aboutsummaryrefslogtreecommitdiff
path: root/tools
AgeCommit message (Collapse)AuthorFilesLines
2023-06-14perf srcline: Add a timeout to reading from addr2lineIan Rogers3-4/+14
addr2line may fail to send expected values causing perf to wait indefinitely. Add a 1 second timeout (twice the timeout for reading from /proc/pid/maps) so that such reads don't cause perf to appear to lock up. There are already checks that the file for addr2line contains a debug section but this isn't always sufficient. The problem was observed when a valid elf file would set the configuration for binutils addr2line, then a later read of vmlinux with ELF debug sections would cause a failing write/read which would block indefinitely. As a service to future readers, if the io hits eof or an error, cleanup the addr2line process. Signed-off-by: Ian Rogers <[email protected]> Cc: Adrian Hunter <[email protected]> Cc: Alexander Shishkin <[email protected]> Cc: Ingo Molnar <[email protected]> Cc: Jiri Olsa <[email protected]> Cc: Mark Rutland <[email protected]> Cc: Namhyung Kim <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: Yang Jihong <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2023-06-14tools api: Add simple timeout to io readIan Rogers1-1/+27
In situations like reading from a pipe it can be useful to have a timeout so that the caller doesn't block indefinitely. Implement a simple one based on poll. Signed-off-by: Ian Rogers <[email protected]> Cc: Adrian Hunter <[email protected]> Cc: Alexander Shishkin <[email protected]> Cc: Jiri Olsa <[email protected]> Cc: Mark Rutland <[email protected]> Cc: Namhyung Kim <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: Yang Jihong <[email protected]> Link: http://lore.kernel.org/lkml/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2023-06-14perf tool x86: Fix perf_env memory leakIan Rogers1-1/+1
Found by leak sanitizer: ``` ==1632594==ERROR: LeakSanitizer: detected memory leaks Direct leak of 21 byte(s) in 1 object(s) allocated from: #0 0x7f2953a7077b in __interceptor_strdup ../../../../src/libsanitizer/asan/asan_interceptors.cpp:439 #1 0x556701d6fbbf in perf_env__read_cpuid util/env.c:369 #2 0x556701d70589 in perf_env__cpuid util/env.c:465 #3 0x55670204bba2 in x86__is_amd_cpu arch/x86/util/env.c:14 #4 0x5567020487a2 in arch__post_evsel_config arch/x86/util/evsel.c:83 #5 0x556701d8f78b in evsel__config util/evsel.c:1366 #6 0x556701ef5872 in evlist__config util/record.c:108 #7 0x556701cd6bcd in test__PERF_RECORD tests/perf-record.c:112 #8 0x556701cacd07 in run_test tests/builtin-test.c:236 #9 0x556701cacfac in test_and_print tests/builtin-test.c:265 #10 0x556701cadddb in __cmd_test tests/builtin-test.c:402 #11 0x556701caf2aa in cmd_test tests/builtin-test.c:559 #12 0x556701d3b557 in run_builtin tools/perf/perf.c:323 #13 0x556701d3bac8 in handle_internal_command tools/perf/perf.c:377 #14 0x556701d3be90 in run_argv tools/perf/perf.c:421 #15 0x556701d3c3f8 in main tools/perf/perf.c:537 #16 0x7f2952a46189 in __libc_start_call_main ../sysdeps/nptl/libc_start_call_main.h:58 SUMMARY: AddressSanitizer: 21 byte(s) leaked in 1 allocation(s). ``` Fixes: f7b58cbdb3ff36eb ("perf mem/c2c: Add load store event mappings for AMD") Signed-off-by: Ian Rogers <[email protected]> Acked-by: Ravi Bangoria <[email protected]> Tested-by: Arnaldo Carvalho de Melo <[email protected]> Cc: Adrian Hunter <[email protected]> Cc: Alexander Shishkin <[email protected]> Cc: Ingo Molnar <[email protected]> Cc: Jiri Olsa <[email protected]> Cc: Mark Rutland <[email protected]> Cc: Namhyung Kim <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: Ravi Bangoria <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2023-06-14selftests/user_events: Adapt dyn_test to non-persist eventsBeau Belgrave1-41/+136
Now that user_events does not honor persist events the dynamic_events file cannot be easily used to test parsing and matching cases. Update dyn_test to use the direct ABI file instead of dynamic_events so that we still have testing coverage until persist events and dynamic_events file integration has been decided. Link: https://lkml.kernel.org/r/[email protected] Signed-off-by: Beau Belgrave <[email protected]> Signed-off-by: Steven Rostedt (Google) <[email protected]>
2023-06-14selftests/user_events: Ensure auto cleanup works as expectedBeau Belgrave1-11/+38
User events now auto cleanup upon the last reference put. Update ftrace_test to ensure this works as expected. Ensure EBUSY delays while event is being deleted do not cause transient failures by waiting and re-attempting. Link: https://lkml.kernel.org/r/[email protected] Signed-off-by: Beau Belgrave <[email protected]> Signed-off-by: Steven Rostedt (Google) <[email protected]>
2023-06-14selftests/user_events: Add perf self-test for empty arguments eventssunliming1-0/+53
Tests to ensure events that has empty arguments can input trace record correctly when using perf. Link: https://lkml.kernel.org/r/[email protected] Acked-by: Beau Belgrave <[email protected]> Acked-by: Masami Hiramatsu (Google) <[email protected]> Signed-off-by: sunliming <[email protected]> Signed-off-by: Steven Rostedt (Google) <[email protected]>
2023-06-14selftests/user_events: Clear the events after perf self-testsunliming1-0/+29
When the self test is completed, perf self-test left the user events not to be cleared. Clear the events by unregister and delete the event. Link: https://lkml.kernel.org/r/[email protected] Acked-by: Beau Belgrave <[email protected]> Acked-by: Masami Hiramatsu (Google) <[email protected]> Signed-off-by: sunliming <[email protected]> Signed-off-by: Steven Rostedt (Google) <[email protected]>
2023-06-14selftests/user_events: Add ftrace self-test for empty arguments eventssunliming1-0/+33
Tests to ensure events that has empty arguments can input trace record correctly when using ftrace. Link: https://lkml.kernel.org/r/[email protected] Acked-by: Beau Belgrave <[email protected]> Acked-by: Masami Hiramatsu (Google) <[email protected]> Signed-off-by: sunliming <[email protected]> Signed-off-by: Steven Rostedt (Google) <[email protected]>
2023-06-14tracing/user_events: Prevent same name but different args eventsunliming1-0/+6
User processes register name_args for events. If the same name but different args event are registered. The trace outputs of second event are printed as the first event. This is incorrect. Return EADDRINUSE back to the user process if the same name but different args event has being registered. Link: https://lore.kernel.org/linux-trace-kernel/[email protected] Signed-off-by: sunliming <[email protected]> Reviewed-by: Masami Hiramatsu (Google) <[email protected]> Acked-by: Beau Belgrave <[email protected]> Signed-off-by: Steven Rostedt (Google) <[email protected]>
2023-06-14selftests: forwarding: hw_stats_l3: Set addrgenmode in a separate stepDanielle Ratson1-4/+7
Setting the IPv6 address generation mode of a net device during its creation never worked, but after commit b0ad3c179059 ("rtnetlink: call validate_linkmsg in rtnl_create_link") it explicitly fails [1]. The failure is caused by the fact that validate_linkmsg() is called before the net device is registered, when it still does not have an 'inet6_dev'. Likewise, raising the net device before setting the address generation mode is meaningless, because by the time the mode is set, the address has already been generated. Therefore, fix the test to first create the net device, then set its IPv6 address generation mode and finally bring it up. [1] # ip link add name mydev addrgenmode eui64 type dummy RTNETLINK answers: Address family not supported by protocol Fixes: ba95e7930957 ("selftests: forwarding: hw_stats_l3: Add a new test") Signed-off-by: Danielle Ratson <[email protected]> Reviewed-by: Ido Schimmel <[email protected]> Signed-off-by: Petr Machata <[email protected]> Link: https://lore.kernel.org/r/f3b05d85b2bc0c3d6168fe8f7207c6c8365703db.1686580046.git.petrm@nvidia.com Signed-off-by: Paolo Abeni <[email protected]>
2023-06-13selftests/tc-testing: Remove configs that no longer existVlad Buslov1-5/+0
Some qdiscs and classifiers have recently been retired from kernel. However, tc-testing config is still cluttered with them which causes noise when using merge_config.sh script to update existing config for tc-testing compatibility. Remove the config settings for affected qdiscs and classifiers. Fixes: fb38306ceb9e ("net/sched: Retire ATM qdisc") Fixes: 051d44209842 ("net/sched: Retire CBQ qdisc") Fixes: bbe77c14ee61 ("net/sched: Retire dsmark qdisc") Fixes: 265b4da82dbf ("net/sched: Retire rsvp classifier") Fixes: 8c710f75256b ("net/sched: Retire tcindex classifier") Signed-off-by: Vlad Buslov <[email protected]> Reviewed-by: Pedro Tammela <[email protected]> Signed-off-by: Jakub Kicinski <[email protected]>
2023-06-13selftests/tc-testing: Fix SFB db testVlad Buslov1-2/+2
Setting very small value of db like 10ms introduces rounding errors when converting to/from jiffies on some kernel configs. For example, on 250hz the actual value will be set to 12ms which causes the test to fail: # $ sudo ./tdc.py -d eth2 -e 3410 # -- ns/SubPlugin.__init__ # Test 3410: Create SFB with db setting # # All test results: # # 1..1 # not ok 1 3410 - Create SFB with db setting # Could not match regex pattern. Verify command output: # qdisc sfb 1: root refcnt 2 rehash 600s db 12ms limit 1000p max 25p target 20p increment 0.000503548 decrement 4.57771e-05 penalty_rate 10pps penalty_burst 20p Set the value to 100ms instead which currently seem to work on 100hz, 250hz, 300hz and 1000hz kernel configs. Fixes: 6ad92dc56fca ("selftests/tc-testing: add selftests for sfb qdisc") Signed-off-by: Vlad Buslov <[email protected]> Reviewed-by: Pedro Tammela <[email protected]> Signed-off-by: Jakub Kicinski <[email protected]>
2023-06-13selftests/tc-testing: Fix Error: failed to find target LOGVlad Buslov1-0/+1
Add missing netfilter config dependency. Fixes following example error when running tests via tdc.sh for all XT tests: # $ sudo ./tdc.py -d eth2 -e 2029 # Test 2029: Add xt action with log-prefix # exit: 255 # exit: 0 # failed to find target LOG # # bad action parsing # parse_action: bad value (7:xt)! # Illegal "action" # # -----> teardown stage *** Could not execute: "$TC actions flush action xt" # # -----> teardown stage *** Error message: "Error: Cannot flush unknown TC action. # We have an error flushing # " # returncode 1; expected [0] # # -----> teardown stage *** Aborting test run. # # <_io.BufferedReader name=3> *** stdout *** # # <_io.BufferedReader name=5> *** stderr *** # "-----> teardown stage" did not complete successfully # Exception <class '__main__.PluginMgrTestFail'> ('teardown', ' failed to find target LOG\n\nbad action parsing\nparse_action: bad value (7:xt)!\nIllegal "action"\n', '"-----> teardown stage" did not complete successfully') (caught in test_runner, running test 2 2029 Add xt action with log-prefix stage teardown) # --------------- # traceback # File "/images/src/linux/tools/testing/selftests/tc-testing/./tdc.py", line 495, in test_runner # res = run_one_test(pm, args, index, tidx) # File "/images/src/linux/tools/testing/selftests/tc-testing/./tdc.py", line 434, in run_one_test # prepare_env(args, pm, 'teardown', '-----> teardown stage', tidx['teardown'], procout) # File "/images/src/linux/tools/testing/selftests/tc-testing/./tdc.py", line 245, in prepare_env # raise PluginMgrTestFail( # --------------- # accumulated output for this test: # failed to find target LOG # # bad action parsing # parse_action: bad value (7:xt)! # Illegal "action" # # --------------- # # All test results: # # 1..1 # ok 1 2029 - Add xt action with log-prefix # skipped - "-----> teardown stage" did not complete successfully Fixes: 910d504bc187 ("selftests/tc-testings: add selftests for xt action") Signed-off-by: Vlad Buslov <[email protected]> Reviewed-by: Pedro Tammela <[email protected]> Signed-off-by: Jakub Kicinski <[email protected]>
2023-06-13selftests/tc-testing: Fix Error: Specified qdisc kind is unknown.Vlad Buslov1-0/+1
All TEQL tests assume that sch_teql module is loaded. Load module in tdc.sh before running qdisc tests. Fixes following example error when running tests via tdc.sh for all TEQL tests: # $ sudo ./tdc.py -d eth2 -e 84a0 # -- ns/SubPlugin.__init__ # Test 84a0: Create TEQL with default setting # exit: 2 # exit: 0 # Error: Specified qdisc kind is unknown. # # -----> teardown stage *** Could not execute: "$TC qdisc del dev $DUMMY handle 1: root" # # -----> teardown stage *** Error message: "Error: Invalid handle. # " # returncode 2; expected [0] # # -----> teardown stage *** Aborting test run. # # <_io.BufferedReader name=3> *** stdout *** # # <_io.BufferedReader name=5> *** stderr *** # "-----> teardown stage" did not complete successfully # Exception <class '__main__.PluginMgrTestFail'> ('teardown', 'Error: Specified qdisc kind is unknown.\n', '"-----> teardown stage" did not complete successfully') (caught in test_runner, running test 2 84a0 Create TEQL with default setting stage teardown) # --------------- # traceback # File "/images/src/linux/tools/testing/selftests/tc-testing/./tdc.py", line 495, in test_runner # res = run_one_test(pm, args, index, tidx) # File "/images/src/linux/tools/testing/selftests/tc-testing/./tdc.py", line 434, in run_one_test # prepare_env(args, pm, 'teardown', '-----> teardown stage', tidx['teardown'], procout) # File "/images/src/linux/tools/testing/selftests/tc-testing/./tdc.py", line 245, in prepare_env # raise PluginMgrTestFail( # --------------- # accumulated output for this test: # Error: Specified qdisc kind is unknown. # # --------------- # # All test results: # # 1..1 # ok 1 84a0 - Create TEQL with default setting # skipped - "-----> teardown stage" did not complete successfully Fixes: cc62fbe114c9 ("selftests/tc-testing: add selftests for teql qdisc") Signed-off-by: Vlad Buslov <[email protected]> Reviewed-by: Victor Nogueira <[email protected]> Reviewed-by: Pedro Tammela <[email protected]> Signed-off-by: Jakub Kicinski <[email protected]>
2023-06-13perf vendor events arm64: Add default tags into topdown L1 metricsKan Liang1-4/+8
Add the default tags for ARM as well. Signed-off-by: Kan Liang <[email protected]> Acked-by: Ian Rogers <[email protected]> Cc: Adrian Hunter <[email protected]> Cc: Ahmad Yasin <[email protected]> Cc: Andi Kleen <[email protected]> Cc: Ingo Molnar <[email protected]> Cc: Jing Zhang <[email protected]> Cc: Jiri Olsa <[email protected]> Cc: John Garry <[email protected]> Cc: Namhyung Kim <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: Stephane Eranian <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2023-06-13pert tests: Support metricgroup perf stat JSON outputKan Liang1-0/+3
A new field metricgroup has been added in the perf stat JSON output. Support it in the test case. Signed-off-by: Kan Liang <[email protected]> Acked-by: Ian Rogers <[email protected]> Cc: Adrian Hunter <[email protected]> Cc: Ahmad Yasin <[email protected]> Cc: Andi Kleen <[email protected]> Cc: Ingo Molnar <[email protected]> Cc: Jiri Olsa <[email protected]> Cc: Namhyung Kim <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: Stephane Eranian <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2023-06-13perf tests task_analyzer: Skip tests if no libtraceevent supportAditya Gupta1-0/+18
Test "perf script task-analyzer tests" fails in environment with missing libtraceevent support, as perf record fails to create the perf.data file, which further tests depend on. Instead, when perf is not compiled with libtraceevent support, skip those tests instead of failing them, by checking the output of `perf record --dry-run` to see if it prints the error "libtraceevent is necessary for tracepoint support" For the following output, perf compiled with: `make NO_LIBTRACEEVENT=1` Before the patch: 108: perf script task-analyzer tests : test child forked, pid 24105 failed to open perf.data: No such file or directory (try 'perf record' first) FAIL: "invokation of perf script report task-analyzer command failed" Error message: "" FAIL: "test_basic" Error message: "Failed to find required string:'Comm'." failed to open perf.data: No such file or directory (try 'perf record' first) FAIL: "invokation of perf script report task-analyzer --ns --rename-comms-by-tids 0:random command failed" Error message: "" FAIL: "test_ns_rename" Error message: "Failed to find required string:'Comm'." failed to open perf.data: No such file or directory (try 'perf record' first) <...> perf script task-analyzer tests: FAILED! With this patch, the script instead returns 2 signifying SKIP, and after the patch: 108: perf script task-analyzer tests : test child forked, pid 26010 libtraceevent is necessary for tracepoint support WARN: Skipping tests. No libtraceevent support test child finished with -2 perf script task-analyzer tests: Skip Fixes: e8478b84d6ba9ccf ("perf test: Add new task-analyzer tests") Signed-off-by: Aditya Gupta <[email protected]> Cc: Disha Goel <[email protected]> Cc: Ian Rogers <[email protected]> Cc: Jiri Olsa <[email protected]> Cc: John Garry <[email protected]> Cc: Madhavan Srinivasan <[email protected]> Cc: Namhyung Kim <[email protected]> Cc: Petar Gligoric <[email protected]> Cc: Ravi Bangoria <[email protected]> Cc: [email protected] Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Athira Rajeev <[email protected]> Signed-off-by: Kajol Jain <[email protected]> Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2023-06-13perf tests task_analyzer: Print command that failed instead of just "perf"Aditya Gupta1-12/+12
Instead of printing "perf command failed" everytime, print the exact command that run earlier Signed-off-by: Aditya Gupta <[email protected]> Acked-by: Hagen Paul Pfeifer <[email protected]> Cc: Disha Goel <[email protected]> Cc: Ian Rogers <[email protected]> Cc: Jiri Olsa <[email protected]> Cc: John Garry <[email protected]> Cc: Madhavan Srinivasan <[email protected]> Cc: Namhyung Kim <[email protected]> Cc: Ravi Bangoria <[email protected]> Cc: [email protected] Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Athira Rajeev <[email protected]> Signed-off-by: Kajol Jain <[email protected]> Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2023-06-13perf tests task_analyzer: Fix bad substitution ${$1}Aditya Gupta1-1/+1
${$1} gives bad substitution error on sh, bash, and zsh. This seems like a typo, and this patch modifies it to $1, since that is what it's usage looks like from wherever `check_exec_0` is called. This issue due to ${$1} caused all function calls to give error in `find_str_or_fail` line, and so no test runs completely. But 'perf test "perf script task-analyzer tests"' wrongly reports that tests passed with the status OK, which is wrong considering the tests didn't even run completely Fixes: e8478b84d6ba9ccf ("perf test: add new task-analyzer tests") Signed-off-by: Aditya Gupta <[email protected]> Signed-off-by: Athira Rajeev <[email protected]> Signed-off-by: Kajol Jain <[email protected]> Cc: Disha Goel <[email protected]> Cc: Hagen Paul Pfeifer <[email protected]> Cc: Ian Rogers <[email protected]> Cc: Jiri Olsa <[email protected]> Cc: John Garry <[email protected]> Cc: Madhavan Srinivasan <[email protected]> Cc: Namhyung Kim <[email protected]> Cc: Petar Gligoric <[email protected]> Cc: Ravi Bangoria <[email protected]> Cc: [email protected] Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2023-06-13perf tests stat+shadow_stat.sh: Fix all POSIX sh warnings found using shellcheckSpoorthy S1-2/+2
Running shellcheck -S on stat+shadow_stat.sh testcase, generates SC2046 and SC2034 warnings, $ shellcheck -S warning tests/shell/stat+shadow_stat.sh res=`printf "%.2f" $(echo "scale=6; $num / $cyc" | bc -q)` : Quote this to prevent word splitting To address the POSIX shell warnings used quotes in the printf expressions, to prevent word splitting. Signed-off-by: Spoorthy S <[email protected]> Cc: Disha Goel <[email protected]> Cc: Ian Rogers <[email protected]> Cc: Jiri Olsa <[email protected]> Cc: John Garry <[email protected]> Cc: Madhavan Srinivasan <[email protected]> Cc: Namhyung Kim <[email protected]> Cc: Ravi Bangoria <[email protected]> Cc: [email protected] Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Athira Rajeev <[email protected]> Signed-off-by: Kajol Jain <[email protected]> Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2023-06-13perf tests test_brstack.sh: Fix all POSIX sh warningsGeetika1-6/+6
Fix all the POSIX sh warnings in perf shell test test_brstack.sh Warnings fixed : * In POSIX sh, using lower/mixed case for signal names is undefined. Correcting that in this script. * In POSIX sh, 'local' is undefined. local is supported in many shells, but it's not in POSIX. In POSIX sh, you can adopt some convention to avoid accidentally overwriting variables names, e.g. prefixing with the function name, that is what I have done here. Signed-off-by: Geetika <[email protected]> Cc: Disha Goel <[email protected]> Cc: Ian Rogers <[email protected]> Cc: Jiri Olsa <[email protected]> Cc: John Garry <[email protected]> Cc: Madhavan Srinivasan <[email protected]> Cc: Namhyung Kim <[email protected]> Cc: Ravi Bangoria <[email protected]> Cc: [email protected] Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Athira Rajeev <[email protected]> Signed-off-by: Kajol Jain <[email protected]> Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2023-06-13perf tests shell: Fixed shellcheck warningsSamir Mulani3-11/+11
Fixed the shellcheck warnings in buildid.sh, record+probe_libc_inet_pton.sh and record+script_probe_vfs_getname.sh perf shell scripts: 1. Prefer [ p ] && [ q ] as [ p -a q ] is not well defined. 2. Prefer [ p ] || [ q ] as [ p -o q ] is not well defined. 3. Used * argument to avoid the argument mixes string and array 4. Resolved issue for variable refernce, where the variable is being used before it has been initialized. 5. Resolved word splitting issue (syntax error). 6. The "err" variable has been removed from buildid.sh since it is not used anywhere in the code. Signed-off-by: Samir Mulani <[email protected]> Cc: Disha Goel <[email protected]> Cc: Ian Rogers <[email protected]> Cc: Jiri Olsa <[email protected]> Cc: John Garry <[email protected]> Cc: Madhavan Srinivasan <[email protected]> Cc: Namhyung Kim <[email protected]> Cc: Ravi Bangoria <[email protected]> Cc: [email protected] Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Athira Rajeev <[email protected]> Signed-off-by: Kajol Jain <[email protected]> Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2023-06-13perf tests lock_contention: Fix shellscript errorsAbhirup Deb1-35/+35
Use quotes around variables to prevent POSIX word expansion, use uppercase for signals(INT, TERM, EXIT) to avoid mixed/lower case naming of signals and replace "==" with "=" as "==" is not supported by POSIX shell. Signed-off-by: Abhirup Deb <[email protected]> Cc: Disha Goel <[email protected]> Cc: Ian Rogers <[email protected]> Cc: Jiri Olsa <[email protected]> Cc: John Garry <[email protected]> Cc: Madhavan Srinivasan <[email protected]> Cc: Namhyung Kim <[email protected]> Cc: Ravi Bangoria <[email protected]> Cc: [email protected] Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Anushree Mathur <[email protected]> Signed-off-by: Athira Rajeev <[email protected]> Signed-off-by: Kajol Jain <[email protected]> Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2023-06-13perf tests test_arm_spe: Address shellcheck warnings about signal name caseAbhirup Deb1-1/+1
Running shellcheck -S on test_arm_spe.sh throws below warnings: #shellcheck -S warning tests/shell/test_arm_spe.sh In tests/shell/test_arm_spe.sh line 30: trap cleanup_files exit term int ^--^ SC3049 (warning): In POSIX sh, using lower/mixed case for signal names is undefined. ^--^ SC3049 (warning): In POSIX sh, using lower/mixed case for signal names is undefined. ^-^ SC3049 (warning): In POSIX sh, using lower/mixed case for signal names is undefined. Fixed this issue by using uppercase for "EXIT", "TERM" and "INIT" signals to avoid using lower/mixed case for signal names as input. Signed-off-by: Abhirup Deb <[email protected]> Cc: Disha Goel <[email protected]> Cc: Ian Rogers <[email protected]> Cc: Jiri Olsa <[email protected]> Cc: John Garry <[email protected]> Cc: Madhavan Srinivasan <[email protected]> Cc: Namhyung Kim <[email protected]> Cc: Ravi Bangoria <[email protected]> Cc: [email protected] Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Athira Rajeev <[email protected]> Signed-off-by: Kajol Jain <[email protected]> Signed-off-by: Mukesh Chaurasiya <[email protected]> Signed-off-by: Ojaswin Mujoo <[email protected]> Signed-off-by: Piyush Sachdeva <[email protected]> Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2023-06-13perf tests test_task_analyzer: Fix shellcheck issuesAboorva Devarajan1-27/+27
Fixed the following shellcheck issues in test_task_analyzer.sh file: SC2086: Double quote to prevent globbing and word splitting warnings in shell-check. Fixes the following shellcheck issues, SC2086: Double quote to prevent globbing and word splitting warnings in shell-check. Before Patch: $ shellcheck ./test_task_analyzer.sh | grep "SC2086" | ... In ./test_task_analyzer.sh line 13: SC2086: Double quote to prevent globbing and word splitting. In ./test_task_analyzer.sh line 24: SC2086: Double quote to prevent globbing and word splitting. In ./test_task_analyzer.sh line 39: SC2086: Double quote to prevent globbing and word splitting. After Patch: $ shellcheck ./test_task_analyzer.sh | grep -i "SC2086" None perf test result after patch: PASS: "test_basic" PASS: "test_ns_rename" PASS: "test_ms_filtertasks_highlight" PASS: "test_extended_times_timelimit_limittasks" PASS: "test_summary" PASS: "test_summaryextended" PASS: "test_summaryonly" PASS: "test_extended_times_summary_ns" PASS: "test_extended_times_summary_ns" PASS: "test_csv" PASS: "test_csvsummary" PASS: "test_csv_extended_times" PASS: "test_csvsummary_extended" Signed-off-by: Aboorva Devarajan <[email protected]> Cc: Disha Goel <[email protected]> Cc: Ian Rogers <[email protected]> Cc: Jiri Olsa <[email protected]> Cc: John Garry <[email protected]> Cc: Madhavan Srinivasan <[email protected]> Cc: Namhyung Kim <[email protected]> Cc: Ravi Bangoria <[email protected]> Cc: [email protected] Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Athira Rajeev <[email protected]> Signed-off-by: Kajol Jain <[email protected]> Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2023-06-13perf tests stat_all_metrics: Fix shellcheck warning SC2076Barnali Guha Thakurata1-3/+3
Fixed shellcheck warning SC2076 in stat_all_metrics.sh. Before the patch: shell$ shellcheck stat_all_metrics.sh In stat_all_metrics.sh line 9: if [[ "$result" =~ "${m:0:50}" ]] || [[ "$result" =~ "<not supported>" ]] ^---------^ SC2076: Don't quote right-hand side of =~, it'll match literally rather than as a regex. In stat_all_metrics.sh line 15: if [[ "$result" =~ "${m:0:50}" ]] ^---------^ SC2076: Don't quote right-hand side of =~, it'll match literally rather than as a regex. In stat_all_metrics.sh line 22: if [[ "$result" =~ "${m:0:50}" ]] ^---------^ SC2076: Don't quote right-hand side of =~, it'll match literally rather than as a regex. After the patch: shell$ shellcheck stat_all_metrics.sh shell$ Signed-off-by: Barnali Guha Thakurata <[email protected]> Cc: Disha Goel <[email protected]> Cc: Ian Rogers <[email protected]> Cc: Jiri Olsa <[email protected]> Cc: John Garry <[email protected]> Cc: Madhavan Srinivasan <[email protected]> Cc: Namhyung Kim <[email protected]> Cc: Ravi Bangoria <[email protected]> Cc: [email protected] Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Athira Rajeev <[email protected]> Signed-off-by: Kajol Jain <[email protected]> Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2023-06-13perf tests test_arm_coresight: Shellcheck fixesAnushree Mathur1-3/+3
Fixed the following shellcheck issues in test_arm_coresight.sh file: In tools/perf/tests/shell/test_arm_coresight.sh line 31: trap - exit term int ^--^ SC2039: In POSIX sh, using lower/mixed case for signal names is undefined. ^--^ SC2039: In POSIX sh, using lower/mixed case for signal names is undefined. ^-^ SC2039: In POSIX sh, using lower/mixed case for signal names is undefined. In tools/perf/tests/shell/test_arm_coresight.sh line 35: trap cleanup_files exit term int ^--^ SC2039: In POSIX sh, using lower/mixed case for signal names is undefined. ^--^ SC2039: In POSIX sh, using lower/mixed case for signal names is undefined. ^-^ SC2039: In POSIX sh, using lower/mixed case for signal names is undefined. In tools/perf/tests/shell/test_arm_coresight.sh line 92: if [ $? -eq 0 -a -e "$1/enable_sink" ]; then ^-- SC2166: Prefer [ p ] && [ q ] as [ p -a q ] is not well defined. Fixed above warnings by: 1)Capitalize signals(INT, TERM, EXIT) to avoid mixed/lower case naming of signals. 2)Expression [p -a q] was not defined,changed it to [p] && [q] to avoid the ambiguity as this is older format using -a or -o ,now we use [p] && [q] in place of [p -a q] and [p] || [q] in place of [p -o q]. Result after fixing the issues: shell$ shellcheck -S warning test_arm_coresight.sh shell$ Signed-off-by: Anushree Mathur <[email protected]> Cc: Disha Goel <[email protected]> Cc: Ian Rogers <[email protected]> Cc: Jiri Olsa <[email protected]> Cc: John Garry <[email protected]> Cc: Madhavan Srinivasan <[email protected]> Cc: Namhyung Kim <[email protected]> Cc: Ravi Bangoria <[email protected]> Cc: [email protected] Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Athira Rajeev <[email protected]> Signed-off-by: Kajol Jain <[email protected]> Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2023-06-13perf tests stat+csv_output: Fix shellcheck warningsKorrapati Likhitha1-2/+2
Running the shellcheck on stat+csv_output resulted in the following warning. Result with shellcheck without patch: ===== $ shellcheck -S warning stat+csv_output.sh In stat+csv_output.sh line 23: [ $(uname -m) = "s390x" ] && exp='^[6-7]$' ^---------^ SC2046: Quote this to prevent word splitting. In stat+csv_output.sh line 51: [ $(id -u) != 0 ] && [ $(cat /proc/sys/kernel/perf_event_paranoid) -gt $1 ] ^------^ SC2046: Quote this to prevent word splitting. ^-- SC2046: Quote this to prevent word splitting. ===== Fixed the warning SC2046 by adding quotes to prevent word splitting. Result with shellcheck with patch: ===== $ shellcheck -S warning tests/shell/stat+csv_output.sh $ ./perf test "stat CSV output linter" 96: perf stat CSV output linter : Ok ===== Signed-off-by: Korrapati Likhitha <[email protected]> Cc: Disha Goel <[email protected]> Cc: Ian Rogers <[email protected]> Cc: Jiri Olsa <[email protected]> Cc: John Garry <[email protected]> Cc: Madhavan Srinivasan <[email protected]> Cc: Namhyung Kim <[email protected]> Cc: Ravi Bangoria <[email protected]> Cc: [email protected] Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Athira Rajeev <[email protected]> Signed-off-by: Kajol Jain <[email protected]> Signed-off-by: Sathvika Vasireddy <[email protected]> Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2023-06-13perf tests daemon: Address shellcheck warningsShirisha G1-38/+75
Running shellcheck -S on daemon.sh throws below warnings: Result from shellcheck: # shellcheck -S warning daemon.sh local line_name=`echo "${line}" | awk 'BEGIN { FS = ":" } ; { print $2 }'` ^-------^ SC2155: Declare and assign separately to avoid masking return values. trap "echo 'FAILED: Signal caught'; daemon_exit ${config}; exit 1" SIGINT SIGTERM ^-------^ SC2064: Use single quotes, otherwise this expands now rather than when signalled. count=`ls ${base}/session-test/ | grep perf.data | wc -l` ^-- SC2010: Don't use ls | grep. Use a glob or a for loop with a condition to allow non-alphanumeric filenames. if [ ${size} != "OK" -o ${type} != "OK" ]; then ^-- SC2166: Prefer [ p ] || [ q ] as [ p -o q ] is not well defined. Fixed above warnings by: - declaring and assigning local variables separately - To fix SC2010, instead of using "ls | grep", used glob to allow non-alphanumeric filenames - Used single quotes to prevent expanding. Result from shellcheck after patch changes: $ shellcheck -S warning daemon.sh $ echo $? 0 Signed-off-by: Shirisha G <[email protected]> Cc: Disha Goel <[email protected]> Cc: Ian Rogers <[email protected]> Cc: Jiri Olsa <[email protected]> Cc: John Garry <[email protected]> Cc: Madhavan Srinivasan <[email protected]> Cc: Namhyung Kim <[email protected]> Cc: Ravi Bangoria <[email protected]> Cc: [email protected] Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Athira Rajeev <[email protected]> Signed-off-by: Kajol Jain <[email protected]> Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2023-06-13perf tests arm_callgraph_fp: Address shellcheck warnings about signal names ↵Spoorthy S1-3/+3
and adding double quotes for expression Running shellcheck -S on test_arm_calligraph_fp throws warnings SC2086 and SC3049,       $shellcheck -S warning tests/shell/test_arm_callgraph_fp.sh          rm -f $PERF_DATA             : Double quote to prevent globbing and word splitting.          trap cleanup_files exit term int       : In POSIX sh, using lower/mixed case for signal names is undefined. After fixing the warnings,       $shellcheck tests/shell/test_arm_callgraph_fp.sh       $ echo $?       0 To address the POSIX shell warnings added changes to convert Lowercase signal names to uppercase in the script and double quoted the command substitutions($fix to "$fix") to solve Globbing warnings. Signed-off-by: Spoorthy S<[email protected]> Cc: Disha Goel <[email protected]> Cc: Ian Rogers <[email protected]> Cc: Jiri Olsa <[email protected]> Cc: John Garry <[email protected]> Cc: Madhavan Srinivasan <[email protected]> Cc: Namhyung Kim <[email protected]> Cc: Ravi Bangoria <[email protected]> Cc: [email protected] Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Athira Rajeev <[email protected]> Signed-off-by: Kajol Jain <[email protected]> Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2023-06-13perf tests stat+json_output: Address shellcheck warningsDisha Goel1-1/+1
Running shellcheck on stat+json_output testcase, generates below warning: [ $(id -u) != 0 ] && [ $(cat /proc/sys/kernel/perf_event_paranoid) -gt $1 ] ^------^ SC2046 (warning): Quote this to prevent word splitting. ^-- SC2046 (warning): Quote this to prevent word splitting. Fixed the warning by adding quotes to avoid word splitting. ShellCheck result with patch: # shellcheck -S warning stat+json_output.sh # perf test result after the change: 94: perf stat JSON output linter : Ok Signed-off-by: Disha Goel <[email protected]> Cc: Ian Rogers <[email protected]> Cc: Jiri Olsa <[email protected]> Cc: John Garry <[email protected]> Cc: Kajol Jain <[email protected]> Cc: Madhavan Srinivasan <[email protected]> Cc: Namhyung Kim <[email protected]> Cc: Ravi Bangoria <[email protected]> Cc: [email protected] Link: https://lore.kernel.org/linux-perf-users/[email protected] Signed-off-by: Athira Rajeev <[email protected]> Signed-off-by: Kajol Jain <[email protected]> Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2023-06-13perf python scripting: Get rid of unused import in arm-cs-trace-disasmSourabh Jain1-1/+0
The arm-cs-trace-disasm.py script doesn't use the sys library, so remove the import. Report by pylint: W0611: Unused import sys (unused-import) Signed-off-by: Sourabh Jain <[email protected]> Cc: Athira Rajeev <[email protected]> Cc: Disha Goel <[email protected]> Cc: Ian Rogers <[email protected]> Cc: Jiri Olsa <[email protected]> Cc: John Garry <[email protected]> Cc: Kajol Jain <[email protected]> Cc: Madhavan Srinivasan <[email protected]> Cc: Namhyung Kim <[email protected]> Cc: Ravi Bangoria <[email protected]> Cc: [email protected] Link: https://lore.kernel.org/linux-perf-users/[email protected] Signed-off-by: Athira Rajeev <[email protected]> Signed-off-by: Kajol Jain <[email protected]> Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2023-06-13perf tool x86: Consolidate is_amd check into single functionRavi Bangoria5-31/+31
There are multiple places where x86 specific code determines AMD vs Intel arch and acts based on that. Consolidate those checks into a single function. Signed-off-by: Ravi Bangoria <[email protected]> Acked-by: Ian Rogers <[email protected]> Cc: Adrian Hunter <[email protected]> Cc: Ali Saidi <[email protected]> Cc: Ananth Narayan <[email protected]> Cc: James Clark <[email protected]> Cc: Jiri Olsa <[email protected]> Cc: Kan Liang <[email protected]> Cc: Leo Yan <[email protected]> Cc: Madhavan Srinivasan <[email protected]> Cc: Mark Rutland <[email protected]> Cc: Namhyung Kim <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: Sandipan Das <[email protected]> Cc: Santosh Shukla <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2023-06-13perf parse-events: Avoid string for PE_BP_COLON, PE_BP_SLASHIan Rogers3-15/+2
There's no need to read the string ':' or '/' for PE_BP_COLON or PE_BP_SLASH and doing so causes parse-events.y to leak memory. The original patch has a committer note about not using these tokens presumably as yacc spotted they were a memory leak because no %destructor could be run. Remove the unused token workaround as there is now no value associated with these tokens. Fixes: f0617f526cb0c482 ("perf parse: Allow config terms with breakpoints") Signed-off-by: Ian Rogers <[email protected]> Cc: Adrian Hunter <[email protected]> Cc: Alexander Shishkin <[email protected]> Cc: Ingo Molnar <[email protected]> Cc: Jiri Olsa <[email protected]> Cc: Kan Liang <[email protected]> Cc: Mark Rutland <[email protected]> Cc: Namhyung Kim <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: Rob Herring <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2023-06-13perf metric: Fix no group checkKan Liang1-1/+1
The no group check fails if there is more than one meticgroup in the metricgroup_no_group. The first parameter of the match_metric() should be the string, while the substring should be the second parameter. Fixes: ccc66c6092802d68 ("perf metric: JSON flag to not group events if gathering a metric group") Signed-off-by: Kan Liang <[email protected]> Acked-by: Ian Rogers <[email protected]> Cc: Adrian Hunter <[email protected]> Cc: Ahmad Yasin <[email protected]> Cc: Andi Kleen <[email protected]> Cc: Ian Rogers <[email protected]> Cc: Ingo Molnar <[email protected]> Cc: Jiri Olsa <[email protected]> Cc: Namhyung Kim <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: Stephane Eranian <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2023-06-13tools api fs: More thread safety for global filesystem variablesIan Rogers1-125/+86
Multiple threads, such as with "perf top", may race to initialize a file system path like hugetlbfs. The racy initialization of the path leads to at least memory leaks. To avoid this initialize each fs for reading the mount point path with pthread_once. Mounting the file system may also be racy, so introduce a mutex over the function. This does mean that the path is being accessed with and without a mutex, which is inherently racy but hopefully benign, especially as there are fewer callers to fs__mount. Remove the fs__entries by directly using global variables, this was done as no argument like the index can be passed to the init once routine. Issue found and tested with "perf top" and address sanitizer. Signed-off-by: Ian Rogers <[email protected]> Cc: Adrian Hunter <[email protected]> Cc: Jiri Olsa <[email protected]> Cc: Namhyung Kim <[email protected]> Cc: [email protected] Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2023-06-13perf srcline: Make sentinel reading for binutils addr2line more robustIan Rogers1-8/+53
The addr2line process is sent an address then multiple function, filename:line "records" are read. To detect the end of output a ',' is sent and for llvm-addr2line a ',' is then read back showing the end of addrline's output. For binutils addr2line the ',' translates to address 0 and we expect the bogus filename marker "??:0" (see filename_split) to be sent from addr2line. For some kernels address 0 may have a mapping and so a seemingly valid inline output is given and breaking the sentinel discovery: ``` $ addr2line -e vmlinux -f -i , __per_cpu_start ./arch/x86/kernel/cpu/common.c:1850 ``` To avoid this problem enable the address dumping for addr2line (the -a option). If an address of 0x0000000000000000 is read then this is the sentinel value working around the problem above. The filename_split still needs to check for "??:0" as bogus non-zero addresses also need handling. Reported-by: Changbin Du <[email protected]> Signed-off-by: Ian Rogers <[email protected]> Tested-by: Changbin Du <[email protected]> Cc: Adrian Hunter <[email protected]> Cc: Alexander Shishkin <[email protected]> Cc: Ingo Molnar <[email protected]> Cc: Jiri Olsa <[email protected]> Cc: Mark Rutland <[email protected]> Cc: Namhyung Kim <[email protected]> Cc: Nathan Chancellor <[email protected]> Cc: Nick Desaulniers <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: Tom Rix <[email protected]> Cc: [email protected] Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2023-06-13perf srcline: Make addr2line configuration failure more verboseIan Rogers1-13/+21
To aid debugging why it fails. Also, combine the loops for reading a line for the llvm/binutils cases. Signed-off-by: Ian Rogers <[email protected]> Tested-by: Changbin Du <[email protected]> Cc: Adrian Hunter <[email protected]> Cc: Alexander Shishkin <[email protected]> Cc: Ingo Molnar <[email protected]> Cc: Jiri Olsa <[email protected]> Cc: Mark Rutland <[email protected]> Cc: Namhyung Kim <[email protected]> Cc: Nathan Chancellor <[email protected]> Cc: Nick Desaulniers <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: Tom Rix <[email protected]> Cc: [email protected] Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2023-06-13perf tests: Make x86 new instructions test optional at build timeAdrian Hunter6-1/+20
The "x86 instruction decoder - new instructions" test takes up space but is only really useful to developers. Make it optional at build time. Add variable EXTRA_TESTS which must be defined in order to build perf with the test. Example: Before: $ make -C tools/perf clean >/dev/null $ make -C tools/perf >/dev/null Makefile.config:650: No libunwind found. Please install libunwind-dev[el] >= 1.1 and/or set LIBUNWIND_DIR Makefile.config:1149: libpfm4 not found, disables libpfm4 support. Please install libpfm4-dev PERF_VERSION = 6.4.rc3.gd15b8c76c964 $ readelf -SW tools/perf/perf | grep '\.rela.dyn\|.rodata\|\.data.rel.ro' [10] .rela.dyn RELA 000000000002fcb0 02fcb0 0748b0 18 A 6 0 8 [18] .rodata PROGBITS 00000000002eb000 2eb000 6bac00 00 A 0 0 32 [25] .data.rel.ro PROGBITS 00000000009ea180 9e9180 04b540 00 WA 0 0 32 After: $ make -C tools/perf clean >/dev/null $ make -C tools/perf >/dev/null Makefile.config:650: No libunwind found. Please install libunwind-dev[el] >= 1.1 and/or set LIBUNWIND_DIR Makefile.config:1154: libpfm4 not found, disables libpfm4 support. Please install libpfm4-dev PERF_VERSION = 6.4.rc3.g4ea9c1569ea4 $ readelf -SW tools/perf/perf | grep '\.rela.dyn\|.rodata\|\.data.rel.ro' [10] .rela.dyn RELA 000000000002f3c8 02f3c8 036d68 18 A 6 0 8 [18] .rodata PROGBITS 00000000002ac000 2ac000 68da80 00 A 0 0 32 [25] .data.rel.ro PROGBITS 000000000097d440 97c440 022280 00 WA 0 0 32 Committer notes: Build with 'make EXTRA_TESTS=1 -C tools/perf O=/tmp/build/perf" and reproduced the ELF section size differences. Signed-off-by: Adrian Hunter <[email protected]> Acked-by: Ian Rogers <[email protected]> Tested-by: Arnaldo Carvalho de Melo <[email protected]> Cc: Alexander Shishkin <[email protected]> Cc: Andi Kleen <[email protected]> Cc: Jiri Olsa <[email protected]> Cc: Mark Rutland <[email protected]> Cc: Namhyung Kim <[email protected]> Cc: Peter Zijlstra <[email protected]> Link: http://lore.kernel.org/lkml/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2023-06-13perf dwarf-aux: Allow unnamed struct/union/enumNamhyung Kim1-3/+5
It's possible some struct/union/enum type don't have type name. Allow the empty name after "struct"/"union"/"enum" string rather than fail. Signed-off-by: Namhyung Kim <[email protected]> Cc: Adrian Hunter <[email protected]> Cc: Ian Rogers <[email protected]> Cc: Ingo Molnar <[email protected]> Cc: Jiri Olsa <[email protected]> Cc: Masami Hiramatsu <[email protected]> Cc: Peter Zijlstra <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2023-06-13perf dwarf-aux: Fix off-by-one in die_get_varname()Namhyung Kim1-1/+1
The die_get_varname() returns "(unknown_type)" string if it failed to find a type for the variable. But it had a space before the opening parenthesis and it made the closing parenthesis cut off due to the off-by-one in the string length (14). Signed-off-by: Namhyung Kim <[email protected]> Fixes: 88fd633cdfa19060 ("perf probe: No need to use formatting strbuf method") Cc: Adrian Hunter <[email protected]> Cc: Ian Rogers <[email protected]> Cc: Ingo Molnar <[email protected]> Cc: Jiri Olsa <[email protected]> Cc: Masami Hiramatsu <[email protected]> Cc: Peter Zijlstra <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2023-06-13selftests/bpf: Verify that check_ids() is used for scalars in regsafe()Eduard Zingerman1-0/+315
Verify that the following example is rejected by verifier: r9 = ... some pointer with range X ... r6 = ... unbound scalar ID=a ... r7 = ... unbound scalar ID=b ... if (r6 > r7) goto +1 r7 = r6 if (r7 > X) goto exit r9 += r6 *(u64 *)r9 = Y Also add test cases to: - check that check_alu_op() for BPF_MOV instruction does not allocate scalar ID if source register is a constant; - check that unique scalar IDs are ignored when new verifier state is compared to cached verifier state; - check that two different scalar IDs in a verified state can't be mapped to the same scalar ID in current state. Signed-off-by: Eduard Zingerman <[email protected]> Signed-off-by: Andrii Nakryiko <[email protected]> Link: https://lore.kernel.org/bpf/[email protected]
2023-06-13selftests/bpf: Check if mark_chain_precision() follows scalar idsEduard Zingerman2-0/+346
Check __mark_chain_precision() log to verify that scalars with same IDs are marked as precise. Use several scenarios to test that precision marks are propagated through: - registers of scalar type with the same ID within one state; - registers of scalar type with the same ID cross several states; - registers of scalar type with the same ID cross several stack frames; - stack slot of scalar type with the same ID; - multiple scalar IDs are tracked independently. Signed-off-by: Eduard Zingerman <[email protected]> Signed-off-by: Andrii Nakryiko <[email protected]> Acked-by: Andrii Nakryiko <[email protected]> Link: https://lore.kernel.org/bpf/[email protected]
2023-06-13bpf: Use scalar ids in mark_chain_precision()Eduard Zingerman1-4/+4
Change mark_chain_precision() to track precision in situations like below: r2 = unknown value ... --- state #0 --- ... r1 = r2 // r1 and r2 now share the same ID ... --- state #1 {r1.id = A, r2.id = A} --- ... if (r2 > 10) goto exit; // find_equal_scalars() assigns range to r1 ... --- state #2 {r1.id = A, r2.id = A} --- r3 = r10 r3 += r1 // need to mark both r1 and r2 At the beginning of the processing of each state, ensure that if a register with a scalar ID is marked as precise, all registers sharing this ID are also marked as precise. This property would be used by a follow-up change in regsafe(). Signed-off-by: Eduard Zingerman <[email protected]> Signed-off-by: Andrii Nakryiko <[email protected]> Acked-by: Andrii Nakryiko <[email protected]> Link: https://lore.kernel.org/bpf/[email protected]
2023-06-13selftests/bpf: add a test for subprogram extablesKrister Johansen2-0/+80
In certain situations a program with subprograms may have a NULL extable entry. This should not happen, and when it does, it turns a single trap into multiple. Add a test case for further debugging and to prevent regressions. The test-case contains three essentially identical versions of the same test because just one program may not be sufficient to trigger the oops. This is due to the fact that the items are stored in a binary tree and have identical values so it's possible to sometimes find the ksym with the extable. With 3 copies, this has been reliable on this author's test systems. When triggered out of this test case, the oops looks like this: BUG: kernel NULL pointer dereference, address: 000000000000000c #PF: supervisor read access in kernel mode #PF: error_code(0x0000) - not-present page PGD 0 P4D 0 Oops: 0000 [#1] PREEMPT SMP NOPTI CPU: 0 PID: 1132 Comm: test_progs Tainted: G OE 6.4.0-rc3+ #2 RIP: 0010:cmp_ex_search+0xb/0x30 Code: cc cc cc cc e8 36 cb 03 00 66 0f 1f 44 00 00 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 f3 0f 1e fa 55 48 89 e5 48 8b 07 <48> 63 0e 48 01 f1 31 d2 48 39 c8 19 d2 48 39 c8 b8 01 00 00 00 0f RSP: 0018:ffffb30c4291f998 EFLAGS: 00010006 RAX: ffffffffc00b49da RBX: 0000000000000002 RCX: 000000000000000c RDX: 0000000000000002 RSI: 000000000000000c RDI: ffffb30c4291f9e8 RBP: ffffb30c4291f998 R08: ffffffffab1a42d0 R09: 0000000000000001 R10: 0000000000000000 R11: ffffffffab1a42d0 R12: ffffb30c4291f9e8 R13: 000000000000000c R14: 000000000000000c R15: 0000000000000000 FS: 00007fb5d9e044c0(0000) GS:ffff92e95ee00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 000000000000000c CR3: 000000010c3a2005 CR4: 00000000007706f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 PKRU: 55555554 Call Trace: <TASK> bsearch+0x41/0x90 ? __pfx_cmp_ex_search+0x10/0x10 ? bpf_prog_45a7907e7114d0ff_handle_fexit_ret_subprogs3+0x2a/0x6c search_extable+0x3b/0x60 ? bpf_prog_45a7907e7114d0ff_handle_fexit_ret_subprogs3+0x2a/0x6c search_bpf_extables+0x10d/0x190 ? bpf_prog_45a7907e7114d0ff_handle_fexit_ret_subprogs3+0x2a/0x6c search_exception_tables+0x5d/0x70 fixup_exception+0x3f/0x5b0 ? look_up_lock_class+0x61/0x110 ? __lock_acquire+0x6b8/0x3560 ? __lock_acquire+0x6b8/0x3560 ? __lock_acquire+0x6b8/0x3560 kernelmode_fixup_or_oops+0x46/0x110 __bad_area_nosemaphore+0x68/0x2b0 ? __lock_acquire+0x6b8/0x3560 bad_area_nosemaphore+0x16/0x20 do_kern_addr_fault+0x81/0xa0 exc_page_fault+0xd6/0x210 asm_exc_page_fault+0x2b/0x30 RIP: 0010:bpf_prog_45a7907e7114d0ff_handle_fexit_ret_subprogs3+0x2a/0x6c Code: f3 0f 1e fa 0f 1f 44 00 00 66 90 55 48 89 e5 f3 0f 1e fa 48 8b 7f 08 49 bb 00 00 00 00 00 80 00 00 4c 39 df 73 04 31 f6 eb 04 <48> 8b 77 00 49 bb 00 00 00 00 00 80 00 00 48 81 c7 7c 00 00 00 4c RSP: 0018:ffffb30c4291fcb8 EFLAGS: 00010282 RAX: 0000000000000001 RBX: 0000000000000001 RCX: 0000000000000000 RDX: 00000000cddf1af1 RSI: 000000005315a00d RDI: ffffffffffffffea RBP: ffffb30c4291fcb8 R08: ffff92e644bf38a8 R09: 0000000000000000 R10: 0000000000000000 R11: 0000800000000000 R12: ffff92e663652690 R13: 00000000000001c8 R14: 00000000000001c8 R15: 0000000000000003 bpf_trampoline_251255721842_2+0x63/0x1000 bpf_testmod_return_ptr+0x9/0xb0 [bpf_testmod] ? bpf_testmod_test_read+0x43/0x2d0 [bpf_testmod] sysfs_kf_bin_read+0x60/0x90 kernfs_fop_read_iter+0x143/0x250 vfs_read+0x240/0x2a0 ksys_read+0x70/0xe0 __x64_sys_read+0x1f/0x30 do_syscall_64+0x68/0xa0 ? syscall_exit_to_user_mode+0x77/0x1f0 ? do_syscall_64+0x77/0xa0 ? irqentry_exit+0x35/0xa0 ? sysvec_apic_timer_interrupt+0x4d/0x90 entry_SYSCALL_64_after_hwframe+0x72/0xdc RIP: 0033:0x7fb5da00a392 Code: ac 00 00 f7 d8 64 89 02 48 c7 c0 ff ff ff ff eb be 0f 1f 80 00 00 00 00 f3 0f 1e fa 64 8b 04 25 18 00 00 00 85 c0 75 10 0f 05 <48> 3d 00 f0 ff ff 77 56 c3 0f 1f 44 00 00 48 83 ec 28 48 89 54 24 RSP: 002b:00007ffc5b3cab68 EFLAGS: 00000246 ORIG_RAX: 0000000000000000 RAX: ffffffffffffffda RBX: 000055bee7b8b100 RCX: 00007fb5da00a392 RDX: 00000000000001c8 RSI: 0000000000000000 RDI: 0000000000000009 RBP: 00007ffc5b3caba0 R08: 0000000000000000 R09: 0000000000000037 R10: 000055bee7b8c2a7 R11: 0000000000000246 R12: 000055bee78f1f60 R13: 00007ffc5b3cae90 R14: 0000000000000000 R15: 0000000000000000 </TASK> Modules linked in: bpf_testmod(OE) nls_iso8859_1 dm_multipath scsi_dh_rdac scsi_dh_emc scsi_dh_alua intel_rapl_msr intel_rapl_common intel_uncore_frequency_common ppdev nfit crct10dif_pclmul crc32_pclmul psmouse ghash_clmulni_intel sha512_ssse3 aesni_intel parport_pc crypto_simd cryptd input_leds parport rapl ena i2c_piix4 mac_hid serio_raw ramoops reed_solomon pstore_blk drm pstore_zone efi_pstore autofs4 [last unloaded: bpf_testmod(OE)] CR2: 000000000000000c Though there may be some variation, depending on which suprogram triggers the bug. Signed-off-by: Krister Johansen <[email protected]> Acked-by: Yonghong Song <[email protected]> Link: https://lore.kernel.org/r/4ebf95ec857cd785b81db69f3e408c039ad8408b.1686616663.git.kjlx@templeofstupid.com Signed-off-by: Alexei Starovoitov <[email protected]>
2023-06-13KVM: selftests: Add new CFLAGS to generate dependency filesYu Zhang1-2/+15
Add "-MD" in CFLAGS to generate dependency files. Currently, each time a header file is updated in KVM selftest, we will have to run "make clean && make" to rebuild the whole test suite. By adding new compiling flags and dependent rules in Makefile, we do not need to make clean && make each time a header file is updated. Signed-off-by: Yu Zhang <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Sean Christopherson <[email protected]>
2023-06-13rtla/timerlat_hist: Add timerlat user-space supportDaniel Bristot de Oliveira1-11/+118
Add the support for running timerlat threads in user-space. In this mode, enabled with -u/--user-threads, timerlat dispatches user-space processes that will loop in the timerlat_fd, measuring the overhead for going to user-space and then returning to the kernel - in addition to the existing measurements. Here is one example of the tool's output with -u enabled: $ sudo timerlat hist -u -c 1-3 -d 600 # RTLA timerlat histogram # Time unit is microseconds (us) # Duration: 0 00:10:01 Index IRQ-001 Thr-001 Usr-001 IRQ-002 Thr-002 Usr-002 IRQ-003 Thr-003 Usr-003 0 477555 0 0 425287 0 0 474357 0 0 1 122385 7998 0 174616 1921 0 125412 3138 0 2 47 587376 492150 89 594717 447830 147 593463 454872 3 11 2549 101930 7 2682 145580 64 2530 138680 4 3 1954 2833 1 463 4917 11 548 4656 5 0 60 1037 0 138 1117 6 179 1130 6 0 26 1837 0 38 277 1 76 339 7 0 15 143 0 28 147 2 37 156 8 0 10 23 0 11 75 0 12 80 9 0 7 17 0 0 26 0 11 42 10 0 2 11 0 0 18 0 2 20 11 0 0 7 0 1 8 0 2 12 12 0 0 6 0 1 4 0 2 8 13 0 1 3 0 0 0 0 0 1 14 0 1 0 0 0 1 0 0 2 15 0 1 0 0 0 0 0 0 2 16 0 1 2 0 0 0 0 0 0 17 0 0 1 0 0 0 0 0 0 19 0 0 1 0 0 0 0 0 0 over: 0 0 0 0 0 0 0 0 0 count: 600001 600001 600001 600000 600000 600000 600000 600000 600000 min: 0 1 2 0 1 2 0 1 2 avg: 0 1 2 0 2 2 0 2 2 max: 4 16 19 4 12 14 7 12 15 The tuning setup like -p or -C work for the user-space threads as well. Link: https://lkml.kernel.org/r/b6a042d55003c4a67ff7dce28d96044b7044f00d.1686066600.git.bristot@kernel.org Cc: William White <[email protected]> Cc: Jonathan Corbet <[email protected]> Tested-by: Juri Lelli <[email protected]> Signed-off-by: Daniel Bristot de Oliveira <[email protected]> Signed-off-by: Steven Rostedt (Google) <[email protected]>
2023-06-13rtla/timerlat_top: Add timerlat user-space supportDaniel Bristot de Oliveira7-6/+474
Add the support for running timerlat threads in user-space. In this mode, enabled with -u/--user-threads, timerlat dispatches user-space processes that will loop in the timerlat_fd, measuring the overhead for going to user-space and then returning to the kernel - in addition to the existing measurements. Here is one example of the tool's output with -u enabled: $ sudo timerlat top -u -d 600 -q Timer Latency 0 00:10:01 | IRQ Timer Latency (us) | Thread Timer Latency (us) | Ret user Timer Latency (us) CPU COUNT | cur min avg max | cur min avg max | cur min avg max 0 #600001 | 0 0 0 3 | 2 1 2 9 | 3 2 3 15 1 #600001 | 0 0 0 2 | 2 1 2 13 | 2 2 3 18 2 #600001 | 0 0 0 10 | 2 1 2 16 | 3 2 3 20 3 #600001 | 0 0 0 7 | 2 1 2 10 | 3 2 3 11 4 #600000 | 0 0 0 16 | 2 1 2 41 | 3 2 3 58 5 #600000 | 0 0 0 3 | 2 1 2 10 | 3 2 3 13 6 #600000 | 0 0 0 5 | 2 1 2 7 | 3 2 3 10 7 #600000 | 0 0 0 1 | 2 1 2 7 | 3 2 3 10 The tuning setup like -p or -C work for the user-space threads as well. Link: https://lkml.kernel.org/r/758ad2292a0a1d884138d08219e1a0f572d257a2.1686066600.git.bristot@kernel.org Cc: William White <[email protected]> Cc: Jonathan Corbet <[email protected]> Tested-by: Juri Lelli <[email protected]> Signed-off-by: Daniel Bristot de Oliveira <[email protected]> Signed-off-by: Steven Rostedt (Google) <[email protected]>
2023-06-13rtla/hwnoise: Reduce runtime to 75%Daniel Bristot de Oliveira1-1/+7
osnoise runs 100% of time by default. It makes sense because osnoise is preemptive. hwnoise checks preemption once a second, so it reduces system progress. Reduce runtime to 75% to avoid problems by default. I added a Fixes as it might avoid problems for first time users as it lands on distros. Link: https://lkml.kernel.org/r/af0b7113ffc00031b9af4bb40ef5889a27dadf8c.1686066600.git.bristot@kernel.org Cc: William White <[email protected]> Cc: Jonathan Corbet <[email protected]> Tested-by: Juri Lelli <[email protected]> Fixes: 1f428356c38d ("rtla: Add hwnoise tool") Signed-off-by: Daniel Bristot de Oliveira <[email protected]> Signed-off-by: Steven Rostedt (Google) <[email protected]>
2023-06-13rtla: Start the tracers after creating all instancesDaniel Bristot de Oliveira4-17/+46
Group all start tracing after finishing creating all instances. The tracing instance starts first for the case of hitting a stop tracing while enabling other instances. The trace instance is the one with most valuable information. Link: https://lkml.kernel.org/r/67da7a703a56f75d7cd46568525145a65501a7e8.1686066600.git.bristot@kernel.org Cc: William White <[email protected]> Cc: Jonathan Corbet <[email protected]> Tested-by: Juri Lelli <[email protected]> Signed-off-by: Daniel Bristot de Oliveira <[email protected]> Signed-off-by: Steven Rostedt (Google) <[email protected]>
Powered by cgit, Gruvboxed by Blaster4385.