aboutsummaryrefslogtreecommitdiff
path: root/tools
AgeCommit message (Collapse)AuthorFilesLines
2021-09-28perf tools: Add define for libtracefs versionIan Rogers1-0/+6
This will allow version specific support of libtracefs. Signed-off-by: Ian Rogers <[email protected]> Acked-by: Jiri Olsa <[email protected]> Cc: Alexander Shishkin <[email protected]> Cc: Mark Rutland <[email protected]> Cc: Namhyung Kim <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: Stephane Eranian <[email protected]> Cc: Steven Rostedt (VMware) <[email protected]> Cc: Tzvetomir Stoyanov (VMware) <[email protected]> Cc: [email protected] Link: http://lore.kernel.org/lkml/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2021-09-28perf tools: Add define for libtraceevent versionIan Rogers1-0/+6
The definition is derived from pkg-config as discussed in: https://lore.kernel.org/lkml/[email protected]/ The definition is computed using expr rather than passed to be computed in C code, this avoids complications with quote in the variable expansions. For example see the target python/perf.so in Makefile.perf. Signed-off-by: Ian Rogers <[email protected]> Acked-by: Jiri Olsa <[email protected]> Cc: Alexander Shishkin <[email protected]> Cc: Mark Rutland <[email protected]> Cc: Namhyung Kim <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: Stephane Eranian <[email protected]> Cc: Steven Rostedt (VMware) <[email protected]> Cc: Tzvetomir Stoyanov (VMware) <[email protected]> Cc: [email protected] Link: http://lore.kernel.org/lkml/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2021-09-28perf tools: Enable libtracefs dynamic linkingIan Rogers5-0/+26
Currently libtracefs isn't used by perf, but there are potential improvements by using it as identified Steven Rostedt's e-mail: https://lore.kernel.org/lkml/[email protected]/ This change is modelled on the dynamic libtraceevent patch by Michael Petlan: https://lore.kernel.org/linux-perf-users/[email protected]/ v3. Adds file missed in v1 and v2 spotted by Jiri Olsa. Signed-off-by: Ian Rogers <[email protected]> Acked-by: Jiri Olsa <[email protected]> Cc: Alexander Shishkin <[email protected]> Cc: Mark Rutland <[email protected]> Cc: Namhyung Kim <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: Stephane Eranian <[email protected]> Cc: Steven Rostedt (VMware) <[email protected]> Cc: Tzvetomir Stoyanov (VMware) <[email protected]> Cc: [email protected] Link: http://lore.kernel.org/lkml/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2021-09-28perf test: Workload test of all PMUsIan Rogers1-0/+22
Iterate over the list of PMUs and run the 'true' workload on them. If the event isn't printed then run the large 'perf bench internals synthesize' workload and check the event is counted. On a Skylake this test takes 1m15s mainly running the 'true' workload. Suggested-by: John Garry <[email protected]> Signed-off-by: Ian Rogers <[email protected]> Reviewed-by: John Garry <[email protected]> Cc: Alexander Shishkin <[email protected]> Cc: Jin Yao <[email protected]> Cc: Jiri Olsa <[email protected]> Cc: Mark Rutland <[email protected]> Cc: Namhyung Kim <[email protected]> Cc: Paul Clarke <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: Stephane Eranian <[email protected]> Link: http://lore.kernel.org/lkml/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2021-09-28perf test: Workload test of metric and metricgroupsIan Rogers2-0/+34
Test every metric and metricgroup with 'true' as a workload. For metrics, check that we see the metric printed or get unsupported. If the 'true' workload executes too quickly retry with 'perf bench internals synthesize'. v3. Fix test condition (thanks to Paul A. Clarke <[email protected]>). Add a fallback case of a larger workload so that we don't ignore "<not counted>". v2. Switched the workload to something faster. Signed-off-by: Ian Rogers <[email protected]> Reviewed-by: John Garry <[email protected]> Cc: Alexander Shishkin <[email protected]> Cc: Jin Yao <[email protected]> Cc: Jiri Olsa <[email protected]> Cc: Mark Rutland <[email protected]> Cc: Namhyung Kim <[email protected]> Cc: Paul Clarke <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: Stephane Eranian <[email protected]> Link: http://lore.kernel.org/lkml/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2021-09-28perf jevents: Add __maybe_unused attribute to unused function argArnaldo Carvalho de Melo1-1/+2
The tools/perf/pmu-events/jevents.c file isn't being compiled with -Werror and -Wextra, which will be the case soon, so before we turn those compiler flags on, fix what it would flag. Cc: Alexander Shishkin <[email protected]> Cc: Ingo Molnar <[email protected]> Cc: Jiri Olsa <[email protected]> Cc: Like Xu <[email protected]> Cc: Mark Rutland <[email protected]> Cc: Namhyung Kim <[email protected]> Cc: Peter Zijlstra <[email protected]> Signed-off-by: Arnaldo Carvalho de Melo <[email protected]> To: John Garry <[email protected]>
2021-09-28selftests: KVM: Don't clobber XMM register when readOliver Upton1-1/+1
There is no need to clobber a register that is only being read from. Oops. Drop the XMM register from the clobbers list. Signed-off-by: Oliver Upton <[email protected]> Message-Id: <[email protected]> Signed-off-by: Paolo Bonzini <[email protected]>
2021-09-28Merge git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpfDavid S. Miller3-7/+17
Daniel Borkmann says: ==================== pull-request: bpf 2021-09-28 The following pull-request contains BPF updates for your *net* tree. We've added 10 non-merge commits during the last 14 day(s) which contain a total of 11 files changed, 139 insertions(+), 53 deletions(-). The main changes are: 1) Fix MIPS JIT jump code emission for too large offsets, from Piotr Krysiuk. 2) Fix x86 JIT atomic/fetch emission when dst reg maps to rax, from Johan Almbladh. 3) Fix cgroup_sk_alloc corner case when called from interrupt, from Daniel Borkmann. 4) Fix segfault in libbpf's linker for objects without BTF, from Kumar Kartikeya Dwivedi. 5) Fix bpf_jit_charge_modmem for applications with CAP_BPF, from Lorenz Bauer. 6) Fix return value handling for struct_ops BPF programs, from Hou Tao. 7) Various fixes to BPF selftests, from Jiri Benc. ==================== Signed-off-by: David S. Miller <[email protected]> ,
2021-09-28selftests, bpf: test_lwt_ip_encap: Really disable rp_filterJiri Benc1-5/+8
It's not enough to set net.ipv4.conf.all.rp_filter=0, that does not override a greater rp_filter value on the individual interfaces. We also need to set net.ipv4.conf.default.rp_filter=0 before creating the interfaces. That way, they'll also get their own rp_filter value of zero. Fixes: 0fde56e4385b0 ("selftests: bpf: add test_lwt_ip_encap selftest") Signed-off-by: Jiri Benc <[email protected]> Signed-off-by: Daniel Borkmann <[email protected]> Link: https://lore.kernel.org/bpf/b1cdd9d469f09ea6e01e9c89a6071c79b7380f89.1632386362.git.jbenc@redhat.com
2021-09-28selftests, bpf: Fix makefile dependencies on libbpfJiri Benc1-1/+2
When building bpf selftest with make -j, I'm randomly getting build failures such as this one: In file included from progs/bpf_flow.c:19: [...]/tools/testing/selftests/bpf/tools/include/bpf/bpf_helpers.h:11:10: fatal error: 'bpf_helper_defs.h' file not found #include "bpf_helper_defs.h" ^~~~~~~~~~~~~~~~~~~ The file that fails the build varies between runs but it's always in the progs/ subdir. The reason is a missing make dependency on libbpf for the .o files in progs/. There was a dependency before commit 3ac2e20fba07e but that commit removed it to prevent unneeded rebuilds. However, that only works if libbpf has been built already; the 'wildcard' prerequisite does not trigger when there's no bpf_helper_defs.h generated yet. Keep the libbpf as an order-only prerequisite to satisfy both goals. It is always built before the progs/ objects but it does not trigger unnecessary rebuilds by itself. Fixes: 3ac2e20fba07e ("selftests/bpf: BPF object files should depend only on libbpf headers") Signed-off-by: Jiri Benc <[email protected]> Signed-off-by: Andrii Nakryiko <[email protected]> Signed-off-by: Daniel Borkmann <[email protected]> Link: https://lore.kernel.org/bpf/ee84ab66436fba05a197f952af23c98d90eb6243.1632758415.git.jbenc@redhat.com
2021-09-28libbpf: Fix segfault in static linker for objects without BTFKumar Kartikeya Dwivedi1-1/+7
When a BPF object is compiled without BTF info (without -g), trying to link such objects using bpftool causes a SIGSEGV due to btf__get_nr_types accessing obj->btf which is NULL. Fix this by checking for the NULL pointer, and return error. Reproducer: $ cat a.bpf.c extern int foo(void); int bar(void) { return foo(); } $ cat b.bpf.c int foo(void) { return 0; } $ clang -O2 -target bpf -c a.bpf.c $ clang -O2 -target bpf -c b.bpf.c $ bpftool gen obj out a.bpf.o b.bpf.o Segmentation fault (core dumped) After fix: $ bpftool gen obj out a.bpf.o b.bpf.o libbpf: failed to find BTF info for object 'a.bpf.o' Error: failed to link 'a.bpf.o': Unknown error -22 (-22) Fixes: a46349227cd8 (libbpf: Add linker extern resolution support for functions and global variables) Signed-off-by: Kumar Kartikeya Dwivedi <[email protected]> Signed-off-by: Andrii Nakryiko <[email protected]> Signed-off-by: Daniel Borkmann <[email protected]> Link: https://lore.kernel.org/bpf/[email protected]
2021-09-27libbpf: Ignore STT_SECTION symbols in 'maps' sectionToke Høiland-Jørgensen1-2/+3
When parsing legacy map definitions, libbpf would error out when encountering an STT_SECTION symbol. This becomes a problem because some versions of binutils will produce SECTION symbols for every section when processing an ELF file, so BPF files run through 'strip' will end up with such symbols, making libbpf refuse to load them. There's not really any reason why erroring out is strictly necessary, so change libbpf to just ignore SECTION symbols when parsing the ELF. Signed-off-by: Toke Høiland-Jørgensen <[email protected]> Signed-off-by: Andrii Nakryiko <[email protected]> Link: https://lore.kernel.org/bpf/[email protected]
2021-09-28selftests: xsk: Add frame_headroom testMagnus Karlsson2-11/+44
Add a test for the frame_headroom feature that can be set on the umem. The logic added validates that all offsets in all tests and packets are valid, not just the ones that have a specifically configured frame_headroom. Signed-off-by: Magnus Karlsson <[email protected]> Signed-off-by: Daniel Borkmann <[email protected]> Link: https://lore.kernel.org/bpf/[email protected]
2021-09-28selftests: xsk: Change interleaving of packets in unaligned modeMagnus Karlsson1-3/+3
Change the interleaving of packets in unaligned mode. With the current buffer addresses in the packet stream, the last buffer in the umem could not be used as a large packet could potentially write over the end of the umem. The kernel correctly threw this buffer address away and refused to use it. This is perfectly fine for all regular packet streams, but the ones used for unaligned mode have every other packet being at some different offset. As we will add checks for correct offsets in the next patch, this needs to be fixed. Just start these page-boundary straddling buffers one page earlier so that the last one is not on the last page of the umem, making all buffers valid. Signed-off-by: Magnus Karlsson <[email protected]> Signed-off-by: Daniel Borkmann <[email protected]> Link: https://lore.kernel.org/bpf/[email protected]
2021-09-28selftests: xsk: Add single packet testMagnus Karlsson2-0/+14
Add a test where a single packet is sent and received. This might sound like a silly test, but since many of the interfaces in xsk are batched, it is important to be able to validate that we did not break something as fundamental as just receiving single packets, instead of batches of packets at high speed. Signed-off-by: Magnus Karlsson <[email protected]> Signed-off-by: Daniel Borkmann <[email protected]> Link: https://lore.kernel.org/bpf/[email protected]
2021-09-28selftests: xsk: Introduce pacing of trafficMagnus Karlsson2-7/+29
Introduce pacing of traffic so that the Tx thread can never send more packets than the receiver has processed plus the number of packets it can have in its umem. So at any point in time, the number of in flight packets (not processed by the Rx thread) are less than or equal to the number of packets that can be held in the Rx thread's umem. The batch size is also increased to improve running time. Signed-off-by: Magnus Karlsson <[email protected]> Signed-off-by: Daniel Borkmann <[email protected]> Link: https://lore.kernel.org/bpf/[email protected]
2021-09-28selftests: xsk: Fix socket creation retryMagnus Karlsson1-6/+5
The socket creation retry unnecessarily registered the umem once for every retry. No reason to do this. It wastes memory and it might lead to too many pages being locked at some point and the failure of a test. Signed-off-by: Magnus Karlsson <[email protected]> Signed-off-by: Daniel Borkmann <[email protected]> Link: https://lore.kernel.org/bpf/[email protected]
2021-09-28selftests: xsk: Put the same buffer only once in the fill ringMagnus Karlsson1-6/+11
Fix a problem where the fill ring was populated with too many entries. If number of buffers in the umem was smaller than the fill ring size, the code used to loop over from the beginning of the umem and start putting the same buffers in again. This is racy indeed as a later packet can be received overwriting an earlier one before the Rx thread manages to validate it. Signed-off-by: Magnus Karlsson <[email protected]> Signed-off-by: Daniel Borkmann <[email protected]> Link: https://lore.kernel.org/bpf/[email protected]
2021-09-28selftests: xsk: Fix missing initializationMagnus Karlsson1-0/+7
Fix missing initialization of the member rx_pkt_nb in the packet stream. This leads to some tests declaring success too early as the test thought all packets had already been received. Signed-off-by: Magnus Karlsson <[email protected]> Signed-off-by: Daniel Borkmann <[email protected]> Link: https://lore.kernel.org/bpf/[email protected]
2021-09-27Merge tag 'perf-tools-fixes-for-v5.15-2021-09-27' of ↵Linus Torvalds20-43/+70
git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux Pull more perf tools fixes from Arnaldo Carvalho de Melo: - Fix 'perf test' DWARF unwind for optimized builds. - Fix 'perf test' 'Object code reading' when dealing with samples in @plt symbols. - Fix off-by-one directory paths in the ARM support code. - Fix error message to eliminate confusion in 'perf config' when first creating a config file. - 'perf iostat' fix for system wide operation. - Fix printing of metrics when 'perf iostat' is used with one or more iio_root_ports and unconnected cpus (using -C). - Fix several typos in the documentation files. - Fix spelling mistake "icach" -> "icache" in the power8 JSON vendor files. * tag 'perf-tools-fixes-for-v5.15-2021-09-27' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux: perf iostat: Fix Segmentation fault from NULL 'struct perf_counts_values *' perf iostat: Use system-wide mode if the target cpu_list is unspecified perf config: Refine error message to eliminate confusion perf doc: Fix typos all over the place perf arm: Fix off-by-one directory paths. perf vendor events powerpc: Fix spelling mistake "icach" -> "icache" perf tests: Fix flaky test 'Object code reading' perf test: Fix DWARF unwind for optimized builds.
2021-09-27Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvmLinus Torvalds12-61/+219
Pull kvm fixes from Paolo Bonzini: "A bit late... I got sidetracked by back-from-vacation routines and conferences. But most of these patches are already a few weeks old and things look more calm on the mailing list than what this pull request would suggest. x86: - missing TLB flush - nested virtualization fixes for SMM (secure boot on nested hypervisor) and other nested SVM fixes - syscall fuzzing fixes - live migration fix for AMD SEV - mirror VMs now work for SEV-ES too - fixes for reset - possible out-of-bounds access in IOAPIC emulation - fix enlightened VMCS on Windows 2022 ARM: - Add missing FORCE target when building the EL2 object - Fix a PMU probe regression on some platforms Generic: - KCSAN fixes selftests: - random fixes, mostly for clang compilation" * tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (43 commits) selftests: KVM: Explicitly use movq to read xmm registers selftests: KVM: Call ucall_init when setting up in rseq_test KVM: Remove tlbs_dirty KVM: X86: Synchronize the shadow pagetable before link it KVM: X86: Fix missed remote tlb flush in rmap_write_protect() KVM: x86: nSVM: don't copy virt_ext from vmcb12 KVM: x86: nSVM: test eax for 4K alignment for GP errata workaround KVM: x86: selftests: test simultaneous uses of V_IRQ from L1 and L0 KVM: x86: nSVM: restore int_vector in svm_clear_vintr kvm: x86: Add AMD PMU MSRs to msrs_to_save_all[] KVM: x86: nVMX: re-evaluate emulation_required on nested VM exit KVM: x86: nVMX: don't fail nested VM entry on invalid guest state if !from_vmentry KVM: x86: VMX: synthesize invalid VM exit when emulating invalid guest state KVM: x86: nSVM: refactor svm_leave_smm and smm_enter_smm KVM: x86: SVM: call KVM_REQ_GET_NESTED_STATE_PAGES on exit from SMM mode KVM: x86: reset pdptrs_from_userspace when exiting smm KVM: x86: nSVM: restore the L1 host state prior to resuming nested guest on SMM exit KVM: nVMX: Filter out all unsupported controls when eVMCS was activated KVM: KVM: Use cpumask_available() to check for NULL cpumask when kicking vCPUs KVM: Clean up benign vcpu->cpu data races when kicking vCPUs ...
2021-09-27selftests: drivers/dma-buf: Fix implicit declaration warnsShuah Khan1-1/+4
udmabuf has the following implicit declaration warns: udmabuf.c:30:10: warning: implicit declaration of function 'open'; udmabuf.c:42:8: warning: implicit declaration of function 'fcntl' These are caused due to not including fcntl.h and including just linux/fcntl.h. Fix it to include fcntl.h which will bring in the linux/fcntl.h. In addition, define __EXPORTED_HEADERS__ to bring in F_ADD_SEALS and F_SEAL_SHRINK defines and fix the following error that show up when just fcntl.h is included. udmabuf.c:45:21: error: 'F_ADD_SEALS' undeclared 45 | ret = fcntl(memfd, F_ADD_SEALS, F_SEAL_SHRINK); | ^~~~~~~~~~~ udmabuf.c:45:34: error: 'F_SEAL_SHRINK' undeclared 45 | ret = fcntl(memfd, F_ADD_SEALS, F_SEAL_SHRINK); | ^~~~~~~~~~~~~ Signed-off-by: Shuah Khan <[email protected]>
2021-09-27perf iostat: Fix Segmentation fault from NULL 'struct perf_counts_values *'Like Xu1-1/+1
If the 'perf iostat' user specifies two or more iio_root_ports and also specifies the cpu(s) by -C which is not *connected to all* the above iio ports, the iostat_print_metric() will run into trouble: For example: $ perf iostat list S0-uncore_iio_0<0000:16> S1-uncore_iio_0<0000:97> # <--- CPU 1 is located in the socket S0 $ perf iostat 0000:16,0000:97 -C 1 -- ls port Inbound Read(MB) Inbound Write(MB) Outbound Read(MB) Outbound Write(MB) ../perf-iostat: line 12: 104418 Segmentation fault (core dumped) perf stat --iostat$DELIMITER$* The core-dump stack says, in the above corner case, the returned (struct perf_counts_values *) count will be NULL, and the caller iostat_print_metric() apparently doesn't not handle this case. 433 struct perf_counts_values *count = perf_counts(evsel->counts, die, 0); 434 435 if (count->run && count->ena) { (gdb) p count $1 = (struct perf_counts_values *) 0x0 The deeper reason is that there are actually no statistics from the user specified pair "iostat 0000:X, -C (disconnected) Y ", but let's fix it with minimum cost by adding a NULL check in the user space. Fixes: f9ed693e8bc0e7de ("perf stat: Enable iostat mode for x86 platforms") Signed-off-by: Like Xu <[email protected]> Cc: Alexander Antonov <[email protected]> Cc: Alexander Shishkin <[email protected]> Cc: Ian Rogers <[email protected]> Cc: Jiri Olsa <[email protected]> Cc: Mark Rutland <[email protected]> Cc: Namhyung Kim <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: Stephane Eranian <[email protected]> Link: http://lore.kernel.org/lkml/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2021-09-27perf iostat: Use system-wide mode if the target cpu_list is unspecifiedLike Xu1-0/+2
An iostate use case like "perf iostat 0000:16,0000:97 -- ls" should be implemented to work in system-wide mode to ensure that the output from print_header() is consistent with the user documentation perf-iostat.txt, rather than incorrectly assuming that the kernel does not support it: Error: The sys_perf_event_open() syscall returned with 22 (Invalid argument) \ for event (uncore_iio_0/event=0x83,umask=0x04,ch_mask=0xF,fc_mask=0x07/). /bin/dmesg | grep -i perf may provide additional information. This error is easily fixed by assigning system-wide mode by default for IOSTAT_RUN only when the target cpu_list is unspecified. Fixes: f07952b179697771 ("perf stat: Basic support for iostat in perf") Signed-off-by: Like Xu <[email protected]> Cc: Alexander Antonov <[email protected]> Cc: Alexander Shishkin <[email protected]> Cc: Ian Rogers <[email protected]> Cc: Jiri Olsa <[email protected]> Cc: Mark Rutland <[email protected]> Cc: Namhyung Kim <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: Stephane Eranian <[email protected]> Link: http://lore.kernel.org/lkml/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2021-09-27perf annotate: Add riscv64 supportWilliam Cohen2-0/+39
This patch adds basic arch initialization and instruction associate support for the riscv64 CPU architecture. Example output: $ perf annotate --stdio2 Samples: 122K of event 'task-clock:u', 4000 Hz, Event count (approx.): 30637250000, [percent: local period] strcmp() /usr/lib64/libc-2.32.so Percent Disassembly of section .text: 0000000000069a30 <strcmp>: __GI_strcmp(): const unsigned char *s2 = (const unsigned char *) p2; unsigned char c1, c2; do { c1 = (unsigned char) *s1++; 37.30 lbu a5,0(a0) c2 = (unsigned char) *s2++; 1.23 addi a1,a1,1 c1 = (unsigned char) *s1++; 18.68 addi a0,a0,1 c2 = (unsigned char) *s2++; 1.37 lbu a4,-1(a1) if (c1 == '\0') 18.71 ↓ beqz a5,18 return c1 - c2; } Signed-off-by: William Cohen <[email protected]> Cc: Albert Ou <[email protected]> Cc: Alexander Shishkin <[email protected]> Cc: Jiri Olsa <[email protected]> Cc: Mark Rutland <[email protected]> Cc: Namhyung Kim <[email protected]> Cc: Palmer Dabbelt <[email protected]> Cc: Paul Walmsley <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: [email protected] Link: http://lore.kernel.org/lkml/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2021-09-27perf config: Refine error message to eliminate confusionLike Xu1-1/+1
If there is no configuration file at first, the user can write any pair of "key.subkey=value" to the newly created configuration file, while value validation against a valid configurable key is *deferred* until the next execution or the implied execution of "perf config ... ". For example: $ rm ~/.perfconfig $ perf config call-graph.dump-size=65529 $ cat ~/.perfconfig # this file is auto-generated. [call-graph] dump-size = 65529 $ perf config call-graph.dump-size=2048 callchain: Incorrect stack dump size (max 65528): 65529 Error: wrong config key-value pair call-graph.dump-size=65529 The user might expect that the second value 2048 is valid and can be updated to the configuration file, but the error message is very confusing because the first value 65529 is not reported as an error during the last configuration. It is recommended not to change the current behavior of delayed validation (as more effort is needed), but to refine the original error message to *clearly indicate* that the cause of the error is the configuration file. Signed-off-by: Like Xu <[email protected]> Acked-by: Ian Rogers <[email protected]> Cc: Jiri Olsa <[email protected]> Cc: Mark Rutland <[email protected]> Cc: Namhyung Kim <[email protected]> Cc: Peter Zijlstra <[email protected]> Link: http://lore.kernel.org/lkml/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2021-09-27perf doc: Fix typos all over the placeLike Xu8-8/+8
Considering that perf and its subcommands have so many parameters, the documentation is always the first stop for perf beginners. Fixing some spelling errors will relax the eyes of some readers a little bit. s/specicfication/specification/ s/caheline/cacheline/ s/tranasaction/transaction/ s/complan/complain/ s/sched_wakep/sched_wakeup/ s/possble/possible/ s/methology/methodology/ Signed-off-by: Like Xu <[email protected]> Acked-by: Ian Rogers <[email protected]> Cc: Alexander Shishkin <[email protected]> Cc: Jiri Olsa <[email protected]> Cc: Jonathan Corbet <[email protected]> Cc: Mark Rutland <[email protected]> Cc: Namhyung Kim <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: Stephane Eranian <[email protected]> Link: http://lore.kernel.org/lkml/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2021-09-27perf arm: Fix off-by-one directory paths.Ian Rogers6-23/+23
Relative path include works in the regular build due to -I paths but may fail in other situations. v2. Rebase. Comments on v1 were that we should handle include paths differently and it is agreed that can be a sensible refactor but beyond the scope of this change. https://lore.kernel.org/lkml/[email protected]/ Signed-off-by: Ian Rogers <[email protected]> Cc: Alexander Shishkin <[email protected]> Cc: Jiri Olsa <[email protected]> Cc: John Garry <[email protected]> Cc: Leo Yan <[email protected]> Cc: Mark Rutland <[email protected]> Cc: Mathieu Poirier <[email protected]> Cc: Namhyung Kim <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: Sergey Senozhatsky <[email protected]> Cc: Stephane Eranian <[email protected]> Cc: Will Deacon <[email protected]> Cc: [email protected] Link: http://lore.kernel.org/lkml/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2021-09-27perf vendor events powerpc: Fix spelling mistake "icach" -> "icache"Colin Ian King1-1/+1
There is a spelling mistake in the description text, fix it. Signed-off-by: Colin King <[email protected]> Acked-by: Ian Rogers <[email protected]> Cc: Alexander Shishkin <[email protected]> Cc: Jiri Olsa <[email protected]> Cc: Mark Rutland <[email protected]> Cc: Namhyung Kim <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: [email protected] Link: http://lore.kernel.org/lkml/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2021-09-27perf tests: Fix flaky test 'Object code reading'James Clark1-2/+2
This test occasionally fails on aarch64 when a sample is taken in free@plt and it fails with "Bytes read differ from those read by objdump". This is because that symbol is near a section boundary in the elf file. Despite the -z option to always output zeros, objdump uses bfd_map_over_sections() to iterate through the elf file so it doesn't see outside of the sections where these zeros are and can't print them. For example this boundary proceeds free@plt in libc with a gap of 48 bytes between .plt and .text: objdump -d -z --start-address=0x23cc8 --stop-address=0x23d08 libc-2.30.so libc-2.30.so: file format elf64-littleaarch64 Disassembly of section .plt: 0000000000023cc8 <*ABS*+0x7fd00@plt+0x8>: 23cc8: 91018210 add x16, x16, #0x60 23ccc: d61f0220 br x17 Disassembly of section .text: 0000000000023d00 <abort@@GLIBC_2.17-0x98>: 23d00: a9bf7bfd stp x29, x30, [sp, #-16]! 23d04: 910003fd mov x29, sp Taking a sample in free@plt is very rare because it is so small, but the test can be forced to fail almost every time on any platform by linking the test with a shared library that has a single empty function and calling it in a loop. The fix is to zero the buffers so that when there is a jump in the addresses output by objdump, zeros are already filled in between. Signed-off-by: James Clark <[email protected]> Cc: Alexander Shishkin <[email protected]> Cc: Jiri Olsa <[email protected]> Cc: Mark Rutland <[email protected]> Cc: Namhyung Kim <[email protected]> Link: http://lore.kernel.org/lkml/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2021-09-27perf test: Fix DWARF unwind for optimized builds.Ian Rogers1-7/+32
To ensure the stack frames are on the stack tail calls optimizations need to be inhibited. If your compiler supports an attribute use it, otherwise use an asm volatile barrier. The barrier fix was suggested here: https://lore.kernel.org/lkml/[email protected]/ Tested with an optimized clang build and by forcing the asm barrier route with an optimized clang build. A GCC bug tracking a proper disable_tail_calls is: https://gcc.gnu.org/bugzilla/show_bug.cgi?id=97831 Fixes: 9ae1e990f1ab ("perf tools: Remove broken __no_tail_call attribute") v2. is a rebase. The original fix patch generated quite a lot of discussion over the right place for the fix: https://lore.kernel.org/lkml/[email protected]/ The patch reflects my preference of it being near the use, so that future code cleanups don't break this somewhat special usage. Signed-off-by: Ian Rogers <[email protected]> Acked-by: Jiri Olsa <[email protected]> Cc: Alexander Shishkin <[email protected]> Cc: Ard Biesheuvel <[email protected]> Cc: Mark Rutland <[email protected]> Cc: Miguel Ojeda <[email protected]> Cc: Namhyung Kim <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: Stephane Eranian <[email protected]> Cc: [email protected] Link: http://lore.kernel.org/lkml/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2021-09-27selftests: net: fib_nexthops: Wait before checking reported idle timePetr Machata1-0/+1
The purpose of this test is to verify that after a short activity passes, the reported time is reasonable: not zero (which could be reported by mistake), and not something outrageous (which would be indicative of an issue in used units). However, the idle time is reported in units of clock_t, or hundredths of second. If the initial sequence of commands is very quick, it is possible that the idle time is reported as just flat-out zero. When this test was recently enabled in our nightly regression, we started seeing spurious failures for exactly this reason. Therefore buffer the delay leading up to the test with a sleep, to make sure there is no legitimate way of reporting 0. Signed-off-by: Petr Machata <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2021-09-26bpf: selftest: Add verifier tests for <8-byte scalar spill and refillMartin KaFai Lau1-0/+161
This patch adds a few verifier tests for <8-byte spill and refill. Signed-off-by: Martin KaFai Lau <[email protected]> Signed-off-by: Alexei Starovoitov <[email protected]> Link: https://lore.kernel.org/bpf/[email protected]
2021-09-26bpf: selftest: A bpf prog that has a 32bit scalar spillMartin KaFai Lau3-0/+393
It is a simplified example that can trigger a 32bit scalar spill. The const scalar is refilled and added to a skb->data later. Since the reg state of the 32bit scalar spill is not saved now, adding the refilled reg to skb->data and then comparing it with skb->data_end cannot verify the skb->data access. With the earlier verifier patch and the llvm patch [1]. The verifier can correctly verify the bpf prog. Here is the snippet of the verifier log that leads to verifier conclusion that the packet data is unsafe to read. The log is from the kerne without the previous verifier patch to save the <8-byte scalar spill. 67: R0=inv1 R1=inv17 R2=invP2 R3=inv1 R4=pkt(id=0,off=68,r=102,imm=0) R5=inv102 R6=pkt(id=0,off=62,r=102,imm=0) R7=pkt(id=0,off=0,r=102,imm=0) R8=pkt_end(id=0,off=0,imm=0) R9=inv17 R10=fp0 67: (63) *(u32 *)(r10 -12) = r5 68: R0=inv1 R1=inv17 R2=invP2 R3=inv1 R4=pkt(id=0,off=68,r=102,imm=0) R5=inv102 R6=pkt(id=0,off=62,r=102,imm=0) R7=pkt(id=0,off=0,r=102,imm=0) R8=pkt_end(id=0,off=0,imm=0) R9=inv17 R10=fp0 fp-16=mmmm???? ... 101: R0_w=map_value_or_null(id=2,off=0,ks=16,vs=1,imm=0) R6_w=pkt(id=0,off=70,r=102,imm=0) R7=pkt(id=0,off=0,r=102,imm=0) R8=pkt_end(id=0,off=0,imm=0) R9=inv17 R10=fp0 fp-16=mmmmmmmm 101: (61) r1 = *(u32 *)(r10 -12) 102: R0_w=map_value_or_null(id=2,off=0,ks=16,vs=1,imm=0) R1_w=inv(id=0,umax_value=4294967295,var_off=(0x0; 0xffffffff)) R6_w=pkt(id=0,off=70,r=102,imm=0) R7=pkt(id=0,off=0,r=102,imm=0) R8=pkt_end(id=0,off=0,imm=0) R9=inv17 R10=fp0 fp-16=mmmmmmmm 102: (bc) w1 = w1 103: R0_w=map_value_or_null(id=2,off=0,ks=16,vs=1,imm=0) R1_w=inv(id=0,umax_value=4294967295,var_off=(0x0; 0xffffffff)) R6_w=pkt(id=0,off=70,r=102,imm=0) R7=pkt(id=0,off=0,r=102,imm=0) R8=pkt_end(id=0,off=0,imm=0) R9=inv17 R10=fp0 fp-16=mmmmmmmm 103: (0f) r7 += r1 last_idx 103 first_idx 67 regs=2 stack=0 before 102: (bc) w1 = w1 regs=2 stack=0 before 101: (61) r1 = *(u32 *)(r10 -12) 104: R0_w=map_value_or_null(id=2,off=0,ks=16,vs=1,imm=0) R1_w=invP(id=0,umax_value=4294967295,var_off=(0x0; 0xffffffff)) R6_w=pkt(id=0,off=70,r=102,imm=0) R7_w=pkt(id=3,off=0,r=0,umax_value=4294967295,var_off=(0x0; 0xffffffff)) R8=pkt_end(id=0,off=0,imm=0) R9=inv17 R10=fp0 fp-16=mmmmmmmm ... 127: R0_w=inv1 R1=invP(id=0,umax_value=4294967295,var_off=(0x0; 0xffffffff)) R6=pkt(id=0,off=70,r=102,imm=0) R7=pkt(id=3,off=0,r=0,umax_value=4294967295,var_off=(0x0; 0xffffffff)) R8=pkt_end(id=0,off=0,imm=0) R9_w=invP17 R10=fp0 fp-16=mmmmmmmm 127: (bf) r1 = r7 128: R0_w=inv1 R1_w=pkt(id=3,off=0,r=0,umax_value=4294967295,var_off=(0x0; 0xffffffff)) R6=pkt(id=0,off=70,r=102,imm=0) R7=pkt(id=3,off=0,r=0,umax_value=4294967295,var_off=(0x0; 0xffffffff)) R8=pkt_end(id=0,off=0,imm=0) R9_w=invP17 R10=fp0 fp-16=mmmmmmmm 128: (07) r1 += 8 129: R0_w=inv1 R1_w=pkt(id=3,off=8,r=0,umax_value=4294967295,var_off=(0x0; 0xffffffff)) R6=pkt(id=0,off=70,r=102,imm=0) R7=pkt(id=3,off=0,r=0,umax_value=4294967295,var_off=(0x0; 0xffffffff)) R8=pkt_end(id=0,off=0,imm=0) R9_w=invP17 R10=fp0 fp-16=mmmmmmmm 129: (b4) w0 = 1 130: R0=inv1 R1=pkt(id=3,off=8,r=0,umax_value=4294967295,var_off=(0x0; 0xffffffff)) R6=pkt(id=0,off=70,r=102,imm=0) R7=pkt(id=3,off=0,r=0,umax_value=4294967295,var_off=(0x0; 0xffffffff)) R8=pkt_end(id=0,off=0,imm=0) R9=invP17 R10=fp0 fp-16=mmmmmmmm 130: (2d) if r1 > r8 goto pc-66 R0=inv1 R1=pkt(id=3,off=8,r=0,umax_value=4294967295,var_off=(0x0; 0xffffffff)) R6=pkt(id=0,off=70,r=102,imm=0) R7=pkt(id=3,off=0,r=0,umax_value=4294967295,var_off=(0x0; 0xffffffff)) R8=pkt_end(id=0,off=0,imm=0) R9=invP17 R10=fp0 fp-16=mmmmmmmm 131: R0=inv1 R1=pkt(id=3,off=8,r=0,umax_value=4294967295,var_off=(0x0; 0xffffffff)) R6=pkt(id=0,off=70,r=102,imm=0) R7=pkt(id=3,off=0,r=0,umax_value=4294967295,var_off=(0x0; 0xffffffff)) R8=pkt_end(id=0,off=0,imm=0) R9=invP17 R10=fp0 fp-16=mmmmmmmm 131: (69) r6 = *(u16 *)(r7 +0) invalid access to packet, off=0 size=2, R7(id=3,off=0,r=0) R7 offset is outside of the packet [1]: https://reviews.llvm.org/D109073 Signed-off-by: Martin KaFai Lau <[email protected]> Signed-off-by: Alexei Starovoitov <[email protected]> Link: https://lore.kernel.org/bpf/[email protected]
2021-09-26Merge tag 'x86-urgent-2021-09-26' of ↵Linus Torvalds1-2/+2
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 fixes from Thomas Gleixner: "A set of fixes for X86: - Prevent sending the wrong signal when protection keys are enabled and the kernel handles a fault in the vsyscall emulation. - Invoke early_reserve_memory() before invoking e820_memory_setup() which is required to make the Xen dom0 e820 hooks work correctly. - Use the correct data type for the SETZ operand in the EMQCMDS instruction wrapper. - Prevent undefined behaviour to the potential unaligned accesss in the instruction decoder library" * tag 'x86-urgent-2021-09-26' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/insn, tools/x86: Fix undefined behavior due to potential unaligned accesses x86/asm: Fix SETZ size enqcmds() build failure x86/setup: Call early_reserve_memory() earlier x86/fault: Fix wrong signal when vsyscall fails with pkey
2021-09-25Merge branch 'akpm' (patches from Andrew)Linus Torvalds1-1/+1
Merge misc fixes from Andrew Morton: "16 patches. Subsystems affected by this patch series: xtensa, sh, ocfs2, scripts, lib, and mm (memory-failure, kasan, damon, shmem, tools, pagecache, debug, and pagemap)" * emailed patches from Andrew Morton <[email protected]>: mm: fix uninitialized use in overcommit_policy_handler mm/memory_failure: fix the missing pte_unmap() call kasan: always respect CONFIG_KASAN_STACK sh: pgtable-3level: fix cast to pointer from integer of different size mm/debug: sync up latest migrate_reason to migrate_reason_names mm/debug: sync up MR_CONTIG_RANGE and MR_LONGTERM_PIN mm: fs: invalidate bh_lrus for only cold path lib/zlib_inflate/inffast: check config in C to avoid unused function warning tools/vm/page-types: remove dependency on opt_file for idle page tracking scripts/sorttable: riscv: fix undeclared identifier 'EM_RISCV' error ocfs2: drop acl cache for directories too mm/shmem.c: fix judgment error in shmem_is_huge() xtensa: increase size of gcc stack frame check mm/damon: don't use strnlen() with known-bogus source length kasan: fix Kconfig check of CC_HAS_WORKING_NOSANITIZE_ADDRESS mm, hwpoison: add is_free_buddy_page() in HWPoisonHandlable()
2021-09-25Merge tag 'linux-kselftest-fixes-5.15-rc3' of ↵Linus Torvalds6-33/+27
git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest Pull Kselftest fixes from Shuah Khan: - fix to Kselftest common framework header install to run before other targets for it work correctly in parallel build case. - fixes to kvm test to not ignore fscanf() returns which could result in inconsistent test behavior and failures. * tag 'linux-kselftest-fixes-5.15-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest: selftests: kvm: fix get_run_delay() ignoring fscanf() return warn selftests: kvm: move get_run_delay() into lib/test_util selftests:kvm: fix get_trans_hugepagesz() ignoring fscanf() return warn selftests:kvm: fix get_warnings_count() ignoring fscanf() return warn selftests: be sure to make khdr before other targets
2021-09-25Merge tag 'usb-5.15-rc3' of ↵Linus Torvalds1-6/+8
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb Pull USB driver fixes from Greg KH: "Here are some USB driver fixes and new device ids for 5.15-rc3. They include: - usb-storage quirk additions - usb-serial new device ids - usb-serial driver fixes - USB roothub registration bugfix to resolve a long-reported issue - usb gadget driver fixes for a large number of small things - dwc2 driver fixes All of these have been in linux-next for a while with no reported issues" * tag 'usb-5.15-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (28 commits) USB: serial: option: add device id for Foxconn T99W265 USB: serial: cp210x: add ID for GW Instek GDM-834x Digital Multimeter USB: serial: cp210x: add part-number debug printk USB: serial: cp210x: fix dropped characters with CP2102 MAINTAINERS: usb, update Peter Korsgaard's entries usb: musb: tusb6010: uninitialized data in tusb_fifo_write_unaligned() usb-storage: Add quirk for ScanLogic SL11R-IDE older than 2.6c Re-enable UAS for LaCie Rugged USB3-FW with fk quirk USB: serial: option: remove duplicate USB device ID USB: serial: mos7840: remove duplicated 0xac24 device ID arm64: dts: qcom: ipq8074: remove USB tx-fifo-resize property usb: gadget: f_uac2: Populate SS descriptors' wBytesPerInterval usb: gadget: f_uac2: Add missing companion descriptor for feedback EP usb: dwc2: gadget: Fix ISOC transfer complete handling for DDMA usb: core: hcd: Modularize HCD stop configuration in usb_stop_hcd() xhci: Set HCD flag to defer primary roothub registration usb: core: hcd: Add support for deferring roothub registration usb: dwc2: gadget: Fix ISOC flow for BDMA and Slave usb: dwc3: core: balance phy init and exit Revert "USB: bcma: Add a check for devm_gpiod_get" ...
2021-09-24Merge git://git.kernel.org/pub/scm/linux/kernel/git/pablo/nfJakub Kicinski2-0/+465
Pablo Neira Ayuso says: ==================== Netfilter/IPVS fixes for net 1) ipset limits the max allocatable memory via kvmalloc() to MAX_INT, from Jozsef Kadlecsik. 2) Check ip_vs_conn_tab_bits value to be in the range specified in Kconfig, from Andrea Claudi. 3) Initialize fragment offset in ip6tables, from Jeremy Sowden. 4) Make conntrack hash chain length random, from Florian Westphal. 5) Add zone ID to conntrack and NAT hashtuple again, also from Florian. 6) Add selftests for bidirectional zone support and colliding tuples, from Florian Westphal. 7) Unlink table before synchronize_rcu when cleaning tables with owner, from Florian. 8) ipset limits the max allocatable memory via kvmalloc() to MAX_INT. 9) Release conntrack entries via workqueue in masquerade, from Florian. 10) Fix bogus net_init in iptables raw table definition, also from Florian. 11) Work around missing softdep in log extensions, from Florian Westphal. 12) Serialize hash resizes and cleanups with mutex, from Eric Dumazet. * git://git.kernel.org/pub/scm/linux/kernel/git/pablo/nf: netfilter: conntrack: serialize hash resizes and cleanups netfilter: log: work around missing softdep backend module netfilter: iptable_raw: drop bogus net_init annotation netfilter: nf_nat_masquerade: defer conntrack walk to work queue netfilter: nf_nat_masquerade: make async masq_inet6_event handling generic netfilter: nf_tables: Fix oversized kvmalloc() calls netfilter: nf_tables: unlink table before deleting it selftests: netfilter: add zone stress test with colliding tuples selftests: netfilter: add selftest for directional zone support netfilter: nat: include zone id in nat table hash again netfilter: conntrack: include zone id in tuple hash again netfilter: conntrack: make max chain length random netfilter: ip6_tables: zero-initialize fragment offset ipvs: check that ip_vs_conn_tab_bits is between 8 and 20 netfilter: ipset: Fix oversized kvmalloc() calls ==================== Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2021-09-24tools/vm/page-types: remove dependency on opt_file for idle page trackingChangbin Du1-1/+1
Idle page tracking can also be used for process address space, not only file mappings. Without this change, using with '-i' option for process address space encounters below errors reported. $ sudo ./page-types -p $(pidof bash) -i mark page idle: Bad file descriptor mark page idle: Bad file descriptor mark page idle: Bad file descriptor mark page idle: Bad file descriptor ... Link: https://lkml.kernel.org/r/[email protected] Signed-off-by: Changbin Du <[email protected]> Signed-off-by: Andrew Morton <[email protected]> Signed-off-by: Linus Torvalds <[email protected]>
2021-09-24selftests/bpf: Fix btf_dump __int128 test failure with clang build kernelYonghong Song1-6/+21
With clang build kernel (adding LLVM=1 to kernel and selftests/bpf build command line), I hit the following test failure: $ ./test_progs -t btf_dump ... btf_dump_data:PASS:ensure expected/actual match 0 nsec btf_dump_data:FAIL:find type id unexpected find type id: actual -2 < expected 0 btf_dump_data:FAIL:find type id unexpected find type id: actual -2 < expected 0 test_btf_dump_int_data:FAIL:dump __int128 unexpected error: -2 (errno 2) #15/9 btf_dump/btf_dump: int_data:FAIL Further analysis showed gcc build kernel has type "__int128" in dwarf/BTF and it doesn't exist in clang build kernel. Code searching for kernel code found the following: arch/s390/include/asm/types.h: unsigned __int128 pair; crypto/ecc.c: unsigned __int128 m = (unsigned __int128)left * right; include/linux/math64.h: return (u64)(((unsigned __int128)a * mul) >> shift); include/linux/math64.h: return (u64)(((unsigned __int128)a * mul) >> shift); lib/ubsan.h:typedef __int128 s_max; lib/ubsan.h:typedef unsigned __int128 u_max; In my case, CONFIG_UBSAN is not enabled. Even if we only have "unsigned __int128" in the code, somehow gcc still put "__int128" in dwarf while clang didn't. Hence current test works fine for gcc but not for clang. Enabling CONFIG_UBSAN is an option to provide __int128 type into dwarf reliably for both gcc and clang, but not everybody enables CONFIG_UBSAN in their kernel build. So the best choice is to use "unsigned __int128" type which is available in both clang and gcc build kernels. But clang and gcc dwarf encoded names for "unsigned __int128" are different: [$ ~] cat t.c unsigned __int128 a; [$ ~] gcc -g -c t.c && llvm-dwarfdump t.o | grep __int128 DW_AT_type (0x00000031 "__int128 unsigned") DW_AT_name ("__int128 unsigned") [$ ~] clang -g -c t.c && llvm-dwarfdump t.o | grep __int128 DW_AT_type (0x00000033 "unsigned __int128") DW_AT_name ("unsigned __int128") The test change in this patch tries to test type name before doing actual test. Signed-off-by: Yonghong Song <[email protected]> Signed-off-by: Andrii Nakryiko <[email protected]> Reviewed-by: Alan Maguire <[email protected]> Link: https://lore.kernel.org/bpf/[email protected]
2021-09-24perf list: Display pmu prefix for partially supported hybrid cache eventsJin Yao1-8/+68
Part of hardware cache events are only available on one CPU PMU. For example, 'L1-dcache-load-misses' is only available on cpu_core. perf list should clearly report this info. root@otcpl-adl-s-2:~# ./perf list Before: L1-dcache-load-misses [Hardware cache event] L1-dcache-loads [Hardware cache event] L1-dcache-stores [Hardware cache event] L1-icache-load-misses [Hardware cache event] L1-icache-loads [Hardware cache event] LLC-load-misses [Hardware cache event] LLC-loads [Hardware cache event] LLC-store-misses [Hardware cache event] LLC-stores [Hardware cache event] branch-load-misses [Hardware cache event] branch-loads [Hardware cache event] dTLB-load-misses [Hardware cache event] dTLB-loads [Hardware cache event] dTLB-store-misses [Hardware cache event] dTLB-stores [Hardware cache event] iTLB-load-misses [Hardware cache event] node-load-misses [Hardware cache event] node-loads [Hardware cache event] node-store-misses [Hardware cache event] node-stores [Hardware cache event] After: L1-dcache-loads [Hardware cache event] L1-dcache-stores [Hardware cache event] L1-icache-load-misses [Hardware cache event] LLC-load-misses [Hardware cache event] LLC-loads [Hardware cache event] LLC-store-misses [Hardware cache event] LLC-stores [Hardware cache event] branch-load-misses [Hardware cache event] branch-loads [Hardware cache event] cpu_atom/L1-icache-loads/ [Hardware cache event] cpu_core/L1-dcache-load-misses/ [Hardware cache event] cpu_core/node-load-misses/ [Hardware cache event] cpu_core/node-loads/ [Hardware cache event] dTLB-load-misses [Hardware cache event] dTLB-loads [Hardware cache event] dTLB-store-misses [Hardware cache event] dTLB-stores [Hardware cache event] iTLB-load-misses [Hardware cache event] Now we can clearly see 'L1-dcache-load-misses' is only available on cpu_core. If without pmu prefix, it indicates the event is available on both cpu_core and cpu_atom. Signed-off-by: Jin Yao <[email protected]> Cc: Alexander Shishkin <[email protected]> Cc: Andi Kleen <[email protected]> Cc: Jin Yao <[email protected]> Cc: Jiri Olsa <[email protected]> Cc: Kan Liang <[email protected]> Cc: Peter Zijlstra <[email protected]> Link: http://lore.kernel.org/lkml/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2021-09-24Merge tag 'arm64-fixes' of ↵Linus Torvalds1-2/+5
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux Pull arm64 fixes from Catalin Marinas: - It turns out that the optimised string routines merged in 5.14 are not safe with in-kernel MTE (KASAN_HW_TAGS) because of reading beyond the end of a string (strcmp, strncmp). Such reading may go across a 16 byte tag granule and cause a tag check fault. When KASAN_HW_TAGS is enabled, use the generic strcmp/strncmp C implementation. - An errata workaround for ThunderX relied on the CPU capabilities being enabled in a specific order. This disappeared with the automatic generation of the cpucaps.h file (sorted alphabetically). Fix it by checking the current CPU only rather than the system-wide capability. - Add system_supports_mte() checks on the kernel entry/exit path and thread switching to avoid unnecessary barriers and function calls on systems where MTE is not supported. - kselftests: skip arm64 tests if the required features are missing. * tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: arm64: Restore forced disabling of KPTI on ThunderX kselftest/arm64: signal: Skip tests if required features are missing arm64: Mitigate MTE issues with str{n}cmp() arm64: add MTE supported check to thread switching and syscall entry/exit
2021-09-24x86/insn, tools/x86: Fix undefined behavior due to potential unaligned accessesNumfor Mbiziwo-Tiapo1-2/+2
Don't perform unaligned loads in __get_next() and __peek_nbyte_next() as these are forms of undefined behavior: "A pointer to an object or incomplete type may be converted to a pointer to a different object or incomplete type. If the resulting pointer is not correctly aligned for the pointed-to type, the behavior is undefined." (from http://www.open-std.org/jtc1/sc22/wg14/www/docs/n1256.pdf) These problems were identified using the undefined behavior sanitizer (ubsan) with the tools version of the code and perf test. [ bp: Massage commit message. ] Signed-off-by: Numfor Mbiziwo-Tiapo <[email protected]> Signed-off-by: Ian Rogers <[email protected]> Signed-off-by: Borislav Petkov <[email protected]> Acked-by: Masami Hiramatsu <[email protected]> Link: https://lkml.kernel.org/r/[email protected]
2021-09-24selftests: KVM: Explicitly use movq to read xmm registersOliver Upton1-17/+17
Compiling the KVM selftests with clang emits the following warning: >> include/x86_64/processor.h:297:25: error: variable 'xmm0' is uninitialized when used here [-Werror,-Wuninitialized] >> return (unsigned long)xmm0; where xmm0 is accessed via an uninitialized register variable. Indeed, this is a misuse of register variables, which really should only be used for specifying register constraints on variables passed to inline assembly. Rather than attempting to read xmm registers via register variables, just explicitly perform the movq from the desired xmm register. Fixes: 783e9e51266e ("kvm: selftests: add API testing infrastructure") Signed-off-by: Oliver Upton <[email protected]> Message-Id: <[email protected]> Reviewed-by: Ricardo Koller <[email protected]> Signed-off-by: Paolo Bonzini <[email protected]>
2021-09-24selftests: KVM: Call ucall_init when setting up in rseq_testOliver Upton1-0/+1
While x86 does not require any additional setup to use the ucall infrastructure, arm64 needs to set up the MMIO address used to signal a ucall to userspace. rseq_test does not initialize the MMIO address, resulting in the test spinning indefinitely. Fix the issue by calling ucall_init() during setup. Fixes: 61e52f1630f5 ("KVM: selftests: Add a test for KVM_RUN+rseq to detect task migration bugs") Signed-off-by: Oliver Upton <[email protected]> Message-Id: <[email protected]> Signed-off-by: Paolo Bonzini <[email protected]>
2021-09-23Merge tag 'for-linus-rseq' of git://git.kernel.org/pub/scm/virt/kvm/kvmLinus Torvalds5-3/+240
Pull rseq fixes from Paolo Bonzini: "A fix for a bug with restartable sequences and KVM. KVM's handling of TIF_NOTIFY_RESUME, e.g. for task migration, clears the flag without informing rseq and leads to stale data in userspace's rseq struct" * tag 'for-linus-rseq' of git://git.kernel.org/pub/scm/virt/kvm/kvm: KVM: selftests: Remove __NR_userfaultfd syscall fallback KVM: selftests: Add a test for KVM_RUN+rseq to detect task migration bugs tools: Move x86 syscall number fallbacks to .../uapi/ entry: rseq: Call rseq_handle_notify_resume() in tracehook_notify_resume() KVM: rseq: Update rseq when processing NOTIFY_RESUME on xfer to KVM guest
2021-09-23Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski12-66/+170
net/mptcp/protocol.c 977d293e23b4 ("mptcp: ensure tx skbs always have the MPTCP ext") efe686ffce01 ("mptcp: ensure tx skbs always have the MPTCP ext") same patch merged in both trees, keep net-next. Signed-off-by: Jakub Kicinski <[email protected]>
2021-09-23Merge tag 'net-5.15-rc3' of ↵Linus Torvalds3-7/+5
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net Pull networking fixes from Jakub Kicinski: "Current release - regressions: - dsa: bcm_sf2: fix array overrun in bcm_sf2_num_active_ports() Previous releases - regressions: - introduce a shutdown method to mdio device drivers, and make DSA switch drivers compatible with masters disappearing on shutdown; preventing infinite reference wait - fix issues in mdiobus users related to ->shutdown vs ->remove - virtio-net: fix pages leaking when building skb in big mode - xen-netback: correct success/error reporting for the SKB-with-fraglist - dsa: tear down devlink port regions when tearing down the devlink port on error - nexthop: fix division by zero while replacing a resilient group - hns3: check queue, vf, vlan ids range before using Previous releases - always broken: - napi: fix race against netpoll causing NAPI getting stuck - mlx4_en: ensure link operstate is updated even if link comes up before netdev registration - bnxt_en: fix TX timeout when TX ring size is set to the smallest - enetc: fix illegal access when reading affinity_hint; prevent oops on sysfs access - mtk_eth_soc: avoid creating duplicate offload entries Misc: - core: correct the sock::sk_lock.owned lockdep annotations" * tag 'net-5.15-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (51 commits) atlantic: Fix issue in the pm resume flow. net/mlx4_en: Don't allow aRFS for encapsulated packets net: mscc: ocelot: fix forwarding from BLOCKING ports remaining enabled net: ethernet: mtk_eth_soc: avoid creating duplicate offload entries nfc: st-nci: Add SPI ID matching DT compatible MAINTAINERS: remove Guvenc Gulce as net/smc maintainer nexthop: Fix memory leaks in nexthop notification chain listeners mptcp: ensure tx skbs always have the MPTCP ext qed: rdma - don't wait for resources under hw error recovery flow s390/qeth: fix deadlock during failing recovery s390/qeth: Fix deadlock in remove_discipline s390/qeth: fix NULL deref in qeth_clear_working_pool_list() net: dsa: realtek: register the MDIO bus under devres net: dsa: don't allocate the slave_mii_bus using devres Doc: networking: Fox a typo in ice.rst net: dsa: fix dsa_tree_setup error path net/smc: fix 'workqueue leaked lock' in smc_conn_abort_work net/smc: add missing error check in smc_clc_prfx_set() net: hns3: fix a return value error in hclge_get_reset_status() net: hns3: check vlan id before using it ...
2021-09-23KVM: x86: selftests: test simultaneous uses of V_IRQ from L1 and L0Maxim Levitsky3-0/+130
Test that if: * L1 disables virtual interrupt masking, and INTR intercept. * L1 setups a virtual interrupt to be injected to L2 and enters L2 with interrupts disabled, thus the virtual interrupt is pending. * Now an external interrupt arrives in L1 and since L1 doesn't intercept it, it should be delivered to L2 when it enables interrupts. to do this L0 (abuses) V_IRQ to setup an interrupt window, and returns to L2. * L2 enables interrupts. This should trigger the interrupt window, injection of the external interrupt and delivery of the virtual interrupt that can now be done. * Test that now L2 gets those interrupts. This is the test that demonstrates the issue that was fixed in the previous patch. Signed-off-by: Maxim Levitsky <[email protected]> Message-Id: <[email protected]> Signed-off-by: Paolo Bonzini <[email protected]>
Powered by cgit, Gruvboxed by Blaster4385.