| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
No more tests were executed after a failure but it is still interesting
to get results for all the tests to better understand what's still OK
and what's not after a modification.
Now we only exit earlier if the two connections cannot be established.
Acked-by: Paolo Abeni <[email protected]>
Signed-off-by: Matthieu Baerts <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
No more tests were executed after a failure but it is still interesting
to get results for all the tests to better understand what's still OK
and what's not after a modification.
Now we only exit earlier if the basic tests are failing: no ping going
through namespaces or unable to transfer data on the loopback interface.
Acked-by: Paolo Abeni <[email protected]>
Signed-off-by: Matthieu Baerts <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
Add test cases for bridge backup port and backup nexthop ID, testing
both good and bad flows.
Example truncated output:
# ./test_bridge_backup_port.sh
[...]
Tests passed: 83
Tests failed: 0
Signed-off-by: Ido Schimmel <[email protected]>
Acked-by: Nikolay Aleksandrov <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
fixes coccinelle WARNING: Use ARRAY_SIZE
Signed-off-by: Mahmoud Maatuq <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
The test added in previous patch will fail with bpf_refcount_acquire
disabled. Until all races are fixed and bpf_refcount_acquire is
re-enabled on bpf-next, disable the test so CI doesn't complain.
Signed-off-by: Dave Marchevsky <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Alexei Starovoitov <[email protected]>
|
|
This patch adds a runnable version of one of the races described by
Kumar in [0]. Specifically, this interleaving:
(rbtree1 and list head protected by lock1, rbtree2 protected by lock2)
Prog A Prog B
======================================
n = bpf_obj_new(...)
m = bpf_refcount_acquire(n)
kptr_xchg(map, m)
m = kptr_xchg(map, NULL)
lock(lock2)
bpf_rbtree_add(rbtree2, m->r, less)
unlock(lock2)
lock(lock1)
bpf_list_push_back(head, n->l)
/* make n non-owning ref */
bpf_rbtree_remove(rbtree1, n->r)
unlock(lock1)
The above interleaving, the node's struct bpf_rb_node *r can be used to
add it to either rbtree1 or rbtree2, which are protected by different
locks. If the node has been added to rbtree2, we should not be allowed
to remove it while holding rbtree1's lock.
Before changes in the previous patch in this series, the rbtree_remove
in the second part of Prog A would succeed as the verifier has no way of
knowing which tree owns a particular node at verification time. The
addition of 'owner' field results in bpf_rbtree_remove correctly
failing.
The test added in this patch splits "Prog A" above into two separate BPF
programs - A1 and A2 - and uses a second mapval + kptr_xchg to pass n
from A1 to A2 similarly to the pass from A1 to B. If the test is run
without the fix applied, the remove will succeed.
Kumar's example had the two programs running on separate CPUs. This
patch doesn't do this as it's not necessary to exercise the broken
behavior / validate fixed behavior.
[0]: https://lore.kernel.org/bpf/d7hyspcow5wtjcmw4fugdgyp3fwhljwuscp3xyut5qnwivyeru@ysdq543otzv2
Signed-off-by: Dave Marchevsky <[email protected]>
Suggested-by: Kumar Kartikeya Dwivedi <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Alexei Starovoitov <[email protected]>
|
|
As described by Kumar in [0], in shared ownership scenarios it is
necessary to do runtime tracking of {rb,list} node ownership - and
synchronize updates using this ownership information - in order to
prevent races. This patch adds an 'owner' field to struct bpf_list_node
and bpf_rb_node to implement such runtime tracking.
The owner field is a void * that describes the ownership state of a
node. It can have the following values:
NULL - the node is not owned by any data structure
BPF_PTR_POISON - the node is in the process of being added to a data
structure
ptr_to_root - the pointee is a data structure 'root'
(bpf_rb_root / bpf_list_head) which owns this node
The field is initially NULL (set by bpf_obj_init_field default behavior)
and transitions states in the following sequence:
Insertion: NULL -> BPF_PTR_POISON -> ptr_to_root
Removal: ptr_to_root -> NULL
Before a node has been successfully inserted, it is not protected by any
root's lock, and therefore two programs can attempt to add the same node
to different roots simultaneously. For this reason the intermediate
BPF_PTR_POISON state is necessary. For removal, the node is protected
by some root's lock so this intermediate hop isn't necessary.
Note that bpf_list_pop_{front,back} helpers don't need to check owner
before removing as the node-to-be-removed is not passed in as input and
is instead taken directly from the list. Do the check anyways and
WARN_ON_ONCE in this unexpected scenario.
Selftest changes in this patch are entirely mechanical: some BTF
tests have hardcoded struct sizes for structs that contain
bpf_{list,rb}_node fields, those were adjusted to account for the new
sizes. Selftest additions to validate the owner field are added in a
further patch in the series.
[0]: https://lore.kernel.org/bpf/d7hyspcow5wtjcmw4fugdgyp3fwhljwuscp3xyut5qnwivyeru@ysdq543otzv2
Signed-off-by: Dave Marchevsky <[email protected]>
Suggested-by: Kumar Kartikeya Dwivedi <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Alexei Starovoitov <[email protected]>
|
|
When looking at the TC selftest reports, I noticed one test was failing
because /proc/net/nf_conntrack was not available.
not ok 373 3992 - Add ct action triggering DNAT tuple conflict
Could not match regex pattern. Verify command output:
cat: /proc/net/nf_conntrack: No such file or directory
It is only available if NF_CONNTRACK_PROCFS kconfig is set. So the issue
can be fixed simply by adding it to the list of required kconfig.
Fixes: e46905641316 ("tc-testing: add test for ct DNAT tuple collision")
Cc: [email protected]
Link: https://lore.kernel.org/netdev/[email protected]/T/ [1]
Signed-off-by: Matthieu Baerts <[email protected]>
Tested-by: Zhengchao Shao <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Acked-by: Jamal Hadi Salim <[email protected]>
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
When looking for something else in LKFT reports [1], I noticed most of
the tests were skipped because the "teardown stage" did not complete
successfully.
Pedro found out this is due to the fact CONFIG_NF_FLOW_TABLE is required
but not listed in the 'config' file. Adding it to the list fixes the
issues on LKFT side. CONFIG_NET_ACT_CT is now set to 'm' in the final
kconfig.
Fixes: c34b961a2492 ("net/sched: act_ct: Create nf flow table per zone")
Cc: [email protected]
Link: https://qa-reports.linaro.org/lkft/linux-next-master/build/next-20230711/testrun/18267241/suite/kselftest-tc-testing/test/tc-testing_tdc_sh/log [1]
Link: https://lore.kernel.org/netdev/[email protected]/T/ [2]
Suggested-by: Pedro Tammela <[email protected]>
Signed-off-by: Matthieu Baerts <[email protected]>
Tested-by: Zhengchao Shao <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Acked-by: Jamal Hadi Salim <[email protected]>
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
When looking for something else in LKFT reports [1], I noticed that the
TC selftest ended with a timeout error:
not ok 1 selftests: tc-testing: tdc.sh # TIMEOUT 45 seconds
The timeout had been introduced 3 years ago, see the Fixes commit below.
This timeout is only in place when executing the selftests via the
kselftests runner scripts. I guess this is not what most TC devs are
using and nobody noticed the issue before.
The new timeout is set to 15 minutes as suggested by Pedro [2]. It looks
like it is plenty more time than what it takes in "normal" conditions.
Fixes: 852c8cbf34d3 ("selftests/kselftest/runner.sh: Add 45 second timeout per test")
Cc: [email protected]
Link: https://qa-reports.linaro.org/lkft/linux-next-master/build/next-20230711/testrun/18267241/suite/kselftest-tc-testing/test/tc-testing_tdc_sh/log [1]
Link: https://lore.kernel.org/netdev/[email protected]/T/ [2]
Suggested-by: Pedro Tammela <[email protected]>
Signed-off-by: Matthieu Baerts <[email protected]>
Reviewed-by: Zhengchao Shao <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Acked-by: Jamal Hadi Salim <[email protected]>
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
Another test which now exercies the path of the verifier where it will
explore call chains rooted at the async callback. Without the prior
fixes, this program loads successfully, which is incorrect.
Signed-off-by: Kumar Kartikeya Dwivedi <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Alexei Starovoitov <[email protected]>
|
|
For both the d and e options in 'cpupower idle_set' command, an
atoi() conversion is done without checking if the input argument
is all numeric. So, an atoi conversion is done on any character
provided as input and the CPU idle_set operation continues with
that integer value, which may not be what is intended or entirely
correct.
The output of cpuidle-set before patch is as follows:
[root@xxx cpupower]# cpupower idle-set -e 1$
Idlestate 1 enabled on CPU 0
[snip]
Idlestate 1 enabled on CPU 47
[root@xxx cpupower]# cpupower idle-set -e 11
Idlestate 11 not available on CPU 0
[snip]
Idlestate 11 not available on CPU 47
[root@xxx cpupower]# cpupower idle-set -d 12
Idlestate 12 not available on CPU 0
[snip]
Idlestate 12 not available on CPU 47
[root@xxx cpupower]# cpupower idle-set -d qw
Idlestate 0 disabled on CPU 0
[snip]
Idlestate 0 disabled on CPU 47
This patch adds a check for both d and e options in cpuidle-set.c
to see that the idle_set value is all numeric before doing a
string-to-int conversion using strtol().
The output of cpuidle-set after the patch is as below:
[root@xxx cpupower]# ./cpupower idle-set -e 1$
Bad idle_set value: 1$. Integer expected
[root@xxx cpupower]# ./cpupower idle-set -e 11
Idlestate 11 not available on CPU 0
[snip]
Idlestate 11 not available on CPU 47
[root@xxx cpupower]# ./cpupower idle-set -d 12
Idlestate 12 not available on CPU 0
[snip]
Idlestate 12 not available on CPU 47
[root@xxx cpupower]# ./cpupower idle-set -d qw
Bad idle_set value: qw. Integer expected
Signed-off-by: Brahadambal Srinivasan <[email protected]>
Signed-off-by: Likhitha Korrapati <[email protected]>
Tested-by: Pavithra Prakash <[email protected]>
Reviewed-by: Rick Lindsley <[email protected]>
Signed-off-by: Shuah Khan <[email protected]>
|
|
If boost sysfs (/sys/devices/system/cpu/cpufreq/boost) file is present
turbo-boost is feature is supported in the hardware. By default this
feature should be enabled. But to disable/enable it write to the sysfs
file. Use the same to control this feature via cpupower.
To enable:
cpupower set --turbo-boost 1
To disable:
cpupower set --turbo-boost 0
Acked-by: Huang Rui <[email protected]>
Reviewed-by: Gautham R. Shenoy <[email protected]>
Reviewed-by: Mario Limonciello <[email protected]>
Signed-off-by: Wyes Karny <[email protected]>
Tested-by: Perry Yuan <[email protected]>
Signed-off-by: Shuah Khan <[email protected]>
|
|
amd_pstate supports changing of its mode dynamically via `status` sysfs
file. Add the same capability in cpupower. To change the mode to active
mode use below command:
cpupower set --amd-pstate-mode active
Acked-by: Huang Rui <[email protected]>
Reviewed-by: Gautham R. Shenoy <[email protected]>
Reviewed-by: Mario Limonciello <[email protected]>
Signed-off-by: Wyes Karny <[email protected]>
Tested-by: Perry Yuan <[email protected]>
Signed-off-by: Shuah Khan <[email protected]>
|
|
amd_pstate and intel_pstate active mode drivers support energy
performance preference feature. Through this user can convey it's
energy/performance preference to platform. Add this value change
capability to cpupower.
To change the EPP value use below command:
cpupower set --epp performance
Reviewed-by: Mario Limonciello <[email protected]>
Signed-off-by: Wyes Karny <[email protected]>
Tested-by: Perry Yuan <[email protected]>
Acked-by: Huang Rui <[email protected]>
Signed-off-by: Shuah Khan <[email protected]>
|
|
Add is_valid_path API to check whether the sysfs file is present or not.
Suggested-by: Gautham R. Shenoy <[email protected]>
Reviewed-by: Mario Limonciello <[email protected]>
Signed-off-by: Wyes Karny <[email protected]>
Tested-by: Perry Yuan <[email protected]>
Acked-by: Huang Rui <[email protected]>
Signed-off-by: Shuah Khan <[email protected]>
|
|
amd-pstate active mode driver name is "amd-pstate-epp". Use common
prefix for string matching condition to recognise amd-pstate active mode
driver.
Reviewed-by: Gautham R. Shenoy <[email protected]>
Signed-off-by: Wyes Karny <[email protected]>
Reviewed-by: Mario Limonciello <[email protected]>
Tested-by: Perry Yuan <[email protected]>
Acked-by: Huang Rui <[email protected]>
Signed-off-by: Shuah Khan <[email protected]>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/perf/perf-tools
Pull perf tools fixes from Arnaldo Carvalho de Melo:
- Don't group events when computing metrics that require more than the
maximum number of simultaneously enabled events on AMD systems.
- Fix multi CU handling in 'perf probe', add a 'perf test' entry to
regress test it.
- Make the 'perf test task_exit' stop generating samples by using the
'dummy' event, all it is testing is if a PERF_RECORD_EXIT is
generated at the end of a perf session. This makes this perf test to
stop sometimes failing on some systems due to a full ring buffer.
- Avoid SEGV if PMU lookup fails for legacy cache terms.
- Fix libsubcmd SEGV/use-after-free when commands aren't excluded.
- Fix OpenCSD (ARM64's CoreSight hardware tracing) library path
resolution when specifying CSLIBS= in the make command line.
- Fix broken feature check for libtracefs due to external lib changes,
use the provided pkgconfig file instead future proof it.
- Sync drm, fcntl, kvm, mount, prctl, socket, vhost, asound, arm64's
cputype headers with the kernel sources, in some cases this made the
tools become aware of new kernel APIs such as ioctls and the
cachestat sysctl.
* tag 'perf-tools-fixes-for-v6.5-1-2023-07-18' of git://git.kernel.org/pub/scm/linux/kernel/git/perf/perf-tools:
perf test task_exit: No need for a cycles event to check if we get an PERF_RECORD_EXIT
tools headers arm64: Sync arm64's cputype.h with the kernel sources
tools include UAPI: Sync the sound/asound.h copy with the kernel sources
tools include UAPI: Sync linux/vhost.h with the kernel sources
perf beauty: Update copy of linux/socket.h with the kernel sources
perf parse-events: Avoid SEGV if PMU lookup fails for legacy cache terms
libsubcmd: Avoid SEGV/use-after-free when commands aren't excluded
tools headers UAPI: Sync linux/prctl.h with the kernel sources
perf build: Fix broken feature check for libtracefs due to external lib changes
tools include UAPI: Sync linux/mount.h copy with the kernel sources
tools headers UAPI: Sync linux/kvm.h with the kernel sources
tools headers uapi: Sync linux/fcntl.h with the kernel sources
perf vendor events amd: Fix large metrics
perf build: Fix library not found error when using CSLIBS
tools headers UAPI: Sync files changed by new cachestat syscall with the kernel sources
tools headers UAPI: Sync drm/i915_drm.h with the kernel sources
perf probe: Read DWARF files from the correct CU
perf probe: Add test for regression introduced by switch to die_get_decl_file()
|
|
While it probably doesn't make a huge difference given the current KUnit
coverage we will get the best coverage of arm64 architecture features if
we specify -cpu=max rather than picking a specific CPU, this will include
all architecture features that qemu supports including many which have not
yet made it into physical implementations.
Due to performance issues emulating the architected pointer authentication
algorithm it is recommended to use the implementation defined algorithm
that qemu has instead, this should make no meaningful difference to the
coverage and will run the tests faster.
Signed-off-by: Mark Brown <[email protected]>
Reviewed-by: David Gow <[email protected]>
Signed-off-by: Shuah Khan <[email protected]>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull hotfixes from Andrew Morton:
"Seven hotfixes, six of which are cc:stable and one of which addresses
a post-6.5 issue"
* tag 'mm-hotfixes-stable-2023-07-18-12-28' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm:
maple_tree: fix node allocation testing on 32 bit
maple_tree: fix 32 bit mas_next testing
selftests/mm: mkdirty: fix incorrect position of #endif
maple_tree: set the node limit when creating a new root node
mm/mlock: fix vma iterator conversion of apply_vma_lock_flags()
prctl: move PR_GET_AUXV out of PR_MCE_KILL
selftests/mm: give scripts execute permission
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest
Pull Kselftest fixes from Shuah Khan:
"Fixes to bugs that are interfering with arm64 and risc workflows. Also
two fixes to timer and mincore tests that are causing test failures"
* tag 'linux-kselftest-fixes-6.5-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
selftests/arm64: fix build failure during the "emit_tests" step
selftests/riscv: fix potential build failure during the "emit_tests" step
tools: timers: fix freq average calculation
selftests/mincore: fix skip condition for check_huge_pages test
|
|
There was never a doubt in my mind that they would not fit into a single
u32 eventually.
Signed-off-by: Borislav Petkov (AMD) <[email protected]>
|
|
The benchmark is similar to the pipe benchmark. It creates two processes,
one is calling syscalls, and another process is handling them via seccomp
user notifications. It measures the time required to run a specified number
of interations.
$ ./perf bench sched seccomp-notify --sync-mode --loop 1000000
# Running 'sched/seccomp-notify' benchmark:
# Executed 1000000 system calls
Total time: 2.769 [sec]
2.769629 usecs/op
361059 ops/sec
$ ./perf bench sched seccomp-notify
# Running 'sched/seccomp-notify' benchmark:
# Executed 1000000 system calls
Total time: 8.571 [sec]
8.571119 usecs/op
116670 ops/sec
Signed-off-by: Andrei Vagin <[email protected]>
Acked-by: "Peter Zijlstra (Intel)" <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Link: https://lore.kernel.org/r/[email protected]
[kees: Added PRIu64 format string]
Signed-off-by: Kees Cook <[email protected]>
|
|
Test output:
# RUN global.user_notification_sync ...
# OK global.user_notification_sync
ok 51 global.user_notification_sync
Signed-off-by: Andrei Vagin <[email protected]>
Acked-by: "Peter Zijlstra (Intel)" <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Kees Cook <[email protected]>
|
|
Internal node counting was altered and the 64 bit test was updated,
however the 32bit test was missed.
Restore the 32bit test to a functional state.
Link: https://lore.kernel.org/linux-mm/CAMuHMdV4T53fOw7VPoBgPR7fP6RYqf=CBhD_y_vOg53zZX_DnA@mail.gmail.com/
Link: https://lkml.kernel.org/r/[email protected]
Fixes: 541e06b772c1 ("maple_tree: remove GFP_ZERO from kmem_cache_alloc() and kmem_cache_alloc_bulk()")
Signed-off-by: Liam R. Howlett <[email protected]>
Cc: <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
|
|
The #endif is the wrong side of a } causing a build failure when
__NR_userfaultfd is not defined. Fix this by moving the #end to enclose
the }
Link: https://lkml.kernel.org/r/[email protected]
Fixes: 9eac40fc0cc7 ("selftests/mm: mkdirty: test behavior of (pte|pmd)_mkdirty on VMAs without write permissions")
Signed-off-by: Colin Ian King <[email protected]>
Reviewed-by: David Hildenbrand <[email protected]>
Cc: Shuah Khan <[email protected]>
Cc: <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
|
|
PERF_RECORD_EXIT
The intent of this test is to check we get a PERF_RECORD_EXIT as asked
for by setting perf_event_attr.task=1.
When the test was written we didn't had the "dummy" event so we went
with the default event, "cycles".
There were reports of this test failing sometimes, one of these reports
was with a PREEMPT_RT_FULL, but I noticed it failing sometimes with an
aarch64 Firefly board.
In the kernel the call to perf_event_task_output(), that generates the
PERF_RECORD_EXIT may fail when there is not enough memory in the ring
buffer, if the ring buffer is paused, etc.
So switch to using the "dummy" event to use the ring buffer just for
what the test was designed for, avoiding uneeded PERF_RECORD_SAMPLEs.
Acked-by: Ian Rogers <[email protected]>
Cc: Adrian Hunter <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Juri Lelli <[email protected]>
Cc: Namhyung Kim <[email protected]>
Link: https://lore.kernel.org/lkml/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull objtool fixes from Borislav Petkov:
- Mark copy_iovec_from_user() __noclone in order to prevent gcc from
doing an inter-procedural optimization and confuse objtool
- Initialize struct elf fully to avoid build failures
* tag 'objtool_urgent_for_v6.5_rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
iov_iter: Mark copy_iovec_from_user() noclone
objtool: initialize all of struct elf
|
|
KCSAN enables some Kconfig options unilaterally and unconditionally,
including CONFIG_PROVE_LOCKING. This in turn enables CONFIG_PROVE_RCU
and CONFIG_PREEMPT_COUNT, which conflicts with constraints in SRCU-T,
TRACE01, and TREE10, which in turn causes rcutorture to emit spurious
configuration complaints. This commit therefore forgives configuration
complaints involving CONFIG_PROVE_RCU and CONFIG_PREEMPT_COUNT.
Signed-off-by: Paul E. McKenney <[email protected]>
|
|
If some of the torture.sh runs had config and/or build errors, but all
runs for which kernels were built ran successfully to completion, then
torture.sh will incorrectly claim that all errors were KCSAN errors.
This commit therefore makes torture.sh print the number of runs with
config and build errors, and to refrain from claiming that all bugs were
KCSAN bugs in that case.
Signed-off-by: Paul E. McKenney <[email protected]>
|
|
Currently, the kernel boot parameters specified by the kvm.sh --bootargs
parameter are placed near the beginning of the -append list that is
passed to qemu. This means that in the not-uncommon case of a kernel
boot parameter where the last argument wins, the --bootargs list overrides
neither the list in the .boot file nor the additional parameters supplied
by the rcutorture scripting.
This commit therefore places the kernel boot parameters specified by
the kvm.sh --bootargs parameter at the end of qemu's -append list.
Signed-off-by: Paul E. McKenney <[email protected]>
|
|
The mkinitrd.sh script no longer takes an argument, so this commit
therefore removes the code that checks for the parameter being present.
Signed-off-by: Paul E. McKenney <[email protected]>
Reviewed-by: Frederic Weisbecker <[email protected]>
|
|
Currently, if the initial ssh fails, kvm-remote.sh gives up, printing a
message saying so. But it would be nice to get a better idea as to why
ssh failed. This commit therefore dumps out ssh's exit code, stdout,
and stderr upon ssh failure for diagnostic purposes.
Signed-off-by: Paul E. McKenney <[email protected]>
|
|
This commit adds build tests of the individual RCU Tasks flavors in
order to detect inadvertent dependencies among the flavors.
Reported-by: Arnd Bergmann <[email protected]>
Signed-off-by: Paul E. McKenney <[email protected]>
|
|
Currently, kvm-recheck.sh will print out any .config errors with messages
of the form:
:CONFIG_TASKS_TRACE_RCU=y: improperly set
However, if these are the only errors, the resulting exit code will
declare the run successful. This commit therefore causes kvm-recheck.sh
to record .config errors in the results directory in a file named
ConfigFragment.diags and also returns a non-zero error code in that case.
Signed-off-by: Paul E. McKenney <[email protected]>
|
|
Testing building of a given RCU Tasks flavor with the other two
flavors disabled requires checking that the other two flavors are in
fact disabled. This commit therefore modifies the scripting to permit
things like "#CHECK#CONFIG_TASKS_TRACE_RCU=n" to be passed into the
kvm.sh script's --kconfig parameter.
Signed-off-by: Paul E. McKenney <[email protected]>
|
|
The TASKS03 scenario specifies both CONFIG_RCU_EXPERT=y and
removes #CHECK#CONFIG_RCU_EXPERT=n in order to be consistent with
CONFIG_RCU_EXPERT=y prerequisites.
Signed-off-by: Paul E. McKenney <[email protected]>
|
|
In order to (for example) omit the real-time testing that torture.sh would
otherwise carry out, you put "--do-no-rt" on the torture.sh command line.
This works, but it is all too easy to instead type "--no-rt". This is
unambiguous and easier to type, so this commit therefore allows all
"--no-" arguments as synonyms for their "--do-no-" counterparts.
Signed-off-by: Paul E. McKenney <[email protected]>
|
|
The CBMC-based formal-verification testing for SRCU was quite the thing
back in 2016, but the problem is that SRCU changes too quickly for the
scripting to keep up. In addition, more recently, SRCU's grace-period
ordering has been formally modeled by a group of Linux-kernel memory-model
litmus tests.
This commit therefore removes the pioneering formal-verification tests.
Signed-off-by: Paul E. McKenney <[email protected]>
|
|
Now that the BOOTPARAM_HOTPLUG_CPU0 Kconfig option is in the process of
being removed, it is time to remove rcutorture's use of it.
Link: https://lore.kernel.org/lkml/[email protected]/
Signed-off-by: Paul E. McKenney <[email protected]>
Cc: Thomas Gleixner <[email protected]>
Cc: <[email protected]>
|
|
It is no longer possible to build a kernel with a preemption-disabled
RCU without use of CONFIG_PREEMPT_DYNAMIC=n. This commit therefore
adds CONFIG_PREEMPT_DYNAMIC=n to the scf torture type's NOPREEMPT
scenario file.
Signed-off-by: Paul E. McKenney <[email protected]>
|
|
As the number of CPUs increases, the number of outstanding no-wait
smp_call_function() handlers also increases, so that the default of
2G of memory is not always sufficient on 80-CPU systems. This commit
therefore scales the amount of memory specified to qemu based on the
number of CPUs specified to the scftorture test instance.
Signed-off-by: Paul E. McKenney <[email protected]>
|
|
It is no longer possible to build a kernel with a preemption-disabled
RCU without use of CONFIG_PREEMPT_DYNAMIC=n. This commit therefore
adds CONFIG_PREEMPT_DYNAMIC=n to the rcuscale torture type's TRACE01
scenario file.
Signed-off-by: Paul E. McKenney <[email protected]>
|
|
Add a "tasks-rude" option to the rcuscale.scale_type module parameter.
Signed-off-by: Paul E. McKenney <[email protected]>
|
|
This commit prints out the CPU time consumed by the grace-period kthread,
if the specified RCU flavor supports this notion.
Signed-off-by: Paul E. McKenney <[email protected]>
|
|
It is no longer possible to build a kernel with a preemption-disabled
RCU without use of CONFIG_PREEMPT_DYNAMIC=n. This commit therefore
adds CONFIG_PREEMPT_DYNAMIC=n to the refscale torture type's NOPREEMPT
scenario file.
Signed-off-by: Paul E. McKenney <[email protected]>
|
|
The build failure reported in [1] occurred because commit <9fc96c7c19df>
("selftests: error out if kernel header files are not yet built") added
a new "kernel_header_files" dependency to "all", and that triggered
another, pre-existing problem. Specifically, the arm64 selftests
override the emit_tests target, and that override improperly declares
itself to depend upon the "all" target.
This is a problem because the "emit_tests" target in lib.mk was not
intended to be overridden. emit_tests is a very simple, sequential build
target that was originally invoked from the "install" target, which in
turn, depends upon "all".
That approach worked for years. But with 9fc96c7c19df in place,
emit_tests failed, because it does not set up all of the elaborate
things that "install" does. And that caused the new
"kernel_header_files" target (which depends upon $(KBUILD_OUTPUT) being
correct) to fail.
Some detail: The "all" target is .PHONY. Therefore, each target that
depends on "all" will cause it to be invoked again, and because
dependencies are managed quite loosely in the selftests Makefiles, many
things will run, even "all" is invoked several times in immediate
succession. So this is not a "real" failure, as far as build steps go:
everything gets built, but "all" reports a problem when invoked a second
time from a bad environment.
To fix this, simply remove the unnecessary "all" dependency from the
overridden emit_tests target. The dependency is still effectively
honored, because again, invocation is via "install", which also depends
upon "all".
An alternative approach would be to harden the emit_tests target so that
it can depend upon "all", but that's a lot more complicated and hard to
get right, and doesn't seem worth it, especially given that emit_tests
should probably not be overridden at all.
[1] https://lore.kernel.org/[email protected]
Fixes: 9fc96c7c19df ("selftests: error out if kernel header files are not yet built")
Reported-by: Mark Brown <[email protected]>
Signed-off-by: John Hubbard <[email protected]>
Tested-by: Mark Brown <[email protected]>
Signed-off-by: Shuah Khan <[email protected]>
|
|
The riscv selftests (which were modeled after the arm64 selftests) are
improperly declaring the "emit_tests" target to depend upon the "all"
target. This approach, when combined with commit 9fc96c7c19df
("selftests: error out if kernel header files are not yet built"), has
caused build failures [1] on arm64, and is likely to cause similar
failures for riscv.
To fix this, simply remove the unnecessary "all" dependency from the
emit_tests target. The dependency is still effectively honored, because
again, invocation is via "install", which also depends upon "all".
An alternative approach would be to harden the emit_tests target so that
it can depend upon "all", but that's a lot more complicated and hard to
get right, and doesn't seem worth it, especially given that emit_tests
should probably not be overridden at all.
[1] https://lore.kernel.org/[email protected]
Fixes: 9fc96c7c19df ("selftests: error out if kernel header files are not yet built")
Signed-off-by: John Hubbard <[email protected]>
Tested-by: Alexandre Ghiti <[email protected]>
Signed-off-by: Shuah Khan <[email protected]>
|
|
When run under run_vmtests.sh, test scripts were failing to run with
"permission denied" due to the scripts not being executable.
It is also annoying not to be able to directly invoke run_vmtests.sh,
which is solved by giving also it the execute permission.
Link: https://lkml.kernel.org/r/[email protected]
Signed-off-by: Ryan Roberts <[email protected]>
Cc: SeongJae Park <[email protected]>
Cc: David Hildenbrand <[email protected]>
Cc: Florent Revest <[email protected]>
Cc: Jérôme Glisse <[email protected]>
Cc: John Hubbard <[email protected]>
Cc: Liam R. Howlett <[email protected]>
Cc: Mark Brown <[email protected]>
Cc: Shuah Khan <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
|
|
To get the changes in:
e910baa9c1efdf76 ("KVM: arm64: vgic: Add Apple M2 PRO/MAX cpus to the list of broken SEIS implementations")
That makes this perf source code to be rebuilt:
CC /tmp/build/perf-tools/util/arm-spe.o
The changes in the above patch don't affect things that are used in
arm-spe.c (things like MIDR_NEOVERSE_N1, etc). Unsure if Apple M2 has
SPE (Statistical Profiling Extension) :-)
That addresses this perf build warning:
Warning: Kernel ABI header differences:
diff -u tools/arch/arm64/include/asm/cputype.h arch/arm64/include/asm/cputype.h
Cc: Adrian Hunter <[email protected]>
Cc: Ali Saidi <[email protected]>
Cc: Ian Rogers <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Leo Yan <[email protected]>
Cc: Marc Zyngier <[email protected]>
Cc: Namhyung Kim <[email protected]>
Link: https://lore.kernel.org/lkml/
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|