aboutsummaryrefslogtreecommitdiff
path: root/tools
AgeCommit message (Collapse)AuthorFilesLines
2022-05-19cxl/mem: Merge cxl_dvsec_ranges() and cxl_hdm_decode_init()Dan Williams3-16/+5
In preparation for changing how the driver handles 'mem_enable' in the CXL DVSEC control register. Merge the contents of cxl_hdm_decode_init() into cxl_dvsec_ranges() and rename the combined function cxl_hdm_decode_init(). The possible cleanups and fixes that result from this merge are saved for a follow-on change. Reviewed-by: Ira Weiny <[email protected]> Link: https://lore.kernel.org/r/165291690027.1426646.10249756632415633752.stgit@dwillia2-xfh Signed-off-by: Dan Williams <[email protected]>
2022-05-19cxl/mem: Consolidate CXL DVSEC Range enumeration in the coreDan Williams3-10/+17
In preparation for fixing the setting of the 'mem_enabled' bit in CXL DVSEC Control register, move all CXL DVSEC range enumeration into the same source file. Reviewed-by: Ira Weiny <[email protected]> Reviewed-by: Jonathan Cameron <[email protected]> Link: https://lore.kernel.org/r/165291688886.1426646.15046138604010482084.stgit@dwillia2-xfh Signed-off-by: Dan Williams <[email protected]>
2022-05-19cxl/pci: Move cxl_await_media_ready() to the coreDan Williams3-7/+16
Allow cxl_await_media_ready() to be mocked for testing purposes rather than carrying the maintenance burden of an indirect function call in the mainline driver. With the move cxl_await_media_ready() can no longer reuse the mailbox timeout override, so add a media_ready_timeout module parameter to the core to backfill. Reviewed-by: Ira Weiny <[email protected]> Reviewed-by: Jonathan Cameron <[email protected]> Link: https://lore.kernel.org/r/165291688340.1426646.4755627801983775011.stgit@dwillia2-xfh Signed-off-by: Dan Williams <[email protected]>
2022-05-19Merge tag 'net-5.18-rc8' of ↵Linus Torvalds2-3/+47
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net Pull networking fixes from Paolo Abeni: "Including fixes from can, xfrm and netfilter subtrees. Notably this reverts a recent TCP/DCCP netns-related change to address a possible UaF. Current release - regressions: - tcp: revert "tcp/dccp: get rid of inet_twsk_purge()" - xfrm: set dst dev to blackhole_netdev instead of loopback_dev in ifdown Previous releases - regressions: - netfilter: flowtable: fix TCP flow teardown - can: revert "can: m_can: pci: use custom bit timings for Elkhart Lake" - xfrm: check encryption module availability consistency - eth: vmxnet3: fix possible use-after-free bugs in vmxnet3_rq_alloc_rx_buf() - eth: mlx5: initialize flow steering during driver probe - eth: ice: fix crash when writing timestamp on RX rings Previous releases - always broken: - mptcp: fix checksum byte order - eth: lan966x: fix assignment of the MAC address - eth: mlx5: remove HW-GRO from reported features - eth: ftgmac100: disable hardware checksum on AST2600" * tag 'net-5.18-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (50 commits) net: bridge: Clear offload_fwd_mark when passing frame up bridge interface. ptp: ocp: change sysfs attr group handling selftests: forwarding: fix missing backslash netfilter: nf_tables: disable expression reduction infra netfilter: flowtable: move dst_check to packet path netfilter: flowtable: fix TCP flow teardown net: ftgmac100: Disable hardware checksum on AST2600 igb: skip phy status check where unavailable nfc: pn533: Fix buggy cleanup order mptcp: Do TCP fallback on early DSS checksum failure mptcp: fix checksum byte order net: af_key: check encryption module availability consistency net: af_key: add check for pfkey_broadcast in function pfkey_process net/mlx5: Drain fw_reset when removing device net/mlx5e: CT: Fix setting flow_source for smfs ct tuples net/mlx5e: CT: Fix support for GRE tuples net/mlx5e: Remove HW-GRO from reported features net/mlx5e: Properly block HW GRO when XDP is enabled net/mlx5e: Properly block LRO when XDP is enabled net/mlx5e: Block rx-gro-hw feature in switchdev mode ...
2022-05-19Merge tag 'lkdtm-next' of ↵Greg Kroah-Hartman2-4/+6
https://git.kernel.org/pub/scm/linux/kernel/git/kees/linux into char-misc-next Kees writes: lkdtm updates for -next - Test for new usercopy memory regions - avoid GCC 12 warnings - update expected CONFIGs for selftests * tag 'lkdtm-next' of https://git.kernel.org/pub/scm/linux/kernel/git/kees/linux: lkdtm/heap: Hide allocation size from -Warray-bounds selftests/lkdtm: Add configs for stackleak and "after free" tests lkdtm/usercopy: Check vmalloc and >0-order folios lkdtm/usercopy: Rename "heap" to "slab" lkdtm: cfi: Fix type width for masking PAC bits
2022-05-19tools/thermal: remove unneeded semicolonJiapeng Chong1-1/+1
Fix the following coccicheck warnings: ./tools/thermal/thermometer/thermometer.c:147:3-4: Unneeded semicolon. Reported-by: Abaci Robot <[email protected]> Signed-off-by: Jiapeng Chong <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Daniel Lezcano <[email protected]>
2022-05-19tools/lib/thermal: remove unneeded semicolonJiapeng Chong1-1/+1
Fix the following coccicheck warnings: ./tools/lib/thermal/commands.c:215:2-3: Unneeded semicolon. Reported-by: Abaci Robot <[email protected]> Signed-off-by: Jiapeng Chong <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Daniel Lezcano <[email protected]>
2022-05-19tools/thermal: Add thermal daemon skeletonDaniel Lezcano4-3/+383
This change provides a simple daemon skeleton. It is an example of how to use the thermal library which wraps all the complex code related to the netlink and transforms it into a callback oriented code. The goal of this skeleton is to give a base brick for anyone interested in writing its own thermal engine or as an example to rely on to write its own thermal monitoring implementation. In the future, it will evolve with more features and hopefully more logic. Signed-off-by: Daniel Lezcano <[email protected]> Tested-by: Srinivas Pandruvada <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2022-05-19tools/thermal: Add a temperature capture toolDaniel Lezcano6-3/+709
The 'thermometer' tool allows to capture the temperature of a set of thermal zones defined in a configuration file at a specified rate. It is designed to have the lowest possible overhead. It will write the captured temperature per thermal zone per file so making easier to write a gnuplot script. Signed-off-by: Daniel Lezcano <[email protected]> Tested-by: Srinivas Pandruvada <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2022-05-19tools/thermal: Add util libraryDaniel Lezcano10-0/+478
The next changes will provide a couple of tools using some common functions provided by this library. It provides basic wrappers for: - mainloop - logging - timestamp Signed-off-by: Daniel Lezcano <[email protected]> Tested-by: Srinivas Pandruvada <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2022-05-19tools/lib/thermal: Add a thermal libraryDaniel Lezcano13-2/+1347
The thermal framework implements a netlink notification mechanism to be used by the userspace to have a thermal configuration discovery, trip point changes or violation, cooling device changes notifications, etc... This library provides a level of abstraction for the thermal netlink notification allowing the userspace to connect to the notification mechanism more easily. The library is callback oriented. Signed-off-by: Daniel Lezcano <[email protected]> Tested-by: Srinivas Pandruvada <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2022-05-18selftests: forwarding: fix missing backslashJoachim Wiberg1-1/+1
Fix missing backslash, introduced in f62c5acc800ee. Causes all tests to not be installed. Fixes: f62c5acc800e ("selftests/net/forwarding: add missing tests to Makefile") Signed-off-by: Joachim Wiberg <[email protected]> Acked-by: Hangbin Liu <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2022-05-18selftests/bpf: Add missed ima_setup.sh in MakefileHangbin Liu1-1/+1
When build bpf test and install it to another folder, e.g. make -j10 install -C tools/testing/selftests/ TARGETS="bpf" \ SKIP_TARGETS="" INSTALL_PATH=/tmp/kselftests The ima_setup.sh is missed in target folder, which makes test_ima failed. Fix it by adding ima_setup.sh to TEST_PROGS_EXTENDED. Fixes: 34b82d3ac105 ("bpf: Add a selftest for bpf_ima_inode_hash") Signed-off-by: Hangbin Liu <[email protected]> Signed-off-by: Andrii Nakryiko <[email protected]> Acked-by: Yonghong Song <[email protected]> Link: https://lore.kernel.org/bpf/[email protected]
2022-05-18kunit: tool: Use qemu-system-i386 for i386 runsDavid Gow1-1/+1
We're currently using the x86_64 qemu for i386 builds. While this is not incorrect, it's probably more sensible to use the i386 one, which will at least fail properly if we accidentally were to build a 64-bit kernel. Signed-off-by: David Gow <[email protected]> Tested-by: Daniel Latypov <[email protected]> Reviewed-by: Brendan Higgins <[email protected]> Signed-off-by: Shuah Khan <[email protected]>
2022-05-18selftests: netdevsim: Increase sleep time in hw_stats_l3.sh testDanielle Ratson1-2/+2
hw_stats_l3.sh test is failing often for l3 stats shows less than 20 packets after 2 seconds sleep. This is happening since there is a race between the 2 seconds sleep and the netdevsim actually delivering the packets. Increase the sleep time so the packets will be delivered successfully on time. Signed-off-by: Danielle Ratson <[email protected]> Reviewed-by: Petr Machata <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2022-05-17selftests/lkdtm: Add configs for stackleak and "after free" testsMuhammad Usama Anjum1-0/+2
Add config options which are needed for LKDTM sub-tests: STACKLEAK_ERASING test needs GCC_PLUGIN_STACKLEAK config. READ_AFTER_FREE and READ_BUDDY_AFTER_FREE tests need INIT_ON_FREE_DEFAULT_ON config. Signed-off-by: Muhammad Usama Anjum <[email protected]> Signed-off-by: Kees Cook <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2022-05-17perf test: Add basic stat and topdown group testIan Rogers1-0/+67
Add a basic stat test. Add two tests of grouping behavior for topdown events. Topdown events are special as they must be grouped with the slots event first. Reviewed-by: Kan Liang <[email protected]> Signed-off-by: Ian Rogers <[email protected]> Cc: Adrian Hunter <[email protected]> Cc: Alexander Shishkin <[email protected]> Cc: Andi Kleen <[email protected]> Cc: Florian Fischer <[email protected]> Cc: Ingo Molnar <[email protected]> Cc: James Clark <[email protected]> Cc: Jiri Olsa <[email protected]> Cc: John Garry <[email protected]> Cc: Kim Phillips <[email protected]> Cc: Madhavan Srinivasan <[email protected]> Cc: Mark Rutland <[email protected]> Cc: Namhyung Kim <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: Riccardo Mancini <[email protected]> Cc: Shunsuke Nakamura <[email protected]> Cc: Stephane Eranian <[email protected]> Cc: Xing Zhengjun <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2022-05-17perf evlist: Keep topdown counters in weak groupIan Rogers4-2/+39
On Intel Icelake, topdown events must always be grouped with a slots event as leader. When a metric is parsed a weak group is formed and retried if perf_event_open fails. The retried events aren't grouped breaking the slots leader requirement. This change modifies the weak group "reset" behavior so that topdown events aren't broken from the group for the retry. $ perf stat -e '{slots,topdown-bad-spec,topdown-be-bound,topdown-fe-bound,topdown-retiring,branch-instructions,branch-misses,bus-cycles,cache-misses,cache-references,cpu-cycles,instructions,mem-loads,mem-stores,ref-cycles,baclears.any,ARITH.DIVIDER_ACTIVE}:W' -a sleep 1 Performance counter stats for 'system wide': 47,867,188,483 slots (92.27%) <not supported> topdown-bad-spec <not supported> topdown-be-bound <not supported> topdown-fe-bound <not supported> topdown-retiring 2,173,346,937 branch-instructions (92.27%) 10,540,253 branch-misses # 0.48% of all branches (92.29%) 96,291,140 bus-cycles (92.29%) 6,214,202 cache-misses # 20.120 % of all cache refs (92.29%) 30,886,082 cache-references (76.91%) 11,773,726,641 cpu-cycles (84.62%) 11,807,585,307 instructions # 1.00 insn per cycle (92.31%) 0 mem-loads (92.32%) 2,212,928,573 mem-stores (84.69%) 10,024,403,118 ref-cycles (92.35%) 16,232,978 baclears.any (92.35%) 23,832,633 ARITH.DIVIDER_ACTIVE (84.59%) 0.981070734 seconds time elapsed After: $ perf stat -e '{slots,topdown-bad-spec,topdown-be-bound,topdown-fe-bound,topdown-retiring,branch-instructions,branch-misses,bus-cycles,cache-misses,cache-references,cpu-cycles,instructions,mem-loads,mem-stores,ref-cycles,baclears.any,ARITH.DIVIDER_ACTIVE}:W' -a sleep 1 Performance counter stats for 'system wide': 31040189283 slots (92.27%) 8997514811 topdown-bad-spec # 28.2% bad speculation (92.27%) 10997536028 topdown-be-bound # 34.5% backend bound (92.27%) 4778060526 topdown-fe-bound # 15.0% frontend bound (92.27%) 7086628768 topdown-retiring # 22.2% retiring (92.27%) 1417611942 branch-instructions (92.26%) 5285529 branch-misses # 0.37% of all branches (92.28%) 62922469 bus-cycles (92.29%) 1440708 cache-misses # 8.292 % of all cache refs (92.30%) 17374098 cache-references (76.94%) 8040889520 cpu-cycles (84.63%) 7709992319 instructions # 0.96 insn per cycle (92.32%) 0 mem-loads (92.32%) 1515669558 mem-stores (84.68%) 6542411177 ref-cycles (92.35%) 4154149 baclears.any (92.35%) 20556152 ARITH.DIVIDER_ACTIVE (84.59%) 1.010799593 seconds time elapsed Reviewed-by: Kan Liang <[email protected]> Signed-off-by: Ian Rogers <[email protected]> Cc: Adrian Hunter <[email protected]> Cc: Alexander Shishkin <[email protected]> Cc: Andi Kleen <[email protected]> Cc: Florian Fischer <[email protected]> Cc: Ingo Molnar <[email protected]> Cc: James Clark <[email protected]> Cc: Jiri Olsa <[email protected]> Cc: John Garry <[email protected]> Cc: Kim Phillips <[email protected]> Cc: Madhavan Srinivasan <[email protected]> Cc: Mark Rutland <[email protected]> Cc: Namhyung Kim <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: Riccardo Mancini <[email protected]> Cc: Shunsuke Nakamura <[email protected]> Cc: Stephane Eranian <[email protected]> Cc: Xing Zhengjun <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2022-05-17perf scripts python: intel-pt-events.py: Print ptwrite value as a string if ↵Adrian Hunter1-1/+7
it is ASCII It can be convenient to put a string value into a ptwrite payload as a quick and easy way to identify what is being printed. To make that useful, if the Intel ptwrite payload value contains only printable ASCII characters padded with NULLs, then print it also as a string. Using the example program from the "Emulated PTWRITE" section of tools/perf/Documentation/perf-intel-pt.txt: $ echo -n "Hello" | od -t x8 0000000 0000006f6c6c6548 0000005 $ perf record -e intel_pt//u ./eg_ptw 0x0000006f6c6c6548 [ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 0.016 MB perf.data ] $ perf script --itrace=ew intel-pt-events.py Intel PT Branch Trace, Power Events, Event Trace and PTWRITE Switch In 38524/38524 [001] 24166.044995916 0/0 eg_ptw 38524/38524 [001] 24166.045380004 ptwrite jmp IP: 0 payload: 0x6f6c6c6548 Hello 56532c7ce196 perf_emulate_ptwrite+0x16 (/home/ahunter/git/work/eg_ptw) End Signed-off-by: Adrian Hunter <[email protected]> Cc: Jiri Olsa <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2022-05-17perf script: Print Intel ptwrite value as a string if it is ASCIIAdrian Hunter1-2/+30
It can be convenient to put a string value into a ptwrite payload as a quick and easy way to identify what is being printed. To make that useful, if the Intel ptwrite payload value contains only printable ASCII characters padded with NULLs, then print it also as a string. Using the example program from the "Emulated PTWRITE" section of tools/perf/Documentation/perf-intel-pt.txt: $ echo -n "Hello" | od -t x8 0000000 0000006f6c6c6548 0000005 $ perf record -e intel_pt//u ./eg_ptw 0x0000006f6c6c6548 [ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 0.016 MB perf.data ] $ perf script --itrace=ew eg_ptw 35563 [005] 18256.087338: ptwrite: IP: 0 payload: 0x6f6c6c6548 Hello 55e764db5196 perf_emulate_ptwrite+0x16 (/home/user/eg_ptw) $ Signed-off-by: Adrian Hunter <[email protected]> Cc: Jiri Olsa <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2022-05-17perf intel-pt: Add support for emulated ptwriteAdrian Hunter6-3/+224
ptwrite is an Intel x86 instruction that writes arbitrary values into an Intel PT trace. It is not supported on all hardware, so provide an alternative that makes use of TNT packets to convey the payload data. TNT packets encode Taken/Not-taken conditional branch information, so taking branches based on the payload value will encode the value into the TNT packet. Refer to the changes to the documentation file perf-intel-pt.txt in this patch for an example. Signed-off-by: Adrian Hunter <[email protected]> Cc: Jiri Olsa <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2022-05-16perf bench breakpoint: Fix build on 32-bit archesArnaldo Carvalho de Melo1-1/+1
Cast pointers to unsigned long instead of to uint64_t to avoid this problem on 32-bit arches: 31 6.89 debian:experimental-x-mips : FAIL gcc version 11.2.0 (Debian 11.2.0-18) bench/breakpoint.c: In function 'breakpoint_setup': bench/breakpoint.c:56:24: error: cast from pointer to integer of different size [-Werror=pointer-to-int-cast] 56 | attr.bp_addr = (uint64_t)addr; | ^ cc1: all warnings being treated as errors make[3]: *** [/git/perf-5.18.0-rc7/tools/build/Makefile.build:139: bench] Error 2 Fixes: 68a6772f11dbb1ed ("perf bench: Add breakpoint benchmarks") Cc: Adrian Hunter <[email protected]> Cc: Alexander Shishkin <[email protected]> Cc: Dmitriy Vyukov <[email protected]> Cc: Ian Rogers <[email protected]> Cc: Ingo Molnar <[email protected]> Cc: Jiri Olsa <[email protected]> Cc: Marco Elver <[email protected]> Cc: Mark Rutland <[email protected]> Cc: Namhyung Kim <[email protected]> Cc: Peter Zijlstra <[email protected]> Link: http://lore.kernel.org/lkml/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2022-05-16selftests/bpf: Fix building bpf selftests staticallyYosry Ahmed1-2/+4
bpf selftests can no longer be built with CFLAGS=-static with liburandom_read.so and its dependent target. Filter out -static for liburandom_read.so and its dependent target. When building statically, this leaves urandom_read relying on system-wide shared libraries. Signed-off-by: Yosry Ahmed <[email protected]> Signed-off-by: Andrii Nakryiko <[email protected]> Link: https://lore.kernel.org/bpf/[email protected]
2022-05-16libbpf: fix memory leak in attach_tp for target-less tracepoint programAndrii Nakryiko1-4/+4
Fix sec_name memory leak if user defines target-less SEC("tp"). Fixes: 9af8efc45eb1 ("libbpf: Allow "incomplete" basic tracing SEC() definitions") Signed-off-by: Andrii Nakryiko <[email protected]> Acked-by: David Vernet <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Alexei Starovoitov <[email protected]>
2022-05-16dax: introduce DAX_RECOVERY_WRITE dax access modeJane Chu1-1/+3
Up till now, dax_direct_access() is used implicitly for normal access, but for the purpose of recovery write, dax range with poison is requested. To make the interface clear, introduce enum dax_access_mode { DAX_ACCESS, DAX_RECOVERY_WRITE, } where DAX_ACCESS is used for normal dax access, and DAX_RECOVERY_WRITE is used for dax recovery write. Suggested-by: Dan Williams <[email protected]> Signed-off-by: Jane Chu <[email protected]> Reviewed-by: Christoph Hellwig <[email protected]> Cc: Mike Snitzer <[email protected]> Reviewed-by: Vivek Goyal <[email protected]> Link: https://lore.kernel.org/r/165247982851.52965.11024212198889762949.stgit@dwillia2-desk3.amr.corp.intel.com Signed-off-by: Dan Williams <[email protected]>
2022-05-16selftests: mptcp: fix a mp_fail test warningGeliang Tang1-0/+1
Old tc versions (iproute2 5.3) show actions in multiple lines, not a single line. Then the following unexpected MP_FAIL selftest output occurs: file received by server has inverted byte at 169 ./mptcp_join.sh: line 1277: [: [{"total acts":1},{"actions":[{"order":0 pedit ,"control_action":{"type":"pipe"}keys 1 index 1 ref 1 bind 1,"installed":0,"last_used":0 key #0 at 148: val ff000000 mask ffffffff 5: integer expression expected 001 Infinite map syn[ ok ] - synack[ ok ] - ack[ ok ] sum[ ok ] - csum [ ok ] ftx[ ok ] - failrx[ ok ] rtx[ ok ] - rstrx [ ok ] itx[ ok ] - infirx[ ok ] ftx[ ok ] - failrx[ ok ] invert This patch adds a 'grep' before 'sed' to fix this. Fixes: b6e074e171bc ("selftests: mptcp: add infinite map testcase") Reviewed-by: Matthieu Baerts <[email protected]> Signed-off-by: Geliang Tang <[email protected]> Signed-off-by: Mat Martineau <[email protected]> Signed-off-by: Jakub Kicinski <[email protected]>
2022-05-16kselftests/ir : Improve readability of modprobe error messageGautam Menghani1-1/+1
Improve the readability of error message which says module not found. The new behaviour is consistent with the modprobe command. Signed-off-by: Gautam Menghani <[email protected]> Signed-off-by: Shuah Khan <[email protected]>
2022-05-16kunit: tool: update riscv QEMU config with new serial dependencyBrendan Higgins1-0/+1
The config for the serial console for riscv, CONFIG_SERIAL_EARLYCON_RISCV_SBI, added a dependency, CONFIG_RISCV_SBI_V01, at some point, so add that in to the base arch config. Signed-off-by: Brendan Higgins <[email protected]> Reviewed-by: David Gow <[email protected]> Signed-off-by: Shuah Khan <[email protected]>
2022-05-16kunit: tool: Add list of all valid test configs on UMLDavid Gow1-0/+37
It's often desirable (particularly in test automation) to run as many tests as possible. This config enables all the tests which work as builtins under UML at present, increasing the total tests run from 156 to 342 (not counting 36 'skipped' tests). They can be run with: ./tools/testing/kunit/kunit.py run --kunitconfig=./tools/testing/kunit/configs/all_tests_uml.config This acts as an in-between point between the KUNIT_ALL_TESTS config (which enables only tests whose dependencies are already enabled), and the kunit_tool --alltests option, which tries to use allyesconfig, taking a very long time to build and breaking very often. Signed-off-by: David Gow <[email protected]> Tested-by: Daniel Latypov <[email protected]> Reviewed-by: Brendan Higgins <[email protected]> Signed-off-by: Shuah Khan <[email protected]>
2022-05-16kunit: tool: misc cleanupsDaniel Latypov7-46/+39
This primarily comes from running pylint over kunit tool code and ignoring some warnings we don't care about. If we ever got a fully clean setup, we could add this to run_checks.py, but we're not there yet. Fix things like * Drop unused imports * check `is None`, not `== None` (see PEP 8) * remove redundant parens around returns * remove redundant `else` / convert `elif` to `if` where appropriate * rename make_arch_qemuconfig() param to base_kunitconfig (this is the name used in the subclass, and it's a better one) * kunit_tool_test: check the exit code for SystemExit (could be 0) Signed-off-by: Daniel Latypov <[email protected]> Reviewed-by: David Gow <[email protected]> Reviewed-by: Brendan Higgins <[email protected]> Signed-off-by: Shuah Khan <[email protected]>
2022-05-16kunit: tool: minor cosmetic cleanups in kunit_parser.pyDaniel Latypov1-54/+17
There should be no behavioral changes from this patch. This patch removes redundant comment text, inlines a function used in only one place, and other such minor tweaks. Signed-off-by: Daniel Latypov <[email protected]> Reviewed-by: David Gow <[email protected]> Reviewed-by: Brendan Higgins <[email protected]> Signed-off-by: Shuah Khan <[email protected]>
2022-05-16kunit: tool: make parser stop overwriting status of suites w/ no_testsDaniel Latypov2-3/+6
Consider this invocation $ ./tools/testing/kunit/kunit.py parse <<EOF TAP version 14 1..2 ok 1 - suite # Subtest: no_tests_suite # catastrophic error! not ok 1 - no_tests_suite EOF It will have a 0 exit code even though there's a "not ok". Consider this one: $ ./tools/testing/kunit/kunit.py parse <<EOF TAP version 14 1..2 ok 1 - suite not ok 1 - no_tests_suite EOF It will a non-zero exit code. Why? We have this line in the kunit_parser.py > parent_test = parse_test_header(lines, test) where we have special handling when we see "# Subtest" and we ignore the explicit reported "not ok 1" status! Also, NO_TESTS at a suite-level only results in a non-zero status code where then there's only one suite atm. This change is the minimal one to make sure we don't overwrite it. Signed-off-by: Daniel Latypov <[email protected]> Reviewed-by: David Gow <[email protected]> Reviewed-by: Brendan Higgins <[email protected]> Signed-off-by: Shuah Khan <[email protected]>
2022-05-16kunit: tool: remove dead parse_crash_in_log() logicDaniel Latypov3-104/+4
This logic depends on the kernel logging a message containing 'kunit test case crashed', but there is no corresponding logic to do so. This is likely a relic of the revision process KUnit initially went through when being upstreamed. Delete it given 1) it's been missing for years and likely won't get implemented 2) the parser has been moving to be a more general KTAP parser, kunit-only magic like this isn't how we'd want to implement it. Signed-off-by: Daniel Latypov <[email protected]> Reviewed-by: David Gow <[email protected]> Reviewed-by: Brendan Higgins <[email protected]> Signed-off-by: Shuah Khan <[email protected]>
2022-05-16kselftest/arm64: Explicitly build no BTI tests with BTI disabledMark Brown1-1/+1
In case a distribution enables branch protection by default do as we do for the main kernel and explicitly disable branch protection when building the test case for having BTI disabled to ensure it doesn't get turned on by the toolchain defaults. Signed-off-by: Mark Brown <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Catalin Marinas <[email protected]>
2022-05-16kselftest/arm64: bti: force static linkingAndre Przywara1-2/+2
The "bti" selftests are built with -nostdlib, which apparently automatically creates a statically linked binary, which is what we want and need for BTI (to avoid interactions with the dynamic linker). However this is not true when building a PIE binary, which some toolchains (Ubuntu) configure as the default. When compiling btitest with such a toolchain, it will create a dynamically linked binary, which will probably fail some tests, as the dynamic linker might not support BTI: =================== TAP version 13 1..18 not ok 1 nohint_func/call_using_br_x0 not ok 2 nohint_func/call_using_br_x16 not ok 3 nohint_func/call_using_blr .... =================== To make sure we create static binaries, add an explicit -static on the linker command line. This forces static linking even if the toolchain defaults to PIE builds, and fixes btitest runs on BTI enabled machines. Signed-off-by: Andre Przywara <[email protected]> Reviewed-by: Mark Brown <[email protected]> Fixes: 314bcbf09f14 ("kselftest: arm64: Add BTI tests") Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Catalin Marinas <[email protected]>
2022-05-16Merge branch kvm-arm64/psci-suspend into kvmarm-master/nextMarc Zyngier1-31/+132
* kvm-arm64/psci-suspend: : . : Add support for PSCI SYSTEM_SUSPEND and allow userspace to : filter the wake-up events. : : Patches courtesy of Oliver. : . Documentation: KVM: Fix title level for PSCI_SUSPEND selftests: KVM: Test SYSTEM_SUSPEND PSCI call selftests: KVM: Refactor psci_test to make it amenable to new tests selftests: KVM: Use KVM_SET_MP_STATE to power off vCPU in psci_test selftests: KVM: Create helper for making SMCCC calls selftests: KVM: Rename psci_cpu_on_test to psci_test KVM: arm64: Implement PSCI SYSTEM_SUSPEND KVM: arm64: Add support for userspace to suspend a vCPU KVM: arm64: Return a value from check_vcpu_requests() KVM: arm64: Rename the KVM_REQ_SLEEP handler KVM: arm64: Track vCPU power state using MP state values KVM: arm64: Dedupe vCPU power off helpers KVM: arm64: Don't depend on fallthrough to hide SYSTEM_RESET2 Signed-off-by: Marc Zyngier <[email protected]>
2022-05-16Merge branch kvm-arm64/hcall-selection into kvmarm-master/nextMarc Zyngier9-29/+599
* kvm-arm64/hcall-selection: : . : Introduce a new set of virtual sysregs for userspace to : select the hypercalls it wants to see exposed to the guest. : : Patches courtesy of Raghavendra and Oliver. : . KVM: arm64: Fix hypercall bitmap writeback when vcpus have already run KVM: arm64: Hide KVM_REG_ARM_*_BMAP_BIT_COUNT from userspace Documentation: Fix index.rst after psci.rst renaming selftests: KVM: aarch64: Add the bitmap firmware registers to get-reg-list selftests: KVM: aarch64: Introduce hypercall ABI test selftests: KVM: Create helper for making SMCCC calls selftests: KVM: Rename psci_cpu_on_test to psci_test tools: Import ARM SMCCC definitions Docs: KVM: Add doc for the bitmap firmware registers Docs: KVM: Rename psci.rst to hypercalls.rst KVM: arm64: Add vendor hypervisor firmware register KVM: arm64: Add standard hypervisor firmware register KVM: arm64: Setup a framework for hypercall bitmap firmware registers KVM: arm64: Factor out firmware register handling from psci.c Signed-off-by: Marc Zyngier <[email protected]>
2022-05-16Merge remote-tracking branch 'torvalds/master' into perf/coreArnaldo Carvalho de Melo9-7/+431
To pick up fixes from perf/urgent. Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2022-05-16net: add IFLA_TSO_{MAX_SIZE|SEGS} attributesEric Dumazet1-0/+2
New netlink attributes IFLA_TSO_MAX_SIZE and IFLA_TSO_MAX_SEGS are used to report to user-space the device TSO limits. ip -d link sh dev eth1 ... tso_max_size 65536 tso_max_segs 65535 Signed-off-by: Eric Dumazet <[email protected]> Acked-by: Alexander Duyck <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2022-05-15selftests/arm64: Use switch statements in mte_common_util.cMark Brown1-7/+16
In the MTE tests there are several places where we use chains of if statements to open code what could be written as switch statements, move over to switch statements to make the idiom clearer. Signed-off-by: Mark Brown <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Catalin Marinas <[email protected]>
2022-05-15selftests/arm64: Remove casts to/from void in check_tags_inclusionMark Brown1-12/+12
Void pointers may be freely used with other pointer types in C, any casts between void * and other pointer types serve no purpose other than to mask potential warnings. Drop such casts from check_tags_inclusion to help with future review of the code. Signed-off-by: Mark Brown <[email protected]> Reviewed-by: Shuah Khan <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Catalin Marinas <[email protected]>
2022-05-15selftests/arm64: Check failures to set tags in check_tags_inclusionMark Brown1-6/+12
The MTE check_tags_inclusion test uses the mte_switch_mode() helper but ignores the return values it generates meaning we might not be testing the things we're trying to test, fail the test if it reports an error. The helper will log any errors it returns. Signed-off-by: Mark Brown <[email protected]> Reviewed-by: Shuah Khan <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Catalin Marinas <[email protected]>
2022-05-15selftests/arm64: Allow zero tags in mte_switch_mode()Mark Brown1-1/+1
mte_switch_mode() currently rejects attempts to set a zero tag however there are tests such as check_tags_inclusion which attempt to cover cases with zero tags using mte_switch_mode(). Since it is not clear why we are rejecting zero tags change the test to accept them. The issue has not previously been as apparent as it should be since the return value of mte_switch_mode() was not always checked in the callers and the tests weren't otherwise failing. Signed-off-by: Mark Brown <[email protected]> Reviewed-by: Shuah Khan <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Catalin Marinas <[email protected]>
2022-05-15selftests/arm64: Log errors in verify_mte_pointer_validity()Mark Brown1-3/+9
When we detect a problem in verify_mte_pointer_validity() while checking tags we don't log what the problem was which makes debugging harder. Add some diagnostics. Signed-off-by: Mark Brown <[email protected]> Reviewed-by: Shuah Khan <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Catalin Marinas <[email protected]>
2022-05-14Merge tag 'perf-tools-fixes-for-v5.18-2022-05-14' of ↵Linus Torvalds3-2/+11
git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux Pull perf tools fixes from Arnaldo Carvalho de Melo: - Fix two NDEBUG warnings in 'perf bench numa' - Fix ARM coresight `perf test` failure - Sync linux/kvm.h with the kernel sources - Add James and Mike as Arm64 performance events reviewers * tag 'perf-tools-fixes-for-v5.18-2022-05-14' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux: MAINTAINERS: Add James and Mike as Arm64 performance events reviewers tools headers UAPI: Sync linux/kvm.h with the kernel sources perf tests: Fix coresight `perf test` failure. perf bench: Fix two numa NDEBUG warnings
2022-05-13selftests: mptcp: add subflow limits test-casesPaolo Abeni1-2/+46
Add and delete a bunch of endpoints and verify the respect of configured limits. This covers the codepath introduced by the previous patch. Fixes: 69c6ce7b6eca ("selftests: mptcp: add implicit endpoint test case") Signed-off-by: Paolo Abeni <[email protected]> Signed-off-by: Mat Martineau <[email protected]> Signed-off-by: Jakub Kicinski <[email protected]>
2022-05-13bpftool: Use sysfs vmlinux when dumping BTF by IDLarysa Zaremba1-9/+53
Currently, dumping almost all BTFs specified by id requires using the -B option to pass the base BTF. For kernel module BTFs the vmlinux BTF sysfs path should work. This patch simplifies dumping by ID usage by loading vmlinux BTF from sysfs as base, if base BTF was not specified and the ID corresponds to a kernel module BTF. Signed-off-by: Larysa Zaremba <[email protected]> Signed-off-by: Andrii Nakryiko <[email protected]> Reviewed-by: Alexander Lobakin <[email protected]> Link: https://lore.kernel.org/bpf/[email protected]
2022-05-13selftests/bpf: Fix usdt_400 test caseAndrii Nakryiko1-4/+2
usdt_400 test case relies on compiler using the same arg spec for usdt_400 USDT. This assumption breaks with Clang (Clang generates different arg specs with varying offsets relative to %rbp), so simplify this further and hard-code the constant which will guarantee that arg spec is the same across all 400 inlinings. Fixes: 630301b0d59d ("selftests/bpf: Add basic USDT selftests") Reported-by: Mykola Lysenko <[email protected]> Signed-off-by: Andrii Nakryiko <[email protected]> Signed-off-by: Daniel Borkmann <[email protected]> Acked-by: Yonghong Song <[email protected]> Link: https://lore.kernel.org/bpf/[email protected]
2022-05-13kseltest/cgroup: Make test_stress.sh work if run interactivelyWaiman Long1-1/+1
Commit 54de76c01239 ("kselftest/cgroup: fix test_stress.sh to use OUTPUT dir") changes the test_core command path from . to $OUTPUT. However, variable OUTPUT may not be defined if the command is run interactively. Fix that by using ${OUTPUT:-.} to cover both cases. Signed-off-by: Waiman Long <[email protected]> Signed-off-by: Tejun Heo <[email protected]>
2022-05-13Merge tag 'mm-hotfixes-stable-2022-05-11' of ↵Linus Torvalds1-5/+5
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm Pull misc fixes from Andrew Morton: "Seven MM fixes, three of which address issues added in the most recent merge window, four of which are cc:stable. Three non-MM fixes, none very serious" [ And yes, that's a real pull request from Andrew, not me creating a branch from emailed patches. Woo-hoo! ] * tag 'mm-hotfixes-stable-2022-05-11' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: MAINTAINERS: add a mailing list for DAMON development selftests: vm: Makefile: rename TARGETS to VMTARGETS mm/kfence: reset PG_slab and memcg_data before freeing __kfence_pool mailmap: add entry for [email protected] arm[64]/memremap: don't abuse pfn_valid() to ensure presence of linear map procfs: prevent unprivileged processes accessing fdinfo dir mm: mremap: fix sign for EFAULT error return value mm/hwpoison: use pr_err() instead of dump_page() in get_any_page() mm/huge_memory: do not overkill when splitting huge_zero_page Revert "mm/memory-failure.c: skip huge_zero_page in memory_failure()"
Powered by cgit, Gruvboxed by Blaster4385.