| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
git://git.kernel.org/pub/scm/linux/kernel/git/frederic/linux-dynticks into perf/hw_breakpoints
Pull AMD range breakpoints support from Frederic Weisbecker:
" - Extend breakpoint tools and core to support address range through perf
event with initial backend support for AMD extended breakpoints.
Syntax is:
perf record -e mem:addr/len:type
For example set write breakpoint from 0x1000 to 0x1200 (0x1000 + 512)
perf record -e mem:0x1000/512:w
- Clean up a bit breakpoint code validation
It has been acked by Jiri and Oleg. "
Signed-off-by: Ingo Molnar <[email protected]>
|
|
Signed-off-by: Jacob Shin <[email protected]>
Signed-off-by: Suravee Suthikulpanit <[email protected]>
Acked-by: Jiri Olsa <[email protected]>
Reviewed-by: Oleg Nesterov <[email protected]>
Cc: Arnaldo Carvalho de Melo <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: xiakaixu <[email protected]>
Signed-off-by: Frederic Weisbecker <[email protected]>
|
|
Currently bp_len is given a default value of 4. Allow user to override it:
$ perf stat -e mem:0x1000/8
^
bp_len
If no value is given, it will default to 4 as it did before.
Signed-off-by: Jacob Shin <[email protected]>
Signed-off-by: Suravee Suthikulpanit <[email protected]>
Acked-by: Jiri Olsa <[email protected]>
Reviewed-by: Oleg Nesterov <[email protected]>
Cc: Arnaldo Carvalho de Melo <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: xiakaixu <[email protected]>
Signed-off-by: Frederic Weisbecker <[email protected]>
|
|
Events may still be ordered even if there are no timestamps e.g. if the
data is recorded per-thread.
Also synthesized COMM events have a timestamp of zero.
Consequently it is better to keep comm entries even if they have a
timestamp of zero.
However, when a struct thread is created the command string is not known
and a comm entry with a string of the form ":<tid>" is used.
In that case thread->comm_set is false and the comm entry should be
overridden.
Signed-off-by: Adrian Hunter <[email protected]>
Cc: David Ahern <[email protected]>
Cc: Frederic Weisbecker <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Paul Mackerras <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Stephane Eranian <[email protected]>
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
Recently added executables Add perf-read-vdso32 and perf-read-vdsox32
need to be added to .gitignore.
Signed-off-by: Adrian Hunter <[email protected]>
Cc: David Ahern <[email protected]>
Cc: Frederic Weisbecker <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Paul Mackerras <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Stephane Eranian <[email protected]>
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
The system_wide flag causes a selected event to be opened always without
a pid.
Consequently it will never get a POLLHUP, but it is used for tracking in
combination with other events, so it should not need to be polled
anyway.
Therefore don't add it for polling.
Signed-off-by: Adrian Hunter <[email protected]>
Cc: David Ahern <[email protected]>
Cc: Frederic Weisbecker <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Paul Mackerras <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Stephane Eranian <[email protected]>
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
Following patch fails (-EINVAL) ftrace:function with enabled user
space callchains:
cfa77bc4af2c perf: Disallow user-space callchains for function trace events
We need to follow in perf tool itself and explicitly set the
perf_event_attr::exclude_callchain_user flag for ftrace:function
event.
Reported-by: Steven Rostedt <[email protected]>
Signed-off-by: Jiri Olsa <[email protected]>
Cc: Corey Ashford <[email protected]>
Cc: David Ahern <[email protected]>
Cc: Frederic Weisbecker <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Paul Mackerras <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Steven Rostedt <[email protected]>
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
Without mmap2, perf diff fails to find the symbol name. The default
symbol sort key doesn't work well.
Signed-off-by: Kan Liang <[email protected]>
Acked-by: Namhyung Kim <[email protected]>
Cc: Andi Kleen <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Namhyung Kim <[email protected]>
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
Problem introduced in:
commit 5b5916696051 "perf report: Honor column width setting"
Where the left justification signal was after the width, which ended up,
when the width was, say, 11, always printing:
%11.11-s
Instead of src:line left justified and limited to 11 chars.
Resulting in a like:
70.93% %11.11-s [.] f2 tcall
When it should instead be:
70.93% tcall.c:5 [.] f2 tcall
Cc: Adrian Hunter <[email protected]>
Cc: Andi Kleen <[email protected]>
Cc: Borislav Petkov <[email protected]>
Cc: David Ahern <[email protected]>
Cc: Don Zickus <[email protected]>
Cc: Frederic Weisbecker <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Mike Galbraith <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Stephane Eranian <[email protected]>
Link: http://lkml.kernel.org/n/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
With srcline key/sort'ing it's useful to have line numbers in the
annotate window. This patch implements this.
Use objdump -l to request the line numbers and save them in the line
structure. Then the browser displays them for source lines.
The line numbers are not displayed by default, but can be toggled on
with 'k'
There is one unfortunate problem with this setup. For lines not
containing source and which are outside functions objdump -l reports
line numbers off by a few: it always reports the first line number in
the next function even for lines that are outside the function.
I haven't found a nice way to detect/correct this. Probably objdump has
to be fixed.
See https://sourceware.org/bugzilla/show_bug.cgi?id=16433
The line numbers are still useful even with these problems, as most are
correct and the ones which are not are nearby.
v2: Fix help text. Handle (discriminator...) output in objdump.
Left align the line numbers.
Signed-off-by: Andi Kleen <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Namhyung Kim <[email protected]>
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
For perf report with --sort srcline only print the base source file
name. This makes the results generally fit much better to the screen.
The path is usually not that useful anyways because it is often from
different systems.
Signed-off-by: Andi Kleen <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Namhyung Kim <[email protected]>
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
Refactor the duplicated code to resolve the symbol name or
the address of a symbol into a single function.
Used in next patch to add common functionality.
Signed-off-by: Andi Kleen <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Namhyung Kim <[email protected]>
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
Use the relative address, this makes get_srcline work correctly in the
end.
Signed-off-by: Andi Kleen <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Namhyung Kim <[email protected]>
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
Move the code to resolve and add a new callchain entry into a new
add_callchain_ip function. This will be used in the next patches to add
LBRs too.
No change in behavior.
Signed-off-by: Andi Kleen <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Namhyung Kim <[email protected]>
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
Patch "perf tools: Fix build-id matching on vmlinux" breaks annotation
with kcore. The problem is that symbol__annotate() first gets the
filename based on the build-id which was previously not set.
This patch provides a quick fix, however there should probably be only
one way to determine the filename. e.g. symbol__annotate() should use
the same way as dso__data_fd().
Signed-off-by: Adrian Hunter <[email protected]>
Cc: David Ahern <[email protected]>
Cc: Frederic Weisbecker <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Paul Mackerras <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Stephane Eranian <[email protected]>
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
Library loading in python syntax should be 'import perf', not 'use perf'.
Signed-off-by: WANG Chao <[email protected]>
Cc: Adrian Hunter <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: Jean Pihet <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Masami Hiramatsu <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Paul Mackerras <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
The minimal ELF loader should not return 1 when it manages to read the
vmlinux build-id, it should instead return 0, meaning that it hasn't
loaded any symbols, since it doesn't parses ELF at all.
That way, the main symbol.c routines will understand that it is
necessary to continue looking for a file with symbols, and when no
libelf is linked, that means it will eventually try kallsyms.
Reported-by: Peter Zijlstra <[email protected]>
Tested-by: Peter Zijlstra <[email protected]>
Cc: Adrian Hunter <[email protected]>
Cc: Borislav Petkov <[email protected]>
Cc: David Ahern <[email protected]>
Cc: Don Zickus <[email protected]>
Cc: Frederic Weisbecker <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Mike Galbraith <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Stephane Eranian <[email protected]>
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
Current EXTLIBS contains -lelf by default and removes it when libelf is
not detected.
This is little bit confusing since we can now build perf without libelf
so there's no need to handle it differently than other libraries.
Signed-off-by: Namhyung Kim <[email protected]>
Cc: Adrian Hunter <[email protected]>
Cc: David Ahern <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Paul Mackerras <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
Also move static variable no_buildid_cache and check it in the
perf_session_cache_build_ids().
Signed-off-by: Namhyung Kim <[email protected]>
Cc: Aravinda Prasad <[email protected]>
Cc: Brendan Gregg <[email protected]>
Cc: Hemant Kumar <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: Masami Hiramatsu <[email protected]>
Cc: Oleg Nesterov <[email protected]>
Cc: Pekka Enberg <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Srikar Dronamraju <[email protected]>
Cc: Vasant Hegde <[email protected]>
Cc: [email protected]
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
Add -I/--intr-regs option to capture machine state registers at
interrupt.
Add the corresponding man page description
Signed-off-by: Stephane Eranian <[email protected]>
Signed-off-by: Peter Zijlstra (Intel) <[email protected]>
Link: http://lkml.kernel.org/r/[email protected]
Cc: [email protected]
Cc: Adrian Hunter <[email protected]>
Cc: Anshuman Khandual <[email protected]>
Cc: Arnaldo Carvalho de Melo <[email protected]>
Cc: Linus Torvalds <[email protected]>
Cc: Masanari Iida <[email protected]>
Signed-off-by: Ingo Molnar <[email protected]>
|
|
This patch updates the sample parsing test with support
for the sampling of machine interrupted state.
The patch modifies the do_test() code to sahred the sample
regts bitmask between user and intr regs.
Signed-off-by: Stephane Eranian <[email protected]>
Signed-off-by: Peter Zijlstra (Intel) <[email protected]>
Cc: [email protected]
Cc: Arnaldo Carvalho de Melo <[email protected]>
Cc: Borislav Petkov <[email protected]>
Cc: Jean Pihet <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Linus Torvalds <[email protected]>
Cc: Rusty Russell <[email protected]>
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Ingo Molnar <[email protected]>
|
|
Add the infrastructure to setup, collect and report the interrupt
machine state regs which can be captured by the kernel.
Signed-off-by: Stephane Eranian <[email protected]>
Signed-off-by: Peter Zijlstra (Intel) <[email protected]>
Cc: [email protected]
Cc: Adrian Hunter <[email protected]>
Cc: Andi Kleen <[email protected]>
Cc: Arnaldo Carvalho de Melo <[email protected]>
Cc: David Ahern <[email protected]>
Cc: Don Zickus <[email protected]>
Cc: Jean Pihet <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Linus Torvalds <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Paul Mackerras <[email protected]>
Cc: Stephane Eranian <[email protected]>
Cc: Waiman Long <[email protected]>
Cc: Wang Nan <[email protected]>
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Ingo Molnar <[email protected]>
|
|
Signed-off-by: Ingo Molnar <[email protected]>
|
|
Pull networking fixes from David Miller:
1) sunhme driver lacks DMA mapping error checks, based upon a report by
Meelis Roos.
2) Fix memory leak in mvpp2 driver, from Sudip Mukherjee.
3) DMA memory allocation sizes are wrong in systemport ethernet driver,
fix from Florian Fainelli.
4) Fix use after free in mac80211 defragmentation code, from Johannes
Berg.
5) Some networking uapi headers missing from Kbuild file, from Stephen
Hemminger.
6) TUN driver gets csum_start offset wrong when VLAN accel is enabled,
and macvtap has a similar bug, from Herbert Xu.
7) Adjust several tunneling drivers to set dev->iflink after registry,
because registry sets that to -1 overwriting whatever we did. From
Steffen Klassert.
8) Geneve forgets to set inner tunneling type, causing GSO segmentation
to fail on some NICs. From Jesse Gross.
9) Fix several locking bugs in stmmac driver, from Fabrice Gasnier and
Giuseppe CAVALLARO.
10) Fix spurious timeouts with NewReno on low traffic connections, from
Marcelo Leitner.
11) Fix descriptor updates in enic driver, from Govindarajulu
Varadarajan.
12) PPP calls bpf_prog_create() with locks held, which isn't kosher.
Fix from Takashi Iwai.
13) Fix NULL deref in SCTP with malformed INIT packets, from Daniel
Borkmann.
14) psock_fanout selftest accesses past the end of the mmap ring, fix
from Shuah Khan.
15) Fix PTP timestamping for VLAN packets, from Richard Cochran.
16) netlink_unbind() calls in netlink pass wrong initial argument, from
Hiroaki SHIMODA.
17) vxlan socket reuse accidently reuses a socket when the address
family is different, so we have to explicitly check this, from
Marcelo Lietner.
18) Fix missing include in nft_reject_bridge.c breaking the build on ppc
and other architectures, from Guenter Roeck.
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (75 commits)
vxlan: Do not reuse sockets for a different address family
smsc911x: power-up phydev before doing a software reset.
lib: rhashtable - Remove weird non-ASCII characters from comments
net/smsc911x: Fix delays in the PHY enable/disable routines
net/smsc911x: Fix rare soft reset timeout issue due to PHY power-down mode
netlink: Properly unbind in error conditions.
net: ptp: fix time stamp matching logic for VLAN packets.
cxgb4 : dcb open-lldp interop fixes
selftests/net: psock_fanout seg faults in sock_fanout_read_ring()
net: bcmgenet: apply MII configuration in bcmgenet_open()
net: bcmgenet: connect and disconnect from the PHY state machine
net: qualcomm: Fix dependency
ixgbe: phy: fix uninitialized status in ixgbe_setup_phy_link_tnx
net: phy: Correctly handle MII ioctl which changes autonegotiation.
ipv6: fix IPV6_PKTINFO with v4 mapped
net: sctp: fix memory leak in auth key management
net: sctp: fix NULL pointer dereference in af->from_addr_param on malformed packet
net: ppp: Don't call bpf_prog_create() in ppp_lock
net/mlx4_en: Advertize encapsulation offloads features only when VXLAN tunnel is set
cxgb4 : Fix bug in DCB app deletion
...
|
|
The while loop in sock_fanout_read_ring() checks mmap region
bounds after access, causing it to segfault. Fix it to check
count before accessing header->tp_status. This problem can be
reproduced consistently when the test in run as follows:
make -C tools/testing/selftests TARGETS=net run_tests
or
make run_tests from tools/testing/selftests
or
make run_test from tools/testing/selftests/net
Signed-off-by: Shuah Khan <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
The libtraceevent library's main handle 'struct pevent' holds pointers
of every event that was added to it via functions:
pevent_parse_format
pevent_parse_event
We can't release struct event_format (call pevent_free_format)
separately, because that breaks that pointers array mentioned above and
another add_event call could end up with segfault.
All added events are released within the handle cleanup in pevent_free.
Signed-off-by: Jiri Olsa <[email protected]>
Cc: Corey Ashford <[email protected]>
Cc: David Ahern <[email protected]>
Cc: Frederic Weisbecker <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Paul Mackerras <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Steven Rostedt <[email protected]>
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
We don't need to maintain cache of 'struct event_format' objects.
Currently the 'struct perf_evsel' holds this reference already.
Adding events_defined bitmap to keep track of defined events, which is
much cheaper than array of pointers.
Signed-off-by: Jiri Olsa <[email protected]>
Acked-by: Namhyung Kim <[email protected]>
Cc: Adrian Hunter <[email protected]>
Cc: David Ahern <[email protected]>
Cc: Frederic Weisbecker <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Paul Mackerras <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
We don't need to maintain cache of 'struct event_format' objects.
Currently the 'struct perf_evsel' holds this reference already.
Adding events_defined bitmap to keep track of defined events, which is
much cheaper than array of pointers.
Signed-off-by: Jiri Olsa <[email protected]>
Acked-by: Namhyung Kim <[email protected]>
Cc: Adrian Hunter <[email protected]>
Cc: David Ahern <[email protected]>
Cc: Frederic Weisbecker <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Paul Mackerras <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
Set a bit and return its old value. Stolen from kernel sources, will be
used in next patches.
Signed-off-by: Jiri Olsa <[email protected]>
Acked-by: Namhyung Kim <[email protected]>
Cc: Adrian Hunter <[email protected]>
Cc: David Ahern <[email protected]>
Cc: Frederic Weisbecker <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Paul Mackerras <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
The previous patch changed kernel dso name from '[kernel.kallsyms]' to
vmlinux. However it might add confusion to old users accustomed to the
old name. So change the short name to '[kernel.vmlinux]' to reduce such
confusion.
Before:
# Overhead Command Shared Object Symbol
# ........ .............. ....................... ...............................
#
9.83% swapper vmlinux [k] intel_idle
4.10% awk libc-2.20.so [.] __strcmp_sse2
1.86% sed libc-2.20.so [.] __strcmp_sse2
1.78% netctl-auto libc-2.20.so [.] __strcmp_sse2
1.23% netctl-auto libc-2.20.so [.] __mbrtowc
1.21% firefox libxul.so [.] 0x00000000024b62bd
1.20% swapper vmlinux [k] cpuidle_enter_state
1.03% sleep vmlinux [k] copy_user_generic_unrolled
After:
# Overhead Command Shared Object Symbol
# ........ .............. ....................... ...............................
#
9.83% swapper [kernel.vmlinux] [k] intel_idle
4.10% awk libc-2.20.so [.] __strcmp_sse2
1.86% sed libc-2.20.so [.] __strcmp_sse2
1.78% netctl-auto libc-2.20.so [.] __strcmp_sse2
1.23% netctl-auto libc-2.20.so [.] __mbrtowc
1.21% firefox libxul.so [.] 0x00000000024b62bd
1.20% swapper [kernel.vmlinux] [k] cpuidle_enter_state
1.03% sleep [kernel.vmlinux] [k] copy_user_generic_unrolled
Signed-off-by: Namhyung Kim <[email protected]>
Cc: Adrian Hunter <[email protected]>
Cc: David Ahern <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Paul Mackerras <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Stephane Eranian <[email protected]>
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
There's a problem on finding correct kernel symbols when perf report
runs on a different kernel. Although a part of the problem was solved
by the prior commit 0a7e6d1b6844 ("perf tools: Check recorded kernel
version when finding vmlinux"), there's a remaining problem still.
When perf records samples, it synthesizes the kernel map using
machine__mmap_name() and ref_reloc_sym like "[kernel.kallsyms]_text".
You can easily see it using 'perf report -D' command.
After finishing record, it goes through the recorded events to find
maps/dsos actually used. And then record build-id info of them.
During this process, it needs to load symbols in a dso and it'd call
dso__load_vmlinux_path() since the default value of the symbol_conf.
try_vmlinux_path is true. However it changes dso->long_name to a real
path of the vmlinux file (e.g. /lib/modules/3.16.4/build/vmlinux) if one
is running on a custom kernel.
It resulted in that perf report reads the build-id of the vmlinux, but
cannot use it since it only knows about the [kernel.kallsyms] map. It
then falls back to possible vmlinux paths by using the recorded kernel
version (in case of a recent version) or a running kernel silently.
Even with the recent tools, this still has a possibility of breaking
the result. As the build directory is a symbolic link, if one built a
new kernel in the same directory with different source/config, the old
link to vmlinux will point the new file. So it's absolutely needed to
use build-id when finding a kernel image.
In this patch, it's now changed to try to search a kernel dso in the
existing dso list which was constructed during build-id table parsing
so it'll always have a build-id. If not found, search "[kernel.kallsyms]".
Before:
$ perf report
# Children Self Command Shared Object Symbol
# ........ ........ ....... ................. ...............................
#
72.15% 0.00% swapper [kernel.kallsyms] [k] set_curr_task_rt
72.15% 0.00% swapper [kernel.kallsyms] [k] native_calibrate_tsc
72.15% 0.00% swapper [kernel.kallsyms] [k] tsc_refine_calibration_work
71.87% 71.87% swapper [kernel.kallsyms] [k] module_finalize
...
After (for the same perf.data):
72.15% 0.00% swapper vmlinux [k] cpu_startup_entry
72.15% 0.00% swapper vmlinux [k] arch_cpu_idle
72.15% 0.00% swapper vmlinux [k] default_idle
71.87% 71.87% swapper vmlinux [k] native_safe_halt
...
Signed-off-by: Namhyung Kim <[email protected]>
Acked-by: Ingo Molnar <[email protected]>
Link: http://lkml.kernel.org/r/[email protected]
Cc: Adrian Hunter <[email protected]>
Cc: David Ahern <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Paul Mackerras <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Stephane Eranian <[email protected]>
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
When perf record finishes a session, it pre-processes samples in order
to write build-id info from DSOs that had samples.
During this process it'll call map__load() for the kernel map, and it
ends up calling dso__load_vmlinux_path() which replaces dso->long_name.
But this function checks kernel's build-id before searching vmlinux path
so it'll end up with a cryptic name, the pathname for the entry in the
~/.debug cache, which can be confusing to users.
This patch adds a flag to skip the build-id check during record, so
that it'll have the original vmlinux path for the kernel dso->long_name,
not the entry in the ~/.debug cache.
Before:
# perf record -va sleep 3
mmap size 528384B
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.196 MB perf.data (~8545 samples) ]
Looking at the vmlinux_path (7 entries long)
Using /home/namhyung/.debug/.build-id/f0/6e17aa50adf4d00b88925e03775de107611551 for symbols
After:
# perf record -va sleep 3
mmap size 528384B
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.193 MB perf.data (~8432 samples) ]
Looking at the vmlinux_path (7 entries long)
Using /lib/modules/3.16.4-1-ARCH/build/vmlinux for symbols
Signed-off-by: Namhyung Kim <[email protected]>
Cc: Adrian Hunter <[email protected]>
Cc: David Ahern <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Paul Mackerras <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Stephane Eranian <[email protected]>
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
It'd be better managing those functions in a separate place as
util/header.c file is already big.
It now exports following 3 functions to others:
bool perf_session__read_build_ids(struct perf_session *session, bool with_hits);
int perf_session__write_buildid_table(struct perf_session *session, int fd);
int perf_session__cache_build_ids(struct perf_session *session);
Signed-off-by: Namhyung Kim <[email protected]>
Acked-by: Adrian Hunter <[email protected]>
Link: http://lkml.kernel.org/r/[email protected]
Cc: Adrian Hunter <[email protected]>
Cc: David Ahern <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Paul Mackerras <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Stephane Eranian <[email protected]>
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
The dsos__write_buildid_table() is not use struct dso and it mostly
uses perf_session struct.
So rename it to perf_session__write_buildid_ table() so that it
corresponds to other related functions such as
perf_session__read_build_ids() and perf_session__cache_build_ids().
Signed-off-by: Namhyung Kim <[email protected]>
Cc: Adrian Hunter <[email protected]>
Cc: David Ahern <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Paul Mackerras <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Stephane Eranian <[email protected]>
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
Now my Archlinux box shows module symbols correctly.
Before:
$ perf report --stdio
Failed to open /tmp/perf-3477.map, continuing without symbols
no symbols found in /usr/bin/date, maybe install a debug package?
No kallsyms or vmlinux with build-id 7b4ea0a49ae2111925857099aaf05c3246ff33e0 was found
[drm] with build id 7b4ea0a49ae2111925857099aaf05c3246ff33e0 not found, continuing without symbols
No kallsyms or vmlinux with build-id edd931629094b660ca9dec09a1b635c8d87aa2ee was found
[jbd2] with build id edd931629094b660ca9dec09a1b635c8d87aa2ee not found, continuing without symbols
No kallsyms or vmlinux with build-id a7b1eada671c34933e5610bb920b2ca4945a82c3 was found
[ext4] with build id a7b1eada671c34933e5610bb920b2ca4945a82c3 not found, continuing without symbols
No kallsyms or vmlinux with build-id d69511fa3e5840e770336ef45b06c83fef8d74e3 was found
[scsi_mod] with build id d69511fa3e5840e770336ef45b06c83fef8d74e3 not found, continuing without symbols
No kallsyms or vmlinux with build-id af0430af13461af058770ee9b87afc07922c2e77 was found
[libata] with build id af0430af13461af058770ee9b87afc07922c2e77 not found, continuing without symbols
No kallsyms or vmlinux with build-id aaeedff8160ce631a5f0333591c6ff291201d29f was found
[libahci] with build id aaeedff8160ce631a5f0333591c6ff291201d29f not found, continuing without symbols
No kallsyms or vmlinux with build-id c57907712becaf662dc4981824bb372c0441d605 was found
[mac80211] with build id c57907712becaf662dc4981824bb372c0441d605 not found, continuing without symbols
No kallsyms or vmlinux with build-id e0589077cc0ec8c3e4c40eb9f2d9e69d236bee8f was found
[iwldvm] with build id e0589077cc0ec8c3e4c40eb9f2d9e69d236bee8f not found, continuing without symbols
No kallsyms or vmlinux with build-id 2d86086bf136bf374a2f029cf85a48194f9b950b was found
[cfg80211] with build id 2d86086bf136bf374a2f029cf85a48194f9b950b not found, continuing without symbols
No kallsyms or vmlinux with build-id 4493c48599bdb3d91d0f8db5150e0be33fdd9221 was found
[iwlwifi] with build id 4493c48599bdb3d91d0f8db5150e0be33fdd9221 not found, continuing without symbols
...
#
# Overhead Command Shared Object Symbol
# ........ ............... ....................... ........................................................
#
0.03% swapper [ext4] [k] 0x000000000000fe2e
0.03% swapper [kernel.kallsyms] [k] account_entity_enqueue
0.03% swapper [ext4] [k] 0x000000000000fc2b
0.03% irq/50-iwlwifi [iwlwifi] [k] 0x000000000000200b
0.03% swapper [kernel.kallsyms] [k] ktime_add_safe
0.03% swapper [kernel.kallsyms] [k] elv_completed_request
0.03% swapper [libata] [k] 0x0000000000003997
0.03% swapper [libahci] [k] 0x0000000000001f25
0.03% swapper [kernel.kallsyms] [k] rb_next
0.03% swapper [kernel.kallsyms] [k] blk_finish_request
0.03% swapper [ext4] [k] 0x0000000000010248
0.00% perf [kernel.kallsyms] [k] native_write_msr_safe
After:
$ perf report --stdio
Failed to open /tmp/perf-3477.map, continuing without symbols
no symbols found in /usr/bin/tr, maybe install a debug package?
...
#
# Overhead Command Shared Object Symbol
# ........ ............... ........................... ......................................................
#
0.04% kworker/u16:3 [ext4] [k] ext4_read_block_bitmap
0.03% kworker/u16:0 [mac80211] [k] ieee80211_sta_reset_beacon_monitor
0.02% irq/50-iwlwifi [mac80211] [k] ieee80211_get_bssid
0.02% firefox [e1000e] [k] __ew32_prepare
0.02% swapper [libahci] [k] ahci_handle_port_interrupt
0.02% emacs libglib-2.0.so.0.4000.0 [.] g_mutex_unlock
0.02% swapper [e1000e] [k] e1000_clean_tx_irq
0.02% dwm [kernel.kallsyms] [k] __schedule
0.02% gnome-terminal- [vdso] [.] __vdso_clock_gettime
0.02% swapper [e1000e] [k] e1000_alloc_rx_buffers
0.02% irq/50-iwlwifi [mac80211] [k] ieee80211_rx
0.01% firefox [vdso] [.] __vdso_gettimeofday
0.01% irq/50-iwlwifi [iwlwifi] [k] iwl_pcie_rxq_restock.part.13
Signed-off-by: Namhyung Kim <[email protected]>
Acked-by: Jiri Olsa <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: Paul Mackerras <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Adrian Hunter <[email protected]>
Cc: David Ahern <[email protected]>
Cc: Stephane Eranian <[email protected]>
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace
Pull ftracetest fix from Steven Rostedt:
"Running the ftracetests on a machine that had the debugfs file system
mounted in two locations caused the ftracetests to fail. This is
because the ftracetests script does a grep of the /proc/mounts file to
find where the debugfs file system is mounted. If it is mounted
twice, then the grep returns two lines instead of just one. This
causes the ftracetests to get confused and fail.
Use "head -1" to only return the first mount point for debugfs"
* tag 'ftracetest-3.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
ftracetest: Take the first debugfs mount found
|
|
This patch adds basic support to handle compressed kernel module as some
distro (such as Archlinux) carries on it now. The actual work using
compression library will be added later.
Signed-off-by: Namhyung Kim <[email protected]>
Acked-by: Jiri Olsa <[email protected]>
Cc: Adrian Hunter <[email protected]>
Cc: David Ahern <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Paul Mackerras <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Stephane Eranian <[email protected]>
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
Tracing for a workload begins before the comm event is seen, which
results in the initial comm having a string of the form ":<pid>" (e.g.
":12345").
In order to export the correct string, defer the export until the new
script 'flush' callback.
Signed-off-by: Adrian Hunter <[email protected]>
Cc: David Ahern <[email protected]>
Cc: Frederic Weisbecker <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Paul Mackerras <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Stephane Eranian <[email protected]>
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
Add the ability to export detailed information about paired calls and
returns to Python db export and the export-to-postgresql.py script.
Signed-off-by: Adrian Hunter <[email protected]>
Cc: David Ahern <[email protected]>
Cc: Frederic Weisbecker <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Paul Mackerras <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Stephane Eranian <[email protected]>
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
Make it possible for the database export API to use the enhanced thread
stack and export detailed information about paired calls and returns.
Signed-off-by: Adrian Hunter <[email protected]>
Cc: David Ahern <[email protected]>
Cc: Frederic Weisbecker <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Paul Mackerras <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Stephane Eranian <[email protected]>
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
Add branch_type and in_tx to Python db export and the
export-to-postgresql.py script.
Signed-off-by: Adrian Hunter <[email protected]>
Cc: David Ahern <[email protected]>
Cc: Frederic Weisbecker <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Paul Mackerras <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Stephane Eranian <[email protected]>
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
Add the ability to export branch types through the database export
facility.
Signed-off-by: Adrian Hunter <[email protected]>
Cc: David Ahern <[email protected]>
Cc: Frederic Weisbecker <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Paul Mackerras <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Stephane Eranian <[email protected]>
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
Enhance the thread stack to output detailed information about paired
calls and returns.
The enhanced processing consumes sample information via
thread_stack__process() and outputs information about paired calls /
returns via a call-back.
While the call-back makes it possible for the facility to be used by
arbitrary tools, a subsequent patch will provide the information to
Python scripting via the db-export interface.
An important part of the call/return information is the
call path which provides a structure that defines a context
sensitive call graph.
Note that there are now two ways to use the thread stack.
For simply providing a call stack (like you would get from the perf
record -g option) the interface consists of thread_stack__event() and
thread_stack__sample().
Whereas the enhanced interface consists of call_return_processor__new()
and thread_stack__process().
Signed-off-by: Adrian Hunter <[email protected]>
Acked-by: Jiri Olsa <[email protected]>
Cc: David Ahern <[email protected]>
Cc: Frederic Weisbecker <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Paul Mackerras <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Stephane Eranian <[email protected]>
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
Add a thread stack for synthesizing call chains from call and return
events.
Signed-off-by: Adrian Hunter <[email protected]>
Acked-by: Jiri Olsa <[email protected]>
Cc: David Ahern <[email protected]>
Cc: Frederic Weisbecker <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Paul Mackerras <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Stephane Eranian <[email protected]>
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
Running ftracetests on a box that mounted debugfs in two locations
made the ftracetests fail. This is because the tests uses a grep
of debugfs from the /proc/mounts file to find the debugfs mount
point, and then appends "/tracing" to that string to get the tracing
directory.
If the debugfs directory is mounted twice, then that grep will return
two answers and appending "/tracing" to a string with two lines will
not work.
Use "head -1" to only take the first mount point found.
Acked-by: Masami Hiramatsu <[email protected]>
Signed-off-by: Steven Rostedt <[email protected]>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull perf fixes from Ingo Molnar:
"Mostly tooling fixes, plus on the kernel side:
- a revert for a newly introduced PMU driver which isn't complete yet
and where we ran out of time with fixes (to be tried again in
v3.19) - this makes up for a large chunk of the diffstat.
- compilation warning fixes
- a printk message fix
- event_idx usage fixes/cleanups"
* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
perf probe: Trivial typo fix for --demangle
perf tools: Fix report -F dso_from for data without branch info
perf tools: Fix report -F dso_to for data without branch info
perf tools: Fix report -F symbol_from for data without branch info
perf tools: Fix report -F symbol_to for data without branch info
perf tools: Fix report -F mispredict for data without branch info
perf tools: Fix report -F in_tx for data without branch info
perf tools: Fix report -F abort for data without branch info
perf tools: Make CPUINFO_PROC an array to support different kernel versions
perf callchain: Use global caching provided by libunwind
perf/x86/intel: Revert incomplete and undocumented Broadwell client support
perf/x86: Fix compile warnings for intel_uncore
perf: Fix typos in sample code in the perf_event.h header
perf: Fix and clean up initialization of pmu::event_idx
perf: Fix bogus kernel printk
perf diff: Add missing hists__init() call at tool start
|
|
Add a function to deliver synthesized events from within a session.
Intel PT decoding works by synthesizing events (primarily branch events)
that can then be consumed by existing tools. This function will be used
to deliver those events.
Signed-off-by: Adrian Hunter <[email protected]>
Cc: David Ahern <[email protected]>
Cc: Frederic Weisbecker <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Paul Mackerras <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Stephane Eranian <[email protected]>
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
Where direct use of the longer form using list_for_entry() was being
used.
Cc: Adrian Hunter <[email protected]>
Cc: Borislav Petkov <[email protected]>
Cc: David Ahern <[email protected]>
Cc: Don Zickus <[email protected]>
Cc: Frederic Weisbecker <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Mike Galbraith <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Paul Mackerras <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Stephane Eranian <[email protected]>
Link: http://lkml.kernel.org/n/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
Add an index of the event identifiers, in preparation for Intel PT.
The event id (also called the sample id) is a unique number
allocated by the kernel to the event created by perf_event_open(). Events
can include the event id by having a sample type including PERF_SAMPLE_ID or
PERF_SAMPLE_IDENTIFIER.
Currently the main use of the event id is to match an event back to the
evsel to which it belongs i.e. perf_evlist__id2evsel()
The purpose of this patch is to make it possible to match an event back to
the mmap from which it was read. The reason that is useful is because the
mmap represents a time-ordered context (either for a cpu or for a thread).
Intel PT decodes trace information on that basis. In full-trace mode, that
information can be recorded when the Intel PT trace is read, but in
sample-mode the Intel PT trace data is embedded in a sample and it is in
that case that the "id index" is needed.
So the mmaps are numbered (idx) and the cpu and tid recorded against the id
by perf_evlist__set_sid_idx() which is called by perf_evlist__mmap_per_evsel().
That information is recorded on the perf.data file in the new "id index".
idx, cpu and tid are added to struct perf_sample_id (which is the node of
evlist's hash table to match ids to evsels). The information can be
retrieved using perf_evlist__id2sid(). Note however this all depends on
having a sample type including PERF_SAMPLE_ID or PERF_SAMPLE_IDENTIFIER,
otherwise ids are not recorded.
The "id index" is a synthesized event record which will be created when
Intel PT sampling is used by calling perf_event__synthesize_id_index().
Signed-off-by: Adrian Hunter <[email protected]>
Acked-by: Jiri Olsa <[email protected]>
Cc: David Ahern <[email protected]>
Cc: Frederic Weisbecker <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Paul Mackerras <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Stephane Eranian <[email protected]>
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
Add --quiet(-q) option to suppress output result message for --add, and
--del options (Note that --lines/funcs/vars are not affected). This
option is useful if you run the perf probe inside your scripts.
Signed-off-by: Masami Hiramatsu <[email protected]>
Cc: Hemant Kumar <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Srikar Dronamraju <[email protected]>
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|