| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
The seccomp benchmark test makes a number of checks on the performance it
measures and logs them to the output but does so in a custom format which
none of the automated test runners understand meaning that the chances that
anyone is paying attention are slim. Let's additionally log each result in
KTAP format so that automated systems parsing the test output will see each
comparison as a test case. The original logs are left in place since they
provide the actual numbers for analysis.
As part of this rework the flow for the main program so that when we skip
tests we still log all the tests we skip, this is because the standard KTAP
headers and footers include counts of the number of expected and run tests.
Tested-by: Anders Roxell <[email protected]>
Acked-by: Kees Cook <[email protected]>
Signed-off-by: Mark Brown <[email protected]>
Signed-off-by: Shuah Khan <[email protected]>
|
|
In preparation for trying to output the test results themselves in TAP
format rework all the prints in the benchmark to use the kselftest output
functions. The uses of system() all produce single line output so we can
avoid having to deal with fully managing the child process and continue to
use system() by simply printing an empty message before we invoke system().
We also leave one printf() used to complete a line of output in place.
Tested-by: Anders Roxell <[email protected]>
Acked-by: Kees Cook <[email protected]>
Signed-off-by: Mark Brown <[email protected]>
Signed-off-by: Shuah Khan <[email protected]>
|
|
The livepatching kselftests rely on comparing expected vs. observed
dmesg output. After each test, new dmesg entries are determined by the
'comm' utility comparing a saved, pre-test copy of dmesg to post-test
dmesg output.
Alexander reports that the 'comm --nocheck-order -13' invocation used by
the tests can be confused when dmesg entry timestamps vary in magnitude
(ie, "[ 98.820331]" vs. "[ 100.031067]"), in which case, additional
messages are reported as new. The unexpected entries then spoil the
test results.
Instead of relying on 'comm' or 'diff' to determine new testing dmesg
entries, refactor the code:
- pre-test : log a unique canary dmesg entry
- test : run tests, log messages
- post-test : filter dmesg starting from pre-test message
Reported-by: Alexander Gordeev <[email protected]>
Closes: https://lore.kernel.org/live-patching/[email protected]/
Signed-off-by: Joe Lawrence <[email protected]>
Acked-by: Alexander Gordeev <[email protected]>
Tested-by: Marcos Paulo de Souza <[email protected]>
Reviewed-by: Marcos Paulo de Souza <[email protected]>
Acked-by: Miroslav Benes <[email protected]>
Signed-off-by: Shuah Khan <[email protected]>
|
|
Clang supports enabling/disabling certain conversion diagnostics via
the -W[no-]compare-distinct-pointer-types command line options.
Disabling this warning is required by some BPF selftests due to
-Werror. Until very recently GCC would emit these warnings
unconditionally, which was a problem for gcc-bpf, but we added support
for the command-line options to GCC upstream [1].
This patch moves the -Wno-cmopare-distinct-pointer-types from
CLANG_CFLAGS to BPF_CFLAGS in selftests/bpf/Makefile so the option
is also used in gcc-bpf builds, not just in clang builds.
Tested in bpf-next master.
No regressions.
[1] https://gcc.gnu.org/pipermail/gcc-patches/2023-August/627769.html
Signed-off-by: Jose E. Marchesi <[email protected]>
Signed-off-by: Daniel Borkmann <[email protected]>
Link: https://lore.kernel.org/bpf/[email protected]
|
|
A few BPF selftests perform type punning and they may break strict
aliasing rules, which are exploited by both GCC and clang by default
while optimizing. This can lead to broken compiled programs.
This patch disables strict aliasing for these particular tests, by
mean of the -fno-strict-aliasing command line option. This will make
sure these tests are optimized properly even if some strict aliasing
rule gets violated.
After this patch, GCC is able to build all the selftests without
warning about potential strict aliasing issue.
bpf@vger discussion on strict aliasing and BPF selftests:
https://lore.kernel.org/bpf/[email protected]/T/#t
Tested in bpf-next master.
No regressions.
Signed-off-by: Jose E. Marchesi <[email protected]>
Signed-off-by: Daniel Borkmann <[email protected]>
Link: https://lore.kernel.org/bpf/[email protected]
Link: https://lore.kernel.org/bpf/[email protected]
|
|
To pick the changes from:
35e27a5744131996 ("fs: keep struct mnt_id_req extensible")
b4c2bea8ceaa50cd ("add listmount(2) syscall")
46eae99ef73302f9 ("add statmount(2) syscall")
That doesn't change anything in tools this time as nothing that is
harvested by the beauty scripts got changed:
$ ls -1 tools/perf/trace/beauty/*mount*sh
tools/perf/trace/beauty/fsmount.sh
tools/perf/trace/beauty/mount_flags.sh
tools/perf/trace/beauty/move_mount_flags.sh
$
This addresses this perf build warning.
Warning: Kernel ABI header differences:
diff -u tools/include/uapi/linux/mount.h include/uapi/linux/mount.h
Cc: Adrian Hunter <[email protected]>
Cc: Christian Brauner <[email protected]>
Cc: Ian Rogers <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Miklos Szeredi <[email protected]>
Cc: Namhyung Kim <[email protected]>
Link: https://lore.kernel.org/lkml/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
The 'Session topology' test currently fails with this message when
evlist__new_default() opens more than one event:
32: Session topology :
--- start ---
templ file: /tmp/perf-test-vv5YzZ
Using CPUID 0x00000000410fd070
Opening: unknown-hardware:HG
------------------------------------------------------------
perf_event_attr:
type 0 (PERF_TYPE_HARDWARE)
config 0xb00000000
disabled 1
------------------------------------------------------------
sys_perf_event_open: pid 0 cpu -1 group_fd -1 flags 0x8 = 4
Opening: unknown-hardware:HG
------------------------------------------------------------
perf_event_attr:
type 0 (PERF_TYPE_HARDWARE)
config 0xa00000000
disabled 1
------------------------------------------------------------
sys_perf_event_open: pid 0 cpu -1 group_fd -1 flags 0x8 = 5
non matching sample_type
FAILED tests/topology.c:73 can't get session
---- end ----
Session topology: FAILED!
This is because when re-opening the file and parsing the header, Perf
expects that any file that has more than one event has the sample ID
flag set. Perf record already sets the flag in a similar way when there
is more than one event, so add the same logic to evlist__new_default().
evlist__new_default() is only currently used in tests, so I don't
expect this change to have any other side effects. The other tests that
use it don't save and re-open the file so don't hit this issue.
The session topology test has been failing on Arm big.LITTLE platforms
since commit 251aa040244a3b17 ("perf parse-events: Wildcard most
"numeric" events") when evlist__new_default() started opening multiple
events for 'cycles'.
Fixes: 251aa040244a3b17 ("perf parse-events: Wildcard most "numeric" events")
Reviewed-by: Ian Rogers <[email protected]>
Signed-off-by: James Clark <[email protected]>
[ This was failing as well on a Rocket Lake Refresh/14700k Intel hybrid system - Arnaldo ]
Tested-by: Arnaldo Carvalho de Melo <[email protected]>
Tested-by: Ian Rogers <[email protected]>
Tested-by: Kan Liang <[email protected]>
Cc: Adrian Hunter <[email protected]>
Cc: Alexander Shishkin <[email protected]>
Cc: Changbin Du <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Mark Rutland <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Yang Jihong <[email protected]>
Closes: https://lore.kernel.org/lkml/CAP-5=fWVQ-7ijjK3-w1q+k2WYVNHbAcejb-xY0ptbjRw476VKA@mail.gmail.com/
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
This is to get the changes from:
94ea9c05219518ef ("x86/headers: Replace #include <asm/export.h> with #include <linux/export.h>")
10f4c9b9a33b7df0 ("x86/asm: Fix build of UML with KASAN")
That addresses these perf tools build warning:
Warning: Kernel ABI header differences:
diff -u tools/arch/x86/lib/memcpy_64.S arch/x86/lib/memcpy_64.S
diff -u tools/arch/x86/lib/memset_64.S arch/x86/lib/memset_64.S
Cc: Adrian Hunter <[email protected]>
Cc: Ian Rogers <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Masahiro Yamada <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Vincent Whitchurch <[email protected]>
Link: https://lore.kernel.org/lkml/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
Zen, APIC MSR fence changes
To pick the changes from:
1e536e10689700e0 ("x86/cpu: Detect TDX partial write machine check erratum")
765a0542fdc7aad7 ("x86/virt/tdx: Detect TDX during kernel boot")
30fa92832f405d5a ("x86/CPU/AMD: Add ZenX generations flags")
04c3024560d3a14a ("x86/barrier: Do not serialize MSR accesses on AMD")
This causes these perf files to be rebuilt and brings some X86_FEATURE
that will be used when updating the copies of
tools/arch/x86/lib/mem{cpy,set}_64.S with the kernel sources:
CC /tmp/build/perf/bench/mem-memcpy-x86-64-asm.o
CC /tmp/build/perf/bench/mem-memset-x86-64-asm.o
And addresses this perf build warning:
Warning: Kernel ABI header differences:
diff -u tools/arch/x86/include/asm/cpufeatures.h arch/x86/include/asm/cpufeatures.h
Cc: Adrian Hunter <[email protected]>
Cc: Borislav Petkov <[email protected]>
Cc: Dave Hansen <[email protected]>
Cc: Ian Rogers <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Kai Huang <[email protected]>
Cc: Namhyung Kim <[email protected]>
Link: https://lore.kernel.org/lkml/
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
The config file contains a partial kernel configuration to be used by
`virtme-configkernel --custom'. The presumption is that the config file
contains all Kconfig options needed by the selftests from the directory.
In net/forwarding/config, many are missing, which manifests as spurious
failures when running the selftests, with messages about unknown device
types, qdisc kinds or classifier actions. Add the missing configurations.
Tested the resulting configuration using virtme-ng as follows:
# vng -b -f tools/testing/selftests/net/forwarding/config
# vng --user root
(within the VM:)
# make -C tools/testing/selftests TARGETS=net/forwarding run_tests
Signed-off-by: Petr Machata <[email protected]>
Link: https://lore.kernel.org/r/025abded7ff9cea5874a7fe35dcd3fd41bf5e6ac.1706286755.git.petrm@nvidia.com
Signed-off-by: Paolo Abeni <[email protected]>
|
|
Modern OSes use iptables implementation with nf_tables as a backend,
e.g.:
$ iptables -V
iptables v1.8.8 (nf_tables)
Pablo points out that we need CONFIG_NFT_COMPAT to make that work,
otherwise we see a lot of:
Warning: Extension DNAT revision 0 not supported, missing kernel module?
with DNAT being just an example here, other modules we need
include udp, TTL, length etc.
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull misc fixes from Andrew Morton:
"22 hotfixes. 11 are cc:stable and the remainder address post-6.7
issues or aren't considered appropriate for backporting"
* tag 'mm-hotfixes-stable-2024-01-28-23-21' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (22 commits)
mm: thp_get_unmapped_area must honour topdown preference
mm: huge_memory: don't force huge page alignment on 32 bit
userfaultfd: fix mmap_changing checking in mfill_atomic_hugetlb
selftests/mm: ksm_tests should only MADV_HUGEPAGE valid memory
scs: add CONFIG_MMU dependency for vfree_atomic()
mm/memory: fix folio_set_dirty() vs. folio_mark_dirty() in zap_pte_range()
mm/huge_memory: fix folio_set_dirty() vs. folio_mark_dirty()
selftests/mm: Update va_high_addr_switch.sh to check CPU for la57 flag
selftests: mm: fix map_hugetlb failure on 64K page size systems
MAINTAINERS: supplement of zswap maintainers update
stackdepot: make fast paths lock-less again
stackdepot: add stats counters exported via debugfs
mm, kmsan: fix infinite recursion due to RCU critical section
mm/writeback: fix possible divide-by-zero in wb_dirty_limits(), again
selftests/mm: switch to bash from sh
MAINTAINERS: add man-pages git trees
mm: memcontrol: don't throttle dying tasks on memory.high
mm: mmap: map MAP_STACK to VM_NOHUGEPAGE
uprobes: use pagesize-aligned virtual address when replacing pages
selftests/mm: mremap_test: fix build warning
...
|
|
As CONFIG_DEBUG_INFO_BTF is default off the existing "failed to find
valid kernel BTF" message makes diagnosing the kernel build issue somewhat
cryptic. Add a little more detail with the hope of helping users.
Before:
```
libbpf: failed to find valid kernel BTF
libbpf: Error loading vmlinux BTF: -3
```
After not accessible:
```
libbpf: kernel BTF is missing at '/sys/kernel/btf/vmlinux', was CONFIG_DEBUG_INFO_BTF enabled?
libbpf: failed to find valid kernel BTF
libbpf: Error loading vmlinux BTF: -3
```
After not readable:
```
libbpf: failed to read kernel BTF from (/sys/kernel/btf/vmlinux): -1
```
Closes: https://lore.kernel.org/bpf/CAP-5=fU+DN_+Y=Y4gtELUsJxKNDDCOvJzPHvjUVaUoeFAzNnig@mail.gmail.com/
Signed-off-by: Ian Rogers <[email protected]>
Signed-off-by: Andrii Nakryiko <[email protected]>
Link: https://lore.kernel.org/bpf/[email protected]
|
|
Certain BPF selftests contain code that, albeit being legal C, trigger
warnings in GCC that cannot be disabled. This is the case for example
for the tests
progs/btf_dump_test_case_bitfields.c
progs/btf_dump_test_case_namespacing.c
progs/btf_dump_test_case_packing.c
progs/btf_dump_test_case_padding.c
progs/btf_dump_test_case_syntax.c
which contain struct type declarations inside function parameter
lists. This is problematic, because:
- The BPF selftests are built with -Werror.
- The Clang and GCC compilers sometimes differ when it comes to handle
warnings. in the handling of warnings. One compiler may emit
warnings for code that the other compiles compiles silently, and one
compiler may offer the possibility to disable certain warnings, while
the other doesn't.
In order to overcome this problem, this patch modifies the
tools/testing/selftests/bpf/Makefile in order to:
1. Enable the possibility of specifing per-source-file extra CFLAGS.
This is done by defining a make variable like:
<source-filename>-CFLAGS := <whateverflags>
And then modifying the proper Make rule in order to use these flags
when compiling <source-filename>.
2. Use the mechanism above to add -Wno-error to CFLAGS for the
following selftests:
progs/btf_dump_test_case_bitfields.c
progs/btf_dump_test_case_namespacing.c
progs/btf_dump_test_case_packing.c
progs/btf_dump_test_case_padding.c
progs/btf_dump_test_case_syntax.c
Note the corresponding -CFLAGS variables for these files are
defined only if the selftests are being built with GCC.
Note that, while compiler pragmas can generally be used to disable
particular warnings per file, this 1) is only possible for warning
that actually can be disabled in the command line, i.e. that have
-Wno-FOO options, and 2) doesn't apply to -Wno-error.
Tested in bpf-next master branch.
No regressions.
Signed-off-by: Jose E. Marchesi <[email protected]>
Signed-off-by: Daniel Borkmann <[email protected]>
Link: https://lore.kernel.org/bpf/[email protected]
|
|
In s390, CI reported that the sock_iter_batch selftest
hits this error very often:
2024-01-26T16:56:49.3091804Z Bind /proc/self/ns/net -> /run/netns/sock_iter_batch_netns failed: No such file or directory
2024-01-26T16:56:49.3149524Z Cannot remove namespace file "/run/netns/sock_iter_batch_netns": No such file or directory
2024-01-26T16:56:49.3772213Z test_sock_iter_batch:FAIL:ip netns add sock_iter_batch_netns unexpected error: 256 (errno 0)
It happens very often in s390 but Manu also noticed it happens very
sparsely in other arch also.
It turns out the default dash shell does not recognize "&>"
as a redirection operator, so the command went to the background.
In the sock_iter_batch selftest, the "ip netns delete" went
into background and then race with the following "ip netns add"
command.
This patch replaces the "&> /dev/null" usage with ">/dev/null 2>&1"
and does this redirection in the SYS_NOFAIL macro instead of doing
it individually by its caller. The SYS_NOFAIL callers do not care
about failure, so it is no harm to do this redirection even if
some of the existing callers do not redirect to /dev/null now.
It touches different test files, so I skipped the Fixes tags
in this patch. Some of the changed tests do not use "&>"
but they use the SYS_NOFAIL, so these tests are also
changed to avoid doing its own redirection because
SYS_NOFAIL does it internally now.
Signed-off-by: Martin KaFai Lau <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Alexei Starovoitov <[email protected]>
|
|
Adjust PERF_EVENT type enforcement around __arg_ctx to match exactly
what kernel is doing.
Fixes: 76ec90a996e3 ("libbpf: warn on unexpected __arg_ctx type when rewriting BTF")
Signed-off-by: Andrii Nakryiko <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Alexei Starovoitov <[email protected]>
|
|
Now that feature detection code is in bpf-next tree, integrate __arg_ctx
kernel-side support into kernel_supports() framework.
Signed-off-by: Andrii Nakryiko <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Alexei Starovoitov <[email protected]>
|
|
TEST_* functions append their own newline. Remove newlines from
TEST_* callsites to avoid extra newlines in output.
Signed-off-by: Andrew Jones <[email protected]>
Acked-by: Janosch Frank <[email protected]>
Acked-by: Claudio Imbrenda <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Sean Christopherson <[email protected]>
|
|
TEST_* functions append their own newline. Remove newlines from
TEST_* callsites to avoid extra newlines in output.
Signed-off-by: Andrew Jones <[email protected]>
Acked-by: Anup Patel <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Sean Christopherson <[email protected]>
|
|
TEST_* functions append their own newline. Remove newlines from
TEST_* callsites to avoid extra newlines in output.
Signed-off-by: Andrew Jones <[email protected]>
Acked-by: Zenghui Yu <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Sean Christopherson <[email protected]>
|
|
TEST_* functions append their own newline. Remove newlines from
TEST_* callsites to avoid extra newlines in output.
Signed-off-by: Andrew Jones <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Sean Christopherson <[email protected]>
|
|
Rework the NX hugepage test's skip message regarding the magic token to
provide all of the necessary magic, and to very explicitly recommended
using the wrapper shell script.
Opportunistically remove an overzealous newline; splitting the
recommendation message across two lines of ~45 characters makes it much
harder to read than running out a single line to 98 characters.
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Sean Christopherson <[email protected]>
|
|
lsm_{[gs]et_self_attr,list_modules} syscall numbers
To pick the changes in these csets:
d8b0f5465012538c ("wire up syscalls for statmount/listmount")
5f42375904b08890 ("LSM: wireup Linux Security Module syscalls")
Used in some architectures to create syscall tables.
This addresses this perf build warning:
Warning: Kernel ABI header differences:
diff -u tools/include/uapi/asm-generic/unistd.h include/uapi/asm-generic/unistd.h
Cc: Casey Schaufler <[email protected]>
Cc: Christian Brauner <[email protected]>
Cc: Miklos Szeredi <[email protected]>
Cc: Paul Moore <[email protected]>
Cc: Adrian Hunter <[email protected]>
Cc: Ian Rogers <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Namhyung Kim <[email protected]>
Link: https://lore.kernel.org/lkml/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
bpf_testmod_exit() does not need to have a return value (given the void),
so this patch drops this useless 'return' in it.
Signed-off-by: Geliang Tang <[email protected]>
Signed-off-by: Daniel Borkmann <[email protected]>
Acked-by: Jiri Olsa <[email protected]>
Link: https://lore.kernel.org/bpf/5765b287ea088f0c820f2a834faf9b20fb2f8215.1706442113.git.tanggeliang@kylinos.cn
|
|
Android implementation of libc errors out with -EINVAL in faccessat() if
passed AT_EACCESS ([0]), this leads to ridiculous issue with libbpf
refusing to load /sys/kernel/btf/vmlinux on Androids ([1]). Fix by
detecting Android and redefining AT_EACCESS to 0, it's equivalent on
Android.
[0] https://android.googlesource.com/platform/bionic/+/refs/heads/android13-release/libc/bionic/faccessat.cpp#50
[1] https://github.com/libbpf/libbpf-bootstrap/issues/250#issuecomment-1911324250
Fixes: 6a4ab8869d0b ("libbpf: Fix the case of running as non-root with capabilities")
Signed-off-by: Andrii Nakryiko <[email protected]>
Signed-off-by: Daniel Borkmann <[email protected]>
Acked-by: Jiri Olsa <[email protected]>
Link: https://lore.kernel.org/bpf/[email protected]
|
|
musl libc had the basename() prototype in string.h, but this is a
glibc-ism, now they removed the _GNU_SOURCE bits in their devel distro,
Alpine Linux edge:
https://git.musl-libc.org/cgit/musl/commit/?id=725e17ed6dff4d0cd22487bb64470881e86a92e7
So lets use the POSIX version, the whole rationale is spelled out at:
https://gitlab.alpinelinux.org/alpine/aports/-/issues/15643
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
Signed-off-by: Daniel Borkmann <[email protected]>
Acked-by: Jiri Olsa <[email protected]>
Acked-by: Quentin Monnet <[email protected]>
Link: https://lore.kernel.org/lkml/[email protected]
Link: https://lore.kernel.org/bpf/[email protected]
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/cxl/cxl
Pull cxl fixes from Dan Williams:
"A build regression fix, a device compatibility fix, and an original
bug preventing creation of large (16 device) interleave sets:
- Fix unit test build regression fallout from global
"missing-prototypes" change
- Fix compatibility with devices that do not support interrupts
- Fix overflow when calculating the capacity of large interleave sets"
* tag 'cxl-fixes-6.8-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/cxl/cxl:
cxl/region：Fix overflow issue in alloc_hpa()
cxl/pci: Skip irq features if MSI/MSI-X are not supported
tools/testing/nvdimm: Disable "missing prototypes / declarations" warnings
tools/testing/cxl: Disable "missing prototypes / declarations" warnings
|
|
As events are deduplicated by name, ensure PMU prefixes are always
used in metrics. Previously they may be missed on the first event in a
formula.
Update metric constraints for architectures with topdown l2 events.
Conversion script updated in:
https://github.com/intel/perfmon/pull/128
Reported-by: Arnaldo Carvalho de Melo <[email protected]>
Reviewed-by: Kan Liang <[email protected]>
Signed-off-by: Ian Rogers <[email protected]>
Tested-by: Arnaldo Carvalho de Melo <[email protected]>
Cc: Adrian Hunter <[email protected]>
Cc: Alexander Shishkin <[email protected]>
Cc: Edward Baker <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Mark Rutland <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Closes: https://lore.kernel.org/lkml/[email protected]/
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
To pick the changes in:
a5d3df8ae13fada7 ("KVM: remove deprecated UAPIs")
6d72283526090850 ("KVM x86/xen: add an override for PVCLOCK_TSC_STABLE_BIT")
89ea60c2c7b5838b ("KVM: x86: Add support for "protected VMs" that can utilize private memory")
8dd2eee9d526c30f ("KVM: x86/mmu: Handle page fault for private memory")
a7800aa80ea4d535 ("KVM: Add KVM_CREATE_GUEST_MEMFD ioctl() for guest-specific backing memory")
5a475554db1e476a ("KVM: Introduce per-page memory attributes")
16f95f3b95caded2 ("KVM: Add KVM_EXIT_MEMORY_FAULT exit to report faults to userspace")
bb58b90b1a8f753b ("KVM: Introduce KVM_SET_USER_MEMORY_REGION2")
3f9cd0ca848413fd ("KVM: arm64: Allow userspace to get the writable masks for feature ID registers")
That automatically adds support for some new ioctls and remove a bunch
of deprecated ones.
This ends up making the new binary to forget about the deprecated one,
so when used in an older system it will not be able to resolve those
codes to strings.
$ tools/perf/trace/beauty/kvm_ioctl.sh > before
$ cp include/uapi/linux/kvm.h tools/include/uapi/linux/kvm.h
$ tools/perf/trace/beauty/kvm_ioctl.sh > after
$ diff -u before after
--- before 2024-01-27 14:48:16.523014020 -0300
+++ after 2024-01-27 14:48:24.183932866 -0300
@@ -14,6 +14,7 @@
[0x46] = "SET_USER_MEMORY_REGION",
[0x47] = "SET_TSS_ADDR",
[0x48] = "SET_IDENTITY_MAP_ADDR",
+ [0x49] = "SET_USER_MEMORY_REGION2",
[0x60] = "CREATE_IRQCHIP",
[0x61] = "IRQ_LINE",
[0x62] = "GET_IRQCHIP",
@@ -22,14 +23,8 @@
[0x65] = "GET_PIT",
[0x66] = "SET_PIT",
[0x67] = "IRQ_LINE_STATUS",
- [0x69] = "ASSIGN_PCI_DEVICE",
[0x6a] = "SET_GSI_ROUTING",
- [0x70] = "ASSIGN_DEV_IRQ",
[0x71] = "REINJECT_CONTROL",
- [0x72] = "DEASSIGN_PCI_DEVICE",
- [0x73] = "ASSIGN_SET_MSIX_NR",
- [0x74] = "ASSIGN_SET_MSIX_ENTRY",
- [0x75] = "DEASSIGN_DEV_IRQ",
[0x76] = "IRQFD",
[0x77] = "CREATE_PIT2",
[0x78] = "SET_BOOT_CPU_ID",
@@ -66,7 +61,6 @@
[0x9f] = "GET_VCPU_EVENTS",
[0xa0] = "SET_VCPU_EVENTS",
[0xa3] = "ENABLE_CAP",
- [0xa4] = "ASSIGN_SET_INTX_MASK",
[0xa5] = "SIGNAL_MSI",
[0xa6] = "GET_XCRS",
[0xa7] = "SET_XCRS",
@@ -97,6 +91,8 @@
[0xcd] = "SET_SREGS2",
[0xce] = "GET_STATS_FD",
[0xd0] = "XEN_HVM_EVTCHN_SEND",
+ [0xd2] = "SET_MEMORY_ATTRIBUTES",
+ [0xd4] = "CREATE_GUEST_MEMFD",
[0xe0] = "CREATE_DEVICE",
[0xe1] = "SET_DEVICE_ATTR",
[0xe2] = "GET_DEVICE_ATTR",
$
This silences these perf build warnings:
Warning: Kernel ABI header differences:
diff -u tools/include/uapi/linux/kvm.h include/uapi/linux/kvm.h
diff -u tools/arch/x86/include/uapi/asm/kvm.h arch/x86/include/uapi/asm/kvm.h
Cc: Adrian Hunter <[email protected]>
Cc: Chao Peng <[email protected]>
Cc: Ian Rogers <[email protected]>
Cc: Jing Zhang <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Oliver Upton <[email protected]>
Cc: Paolo Bonzini <[email protected]>
Cc: Paul Durrant <[email protected]>
Cc: Sean Christopherson <[email protected]>
Link: https://lore.kernel.org/lkml/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next
Daniel Borkmann says:
====================
pull-request: bpf-next 2024-01-26
We've added 107 non-merge commits during the last 4 day(s) which contain
a total of 101 files changed, 6009 insertions(+), 1260 deletions(-).
The main changes are:
1) Add BPF token support to delegate a subset of BPF subsystem
functionality from privileged system-wide daemons such as systemd
through special mount options for userns-bound BPF fs to a trusted
& unprivileged application. With addressed changes from Christian
and Linus' reviews, from Andrii Nakryiko.
2) Support registration of struct_ops types from modules which helps
projects like fuse-bpf that seeks to implement a new struct_ops type,
from Kui-Feng Lee.
3) Add support for retrieval of cookies for perf/kprobe multi links,
from Jiri Olsa.
4) Bigger batch of prep-work for the BPF verifier to eventually support
preserving boundaries and tracking scalars on narrowing fills,
from Maxim Mikityanskiy.
5) Extend the tc BPF flavor to support arbitrary TCP SYN cookies to help
with the scenario of SYN floods, from Kuniyuki Iwashima.
6) Add code generation to inline the bpf_kptr_xchg() helper which
improves performance when stashing/popping the allocated BPF objects,
from Hou Tao.
7) Extend BPF verifier to track aligned ST stores as imprecise spilled
registers, from Yonghong Song.
8) Several fixes to BPF selftests around inline asm constraints and
unsupported VLA code generation, from Jose E. Marchesi.
9) Various updates to the BPF IETF instruction set draft document such
as the introduction of conformance groups for instructions,
from Dave Thaler.
10) Fix BPF verifier to make infinite loop detection in is_state_visited()
exact to catch some too lax spill/fill corner cases,
from Eduard Zingerman.
11) Refactor the BPF verifier pointer ALU check to allow ALU explicitly
instead of implicitly for various register types, from Hao Sun.
12) Fix the flaky tc_redirect_dtime BPF selftest due to slowness
in neighbor advertisement at setup time, from Martin KaFai Lau.
13) Change BPF selftests to skip callback tests for the case when the
JIT is disabled, from Tiezhu Yang.
14) Add a small extension to libbpf which allows to auto create
a map-in-map's inner map, from Andrey Grafin.
* tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: (107 commits)
selftests/bpf: Add missing line break in test_verifier
bpf, docs: Clarify definitions of various instructions
bpf: Fix error checks against bpf_get_btf_vmlinux().
bpf: One more maintainer for libbpf and BPF selftests
selftests/bpf: Incorporate LSM policy to token-based tests
selftests/bpf: Add tests for LIBBPF_BPF_TOKEN_PATH envvar
libbpf: Support BPF token path setting through LIBBPF_BPF_TOKEN_PATH envvar
selftests/bpf: Add tests for BPF object load with implicit token
selftests/bpf: Add BPF object loading tests with explicit token passing
libbpf: Wire up BPF token support at BPF object level
libbpf: Wire up token_fd into feature probing logic
libbpf: Move feature detection code into its own file
libbpf: Further decouple feature checking logic from bpf_object
libbpf: Split feature detectors definitions from cached results
selftests/bpf: Utilize string values for delegate_xxx mount options
bpf: Support symbolic BPF FS delegation mount options
bpf: Fail BPF_TOKEN_CREATE if no delegation option was set on BPF FS
bpf,selinux: Allocate bpf_security_struct per BPF token
selftests/bpf: Add BPF token-enabled tests
libbpf: Add BPF token support to bpf_prog_load() API
...
====================
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management fixes from Rafael Wysocki:
"These fix two cpufreq drivers and the cpupower utility.
Specifics:
- Fix the handling of scaling_max/min_freq sysfs attributes in the
AMD P-state cpufreq driver (Mario Limonciello)
- Make the intel_pstate cpufreq driver avoid unnecessary computation
of the HWP performance level corresponding to a given frequency in
the cases when it is known already, which also helps to avoid
reducing the maximum CPU capacity artificially on some systems
(Rafael J. Wysocki)
- Fix compilation of the cpupower utility when CFLAGS is passed as a
make argument for cpupower, but it does not take effect as expected
due to mishandling (Stanley Chan)"
* tag 'pm-6.8-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
cpufreq/amd-pstate: Fix setting scaling max/min freq values
cpufreq: intel_pstate: Refine computation of P-state for given frequency
tools cpupower bench: Override CFLAGS assignments
|
|
The gro.sh test-case relay on the gro_flush_timeout to ensure
that all the segments belonging to any given batch are properly
aggregated.
The other end, the sender is a user-space program transmitting
each packet with a separate write syscall. A busy host and/or
stracing the sender program can make the relevant segments reach
the GRO engine after the flush timeout triggers.
Give the GRO flush timeout more slack, to avoid sporadic self-tests
failures.
Fixes: 9af771d2ec04 ("selftests/net: allow GRO coalesce test on veth")
Signed-off-by: Paolo Abeni <[email protected]>
Reviewed-by: Eric Dumazet <[email protected]>
Tested-by: Eric Dumazet <[email protected]>
Link: https://lore.kernel.org/r/bffec2beab3a5672dd13ecabe4fad81d2155b367.1706206101.git.pabeni@redhat.com
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
the udpgro_fraglist self-test uses the BPF classifiers, but the
current net self-test configuration does not include it, causing
CI failures:
# selftests: net: udpgro_frglist.sh
# ipv6
# tcp - over veth touching data
# -l 4 -6 -D 2001:db8::1 -t rx -4 -t
# Error: TC classifier not found.
# We have an error talking to the kernel
# Error: TC classifier not found.
# We have an error talking to the kernel
Add the missing knob.
Fixes: edae34a3ed92 ("selftests net: add UDP GRO fraglist + bpf self-tests")
Signed-off-by: Paolo Abeni <[email protected]>
Reviewed-by: Maciej Żenczykowski <[email protected]>
Reviewed-by: Eric Dumazet <[email protected]>
Link: https://lore.kernel.org/r/7c3643763b331e9a400e1874fe089193c99a1c3f.1706170897.git.pabeni@redhat.com
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
The big_tcp test-case requires a few kernel knobs currently
not specified in the net selftests config, causing the
following failure:
# selftests: net: big_tcp.sh
# Error: Failed to load TC action module.
# We have an error talking to the kernel
...
# Testing for BIG TCP:
# CLI GSO | GW GRO | GW GSO | SER GRO
# ./big_tcp.sh: line 107: test: !=: unary operator expected
...
# on on on on : [FAIL_on_link1]
Add the missing configs
Fixes: 6bb382bcf742 ("selftests: add a selftest for big tcp")
Signed-off-by: Paolo Abeni <[email protected]>
Acked-by: Aaron Conole <[email protected]>
Acked-by: Xin Long <[email protected]>
Link: https://lore.kernel.org/all/21630ecea872fea13f071342ac64ef52a991a9b5.1706282943.git.pabeni@redhat.com/
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
There are no break lines in the test log for test_verifier #106 ~ #111
if jit is disabled, add the missing line break at the end of printf()
to fix it.
Without this patch:
[root@linux bpf]# echo 0 > /proc/sys/net/core/bpf_jit_enable
[root@linux bpf]# ./test_verifier 106
#106/p inline simple bpf_loop call SKIP (requires BPF JIT)Summary: 0 PASSED, 1 SKIPPED, 0 FAILED
With this patch:
[root@linux bpf]# echo 0 > /proc/sys/net/core/bpf_jit_enable
[root@linux bpf]# ./test_verifier 106
#106/p inline simple bpf_loop call SKIP (requires BPF JIT)
Summary: 0 PASSED, 1 SKIPPED, 0 FAILED
Fixes: 0b50478fd877 ("selftests/bpf: Skip callback tests if jit is disabled in test_verifier")
Signed-off-by: Tiezhu Yang <[email protected]>
Signed-off-by: Andrii Nakryiko <[email protected]>
Link: https://lore.kernel.org/bpf/[email protected]
|
|
KVM/riscv changes for 6.8 part #2
- Zbc extension support for Guest/VM
- Scalar crypto extensions support for Guest/VM
- Vector crypto extensions support for Guest/VM
- Zfh[min] extensions support for Guest/VM
- Zihintntl extension support for Guest/VM
- Zvfh[min] extensions support for Guest/VM
- Zfa extension support for Guest/VM
|
|
the definition of calloc is as follows:
void *calloc(size_t nmemb, size_t size);
number of members is in the first parameter and the size is in the
second parameter.
Fix error messages on gcc 14 20240102:
error: 'calloc' sizes specified with 'sizeof' in the earlier argument and
not in the later argument [-Werror=calloc-transposed-args]
Committer notes:
I noticed this on fedora 40 and rawhide.
Signed-off-by: Sun Haiyong <[email protected]>
Acked-by: Namhyung Kim <[email protected]>
Tested-by: Arnaldo Carvalho de Melo <[email protected]>
Cc: Adrian Hunter <[email protected]>
Cc: Alexander Shishkin <[email protected]>
Cc: Ian Rogers <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Mark Rutland <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Yanteng Si <[email protected]>
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
GCC 14 introduces a new -Walloc-size included in -Wextra which errors out
like:
builtin-top.c: In function ‘prompt_integer’:
builtin-top.c:360:21: error: allocation of insufficient size ‘0’ for
type ‘char’ with size ‘1’ [-Werror=alloc-size]
360 | char *buf = malloc(0), *p;
| ^~~~~~
Just set it to NULL, getline() will do the allocation.
Signed-off-by: Sun Haiyong <[email protected]>
Signed-off-by: Yanteng Si <[email protected]>
Cc: Adrian Hunter <[email protected]>
Cc: Alexander Shishkin <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Mark Rutland <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
The perf build failed due to the shellcheck on my machine (v0.4.6 on Ubuntu
18.04.1 LTS) doesn't support -a/--check-sourced and -S/--severity option.
These two options are introduced in shellcheck v0.4.7 and v0.6.0
respectively. So restrict the minimal version of shellcheck to v0.6.0.
Fixes: b809fc656e763296 ("perf build: Shellcheck support for OUTPUT directory")
Reviewed-by: Ian Rogers <[email protected]>
Signed-off-by: Yicong Yang <[email protected]>
Cc: Alexander Shishkin <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Junhao He <[email protected]>
Cc: Mark Rutland <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: [email protected]
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
DRM_IOCTL_MODE_CLOSEFB
Picking the changes from:
8570c27932e132d2 ("drm/syncobj: Add deadline support for syncobj waits")
9724ed6c1b1212d1 ("drm: Introduce DRM_CLIENT_CAP_CURSOR_PLANE_HOTSPOT")
e4d983acffff270c ("drm: introduce DRM_CAP_ATOMIC_ASYNC_PAGE_FLIP")
d208d875667e2a29 ("drm: introduce CLOSEFB IOCTL")
afa5cf3175a22b71 ("drm/i915/uapi: fix typos/spellos and punctuation")
Addressing these perf build warnings:
Warning: Kernel ABI header differences:
Now 'perf trace' and other code that might use the
tools/perf/trace/beauty autogenerated tables will be able to translate
this new ioctl command into a string:
$ tools/perf/trace/beauty/drm_ioctl.sh > before
$ cp include/uapi/drm/drm.h tools/include/uapi/drm/drm.h
$ tools/perf/trace/beauty/drm_ioctl.sh > after
$ diff -u before after
--- before 2024-01-26 10:54:23.486381862 -0300
+++ after 2024-01-26 10:54:35.767902442 -0300
@@ -109,6 +109,7 @@
[0xCD] = "SYNCOBJ_TIMELINE_SIGNAL",
[0xCE] = "MODE_GETFB2",
[0xCF] = "SYNCOBJ_EVENTFD",
+ [0xD0] = "MODE_CLOSEFB",
[DRM_COMMAND_BASE + 0x00] = "I915_INIT",
[DRM_COMMAND_BASE + 0x01] = "I915_FLUSH",
[DRM_COMMAND_BASE + 0x02] = "I915_FLIP",
$
Cc: Adrian Hunter <[email protected]>
Cc: Dmitry Baryshkov <[email protected]>
Cc: Ian Rogers <[email protected]>
Cc: Javier Martinez Canillas <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Randy Dunlap <[email protected]>
Cc: Rob Clark <[email protected]>
Cc: Simon Ser <[email protected]>
Cc: Tvrtko Ursulin <[email protected]>
Cc: Zack Rusin <[email protected]>
Link: https://lore.kernel.org/lkml/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
The daemon signal test sends signals and then expects files to be
written. It was observed on an Intel Alderlake that the signals were
sent too quickly leading to the 3 expected files not appearing.
To avoid this send the next signal only after the expected previous file
has appeared. To avoid an infinite loop the number of retries is
limited.
Signed-off-by: Ian Rogers <[email protected]>
Acked-by: Jiri Olsa <[email protected]>
Acked-by: Namhyung Kim <[email protected]>
Cc: Adrian Hunter <[email protected]>
Cc: Alexander Shishkin <[email protected]>
Cc: Athira Rajeev <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: Kajol Jain <[email protected]>
Cc: Kan Liang <[email protected]>
Cc: Mark Rutland <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Ravi Bangoria <[email protected]>
Cc: Ross Zwisler <[email protected]>
Cc: Shirisha G <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
"grep -cv" can exit with an error code that causes the "set -e" to abort
the script. Switch to using the grep exit code in the if condition to
avoid this.
Signed-off-by: Ian Rogers <[email protected]>
Acked-by: Namhyung Kim <[email protected]>
Cc: Adrian Hunter <[email protected]>
Cc: Alexander Shishkin <[email protected]>
Cc: Athira Rajeev <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Kajol Jain <[email protected]>
Cc: Kan Liang <[email protected]>
Cc: Mark Rutland <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Ravi Bangoria <[email protected]>
Cc: Ross Zwisler <[email protected]>
Cc: Shirisha G <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
Write the JSON output to a specific file to avoid debug output
breaking it.
Signed-off-by: Ian Rogers <[email protected]>
Acked-by: Namhyung Kim <[email protected]>
Cc: Adrian Hunter <[email protected]>
Cc: Alexander Shishkin <[email protected]>
Cc: Athira Rajeev <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Kajol Jain <[email protected]>
Cc: Kan Liang <[email protected]>
Cc: Mark Rutland <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Ravi Bangoria <[email protected]>
Cc: Ross Zwisler <[email protected]>
Cc: Shirisha G <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
Add an option to write the 'perf list' output to a specific file. This
can avoid issues with debug output being written into the output stream.
Signed-off-by: Ian Rogers <[email protected]>
Acked-by: Namhyung Kim <[email protected]>
Cc: Adrian Hunter <[email protected]>
Cc: Alexander Shishkin <[email protected]>
Cc: Athira Rajeev <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Kajol Jain <[email protected]>
Cc: Kan Liang <[email protected]>
Cc: Mark Rutland <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Ravi Bangoria <[email protected]>
Cc: Ross Zwisler <[email protected]>
Cc: Shirisha G <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
Using printf() can interrupt 'perf list output', use pr_err() which can
respect debug settings and the debug file.
Signed-off-by: Ian Rogers <[email protected]>
Acked-by: Namhyung Kim <[email protected]>
Cc: Adrian Hunter <[email protected]>
Cc: Alexander Shishkin <[email protected]>
Cc: Athira Rajeev <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Kajol Jain <[email protected]>
Cc: Kan Liang <[email protected]>
Cc: Mark Rutland <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Ravi Bangoria <[email protected]>
Cc: Ross Zwisler <[email protected]>
Cc: Shirisha G <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
In linux next repo, test case 'perf script tests' fails on s390.
The root case is a command line invocation of 'perf record' with
call-graph information. On s390 only DWARF formatted call-graphs are
supported and only on software events.
Change the command line parameters for s390.
Output before:
# perf test 89
89: perf script tests : FAILED!
#
Output after:
# perf test 89
89: perf script tests : Ok
#
Fixes: 0dd5041c9a0eaf8c ("perf addr_location: Add init/exit/copy functions")
Reviewed-by: Ian Rogers <[email protected]>
Signed-off-by: Thomas Richter <[email protected]>
Cc: Heiko Carstens <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Sumanth Korikkar <[email protected]>
Cc: Sven Schnelle <[email protected]>
Cc: Vasily Gorbik <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
To get the changes in:
8a924db2d7b5eb69 ("fs: Pass AT_GETATTR_NOSEC flag to getattr interface function")
That don't add anything that is handled by existing hard coded tables or
table generation scripts.
This silences this perf build warning:
Warning: Kernel ABI header differences:
diff -u tools/include/uapi/linux/fcntl.h include/uapi/linux/fcntl.h
Cc: Adrian Hunter <[email protected]>
Cc: Christian Brauner <[email protected]>
Cc: Ian Rogers <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Stefan Berger <[email protected]>
Link: https://lore.kernel.org/lkml/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
IA32_MKTME_KEYID_PARTITIONING
To pick up the changes in:
765a0542fdc7aad7 ("x86/virt/tdx: Detect TDX during kernel boot")
Addressing this tools/perf build warning:
Warning: Kernel ABI header differences:
diff -u tools/arch/x86/include/asm/msr-index.h arch/x86/include/asm/msr-index.h
That makes the beautification scripts to pick some new entries:
$ tools/perf/trace/beauty/tracepoints/x86_msr.sh > before
$ cp arch/x86/include/asm/msr-index.h tools/arch/x86/include/asm/msr-index.h
$ tools/perf/trace/beauty/tracepoints/x86_msr.sh > after
$ diff -u before after
--- before 2024-01-25 11:08:12.363223880 -0300
+++ after 2024-01-25 11:08:24.839307699 -0300
@@ -21,6 +21,7 @@
[0x0000004f] = "PPIN",
[0x00000060] = "LBR_CORE_TO",
[0x00000079] = "IA32_UCODE_WRITE",
+ [0x00000087] = "IA32_MKTME_KEYID_PARTITIONING",
[0x0000008b] = "AMD64_PATCH_LEVEL",
[0x0000008C] = "IA32_SGXLEPUBKEYHASH0",
[0x0000008D] = "IA32_SGXLEPUBKEYHASH1",
$
Now one can trace systemwide asking to see backtraces to where that MSR
is being read/written, see this example with a previous update:
# perf trace -e msr:*_msr/max-stack=32/ --filter="msr==IA32_MKTME_KEYID_PARTITIONING"
^C#
If we use -v (verbose mode) we can see what it does behind the scenes:
# perf trace -v -e msr:*_msr/max-stack=32/ --filter="msr==IA32_MKTME_KEYID_PARTITIONING"
Using CPUID GenuineIntel-6-8E-A
0x87
New filter for msr:read_msr: (msr==0x87) && (common_pid != 58627 && common_pid != 3792)
0x87
New filter for msr:write_msr: (msr==0x87) && (common_pid != 58627 && common_pid != 3792)
mmap size 528384B
^C#
Example with a frequent msr:
# perf trace -v -e msr:*_msr/max-stack=32/ --filter="msr==IA32_SPEC_CTRL" --max-events 2
Using CPUID AuthenticAMD-25-21-0
0x48
New filter for msr:read_msr: (msr==0x48) && (common_pid != 2612129 && common_pid != 3841)
0x48
New filter for msr:write_msr: (msr==0x48) && (common_pid != 2612129 && common_pid != 3841)
mmap size 528384B
Looking at the vmlinux_path (8 entries long)
symsrc__init: build id mismatch for vmlinux.
Using /proc/kcore for kernel data
Using /proc/kallsyms for symbols
0.000 Timer/2525383 msr:write_msr(msr: IA32_SPEC_CTRL, val: 6)
do_trace_write_msr ([kernel.kallsyms])
do_trace_write_msr ([kernel.kallsyms])
__switch_to_xtra ([kernel.kallsyms])
__switch_to ([kernel.kallsyms])
__schedule ([kernel.kallsyms])
schedule ([kernel.kallsyms])
futex_wait_queue_me ([kernel.kallsyms])
futex_wait ([kernel.kallsyms])
do_futex ([kernel.kallsyms])
__x64_sys_futex ([kernel.kallsyms])
do_syscall_64 ([kernel.kallsyms])
entry_SYSCALL_64_after_hwframe ([kernel.kallsyms])
__futex_abstimed_wait_common64 (/usr/lib64/libpthread-2.33.so)
0.030 :0/0 msr:write_msr(msr: IA32_SPEC_CTRL, val: 2)
do_trace_write_msr ([kernel.kallsyms])
do_trace_write_msr ([kernel.kallsyms])
__switch_to_xtra ([kernel.kallsyms])
__switch_to ([kernel.kallsyms])
__schedule ([kernel.kallsyms])
schedule_idle ([kernel.kallsyms])
do_idle ([kernel.kallsyms])
cpu_startup_entry ([kernel.kallsyms])
secondary_startup_64_no_verify ([kernel.kallsyms])
#
Cc: Adrian Hunter <[email protected]>
Cc: Dave Hansen <[email protected]>
Cc: Ian Rogers <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Kai Huang <[email protected]>
Cc: Namhyung Kim <[email protected]>
Link: https://lore.kernel.org/lkml/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
STATX_MNT_ID_UNIQUE
To pick the changes from:
98d2b43081972abe ("add unique mount ID")
That add STATX_MNT_ID_UNIQUE that was manually added to
tools/perf/trace/beauty/statx.c, at some point this should move to the
shell based automated way.
This silences this perf build warning:
Warning: Kernel ABI header differences:
diff -u tools/include/uapi/linux/stat.h include/uapi/linux/stat.h
Cc: Adrian Hunter <[email protected]>
Cc: Christian Brauner <[email protected]>
Cc: Ian Rogers <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Miklos Szeredi <[email protected]>
Cc: Namhyung Kim <[email protected]>
Link: https://lore.kernel.org/lkml/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
Add cfg80211, mac80211 and iwlwifi to the all_tests config
so that the unit tests (enabled by KUNIT_ALL_TESTS) will be
run by default.
Signed-off-by: Johannes Berg <[email protected]>
|