a5198 ("lockdep: Fix lock_chain::base size"), as that adds a check that MAX_LOCK_DEPTH is within the range of lock_chain::depth and in liblockdep it is much too large. That should have resulted in a compiler error, but didn't because: - the check uses ARRAY_SIZE(), which isn't yet defined in liblockdep so is assumed to be an (undeclared) function - putting a function call inside a BUILD_BUG_ON() expression quietly turns it into some nonsense involving a variable-length array It did produce a compiler warning, but I didn't notice because liblockdep already produces too many warnings if -Wall is enabled (which I'll fix shortly). Even before that commit, which reduced lock_chain::depth from 8 bits to 6, MAX_LOCK_DEPTH was too large. Signed-off-by: Ben Hutchings <[email protected]> Signed-off-by: Sasha Levin <[email protected]> Cc: <[email protected]> # for versions before 4.6, use a value of 255 Cc: Linus Torvalds <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: Thomas Gleixner <[email protected]> Cc: [email protected] Link: http://lkml.kernel.org/r/[email protected] Signed-off-by: Ingo Molnar <[email protected]>
2017-06-05tools/lib/lockdep: Fix undefined symbol prandom_u32Ben Hutchings1-0/+7
__lock_pin_lock() now calls prandom_u32() which is not defined in liblockdep. __lock_pin_lock() and its caller lock_pin_lock() are dead code in liblockdep, but we still need to provide a definition of prandom_u32() in case lazy binding is disabled. Signed-off-by: Ben Hutchings <[email protected]> Signed-off-by: Sasha Levin <[email protected]> Cc: Linus Torvalds <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: Thomas Gleixner <[email protected]> Cc: [email protected] Fixes: e7904a28f533 ("locking/lockdep, sched/core: Implement a better ...") Link: http://lkml.kernel.org/r/[email protected] Signed-off-by: Ingo Molnar <[email protected]>
2017-06-05selftests/powerpc: context_switch use private futexes with threadsNicholas Piggin1-20/+33
This reduces overhead of mutex locking and increases context switch rate significantly (which helps to measure and profile the context switch path). Signed-off-by: Nicholas Piggin <[email protected]> Signed-off-by: Michael Ellerman <[email protected]>
2017-06-04bpf: update perf event helper functions documentationTeng Qin1-4/+7
This commit updates documentation of the bpf_perf_event_output and bpf_perf_event_read helpers to match their implementation. Signed-off-by: Teng Qin <[email protected]> Signed-off-by: Alexei Starovoitov <[email protected]> Signed-off-by: David S. Miller <[email protected]>
Powered by cgit, Gruvboxed by Blaster4385.