| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Daniel Borkmann says:
====================
bpf-next 2021-08-31
We've added 116 non-merge commits during the last 17 day(s) which contain
a total of 126 files changed, 6813 insertions(+), 4027 deletions(-).
The main changes are:
1) Add opaque bpf_cookie to perf link which the program can read out again,
to be used in libbpf-based USDT library, from Andrii Nakryiko.
2) Add bpf_task_pt_regs() helper to access userspace pt_regs, from Daniel Xu.
3) Add support for UNIX stream type sockets for BPF sockmap, from Jiang Wang.
4) Allow BPF TCP congestion control progs to call bpf_setsockopt() e.g. to switch
to another congestion control algorithm during init, from Martin KaFai Lau.
5) Extend BPF iterator support for UNIX domain sockets, from Kuniyuki Iwashima.
6) Allow bpf_{set,get}sockopt() calls from setsockopt progs, from Prankur Gupta.
7) Add bpf_get_netns_cookie() helper for BPF_PROG_TYPE_{SOCK_OPS,CGROUP_SOCKOPT}
progs, from Xu Liu and Stanislav Fomichev.
8) Support for __weak typed ksyms in libbpf, from Hao Luo.
9) Shrink struct cgroup_bpf by 504 bytes through refactoring, from Dave Marchevsky.
10) Fix a smatch complaint in verifier's narrow load handling, from Andrey Ignatov.
11) Fix BPF interpreter's tail call count limit, from Daniel Borkmann.
12) Big batch of improvements to BPF selftests, from Magnus Karlsson, Li Zhijian,
Yucong Sun, Yonghong Song, Ilya Leoshkevich, Jussi Maki, Ilya Leoshkevich, others.
13) Another big batch to revamp XDP samples in order to give them consistent look
and feel, from Kumar Kartikeya Dwivedi.
* https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: (116 commits)
MAINTAINERS: Remove self from powerpc BPF JIT
selftests/bpf: Fix potential unreleased lock
samples: bpf: Fix uninitialized variable in xdp_redirect_cpu
selftests/bpf: Reduce more flakyness in sockmap_listen
bpf: Fix bpf-next builds without CONFIG_BPF_EVENTS
bpf: selftests: Add dctcp fallback test
bpf: selftests: Add connect_to_fd_opts to network_helpers
bpf: selftests: Add sk_state to bpf_tcp_helpers.h
bpf: tcp: Allow bpf-tcp-cc to call bpf_(get|set)sockopt
selftests: xsk: Preface options with opt
selftests: xsk: Make enums lower case
selftests: xsk: Generate packets from specification
selftests: xsk: Generate packet directly in umem
selftests: xsk: Simplify cleanup of ifobjects
selftests: xsk: Decrease sending speed
selftests: xsk: Validate tx stats on tx thread
selftests: xsk: Simplify packet validation in xsk tests
selftests: xsk: Rename worker_* functions that are not thread entry points
selftests: xsk: Disassociate umem size with packets sent
selftests: xsk: Remove end-of-test packet
...
====================
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
The kernel provides a "/proc/sys/net/ipv6/conf/<iface>/mtu"
file, which can temporarily record the mtu value of the last
received RA message when the RA mtu value is lower than the
interface mtu, but this proc has following limitations:
(1) when the interface mtu (/sys/class/net/<iface>/mtu) is
updeated, mtu6 (/proc/sys/net/ipv6/conf/<iface>/mtu) will
be updated to the value of interface mtu;
(2) mtu6 (/proc/sys/net/ipv6/conf/<iface>/mtu) only affect
ipv6 connection, and not affect ipv4.
Therefore, when the mtu option is carried in the RA message,
there will be a problem that the user sometimes cannot obtain
RA mtu value correctly by reading mtu6.
After this patch set, if a RA message carries the mtu option,
you can send a netlink msg which nlmsg_type is RTM_GETLINK,
and then by parsing the attribute of IFLA_INET6_RA_MTU to
get the mtu value carried in the RA message received on the
inet6 device. In addition, you can also get a link notification
when ra_mtu is updated so it doesn't have to poll.
In this way, if the MTU values that the device receives from
the network in the PCO IPv4 and the RA IPv6 procedures are
different, the user can obtain the correct ipv6 ra_mtu value
and compare the value of ra_mtu and ipv4 mtu, then the device
can use the lower MTU value for both IPv4 and IPv6.
Signed-off-by: Rocco Yue <[email protected]>
Reviewed-by: David Ahern <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
This lock is not released if the program
return at the patched branch.
Signed-off-by: Chengfeng Ye <[email protected]>
Signed-off-by: Alexei Starovoitov <[email protected]>
Link: https://lore.kernel.org/bpf/[email protected]
|
|
This patch adds similar retry logic to more places where read() is used, to
reduce flakyness in slow CI environment.
Signed-off-by: Yucong Sun <[email protected]>
Signed-off-by: Alexei Starovoitov <[email protected]>
Link: https://lore.kernel.org/bpf/[email protected]
|
|
This change extends the existing GRO coalesce test to
allow running on top of a veth pair, so that no H/W dep
is required to run them.
By default gro.sh will use the veth backend, and will try
to use exiting H/W in loopback mode if a specific device
name is provided with the '-i' command line option.
No functional change is intended for the loopback-based
tests, just move all the relevant initialization/cleanup
code into the related script.
Introduces a new initialization helper script for the
veth backend, and plugs the correct helper script according
to the provided command line.
Additionally, enable veth-based tests by default.
v1 -> v2:
- drop unused code in setup_veth_ns() - Willem
Signed-off-by: Paolo Abeni <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
This patch makes the bpf_dctcp test to fallback to cubic by
using setsockopt(TCP_CONGESTION) when the tcp flow is not
ecn ready.
It also checks setsockopt() is not available to release().
The settimeo() from the network_helpers.h is used, so the local
one is removed.
Signed-off-by: Martin KaFai Lau <[email protected]>
Signed-off-by: Alexei Starovoitov <[email protected]>
Link: https://lore.kernel.org/bpf/[email protected]
|
|
The next test requires to setsockopt(TCP_CONGESTION) before
connect(), so a new arg is needed for the connect_to_fd() to specify
the cc's name.
This patch adds a new "struct network_helper_opts" for the future
option needs. It starts with the "cc" and "timeout_ms" option.
A new helper connect_to_fd_opts() is added to take the new
"const struct network_helper_opts *opts" as an arg.
Signed-off-by: Martin KaFai Lau <[email protected]>
Signed-off-by: Alexei Starovoitov <[email protected]>
Link: https://lore.kernel.org/bpf/[email protected]
|
|
Add sk_state define to bpf_tcp_helpers.h. Rename the existing
global variable "sk_state" in the kfunc_call test to "sk_state_res".
Signed-off-by: Martin KaFai Lau <[email protected]>
Signed-off-by: Alexei Starovoitov <[email protected]>
Link: https://lore.kernel.org/bpf/[email protected]
|
|
Preface all options with opt_ and make them booleans.
Signed-off-by: Magnus Karlsson <[email protected]>
Signed-off-by: Alexei Starovoitov <[email protected]>
Link: https://lore.kernel.org/bpf/[email protected]
|
|
Make enums lower case as that is the standard. Also drop the
unnecessary TEST_MODE_UNCONFIGURED mode.
Signed-off-by: Magnus Karlsson <[email protected]>
Signed-off-by: Alexei Starovoitov <[email protected]>
Link: https://lore.kernel.org/bpf/[email protected]
|
|
Generate packets from a specification instead of something hard
coded. The idea is that a test generates one or more packet
specifications and provides it/them to both Tx and Rx. The Tx thread
will generate from this specification and Rx will validate that it
receives what is in the specification. The specification can be the
same on both ends, meaning that everything that was sent should be
received, or different which means that Rx will only receive part of
the sent packets.
Currently, the packet specification is the same for both Rx and Tx and
the same for each test. This will change in later work as features
and tests are added.
The data path functions are also renamed to better reflect what
actions they are performing after introducing this feature.
Signed-off-by: Magnus Karlsson <[email protected]>
Signed-off-by: Alexei Starovoitov <[email protected]>
Link: https://lore.kernel.org/bpf/[email protected]
|
|
Generate the packet directly in the umem instead of in a temporary
buffer that is copied out. Simplifies the code and improves
performance.
Signed-off-by: Magnus Karlsson <[email protected]>
Signed-off-by: Alexei Starovoitov <[email protected]>
Link: https://lore.kernel.org/bpf/[email protected]
|
|
Simpify the cleanup of ifobjects right before the program exits by
introducing functions for creating and destroying these objects.
Signed-off-by: Magnus Karlsson <[email protected]>
Signed-off-by: Alexei Starovoitov <[email protected]>
Link: https://lore.kernel.org/bpf/[email protected]
|
|
Decrease sending speed to avoid potentially overflowing some buffers
in the skb case that leads to dropped packets we cannot control (and
thus the tests may generate false negatives). Decrease batch size and
introduce a usleep in the transmit thread to not overflow the
receiver.
Signed-off-by: Magnus Karlsson <[email protected]>
Signed-off-by: Alexei Starovoitov <[email protected]>
Link: https://lore.kernel.org/bpf/[email protected]
|
|
Validate the tx stats on the Tx thread instead of the Rx
thread. Depending on your settings, you might not be allowed to query
the statistics of a socket you do not own, so better to do this on the
correct thread to start with.
Signed-off-by: Magnus Karlsson <[email protected]>
Signed-off-by: Alexei Starovoitov <[email protected]>
Link: https://lore.kernel.org/bpf/[email protected]
|
|
Simplify packet validation in the xsk selftests by performing it at
once for every packet. The current code performed this per batch and
did this on copied packet data. Make it simpler and faster by
validating it at once and on the umem packet data thus skipping the
copy and the memory allocation for the temprary buffer.
The optional packet dump feature is also simplified in the same
manner. Memory allocation and copying is removed and the dump is
performed directly on the umem data.
Signed-off-by: Magnus Karlsson <[email protected]>
Signed-off-by: Alexei Starovoitov <[email protected]>
Link: https://lore.kernel.org/bpf/[email protected]
|
|
Rename worker_* functions that are not thread entry points to
something else. This was confusing. Now only thread entry points are
worker_something.
Signed-off-by: Magnus Karlsson <[email protected]>
Signed-off-by: Alexei Starovoitov <[email protected]>
Link: https://lore.kernel.org/bpf/[email protected]
|
|
Disassociate the number of packets sent with the number of buffers in
the umem. This so we can loop over the umem to test more things. Set
the size of the umem to be a multiple of 2M. A requirement for huge
pages that are needed in unaligned mode.
Signed-off-by: Magnus Karlsson <[email protected]>
Signed-off-by: Alexei Starovoitov <[email protected]>
Link: https://lore.kernel.org/bpf/[email protected]
|
|
Get rid of the end-of-test packet and just count the number of packets
received and quit when the expected number as been
received. Simplifies the code.
Signed-off-by: Magnus Karlsson <[email protected]>
Signed-off-by: Alexei Starovoitov <[email protected]>
Link: https://lore.kernel.org/bpf/[email protected]
|
|
Simplify the retry code and make it more efficient by waiting first,
instead of trying immediately which always fails due to the
asynchronous nature of xsk socket close. Also decrease the wait time
to significantly lower the run-time of the test suite.
Signed-off-by: Magnus Karlsson <[email protected]>
Signed-off-by: Alexei Starovoitov <[email protected]>
Link: https://lore.kernel.org/bpf/[email protected]
|
|
Return the correct error codes so they can be printed correctly.
Signed-off-by: Magnus Karlsson <[email protected]>
Signed-off-by: Alexei Starovoitov <[email protected]>
Link: https://lore.kernel.org/bpf/[email protected]
|
|
Remove unused variables and typedefs. The *_npkts variables are
incremented but never used.
Signed-off-by: Magnus Karlsson <[email protected]>
Signed-off-by: Alexei Starovoitov <[email protected]>
Link: https://lore.kernel.org/bpf/[email protected]
|
|
Remove the number of tx packet option as this should be decided by the
test itself. Also change the number of packets to be sent to 4096
speeding up the execution.
Signed-off-by: Magnus Karlsson <[email protected]>
Signed-off-by: Alexei Starovoitov <[email protected]>
Link: https://lore.kernel.org/bpf/[email protected]
|
|
Remove color mode since it does not add any value and having less code
means less maintenance which is a good thing.
Signed-off-by: Magnus Karlsson <[email protected]>
Signed-off-by: Alexei Starovoitov <[email protected]>
Link: https://lore.kernel.org/bpf/[email protected]
|
|
This test retrieves the uprobe's pt_regs in two different ways and
compares the contents in an arch-agnostic way.
Signed-off-by: Daniel Xu <[email protected]>
Signed-off-by: Alexei Starovoitov <[email protected]>
Link: https://lore.kernel.org/bpf/5581eb8800f6625ec8813fe21e9dce1fbdef4937.1629772842.git.dxu@dxuuu.xyz
|
|
The motivation behind this helper is to access userspace pt_regs in a
kprobe handler.
uprobe's ctx is the userspace pt_regs. kprobe's ctx is the kernelspace
pt_regs. bpf_task_pt_regs() allows accessing userspace pt_regs in a
kprobe handler. The final case (kernelspace pt_regs in uprobe) is
pretty rare (usermode helper) so I think that can be solved later if
necessary.
More concretely, this helper is useful in doing BPF-based DWARF stack
unwinding. Currently the kernel can only do framepointer based stack
unwinds for userspace code. This is because the DWARF state machines are
too fragile to be computed in kernelspace [0]. The idea behind
DWARF-based stack unwinds w/ BPF is to copy a chunk of the userspace
stack (while in prog context) and send it up to userspace for unwinding
(probably with libunwind) [1]. This would effectively enable profiling
applications with -fomit-frame-pointer using kprobes and uprobes.
[0]: https://lkml.org/lkml/2012/2/10/356
[1]: https://github.com/danobi/bpf-dwarf-walk
Signed-off-by: Daniel Xu <[email protected]>
Signed-off-by: Alexei Starovoitov <[email protected]>
Link: https://lore.kernel.org/bpf/e2718ced2d51ef4268590ab8562962438ab82815.1629772842.git.dxu@dxuuu.xyz
|
|
This patch added a function chk_fail_nr to check the mibs for MP_FAIL.
Signed-off-by: Geliang Tang <[email protected]>
Signed-off-by: Mat Martineau <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
There are several test cases in the net directory are still using
exit 0 or exit 1 when they need to be skipped. Use kselftest
framework skip code instead so it can help us to distinguish the
return status.
Criterion to filter out what should be fixed in net directory:
grep -r "exit [01]" -B1 | grep -i skip
This change might cause some false-positives if people are running
these test scripts directly and only checking their return codes,
which will change from 0 to 4. However I think the impact should be
small as most of our scripts here are already using this skip code.
And there will be no such issue if running them with the kselftest
framework.
Signed-off-by: Po-Hsu Lin <[email protected]>
Reviewed-by: Ido Schimmel <[email protected]>
Tested-by: Ido Schimmel <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
Instead of copying the whole header in, just add the struct definitions
we need for now. In the future it can be synced as a copy of in-tree
header if required.
Signed-off-by: Kumar Kartikeya Dwivedi <[email protected]>
Signed-off-by: Alexei Starovoitov <[email protected]>
Link: https://lore.kernel.org/bpf/[email protected]
|
|
Add test to use get_netns_cookie() from BPF_PROG_TYPE_SK_MSG.
Signed-off-by: Xu Liu <[email protected]>
Signed-off-by: Alexei Starovoitov <[email protected]>
Link: https://lore.kernel.org/bpf/[email protected]
|
|
This would happend when we run the tests after install kselftests
root@lkp-skl-d01 ~# /kselftests/run_kselftest.sh -t bpf:test_doc_build.sh
TAP version 13
1..1
# selftests: bpf: test_doc_build.sh
perl: warning: Setting locale failed.
perl: warning: Please check that your locale settings:
LANGUAGE = (unset),
LC_ALL = (unset),
LC_ADDRESS = "en_US.UTF-8",
LC_NAME = "en_US.UTF-8",
LC_MONETARY = "en_US.UTF-8",
LC_PAPER = "en_US.UTF-8",
LC_IDENTIFICATION = "en_US.UTF-8",
LC_TELEPHONE = "en_US.UTF-8",
LC_MEASUREMENT = "en_US.UTF-8",
LC_TIME = "en_US.UTF-8",
LC_NUMERIC = "en_US.UTF-8",
LANG = "en_US.UTF-8"
are supported and installed on your system.
perl: warning: Falling back to the standard locale ("C").
# skip: bpftool files not found!
#
ok 1 selftests: bpf: test_doc_build.sh # SKIP
Signed-off-by: Li Zhijian <[email protected]>
Signed-off-by: Alexei Starovoitov <[email protected]>
Link: https://lore.kernel.org/bpf/[email protected]
|
|
test_bpftool.sh relies on bpftool and test_bpftool.py.
'make install' will install bpftool to INSTALL_PATH/bpf/bpftool, and
export it to PATH so that it can be used after installing.
Signed-off-by: Li Zhijian <[email protected]>
Signed-off-by: Alexei Starovoitov <[email protected]>
Link: https://lore.kernel.org/bpf/[email protected]
|
|
For 'make run_tests':
selftests will build bpftool into tools/testing/selftests/bpf/tools/sbin/bpftool
by default.
==================
root@lkp-skl-d01 /opt/rootfs/v5.14-rc4# make -C tools/testing/selftests/bpf run_tests
make: Entering directory '/opt/rootfs/v5.14-rc4/tools/testing/selftests/bpf'
MKDIR include
MKDIR libbpf
MKDIR bpftool
[...]
GEN /opt/rootfs/v5.14-rc4/tools/testing/selftests/bpf/tools/build/bpftool/profiler.skel.h
CC /opt/rootfs/v5.14-rc4/tools/testing/selftests/bpf/tools/build/bpftool/prog.o
GEN /opt/rootfs/v5.14-rc4/tools/testing/selftests/bpf/tools/build/bpftool/pid_iter.skel.h
CC /opt/rootfs/v5.14-rc4/tools/testing/selftests/bpf/tools/build/bpftool/pids.o
LINK /opt/rootfs/v5.14-rc4/tools/testing/selftests/bpf/tools/build/bpftool/bpftool
INSTALL bpftool
GEN vmlinux.h
[...]
# test_feature_dev_json (test_bpftool.TestBpftool) ... ERROR
# test_feature_kernel (test_bpftool.TestBpftool) ... ERROR
# test_feature_kernel_full (test_bpftool.TestBpftool) ... ERROR
# test_feature_kernel_full_vs_not_full (test_bpftool.TestBpftool) ... ERROR
# test_feature_macros (test_bpftool.TestBpftool) ... Error: bug: failed to retrieve CAP_BPF status: Invalid argument
# ERROR
#
# ======================================================================
# ERROR: test_feature_dev_json (test_bpftool.TestBpftool)
# ----------------------------------------------------------------------
# Traceback (most recent call last):
# File "/opt/rootfs/v5.14-rc4/tools/testing/selftests/bpf/test_bpftool.py", line 57, in wrapper
# return f(*args, iface, **kwargs)
# File "/opt/rootfs/v5.14-rc4/tools/testing/selftests/bpf/test_bpftool.py", line 82, in test_feature_dev_json
# res = bpftool_json(["feature", "probe", "dev", iface])
# File "/opt/rootfs/v5.14-rc4/tools/testing/selftests/bpf/test_bpftool.py", line 42, in bpftool_json
# res = _bpftool(args)
# File "/opt/rootfs/v5.14-rc4/tools/testing/selftests/bpf/test_bpftool.py", line 34, in _bpftool
# return subprocess.check_output(_args)
# File "/usr/lib/python3.7/subprocess.py", line 395, in check_output
# **kwargs).stdout
# File "/usr/lib/python3.7/subprocess.py", line 487, in run
# output=stdout, stderr=stderr)
# subprocess.CalledProcessError: Command '['bpftool', '-j', 'feature', 'probe', 'dev', 'dummy0']' returned non-zero exit status 255.
#
==================
Signed-off-by: Li Zhijian <[email protected]>
Signed-off-by: Alexei Starovoitov <[email protected]>
Acked-by: Song Liu <[email protected]>
Link: https://lore.kernel.org/bpf/[email protected]
|
|
Previously, it fails as below:
-------------
root@lkp-skl-d01 /opt/rootfs/v5.14-rc4/tools/testing/selftests/bpf# ./test_doc_build.sh
++ realpath --relative-to=/opt/rootfs/v5.14-rc4/tools/testing/selftests/bpf ./test_doc_build.sh
+ SCRIPT_REL_PATH=test_doc_build.sh
++ dirname test_doc_build.sh
+ SCRIPT_REL_DIR=.
++ realpath /opt/rootfs/v5.14-rc4/tools/testing/selftests/bpf/./../../../../
+ KDIR_ROOT_DIR=/opt/rootfs/v5.14-rc4
+ cd /opt/rootfs/v5.14-rc4
+ for tgt in docs docs-clean
+ make -s -C /opt/rootfs/v5.14-rc4/. docs
make: *** No rule to make target 'docs'. Stop.
+ for tgt in docs docs-clean
+ make -s -C /opt/rootfs/v5.14-rc4/. docs-clean
make: *** No rule to make target 'docs-clean'. Stop.
-----------
Reported-by: kernel test robot <[email protected]>
Signed-off-by: Li Zhijian <[email protected]>
Signed-off-by: Alexei Starovoitov <[email protected]>
Acked-by: Song Liu <[email protected]>
Link: https://lore.kernel.org/bpf/[email protected]
|
|
0Day robot observed that it's easily timeout on a heavy load host.
-------------------
# selftests: bpf: test_maps
# Fork 1024 tasks to 'test_update_delete'
# Fork 1024 tasks to 'test_update_delete'
# Fork 100 tasks to 'test_hashmap'
# Fork 100 tasks to 'test_hashmap_percpu'
# Fork 100 tasks to 'test_hashmap_sizes'
# Fork 100 tasks to 'test_hashmap_walk'
# Fork 100 tasks to 'test_arraymap'
# Fork 100 tasks to 'test_arraymap_percpu'
# Failed sockmap unexpected timeout
not ok 3 selftests: bpf: test_maps # exit=1
# selftests: bpf: test_lru_map
# nr_cpus:8
-------------------
Since this test will be scheduled by 0Day to a random host that could have
only a few cpus(2-8), enlarge the timeout to avoid a false NG report.
In practice, i tried to pin it to only one cpu by 'taskset 0x01 ./test_maps',
and knew 10S is likely enough, but i still perfer to a larger value 30.
Reported-by: kernel test robot <[email protected]>
Signed-off-by: Li Zhijian <[email protected]>
Signed-off-by: Alexei Starovoitov <[email protected]>
Acked-by: Song Liu <[email protected]>
Link: https://lore.kernel.org/bpf/[email protected]
|
|
This patch added an extra test for the singal_address_tests() to do the
ADD_ADDR and ADD_ADDR_ECHO race test.
Co-developed-by: Geliang Tang <[email protected]>
Signed-off-by: Geliang Tang <[email protected]>
Signed-off-by: Yonglong Li <[email protected]>
Signed-off-by: Mat Martineau <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
This patch extends wait time in timer_mim. As observed in slow CI environment,
it is possible to have interrupt/preemption long enough to cause the test to
fail, almost 1 failure in 5 runs.
Signed-off-by: Yucong Sun <[email protected]>
Signed-off-by: Alexei Starovoitov <[email protected]>
Link: https://lore.kernel.org/bpf/[email protected]
|
|
Add an enum (cgroup_bpf_attach_type) containing only valid cgroup_bpf
attach types and a function to map bpf_attach_type values to the new
enum. Inspired by netns_bpf_attach_type.
Then, migrate cgroup_bpf to use cgroup_bpf_attach_type wherever
possible. Functionality is unchanged as attach_type_to_prog_type
switches in bpf/syscall.c were preventing non-cgroup programs from
making use of the invalid cgroup_bpf array slots.
As a result struct cgroup_bpf uses 504 fewer bytes relative to when its
arrays were sized using MAX_BPF_ATTACH_TYPE.
bpf_cgroup_storage is notably not migrated as struct
bpf_cgroup_storage_key is part of uapi and contains a bpf_attach_type
member which is not meant to be opaque. Similarly, bpf_cgroup_link
continues to report its bpf_attach_type member to userspace via fdinfo
and bpf_link_info.
To ease disambiguation, bpf_attach_type variables are renamed from
'type' to 'atype' when changed to cgroup_bpf_attach_type.
Signed-off-by: Dave Marchevsky <[email protected]>
Signed-off-by: Alexei Starovoitov <[email protected]>
Link: https://lore.kernel.org/bpf/[email protected]
|
|
This silences the following coccinelle warning:
"WARNING: sum of probable bitmasks, consider |"
Reported-by: Zeal Robot <[email protected]>
Signed-off-by: jing yangyang <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
drivers/ptp/Kconfig:
55c8fca1dae1 ("ptp_pch: Restore dependency on PCI")
e5f31552674e ("ethernet: fix PTP_1588_CLOCK dependencies")
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
Adding selftests for the newly added functionality to call bpf_setsockopt()
and bpf_getsockopt() from setsockopt BPF programs.
Test Details:
1. BPF Program
Checks for changes in IPV6_TCLASS(SOL_IPV6) via setsockopt
If the cca for the socket is not cubic do nothing
If the newly set value for IPV6_TCLASS is 45 (0x2d) (as per our use-case)
then change the cc from cubic to reno
2. User Space Program
Creates an AF_INET6 socket and set the cca for that to be "cubic"
Attach the program and set the IPV6_TCLASS to 0x2d using setsockopt
Verify the cca for the socket changed to reno
Signed-off-by: Prankur Gupta <[email protected]>
Signed-off-by: Daniel Borkmann <[email protected]>
Acked-by: Song Liu <[email protected]>
Link: https://lore.kernel.org/bpf/[email protected]
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Networking fixes, including fixes from bpf, wireless and mac80211
trees.
Current release - regressions:
- tipc: call tipc_wait_for_connect only when dlen is not 0
- mac80211: fix locking in ieee80211_restart_work()
Current release - new code bugs:
- bpf: add rcu_read_lock in bpf_get_current_[ancestor_]cgroup_id()
- ethernet: ice: fix perout start time rounding
- wwan: iosm: prevent underflow in ipc_chnl_cfg_get()
Previous releases - regressions:
- bpf: clear zext_dst of dead insns
- sch_cake: fix srchost/dsthost hashing mode
- vrf: reset skb conntrack connection on VRF rcv
- net/rds: dma_map_sg is entitled to merge entries
Previous releases - always broken:
- ethernet: bnxt: fix Tx path locking and races, add Rx path
barriers"
* tag 'net-5.14-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (42 commits)
net: dpaa2-switch: disable the control interface on error path
Revert "flow_offload: action should not be NULL when it is referenced"
iavf: Fix ping is lost after untrusted VF had tried to change MAC
i40e: Fix ATR queue selection
r8152: fix the maximum number of PLA bp for RTL8153C
r8152: fix writing USB_BP2_EN
mptcp: full fully established support after ADD_ADDR
mptcp: fix memory leak on address flush
net/rds: dma_map_sg is entitled to merge entries
net: mscc: ocelot: allow forwarding from bridge ports to the tag_8021q CPU port
net: asix: fix uninit value bugs
ovs: clear skb->tstamp in forwarding path
net: mdio-mux: Handle -EPROBE_DEFER correctly
net: mdio-mux: Don't ignore memory allocation errors
net: mdio-mux: Delete unnecessary devm_kfree
net: dsa: sja1105: fix use-after-free after calling of_find_compatible_node, or worse
sch_cake: fix srchost/dsthost hashing mode
ixgbe, xsk: clean up the resources in ixgbe_xsk_pool_enable error path
net: qlcnic: add missed unlock in qlcnic_83xx_flash_read32
mac80211: fix locking in ieee80211_restart_work()
...
|
|
This patch adds a 1ms delay to reduce flakyness of the test.
Signed-off-by: Yucong Sun <[email protected]>
Signed-off-by: Andrii Nakryiko <[email protected]>
Link: https://lore.kernel.org/bpf/[email protected]
|
|
Add test to use get_netns_cookie() from BPF_PROG_TYPE_SOCK_OPS.
Signed-off-by: Xu Liu <[email protected]>
Signed-off-by: Daniel Borkmann <[email protected]>
Acked-by: Song Liu <[email protected]>
Link: https://lore.kernel.org/bpf/[email protected]
|
|
Commit 09e856d54bda ("vrf: Reset skb conntrack connection on VRF rcv")
fixes the "reverse-DNAT" of an SNAT-ed packet over a VRF.
This patch adds a test for this scenario.
Signed-off-by: Lahav Schlesinger <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
Add the NCI testcase reading T4T Tag that has NFC TEST in plain text.
the virtual device application acts as T4T Tag in this testcase.
Signed-off-by: Bongsu Jeon <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
To reuse the start/stop discovery code in other testcase, extract the code.
Signed-off-by: Bongsu Jeon <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
To reuse the send_cmd_mt_nla for NLM_F_REQUEST and NLM_F_DUMP flag,
add the flags parameter to the function.
Signed-off-by: Bongsu Jeon <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
memcpy should be executed only in case nla_len's value is greater than 0.
Signed-off-by: Bongsu Jeon <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
nlattr could have a padding for 4 bytes alignment. So next nla's offset
should be calculated with a padding.
Signed-off-by: Bongsu Jeon <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|