| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Add unit tests for movsx insns.
Signed-off-by: Yonghong Song <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Alexei Starovoitov <[email protected]>
|
|
Add unit tests for new ldsx insns. The test includes sign-extension
with a single value or with a value range.
If cpuv4 is not supported due to
(1) older compiler, e.g., less than clang version 18, or
(2) test runner test_progs and test_progs-no_alu32 which tests
cpu v2 and v3, or
(3) non-x86_64 arch not supporting new insns in jit yet,
a dummy program is added with below output:
#318/1 verifier_ldsx/cpuv4 is not supported by compiler or jit, use a dummy test:OK
#318 verifier_ldsx:OK
to indicate the test passed with a dummy test instead of actually
testing cpuv4. I am using a dummy prog to avoid changing the
verifier testing infrastructure. Once clang 18 is widely available
and other architectures support cpuv4, at least for CI run,
the dummy program can be removed.
Signed-off-by: Yonghong Song <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Alexei Starovoitov <[email protected]>
|
|
Similar to no-alu32 runner, if clang compiler supports -mcpu=v4,
a cpuv4 runner is created to test bpf programs compiled with
-mcpu=v4.
The following are some num-of-insn statistics for each newer
instructions based on existing selftests, excluding subsequent
cpuv4 insn specific tests.
insn pattern # of instructions
reg = (s8)reg 4
reg = (s16)reg 4
reg = (s32)reg 144
reg = *(s8 *)(reg + off) 13
reg = *(s16 *)(reg + off) 14
reg = *(s32 *)(reg + off) 15215
reg = bswap16 reg 142
reg = bswap32 reg 38
reg = bswap64 reg 14
reg s/= reg 0
reg s%= reg 0
gotol <offset> 58
Note that in llvm -mcpu=v4 implementation, the compiler is a little
bit conservative about generating 'gotol' insn (32-bit branch offset)
as it didn't precise count the number of insns (e.g., some insns are
debug insns, etc.). Compared to old 'goto' insn, newer 'gotol' insn
should have comparable verification states to 'goto' insn.
With current patch set, all selftests passed with -mcpu=v4
when running test_progs-cpuv4 binary. The -mcpu=v3 and -mcpu=v2 run
are also successful.
Signed-off-by: Yonghong Song <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Alexei Starovoitov <[email protected]>
|
|
The following test_verifier subtest failed due to
new encoding for BSWAP.
$ ./test_verifier
...
#99/u invalid 64-bit BPF_END FAIL
Unexpected success to load!
verification time 215 usec
stack depth 0
processed 3 insns (limit 1000000) max_states_per_insn 0 total_states 0 peak_states 0 mark_read 0
#99/p invalid 64-bit BPF_END FAIL
Unexpected success to load!
verification time 198 usec
stack depth 0
processed 3 insns (limit 1000000) max_states_per_insn 0 total_states 0 peak_states 0 mark_read 0
Tighten the test so it still reports a failure.
Acked-by: Eduard Zingerman <[email protected]>
Signed-off-by: Yonghong Song <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Alexei Starovoitov <[email protected]>
|
|
Add interpreter/jit support for new sign-extension load insns
which adds a new mode (BPF_MEMSX).
Also add verifier support to recognize these insns and to
do proper verification with new insns. In verifier, besides
to deduce proper bounds for the dst_reg, probed memory access
is also properly handled.
Acked-by: Eduard Zingerman <[email protected]>
Signed-off-by: Yonghong Song <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Alexei Starovoitov <[email protected]>
|
|
Cross-merge networking fixes after downstream PR.
No conflicts or adjacent changes.
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Paolo Abeni:
"Including fixes from can, netfilter.
Current release - regressions:
- core: fix splice_to_socket() for O_NONBLOCK socket
- af_unix: fix fortify_panic() in unix_bind_bsd().
- can: raw: fix lockdep issue in raw_release()
Previous releases - regressions:
- tcp: reduce chance of collisions in inet6_hashfn().
- netfilter: skip immediate deactivate in _PREPARE_ERROR
- tipc: stop tipc crypto on failure in tipc_node_create
- eth: igc: fix kernel panic during ndo_tx_timeout callback
- eth: iavf: fix potential deadlock on allocation failure
Previous releases - always broken:
- ipv6: fix bug where deleting a mngtmpaddr can create a new
temporary address
- eth: ice: fix memory management in ice_ethtool_fdir.c
- eth: hns3: fix the imp capability bit cannot exceed 32 bits issue
- eth: vxlan: calculate correct header length for GPE
- eth: stmmac: apply redundant write work around on 4.xx too"
* tag 'net-6.5-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (49 commits)
tipc: stop tipc crypto on failure in tipc_node_create
af_unix: Terminate sun_path when bind()ing pathname socket.
tipc: check return value of pskb_trim()
benet: fix return value check in be_lancer_xmit_workarounds()
virtio-net: fix race between set queues and probe
net/sched: mqprio: Add length check for TCA_MQPRIO_{MAX/MIN}_RATE64
splice, net: Fix splice_to_socket() for O_NONBLOCK socket
net: fec: tx processing does not call XDP APIs if budget is 0
mptcp: more accurate NL event generation
selftests: mptcp: join: only check for ip6tables if needed
tools: ynl-gen: fix parse multi-attr enum attribute
tools: ynl-gen: fix enum index in _decode_enum(..)
netfilter: nf_tables: disallow rule addition to bound chain via NFTA_RULE_CHAIN_ID
netfilter: nf_tables: skip immediate deactivate in _PREPARE_ERROR
netfilter: nft_set_rbtree: fix overlap expiration walk
igc: Fix Kernel Panic during ndo_tx_timeout callback
net: dsa: qca8k: fix mdb add/del case with 0 VID
net: dsa: qca8k: fix broken search_and_del
net: dsa: qca8k: fix search_and_insert wrong handling of new rule
net: dsa: qca8k: enable use_single_write for qca8xxx
...
|
|
On a system with both SVE and SME when we change one of the VLs this should
not result in a change in the other VL. Add a check that this is in fact
the case to vec-syscfg.
Signed-off-by: Mark Brown <[email protected]>
Link: https://lore.kernel.org/r/20230720-arm64-fix-sve-sme-vl-change-v2-3-8eea06b82d57@kernel.org
Signed-off-by: Will Deacon <[email protected]>
|
|
We just fixed an issue where changing the SVE VL while SME was active could
result in us attempting to save the streaming mode SVE vectors without any
backing storage. Add a test case which provokes that issue, ideally we
should also verify that the contents of ZA are unaffected by any of what we
did.
Note that since we need to keep streaming mode enabled we can't use any
syscalls to trigger the issue, we have to sit in a loop in usersapce and
hope to be preempted. The chosen numbers trigger with defconfig on all the
virtual platforms for me, this won't be 100% on all systems but avoid an
overcomplicated test implementation.
Signed-off-by: Mark Brown <[email protected]>
Link: https://lore.kernel.org/r/20230720-arm64-fix-sve-sme-vl-change-v2-2-8eea06b82d57@kernel.org
Signed-off-by: Will Deacon <[email protected]>
|
|
This adds MSG_PEEK test for SOCK_SEQPACKET. It works in the same way as
SOCK_STREAM test, except it also tests MSG_TRUNC flag.
Signed-off-by: Arseniy Krasnov <[email protected]>
Reviewed-by: Stefano Garzarella <[email protected]>
Acked-by: Michael S. Tsirkin <[email protected]>
Signed-off-by: Paolo Abeni <[email protected]>
|
|
This new version makes test more complicated by adding empty read,
partial read and data comparisons between MSG_PEEK and normal reads.
Signed-off-by: Arseniy Krasnov <[email protected]>
Reviewed-by: Stefano Garzarella <[email protected]>
Acked-by: Michael S. Tsirkin <[email protected]>
Signed-off-by: Paolo Abeni <[email protected]>
|
|
Prior to this change, events without a group would be sorted as if they
were from the location of the first event without a group. For example
instructions and cycles are without a group:
instructions,{imc_free_running/data_read/,imc_free_running/data_write/},cycles
parse events would create an eventual evlist like:
instructions,cycles,{uncore_imc_free_running_0/data_read/,uncore_imc_free_running_1/data_read/,uncore_imc_free_running_0/data_write/,uncore_imc_free_running_1/data_write/}
This is done so that perf metric events, that must always be in a
group, will be adjacent and so can be forced into a group.
This change modifies the sorting so that only force grouped events,
like perf metrics, are sorted and all other events keep their position
with respect to groups in the evlist. The location of the force
grouped event is chosen to match the first force grouped event.
For architectures without force grouped events, ie anything not Intel
Icelake or newer, this should mean sorting and fixing doesn't modify
the event positions except when fixing the grouping for PMUs of things
like uncore events.
Fixes: 347c2f0a0988c59c ("perf parse-events: Sort and group parsed events")
Reported-by: Andi Kleen <[email protected]>
Signed-off-by: Ian Rogers <[email protected]>
Tested-by: Andi Kleen <[email protected]>
Cc: Adrian Hunter <[email protected]>
Cc: Alexander Shishkin <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Kan Liang <[email protected]>
Cc: Mark Rutland <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Xing Zhengjun <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
The evsel grouping fix iterates over evsels tracking the leader group
and the current position's group, updating the current position's leader
if an evsel is being forced into a group or groups changed. However,
groups changing isn't a sufficient condition as sorting may have
reordered events and the leader may no longer come first. For this
reason update all leaders whenever they disagree.
This change breaks certain Icelake+ metrics due to bugs in the
kernel. For example, tma_l3_bound with threshold enabled tries to
program the events:
{topdown-retiring,slots,CYCLE_ACTIVITY.STALLS_L2_MISS,topdown-fe-bound,EXE_ACTIVITY.BOUND_ON_STORES,EXE_ACTIVITY.1_PORTS_UTIL,topdown-be-bound,cpu/INT_MISC.RECOVERY_CYCLES,cmask=1,edge/,CYCLE_ACTIVITY.STALLS_L3_MISS,CPU_CLK_UNHALTED.THREAD,CYCLE_ACTIVITY.STALLS_MEM_ANY,EXE_ACTIVITY.2_PORTS_UTIL,CYCLE_ACTIVITY.STALLS_TOTAL,topdown-bad-spec}:W
fixing the perf metric event order gives:
{slots,topdown-retiring,topdown-fe-bound,topdown-be-bound,topdown-bad-spec,CYCLE_ACTIVITY.STALLS_L2_MISS,EXE_ACTIVITY.BOUND_ON_STORES,EXE_ACTIVITY.1_PORTS_UTIL,cpu/INT_MISC.RECOVERY_CYCLES,cmask=1,edge/,CYCLE_ACTIVITY.STALLS_L3_MISS,CPU_CLK_UNHALTED.THREAD,CYCLE_ACTIVITY.STALLS_MEM_ANY,EXE_ACTIVITY.2_PORTS_UTIL,CYCLE_ACTIVITY.STALLS_TOTAL}:W
Both of these return "<not counted>" for all events, whilst they work
with the group removed respecting that the perf metric events must still
be grouped. A vendor events update will need to add METRIC_NO_GROUP to
these metrics to workaround the kernel PMU driver issue.
Fixes: a90cc5a9eeab45ea ("perf evsel: Don't let evsel__group_pmu_name() traverse unsorted group")
Signed-off-by: Ian Rogers <[email protected]>
Tested-by: Andi Kleen <[email protected]>
Cc: Adrian Hunter <[email protected]>
Cc: Alexander Shishkin <[email protected]>
Cc: Ian Rogers <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Kan Liang <[email protected]>
Cc: Mark Rutland <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Xing Zhengjun <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
Perf metric (topdown) events on Intel Icelake+ machines require a
group, however, they may be next to events that don't require a group.
Consider:
cycles,slots,topdown-fe-bound
The cycles event needn't be grouped but slots and topdown-fe-bound need
grouping.
Prior to this change, as slots and topdown-fe-bound need a group forcing
and all events share the same PMU, slots and topdown-fe-bound would be
forced into a group with cycles.
This is a bug on two fronts, cycles wasn't supposed to be grouped and
cycles can't be a group leader with a perf metric event.
This change adds recognition that cycles isn't force grouped and so it
shouldn't be force grouped with slots and topdown-fe-bound.
Fixes: a90cc5a9eeab45ea ("perf evsel: Don't let evsel__group_pmu_name() traverse unsorted group")
Signed-off-by: Ian Rogers <[email protected]>
Tested-by: Andi Kleen <[email protected]>
Cc: Adrian Hunter <[email protected]>
Cc: Alexander Shishkin <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Kan Liang <[email protected]>
Cc: Mark Rutland <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Xing Zhengjun <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
The test marks as skipped if a syscall with the AT_SYMLINK_NOFOLLOW flag
fails. This is because not all filesystems support changing the mode
bits of symlinks properly. These filesystems return an error but change
the mode bits:
newfstatat(4, "regfile", {st_mode=S_IFREG|0640, st_size=0, ...}, AT_SYMLINK_NOFOLLOW) = 0
newfstatat(4, "symlink", {st_mode=S_IFLNK|0777, st_size=7, ...}, AT_SYMLINK_NOFOLLOW) = 0
syscall_0x1c3(0x4, 0x55fa1f244396, 0x180, 0x100, 0x55fa1f24438e, 0x34) = -1 EOPNOTSUPP (Operation not supported)
newfstatat(4, "regfile", {st_mode=S_IFREG|0640, st_size=0, ...}, AT_SYMLINK_NOFOLLOW) = 0
This happens with btrfs and xfs:
$ tools/testing/selftests/fchmodat2/fchmodat2_test
TAP version 13
1..1
ok 1 # SKIP fchmodat2(symlink)
# Totals: pass:0 fail:0 xfail:0 xpass:0 skip:1 error:0
$ stat /tmp/ksft-fchmodat2.*/symlink
File: /tmp/ksft-fchmodat2.3NCqlE/symlink -> regfile
Size: 7 Blocks: 0 IO Block: 4096 symbolic link
Device: 7,0 Inode: 133 Links: 1
Access: (0600/lrw-------) Uid: ( 0/ root) Gid: ( 0/ root)
Signed-off-by: Alexey Gladkov <[email protected]>
Message-Id: <4532a04a870ff589ba62ceeacf76f0bd81b9ba01.1689092120.git.legion@kernel.org>
Signed-off-by: Christian Brauner <[email protected]>
|
|
Add a mitigation for the speculative return address stack overflow
vulnerability found on AMD processors.
The mitigation works by ensuring all RET instructions speculate to
a controlled location, similar to how speculation is controlled in the
retpoline sequence. To accomplish this, the __x86_return_thunk forces
the CPU to mispredict every function return using a 'safe return'
sequence.
To ensure the safety of this mitigation, the kernel must ensure that the
safe return sequence is itself free from attacker interference. In Zen3
and Zen4, this is accomplished by creating a BTB alias between the
untraining function srso_untrain_ret_alias() and the safe return
function srso_safe_ret_alias() which results in evicting a potentially
poisoned BTB entry and using that safe one for all function returns.
In older Zen1 and Zen2, this is accomplished using a reinterpretation
technique similar to Retbleed one: srso_untrain_ret() and
srso_safe_ret().
Signed-off-by: Borislav Petkov (AMD) <[email protected]>
|
|
If 'iptables-legacy' is available, 'ip6tables-legacy' command will be
used instead of 'ip6tables'. So no need to look if 'ip6tables' is
available in this case.
Cc: [email protected]
Fixes: 0c4cd3f86a40 ("selftests: mptcp: join: use 'iptables-legacy' if available")
Acked-by: Paolo Abeni <[email protected]>
Signed-off-by: Matthieu Baerts <[email protected]>
Signed-off-by: Mat Martineau <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
When attribute is enum type and marked as multi-attr, the netlink
respond is not parsed, fails with stack trace:
Traceback (most recent call last):
File "/net-next/tools/net/ynl/./test.py", line 520, in <module>
main()
File "/net-next/tools/net/ynl/./test.py", line 488, in main
dplls=dplls_get(282574471561216)
File "/net-next/tools/net/ynl/./test.py", line 48, in dplls_get
reply=act(args)
File "/net-next/tools/net/ynl/./test.py", line 41, in act
reply = ynl.dump(args.dump, attrs)
File "/net-next/tools/net/ynl/lib/ynl.py", line 598, in dump
return self._op(method, vals, dump=True)
File "/net-next/tools/net/ynl/lib/ynl.py", line 584, in _op
rsp_msg = self._decode(gm.raw_attrs, op.attr_set.name)
File "/net-next/tools/net/ynl/lib/ynl.py", line 451, in _decode
self._decode_enum(rsp, attr_spec)
File "/net-next/tools/net/ynl/lib/ynl.py", line 408, in _decode_enum
value = enum.entries_by_val[raw].name
TypeError: unhashable type: 'list'
error: 1
Redesign _decode_enum(..) to take a enum int value and translate
it to either a bitmask or enum name as expected.
Signed-off-by: Arkadiusz Kubalewski <[email protected]>
Reviewed-by: Donald Hunter <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Reviewed-by: Jakub Kicinski <[email protected]>
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
Remove wrong index adjustment, which is leftover from adding
support for sparse enums.
enum.entries_by_val() function shall not subtract the start-value, as
it is indexed with real enum value.
Fixes: c311aaa74ca1 ("tools: ynl: fix enum-as-flags in the generic CLI")
Signed-off-by: Arkadiusz Kubalewski <[email protected]>
Reviewed-by: Donald Hunter <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Reviewed-by: Jakub Kicinski <[email protected]>
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
Add ability to kunit.py to filter attributes and report a list of tests
including attributes without running tests.
Add flag "--filter" to input filters on test attributes. Tests will be
filtered out if they do not match all inputted filters.
Example: --filter speed=slow (This filter would run only the tests that are
marked as slow)
Filters have operations: <, >, <=, >=, !=, and =. But note that the
characters < and > are often interpreted by the shell, so they may need to
be quoted or escaped.
Example: --filter "speed>slow" or --filter speed\>slow (This filter would
run only the tests that have the speed faster than slow.
Additionally, multiple filters can be used.
Example: --filter "speed=slow, module!=example" (This filter would run
only the tests that have the speed slow and are not in the "example"
module)
Note if the user wants to skip filtered tests instead of not
running/showing them use the "--filter_action=skip" flag instead.
Expose the output of kunit.action=list option with flag "--list_tests" to
output a list of tests. Additionally, add flag "--list_tests_attr" to
output a list of tests and their attributes. These flags are useful to see
tests and test attributes without needing to run tests.
Example of the output of "--list_tests_attr":
example
example.test_1
example.test_2
# example.test_2.speed: slow
This output includes a suite, example, with two test cases, test_1 and
test_2. And in this instance test_2 has been marked as slow.
Reviewed-by: David Gow <[email protected]>
Signed-off-by: Rae Moar <[email protected]>
Signed-off-by: Shuah Khan <[email protected]>
|
|
Fix to check the availability of fprobe and kprobes for
add_remove_btfarg.tc.
Only if both kprobe and fprobe are not supported, it should return
"unsupported".
Link: https://lore.kernel.org/all/169024904889.395371.17998733386857387118.stgit@devnote2/
Fixes: 4231f30fcc34 ("selftests/ftrace: Add BTF arguments test cases")
Signed-off-by: Masami Hiramatsu (Google) <[email protected]>
Reviewed-by: Steven Rostedt (Google) <[email protected]>
|
|
There is a spelling mistake in an error message. Fix it.
Signed-off-by: Colin Ian King <[email protected]>
Acked-by: Björn Töpel <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Martin KaFai Lau <[email protected]>
|
|
We use two programs to check that the new reuseport logic is executed
appropriately.
The first is a TC clsact program which bpf_sk_assigns
the skb to a UDP or TCP socket created by user space. Since the test
communicates via lo we see both directions of packets in the eBPF.
Traffic ingressing to the reuseport socket is identified by looking
at the destination port. For TCP, we additionally need to make sure
that we only assign the initial SYN packets towards our listening
socket. The network stack then creates a request socket which
transitions to ESTABLISHED after the 3WHS.
The second is a reuseport program which shares the fact that
it has been executed with user space. This tells us that the delayed
lookup mechanism is working.
Signed-off-by: Daniel Borkmann <[email protected]>
Co-developed-by: Lorenz Bauer <[email protected]>
Signed-off-by: Lorenz Bauer <[email protected]>
Cc: Joe Stringer <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Martin KaFai Lau <[email protected]>
|
|
Currently the bpf_sk_assign helper in tc BPF context refuses SO_REUSEPORT
sockets. This means we can't use the helper to steer traffic to Envoy,
which configures SO_REUSEPORT on its sockets. In turn, we're blocked
from removing TPROXY from our setup.
The reason that bpf_sk_assign refuses such sockets is that the
bpf_sk_lookup helpers don't execute SK_REUSEPORT programs. Instead,
one of the reuseport sockets is selected by hash. This could cause
dispatch to the "wrong" socket:
sk = bpf_sk_lookup_tcp(...) // select SO_REUSEPORT by hash
bpf_sk_assign(skb, sk) // SK_REUSEPORT wasn't executed
Fixing this isn't as simple as invoking SK_REUSEPORT from the lookup
helpers unfortunately. In the tc context, L2 headers are at the start
of the skb, while SK_REUSEPORT expects L3 headers instead.
Instead, we execute the SK_REUSEPORT program when the assigned socket
is pulled out of the skb, further up the stack. This creates some
trickiness with regards to refcounting as bpf_sk_assign will put both
refcounted and RCU freed sockets in skb->sk. reuseport sockets are RCU
freed. We can infer that the sk_assigned socket is RCU freed if the
reuseport lookup succeeds, but convincing yourself of this fact isn't
straight forward. Therefore we defensively check refcounting on the
sk_assign sock even though it's probably not required in practice.
Fixes: 8e368dc72e86 ("bpf: Fix use of sk->sk_reuseport from sk_assign")
Fixes: cf7fbe660f2d ("bpf: Add socket assign support")
Co-developed-by: Daniel Borkmann <[email protected]>
Signed-off-by: Daniel Borkmann <[email protected]>
Cc: Joe Stringer <[email protected]>
Link: https://lore.kernel.org/bpf/CACAyw98+qycmpQzKupquhkxbvWK4OFyDuuLMBNROnfWMZxUWeA@mail.gmail.com/
Reviewed-by: Kuniyuki Iwashima <[email protected]>
Signed-off-by: Lorenz Bauer <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Martin KaFai Lau <[email protected]>
|
|
Add newly addded set-process-name test to .gitignore
Signed-off-by: Shuah Khan <[email protected]>
|
|
Remove clean target in Makefile to fix the following warning
and use the one in common lib.mk
Makefile:14: warning: overriding recipe for target 'clean'
../lib.mk:160: warning: ignoring old recipe for target 'clean'
Signed-off-by: Shuah Khan <[email protected]>
|
|
cat_val() is only used during CAT test but it checks for test type.
Remove test type checks and the unused else branch from cat_val().
Signed-off-by: Ilpo Järvinen <[email protected]>
Reviewed-by: Reinette Chatre <[email protected]>
Tested-by: Babu Moger <[email protected]>
Tested-by: Shaopeng Tan (Fujitsu) <[email protected]>
Signed-off-by: Shuah Khan <[email protected]>
|
|
Results include warm-up test which is discarded before passing the sum
to show_cache_info(). show_cache_info() handles this by subtracting one
from the number of tests in divisor. It is a trappy construct to have
sum and number of tests parameters to disagree like this.
A more logical place for subtracting the skipped tests is where the sum
is calculated so move it there. Pass the correct number of tests to
show_cache_info() so it can be used directly as the divisor for
calculating the average.
Signed-off-by: Ilpo Järvinen <[email protected]>
Reviewed-by: Reinette Chatre <[email protected]>
Tested-by: Babu Moger <[email protected]>
Tested-by: Shaopeng Tan (Fujitsu) <[email protected]>
Signed-off-by: Shuah Khan <[email protected]>
|
|
CAT and CMT tests have count_of_bits, long_mask, cbm_mask, and
cache_size global variables that can be moved into the sole using
function.
Make the global variables local variables of the relevant function to
scope them better.
While at it, move cache_size initialization into the declaration line.
Signed-off-by: Ilpo Järvinen <[email protected]>
Reviewed-by: Reinette Chatre <[email protected]>
Tested-by: Babu Moger <[email protected]>
Tested-by: Shaopeng Tan (Fujitsu) <[email protected]>
Signed-off-by: Shuah Khan <[email protected]>
|
|
struct resctrl_val_param has ->setup() function that accepts variable
argument list. All test cases use only 1 argument as input and it's
the struct resctrl_val_param pointer.
Instead of variable argument list, directly pass struct
resctrl_val_param pointer as the only parameter to ->setup().
Co-developed-by: Fenghua Yu <[email protected]>
Signed-off-by: Fenghua Yu <[email protected]>
Signed-off-by: Ilpo Järvinen <[email protected]>
Reviewed-by: Reinette Chatre <[email protected]>
Tested-by: Babu Moger <[email protected]>
Tested-by: Shaopeng Tan (Fujitsu) <[email protected]>
Signed-off-by: Shuah Khan <[email protected]>
|
|
Test name is passed to fill_buf functions so that they can loop around
buffer only once. This is required for CAT test case.
To loop around buffer only once, caller doesn't need to let fill_buf
know which test case it is. Instead, pass a boolean argument 'once'
which makes fill_buf more generic.
As run_benchmark() no longer needs to pass the test name to
run_fill_buf(), a few test running functions can be simplified to not
write the test name into the default benchmark_cmd. The has_ben
argument can also be removed now from those test running functions.
Co-developed-by: Fenghua Yu <[email protected]>
Signed-off-by: Fenghua Yu <[email protected]>
Signed-off-by: Ilpo Järvinen <[email protected]>
Reviewed-by: Reinette Chatre <[email protected]>
Tested-by: Babu Moger <[email protected]>
Tested-by: Shaopeng Tan (Fujitsu) <[email protected]>
Signed-off-by: Shuah Khan <[email protected]>
|
|
fill_buf's arguments can be improved in multiple ways:
- Multiple functions in fill_buf have start_ptr as one of their
argument which is a bit long and the extra "start" is pretty
obvious when it comes to pointers.
- Some of the functions take end_ptr and others size_t to indicate
the end of the buffer.
- Some arguments meaning buffer size are called just 's'
- mem_flush() takes void * but immediately converts it to char *
Cleanup the parameters to make things simpler and more consistent:
- Rename start_ptr to simply buf as it's shorter.
- Replace end_ptr and s parameters with buf_size and only calculate
end_ptr in the functions that truly use it.
- Make mem_flush() parameters to follow the same convention as the
other functions in fill_buf.
- convert mem_flush() char * to unsigned char *.
While at it, fix also a typo in a comment.
Signed-off-by: Ilpo Järvinen <[email protected]>
Reviewed-by: Reinette Chatre <[email protected]>
Tested-by: Babu Moger <[email protected]>
Tested-by: Shaopeng Tan (Fujitsu) <[email protected]>
Signed-off-by: Shuah Khan <[email protected]>
|
|
fill_buf stores buffer pointer into global variable startptr that is
only used in fill_cache().
Remove startptr as global variable, the local variable in fill_cache()
is enough to keep the pointer.
Signed-off-by: Ilpo Järvinen <[email protected]>
Reviewed-by: Reinette Chatre <[email protected]>
Tested-by: Babu Moger <[email protected]>
Tested-by: Shaopeng Tan (Fujitsu) <[email protected]>
Signed-off-by: Shuah Khan <[email protected]>
|
|
run_fill_buf()'s malloc_and_init_memory parameter is always 1. There's
also duplicated memory init code for malloc_and_init_memory == 0 case
in fill_buf() which is unused.
Remove the malloc_and_init_memory parameter and the duplicated mem init
code.
While at it, fix also a typo in run_fill_buf() prototype's argument.
Co-developed-by: Fenghua Yu <[email protected]>
Signed-off-by: Fenghua Yu <[email protected]>
Signed-off-by: Ilpo Järvinen <[email protected]>
Reviewed-by: Reinette Chatre <[email protected]>
Tested-by: Babu Moger <[email protected]>
Tested-by: Shaopeng Tan (Fujitsu) <[email protected]>
Signed-off-by: Shuah Khan <[email protected]>
|
|
When no benchmark_cmd is given, benchmark_cmd[1] is set to span in
main(). There's no need to do it again in run_mba_test().
Remove the duplicated preparation for span argument into
benchmark_cmd[1] from run_mba_test(). After this, the has_ben and span
arguments to run_mba_test() can be removed.
Co-developed-by: Fenghua Yu <[email protected]>
Signed-off-by: Fenghua Yu <[email protected]>
Signed-off-by: Ilpo Järvinen <[email protected]>
Reviewed-by: Reinette Chatre <[email protected]>
Tested-by: Babu Moger <[email protected]>
Tested-by: Shaopeng Tan (Fujitsu) <[email protected]>
Signed-off-by: Shuah Khan <[email protected]>
|
|
MBA and MBM tests to use megabytes to represent span. CMT test uses
bytes. The difference requires run_benchmark() to size the buffer
differently based on the test name, which in turn requires passing the
test name into run_benchmark().
Convert MBA and MBM tests to use span internally in bytes like CMT test
to remove the internal inconsistency between the tests. Remove the test
dependent buffer sizing from run_benchmark().
This change eliminates one of the reasons why the test name has to be
passed around but there are still other users too so the test name
passing cannot yet be removed.
Co-developed-by: Fenghua Yu <[email protected]>
Signed-off-by: Fenghua Yu <[email protected]>
Signed-off-by: Ilpo Järvinen <[email protected]>
Tested-by: Babu Moger <[email protected]>
Tested-by: Shaopeng Tan (Fujitsu) <[email protected]>
Signed-off-by: Shuah Khan <[email protected]>
|
|
Span is defined either as unsigned long or int.
Consistently use size_t everywhere for span as it refers to size of the
memory block.
Co-developed-by: Fenghua Yu <[email protected]>
Signed-off-by: Fenghua Yu <[email protected]>
Signed-off-by: Ilpo Järvinen <[email protected]>
Tested-by: Babu Moger <[email protected]>
Tested-by: Shaopeng Tan (Fujitsu) <[email protected]>
Signed-off-by: Shuah Khan <[email protected]>
|
|
Resctrl FS mount/umount are now cleanly paired leaving .mum_resctrlfs
in the struct resctrl_val_param unused.
Remove .mum_resctrlfs from struct resctrl_val_param.
Signed-off-by: Ilpo Järvinen <[email protected]>
Reviewed-by: Reinette Chatre <[email protected]>
Tested-by: Babu Moger <[email protected]>
Tested-by: Shaopeng Tan (Fujitsu) <[email protected]>
Signed-off-by: Shuah Khan <[email protected]>
|
|
mount_resctrl()
Mount/umount of the resctrl FS is now paired nicely per test.
Rename remount_resctrl(bool mum_resctrlfs) to mount_resctrl(). Make
it unconditionally try to mount the resctrl FS and return error if
resctrl FS was mounted already.
While at it, group the mount/umount prototypes in the header.
Signed-off-by: Ilpo Järvinen <[email protected]>
Tested-by: Babu Moger <[email protected]>
Tested-by: Shaopeng Tan (Fujitsu) <[email protected]>
Signed-off-by: Shuah Khan <[email protected]>
|
|
A few places currently lack umounting resctrl FS on error paths:
- cmt_resctrl_val() has multiple error paths with direct return.
- cat_perf_miss_val() has multiple error paths with direct return.
In addition, validate_resctrl_feature_request() is called by
run_mbm_test() and run_mba_test(). Neither MBA nor MBM test tries to
umount resctrl FS.
Each and every test does require resctrl FS to be present already for
feature check. Thus, it makes sense to just mount it on higher level in
resctrl_tests.c and properly pair it with umount.
Move resctrl FS (re)mount/unmount into each test function in
resctrl_tests.c. Make feature validation to simply check that resctrl
FS is mounted.
As there's the final umount in main() before this change, the selftest
should not leave resctrl FS behind after the tests even if one of the
forementioned paths is taken (thus, no fixes tag).
Signed-off-by: Ilpo Järvinen <[email protected]>
Tested-by: Babu Moger <[email protected]>
Tested-by: Shaopeng Tan (Fujitsu) <[email protected]>
Signed-off-by: Shuah Khan <[email protected]>
|
|
Resctrl FS mount/remount/umount code is hard to track. Better approach
is to use mount/umount pair for each test but that assumes resctrl FS
is not mounted beforehand.
Change umount_resctrlfs() so that it can unmount resctrl FS from any
path, and enable further simplifications into mount/remount/umount
logic by unmounting resctrl FS at the start if a pre-existing
mountpoint is found.
Suggested-by: Reinette Chatre <[email protected]>
Signed-off-by: Ilpo Järvinen <[email protected]>
Tested-by: Babu Moger <[email protected]>
Tested-by: Shaopeng Tan (Fujitsu) <[email protected]>
Signed-off-by: Shuah Khan <[email protected]>
|
|
Perf event fd (fd_lm) is not closed when run_fill_buf() returns error.
Close fd_lm only in cat_val() to make it easier to track it is always
closed.
Fixes: 790bf585b0ee ("selftests/resctrl: Add Cache Allocation Technology (CAT) selftest")
Signed-off-by: Ilpo Järvinen <[email protected]>
Tested-by: Babu Moger <[email protected]>
Tested-by: Shaopeng Tan (Fujitsu) <[email protected]>
Signed-off-by: Shuah Khan <[email protected]>
|
|
A child calls PARENT_EXIT() when it fails to run a benchmark to kill
the parent process. PARENT_EXIT() lacks unmount for the resctrl FS and
the parent won't be there to unmount it either after it gets killed.
Add the resctrl FS unmount also to PARENT_EXIT().
Fixes: 591a6e8588fc ("selftests/resctrl: Add basic resctrl file system operations and data")
Signed-off-by: Ilpo Järvinen <[email protected]>
Reviewed-by: Reinette Chatre <[email protected]>
Tested-by: Babu Moger <[email protected]>
Tested-by: Shaopeng Tan (Fujitsu) <[email protected]>
Signed-off-by: Shuah Khan <[email protected]>
|
|
The error path in fill_cache() does return before the allocated buffer
is freed leaking the buffer.
The leak was introduced when fill_cache_read() started to return errors
in commit c7b607fa9325 ("selftests/resctrl: Fix null pointer
dereference on open failed"), before that both fill functions always
returned 0.
Move free() earlier to prevent the mem leak.
Fixes: c7b607fa9325 ("selftests/resctrl: Fix null pointer dereference on open failed")
Signed-off-by: Ilpo Järvinen <[email protected]>
Reviewed-by: Reinette Chatre <[email protected]>
Tested-by: Babu Moger <[email protected]>
Tested-by: Shaopeng Tan (Fujitsu) <[email protected]>
Signed-off-by: Shuah Khan <[email protected]>
|
|
Makefile only lists *.c as build dependencies for the resctrl_tests
executable which excludes resctrl.h.
Add *.h to wildcard() to include resctrl.h.
Fixes: 591a6e8588fc ("selftests/resctrl: Add basic resctrl file system operations and data")
Signed-off-by: Ilpo Järvinen <[email protected]>
Reviewed-by: Reinette Chatre <[email protected]>
Tested-by: Babu Moger <[email protected]>
Tested-by: Shaopeng Tan (Fujitsu) <[email protected]>
Signed-off-by: Shuah Khan <[email protected]>
|
|
arch_skip_callchain_idx function
'perf record; with callchain recording fails as below
in powerpc:
./perf record -a -gR sleep 10
./perf report
perf: Segmentation fault
gdb trace points to thread__find_map
0 0x00000000101df314 in atomic_cmpxchg (newval=1818846826, oldval=1818846827, v=0x1001a8f3) at /home/athira/linux/tools/include/asm-generic/atomic-gcc.h:70
1 refcount_sub_and_test (i=1, r=0x1001a8f3) at /home/athira/linux/tools/include/linux/refcount.h:135
2 refcount_dec_and_test (r=0x1001a8f3) at /home/athira/linux/tools/include/linux/refcount.h:148
3 map__put (map=0x1001a8b3) at util/map.c:311
4 0x000000001016842c in __map__zput (map=0x7fffffffa368) at util/map.h:190
5 thread__find_map (thread=0x105b92f0, cpumode=<optimized out>, addr=13835058055283572736, al=al@entry=0x7fffffffa358) at util/event.c:582
6 0x000000001016882c in thread__find_symbol (thread=<optimized out>, cpumode=<optimized out>, addr=<optimized out>, al=0x7fffffffa358) at util/event.c:656
7 0x00000000102e12b4 in arch_skip_callchain_idx (thread=<optimized out>, chain=<optimized out>) at arch/powerpc/util/skip-callchain-idx.c:255
8 0x00000000101d3bf4 in thread__resolve_callchain_sample (thread=0x105b92f0, cursor=0x1053d160, evsel=<optimized out>, sample=0x7fffffffa908, parent=0x7fffffffa778, root_al=0x7fffffffa710,
max_stack=<optimized out>) at util/machine.c:2940
9 0x00000000101cd210 in sample__resolve_callchain (sample=<optimized out>, cursor=<optimized out>, parent=<optimized out>, evsel=<optimized out>, al=<optimized out>, max_stack=<optimized out>)
at util/callchain.c:1112
10 0x000000001022a9d8 in hist_entry_iter__add (iter=0x7fffffffa750, al=0x7fffffffa710, max_stack_depth=<optimized out>, arg=0x7fffffffbbd0) at util/hist.c:1232
11 0x0000000010056d98 in process_sample_event (tool=0x7fffffffbbd0, event=0x7ffff6223c38, sample=0x7fffffffa908, evsel=<optimized out>, machine=0x10524ef8) at builtin-report.c:332
Here arch_skip_callchain_idx calls thread__find_symbol and which
invokes thread__find_map with uninitialised "addr_location".
Snippet:
thread__find_symbol(thread, PERF_RECORD_MISC_USER, ip, &al);
Recent change with commit 0dd5041c9a0eaf8c ("perf addr_location: Add
init/exit/copy functions") , introduced "maps__zput" in the function
thread__find_map. This could result in segfault while accessing
uninitialised map from "struct addr_location". Fix this by adding
addr_location__init and addr_location__exit in arch_skip_callchain_idx.
Fixes: 0dd5041c9a0eaf8c ("perf addr_location: Add init/exit/copy functions")
Reported-by: Aneesh Kumar K.V <[email protected]>
Signed-off-by: Athira Rajeev <[email protected]>
Cc: Disha Goel <[email protected]>
Cc: Ian Rogers <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Kajol Jain <[email protected]>
Cc: Madhavan Srinivasan <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: [email protected]
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
Commit f8ad6018ce3c065a ("perf pmu: Remove duplication around
EVENT_SOURCE_DEVICE_PATH") uses sysfs__read_ull() to read a full sysfs
path, which will never succeeds as it already comes with the sysfs mount
point in it, which sysfs__read_ull() will add again.
Fix it by reading the file using filename__read_ull(), that will not add
the sysfs mount point.
Fixes: f8ad6018ce3c065a ("perf pmu: Remove duplication around EVENT_SOURCE_DEVICE_PATH")
Signed-off-by: Haixin Yu <[email protected]>
Tested-by: Jing Zhang <[email protected]>
Cc: Adrian Hunter <[email protected]>
Cc: Alexander Shishkin <[email protected]>
Cc: Ian Rogers <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: James Clark <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: John Garry <[email protected]>
Cc: Leo Yan <[email protected]>
Cc: Mark Rutland <[email protected]>
Cc: Mike Leach <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Will Deacon <[email protected]>
Cc: [email protected]
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
This patch will add the new test, which covers the prctl call
PR_SET_NAME command. The test tries to give a name using the PR_SET_NAME
call and then confirm it that it changed correctly by using PR_GET_NAME.
It also tries to rename it with empty name.In the test PR_GET_NAME is
tested by passing null pointer to it and check its behaviour.
Signed-off-by: Osama Muhammad <[email protected]>
Reviewed-by: Muhammad Usama Anjum <[email protected]>
Tested-by: Muhammad Usama Anjum <[email protected]>
Signed-off-by: Shuah Khan <[email protected]>
|
|
Use rm -df instead of rmdir -p since rmdir requires the directory exist
so it causes "make -C tools clean" failed if someone only builds other
tools but not counter.
Fixes: 228354ed692f ("tools/counter: Makefile: Remove lingering 'include' directories on make clean")
Signed-off-by: Anh Tuan Phan <[email protected]>
Link: https://lore.kernel.org/r/[email protected]/
Signed-off-by: William Breathitt Gray <[email protected]>
|
|
It is incorrect in python to compare integer values using the "is" keyword.
The "is" keyword in python is used to compare references to two objects,
not their values. Newer version of python3 (version 3.8) throws a warning
when such incorrect comparison is made. For value comparison, "==" should
be used.
Fix this in the code and suppress the following warning:
/usr/sbin/vmbus_testing:167: SyntaxWarning: "is" with a literal. Did you mean "=="?
Signed-off-by: Ani Sinha <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Wei Liu <[email protected]>
|