| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
The fill_buf code prevents compiler optimizating the entire read loop
away by writing the final value of the variable into a file. While it
achieves the goal, writing into a file requires significant amount of
work within the innermost test loop and also error handling.
A simpler approach is to take advantage of volatile. Writing through
a pointer to a volatile variable is enough to prevent compiler from
optimizing the write away, and therefore compiler cannot remove the
read loop either.
Add a volatile 'value_sink' into resctrl_tests.c and make fill_buf to
write into it. As a result, the error handling in fill_buf.c can be
simplified.
Signed-off-by: Ilpo Järvinen <[email protected]>
Reviewed-by: Reinette Chatre <[email protected]>
Signed-off-by: Shuah Khan <[email protected]>
|
|
Perf fd (pe_fd) is opened, reset, and enabled during every test the CAT
selftest runs. Also, ioctl(pe_fd, ...) calls are not error checked even
if ioctl() could return an error.
Open perf fd only once before the tests and only reset and enable the
counter within the test loop. Add error checking to pe_fd ioctl()
calls.
Signed-off-by: Ilpo Järvinen <[email protected]>
Reviewed-by: Reinette Chatre <[email protected]>
Signed-off-by: Shuah Khan <[email protected]>
|
|
The main CAT test function is called cat_val() and resides in cache.c
which is illogical.
Rename the function to cat_test() and move it into cat_test.c.
Signed-off-by: Ilpo Järvinen <[email protected]>
Reviewed-by: Reinette Chatre <[email protected]>
Signed-off-by: Shuah Khan <[email protected]>
|
|
Perf related variables pea_llc_miss, pe_read, and pe_fd are globals in
cache.c.
Convert them to locals for better scoping and make pea_llc_miss simpler
by renaming it to pea. Make close(pe_fd) handling easier to understand
by doing it inside cat_val().
Make also sizeof()s use safer way to determine the right struct.
Signed-off-by: Ilpo Järvinen <[email protected]>
Reviewed-by: Reinette Chatre <[email protected]>
Signed-off-by: Shuah Khan <[email protected]>
|
|
struct perf_event_attr initialization is spread into
perf_event_initialize() and perf_event_attr_initialize() and setting
->config is hardcoded by the deepest level.
perf_event_attr init belongs to perf_event_attr_initialize() so move it
entirely there. Rename the other function
perf_event_initialized_read_format().
Call each init function directly from the test as they will take
different parameters (especially true after the perf related global
variables are moved to local variables).
Signed-off-by: Ilpo Järvinen <[email protected]>
Reviewed-by: Reinette Chatre <[email protected]>
Signed-off-by: Shuah Khan <[email protected]>
|
|
Naming for perf event related functions, types, and variables is
inconsistent.
Make struct read_format and all functions related to perf events start
with "perf_". Adjust variable names towards the same direction but use
shorter names for variables where appropriate (pe prefix).
Signed-off-by: Ilpo Järvinen <[email protected]>
Reviewed-by: Reinette Chatre <[email protected]>
Signed-off-by: Shuah Khan <[email protected]>
|
|
Perf event handling has functions that are the sole caller of another
perf event handling related function:
- reset_enable_llc_perf() calls perf_event_open_llc_miss()
- perf_event_measure() calls get_llc_perf()
Remove the extra layer of calls to make the code easier to follow by
moving the code into the calling function.
Signed-off-by: Ilpo Järvinen <[email protected]>
Reviewed-by: Reinette Chatre <[email protected]>
Signed-off-by: Shuah Khan <[email protected]>
|
|
Perf counters are __u64 but the code converts them to unsigned long
before printing them out.
Remove unnecessary type conversion and retain the perf originating
value as __u64.
Signed-off-by: Ilpo Järvinen <[email protected]>
Reviewed-by: Reinette Chatre <[email protected]>
Signed-off-by: Shuah Khan <[email protected]>
|
|
show_cache_info() calculates results and provides generic cache
information. This makes it hard to alter pass/fail conditions.
Separate the test specific checks into CAT and CMT test files and
leave only the generic information part into show_cache_info().
Signed-off-by: Ilpo Järvinen <[email protected]>
Reviewed-by: Reinette Chatre <[email protected]>
Signed-off-by: Shuah Khan <[email protected]>
|
|
measure_cache_vals() does a different thing depending on the test case
that called it:
- For CAT, it measures LLC misses through perf.
- For CMT, it measures LLC occupancy through resctrl.
Split these two functionalities into own functions the CAT and CMT
tests can call directly. Replace passing the struct resctrl_val_param
parameter with the filename because it's more generic and all those
functions need out of resctrl_val.
Co-developed-by: Fenghua Yu <[email protected]>
Signed-off-by: Fenghua Yu <[email protected]>
Signed-off-by: Ilpo Järvinen <[email protected]>
Reviewed-by: Reinette Chatre <[email protected]>
Signed-off-by: Shuah Khan <[email protected]>
|
|
CAT test doesn't take shareable bits into account, i.e., the test might
be sharing cache with some devices (e.g., graphics).
Introduce get_mask_no_shareable() and use it to provision an
environment for CAT test where the allocated LLC is isolated better.
Excluding shareable_bits may create hole(s) into the cbm_mask, thus add
a new helper count_contiguous_bits() to find the longest contiguous set
of CBM bits.
create_bit_mask() is needed by an upcoming CAT test rewrite so make it
available in resctrl.h right away.
Signed-off-by: Ilpo Järvinen <[email protected]>
Reviewed-by: Reinette Chatre <[email protected]>
Signed-off-by: Shuah Khan <[email protected]>
|
|
CAT and CMT tests calculate size of the cache portion for the n-bits
cache allocation on their own.
Add cache_portion_size() helper that calculates size of the cache
portion for the given number of bits and use it to replace the existing
span calculations. This also prepares for the new CAT test that will
need to determine the size of the cache portion also during results
processing.
Rename also 'cache_size' local variables to 'cache_total_size' to
prevent misinterpretations.
Signed-off-by: Ilpo Järvinen <[email protected]>
Reviewed-by: Reinette Chatre <[email protected]>
Signed-off-by: Shuah Khan <[email protected]>
|
|
get_cache_size() does not modify cache_type so it could be const.
Mark cache_type const so that const char * can be passed to it. This
prevents warnings once many of the test parameters are marked const.
Signed-off-by: Ilpo Järvinen <[email protected]>
Reviewed-by: Reinette Chatre <[email protected]>
Signed-off-by: Shuah Khan <[email protected]>
|
|
Callers of get_cbm_mask() are required to pass a string into which the
capacity bitmask (CBM) is read. Neither CAT nor CMT tests need the
bitmask as string but just convert it into an unsigned long value.
Another limitation is that the bit mask reader can only read
.../cbm_mask files.
Generalize the bit mask reading function into get_bit_mask() such that
it can be used to handle other files besides the .../cbm_mask and
handles the unsigned long conversion within get_bit_mask() using
fscanf(). Change get_cbm_mask() to use get_bit_mask() and rename it to
get_full_cbm() to better indicate what the function does.
Return error from get_full_cbm() if the bitmask is zero for some reason
because it makes the code more robust as the selftests naturally assume
the bitmask has some bits.
Also mark cache_type const while at it and remove useless comments that
are related to processing of CBM bits.
Co-developed-by: Fenghua Yu <[email protected]>
Signed-off-by: Fenghua Yu <[email protected]>
Signed-off-by: Ilpo Järvinen <[email protected]>
Reviewed-by: Reinette Chatre <[email protected]>
Signed-off-by: Shuah Khan <[email protected]>
|
|
There are unnecessary nested calls in fill_buf.c:
- run_fill_buf() calls fill_cache()
- alloc_buffer() calls malloc_and_init_memory()
Simplify the code flow and remove those unnecessary call levels by
moving the called code inside the calling function and remove the
duplicated error print.
Resolve the difference in run_fill_buf() and fill_cache() parameter
name into 'buf_size' which is more descriptive than 'span'. Also, while
moving the allocation related code, rename 'p' into 'buf' to be
consistent in naming the variables.
Signed-off-by: Ilpo Järvinen <[email protected]>
Reviewed-by: Reinette Chatre <[email protected]>
Signed-off-by: Shuah Khan <[email protected]>
|
|
MBM, MBA and CMT test cases call run_fill_buf() that in turn calls
fill_cache() to alloc and loop indefinitely around the buffer. This
binds buffer allocation and running the benchmark into a single bundle
so that a selftest cannot allocate a buffer once and reuse it. CAT test
doesn't want to loop around the buffer continuously and after rewrite
it needs the ability to allocate the buffer separately.
Split buffer allocation out of fill_cache() into alloc_buffer(). This
change is part of preparation for the new CAT test that allocates a
buffer and does multiple passes over the same buffer (but not in an
infinite loop).
Co-developed-by: Fenghua Yu <[email protected]>
Signed-off-by: Fenghua Yu <[email protected]>
Signed-off-by: Ilpo Järvinen <[email protected]>
Reviewed-by: Reinette Chatre <[email protected]>
Signed-off-by: Shuah Khan <[email protected]>
|
|
A number function comments state the function return non-zero on
failure but in reality they can only return 0 on success and < 0 on
error.
Update the comments to say < 0 on error to match the behavior.
While at it, improve cat_val() comment to state that 0 means the test
was run (either pass or fail).
Signed-off-by: Ilpo Järvinen <[email protected]>
Reviewed-by: Reinette Chatre <[email protected]>
Signed-off-by: Shuah Khan <[email protected]>
|
|
perf_event_open_llc_miss() calls ctrlc_handler() to cleanup if
perf_event_open() returns an error. Those cleanups, however, are not
the responsibility of perf_event_open_llc_miss() and it thus interferes
unnecessarily with the usual cleanup pattern. Worse yet,
ctrlc_handler() calls exit() in the end preventing the ordinary cleanup
done in the calling function from executing.
ctrlc_handler() should only be used as a signal handler, not during
normal error handling.
Remove call to ctrlc_handler() from perf_event_open_llc_miss(). As
unmounting resctrlfs and test cleanup are already handled properly
by error rollbacks in the calling functions, no other changes are
necessary.
Suggested-by: Reinette Chatre <[email protected]>
Signed-off-by: Ilpo Järvinen <[email protected]>
Reviewed-by: Reinette Chatre <[email protected]>
Signed-off-by: Shuah Khan <[email protected]>
|
|
A number of functions in the resctrl selftests return errno. It is
problematic because errno is positive which is often counterintuitive.
Also, every site returning errno prints the error message already with
ksft_perror() so there is not much added value in returning the precise
error code.
Simply convert all places returning errno to return -1 that is typical
userspace error code in case of failures.
While at it, improve resctrl_val() comment to state that 0 means the
test was run (either pass or fail).
Signed-off-by: Ilpo Järvinen <[email protected]>
Reviewed-by: Reinette Chatre <[email protected]>
Signed-off-by: Shuah Khan <[email protected]>
|
|
The resctrl selftest code contains a number of perror() calls. Some of
them come with hash character and some don't. The kselftest framework
provides ksft_perror() that is compatible with test output formatting
so it should be used instead of adding custom hash signs.
Some perror() calls are too far away from anything that sets error.
For those call sites, ksft_print_msg() must be used instead.
Convert perror() to ksft_perror() or ksft_print_msg().
Other related changes:
- Remove hash signs
- Remove trailing stops & newlines from ksft_perror()
- Add terminating newlines for converted ksft_print_msg()
- Use consistent capitalization
- Small fixes/tweaks to typos & grammar of the messages
- Extract error printing out of PARENT_EXIT() to be able to
differentiate
Signed-off-by: Ilpo Järvinen <[email protected]>
Reviewed-by: Reinette Chatre <[email protected]>
Signed-off-by: Shuah Khan <[email protected]>
|
|
The netdev CI is reporting failures for the pmtu test:
[ 115.929264] br0: port 2(vxlan_a) entered forwarding state
# 2024/02/08 17:33:22 socat[7871] E bind(7, {AF=10 [0000:0000:0000:0000:0000:0000:0000:0000]:50000}, 28): Address already in use
# 2024/02/08 17:33:22 socat[7877] E write(7, 0x5598fb6ff000, 8192): Connection refused
# TEST: IPv6, bridged vxlan4: PMTU exceptions [FAIL]
# File size 0 mismatches exepcted value in locally bridged vxlan test
The root cause is apparently a socket created by a previous iteration
of the relevant loop still lasting in LAST_ACK state.
Note that even the file size check is racy, the receiver process dumping
the file could still be running in background
Allow the listener to bound on the same local port via SO_REUSEADDR and
collect file output file size only after the listener completion.
Fixes: 136a1b434bbb ("selftests: net: test vxlan pmtu exceptions with tcp")
Signed-off-by: Paolo Abeni <[email protected]>
Link: https://lore.kernel.org/r/4f51c11a1ce7ca7a4dabd926cffff63dadac9ba1.1707731086.git.pabeni@redhat.com
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
The helper waiting for a listener port can match any socket whose
hexadecimal representation of source or destination addresses
matches that of the given port.
Additionally, any socket state is accepted.
All the above can let the helper return successfully before the
relevant listener is actually ready, with unexpected results.
So far I could not find any related failure in the netdev CI, but
the next patch is going to make the critical event more easily
reproducible.
Address the issue matching the port hex only vs the relevant socket
field and additionally checking the socket state for TCP sockets.
Fixes: 3bdd9fd29cb0 ("selftests/net: synchronize udpgro tests' tx and rx connection")
Signed-off-by: Paolo Abeni <[email protected]>
Link: https://lore.kernel.org/r/192b3dbc443d953be32991d1b0ca432bd4c65008.1707731086.git.pabeni@redhat.com
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
The mentioned test is failing in slow environments:
# SO_TXTIME ipv4 clock monotonic
# ./so_txtime: recv: timeout: Resource temporarily unavailable
not ok 1 selftests: net: so_txtime.sh # exit=1
Tuning the tolerance in the test binary is error-prone and doomed
to failures is slow-enough environment.
Just resort to suppress any error in such cases. Note to suppress
them we need first to refactor a bit the code moving it to explicit
error handling.
Fixes: af5136f95045 ("selftests/net: SO_TXTIME with ETF and FQ")
Signed-off-by: Paolo Abeni <[email protected]>
Link: https://lore.kernel.org/r/2142d9ed4b5c5aa07dd1b455779625d91b175373.1707730902.git.pabeni@redhat.com
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
The gro self-tests sends the packets to be aggregated with
multiple write operations.
When running is slow environment, it's hard to guarantee that
the GRO engine will wait for the last packet in an intended
train.
The above causes almost deterministic failures in our CI for
the 'large' test-case.
Address the issue explicitly ignoring failures for such case
in slow environments (KSFT_MACHINE_SLOW==true).
Fixes: 7d1575014a63 ("selftests/net: GRO coalesce test")
Reviewed-by: Willem de Bruijn <[email protected]>
Signed-off-by: Paolo Abeni <[email protected]>
Link: https://lore.kernel.org/r/97d3ba83f5a2bfeb36f6bc0fb76724eb3dafb608.1707729403.git.pabeni@redhat.com
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
Older glibc's netinet/in.h may leave IPPROTO_MPTCP undefined when
building ip_local_port_range.c, that leads to "error: use of undeclared
identifier 'IPPROTO_MPTCP'".
Define IPPROTO_MPTCP in such cases, just like in other MPTCP selftests.
Fixes: 122db5e3634b ("selftests/net: add MPTCP coverage for IP_LOCAL_PORT_RANGE")
Reported-by: Linux Kernel Functional Testing <[email protected]>
Closes: https://lore.kernel.org/netdev/CA+G9fYvGO5q4o_Td_kyQgYieXWKw6ktMa-Q0sBu6S-0y3w2aEQ@mail.gmail.com/
Signed-off-by: Maxim Galaganov <[email protected]>
Tested-by: Linux Kernel Functional Testing <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
Fix rtla so that the following commands exit with 0 when help is invoked
rtla osnoise top -h
rtla osnoise hist -h
rtla timerlat top -h
rtla timerlat hist -h
Link: https://lore.kernel.org/linux-trace-devel/[email protected]
Cc: [email protected]
Fixes: 1eeb6328e8b3 ("rtla/timerlat: Add timerlat hist mode")
Signed-off-by: John Kacur <[email protected]>
Signed-off-by: Daniel Bristot de Oliveira <[email protected]>
|
|
Since the sched_priority for SCHED_OTHER is always 0, it makes no
sence to set it.
Setting nice for SCHED_OTHER seems more meaningful.
Link: https://lkml.kernel.org/r/[email protected]
Cc: [email protected]
Fixes: b1696371d865 ("rtla: Helper functions for rtla")
Signed-off-by: limingming3 <[email protected]>
Signed-off-by: Daniel Bristot de Oliveira <[email protected]>
|
|
clang is reporting:
$ make HOSTCC=clang CC=clang LLVM_IAS=1
clang -O -g -DVERSION=\"6.8.0-rc3\" -flto=auto -fexceptions
-fstack-protector-strong -fasynchronous-unwind-tables
-fstack-clash-protection -Wall -Werror=format-security
-Wp,-D_FORTIFY_SOURCE=2 -Wp,-D_GLIBCXX_ASSERTIONS
$(pkg-config --cflags libtracefs) -I include
-c -o src/in_kernel.o src/in_kernel.c
[...]
src/in_kernel.c:227:6: warning: variable 'curr_reactor' is used uninitialized whenever 'if' condition is true [-Wsometimes-uninitialized]
227 | if (!end)
| ^~~~
src/in_kernel.c:242:9: note: uninitialized use occurs here
242 | return curr_reactor;
| ^~~~~~~~~~~~
src/in_kernel.c:227:2: note: remove the 'if' if its condition is always false
227 | if (!end)
| ^~~~~~~~~
228 | goto out_free;
| ~~~~~~~~~~~~~
src/in_kernel.c:221:6: warning: variable 'curr_reactor' is used uninitialized whenever 'if' condition is true [-Wsometimes-uninitialized]
221 | if (!start)
| ^~~~~~
src/in_kernel.c:242:9: note: uninitialized use occurs here
242 | return curr_reactor;
| ^~~~~~~~~~~~
src/in_kernel.c:221:2: note: remove the 'if' if its condition is always false
221 | if (!start)
| ^~~~~~~~~~~
222 | goto out_free;
| ~~~~~~~~~~~~~
src/in_kernel.c:215:20: note: initialize the variable 'curr_reactor' to silence this warning
215 | char *curr_reactor;
| ^
| = NULL
2 warnings generated.
Which is correct. Setting curr_reactor to NULL avoids the problem.
Link: https://lkml.kernel.org/r/3a35551149e5ee0cb0950035afcb8082c3b5d05b.1707217097.git.bristot@kernel.org
Cc: [email protected]
Cc: Masami Hiramatsu <[email protected]>
Cc: Nathan Chancellor <[email protected]>
Cc: Nick Desaulniers <[email protected]>
Cc: Bill Wendling <[email protected]>
Cc: Justin Stitt <[email protected]>
Cc: Donald Zickus <[email protected]>
Fixes: 6d60f89691fc ("tools/rv: Add in-kernel monitor interface")
Signed-off-by: Daniel Bristot de Oliveira <[email protected]>
|
|
The following errors are showing up when compiling rv with clang:
$ make HOSTCC=clang CC=clang LLVM_IAS=1
[...]
clang -O -g -DVERSION=\"6.8.0-rc1\" -flto=auto -ffat-lto-objects
-fexceptions -fstack-protector-strong -fasynchronous-unwind-tables
-fstack-clash-protection -Wall -Werror=format-security
-Wp,-D_FORTIFY_SOURCE=2 -Wp,-D_GLIBCXX_ASSERTIONS
-Wno-maybe-uninitialized $(pkg-config --cflags libtracefs)
-I include -c -o src/utils.o src/utils.c
clang: warning: optimization flag '-ffat-lto-objects' is not supported [-Wignored-optimization-argument]
warning: unknown warning option '-Wno-maybe-uninitialized'; did you mean '-Wno-uninitialized'? [-Wunknown-warning-option]
1 warning generated.
clang -o rv -ggdb src/in_kernel.o src/rv.o src/trace.o src/utils.o $(pkg-config --libs libtracefs)
src/in_kernel.o: file not recognized: file format not recognized
clang: error: linker command failed with exit code 1 (use -v to see invocation)
make: *** [Makefile:110: rv] Error 1
Solve these issues by:
- removing -ffat-lto-objects and -Wno-maybe-uninitialized if using clang
- informing the linker about -flto=auto
Link: https://lkml.kernel.org/r/ed94a8ddc2ca8c8ef663cfb7ae9dd196c4a66b33.1707217097.git.bristot@kernel.org
Cc: [email protected]
Cc: Masami Hiramatsu <[email protected]>
Cc: Nathan Chancellor <[email protected]>
Cc: Nick Desaulniers <[email protected]>
Cc: Bill Wendling <[email protected]>
Cc: Justin Stitt <[email protected]>
Fixes: 4bc4b131d44c ("rv: Add rv tool")
Suggested-by: Donald Zickus <[email protected]>
Signed-off-by: Daniel Bristot de Oliveira <[email protected]>
|
|
Clang is reporting:
$ make HOSTCC=clang CC=clang LLVM_IAS=1
[...]
clang -O -g -DVERSION=\"6.8.0-rc3\" -flto=auto -fexceptions -fstack-protector-strong -fasynchronous-unwind-tables -fstack-clash-protection -Wall -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -Wp,-D_GLIBCXX_ASSERTIONS $(pkg-config --cflags libtracefs) -c -o src/utils.o src/utils.c
src/utils.c:241:19: warning: unused function 'sched_getattr' [-Wunused-function]
241 | static inline int sched_getattr(pid_t pid, struct sched_attr *attr,
| ^~~~~~~~~~~~~
1 warning generated.
Which is correct, so remove the unused function.
Link: https://lkml.kernel.org/r/eaed7ba122c4ae88ce71277c824ef41cbf789385.1707217097.git.bristot@kernel.org
Cc: [email protected]
Cc: Masami Hiramatsu <[email protected]>
Cc: Nathan Chancellor <[email protected]>
Cc: Nick Desaulniers <[email protected]>
Cc: Bill Wendling <[email protected]>
Cc: Justin Stitt <[email protected]>
Cc: Donald Zickus <[email protected]>
Fixes: b1696371d865 ("rtla: Helper functions for rtla")
Signed-off-by: Daniel Bristot de Oliveira <[email protected]>
|
|
clang is reporting this warning:
$ make HOSTCC=clang CC=clang LLVM_IAS=1
[...]
clang -O -g -DVERSION=\"6.8.0-rc3\" -flto=auto -fexceptions
-fstack-protector-strong -fasynchronous-unwind-tables
-fstack-clash-protection -Wall -Werror=format-security
-Wp,-D_FORTIFY_SOURCE=2 -Wp,-D_GLIBCXX_ASSERTIONS
$(pkg-config --cflags libtracefs) -c -o src/utils.o src/utils.c
src/utils.c:548:66: warning: 'fscanf' may overflow; destination buffer in argument 3 has size 1024, but the corresponding specifier may require size 1025 [-Wfortify-source]
548 | while (fscanf(fp, "%*s %" STR(MAX_PATH) "s %99s %*s %*d %*d\n", mount_point, type) == 2) {
| ^
Increase mount_point variable size to MAX_PATH+1 to avoid the overflow.
Link: https://lkml.kernel.org/r/1b46712e93a2f4153909514a36016959dcc4021c.1707217097.git.bristot@kernel.org
Cc: [email protected]
Cc: Masami Hiramatsu <[email protected]>
Cc: Nathan Chancellor <[email protected]>
Cc: Nick Desaulniers <[email protected]>
Cc: Bill Wendling <[email protected]>
Cc: Justin Stitt <[email protected]>
Cc: Donald Zickus <[email protected]>
Fixes: a957cbc02531 ("rtla: Add -C cgroup support")
Signed-off-by: Daniel Bristot de Oliveira <[email protected]>
|
|
When compiling rtla with clang, I am getting the following warnings:
$ make HOSTCC=clang CC=clang LLVM_IAS=1
[..]
clang -O -g -DVERSION=\"6.8.0-rc3\" -flto=auto -fexceptions
-fstack-protector-strong -fasynchronous-unwind-tables
-fstack-clash-protection -Wall -Werror=format-security
-Wp,-D_FORTIFY_SOURCE=2 -Wp,-D_GLIBCXX_ASSERTIONS
$(pkg-config --cflags libtracefs)
-c -o src/osnoise_hist.o src/osnoise_hist.c
src/osnoise_hist.c:138:6: warning: variable 'bucket' is used uninitialized whenever 'if' condition is false [-Wsometimes-uninitialized]
138 | if (data->bucket_size)
| ^~~~~~~~~~~~~~~~~
src/osnoise_hist.c:149:6: note: uninitialized use occurs here
149 | if (bucket < entries)
| ^~~~~~
src/osnoise_hist.c:138:2: note: remove the 'if' if its condition is always true
138 | if (data->bucket_size)
| ^~~~~~~~~~~~~~~~~~~~~~
139 | bucket = duration / data->bucket_size;
src/osnoise_hist.c:132:12: note: initialize the variable 'bucket' to silence this warning
132 | int bucket;
| ^
| = 0
1 warning generated.
[...]
clang -O -g -DVERSION=\"6.8.0-rc3\" -flto=auto -fexceptions
-fstack-protector-strong -fasynchronous-unwind-tables
-fstack-clash-protection -Wall -Werror=format-security
-Wp,-D_FORTIFY_SOURCE=2 -Wp,-D_GLIBCXX_ASSERTIONS
$(pkg-config --cflags libtracefs)
-c -o src/timerlat_hist.o src/timerlat_hist.c
src/timerlat_hist.c:181:6: warning: variable 'bucket' is used uninitialized whenever 'if' condition is false [-Wsometimes-uninitialized]
181 | if (data->bucket_size)
| ^~~~~~~~~~~~~~~~~
src/timerlat_hist.c:204:6: note: uninitialized use occurs here
204 | if (bucket < entries)
| ^~~~~~
src/timerlat_hist.c:181:2: note: remove the 'if' if its condition is always true
181 | if (data->bucket_size)
| ^~~~~~~~~~~~~~~~~~~~~~
182 | bucket = latency / data->bucket_size;
src/timerlat_hist.c:175:12: note: initialize the variable 'bucket' to silence this warning
175 | int bucket;
| ^
| = 0
1 warning generated.
This is a legit warning, but data->bucket_size is always > 0 (see
timerlat_hist_parse_args()), so the if is not necessary.
Remove the unneeded if (data->bucket_size) to avoid the warning.
Link: https://lkml.kernel.org/r/6e1b1665cd99042ae705b3e0fc410858c4c42346.1707217097.git.bristot@kernel.org
Cc: [email protected]
Cc: Masami Hiramatsu <[email protected]>
Cc: Nathan Chancellor <[email protected]>
Cc: Nick Desaulniers <[email protected]>
Cc: Bill Wendling <[email protected]>
Cc: Justin Stitt <[email protected]>
Cc: Donald Zickus <[email protected]>
Fixes: 1eeb6328e8b3 ("rtla/timerlat: Add timerlat hist mode")
Fixes: 829a6c0b5698 ("rtla/osnoise: Add the hist mode")
Signed-off-by: Daniel Bristot de Oliveira <[email protected]>
|
|
The following errors are showing up when compiling rtla with clang:
$ make HOSTCC=clang CC=clang LLVM_IAS=1
[...]
clang -O -g -DVERSION=\"6.8.0-rc1\" -flto=auto -ffat-lto-objects
-fexceptions -fstack-protector-strong
-fasynchronous-unwind-tables -fstack-clash-protection -Wall
-Werror=format-security -Wp,-D_FORTIFY_SOURCE=2
-Wp,-D_GLIBCXX_ASSERTIONS -Wno-maybe-uninitialized
$(pkg-config --cflags libtracefs) -c -o src/utils.o src/utils.c
clang: warning: optimization flag '-ffat-lto-objects' is not supported [-Wignored-optimization-argument]
warning: unknown warning option '-Wno-maybe-uninitialized'; did you mean '-Wno-uninitialized'? [-Wunknown-warning-option]
1 warning generated.
clang -o rtla -ggdb src/osnoise.o src/osnoise_hist.o src/osnoise_top.o
src/rtla.o src/timerlat_aa.o src/timerlat.o src/timerlat_hist.o
src/timerlat_top.o src/timerlat_u.o src/trace.o src/utils.o $(pkg-config --libs libtracefs)
src/osnoise.o: file not recognized: file format not recognized
clang: error: linker command failed with exit code 1 (use -v to see invocation)
make: *** [Makefile:110: rtla] Error 1
Solve these issues by:
- removing -ffat-lto-objects and -Wno-maybe-uninitialized if using clang
- informing the linker about -flto=auto
Link: https://lore.kernel.org/linux-trace-kernel/567ac1b94effc228ce9a0225b9df7232a9b35b55.1707217097.git.bristot@kernel.org
Cc: [email protected]
Cc: Masami Hiramatsu <[email protected]>
Cc: Nathan Chancellor <[email protected]>
Cc: Nick Desaulniers <[email protected]>
Cc: Bill Wendling <[email protected]>
Cc: Justin Stitt <[email protected]>
Fixes: 1a7b22ab15eb ("tools/rtla: Build with EXTRA_{C,LD}FLAGS")
Suggested-by: Donald Zickus <[email protected]>
Signed-off-by: Daniel Bristot de Oliveira <[email protected]>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull misc fixes from Andrew Morton:
"21 hotfixes. 12 are cc:stable and the remainder pertain to post-6.7
issues or aren't considered to be needed in earlier kernel versions"
* tag 'mm-hotfixes-stable-2024-02-10-11-16' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (21 commits)
nilfs2: fix potential bug in end_buffer_async_write
mm/damon/sysfs-schemes: fix wrong DAMOS tried regions update timeout setup
nilfs2: fix hang in nilfs_lookup_dirty_data_buffers()
MAINTAINERS: Leo Yan has moved
mm/zswap: don't return LRU_SKIP if we have dropped lru lock
fs,hugetlb: fix NULL pointer dereference in hugetlbs_fill_super
mailmap: switch email address for John Moon
mm: zswap: fix objcg use-after-free in entry destruction
mm/madvise: don't forget to leave lazy MMU mode in madvise_cold_or_pageout_pte_range()
arch/arm/mm: fix major fault accounting when retrying under per-VMA lock
selftests: core: include linux/close_range.h for CLOSE_RANGE_* macros
mm/memory-failure: fix crash in split_huge_page_to_list from soft_offline_page
mm: memcg: optimize parent iteration in memcg_rstat_updated()
nilfs2: fix data corruption in dsync block recovery for small block sizes
mm/userfaultfd: UFFDIO_MOVE implementation should use ptep_get()
exit: wait_task_zombie: kill the no longer necessary spin_lock_irq(siglock)
fs/proc: do_task_stat: use sig->stats_lock to gather the threads/children stats
fs/proc: do_task_stat: move thread_group_cputime_adjusted() outside of lock_task_sighand()
getrusage: use sig->stats_lock rather than lock_task_sighand()
getrusage: move thread_group_cputime_adjusted() outside of lock_task_sighand()
...
|
|
This exact case was fail for async crypto and we weren't
catching it.
Signed-off-by: Jakub Kicinski <[email protected]>
Reviewed-by: Simon Horman <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
We've had issues with gcc and 'asm goto' before, and we created a
'asm_volatile_goto()' macro for that in the past: see commits
3f0116c3238a ("compiler/gcc4: Add quirk for 'asm goto' miscompilation
bug") and a9f180345f53 ("compiler/gcc4: Make quirk for
asm_volatile_goto() unconditional").
Then, much later, we ended up removing the workaround in commit
43c249ea0b1e ("compiler-gcc.h: remove ancient workaround for gcc PR
58670") because we no longer supported building the kernel with the
affected gcc versions, but we left the macro uses around.
Now, Sean Christopherson reports a new version of a very similar
problem, which is fixed by re-applying that ancient workaround. But the
problem in question is limited to only the 'asm goto with outputs'
cases, so instead of re-introducing the old workaround as-is, let's
rename and limit the workaround to just that much less common case.
It looks like there are at least two separate issues that all hit in
this area:
(a) some versions of gcc don't mark the asm goto as 'volatile' when it
has outputs:
https://gcc.gnu.org/bugzilla/show_bug.cgi?id=98619
https://gcc.gnu.org/bugzilla/show_bug.cgi?id=110420
which is easy to work around by just adding the 'volatile' by hand.
(b) Internal compiler errors:
https://gcc.gnu.org/bugzilla/show_bug.cgi?id=110422
which are worked around by adding the extra empty 'asm' as a
barrier, as in the original workaround.
but the problem Sean sees may be a third thing since it involves bad
code generation (not an ICE) even with the manually added 'volatile'.
but the same old workaround works for this case, even if this feels a
bit like voodoo programming and may only be hiding the issue.
Reported-and-tested-by: Sean Christopherson <[email protected]>
Link: https://lore.kernel.org/all/[email protected]/
Cc: Nick Desaulniers <[email protected]>
Cc: Uros Bizjak <[email protected]>
Cc: Jakub Jelinek <[email protected]>
Cc: Andrew Pinski <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
|
|
Add a test case into the netlink checks that will show the number of
nested action recursions won't exceed 16. Going to 17 on a small
clone call isn't enough to exhaust the stack on (most) systems, so
it should be safe to run even on systems that don't have the fix
applied.
Signed-off-by: Aaron Conole <[email protected]>
Reviewed-by: Simon Horman <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
The redirection test case fails in the netdev CI on debug kernels
because an FDB entry is learned despite the presence of a tc filter that
redirects incoming traffic [1].
I am unable to reproduce the failure locally, but I can see how it can
happen given that learning is first enabled and only then the ingress tc
filter is configured. On debug kernels the time window between these two
operations is longer compared to regular kernels, allowing random
packets to be transmitted and trigger learning.
Fix by reversing the order and configure the ingress tc filter before
enabling learning.
[1]
[...]
# TEST: Locked port MAB redirect [FAIL]
# Locked entry created for redirected traffic
Fixes: 38c43a1ce758 ("selftests: forwarding: Add test case for traffic redirection from a locked port")
Signed-off-by: Ido Schimmel <[email protected]>
Reviewed-by: Hangbin Liu <[email protected]>
Acked-by: Nikolay Aleksandrov <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
Suppress the following grep warnings:
[...]
INFO: # Port group entries configuration tests - (*, G)
TEST: Common port group entries configuration tests (IPv4 (*, G)) [ OK ]
TEST: Common port group entries configuration tests (IPv6 (*, G)) [ OK ]
grep: warning: stray \ before /
grep: warning: stray \ before /
grep: warning: stray \ before /
TEST: IPv4 (*, G) port group entries configuration tests [ OK ]
grep: warning: stray \ before /
grep: warning: stray \ before /
grep: warning: stray \ before /
TEST: IPv6 (*, G) port group entries configuration tests [ OK ]
[...]
They do not fail the test, but do clutter the output.
Fixes: b6d00da08610 ("selftests: forwarding: Add bridge MDB test")
Signed-off-by: Ido Schimmel <[email protected]>
Reviewed-by: Hangbin Liu <[email protected]>
Acked-by: Nikolay Aleksandrov <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
After enabling a multicast querier on the bridge (like the test is
doing), the bridge will wait for the Max Response Delay before starting
to forward according to its MDB in order to let Membership Reports
enough time to be received and processed.
Currently, the test is waiting for exactly the default Max Response
Delay (10 seconds) which is racy and leads to failures [1].
Fix by reducing the Max Response Delay to 1 second.
[1]
[...]
# TEST: IPv4 host entries forwarding tests [FAIL]
# Packet locally received after flood
Fixes: b6d00da08610 ("selftests: forwarding: Add bridge MDB test")
Signed-off-by: Ido Schimmel <[email protected]>
Reviewed-by: Hangbin Liu <[email protected]>
Acked-by: Nikolay Aleksandrov <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
After enabling a multicast querier on the bridge (like the test is
doing), the bridge will wait for the Max Response Delay before starting
to forward according to its MDB in order to let Membership Reports
enough time to be received and processed.
Currently, the test is waiting for exactly the default Max Response
Delay (10 seconds) which is racy and leads to failures [1].
Fix by reducing the Max Response Delay to 1 second.
[1]
[...]
# TEST: L2 miss - Multicast (IPv4) [FAIL]
# Unregistered multicast filter was hit after adding MDB entry
Fixes: 8c33266ae26a ("selftests: forwarding: Add layer 2 miss test cases")
Signed-off-by: Ido Schimmel <[email protected]>
Reviewed-by: Hangbin Liu <[email protected]>
Acked-by: Nikolay Aleksandrov <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
The test toggles the carrier of a bridge port in order to test the
bridge backup port feature.
Due to the linkwatch delayed work the carrier change is not always
reflected fast enough to the bridge driver and packets are not forwarded
as the test expects, resulting in failures [1].
Fix by busy waiting on the bridge port state until it changes to the
desired state following the carrier change.
[1]
# Backup port
# -----------
[...]
# TEST: swp1 carrier off [ OK ]
# TEST: No forwarding out of swp1 [FAIL]
[ 641.995910] br0: port 1(swp1) entered disabled state
# TEST: No forwarding out of vx0 [ OK ]
Fixes: b408453053fb ("selftests: net: Add bridge backup port and backup nexthop ID test")
Signed-off-by: Ido Schimmel <[email protected]>
Reviewed-by: Petr Machata <[email protected]>
Acked-by: Paolo Abeni <[email protected]>
Acked-by: Nikolay Aleksandrov <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
The reuseport_addr_any.sh is currently skipping DCCP tests and
pmtu.sh is skipping all the FOU/GUE related cases: add the missing
options.
Signed-off-by: Paolo Abeni <[email protected]>
Reviewed-by: Eric Dumazet <[email protected]>
Link: https://lore.kernel.org/r/38d3ca7f909736c1aef56e6244d67c82a9bba6ff.1707326987.git.pabeni@redhat.com
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Paolo Abeni:
"Including fixes from WiFi and netfilter.
Current release - regressions:
- nic: intel: fix old compiler regressions
- netfilter: ipset: missing gc cancellations fixed
Current release - new code bugs:
- netfilter: ctnetlink: fix filtering for zone 0
Previous releases - regressions:
- core: fix from address in memcpy_to_iter_csum()
- netfilter: nfnetlink_queue: un-break NF_REPEAT
- af_unix: fix memory leak for dead unix_(sk)->oob_skb in GC.
- devlink: avoid potential loop in devlink_rel_nested_in_notify_work()
- iwlwifi:
- mvm: fix a battery life regression
- fix double-free bug
- mac80211: fix waiting for beacons logic
- nic: nfp: flower: prevent re-adding mac index for bonded port
Previous releases - always broken:
- rxrpc: fix generation of serial numbers to skip zero
- tipc: check the bearer type before calling tipc_udp_nl_bearer_add()
- tunnels: fix out of bounds access when building IPv6 PMTU error
- nic: hv_netvsc: register VF in netvsc_probe if NET_DEVICE_REGISTER
missed
- nic: atlantic: fix DMA mapping for PTP hwts ring
Misc:
- selftests: more fixes to deal with very slow hosts"
* tag 'net-6.8-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (80 commits)
netfilter: nft_set_pipapo: remove scratch_aligned pointer
netfilter: nft_set_pipapo: add helper to release pcpu scratch area
netfilter: nft_set_pipapo: store index in scratch maps
netfilter: nft_set_rbtree: skip end interval element from gc
netfilter: nfnetlink_queue: un-break NF_REPEAT
netfilter: nf_tables: use timestamp to check for set element timeout
netfilter: nft_ct: reject direction for ct id
netfilter: ctnetlink: fix filtering for zone 0
s390/qeth: Fix potential loss of L3-IP@ in case of network issues
netfilter: ipset: Missing gc cancellations fixed
octeontx2-af: Initialize maps.
net: ethernet: ti: cpsw: enable mac_managed_pm to fix mdio
net: ethernet: ti: cpsw_new: enable mac_managed_pm to fix mdio
netfilter: nft_set_pipapo: remove static in nft_pipapo_get()
netfilter: nft_compat: restrict match/target protocol to u16
netfilter: nft_compat: reject unused compat flag
netfilter: nft_compat: narrow down revision to unsigned 8-bits
net: intel: fix old compiler regressions
MAINTAINERS: Maintainer change for rds
selftests: cmsg_ipv6: repeat the exact packet
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf
Pablo Neira Ayuso says:
====================
Netfilter fixes for net
The following patchset contains Netfilter fixes for net:
1) Narrow down target/match revision to u8 in nft_compat.
2) Bail out with unused flags in nft_compat.
3) Restrict layer 4 protocol to u16 in nft_compat.
4) Remove static in pipapo get command that slipped through when
reducing set memory footprint.
5) Follow up incremental fix for the ipset performance regression,
this includes the missing gc cancellation, from Jozsef Kadlecsik.
6) Allow to filter by zone 0 in ctnetlink, do not interpret zone 0
as no filtering, from Felix Huettner.
7) Reject direction for NFT_CT_ID.
8) Use timestamp to check for set element expiration while transaction
is handled to prevent garbage collection from removing set elements
that were just added by this transaction. Packet path and netlink
dump/get path still use current time to check for expiration.
9) Restore NF_REPEAT in nfnetlink_queue, from Florian Westphal.
10) map_index needs to be percpu and per-set, not just percpu.
At this time its possible for a pipapo set to fill the all-zero part
with ones and take the 'might have bits set' as 'start-from-zero' area.
From Florian Westphal. This includes three patches:
- Change scratchpad area to a structure that provides space for a
per-set-and-cpu toggle and uses it of the percpu one.
- Add a new free helper to prepare for the next patch.
- Remove the scratch_aligned pointer and makes AVX2 implementation
use the exact same memory addresses for read/store of the matching
state.
netfilter pull request 24-02-08
* tag 'nf-24-02-08' of git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf:
netfilter: nft_set_pipapo: remove scratch_aligned pointer
netfilter: nft_set_pipapo: add helper to release pcpu scratch area
netfilter: nft_set_pipapo: store index in scratch maps
netfilter: nft_set_rbtree: skip end interval element from gc
netfilter: nfnetlink_queue: un-break NF_REPEAT
netfilter: nf_tables: use timestamp to check for set element timeout
netfilter: nft_ct: reject direction for ct id
netfilter: ctnetlink: fix filtering for zone 0
netfilter: ipset: Missing gc cancellations fixed
netfilter: nft_set_pipapo: remove static in nft_pipapo_get()
netfilter: nft_compat: restrict match/target protocol to u16
netfilter: nft_compat: reject unused compat flag
netfilter: nft_compat: narrow down revision to unsigned 8-bits
====================
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Paolo Abeni <[email protected]>
|
|
previously filtering for the default zone would actually skip the zone
filter and flush all zones.
Fixes: eff3c558bb7e ("netfilter: ctnetlink: support filtering by zone")
Reported-by: Ilya Maximets <[email protected]>
Closes: https://lore.kernel.org/netdev/[email protected]/
Signed-off-by: Felix Huettner <[email protected]>
Signed-off-by: Pablo Neira Ayuso <[email protected]>
|
|
Correct header file is needed for getting CLOSE_RANGE_* macros.
Previously it was tested with newer glibc which didn't show the need to
include the header which was a mistake.
Link: https://lkml.kernel.org/r/[email protected]
Fixes: ec54424923cf ("selftests: core: remove duplicate defines")
Reported-by: Aishwarya TCV <[email protected]>
Link: https://lore.kernel.org/all/[email protected]
Signed-off-by: Muhammad Usama Anjum <[email protected]>
Cc: Shuah Khan <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
|
|
Pull kvm fixes from Paolo Bonzini:
"x86 guest:
- Avoid false positive for check that only matters on AMD processors
x86:
- Give a hint when Win2016 might fail to boot due to XSAVES &&
!XSAVEC configuration
- Do not allow creating an in-kernel PIT unless an IOAPIC already
exists
RISC-V:
- Allow ISA extensions that were enabled for bare metal in 6.8 (Zbc,
scalar and vector crypto, Zfh[min], Zihintntl, Zvfh[min], Zfa)
S390:
- fix CC for successful PQAP instruction
- fix a race when creating a shadow page"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
x86/coco: Define cc_vendor without CONFIG_ARCH_HAS_CC_PLATFORM
x86/kvm: Fix SEV check in sev_map_percpu_data()
KVM: x86: Give a hint when Win2016 might fail to boot due to XSAVES erratum
KVM: x86: Check irqchip mode before create PIT
KVM: riscv: selftests: Add Zfa extension to get-reg-list test
RISC-V: KVM: Allow Zfa extension for Guest/VM
KVM: riscv: selftests: Add Zvfh[min] extensions to get-reg-list test
RISC-V: KVM: Allow Zvfh[min] extensions for Guest/VM
KVM: riscv: selftests: Add Zihintntl extension to get-reg-list test
RISC-V: KVM: Allow Zihintntl extension for Guest/VM
KVM: riscv: selftests: Add Zfh[min] extensions to get-reg-list test
RISC-V: KVM: Allow Zfh[min] extensions for Guest/VM
KVM: riscv: selftests: Add vector crypto extensions to get-reg-list test
RISC-V: KVM: Allow vector crypto extensions for Guest/VM
KVM: riscv: selftests: Add scaler crypto extensions to get-reg-list test
RISC-V: KVM: Allow scalar crypto extensions for Guest/VM
KVM: riscv: selftests: Add Zbc extension to get-reg-list test
RISC-V: KVM: Allow Zbc extension for Guest/VM
KVM: s390: fix cc for successful PQAP
KVM: s390: vsie: fix race during shadow creation
|
|
Ensure that pidfd_getfd() reports -ESRCH if the task is already exiting.
Signed-off-by: Tycho Andersen <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Christian Brauner <[email protected]>
|
|
cmsg_ipv6 test requests tcpdump to capture 4 packets,
and sends until tcpdump quits. Only the first packet
is "real", however, and the rest are basic UDP packets.
So if tcpdump doesn't start in time it will miss
the real packet and only capture the UDP ones.
This makes the test fail on slow machine (no KVM or with
debug enabled) 100% of the time, while it passes in fast
environments.
Repeat the "real" / expected packet.
Fixes: 9657ad09e1fa ("selftests: net: test IPV6_TCLASS")
Fixes: 05ae83d5a4a2 ("selftests: net: test IPV6_HOPLIMIT")
Signed-off-by: Jakub Kicinski <[email protected]>
Reviewed-by: Simon Horman <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|