| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Switch the test program to sleep that makes more sense for system wide
events. Only enable system wide when root or not paranoid. This avoids
failures under some testing conditions like ARM cloud.
Signed-off-by: Ian Rogers <[email protected]>
Acked-by: Namhyung Kim <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Namhyung Kim <[email protected]>
|
|
In the previous code, there was a memory leak issue where the previously
allocated memory was not freed upon a failed lseek operation. This patch
addresses the problem by releasing the old memory before returning -errno
in case of a lseek failure. This ensures that memory is properly managed
and avoids potential memory leaks.
Signed-off-by: Kuan-Wei Chiu <[email protected]>
Acked-by: Namhyung Kim <[email protected]>
Cc: [email protected]
Cc: [email protected]
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Namhyung Kim <[email protected]>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/bristot/linux
Pull rtla fixes from Daniel Bristot de Oliveira:
"rtla (Real-Time Linux Analysis) tool fixes.
Timerlat auto-analysis:
- Timerlat is reporting thread interference time without thread noise
events occurrence. It was caused because the thread interference
variable was not reset after the analysis of a timerlat activation
that did not hit the threshold.
- The IRQ handler delay is estimated from the delta of the IRQ
latency reported by timerlat, and the timestamp from IRQ handler
start event. If the delta is near-zero, the drift from the external
clock and the trace event and/or the overhead can cause the value
to be negative. If the value is negative, print a zero-delay.
- IRQ handlers happening after the timerlat thread event but before
the stop tracing were being reported as IRQ that happened before
the *current* IRQ occurrence. Ignore Previous IRQ noise in this
condition because they are valid only for the *next* timerlat
activation.
Timerlat user-space:
- Timerlat is stopping all user-space thread if a CPU becomes
offline. Do not stop the entire tool if a CPU is/become offline,
but only the thread of the unavailable CPU. Stop the tool only, if
all threads leave because the CPUs become/are offline.
man-pages:
- Fix command line example in timerlat hist man page"
* tag 'rtla-v6.6-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/bristot/linux:
rtla: fix a example in rtla-timerlat-hist.rst
rtla/timerlat: Do not stop user-space if a cpu is offline
rtla/timerlat_aa: Fix previous IRQ delay for IRQs that happens after thread sample
rtla/timerlat_aa: Fix negative IRQ delay
rtla/timerlat_aa: Zero thread sum after every sample analysis
|
|
Makefile.deps provides direct includes in CFLAGS_$(obj).
We just need to rewrite the rules to make use of the extra
flags, no need to hard-include all of tools/include/uapi.
Acked-by: Stanislav Fomichev <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
As far as I can tell the normal Makefile dependency tracking
works, generated files get re-generated if the YAML was updated.
Let make do its job, don't force the re-generation.
make hardclean can be used to force regeneration.
Acked-by: Stanislav Fomichev <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf
Florian Westphal says:
====================
netfilter patches for net
First patch resolves a regression with vlan header matching, this was
broken since 6.5 release. From myself.
Second patch fixes an ancient problem with sctp connection tracking in
case INIT_ACK packets are delayed. This comes with a selftest, both
patches from Xin Long.
Patch 4 extends the existing nftables audit selftest, from
Phil Sutter.
Patch 5, also from Phil, avoids a situation where nftables
would emit an audit record twice. This was broken since 5.13 days.
Patch 6, from myself, avoids spurious insertion failure if we encounter an
overlapping but expired range during element insertion with the
'nft_set_rbtree' backend. This problem exists since 6.2.
* tag 'nf-23-10-04' of https://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf:
netfilter: nf_tables: nft_set_rbtree: fix spurious insertion failure
netfilter: nf_tables: Deduplicate nft_register_obj audit logs
selftests: netfilter: Extend nft_audit.sh
selftests: netfilter: test for sctp collision processing in nf_conntrack
netfilter: handle the connecting collision properly in nf_conntrack_proto_sctp
netfilter: nft_payload: rebuild vlan header on h_proto access
====================
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf-next
Florian Westphal says:
====================
netfilter updates for net-next
First patch, from myself, is a bug fix. The issue (connect timeout) is
ancient, so I think its safe to give this more soak time given the esoteric
conditions needed to trigger this.
Also updates the existing selftest to cover this.
Add netlink extacks when an update references a non-existent
table/chain/set. This allows userspace to provide much better
errors to the user, from Pablo Neira Ayuso.
Last patch adds more policy checks to nf_tables as a better
alternative to the existing runtime checks, from Phil Sutter.
* tag 'nf-next-23-09-28' of https://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf-next:
netfilter: nf_tables: Utilize NLA_POLICY_NESTED_ARRAY
netfilter: nf_tables: missing extended netlink error in lookup functions
selftests: netfilter: test nat source port clash resolution interaction with tcp early demux
netfilter: nf_nat: undo erroneous tcp edemux lookup after port clash
====================
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
The function that the kprobe_args_char and kprobes_arg_string attaches to
for its test has changed its name once again. Now we need to check for
eventfs_create_dir(), and if it exists, use that, otherwise check for
eventfs_add_dir() and if that exists use that, otherwise use the original
tracefs_create_dir()!
Link: https://lore.kernel.org/linux-trace-kernel/[email protected]
Cc: Mark Rutland <[email protected]>
Cc: Andrew Morton <[email protected]>
Cc: Ajay Kaher <[email protected]>
Acked-by: Masami Hiramatsu (Google) <[email protected]>
Signed-off-by: Steven Rostedt (Google) <[email protected]>
|
|
The uprobe_multi program was not picked up for the gen_tar target. Fix
by adding it to TEST_GEN_FILES.
Signed-off-by: Björn Töpel <[email protected]>
Signed-off-by: Andrii Nakryiko <[email protected]>
Acked-by: Jiri Olsa <[email protected]>
Link: https://lore.kernel.org/bpf/[email protected]
|
|
RISC-V has proper lld support. Use that, similar to what x86 does, for
urandom_read et al.
Signed-off-by: Björn Töpel <[email protected]>
Signed-off-by: Andrii Nakryiko <[email protected]>
Link: https://lore.kernel.org/bpf/[email protected]
|
|
Some userland programs in the BPF test suite, e.g. urandom_read, is
missing cross-build support. Add cross-build support for these
programs
Signed-off-by: Björn Töpel <[email protected]>
Signed-off-by: Andrii Nakryiko <[email protected]>
Link: https://lore.kernel.org/bpf/[email protected]
|
|
Add missing sys_nanosleep name for RISC-V, which is used by some tests
(e.g. attach_probe).
Fixes: 08d0ce30e0e4 ("riscv: Implement syscall wrappers")
Signed-off-by: Björn Töpel <[email protected]>
Signed-off-by: Andrii Nakryiko <[email protected]>
Reviewed-by: Sami Tolvanen <[email protected]>
Link: https://lore.kernel.org/bpf/[email protected]
|
|
SYS_PREFIX was missing for a RISC-V, which made a couple of kprobe
tests fail.
Add missing SYS_PREFIX for RISC-V.
Fixes: 08d0ce30e0e4 ("riscv: Implement syscall wrappers")
Signed-off-by: Björn Töpel <[email protected]>
Signed-off-by: Andrii Nakryiko <[email protected]>
Reviewed-by: Sami Tolvanen <[email protected]>
Link: https://lore.kernel.org/bpf/[email protected]
|
|
Since commit 08d0ce30e0e4 ("riscv: Implement syscall wrappers"), riscv
selects ARCH_HAS_SYSCALL_WRAPPER so let's use the generic implementation
of PT_REGS_SYSCALL_REGS().
Fixes: 08d0ce30e0e4 ("riscv: Implement syscall wrappers")
Signed-off-by: Alexandre Ghiti <[email protected]>
Signed-off-by: Andrii Nakryiko <[email protected]>
Reviewed-by: Sami Tolvanen <[email protected]>
Link: https://lore.kernel.org/bpf/[email protected]
|
|
Delete inaccurate descriptions and obsolete metadata for test cases.
It adds zero value, and has a non-zero chance of becoming stale and
misleading in the future. No functional changes intended.
Suggested-by: Sean Christopherson <[email protected]>
Signed-off-by: Like Xu <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Sean Christopherson <[email protected]>
|
|
Treat %ll* formats the same as %l* formats when processing printfs from
the guest so that using e.g. %llx instead of %lx generates the expected
output. Ideally, unexpected formats would generate compile-time warnings
or errors, but it's not at all obvious how to actually accomplish that.
Alternatively, guest_vsnprintf() could assert on an unexpected format,
but since the vast majority of printfs are for failed guest asserts,
getting *something* printed is better than nothing.
E.g. before
==== Test Assertion Failure ====
x86_64/private_mem_conversions_test.c:265: mem[i] == 0
pid=4286 tid=4290 errno=4 - Interrupted system call
1 0x0000000000401c74: __test_mem_conversions at private_mem_conversions_test.c:336
2 0x00007f3aae6076da: ?? ??:0
3 0x00007f3aae32161e: ?? ??:0
Expected 0x0 at offset 0 (gpa 0x%lx), got 0x0
and after
==== Test Assertion Failure ====
x86_64/private_mem_conversions_test.c:265: mem[i] == 0
pid=5664 tid=5668 errno=4 - Interrupted system call
1 0x0000000000401c74: __test_mem_conversions at private_mem_conversions_test.c:336
2 0x00007fbe180076da: ?? ??:0
3 0x00007fbe17d2161e: ?? ??:0
Expected 0x0 at offset 0 (gpa 0x100000000), got 0xcc
Fixes: e5119382499c ("KVM: selftests: Add guest_snprintf() to KVM selftests")
Cc: Aaron Lewis <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Sean Christopherson <[email protected]>
|
|
When a local partition becomes invalid, it won't transition back to
valid partition automatically if a proper "cpuset.cpus.exclusive" or
"cpuset.cpus" change is made. Instead, system administrators have to
explicitly echo "root" or "isolated" into the "cpuset.cpus.partition"
file at the partition root.
This patch now enables the automatic transition of an invalid local
partition back to valid when there is a proper "cpuset.cpus.exclusive"
or "cpuset.cpus" change.
Automatic transition of an invalid remote partition to a valid one,
however, is not covered by this patch. They still need an explicit
write to "cpuset.cpus.partition" to become valid again.
The test_cpuset_prs.sh test script is updated to add new test cases to
test this automatic state transition.
Reported-by: Pierre Gondois <[email protected]>
Link: https://lore.kernel.org/lkml/[email protected]
Signed-off-by: Waiman Long <[email protected]>
Signed-off-by: Tejun Heo <[email protected]>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest
Pull kselftest fix from Shuah Khan:
"One single fix to Makefile to fix the incorrect TARGET name for uevent
test"
* tag 'linux-kselftest-fixes-6.6-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
selftests: Fix wrong TARGET in kselftest top level Makefile
|
|
Update DAMON selftests to test existence of the file for reading/writing
DAMOS apply interval under each scheme directory.
Link: https://lkml.kernel.org/r/[email protected]
Signed-off-by: SeongJae Park <[email protected]>
Cc: Jonathan Corbet <[email protected]>
Cc: Shuah Khan <[email protected]>
Cc: Steven Rostedt (Google) <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
|
|
It is possible that the aligned address falls on no existing mapping,
however that does not mean that we can just align it down to that. This
test verifies that the "vma->vm_start != addr_to_align" check in
can_align_down() prevents disastrous results if aligning down when source
and dest are mutually aligned within a PMD but the source/dest addresses
requested are not at the beginning of the respective mapping containing
these addresses.
Link: https://lkml.kernel.org/r/[email protected]
Signed-off-by: Joel Fernandes (Google) <[email protected]>
Reviewed-by: Lorenzo Stoakes <[email protected]>
Cc: Kalesh Singh <[email protected]>
Cc: "Kirill A. Shutemov" <[email protected]>
Cc: Liam R. Howlett <[email protected]>
Cc: Linus Torvalds <[email protected]>
Cc: Lokesh Gidra <[email protected]>
Cc: Michal Hocko <[email protected]>
Cc: Paul E. McKenney <[email protected]>
Cc: Shuah Khan <[email protected]>
Cc: Suren Baghdasaryan <[email protected]>
Cc: Vlastimil Babka <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
|
|
Move a block of memory within a memory range. Any alignment optimization
on the source address may cause corruption. Verify using kselftest that
it works. I have also verified with tracing that such optimization does
not happen due to this check in can_align_down():
if (!for_stack && vma->vm_start != addr_to_align)
return false;
Link: https://lkml.kernel.org/r/[email protected]
Signed-off-by: Joel Fernandes (Google) <[email protected]>
Reviewed-by: Lorenzo Stoakes <[email protected]>
Cc: Kalesh Singh <[email protected]>
Cc: "Kirill A. Shutemov" <[email protected]>
Cc: Liam R. Howlett <[email protected]>
Cc: Linus Torvalds <[email protected]>
Cc: Lokesh Gidra <[email protected]>
Cc: Michal Hocko <[email protected]>
Cc: Paul E. McKenney <[email protected]>
Cc: Shuah Khan <[email protected]>
Cc: Suren Baghdasaryan <[email protected]>
Cc: Vlastimil Babka <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
|
|
mapping
This patch adds support for verifying that we correctly handle the
situation where something is already mapped before the destination of the remap.
Any realignment of destination address and PMD-copy will destroy that
existing mapping. In such cases, we need to avoid doing the optimization.
To test this, we map an area called the preamble before the remap
region. Then we verify after the mremap operation that this region did not get
corrupted.
Putting some prints in the kernel, I verified that we optimize
correctly in different situations:
Optimize when there is alignment and no previous mapping (this is tested
by previous patch).
<prints>
can_align_down(old_vma->vm_start=2900000, old_addr=2900000, mask=-2097152): 0
can_align_down(new_vma->vm_start=2f00000, new_addr=2f00000, mask=-2097152): 0
=== Starting move_page_tables ===
Doing PUD move for 2800000 -> 2e00000 of extent=200000 <-- Optimization
Doing PUD move for 2a00000 -> 3000000 of extent=200000
Doing PUD move for 2c00000 -> 3200000 of extent=200000
</prints>
Don't optimize when there is alignment but there is previous mapping
(this is tested by this patch).
Notice that can_align_down() returns 1 for the destination mapping
as we detected there is something there.
<prints>
can_align_down(old_vma->vm_start=2900000, old_addr=2900000, mask=-2097152): 0
can_align_down(new_vma->vm_start=5700000, new_addr=5700000, mask=-2097152): 1
=== Starting move_page_tables ===
Doing move_ptes for 2900000 -> 5700000 of extent=100000 <-- Unoptimized
Doing PUD move for 2a00000 -> 5800000 of extent=200000
Doing PUD move for 2c00000 -> 5a00000 of extent=200000
</prints>
Link: https://lkml.kernel.org/r/[email protected]
Signed-off-by: Joel Fernandes (Google) <[email protected]>
Reviewed-by: Lorenzo Stoakes <[email protected]>
Cc: Kalesh Singh <[email protected]>
Cc: "Kirill A. Shutemov" <[email protected]>
Cc: Liam R. Howlett <[email protected]>
Cc: Linus Torvalds <[email protected]>
Cc: Lokesh Gidra <[email protected]>
Cc: Michal Hocko <[email protected]>
Cc: Paul E. McKenney <[email protected]>
Cc: Shuah Khan <[email protected]>
Cc: Suren Baghdasaryan <[email protected]>
Cc: Vlastimil Babka <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
|
|
This patch adds a test case to check if a PMD-alignment optimization
successfully happens.
I add support to make sure there is some room before the source mapping,
otherwise the optimization to trigger PMD-aligned move will be disabled as
the kernel will detect that a mapping before the source exists and such
optimization becomes impossible.
Link: https://lkml.kernel.org/r/[email protected]
Signed-off-by: Joel Fernandes (Google) <[email protected]>
Reviewed-by: Lorenzo Stoakes <[email protected]>
Cc: Kalesh Singh <[email protected]>
Cc: "Kirill A. Shutemov" <[email protected]>
Cc: Liam R. Howlett <[email protected]>
Cc: Linus Torvalds <[email protected]>
Cc: Lokesh Gidra <[email protected]>
Cc: Michal Hocko <[email protected]>
Cc: Paul E. McKenney <[email protected]>
Cc: Shuah Khan <[email protected]>
Cc: Suren Baghdasaryan <[email protected]>
Cc: Vlastimil Babka <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
|
|
When a valid remap region could not be found, the source mapping is not
cleaned up. Fix the goto statement such that the clean up happens.
Link: https://lkml.kernel.org/r/[email protected]
Signed-off-by: Joel Fernandes (Google) <[email protected]>
Reviewed-by: Lorenzo Stoakes <[email protected]>
Cc: Kalesh Singh <[email protected]>
Cc: "Kirill A. Shutemov" <[email protected]>
Cc: Liam R. Howlett <[email protected]>
Cc: Linus Torvalds <[email protected]>
Cc: Lokesh Gidra <[email protected]>
Cc: Michal Hocko <[email protected]>
Cc: Paul E. McKenney <[email protected]>
Cc: Shuah Khan <[email protected]>
Cc: Suren Baghdasaryan <[email protected]>
Cc: Vlastimil Babka <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
|
|
The opened file should be closed in run_with_tmpfile(), otherwise resource
leak will occur
Link: https://lkml.kernel.org/r/[email protected]
Signed-off-by: Ding Xiang <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf
Daniel Borkmann says:
====================
pull-request: bpf 2023-10-02
We've added 11 non-merge commits during the last 12 day(s) which contain
a total of 12 files changed, 176 insertions(+), 41 deletions(-).
The main changes are:
1) Fix BPF verifier to reset backtrack_state masks on global function
exit as otherwise subsequent precision tracking would reuse them,
from Andrii Nakryiko.
2) Several sockmap fixes for available bytes accounting,
from John Fastabend.
3) Reject sk_msg egress redirects to non-TCP sockets given this
is only supported for TCP sockets today, from Jakub Sitnicki.
4) Fix a syzkaller splat in bpf_mprog when hitting maximum program
limits with BPF_F_BEFORE directive, from Daniel Borkmann
and Nikolay Aleksandrov.
5) Fix BPF memory allocator to use kmalloc_size_roundup() to adjust
size_index for selecting a bpf_mem_cache, from Hou Tao.
6) Fix arch_prepare_bpf_trampoline return code for s390 JIT,
from Song Liu.
7) Fix bpf_trampoline_get when CONFIG_BPF_JIT is turned off,
from Leon Hwang.
* tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf:
bpf: Use kmalloc_size_roundup() to adjust size_index
selftest/bpf: Add various selftests for program limits
bpf, mprog: Fix maximum program check on mprog attachment
bpf, sockmap: Reject sk_msg egress redirects to non-TCP sockets
bpf, sockmap: Add tests for MSG_F_PEEK
bpf, sockmap: Do not inc copied_seq when PEEK flag set
bpf: tcp_read_skb needs to pop skb regardless of seq
bpf: unconditionally reset backtrack_state masks on global func exit
bpf: Fix tr dereferencing
selftests/bpf: Check bpf_cubic_acked() is called via struct_ops
s390/bpf: Let arch_prepare_bpf_trampoline return program size
====================
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
When adding/updating an object, the transaction handler emits suitable
audit log entries already, the one in nft_obj_notify() is redundant. To
fix that (and retain the audit logging from objects' 'update' callback),
Introduce an "audit log free" variant for internal use.
Fixes: c520292f29b8 ("audit: log nftables configuration change events once per table")
Signed-off-by: Phil Sutter <[email protected]>
Reviewed-by: Richard Guy Briggs <[email protected]>
Acked-by: Paul Moore <[email protected]> (Audit)
Signed-off-by: Florian Westphal <[email protected]>
|
|
Add a new test for testing shared umem feature. This is accomplished by
adding a new XDP program and using the multiple sockets.
The new XDP program redirects the packets based on the destination MAC
address.
Signed-off-by: Tushar Vyavahare <[email protected]>
Signed-off-by: Daniel Borkmann <[email protected]>
Acked-by: Magnus Karlsson <[email protected]>
Link: https://lore.kernel.org/bpf/[email protected]
|
|
Modify xsk_update_xskmap() to accept the index as an argument, enabling
the addition of multiple sockets to xskmap.
Signed-off-by: Tushar Vyavahare <[email protected]>
Signed-off-by: Daniel Borkmann <[email protected]>
Acked-by: Magnus Karlsson <[email protected]>
Link: https://lore.kernel.org/bpf/[email protected]
|
|
Update send_pkts() to handle multiple sockets for sending packets.
Multiple TX sockets are utilized alternately based on the batch size for
improve packet transmission.
Signed-off-by: Tushar Vyavahare <[email protected]>
Signed-off-by: Daniel Borkmann <[email protected]>
Acked-by: Magnus Karlsson <[email protected]>
Link: https://lore.kernel.org/bpf/[email protected]
|
|
The pkt_set() function no longer needs the umem parameter. This commit
removes the umem parameter from the pkt_set() function.
Signed-off-by: Tushar Vyavahare <[email protected]>
Signed-off-by: Daniel Borkmann <[email protected]>
Acked-by: Magnus Karlsson <[email protected]>
Link: https://lore.kernel.org/bpf/[email protected]
|
|
Improve the receive_pkt() function to enable it to receive packets from
multiple sockets. Define a sock_num variable to iterate through all the
sockets in the Rx path. Add nb_valid_entries to check that all the
expected number of packets are received.
Revise the function __receive_pkts() to only inspect the receive ring
once, handle any received packets, and promptly return. Implement a bitmap
to store the value of number of sockets. Update Makefile to include
find_bit.c for compiling xskxceiver.
Signed-off-by: Tushar Vyavahare <[email protected]>
Signed-off-by: Daniel Borkmann <[email protected]>
Acked-by: Magnus Karlsson <[email protected]>
Link: https://lore.kernel.org/bpf/[email protected]
|
|
Move the src_mac and dst_mac fields from the ifobject structure to the
xsk_socket_info structure to achieve per-socket MAC address assignment.
Require this in order to steer traffic to various sockets in subsequent
patches.
Signed-off-by: Tushar Vyavahare <[email protected]>
Signed-off-by: Daniel Borkmann <[email protected]>
Acked-by: Magnus Karlsson <[email protected]>
Link: https://lore.kernel.org/bpf/[email protected]
|
|
Rename the header file to a generic name so that it can be used by all
future XDP programs. Ensure that the xsk_xdp_common.h header file includes
include guards.
Signed-off-by: Tushar Vyavahare <[email protected]>
Signed-off-by: Daniel Borkmann <[email protected]>
Acked-by: Magnus Karlsson <[email protected]>
Link: https://lore.kernel.org/bpf/[email protected]
|
|
Move the packet stream from the ifobject struct to the xsk_socket_info
struct to enable the use of different streams for different sockets. This
will facilitate the sending and receiving of data from multiple sockets
simultaneously using the SHARED_XDP_UMEM feature.
Signed-off-by: Tushar Vyavahare <[email protected]>
Signed-off-by: Daniel Borkmann <[email protected]>
Acked-by: Magnus Karlsson <[email protected]>
Link: https://lore.kernel.org/bpf/[email protected]
|
|
Add tests for sets and elements and deletion of all kinds. Also
reorder rule reset tests: By moving the bulk rule add command up, the
two 'reset rules' tests become identical.
While at it, fix for a failing bulk rule add test's error status getting
lost due to its use in a pipe. Avoid this by using a temporary file.
Headings in diff output for failing tests contain no useful data, strip
them.
Signed-off-by: Phil Sutter <[email protected]>
Signed-off-by: Florian Westphal <[email protected]>
|
|
This patch adds a test case to reproduce the SCTP DATA chunk retransmission
timeout issue caused by the improper SCTP collision processing in netfilter
nf_conntrack_proto_sctp.
In this test, client sends a INIT chunk, but the INIT_ACK replied from
server is delayed until the server sends a INIT chunk to start a new
connection from its side. After the connection is complete from server
side, the delayed INIT_ACK arrives in nf_conntrack_proto_sctp.
The delayed INIT_ACK should be dropped in nf_conntrack_proto_sctp instead
of updating the vtag with the out-of-date init_tag, otherwise, the vtag
in DATA chunks later sent by client don't match the vtag in the conntrack
entry and the DATA chunks get dropped.
Signed-off-by: Xin Long <[email protected]>
Signed-off-by: Florian Westphal <[email protected]>
|
|
Now that we have exposed USER_EVENT_REG_PERSIST events can persist both
via the ABI and in the /sys/kernel/tracing/dynamic_events file.
Ensure both the ABI and DYN cases work by calling both during the parse
tests. Add new flags test that ensures only USER_EVENT_REG_PERSIST is
honored and any other flag is invalid.
Link: https://lkml.kernel.org/r/[email protected]
Signed-off-by: Beau Belgrave <[email protected]>
Signed-off-by: Steven Rostedt (Google) <[email protected]>
|
|
Replace the existing /* fallthrough */ comments with the
new 'fallthrough' pseudo-keyword macro:
https://www.kernel.org/doc/html/v5.7/process/deprecated.html?highlight=fallthrough#implicit-switch-case-fall-through
Signed-off-by: Ruan Jinjie <[email protected]>
Signed-off-by: Ingo Molnar <[email protected]>
Cc: Josh Poimboeuf <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: [email protected]
|
|
Here is how it works:
* fault and fill the stack from RSP with INT3 down until rlimit allows,
* fill upwards with INT3 too, overwrite libc stuff, argv, envp,
* try to exec INT3 on each page and catch it in either SIGSEGV or
SIGTRAP handler.
Note: trying to execute _every_ INT3 on a 8 MiB stack takes 30-40 seconds
even on fast machine which is too much for kernel selftesting
(not for LTP!) so only 1 INT3 per page is tried.
Tested on F37 kernel and on a custom kernel which does:
vm_flags |= VM_EXEC;
to stack VMA.
Report from the buggy kernel:
$ ./nx_stack_32
stack min ff007000
stack max ff807000
FAIL executable page on the stack: eip ff806001
$ ./nx_stack_64
stack min 7ffe65bb0000
stack max 7ffe663b0000
FAIL executable page on the stack: rip 7ffe663af001
Signed-off-by: Alexey Dobriyan <[email protected]>
Signed-off-by: Ingo Molnar <[email protected]>
Link: https://lore.kernel.org/r/4cef8266-ad6d-48af-a5f1-fc2b6a8eb422@p183
|
|
commit 'be65de6b03aa ("fs: Remove dcookies support")' removed the
syscall definition for lookup_dcookie. However, syscall tables still
point to the old sys_lookup_dcookie() definition. Update syscall tables
of all architectures to directly point to sys_ni_syscall() instead.
Signed-off-by: Sohil Mehta <[email protected]>
Reviewed-by: Randy Dunlap <[email protected]>
Acked-by: Namhyung Kim <[email protected]> # for perf
Acked-by: Russell King (Oracle) <[email protected]>
Acked-by: Geert Uytterhoeven <[email protected]>
Signed-off-by: Arnd Bergmann <[email protected]>
|
|
key_serial_t fields are signed integers. Use nla_get/put_s32 for
those to avoid implicit signed conversion in the netlink protocol.
Signed-off-by: Chuck Lever <[email protected]>
Reviewed-by: Simon Horman <[email protected]>
Link: https://lore.kernel.org/r/169530167716.8905.645746457741372879.stgit@oracle-102.nfsv4bat.org
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
Socket file descriptors are signed integers. Use nla_get/put_s32 for
those to avoid implicit signed conversion in the netlink protocol.
Signed-off-by: Chuck Lever <[email protected]>
Reviewed-by: Simon Horman <[email protected]>
Link: https://lore.kernel.org/r/169530165057.8905.8650469415145814828.stgit@oracle-102.nfsv4bat.org
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull misc fixes from Andrew Morton:
"Fourteen hotfixes, eleven of which are cc:stable. The remainder
pertain to issues which were introduced after 6.5"
* tag 'mm-hotfixes-stable-2023-10-01-08-34' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm:
Crash: add lock to serialize crash hotplug handling
selftests/mm: fix awk usage in charge_reserved_hugetlb.sh and hugetlb_reparenting_test.sh that may cause error
mm: mempolicy: keep VMA walk if both MPOL_MF_STRICT and MPOL_MF_MOVE are specified
mm/damon/vaddr-test: fix memory leak in damon_do_test_apply_three_regions()
mm, memcg: reconsider kmem.limit_in_bytes deprecation
mm: zswap: fix potential memory corruption on duplicate store
arm64: hugetlb: fix set_huge_pte_at() to work with all swap entries
mm: hugetlb: add huge page size param to set_huge_pte_at()
maple_tree: add MAS_UNDERFLOW and MAS_OVERFLOW states
maple_tree: add mas_is_active() to detect in-tree walks
nilfs2: fix potential use after free in nilfs_gccache_submit_read_data()
mm: abstract moving to the next PFN
mm: report success more often from filemap_map_folio_range()
fs: binfmt_elf_efpic: fix personality for ELF-FDPIC
|
|
Some reads of inet->tos are racy.
Add needed READ_ONCE() annotations and convert IP_TOS option lockless.
v2: missing changes in include/net/route.h (David Ahern)
Signed-off-by: Eric Dumazet <[email protected]>
Reviewed-by: David Ahern <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc fixes from Michael Ellerman:
- Fix arch_stack_walk_reliable(), used by live patching
- Fix powerpc selftests to work with run_kselftest.sh
Thanks to Joe Lawrence and Petr Mladek.
* tag 'powerpc-6.6-3' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
selftests/powerpc: Fix emit_tests to work with run_kselftest.sh
powerpc/stacktrace: Fix arch_stack_walk_reliable()
|
|
Extend the "dlfilter C API" test to test
perf_dlfilter_fns.object_code().
Signed-off-by: Adrian Hunter <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Namhyung Kim <[email protected]>
|
|
Ensure PERF_IP_FLAG_ASYNC is set always for asynchronous branches (i.e.
interrupts etc).
Fixes: 90e457f7be08 ("perf tools: Add Intel PT support")
Cc: [email protected]
Signed-off-by: Adrian Hunter <[email protected]>
Acked-by: Namhyung Kim <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Namhyung Kim <[email protected]>
|
|
Stop calling addr_location__exit() when addr_location__init() was not
called.
Fixes: 0dd5041c9a0e ("perf addr_location: Add init/exit/copy functions")
Cc: [email protected]
Signed-off-by: Adrian Hunter <[email protected]>
Acked-by: Namhyung Kim <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Namhyung Kim <[email protected]>
|
|
PMU alias names were computed when the first perf_pmu is created,
scanning all PMUs in event sources for a file called alias that
generally doesn't exist. Switch to trying to load the file when all
PMU related files are loaded in lookup. This would cause a PMU name
lookup of an alias name to fail if no PMUs were loaded, so in that
case all PMUs are loaded and the find repeated. The overhead is
similar but in the (very) general case not all PMUs are scanned for
the alias file.
As the overhead occurs once per invocation it doesn't show in perf
bench internals pmu-scan. On a tigerlake machine, the number of openat
system calls for an event of cpu/cycles/ with perf stat reduces from
94 to 69 (ie 25 fewer openat calls).
Signed-off-by: Ian Rogers <[email protected]>
Acked-by: Namhyung Kim <[email protected]>
Cc: Ravi Bangoria <[email protected]>
Cc: James Clark <[email protected]>
Cc: Leo Yan <[email protected]>
Cc: Kan Liang <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Namhyung Kim <[email protected]>
|