aboutsummaryrefslogtreecommitdiff
path: root/tools
AgeCommit message (Collapse)AuthorFilesLines
2023-10-23Merge branch 'devlink-finish-conversion-to-generated-split_ops'Jakub Kicinski6-15/+7185
Jiri Pirko says: ==================== devlink: finish conversion to generated split_ops This patchset converts the remaining genetlink commands to generated split_ops and removes the existing small_ops arrays entirely alongside with shared netlink attribute policy. Patches #1-#6 are just small preparations and small fixes on multiple places. Note that couple of patches contain the "Fixes" tag but no need to put them into -net tree. Patch #7 is a simple rename preparation Patch #8 is the main one in this set and adds actual definitions of cmds in to yaml file. Patches #9-#10 finalize the change removing bits that are no longer in use. ==================== Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2023-10-23netlink: specs: devlink: add the remaining command to generate complete ↵Jiri Pirko2-1/+7122
split_ops Currently, some of the commands are not described in devlink yaml file and are manually filled in net/devlink/netlink.c in small_ops. To make all part of split_ops, add definitions of the rest of the commands alongside with needed attributes and enums. Note that this focuses on the kernel side. The requests are fully described in order to generate split_op alongside with policies. Follow-up will describe the replies in order to make the userspace helpers complete. Signed-off-by: Jiri Pirko <[email protected]> Reviewed-by: Jacob Keller <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2023-10-23netlink: specs: devlink: remove reload-action from devlink-get cmd replyJiri Pirko2-7/+0
devlink-get command does not contain reload-action attr in reply. Remove it. Signed-off-by: Jiri Pirko <[email protected]> Reviewed-by: Jacob Keller <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2023-10-23tools: ynl-gen: render rsp_parse() helpers if cmd has only dump opJiri Pirko1-4/+7
Due to the check in RenderInfo class constructor, type_consistent flag is set to False to avoid rendering the same response parsing helper for do and dump ops. However, in case there is no do, the helper needs to be rendered for dump op. So split check to achieve that. Signed-off-by: Jiri Pirko <[email protected]> Reviewed-by: Jacob Keller <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2023-10-23tools: ynl-gen: introduce support for bitfield32 attribute typeJiri Pirko4-3/+56
Introduce support for attribute type bitfield32. Note that since the generated code works with struct nla_bitfield32, the generator adds netlink.h to the list of includes for userspace headers in case any bitfield32 is present. Note that this is added only to genetlink-legacy scheme as requested by Jakub Kicinski. Signed-off-by: Jiri Pirko <[email protected]> Reviewed-by: Jacob Keller <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2023-10-23Merge tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhostLinus Torvalds1-0/+12
Pull virtio fixes from Michael Tsirkin: "A collection of small fixes that look like worth having in this release" * tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost: virtio_pci: fix the common cfg map size virtio-crypto: handle config changed by work queue vhost: Allow null msg.size on VHOST_IOTLB_INVALIDATE vdpa/mlx5: Fix firmware error on creation of 1k VQs virtio_balloon: Fix endless deflation and inflation on arm64 vdpa/mlx5: Fix double release of debugfs entry virtio-mmio: fix memory leak of vm_dev vdpa_sim_blk: Fix the potential leak of mgmt_dev tools/virtio: Add dma sync api for virtio test
2023-10-23tools: ynl-gen: change spacing around __attribute__Jakub Kicinski7-64/+64
checkpatch gets confused and treats __attribute__ as a function call. It complains about white space before "(": WARNING:SPACING: space prohibited between function name and open parenthesis '(' + struct netdev_queue_get_rsp obj __attribute__ ((aligned (8))); No spaces wins in the kernel: $ git grep 'attribute__((.*aligned(' | wc -l 480 $ git grep 'attribute__ ((.*aligned (' | wc -l 110 $ git grep 'attribute__ ((.*aligned(' | wc -l 94 $ git grep 'attribute__((.*aligned (' | wc -l 63 So, whatever, change the codegen. Note that checkpatch also thinks we should use __aligned(), but this is user space code. Link: https://lore.kernel.org/all/[email protected]/ Acked-by: Stanislav Fomichev <[email protected]> Reviewed-by: Amritha Nambiar <[email protected]> Reviewed-by: Jiri Pirko <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2023-10-23tcp: introduce tcp_clock_ms()Eric Dumazet1-2/+2
It delivers current TCP time stamp in ms unit, and is used in place of confusing tcp_time_stamp_raw() It is the same family than tcp_clock_ns() and tcp_clock_ms(). tcp_time_stamp_raw() will be replaced later for TSval contexts with a more descriptive name. Signed-off-by: Eric Dumazet <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2023-10-21Merge tag 'probes-fixes-v6.6-rc6.2' of ↵Linus Torvalds1-0/+13
git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace Pull probes fixes from Masami Hiramatsu: - kprobe-events: Fix kprobe events to reject if the attached symbol is not unique name because it may not the function which the user want to attach to. (User can attach a probe to such symbol using the nearest unique symbol + offset.) - selftest: Add a testcase to ensure the kprobe event rejects non unique symbol correctly. * tag 'probes-fixes-v6.6-rc6.2' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace: selftests/ftrace: Add new test case which checks non unique symbol tracing/kprobes: Return EADDRNOTAVAIL when func matches several symbols
2023-10-21selftests: tc-testing: add test for 'rt' upgrade on hfscPedro Tammela1-6/+26
Add a test to check if inner rt curves are upgraded to sc curves. Signed-off-by: Pedro Tammela <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2023-10-20Merge tag 'perf-tools-fixes-for-v6.6-2-2023-10-20' of ↵Linus Torvalds5-23/+55
git://git.kernel.org/pub/scm/linux/kernel/git/perf/perf-tools Pull perf tools fixes from Arnaldo Carvalho de Melo: - Fix regression in reading scale and unit files from sysfs for PMU events, so that we can use that info to pretty print instead of printing raw numbers: # perf stat -e power/energy-ram/,power/energy-gpu/ sleep 2 Performance counter stats for 'system wide': 1.64 Joules power/energy-ram/ 0.20 Joules power/energy-gpu/ 2.001228914 seconds time elapsed # # grep -m1 "model name" /proc/cpuinfo model name : Intel(R) Core(TM) i7-8650U CPU @ 1.90GHz # - The small llvm.cpp file used to check if the llvm devel files are present was incorrectly deleted when removing the BPF event in 'perf trace', put it back as it is also used by tools/bpf/bpftool, that uses llvm routines to do disassembly of BPF object files. - Fix use of addr_location__exit() in dlfilter__object_code(), making sure that it is only used to pair a previous addr_location__init() call. * tag 'perf-tools-fixes-for-v6.6-2-2023-10-20' of git://git.kernel.org/pub/scm/linux/kernel/git/perf/perf-tools: tools build: Fix llvm feature detection, still used by bpftool perf dlfilter: Add a test for object_code() perf dlfilter: Fix use of addr_location__exit() in dlfilter__object_code() perf pmu: Fix perf stat output with correct scale and unit
2023-10-20Merge tag 'linux_kselftest_active-fixes-6.6-rc7' of ↵Linus Torvalds1-7/+9
git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest Pull Kselftest fix from Shuah Khan: "One single fix to assert check in user_events abi_test to properly check bit value on Big Endian architectures. The code treated the bit values as Little Endian and the check failed on Big Endian" * tag 'linux_kselftest_active-fixes-6.6-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest: selftests/user_events: Fix abi_test for BE archs
2023-10-20selftests/bpf: Add more test cases for bpf memory allocatorHou Tao2-7/+193
Add the following 3 test cases for bpf memory allocator: 1) Do allocation in bpf program and free through map free 2) Do batch per-cpu allocation and per-cpu free in bpf program 3) Do per-cpu allocation in bpf program and free through map free For per-cpu allocation, because per-cpu allocation can not refill timely sometimes, so test 2) and test 3) consider it is OK for bpf_percpu_obj_new_impl() to return NULL. Signed-off-by: Hou Tao <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Alexei Starovoitov <[email protected]>
2023-10-20selftests/bpf: Make linked_list failure test more robustKumar Kartikeya Dwivedi2-9/+5
The linked list failure test 'pop_front_off' and 'pop_back_off' currently rely on matching exact instruction and register values. The purpose of the test is to ensure the offset is correctly incremented for the returned pointers from list pop helpers, which can then be used with container_of to obtain the real object. Hence, somehow obtaining the information that the offset is 48 will work for us. Make the test more robust by relying on verifier error string of bpf_spin_lock and remove dependence on fragile instruction index or register number, which can be affected by different clang versions used to build the selftests. Fixes: 300f19dcdb99 ("selftests/bpf: Add BPF linked list API tests") Reported-by: Andrii Nakryiko <[email protected]> Signed-off-by: Kumar Kartikeya Dwivedi <[email protected]> Signed-off-by: Andrii Nakryiko <[email protected]> Link: https://lore.kernel.org/bpf/[email protected]
2023-10-20selftests/ftrace: Add new test case which checks non unique symbolFrancis Laniel1-0/+13
If name_show() is non unique, this test will try to install a kprobe on this function which should fail returning EADDRNOTAVAIL. On kernel where name_show() is not unique, this test is skipped. Link: https://lore.kernel.org/all/[email protected]/ Cc: [email protected] Signed-off-by: Francis Laniel <[email protected]> Acked-by: Masami Hiramatsu (Google) <[email protected]> Signed-off-by: Masami Hiramatsu (Google) <[email protected]>
2023-10-20KVM: riscv: selftests: Add SBI DBCN extension to get-reg-list testAnup Patel1-0/+2
We have a new SBI debug console (DBCN) extension supported by in-kernel KVM so let us add this extension to get-reg-list test. Signed-off-by: Anup Patel <[email protected]> Reviewed-by: Andrew Jones <[email protected]> Signed-off-by: Anup Patel <[email protected]>
2023-10-20objtool: Fix return thunk patching in retpolinesJosh Poimboeuf1-0/+16
With CONFIG_RETHUNK enabled, the compiler replaces every RET with a tail call to a return thunk ('JMP __x86_return_thunk'). Objtool annotates all such return sites so they can be patched during boot by apply_returns(). The implementation of __x86_return_thunk() is just a bare RET. It's only meant to be used temporarily until apply_returns() patches all return sites with either a JMP to another return thunk or an actual RET. Removing the .text..__x86.return_thunk section would break objtool's detection of return sites in retpolines. Since retpolines and return thunks would land in the same section, the compiler no longer uses relocations for the intra-section jumps between the retpolines and the return thunk, causing objtool to overlook them. As a result, none of the retpolines' return sites would get patched. Each one stays at 'JMP __x86_return_thunk', effectively a bare RET. Fix it by teaching objtool to detect when a non-relocated jump target is a return thunk (or retpoline). [ bp: Massage the commit message now that the offending commit removing the .text..__x86.return_thunk section has been zapped. Still keep the objtool change here as it makes objtool more robust wrt handling such intra-TU jumps without relocations, should some toolchain and/or config generate them in the future. ] Reported-by: David Kaplan <[email protected]> Signed-off-by: Josh Poimboeuf <[email protected]> Signed-off-by: Ingo Molnar <[email protected]> Signed-off-by: Borislav Petkov (AMD) <[email protected]> Acked-by: Peter Zijlstra (Intel) <[email protected]> Link: https://lore.kernel.org/r/20231012024737.eg5phclogp67ik6x@treble
2023-10-20netlink: specs: add support for auto-sized scalarsJakub Kicinski5-2/+47
Support uint / sint types in specs and YNL. Signed-off-by: Jakub Kicinski <[email protected]> Acked-by: Nicolas Dichtel <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2023-10-20tools: ynl-gen: make the mnl_type() method publicJakub Kicinski1-20/+18
uint/sint support will add more logic to mnl_type(), deduplicate it and make it more accessible. Signed-off-by: Jakub Kicinski <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2023-10-19perf data: Increase RLIMIT_NOFILE limit when open too many files in ↵Yang Jihong1-0/+12
perf_data__create_dir() If using parallel threads to collect data, perf record needs at least 6 fds per CPU. (one for sys_perf_event_open, four for pipe msg and ack of the pipe, see record__thread_data_open_pipes(), and one for open perf.data.XXX) For an environment with more than 100 cores, if perf record uses both `-a` and `--threads` options, it is easy to exceed the upper limit of the file descriptor number, when we run out of them try to increase the limits. Before: $ ulimit -n 1024 $ lscpu | grep 'On-line CPU(s)' On-line CPU(s) list: 0-159 $ perf record --threads -a sleep 1 Failed to create data directory: Too many open files After: $ ulimit -n 1024 $ lscpu | grep 'On-line CPU(s)' On-line CPU(s) list: 0-159 $ perf record --threads -a sleep 1 [ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 0.394 MB perf.data (1576 samples) ] Signed-off-by: Yang Jihong <[email protected]> Acked-by: Namhyung Kim <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Namhyung Kim <[email protected]>
2023-10-19perf vendor events: Update PMC used in PM_RUN_INST_CMPL event for power10 ↵Kajol Jain1-1/+1
platform The CPI_STALL_RATIO metric group can be used to present the high level CPI stall breakdown metrics in powerpc, which will show: - DISPATCH_STALL_CPI ( Dispatch stall cycles per insn ) - ISSUE_STALL_CPI ( Issue stall cycles per insn ) - EXECUTION_STALL_CPI ( Execution stall cycles per insn ) - COMPLETION_STALL_CPI ( Completion stall cycles per insn ) Commit cf26e043c2a9 ("perf vendor events power10: Add JSON metric events to present CPI stall cycles in powerpc)" which added the CPI_STALL_RATIO metric group, also modified the PMC value used in PM_RUN_INST_CMPL event from PMC4 to PMC5, to avoid multiplexing of events. But that got revert in recent changes. Fix this issue by changing back the PMC value used in PM_RUN_INST_CMPL to PMC5. Result with the fix: ./perf stat --metric-no-group -M CPI_STALL_RATIO <workload> Performance counter stats for 'workload': 68,745,426 PM_CMPL_STALL # 0.21 COMPLETION_STALL_CPI 7,692,827 PM_ISSUE_STALL # 0.02 ISSUE_STALL_CPI 322,638,223 PM_RUN_INST_CMPL # 0.05 DISPATCH_STALL_CPI # 0.48 EXECUTION_STALL_CPI 16,858,553 PM_DISP_STALL_CYC 153,880,133 PM_EXEC_STALL 0.089774592 seconds time elapsed "--metric-no-group" is used for forcing PM_RUN_INST_CMPL to be scheduled in all group for more accuracy. Fixes: 7d473f475b2a ("perf vendor events: Move JSON/events to appropriate files for power10 platform") Reported-by: Disha Goel <[email protected]> Signed-off-by: Kajol Jain <[email protected]> Reviewed-by: Athira Rajeev <[email protected]> Tested-by: Disha Goel<[email protected]> Cc: [email protected] Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Namhyung Kim <[email protected]>
2023-10-20tools/power/turbostat: Handle offlined CPUs in cpu_subsetZhang Rui1-10/+21
It is possible that the cpu_subset contains offlined CPUs. If this happens during start, exit immediately because this is likely an operator error that is best fixed by re-invoking. If this happens at runtime, give a warning only because turbostat should do its best effort to continue running. Signed-off-by: Zhang Rui <[email protected]>
2023-10-20tools/power/turbostat: Obey allowed CPUs for system summaryZhang Rui1-25/+46
System summary should summarize the information for allowed CPUs instead of all the present CPUs. Introduce topology information for allowed CPUs, and use them to get system summary. Signed-off-by: Zhang Rui <[email protected]>
2023-10-20Merge tag 'iio-for-6.7a' of ↵Greg Kroah-Hartman2-1/+20
https://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into char-misc-next Jonathan writes: IIO: 1st set of new device support, features and cleanup for 6.7 Particularly great to see a resolver driver move out of staging via a massive set of changes. Only took 13 years :) One small patch added then reverted due to a report of test breakage (ashai-kasei,ak8975: Drop deprecated enums.) An immutable branch was used for some hid-senors changes in case there was a need to take them into the HID tree as well. New device support ----------------- adi,hmc425a - Add support for HMC540SLP3E broadband 4-bit digital attenuator. kionix,kx022a - Add support for the kx132-1211 accelerometer. Require significant driver rework to enable this including add a chip type specific structure to deal with the chip differences. - Add support for the kx132acr-lbz accelerometer (subset of the kx022a feature set). lltc,ltc2309 - New driver for this 8 channel ADC. microchip,mcp3911 - Add support for rest of mcp391x family of ADCs (there are various differences beyond simple channel count variation. Series includes some general driver cleanup. microchip,mcp3564 - New driver for MCP3461, MCP3462, MCP3464, MCP3541, MCP3562, MCP3564 and their R variants of 16/24bit ADCs. A few minor fixed followed. rohm,bu1390 - New driver for this pressure sensor. Staging graduation ------------------ adi,ad1210 (after 13 or so years :) - More or less a complete (step-wise) rewrite of this resolver driver to bring it up to date with modern IIO standards. The fault signal handling mapping to event channels was particularly complex and significant part of the changes. Features -------- iio-core - Add chromacity and color temperature channel types. adi,ad7192 - Oversampling ratio control (called fast settling in datasheet). adi,adis16475 - Add core support and then driver support for delta angle and delta velocity channels. These are intended for summation to establish angle and velocity changes over larger timescales. Fix was needed for alignment after the temperature channel. Further fix reduced set of devices for which the buffer support was applicable as seems burst reads don't cover these on all devices. hid-sensors-als - Chromacity and color temperatures support including in amd sfh. stx104 - Add support for counter subsystem to this multipurpose device. ti,twl6030 - Add missing device tree binding description. Clean up and minor fixes. ------------------------ treewide - Drop some unused declarations across IIO. - Make more use of device_get_match_data() instead of OF specific approaches. Similar cleanup to sets of drivers. - Stop platform remove callbacks returning anything by using the temporary remove_new() callback. - Use i2c_get_match_data() to cope nicely with all types of ID table entry. - Use device_get_match_data() for various platform device to cope with more types of firmware. - Convert from enum to pointer in ID tables allowing use of i2c_get_match_data(). - Fix sorting on some ID tables. - Include specific string helper headers rather than simply string_helpers.h docs - Better description of the ordering requirements etc for available_scan_masks. tools - Handle alignment of mixed sizes where the last element isn't the biggest correctly. Seems that doesn't happen often! adi,ad2s1210 - Lots of work from David Lechner on this driver including a few fixes that are going with the rework to avoid slowing that down. adi,ad4310 - Replace deprecated devm_clk_register() adi,ad74413r - Bring the channel function setting inline with the datasheet. adi,ad7192 - Change to FIELD_PREP(), FIELD_GET(). - Calculate f_order from the sinc filter and chop filter states. - Move more per chip config into data in struct ad7192_chip_info - Cleanup unused parameter in channel macros. adi,adf4350 - Make use of devm_* to simplify error handling for many of the setup calls in probe() / tear down in remove() and error paths. Some more work to be done on this one. - Use dev_err_probe() for errors in probe() callback. adi,adf4413 - Typo in function name prefix. adi,adxl345 - Add channel scale to the chip type specific structure and drop using a type field previously used for indirection. asahi,ak8985 - Fix a mismatch introduced when switching from enum->pointers in the match tables. amlogic,meson - Expand error logging during probe. invensense,mpu6050 - Support level-shifter control. Whilst no one is sure exactly what this is doing it is needed for some old boards. - Document mount-matrix dt-binding. mediatek,mt6577 - Use devm_clk_get_enabled() to replace open coded version and move everything over to being device managed. Drop now empty remove() callback. Fix follows to put the drvdata back. - Use dev_err_probe() for error reporting in probe() callback. memsic,mxc4005 - Add of_match_table. microchip,mcp4725 - Move various chip specific data from being looked up by chip ID to data in the chip type specific structure. silicon-labs,si7005 - Add of_match_table and entry in trivial-devices.yaml st,lsm6dsx - Add missing mount-matrix dt binding documentation. st,spear - Use devm_clk_get_enabled() and some other devm calls to move everything over to being device managed. Drop now empty remove() callback. - Use dev_err_probe() to better handled deferred probing and tidy up error reporting in probe() callback. st,stm32-adc - Add a bit of additional checking in probe() to protect against a NULL pointer (no known path to trigger it today). - Replace deprecated strncpy() ti,ads1015 - Allow for edge triggers. - Document interrupt in dt-bindings. * tag 'iio-for-6.7a' of https://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio: (201 commits) iio: Use device_get_match_data() iio: adc: MCP3564: fix warn: unsigned '__x' is never less than zero. dt-bindings: trivial-devices: add silabs,si7005 iio: si7005: Add device tree support drivers: imu: adis16475.c: Remove scan index from delta channels dt-bindings: iio: imu: st,lsm6dsx: add mount-matrix property iio: resolver: ad2s1210: remove of_match_ptr() iio: resolver: ad2s1210: remove DRV_NAME macro iio: resolver: ad2s1210: move out of staging staging: iio: resolver: ad2s1210: simplify code with guard(mutex) staging: iio: resolver: ad2s1210: clear faults after soft reset staging: iio: resolver: ad2s1210: refactor sample toggle staging: iio: resolver: ad2s1210: remove fault attribute staging: iio: resolver: ad2s1210: add label attribute support staging: iio: resolver: ad2s1210: add register/fault support summary staging: iio: resolver: ad2s1210: implement fault events iio: event: add optional event label support staging: iio: resolver: ad2s1210: rename DOS reset min/max attrs staging: iio: resolver: ad2s1210: convert DOS mismatch threshold to event attr staging: iio: resolver: ad2s1210: convert DOS overrange threshold to event attr ...
2023-10-19perf trace: Use the right bpf_probe_read(_str) variant for reading user dataThomas Richter1-8/+8
Perf test case 111 Check open filename arg using perf trace + vfs_getname fails on s390. This is caused by a failing function bpf_probe_read() in file util/bpf_skel/augmented_raw_syscalls.bpf.c. The root cause is the lookup by address. Function bpf_probe_read() is used. This function works only for architectures with ARCH_HAS_NON_OVERLAPPING_ADDRESS_SPACE. On s390 is not possible to determine from the address to which address space the address belongs to (user or kernel space). Replace bpf_probe_read() by bpf_probe_read_kernel() and bpf_probe_read_str() by bpf_probe_read_user_str() to explicity specify the address space the address refers to. Output before: # ./perf trace -eopen,openat -- touch /tmp/111 libbpf: prog 'sys_enter': BPF program load failed: Invalid argument libbpf: prog 'sys_enter': -- BEGIN PROG LOAD LOG -- reg type unsupported for arg#0 function sys_enter#75 0: R1=ctx(off=0,imm=0) R10=fp0 ; int sys_enter(struct syscall_enter_args *args) 0: (bf) r6 = r1 ; R1=ctx(off=0,imm=0) R6_w=ctx(off=0,imm=0) ; return bpf_get_current_pid_tgid(); 1: (85) call bpf_get_current_pid_tgid#14 ; R0_w=scalar() 2: (63) *(u32 *)(r10 -8) = r0 ; R0_w=scalar() R10=fp0 fp-8=????mmmm 3: (bf) r2 = r10 ; R2_w=fp0 R10=fp0 ; ..... lines deleted here ..... 23: (bf) r3 = r6 ; R3_w=ctx(off=0,imm=0) R6=ctx(off=0,imm=0) 24: (85) call bpf_probe_read#4 unknown func bpf_probe_read#4 processed 23 insns (limit 1000000) max_states_per_insn 0 \ total_states 2 peak_states 2 mark_read 2 -- END PROG LOAD LOG -- libbpf: prog 'sys_enter': failed to load: -22 libbpf: failed to load object 'augmented_raw_syscalls_bpf' libbpf: failed to load BPF skeleton 'augmented_raw_syscalls_bpf': -22 .... Output after: # ./perf test -Fv 111 111: Check open filename arg using perf trace + vfs_getname : --- start --- 1.085 ( 0.011 ms): touch/320753 openat(dfd: CWD, filename: \ "/tmp/temporary_file.SWH85", \ flags: CREAT|NOCTTY|NONBLOCK|WRONLY, mode: IRUGO|IWUGO) = 3 ---- end ---- Check open filename arg using perf trace + vfs_getname: Ok # Test with the sleep command shows: Output before: # ./perf trace -e *sleep sleep 1.234567890 0.000 (1234.681 ms): sleep/63114 clock_nanosleep(rqtp: \ { .tv_sec: 0, .tv_nsec: 0 }, rmtp: 0x3ffe0979720) = 0 # Output after: # ./perf trace -e *sleep sleep 1.234567890 0.000 (1234.686 ms): sleep/64277 clock_nanosleep(rqtp: \ { .tv_sec: 1, .tv_nsec: 234567890 }, rmtp: 0x3fff3df9ea0) = 0 # Fixes: 14e4b9f4289a ("perf trace: Raw augmented syscalls fix libbpf 1.0+ compatibility") Signed-off-by: Thomas Richter <[email protected]> Co-developed-by: Arnaldo Carvalho de Melo <[email protected]> Acked-by: Ilya Leoshkevich <[email protected]> Tested-by: Arnaldo Carvalho de Melo <[email protected]> Cc: Ian Rogers <[email protected]> Cc: [email protected] Cc: [email protected] Cc: [email protected] Cc: [email protected] Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Namhyung Kim <[email protected]>
2023-10-20tools/power/turbostat: Obey allowed CPUs for primary thread/core detectionZhang Rui1-19/+16
Thread_id doesn't tell if a CPU is allowed or not. Detect allowed CPUs only and use the first detected thread/core as the primary thread/core of a core/package. Signed-off-by: Zhang Rui <[email protected]>
2023-10-20tools/power/turbostat: Abstract several functionsZhang Rui1-17/+41
When detecting the primary thread/core in a core/package, current code doesn't handle the allowed CPUs. Abstract several functions for further fix of this issue. No functional change. Signed-off-by: Zhang Rui <[email protected]>
2023-10-20tools/power/turbostat: Obey allowed CPUs during startupZhang Rui1-7/+14
Set turbostat CPU affinity to make sure turbostat is running on one of the allowed CPUs. Set base_cpu to the first allowed CPU so that some platform information is dumped using one of the allowed CPUs. Signed-off-by: Zhang Rui <[email protected]>
2023-10-20tools/power/turbostat: Obey allowed CPUs when accessing CPU countersZhang Rui1-2/+2
for_all_cpus/for_all_cpus_2 are used for accessing the per CPU counters, and they should follow the cpu_allowed_set instead of cpu_present_set. Signed-off-by: Zhang Rui <[email protected]>
2023-10-20tools/power/turbostat: Introduce cpu_allowed_setZhang Rui1-3/+28
Turbostat supports "-c" parameter which limits output to system summary plus the specified cpu-set. But some code still uses cpu_present_set to read and dump the counters. Introduce cpu_allowed_set for code that should obey the specified cpu-set. No functional change. Signed-off-by: Zhang Rui <[email protected]>
2023-10-19tools build: Fix llvm feature detection, still used by bpftoolArnaldo Carvalho de Melo1-0/+14
When removing the BPF event for perf a feature test that checks if the llvm devel files are availabe was removed but that is also used by bpftool. bpftool uses it to decide what kind of disassembly it will use: llvm or binutils based. Removing the tools/build/feature/test-llvm.cpp file made bpftool to always fallback to binutils disassembly, even with the llvm devel files installed, fix it by restoring just that small test-llvm.cpp test file. Fixes: 56b11a2126bf2f42 ("perf bpf: Remove support for embedding clang for compiling BPF events (-e foo.c)") Reported-by: Manu Bretelle <[email protected]> Reviewed-by: Ian Rogers <[email protected]> Reviewed-by: Manu Bretelle <[email protected]> Acked-by: Quentin Monnet <[email protected]> Cc: Adrian Hunter <[email protected]> Cc: Alexander Shishkin <[email protected]> Cc: Andi Kleen <[email protected]> Cc: Andrii Nakryiko <[email protected]> Cc: Anshuman Khandual <[email protected]> Cc: Carsten Haitzler <[email protected]> Cc: Eduard Zingerman <[email protected]> Cc: Fangrui Song <[email protected]> Cc: He Kuang <[email protected]> Cc: Ingo Molnar <[email protected]> Cc: James Clark <[email protected]> Cc: Jiri Olsa <[email protected]> Cc: Kan Liang <[email protected]> Cc: Leo Yan <[email protected]> Cc: Madhavan Srinivasan <[email protected]> Cc: Mark Rutland <[email protected]> Cc: Namhyung Kim <[email protected]> Cc: Nathan Chancellor <[email protected]> Cc: Naveen N. Rao <[email protected]> Cc: Nick Desaulniers <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: Ravi Bangoria <[email protected]> Cc: Rob Herring <[email protected]> Cc: Tiezhu Yang <[email protected]> Cc: Tom Rix <[email protected]> Cc: Wang Nan <[email protected]> Cc: Wang ShaoBo <[email protected]> Cc: Yang Jihong <[email protected]> Cc: Yonghong Song <[email protected]> Cc: YueHaibing <[email protected]> Link: https://lore.kernel.org/lkml/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2023-10-19selftests/bpf: Add tests for open-coded task and css iterChuyi Zhou5-0/+415
This patch adds 4 subtests to demonstrate these patterns and validating correctness. subtest1: 1) We use task_iter to iterate all process in the system and search for the current process with a given pid. 2) We create some threads in current process context, and use BPF_TASK_ITER_PROC_THREADS to iterate all threads of current process. As expected, we would find all the threads of current process. 3) We create some threads and use BPF_TASK_ITER_ALL_THREADS to iterate all threads in the system. As expected, we would find all the threads which was created. subtest2: We create a cgroup and add the current task to the cgroup. In the BPF program, we would use bpf_for_each(css_task, task, css) to iterate all tasks under the cgroup. As expected, we would find the current process. subtest3: 1) We create a cgroup tree. In the BPF program, we use bpf_for_each(css, pos, root, XXX) to iterate all descendant under the root with pre and post order. As expected, we would find all descendant and the last iterating cgroup in post-order is root cgroup, the first iterating cgroup in pre-order is root cgroup. 2) We wse BPF_CGROUP_ITER_ANCESTORS_UP to traverse the cgroup tree starting from leaf and root separately, and record the height. The diff of the hights would be the total tree-high - 1. subtest4: Add some failure testcase when using css_task, task and css iters, e.g, unlock when using task-iters to iterate tasks. Signed-off-by: Chuyi Zhou <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Alexei Starovoitov <[email protected]>
2023-10-19selftests/bpf: rename bpf_iter_task.c to bpf_iter_tasks.cChuyi Zhou2-9/+9
The newly-added struct bpf_iter_task has a name collision with a selftest for the seq_file task iter's bpf skel, so the selftests/bpf/progs file is renamed in order to avoid the collision. Signed-off-by: Chuyi Zhou <[email protected]> Acked-by: Andrii Nakryiko <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Alexei Starovoitov <[email protected]>
2023-10-19bpf: Introduce css open-coded iterator kfuncsChuyi Zhou1-0/+6
This Patch adds kfuncs bpf_iter_css_{new,next,destroy} which allow creation and manipulation of struct bpf_iter_css in open-coded iterator style. These kfuncs actually wrapps css_next_descendant_{pre, post}. css_iter can be used to: 1) iterating a sepcific cgroup tree with pre/post/up order 2) iterating cgroup_subsystem in BPF Prog, like for_each_mem_cgroup_tree/cpuset_for_each_descendant_pre in kernel. The API design is consistent with cgroup_iter. bpf_iter_css_new accepts parameters defining iteration order and starting css. Here we also reuse BPF_CGROUP_ITER_DESCENDANTS_PRE, BPF_CGROUP_ITER_DESCENDANTS_POST, BPF_CGROUP_ITER_ANCESTORS_UP enums. Signed-off-by: Chuyi Zhou <[email protected]> Acked-by: Tejun Heo <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Alexei Starovoitov <[email protected]>
2023-10-19bpf: Introduce task open coded iterator kfuncsChuyi Zhou1-0/+5
This patch adds kfuncs bpf_iter_task_{new,next,destroy} which allow creation and manipulation of struct bpf_iter_task in open-coded iterator style. BPF programs can use these kfuncs or through bpf_for_each macro to iterate all processes in the system. The API design keep consistent with SEC("iter/task"). bpf_iter_task_new() accepts a specific task and iterating type which allows: 1. iterating all process in the system (BPF_TASK_ITER_ALL_PROCS) 2. iterating all threads in the system (BPF_TASK_ITER_ALL_THREADS) 3. iterating all threads of a specific task (BPF_TASK_ITER_PROC_THREADS) Signed-off-by: Chuyi Zhou <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Alexei Starovoitov <[email protected]>
2023-10-19bpf: Introduce css_task open-coded iterator kfuncsChuyi Zhou1-0/+8
This patch adds kfuncs bpf_iter_css_task_{new,next,destroy} which allow creation and manipulation of struct bpf_iter_css_task in open-coded iterator style. These kfuncs actually wrapps css_task_iter_{start,next, end}. BPF programs can use these kfuncs through bpf_for_each macro for iteration of all tasks under a css. css_task_iter_*() would try to get the global spin-lock *css_set_lock*, so the bpf side has to be careful in where it allows to use this iter. Currently we only allow it in bpf_lsm and bpf iter-s. Signed-off-by: Chuyi Zhou <[email protected]> Acked-by: Tejun Heo <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Alexei Starovoitov <[email protected]>
2023-10-19tools: ynl-gen: support limit namesJakub Kicinski1-11/+34
Support the use of symbolic names like s8-min or u32-max in checks to make writing specs less painful. Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2023-10-19tools: ynl-gen: support full range of min/max checks for integer valuesJakub Kicinski1-7/+59
Extend the support to full range of min/max checks. None of the existing YNL families required complex integer validation. The support is less than trivial, because we try to keep struct nla_policy tiny the min/max members it holds in place are s16. Meaning we can only express checks in range of s16. For larger ranges we need to define a structure and link it in the policy. Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2023-10-19tools: ynl-gen: track attribute useJakub Kicinski1-0/+20
For range validation we'll need to know if any individual attribute is used on input (i.e. whether we will generate a policy for it). Track this information. Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2023-10-19selftests/bpf/sockopt: Add io_uring supportBreno Leitao1-6/+107
Expand the sockopt test to use also check for io_uring {g,s}etsockopt commands operations. This patch starts by marking each test if they support io_uring support or not. Right now, io_uring cmd getsockopt() has a limitation of only accepting level == SOL_SOCKET, otherwise it returns -EOPNOTSUPP. Since there aren't any test exercising getsockopt(level == SOL_SOCKET), this patch changes two tests to use level == SOL_SOCKET, they are "getsockopt: support smaller ctx->optlen" and "getsockopt: read ctx->optlen". There is no limitation for the setsockopt() part. Later, each test runs using regular {g,s}etsockopt systemcalls, and, if liburing is supported, execute the same test (again), but calling liburing {g,s}setsockopt commands. This patch also changes the level of two tests to use SOL_SOCKET for the following two tests. This is going to help to exercise the io_uring subsystem: * getsockopt: read ctx->optlen * getsockopt: support smaller ctx->optlen Signed-off-by: Breno Leitao <[email protected]> Link: https://lore.kernel.org/r/[email protected] Acked-by: Martin KaFai Lau <[email protected]> Signed-off-by: Jens Axboe <[email protected]>
2023-10-19selftests/net: Extract uring helpers to be reusableBreno Leitao3-266/+285
Instead of defining basic io_uring functions in the test case, move them to a common directory, so, other tests can use them. This simplify the test code and reuse the common liburing infrastructure. This is basically a copy of what we have in io_uring_zerocopy_tx with some minor improvements to make checkpatch happy. A follow-up test will use the same helpers in a BPF sockopt test. Signed-off-by: Breno Leitao <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jens Axboe <[email protected]>
2023-10-19tools headers: Grab copy of io_uring.hBreno Leitao1-0/+757
This file will be used by mini_uring.h and allow tests to run without the need of installing liburing to run the tests. This is needed to run io_uring tests in BPF, such as (tools/testing/selftests/bpf/prog_tests/sockopt.c). Signed-off-by: Breno Leitao <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jens Axboe <[email protected]>
2023-10-19Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski25-65/+404
Cross-merge networking fixes after downstream PR. net/mac80211/key.c 02e0e426a2fb ("wifi: mac80211: fix error path key leak") 2a8b665e6bcc ("wifi: mac80211: remove key_mtx") 7d6904bf26b9 ("Merge wireless into wireless-next") https://lore.kernel.org/all/[email protected]/ Adjacent changes: drivers/net/ethernet/ti/Kconfig a602ee3176a8 ("net: ethernet: ti: Fix mixed module-builtin object") 98bdeae9502b ("net: cpmac: remove driver to prepare for platform removal") Signed-off-by: Jakub Kicinski <[email protected]>
2023-10-19Merge tag 'net-6.6-rc7' of ↵Linus Torvalds8-34/+257
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net Pull networking fixes from Jakub Kicinski: "Including fixes from bluetooth, netfilter, WiFi. Feels like an up-tick in regression fixes, mostly for older releases. The hfsc fix, tcp_disconnect() and Intel WWAN fixes stand out as fairly clear-cut user reported regressions. The mlx5 DMA bug was causing strife for 390x folks. The fixes themselves are not particularly scary, tho. No open investigations / outstanding reports at the time of writing. Current release - regressions: - eth: mlx5: perform DMA operations in the right locations, make devices usable on s390x, again - sched: sch_hfsc: upgrade 'rt' to 'sc' when it becomes a inner curve, previous fix of rejecting invalid config broke some scripts - rfkill: reduce data->mtx scope in rfkill_fop_open, avoid deadlock - revert "ethtool: Fix mod state of verbose no_mask bitset", needs more work Current release - new code bugs: - tcp: fix listen() warning with v4-mapped-v6 address Previous releases - regressions: - tcp: allow tcp_disconnect() again when threads are waiting, it was denied to plug a constant source of bugs but turns out .NET depends on it - eth: mlx5: fix double-free if buffer refill fails under OOM - revert "net: wwan: iosm: enable runtime pm support for 7560", it's causing regressions and the WWAN team at Intel disappeared - tcp: tsq: relax tcp_small_queue_check() when rtx queue contains a single skb, fix single-stream perf regression on some devices Previous releases - always broken: - Bluetooth: - fix issues in legacy BR/EDR PIN code pairing - correctly bounds check and pad HCI_MON_NEW_INDEX name - netfilter: - more fixes / follow ups for the large "commit protocol" rework, which went in as a fix to 6.5 - fix null-derefs on netlink attrs which user may not pass in - tcp: fix excessive TLP and RACK timeouts from HZ rounding (bless Debian for keeping HZ=250 alive) - net: more strict VIRTIO_NET_HDR_GSO_UDP_L4 validation, prevent letting frankenstein UDP super-frames from getting into the stack - net: fix interface altnames when ifc moves to a new namespace - eth: qed: fix the size of the RX buffers - mptcp: avoid sending RST when closing the initial subflow" * tag 'net-6.6-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (94 commits) Revert "ethtool: Fix mod state of verbose no_mask bitset" selftests: mptcp: join: no RST when rm subflow/addr mptcp: avoid sending RST when closing the initial subflow mptcp: more conservative check for zero probes tcp: check mptcp-level constraints for backlog coalescing selftests: mptcp: join: correctly check for no RST net: ti: icssg-prueth: Fix r30 CMDs bitmasks selftests: net: add very basic test for netdev names and namespaces net: move altnames together with the netdevice net: avoid UAF on deleted altname net: check for altname conflicts when changing netdev's netns net: fix ifname in netlink ntf during netns move net: ethernet: ti: Fix mixed module-builtin object net: phy: bcm7xxx: Add missing 16nm EPHY statistics ipv4: fib: annotate races around nh->nh_saddr_genid and nh->nh_saddr tcp_bpf: properly release resources on error paths net/sched: sch_hfsc: upgrade 'rt' to 'sc' when it becomes a inner curve net: mdio-mux: fix C45 access returning -EIO after API change tcp: tsq: relax tcp_small_queue_check() when rtx queue contains a single skb octeon_ep: update BQL sent bytes before ringing doorbell ...
2023-10-19objtool: Add bcachefs noreturnsKent Overstreet1-0/+2
Signed-off-by: Kent Overstreet <[email protected]>
2023-10-19Merge tag 'seccomp-v6.6-rc7' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux Pull seccomp fix from Kees Cook: - Fix seccomp_unotify perf benchmark for 32-bit (Jiri Slaby) * tag 'seccomp-v6.6-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux: perf/benchmark: fix seccomp_unotify benchmark for 32-bit
2023-10-19selftests: mptcp: join: no RST when rm subflow/addrMatthieu Baerts1-0/+13
Recently, we noticed that some RST were wrongly generated when removing the initial subflow. This patch makes sure RST are not sent when removing any subflows or any addresses. Fixes: c2b2ae3925b6 ("mptcp: handle correctly disconnect() failures") Cc: [email protected] Acked-by: Paolo Abeni <[email protected]> Signed-off-by: Matthieu Baerts <[email protected]> Signed-off-by: Mat Martineau <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2023-10-19selftests: mptcp: join: correctly check for no RSTMatthieu Baerts1-2/+6
The commit mentioned below was more tolerant with the number of RST seen during a test because in some uncontrollable situations, multiple RST can be generated. But it was not taking into account the case where no RST are expected: this validation was then no longer reporting issues for the 0 RST case because it is not possible to have less than 0 RST in the counter. This patch fixes the issue by adding a specific condition. Fixes: 6bf41020b72b ("selftests: mptcp: update and extend fastclose test-cases") Cc: [email protected] Reviewed-by: Mat Martineau <[email protected]> Signed-off-by: Matthieu Baerts <[email protected]> Signed-off-by: Mat Martineau <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2023-10-19bpftool: Wrap struct_ops dump in an arrayManu Bretelle1-0/+6
When dumping a struct_ops, 2 dictionaries are emitted. When using `name`, they were already wrapped in an array, but not when using `id`. Causing `jq` to fail at parsing the payload as it reached the comma following the first dict. This change wraps those dictionaries in an array so valid json is emitted. Before, jq fails to parse the output: ``` $ sudo bpftool struct_ops dump id 1523612 | jq . > /dev/null parse error: Expected value before ',' at line 19, column 2 ``` After, no error parsing the output: ``` sudo ./bpftool struct_ops dump id 1523612 | jq . > /dev/null ``` Signed-off-by: Manu Bretelle <[email protected]> Signed-off-by: Daniel Borkmann <[email protected]> Tested-by: Eduard Zingerman <[email protected]> Acked-by: Eduard Zingerman <[email protected]> Acked-by: Quentin Monnet <[email protected]> Link: https://lore.kernel.org/bpf/[email protected]
2023-10-19bpftool: Fix printing of pointer valueManu Bretelle1-1/+1
When printing a pointer value, "%p" will either print the hexadecimal value of the pointer (e.g `0x1234`), or `(nil)` when NULL. Both of those are invalid json "integer" values and need to be wrapped in quotes. Before: ``` $ sudo bpftool struct_ops dump name ned_dummy_cca | grep next "next": (nil), $ sudo bpftool struct_ops dump name ned_dummy_cca | \ jq '.[1].bpf_struct_ops_tcp_congestion_ops.data.list.next' parse error: Invalid numeric literal at line 29, column 34 ``` After: ``` $ sudo ./bpftool struct_ops dump name ned_dummy_cca | grep next "next": "(nil)", $ sudo ./bpftool struct_ops dump name ned_dummy_cca | \ jq '.[1].bpf_struct_ops_tcp_congestion_ops.data.list.next' "(nil)" ``` Signed-off-by: Manu Bretelle <[email protected]> Signed-off-by: Daniel Borkmann <[email protected]> Tested-by: Eduard Zingerman <[email protected]> Acked-by: Eduard Zingerman <[email protected]> Acked-by: Quentin Monnet <[email protected]> Link: https://lore.kernel.org/bpf/[email protected]
Powered by cgit, Gruvboxed by Blaster4385.