aboutsummaryrefslogtreecommitdiff
path: root/tools
AgeCommit message (Collapse)AuthorFilesLines
2022-03-01KVM: selftests: Add test to verify KVM handling of ICRSean Christopherson4-0/+153
The main thing that the selftest verifies is that KVM copies x2APIC's ICR[63:32] to/from ICR2 when userspace accesses the vAPIC page via KVM_{G,S}ET_LAPIC. KVM previously split x2APIC ICR to ICR+ICR2 at the time of write (from the guest), and so KVM must preserve that behavior for backwards compatibility between different versions of KVM. It will also test other invariants, e.g. that KVM clears the BUSY flag on ICR writes, that the reserved bits in ICR2 are dropped on writes from the guest, etc... Signed-off-by: Sean Christopherson <[email protected]> Message-Id: <[email protected]> Signed-off-by: Paolo Bonzini <[email protected]>
2022-03-01selftests/bpf: Update btf_dump case for conflicting namesXu Kuohai1-13/+41
Update btf_dump case for conflicting names caused by forward declaration. Signed-off-by: Xu Kuohai <[email protected]> Signed-off-by: Daniel Borkmann <[email protected]> Acked-by: Song Liu <[email protected]> Link: https://lore.kernel.org/bpf/[email protected]
2022-03-01selftests/powerpc/pmu: Add interface test for mmcra register fieldsKajol Jain3-1/+82
The testcase uses event code 0x35340401e0 to verify the settings for different fields in Monitor Mode Control Register A (MMCRA). The fields include thresh_start, thresh_stop thresh_select, sdar mode, sample and marked bit. Checks if these fields are translated correctly via perf interface to MMCRA. Signed-off-by: Kajol Jain <[email protected]> [mpe: Add error checking, drop GET_MMCR_FIELD, add to .gitignore] Signed-off-by: Michael Ellerman <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2022-03-01libbpf: Skip forward declaration when counting duplicated type namesXu Kuohai1-0/+5
Currently if a declaration appears in the BTF before the definition, the definition is dumped as a conflicting name, e.g.: $ bpftool btf dump file vmlinux format raw | grep "'unix_sock'" [81287] FWD 'unix_sock' fwd_kind=struct [89336] STRUCT 'unix_sock' size=1024 vlen=14 $ bpftool btf dump file vmlinux format c | grep "struct unix_sock" struct unix_sock; struct unix_sock___2 { <--- conflict, the "___2" is unexpected struct unix_sock___2 *unix_sk; This causes a compilation error if the dump output is used as a header file. Fix it by skipping declaration when counting duplicated type names. Fixes: 351131b51c7a ("libbpf: add btf_dump API for BTF-to-C conversion") Signed-off-by: Xu Kuohai <[email protected]> Signed-off-by: Daniel Borkmann <[email protected]> Acked-by: Song Liu <[email protected]> Link: https://lore.kernel.org/bpf/[email protected]
2022-03-01selftests/powerpc/pmu/: Add interface test for mmcr3_src fieldsKajol Jain3-1/+70
The testcase uses event code 0x1340000001c040 to verify the settings for different src fields in Monitor Mode Control Register 3 (MMCR3). Checks if these fields are translated correctly via perf interface to MMCR3 on ISA v3.1 platform. Signed-off-by: Kajol Jain <[email protected]> [mpe: Add error checking, drop GET_MMCR_FIELD, add to .gitignore] Signed-off-by: Michael Ellerman <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2022-03-01selftests/powerpc/pmu/: Add interface test for mmcr2_fcs_fch fieldsMadhavan Srinivasan3-1/+87
The testcases uses cycles event to verify the freeze counter settings in Monitor Mode Control Register 2 (MMCR2). Event modifier (exclude_kernel) setting is used for the event attribute to check the FCxS and FCxH ( Freeze counter in privileged and hypervisor state ) settings via perf interface. Signed-off-by: Madhavan Srinivasan <[email protected]> [mpe: Add error checking, check MSR for MSR_HV, drop GET_MMCR_FIELD, add to .gitignore] Signed-off-by: Michael Ellerman <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2022-03-01selftests/powerpc/pmu/: Add interface test for mmcr2_l2l3 fieldMadhavan Srinivasan3-1/+76
The testcases uses event code 0x010000046080 to verify the l2l3 bit setting for Monitor Mode Control Register 2 (MMCR2). check if this bit is set correctly via perf interface in ISA v3.1 platform. Signed-off-by: Madhavan Srinivasan <[email protected]> [mpe: Add error checking, drop GET_MMCR_FIELD, add to .gitignore] Signed-off-by: Michael Ellerman <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2022-03-01selftests/powerpc/pmu/: Add interface test for mmcr1_comb fieldAthira Rajeev3-1/+69
The testcase uses event code "0x26880" to verify the settings for different fields in Monitor Mode Control Register 1 (MMCR1). The field include PMCxCOMB. Checks if this field are translated correctly via perf interface to MMCR1 Add selftest for mmcr1 comb field. Signed-off-by: Athira Rajeev <[email protected]> [mpe: Add error checking, drop GET_MMCR_FIELD, add to .gitignore] Signed-off-by: Michael Ellerman <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2022-03-01selftests/powerpc/pmu/: Add interface test for mmcr0_pmc56 using pmc5Athira Rajeev3-1/+60
The testcase uses event code 0x500fa to verify the FC5-6 bit setting in Monitor Mode Control Register 0 (MMCR0). Check if FC5-6 bit is not set in MMCR0 when using Performance Monitor Counter 5 and 6 (PMC5 and PMC6). Signed-off-by: Athira Rajeev <[email protected]> [mpe: Add error checking, drop GET_MMCR_FIELD, add to .gitignore] Signed-off-by: Michael Ellerman <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2022-03-01selftests/powerpc/pmu/: Add interface test for mmcr0_fc56 field using pmc1Athira Rajeev3-1/+61
The testcase uses event code 0x1001e to verify two bit settings (FC5-6 and PMC1CE) in Monitor Mode Control Register 0 (MMCR0). Check if FC5-6 bit to be set in MMCR0 when not using Performance Monitor Counter 5 and 6 (PMC5 and PMC6). And also PMC1CE is expected to be set when using PMC1. Test if these fields are programmed correctly via perf interface. Signed-off-by: Athira Rajeev <[email protected]> [mpe: Add error checking, drop GET_MMCR_FIELD, add to .gitignore] Signed-off-by: Michael Ellerman <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2022-03-01selftests/powerpc/pmu/: Add interface test for mmcr0_pmcjce fieldAthira Rajeev3-1/+61
The testcase uses event code 0x500fa ("instructions") to verify the PMCjCE bit setting in Monitor Mode Control Register 0 (MMCR0). This bit is expected to be set in MMCR0 when using Performance Monitor Counter 5 (PMC5). Checks if perf interface sets this bit correctly. Signed-off-by: Athira Rajeev <[email protected]> [mpe: Add error checking, drop GET_MMCR_FIELD, add to .gitignore] Signed-off-by: Michael Ellerman <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2022-03-01selftests/powerpc/pmu/: Add interface test for mmcr0_pmccext bitAthira Rajeev3-1/+61
The testcase uses cycles event to check the PMCCEXT bit setting in Monitor Mode Control Register 0 (MMCR0). Check if perf interface sets this control bit in MMCR0 on ISA v3.1 platform. Signed-off-by: Athira Rajeev <[email protected]> [mpe: Add error checking, drop GET_MMCR_FIELD, add to .gitignore] Signed-off-by: Michael Ellerman <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2022-03-01selftests/powerpc/pmu/: Add interface test for mmcr0_cc56run fieldAthira Rajeev3-1/+61
The testcase uses event code 0x500fa ("instructions") to check the CC56RUN bit setting in Monitor Mode Control Register 0(MMCR0). In ISA v3.1 platform, this bit is expected to be set in MMCR0 when using Performance Monitor Counter 5 and 6 (PMC5 and PMC6). Verify this is done correctly by perf interface. CC56RUN bit makes PMC5 and PMC6 count regardless of the run latch state. This bit is set in power10 since PMC5 and PMC6 is used in power10 for counting instructions and cycles. Hence added a check to skip this test in other platforms Signed-off-by: Athira Rajeev <[email protected]> [mpe: Add error checking, drop GET_MMCR_FIELD, add to .gitignore] Signed-off-by: Michael Ellerman <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2022-03-01selftests/powerpc/pmu/: Add interface test for mmcr0 exception bitsAthira Rajeev3-1/+63
The testcase uses "instructions" event to verify two bits(PMAE and PMAO) in Monitor Mode Control Register 0 (MMCR0). At the time of interrupt, pmae bit ( which enables performance monitor exception ) is expected to be cleared and pmao (which indicates performance monitor alert) bit is expected to be set in MMCR0. And testcases handles these checks. Signed-off-by: Athira Rajeev <[email protected]> [mpe: Add error checking, drop GET_MMCR_FIELD, add to .gitignore] Signed-off-by: Michael Ellerman <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2022-03-01selftests/powerpc/pmu: Add macro to extract mmcr3 and mmcra fieldsKajol Jain1-0/+62
Add macro and utility functions to fetch individual fields from Monitor Mode Control Register 3(MMCR3)and Monitor Mode Control Register A(MMCRA) PMU registers Signed-off-by: Kajol Jain <[email protected]> Signed-off-by: Michael Ellerman <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2022-03-01selftests/powerpc/pmu: Add macro to extract mmcr0/mmcr1 fieldsAthira Rajeev1-0/+64
Add macro and utility functions to fetch individual fields from Monitor Mode Control Register 0(MMCR0) and Monitor Mode Control Register 1(MMCR1) PMU register. Signed-off-by: Athira Rajeev <[email protected]> Signed-off-by: Michael Ellerman <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2022-03-01selftests/powerpc/pmu: Add macros to extract mmcr fieldsMadhavan Srinivasan1-0/+52
Along with it, Add macros and utility functions to fetch individual fields from Monitor Mode Control Register 2(MMCR2) register. Signed-off-by: Madhavan Srinivasan <[email protected]> Signed-off-by: Michael Ellerman <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2022-03-01selftests/powerpc/pmu: Add event_init_sampling functionMadhavan Srinivasan2-1/+19
Extended event_init_opts() to include initialization of sampling testcases. Patch adds an event_init_sampling() wrapper to initialize event attribute fields for sampling events. This includes initializing sample period, sample type and event type. Signed-off-by: Madhavan Srinivasan <[email protected]> Signed-off-by: Michael Ellerman <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2022-03-01selftests/powerpc/pmu: Add utility functions to post process the mmap bufferKajol Jain2-0/+179
Add couple of basic utility functions to post process the mmap buffer. It includes function to read the total number of samples present in the mmap buffer and function to get the address of the first sample. Add function "get_intr_regs" which will return pointer to interrupt registers present in the sample, incase sample type PERF_SAMPLE_REGS_INTR is set. Add functions "get_reg_value" which can be used to read any interrupt register value from a given sample. Signed-off-by: Kajol Jain <[email protected]> Signed-off-by: Michael Ellerman <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2022-03-01selftests/powerpc/pmu: Add macros to parse event codesMadhavan Srinivasan4-2/+172
Each platform has raw event encoding format which specifies the bit positions for different fields. The fields from event code gets translated into performance monitoring mode control register (MMCRx) settings. Patch add macros to extract individual fields from the event code. Add functions for sanity checks, since testcases currently are only supported in power9 and power10. Signed-off-by: Madhavan Srinivasan <[email protected]> [mpe: Read PVR directly rather than using /proc/cpuinfo] Signed-off-by: Michael Ellerman <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2022-03-01selftests/powerpc/pmu: Add support for perf sampling testsAthira Rajeev4-2/+130
Add support functions for enabling perf sampling test in a new folder "sampling_tests" under "selftests/powerpc/pmu". This includes support functions for allocating and processing the mmap buffer. These functions are added/defined in "sampling_tests/misc.*" files. Also updates the corresponding Makefiles in "selftests/powerpc" and "sampling_tests" folder. Signed-off-by: Athira Rajeev <[email protected]> [mpe: Drop unneeded bits from the Makefile] Signed-off-by: Michael Ellerman <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2022-03-01selftests: netfilter: add nfqueue TCP_NEW_SYN_RECV socket race testFlorian Westphal4-1/+157
causes: BUG: KASAN: slab-out-of-bounds in sk_free+0x25/0x80 Write of size 4 at addr ffff888106df0284 by task nf-queue/1459 sk_free+0x25/0x80 nf_queue_entry_release_refs+0x143/0x1a0 nf_reinject+0x233/0x770 ... without 'netfilter: nf_queue: don't assume sk is full socket'. Signed-off-by: Florian Westphal <[email protected]>
2022-03-01selftests: add new tests for vxlan vnifilteringRoopa Prabhu1-0/+579
This patch adds a new test script test_vxlan_vnifiltering.sh with tests for vni filtering api, various datapath tests. Also has a test with a mix of traditional, metadata and vni filtering devices inuse at the same time. Signed-off-by: Roopa Prabhu <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2022-02-28libbpf: Fix BPF_MAP_TYPE_PERF_EVENT_ARRAY auto-pinningStijn Tintel1-19/+25
When a BPF map of type BPF_MAP_TYPE_PERF_EVENT_ARRAY doesn't have the max_entries parameter set, the map will be created with max_entries set to the number of available CPUs. When we try to reuse such a pinned map, map_is_reuse_compat will return false, as max_entries in the map definition differs from max_entries of the existing map, causing the following error: libbpf: couldn't reuse pinned map at '/sys/fs/bpf/m_logging': parameter mismatch Fix this by overwriting max_entries in the map definition. For this to work, we need to do this in bpf_object__create_maps, before calling bpf_object__reuse_map. Fixes: 57a00f41644f ("libbpf: Add auto-pinning of maps when loading BPF objects") Signed-off-by: Stijn Tintel <[email protected]> Signed-off-by: Daniel Borkmann <[email protected]> Acked-by: Song Liu <[email protected]> Link: https://lore.kernel.org/bpf/[email protected]
2022-02-28bpf, selftests: Use raw_tp program for atomic testHou Tao2-83/+36
Now atomic tests will attach fentry program and run it through bpf_prog_test_run_opts(), but attaching fentry program depends on BPF trampoline which is only available under x86-64. Considering many archs have atomic support, using raw_tp program instead. Signed-off-by: Hou Tao <[email protected]> Signed-off-by: Daniel Borkmann <[email protected]> Acked-by: Andrii Nakryiko <[email protected]> Link: https://lore.kernel.org/bpf/[email protected]
2022-02-28bpftool: Remove redundant slashesYuntao Wang1-7/+7
Because the OUTPUT variable ends with a slash but CURDIR doesn't, to keep the _OUTPUT value consistent, we add a trailing slash to CURDIR when defining _OUTPUT variable. Since the _OUTPUT variable holds a value ending with a trailing slash, there is no need to add another one when defining BOOTSTRAP_OUTPUT and LIBBPF_OUTPUT variables. Likewise, when defining LIBBPF_INCLUDE and LIBBPF_BOOTSTRAP_INCLUDE, we shouldn't add an extra slash either for the same reason. When building libbpf, the value of the DESTDIR argument should also not end with a trailing slash. Signed-off-by: Yuntao Wang <[email protected]> Signed-off-by: Daniel Borkmann <[email protected]> Reviewed-by: Quentin Monnet <[email protected]> Link: https://lore.kernel.org/bpf/[email protected]
2022-02-28selftests/powerpc/pmu: Include mmap_buffer field as part of struct eventAthira Rajeev1-0/+5
To enable the capturing of samples as part of perf event, add a new field "mmap_buffer" to "struct event". This field is a place-holder for sample collection Signed-off-by: Athira Rajeev <[email protected]> Signed-off-by: Michael Ellerman <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2022-02-26Merge tag 'trace-v5.17-rc4' of ↵Linus Torvalds4-11/+12
git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace Pull tracing fixes from Steven Rostedt: - rtla (Real-Time Linux Analysis tool): - fix typo in man page - Update API -e to -E before it is released - Error message fix and memory leak fix - Partially uninline trace event soft disable to shrink text - Fix function graph start up test - Have triggers affect the trace instance they are in and not top level - Have osnoise sleep in the units it says it uses - Remove unused ftrace stub function - Remove event probe redundant info from event in the buffer - Fix group ownership setting in tracefs - Ensure trace buffer is minimum size to prevent crashes * tag 'trace-v5.17-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: rtla/osnoise: Fix error message when failing to enable trace instance rtla/osnoise: Free params at the exit rtla/hist: Make -E the short version of --entries tracing: Fix selftest config check for function graph start up test tracefs: Set the group ownership in apply_options() not parse_options() tracing/osnoise: Make osnoise_main to sleep for microseconds ftrace: Remove unused ftrace_startup_enable() stub tracing: Ensure trace buffer is at least 4096 bytes large tracing: Uninline trace_trigger_soft_disabled() partly eprobes: Remove redundant event type information tracing: Have traceon and traceoff trigger honor the instance tracing: Dump stacktrace trigger to the corresponding instance rtla: Fix systme -> system typo on man page
2022-02-26selftests/memfd: clean up mapping in mfd_fail_writeMike Kravetz1-0/+1
Running the memfd script ./run_hugetlbfs_test.sh will often end in error as follows: memfd-hugetlb: CREATE memfd-hugetlb: BASIC memfd-hugetlb: SEAL-WRITE memfd-hugetlb: SEAL-FUTURE-WRITE memfd-hugetlb: SEAL-SHRINK fallocate(ALLOC) failed: No space left on device ./run_hugetlbfs_test.sh: line 60: 166855 Aborted (core dumped) ./memfd_test hugetlbfs opening: ./mnt/memfd fuse: DONE If no hugetlb pages have been preallocated, run_hugetlbfs_test.sh will allocate 'just enough' pages to run the test. In the SEAL-FUTURE-WRITE test the mfd_fail_write routine maps the file, but does not unmap. As a result, two hugetlb pages remain reserved for the mapping. When the fallocate call in the SEAL-SHRINK test attempts allocate all hugetlb pages, it is short by the two reserved pages. Fix by making sure to unmap in mfd_fail_write. Link: https://lkml.kernel.org/r/[email protected] Signed-off-by: Mike Kravetz <[email protected]> Cc: Joel Fernandes <[email protected]> Cc: Shuah Khan <[email protected]> Signed-off-by: Andrew Morton <[email protected]> Signed-off-by: Linus Torvalds <[email protected]>
2022-02-26selftest/vm: fix map_fixed_noreplace test failureAneesh Kumar K.V1-12/+37
On the latest RHEL the test fails due to executable mapped at 256MB address # ./map_fixed_noreplace mmap() @ 0x10000000-0x10050000 p=0xffffffffffffffff result=File exists 10000000-10010000 r-xp 00000000 fd:04 34905657 /root/rpmbuild/BUILD/kernel-5.14.0-56.el9/linux-5.14.0-56.el9.ppc64le/tools/testing/selftests/vm/map_fixed_noreplace 10010000-10020000 r--p 00000000 fd:04 34905657 /root/rpmbuild/BUILD/kernel-5.14.0-56.el9/linux-5.14.0-56.el9.ppc64le/tools/testing/selftests/vm/map_fixed_noreplace 10020000-10030000 rw-p 00010000 fd:04 34905657 /root/rpmbuild/BUILD/kernel-5.14.0-56.el9/linux-5.14.0-56.el9.ppc64le/tools/testing/selftests/vm/map_fixed_noreplace 10029b90000-10029bc0000 rw-p 00000000 00:00 0 [heap] 7fffbb510000-7fffbb750000 r-xp 00000000 fd:04 24534 /usr/lib64/libc.so.6 7fffbb750000-7fffbb760000 r--p 00230000 fd:04 24534 /usr/lib64/libc.so.6 7fffbb760000-7fffbb770000 rw-p 00240000 fd:04 24534 /usr/lib64/libc.so.6 7fffbb780000-7fffbb7a0000 r--p 00000000 00:00 0 [vvar] 7fffbb7a0000-7fffbb7b0000 r-xp 00000000 00:00 0 [vdso] 7fffbb7b0000-7fffbb800000 r-xp 00000000 fd:04 24514 /usr/lib64/ld64.so.2 7fffbb800000-7fffbb810000 r--p 00040000 fd:04 24514 /usr/lib64/ld64.so.2 7fffbb810000-7fffbb820000 rw-p 00050000 fd:04 24514 /usr/lib64/ld64.so.2 7fffd93f0000-7fffd9420000 rw-p 00000000 00:00 0 [stack] Error: couldn't map the space we need for the test Fix this by finding a free address using mmap instead of hardcoding BASE_ADDRESS. Link: https://lkml.kernel.org/r/[email protected] Signed-off-by: Aneesh Kumar K.V <[email protected]> Cc: Michael Ellerman <[email protected]> Cc: Jann Horn <[email protected]> Cc: Shuah Khan <[email protected]> Signed-off-by: Andrew Morton <[email protected]> Signed-off-by: Linus Torvalds <[email protected]>
2022-02-25rtla/osnoise: Fix error message when failing to enable trace instanceDaniel Bristot de Oliveira1-1/+1
When a trace instance creation fails, tools are printing: Could not enable -> osnoiser <- tracer for tracing Print the actual (and correct) name of the tracer it fails to enable. Link: https://lkml.kernel.org/r/53ef0582605af91eca14b19dba9fc9febb95d4f9.1645206561.git.bristot@kernel.org Fixes: b1696371d865 ("rtla: Helper functions for rtla") Cc: Jonathan Corbet <[email protected]> Signed-off-by: Daniel Bristot de Oliveira <[email protected]> Signed-off-by: Steven Rostedt (Google) <[email protected]>
2022-02-25rtla/osnoise: Free params at the exitDaniel Bristot de Oliveira1-0/+1
The variable that stores the parsed command line arguments are not being free()d at the rtla osnoise top exit path. Free params variable before exiting. Link: https://lkml.kernel.org/r/0be31d8259c7c53b98a39769d60cfeecd8421785.1645206561.git.bristot@kernel.org Fixes: 1eceb2fc2ca5 ("rtla/osnoise: Add osnoise top mode") Cc: Jonathan Corbet <[email protected]> Signed-off-by: Daniel Bristot de Oliveira <[email protected]> Signed-off-by: Steven Rostedt (Google) <[email protected]>
2022-02-25rtla/hist: Make -E the short version of --entriesDaniel Bristot de Oliveira2-10/+10
Currently, --entries uses -e as the short version in the hist mode of timerlat and osnoise tools. But as -e is already used to enable events on trace sessions by other tools, thus let's keep it available for the same usage for all rtla tools. Make -E the short version of --entries for hist mode on all tools. Note: rtla was merged in this merge window, so rtla was not released yet. Link: https://lkml.kernel.org/r/5dbf0cbe7364d3a05e708926b41a097c59a02b1e.1645206561.git.bristot@kernel.org Cc: Jonathan Corbet <[email protected]> Signed-off-by: Daniel Bristot de Oliveira <[email protected]> Signed-off-by: Steven Rostedt (Google) <[email protected]>
2022-02-25selftests/rtc: continuously read RTC in a loop for 30sMateusz Jończyk2-1/+67
Some problems with reading the RTC time may happen rarely, for example while the RTC is updating. So read the RTC many times to catch these problems. For example, a previous attempt for my commit ea6fa4961aab ("rtc: mc146818-lib: fix RTC presence check") was incorrect and would have triggered this selftest. To avoid the risk of damaging the hardware, wait 11ms before consecutive reads. In rtc_time_to_timestamp I copied values manually instead of casting - just to be on the safe side. The 11ms wait period was chosen so that it is not a divisor of 1000ms. Signed-off-by: Mateusz Jończyk <[email protected]> Cc: Alessandro Zummo <[email protected]> Cc: Alexandre Belloni <[email protected]> Cc: Shuah Khan <[email protected]> Signed-off-by: Shuah Khan <[email protected]>
2022-02-25Merge tag 'kvmarm-fixes-5.17-4' of ↵Paolo Bonzini3-2/+13
git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into HEAD KVM/arm64 fixes for 5.17, take #4 - Correctly synchronise PMR and co on PSCI CPU_SUSPEND - Skip tests that depend on GICv3 when the HW isn't available
2022-02-25kselftest/arm64: signal: Allow tests to be incompatible with featuresMark Brown3-9/+28
Some features may invalidate some tests, for example by supporting an operation which would trap otherwise. Allow tests to list features that they are incompatible with so we can cover the case where a signal will be generated without disruption on systems where that won't happen. Signed-off-by: Mark Brown <[email protected]> Reviewed-by: Shuah Khan <[email protected]> Acked-by: Catalin Marinas <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Will Deacon <[email protected]>
2022-02-25KVM: selftests: Verify disabling PMU virtualization via KVM_CAP_CONFIG_PMUDavid Dunn1-0/+33
On a VM with PMU disabled via KVM_CAP_PMU_CONFIG, the PMU should not be usable by the guest. Signed-off-by: David Dunn <[email protected]> Message-Id: <[email protected]> Signed-off-by: Paolo Bonzini <[email protected]>
2022-02-25KVM: selftests: Carve out helper to create "default" VM without vCPUsDavid Dunn2-6/+18
Carve out portion of vm_create_default so that selftests can modify a "default" VM prior to creating vcpus. Signed-off-by: David Dunn <[email protected]> Message-Id: <[email protected]> Signed-off-by: Paolo Bonzini <[email protected]>
2022-02-25KVM: x86: Provide per VM capability for disabling PMU virtualizationDavid Dunn1-0/+4
Add a new capability, KVM_CAP_PMU_CAPABILITY, that takes a bitmask of settings/features to allow userspace to configure PMU virtualization on a per-VM basis. For now, support a single flag, KVM_PMU_CAP_DISABLE, to allow disabling PMU virtualization for a VM even when KVM is configured with enable_pmu=true a module level. To keep KVM simple, disallow changing VM's PMU configuration after vCPUs have been created. Signed-off-by: David Dunn <[email protected]> Message-Id: <[email protected]> Signed-off-by: Paolo Bonzini <[email protected]>
2022-02-25KVM: selftests: aarch64: Skip tests if we can't create a vgic-v3Mark Brown3-2/+13
The arch_timer and vgic_irq kselftests assume that they can create a vgic-v3, using the library function vgic_v3_setup() which aborts with a test failure if it is not possible to do so. Since vgic-v3 can only be instantiated on systems where the host has GICv3 this leads to false positives on older systems where that is not the case. Fix this by changing vgic_v3_setup() to return an error if the vgic can't be instantiated and have the callers skip if this happens. We could also exit flagging a skip in vgic_v3_setup() but this would prevent future test cases conditionally deciding which GIC to use or generally doing more complex output. Signed-off-by: Mark Brown <[email protected]> Reviewed-by: Andrew Jones <[email protected]> Tested-by: Ricardo Koller <[email protected]> Signed-off-by: Marc Zyngier <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2022-02-24selftests: mptcp: do complete cleanup at exitPaolo Abeni1-2/+2
After commit 05be5e273c84 ("selftests: mptcp: add disconnect tests") the mptcp selftests leave behind a couple of tmp files after each run. run_tests_disconnect() misnames a few variables used to track them. Address the issue setting the appropriate global variables Fixes: 05be5e273c84 ("selftests: mptcp: add disconnect tests") Signed-off-by: Paolo Abeni <[email protected]> Signed-off-by: Mat Martineau <[email protected]> Signed-off-by: Jakub Kicinski <[email protected]>
2022-02-24Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski7-35/+83
tools/testing/selftests/net/mptcp/mptcp_join.sh 34aa6e3bccd8 ("selftests: mptcp: add ip mptcp wrappers") 857898eb4b28 ("selftests: mptcp: add missing join check") 6ef84b1517e0 ("selftests: mptcp: more robust signal race test") https://lore.kernel.org/all/[email protected]/ drivers/net/ethernet/mellanox/mlx5/core/en/tc/act/act.h drivers/net/ethernet/mellanox/mlx5/core/en/tc/act/ct.c fb7e76ea3f3b6 ("net/mlx5e: TC, Skip redundant ct clear actions") c63741b426e11 ("net/mlx5e: Fix MPLSoUDP encap to use MPLS action information") 09bf97923224f ("net/mlx5e: TC, Move pedit_headers_action to parse_attr") 84ba8062e383 ("net/mlx5e: Test CT and SAMPLE on flow attr") efe6f961cd2e ("net/mlx5e: CT, Don't set flow flag CT for ct clear flow") 3b49a7edec1d ("net/mlx5e: TC, Reject rules with multiple CT actions") Signed-off-by: Jakub Kicinski <[email protected]>
2022-02-24Merge tag 'perf-tools-fixes-for-v5.17-2022-02-24' of ↵Linus Torvalds5-21/+8
git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux Pull perf tools fixes from Arnaldo Carvalho de Melo: - Fix double free in in the error path when opening perf.data from multiple files in a directory instead of from a single file - Sync the msr-index.h copy with the kernel sources - Fix error when printing 'weight' field in 'perf script' - Skip failing sigtrap test for arm+aarch64 in 'perf test' - Fix failure to use a cpu list for uncore events in hybrid systems, e.g. Intel Alder Lake * tag 'perf-tools-fixes-for-v5.17-2022-02-24' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux: perf script: Fix error when printing 'weight' field tools arch x86: Sync the msr-index.h copy with the kernel sources perf data: Fix double free in perf_session__delete() perf evlist: Fix failed to use cpu list for uncore events perf test: Skip failing sigtrap test for arm+aarch64
2022-02-24Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvmLinus Torvalds1-0/+1
Pull kvm fixes from Paolo Bonzini: "x86 host: - Expose KVM_CAP_ENABLE_CAP since it is supported - Disable KVM_HC_CLOCK_PAIRING in TSC catchup mode - Ensure async page fault token is nonzero - Fix lockdep false negative - Fix FPU migration regression from the AMX changes x86 guest: - Don't use PV TLB/IPI/yield on uniprocessor guests PPC: - reserve capability id (topic branch for ppc/kvm)" * tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: KVM: x86: nSVM: disallow userspace setting of MSR_AMD64_TSC_RATIO to non default value when tsc scaling disabled KVM: x86/mmu: make apf token non-zero to fix bug KVM: PPC: reserve capability 210 for KVM_CAP_PPC_AIL_MODE_3 x86/kvm: Don't use pv tlb/ipi/sched_yield if on 1 vCPU x86/kvm: Fix compilation warning in non-x86_64 builds x86/kvm/fpu: Remove kvm_vcpu_arch.guest_supported_xcr0 x86/kvm/fpu: Limit guest user_xfeatures to supported bits of XCR0 kvm: x86: Disable KVM_HC_CLOCK_PAIRING if tsc is in always catchup mode KVM: Fix lockdep false negative during host resume KVM: x86: Add KVM_CAP_ENABLE_CAP to x86
2022-02-24Merge tag 'net-5.17-rc6' of ↵Linus Torvalds5-22/+166
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net Pull networking fixes from Jakub Kicinski: "Including fixes from bpf and netfilter. Current release - regressions: - bpf: fix crash due to out of bounds access into reg2btf_ids - mvpp2: always set port pcs ops, avoid null-deref - eth: marvell: fix driver load from initrd - eth: intel: revert "Fix reset bw limit when DCB enabled with 1 TC" Current release - new code bugs: - mptcp: fix race in overlapping signal events Previous releases - regressions: - xen-netback: revert hotplug-status changes causing devices to not be configured - dsa: - avoid call to __dev_set_promiscuity() while rtnl_mutex isn't held - fix panic when removing unoffloaded port from bridge - dsa: microchip: fix bridging with more than two member ports Previous releases - always broken: - bpf: - fix crash due to incorrect copy_map_value when both spin lock and timer are present in a single value - fix a bpf_timer initialization issue with clang - do not try bpf_msg_push_data with len 0 - add schedule points in batch ops - nf_tables: - unregister flowtable hooks on netns exit - correct flow offload action array size - fix a couple of memory leaks - vsock: don't check owner in vhost_vsock_stop() while releasing - gso: do not skip outer ip header in case of ipip and net_failover - smc: use a mutex for locking "struct smc_pnettable" - openvswitch: fix setting ipv6 fields causing hw csum failure - mptcp: fix race in incoming ADD_ADDR option processing - sysfs: add check for netdevice being present to speed_show - sched: act_ct: fix flow table lookup after ct clear or switching zones - eth: intel: fixes for SR-IOV forwarding offloads - eth: broadcom: fixes for selftests and error recovery - eth: mellanox: flow steering and SR-IOV forwarding fixes Misc: - make __pskb_pull_tail() & pskb_carve_frag_list() drop_monitor friends not report freed skbs as drops - force inlining of checksum functions in net/checksum.h" * tag 'net-5.17-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (85 commits) net: mv643xx_eth: process retval from of_get_mac_address ping: remove pr_err from ping_lookup Revert "i40e: Fix reset bw limit when DCB enabled with 1 TC" openvswitch: Fix setting ipv6 fields causing hw csum failure ipv6: prevent a possible race condition with lifetimes net/smc: Use a mutex for locking "struct smc_pnettable" bnx2x: fix driver load from initrd Revert "xen-netback: Check for hotplug-status existence before watching" Revert "xen-netback: remove 'hotplug-status' once it has served its purpose" net/mlx5e: Fix VF min/max rate parameters interchange mistake net/mlx5e: Add missing increment of count net/mlx5e: MPLSoUDP decap, fix check for unsupported matches net/mlx5e: Fix MPLSoUDP encap to use MPLS action information net/mlx5e: Add feature check for set fec counters net/mlx5e: TC, Skip redundant ct clear actions net/mlx5e: TC, Reject rules with forward and drop actions net/mlx5e: TC, Reject rules with drop and modify hdr action net/mlx5e: kTLS, Use CHECKSUM_UNNECESSARY for device-offloaded packets net/mlx5e: Fix wrong return value on ioctl EEPROM query failure net/mlx5: Fix possible deadlock on rule deletion ...
2022-02-24Merge branch 'kvm-ppc-cap-210' into kvm-next-5.18Paolo Bonzini1-0/+1
2022-02-23bpftool: Bpf skeletons assert type sizesDelyan Kratunov1-22/+105
When emitting type declarations in skeletons, bpftool will now also emit static assertions on the size of the data/bss/rodata/etc fields. This ensures that in situations where userspace and kernel types have the same name but differ in size we do not silently produce incorrect results but instead break the build. This was reported in [1] and as expected the repro in [2] fails to build on the new size assert after this change. [1]: Closes: https://github.com/libbpf/libbpf/issues/433 [2]: https://github.com/fuweid/iovisor-bcc-pr-3777 Signed-off-by: Delyan Kratunov <[email protected]> Signed-off-by: Andrii Nakryiko <[email protected]> Tested-by: Hengqi Chen <[email protected]> Acked-by: Hengqi Chen <[email protected]> Link: https://lore.kernel.org/bpf/[email protected]
2022-02-23cpupower: Add "perf" option to print AMD P-State informationHuang Rui2-1/+21
Add "-c --perf" option in cpupower-frequency-info to get the performance and frequency values for AMD P-State. Commit message amended: Shuah Khan <[email protected]> Reviewed-by: Shuah Khan <[email protected]> Signed-off-by: Huang Rui <[email protected]> Signed-off-by: Shuah Khan <[email protected]>
2022-02-23selftests/lkdtm: Add UBSAN configMuhammad Usama Anjum1-0/+1
UBSAN_BOUNDS and UBSAN_TRAP depend on UBSAN config option. merge_config.sh script generates following warnings if parent config doesn't have UBSAN config already enabled and UBSAN_BOUNDS/UBSAN_TRAP config options don't get added to the parent config. Value requested for CONFIG_UBSAN_BOUNDS not in final .config Requested value: CONFIG_UBSAN_BOUNDS=y Actual value: Value requested for CONFIG_UBSAN_TRAP not in final .config Requested value: CONFIG_UBSAN_TRAP=y Actual value: Fix this by including UBSAN config. Fixes: c75be56e35b2 ("lkdtm/bugs: Add ARRAY_BOUNDS to selftests") Signed-off-by: Muhammad Usama Anjum <[email protected]> Acked-by: Kees Cook <[email protected]> Signed-off-by: Shuah Khan <[email protected]>
2022-02-23selftests/lkdtm: Remove dead config optionMuhammad Usama Anjum1-1/+0
CONFIG_HARDENED_USERCOPY_FALLBACK config option has been removed in commit 53944f171a89 ("mm: remove HARDENED_USERCOPY_FALLBACK"). Remove it from the lkdtm selftest config. Signed-off-by: Muhammad Usama Anjum <[email protected]> Acked-by: Kees Cook <[email protected]> Signed-off-by: Shuah Khan <[email protected]>
Powered by cgit, Gruvboxed by Blaster4385.