aboutsummaryrefslogtreecommitdiff
path: root/tools
AgeCommit message (Collapse)AuthorFilesLines
2022-09-21selftests/bpf: Add test for bpf_verify_pkcs7_signature() kfuncRoberto Sassu7-8/+610
Perform several tests to ensure the correct implementation of the bpf_verify_pkcs7_signature() kfunc. Do the tests with data signed with a generated testing key (by using sign-file from scripts/) and with the tcp_bic.ko kernel module if it is found in the system. The test does not fail if tcp_bic.ko is not found. First, perform an unsuccessful signature verification without data. Second, perform a successful signature verification with the session keyring and a new one created for testing. Then, ensure that permission and validation checks are done properly on the keyring provided to bpf_verify_pkcs7_signature(), despite those checks were deferred at the time the keyring was retrieved with bpf_lookup_user_key(). The tests expect to encounter an error if the Search permission is removed from the keyring, or the keyring is expired. Finally, perform a successful and unsuccessful signature verification with the keyrings with pre-determined IDs (the last test fails because the key is not in the platform keyring). The test is currently in the deny list for s390x (JIT does not support calling kernel function). Signed-off-by: Roberto Sassu <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Alexei Starovoitov <[email protected]>
2022-09-21selftests/bpf: Add additional tests for bpf_lookup_*_key()Roberto Sassu3-0/+159
Add a test to ensure that bpf_lookup_user_key() creates a referenced special keyring when the KEY_LOOKUP_CREATE flag is passed to this function. Ensure that the kfunc rejects invalid flags. Ensure that a keyring can be obtained from bpf_lookup_system_key() when one of the pre-determined keyring IDs is provided. The test is currently blacklisted for s390x (JIT does not support calling kernel function). Signed-off-by: Roberto Sassu <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Alexei Starovoitov <[email protected]>
2022-09-21selftests/bpf: Add verifier tests for bpf_lookup_*_key() and bpf_key_put()Roberto Sassu3-1/+142
Add verifier tests for bpf_lookup_*_key() and bpf_key_put(), to ensure that acquired key references stored in the bpf_key structure are released, that a non-NULL bpf_key pointer is passed to bpf_key_put(), and that key references are not leaked. Also, slightly modify test_verifier.c, to find the BTF ID of the attach point for the LSM program type (currently, it is done only for TRACING). Signed-off-by: Roberto Sassu <[email protected]> Acked-by: Kumar Kartikeya Dwivedi <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Alexei Starovoitov <[email protected]>
2022-09-21selftests/bpf: Compile kernel with everything as built-inRoberto Sassu2-14/+14
Since the eBPF CI does not support kernel modules, change the kernel config to compile everything as built-in. Signed-off-by: Roberto Sassu <[email protected]> Acked-by: Daniel Müller <[email protected]> Acked-by: Kumar Kartikeya Dwivedi <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Alexei Starovoitov <[email protected]>
2022-09-21bpf: Move dynptr type check to is_dynptr_type_expected()Roberto Sassu1-1/+1
Move dynptr type check to is_dynptr_type_expected() from is_dynptr_reg_valid_init(), so that callers can better determine the cause of a negative result (dynamic pointer not valid/initialized, dynamic pointer of the wrong type). It will be useful for example for BTF, to restrict which dynamic pointer types can be passed to kfuncs, as initially only the local type will be supported. Also, splitting makes the code more readable, since checking the dynamic pointer type is not necessarily related to validity and initialization. Split the validity/initialization and dynamic pointer type check also in the verifier, and adjust the expected error message in the test (a test for an unexpected dynptr type passed to a helper cannot be added due to missing suitable helpers, but this case has been tested manually). Cc: Joanne Koong <[email protected]> Cc: Kumar Kartikeya Dwivedi <[email protected]> Signed-off-by: Roberto Sassu <[email protected]> Acked-by: Kumar Kartikeya Dwivedi <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Alexei Starovoitov <[email protected]>
2022-09-21libbpf: Support raw BTF placed in the default search pathTao Chen1-18/+12
Currently, the default vmlinux files at '/boot/vmlinux-*', '/lib/modules/*/vmlinux-*' etc. are parsed with 'btf__parse_elf()' to extract BTF. It is possible that these files are actually raw BTF files similar to /sys/kernel/btf/vmlinux. So parse these files with 'btf__parse' which tries both raw format and ELF format. This might be useful in some scenarios where users put their custom BTF into known locations and don't want to specify btf_custom_path option. Signed-off-by: Tao Chen <[email protected]> Signed-off-by: Andrii Nakryiko <[email protected]> Acked-by: Yonghong Song <[email protected]> Link: https://lore.kernel.org/bpf/3f59fb5a345d2e4f10e16fe9e35fbc4c03ecaa3e.1662999860.git.chentao.kernel@linux.alibaba.com
2022-09-21selftests: bpf: test_kmod.sh: Pass parameters to the moduleYauheni Kaliuta1-3/+8
It's possible to specify particular tests for test_bpf.ko with module parameters. Make it possible to pass the module parameters, example: test_kmod.sh test_range=1,3 Since magnitude tests take long time it can be reasonable to skip them. Signed-off-by: Yauheni Kaliuta <[email protected]> Signed-off-by: Andrii Nakryiko <[email protected]> Link: https://lore.kernel.org/bpf/[email protected]
2022-09-21libbpf: Improve BPF_PROG2 macro code quality and descriptionYonghong Song1-63/+91
Commit 34586d29f8df ("libbpf: Add new BPF_PROG2 macro") added BPF_PROG2 macro for trampoline based programs with struct arguments. Andrii made a few suggestions to improve code quality and description. This patch implemented these suggestions including better internal macro name, consistent usage pattern for __builtin_choose_expr(), simpler macro definition for always-inline func arguments and better macro description. Signed-off-by: Yonghong Song <[email protected]> Signed-off-by: Andrii Nakryiko <[email protected]> Acked-by: Stanislav Fomichev <[email protected]> Link: https://lore.kernel.org/bpf/[email protected]
2022-09-21selftests/bpf: Add selftests validating the user ringbufDavid Vernet5-0/+1185
This change includes selftests that validate the expected behavior and APIs of the new BPF_MAP_TYPE_USER_RINGBUF map type. Signed-off-by: David Vernet <[email protected]> Signed-off-by: Andrii Nakryiko <[email protected]> Link: https://lore.kernel.org/bpf/[email protected]
2022-09-21bpf: Add libbpf logic for user-space ring bufferDavid Vernet6-3/+398
Now that all of the logic is in place in the kernel to support user-space produced ring buffers, we can add the user-space logic to libbpf. This patch therefore adds the following public symbols to libbpf: struct user_ring_buffer * user_ring_buffer__new(int map_fd, const struct user_ring_buffer_opts *opts); void *user_ring_buffer__reserve(struct user_ring_buffer *rb, __u32 size); void *user_ring_buffer__reserve_blocking(struct user_ring_buffer *rb, __u32 size, int timeout_ms); void user_ring_buffer__submit(struct user_ring_buffer *rb, void *sample); void user_ring_buffer__discard(struct user_ring_buffer *rb, void user_ring_buffer__free(struct user_ring_buffer *rb); A user-space producer must first create a struct user_ring_buffer * object with user_ring_buffer__new(), and can then reserve samples in the ring buffer using one of the following two symbols: void *user_ring_buffer__reserve(struct user_ring_buffer *rb, __u32 size); void *user_ring_buffer__reserve_blocking(struct user_ring_buffer *rb, __u32 size, int timeout_ms); With user_ring_buffer__reserve(), a pointer to a 'size' region of the ring buffer will be returned if sufficient space is available in the buffer. user_ring_buffer__reserve_blocking() provides similar semantics, but will block for up to 'timeout_ms' in epoll_wait if there is insufficient space in the buffer. This function has the guarantee from the kernel that it will receive at least one event-notification per invocation to bpf_ringbuf_drain(), provided that at least one sample is drained, and the BPF program did not pass the BPF_RB_NO_WAKEUP flag to bpf_ringbuf_drain(). Once a sample is reserved, it must either be committed to the ring buffer with user_ring_buffer__submit(), or discarded with user_ring_buffer__discard(). Signed-off-by: David Vernet <[email protected]> Signed-off-by: Andrii Nakryiko <[email protected]> Link: https://lore.kernel.org/bpf/[email protected]
2022-09-21bpf: Add bpf_user_ringbuf_drain() helperDavid Vernet1-0/+38
In a prior change, we added a new BPF_MAP_TYPE_USER_RINGBUF map type which will allow user-space applications to publish messages to a ring buffer that is consumed by a BPF program in kernel-space. In order for this map-type to be useful, it will require a BPF helper function that BPF programs can invoke to drain samples from the ring buffer, and invoke callbacks on those samples. This change adds that capability via a new BPF helper function: bpf_user_ringbuf_drain(struct bpf_map *map, void *callback_fn, void *ctx, u64 flags) BPF programs may invoke this function to run callback_fn() on a series of samples in the ring buffer. callback_fn() has the following signature: long callback_fn(struct bpf_dynptr *dynptr, void *context); Samples are provided to the callback in the form of struct bpf_dynptr *'s, which the program can read using BPF helper functions for querying struct bpf_dynptr's. In order to support bpf_ringbuf_drain(), a new PTR_TO_DYNPTR register type is added to the verifier to reflect a dynptr that was allocated by a helper function and passed to a BPF program. Unlike PTR_TO_STACK dynptrs which are allocated on the stack by a BPF program, PTR_TO_DYNPTR dynptrs need not use reference tracking, as the BPF helper is trusted to properly free the dynptr before returning. The verifier currently only supports PTR_TO_DYNPTR registers that are also DYNPTR_TYPE_LOCAL. Note that while the corresponding user-space libbpf logic will be added in a subsequent patch, this patch does contain an implementation of the .map_poll() callback for BPF_MAP_TYPE_USER_RINGBUF maps. This .map_poll() callback guarantees that an epoll-waiting user-space producer will receive at least one event notification whenever at least one sample is drained in an invocation of bpf_user_ringbuf_drain(), provided that the function is not invoked with the BPF_RB_NO_WAKEUP flag. If the BPF_RB_FORCE_WAKEUP flag is provided, a wakeup notification is sent even if no sample was drained. Signed-off-by: David Vernet <[email protected]> Signed-off-by: Andrii Nakryiko <[email protected]> Link: https://lore.kernel.org/bpf/[email protected]
2022-09-21bpf: Define new BPF_MAP_TYPE_USER_RINGBUF map typeDavid Vernet4-2/+4
We want to support a ringbuf map type where samples are published from user-space, to be consumed by BPF programs. BPF currently supports a kernel -> user-space circular ring buffer via the BPF_MAP_TYPE_RINGBUF map type. We'll need to define a new map type for user-space -> kernel, as none of the helpers exported for BPF_MAP_TYPE_RINGBUF will apply to a user-space producer ring buffer, and we'll want to add one or more helper functions that would not apply for a kernel-producer ring buffer. This patch therefore adds a new BPF_MAP_TYPE_USER_RINGBUF map type definition. The map type is useless in its current form, as there is no way to access or use it for anything until we one or more BPF helpers. A follow-on patch will therefore add a new helper function that allows BPF programs to run callbacks on samples that are published to the ring buffer. Signed-off-by: David Vernet <[email protected]> Signed-off-by: Andrii Nakryiko <[email protected]> Acked-by: Andrii Nakryiko <[email protected]> Link: https://lore.kernel.org/bpf/[email protected]
2022-09-21tools: sync find_bit() implementationYury Norov2-129/+81
Sync find_first_bit() and find_next_bit() implementation with the mother kernel. Also, drop unused find_last_bit() and find_next_clump8(). Signed-off-by: Yury Norov <[email protected]>
2022-09-21perf tools: Honor namespace when synthesizing build-idsNamhyung Kim1-3/+14
It needs to enter the namespace before reading a file. Fixes: 4183a8d70a288627 ("perf tools: Allow synthesizing the build id for kernel/modules/tasks in PERF_RECORD_MMAP2") Signed-off-by: Namhyung Kim <[email protected]> Cc: Adrian Hunter <[email protected]> Cc: Ian Rogers <[email protected]> Cc: Jiri Olsa <[email protected]> Cc: Peter Zijlstra <[email protected]> Link: http://lore.kernel.org/lkml/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2022-09-21tools headers cpufeatures: Sync with the kernel sourcesArnaldo Carvalho de Melo1-2/+3
To pick the changes from: 7df548840c496b01 ("x86/bugs: Add "unknown" reporting for MMIO Stale Data") This only causes these perf files to be rebuilt: CC /tmp/build/perf/bench/mem-memcpy-x86-64-asm.o CC /tmp/build/perf/bench/mem-memset-x86-64-asm.o And addresses this perf build warning: Warning: Kernel ABI header at 'tools/arch/x86/include/asm/cpufeatures.h' differs from latest version at 'arch/x86/include/asm/cpufeatures.h' diff -u tools/arch/x86/include/asm/cpufeatures.h arch/x86/include/asm/cpufeatures.h Cc: Adrian Hunter <[email protected]> Cc: Borislav Petkov <[email protected]> Cc: Ian Rogers <[email protected]> Cc: Jiri Olsa <[email protected]> Cc: Namhyung Kim <[email protected]> Cc: Pawan Gupta <[email protected]> Link: https://lore.kernel.org/lkml/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2022-09-21perf kcore_copy: Do not check /proc/modules is unchangedAdrian Hunter1-5/+2
/proc/kallsyms and /proc/modules are compared before and after the copy in order to ensure no changes during the copy. However /proc/modules also might change due to reference counts changing even though that does not make any difference. Any modules loaded or unloaded should be visible in changes to kallsyms, so it is not necessary to check /proc/modules also anyway. Remove the comparison checking that /proc/modules is unchanged. Fixes: fc1b691d7651d949 ("perf buildid-cache: Add ability to add kcore to the cache") Reported-by: Daniel Dao <[email protected]> Signed-off-by: Adrian Hunter <[email protected]> Tested-by: Daniel Dao <[email protected]> Acked-by: Namhyung Kim <[email protected]> Cc: Ian Rogers <[email protected]> Cc: Jiri Olsa <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2022-09-21libperf evlist: Fix polling of system-wide eventsAdrian Hunter1-2/+3
Originally, (refer commit f90d194a867a5a1d ("perf evlist: Do not poll events that use the system_wide flag") there wasn't much reason to poll system-wide events because: 1. The mmaps get "merged" via set-output anyway (the per-cpu case) 2. perf reads all mmaps when any event is woken 3. system-wide mmaps do not fill up as fast as the mmaps for user selected events But there was 1 reason not to poll which was that it prevented correct termination due to POLLHUP on all user selected events. That issue is now easily resolved by using fdarray_flag__nonfilterable. With the advent of commit ae4f8ae16a078964 ("libperf evlist: Allow mixing per-thread and per-cpu mmaps"), system-wide mmaps can be used also in the per-thread case where reason 1 does not apply. Fix the omission of system-wide events from polling by using the fdarray_flag__nonfilterable flag. Example: Before: $ perf record --no-bpf-event -vvv -e intel_pt// --per-thread uname 2>err.txt Linux $ grep 'sys_perf_event_open.*=\|pollfd' err.txt sys_perf_event_open: pid 155076 cpu -1 group_fd -1 flags 0x8 = 5 sys_perf_event_open: pid 155076 cpu -1 group_fd -1 flags 0x8 = 6 sys_perf_event_open: pid -1 cpu 0 group_fd -1 flags 0x8 = 7 sys_perf_event_open: pid -1 cpu 1 group_fd -1 flags 0x8 = 9 sys_perf_event_open: pid -1 cpu 2 group_fd -1 flags 0x8 = 10 sys_perf_event_open: pid -1 cpu 3 group_fd -1 flags 0x8 = 11 sys_perf_event_open: pid -1 cpu 4 group_fd -1 flags 0x8 = 12 sys_perf_event_open: pid -1 cpu 5 group_fd -1 flags 0x8 = 13 sys_perf_event_open: pid -1 cpu 6 group_fd -1 flags 0x8 = 14 sys_perf_event_open: pid -1 cpu 7 group_fd -1 flags 0x8 = 15 thread_data[0x55fb43c29e80]: pollfd[0] <- event_fd=5 thread_data[0x55fb43c29e80]: pollfd[1] <- event_fd=6 thread_data[0x55fb43c29e80]: pollfd[2] <- non_perf_event fd=4 After: $ perf record --no-bpf-event -vvv -e intel_pt// --per-thread uname 2>err.txt Linux $ grep 'sys_perf_event_open.*=\|pollfd' err.txt sys_perf_event_open: pid 156316 cpu -1 group_fd -1 flags 0x8 = 5 sys_perf_event_open: pid 156316 cpu -1 group_fd -1 flags 0x8 = 6 sys_perf_event_open: pid -1 cpu 0 group_fd -1 flags 0x8 = 7 sys_perf_event_open: pid -1 cpu 1 group_fd -1 flags 0x8 = 9 sys_perf_event_open: pid -1 cpu 2 group_fd -1 flags 0x8 = 10 sys_perf_event_open: pid -1 cpu 3 group_fd -1 flags 0x8 = 11 sys_perf_event_open: pid -1 cpu 4 group_fd -1 flags 0x8 = 12 sys_perf_event_open: pid -1 cpu 5 group_fd -1 flags 0x8 = 13 sys_perf_event_open: pid -1 cpu 6 group_fd -1 flags 0x8 = 14 sys_perf_event_open: pid -1 cpu 7 group_fd -1 flags 0x8 = 15 thread_data[0x55cc19e58e80]: pollfd[0] <- event_fd=5 thread_data[0x55cc19e58e80]: pollfd[1] <- event_fd=6 thread_data[0x55cc19e58e80]: pollfd[2] <- event_fd=7 thread_data[0x55cc19e58e80]: pollfd[3] <- event_fd=9 thread_data[0x55cc19e58e80]: pollfd[4] <- event_fd=10 thread_data[0x55cc19e58e80]: pollfd[5] <- event_fd=11 thread_data[0x55cc19e58e80]: pollfd[6] <- event_fd=12 thread_data[0x55cc19e58e80]: pollfd[7] <- event_fd=13 thread_data[0x55cc19e58e80]: pollfd[8] <- event_fd=14 thread_data[0x55cc19e58e80]: pollfd[9] <- event_fd=15 thread_data[0x55cc19e58e80]: pollfd[10] <- non_perf_event fd=4 Fixes: ae4f8ae16a078964 ("libperf evlist: Allow mixing per-thread and per-cpu mmaps") Signed-off-by: Adrian Hunter <[email protected]> Acked-by: Namhyung Kim <[email protected]> Cc: Ian Rogers <[email protected]> Cc: Jiri Olsa <[email protected]> Cc: [email protected] Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2022-09-21perf record: Fix cpu mask bit setting for mixed mmapsAdrian Hunter1-0/+2
With mixed per-thread and (system-wide) per-cpu maps, the "any cpu" value -1 must be skipped when setting CPU mask bits. Prior to commit cbd7bfc7fd99acdd ("tools/perf: Fix out of bound access to cpu mask array") the invalid setting went unnoticed, but since then it causes perf record to fail with an error. Example: Before: $ perf record -e intel_pt// --per-thread uname Failed to initialize parallel data streaming masks After: $ perf record -e intel_pt// --per-thread uname Linux [ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 0.068 MB perf.data ] Fixes: ae4f8ae16a078964 ("libperf evlist: Allow mixing per-thread and per-cpu mmaps") Signed-off-by: Adrian Hunter <[email protected]> Acked-by: Namhyung Kim <[email protected]> Cc: Athira Rajeev <[email protected]> Cc: Ian Rogers <[email protected]> Cc: Jiri Olsa <[email protected]> Cc: [email protected] Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2022-09-21perf test: Skip wp modify test on old kernelsNamhyung Kim1-2/+8
It uses PERF_EVENT_IOC_MODIFY_ATTRIBUTES ioctl. The kernel would return ENOTTY if it's not supported. Update the skip reason in that case. Committer notes: On s/390 the args aren't used, so need to be marked __maybe_unused. Reviewed-by: Ravi Bangoria <[email protected]> Signed-off-by: Namhyung Kim <[email protected]> Cc: Adrian Hunter <[email protected]> Cc: Ian Rogers <[email protected]> Cc: Ingo Molnar <[email protected]> Cc: Jiri Olsa <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: Ravi Bangoria <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2022-09-21selftests/bpf: Adapt cgroup effective query uapi changePu Lehui1-7/+4
The attach flags is meaningless for effective query and its value will always be set as 0 during effective query. Root cg's effective progs is always its attached progs, so we use non-effective query to get its progs count and attach flags. And we don't need the remain attach flags check. Fixes: b79c9fc9551b ("bpf: implement BPF_PROG_QUERY for BPF_LSM_CGROUP") Signed-off-by: Pu Lehui <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Martin KaFai Lau <[email protected]>
2022-09-21bpftool: Fix wrong cgroup attach flags being assigned to effective progsPu Lehui1-5/+49
When root-cgroup attach multi progs and sub-cgroup attach a override prog, bpftool will display incorrectly for the attach flags of the sub-cgroup’s effective progs: $ bpftool cgroup tree /sys/fs/cgroup effective CgroupPath ID AttachType AttachFlags Name /sys/fs/cgroup 6 cgroup_sysctl multi sysctl_tcp_mem 13 cgroup_sysctl multi sysctl_tcp_mem /sys/fs/cgroup/cg1 20 cgroup_sysctl override sysctl_tcp_mem 6 cgroup_sysctl override sysctl_tcp_mem <- wrong 13 cgroup_sysctl override sysctl_tcp_mem <- wrong /sys/fs/cgroup/cg1/cg2 20 cgroup_sysctl sysctl_tcp_mem 6 cgroup_sysctl sysctl_tcp_mem 13 cgroup_sysctl sysctl_tcp_mem Attach flags is only valid for attached progs of this layer cgroup, but not for effective progs. For querying with EFFECTIVE flags, exporting attach flags does not make sense. So let's remove the AttachFlags field and the associated logic. After this patch, the above effective cgroup tree will show as bellow: $ bpftool cgroup tree /sys/fs/cgroup effective CgroupPath ID AttachType Name /sys/fs/cgroup 6 cgroup_sysctl sysctl_tcp_mem 13 cgroup_sysctl sysctl_tcp_mem /sys/fs/cgroup/cg1 20 cgroup_sysctl sysctl_tcp_mem 6 cgroup_sysctl sysctl_tcp_mem 13 cgroup_sysctl sysctl_tcp_mem /sys/fs/cgroup/cg1/cg2 20 cgroup_sysctl sysctl_tcp_mem 6 cgroup_sysctl sysctl_tcp_mem 13 cgroup_sysctl sysctl_tcp_mem Fixes: b79c9fc9551b ("bpf: implement BPF_PROG_QUERY for BPF_LSM_CGROUP") Fixes: a98bf57391a2 ("tools: bpftool: add support for reporting the effective cgroup progs") Signed-off-by: Pu Lehui <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Martin KaFai Lau <[email protected]>
2022-09-21bpf, cgroup: Reject prog_attach_flags array when effective queryPu Lehui1-2/+5
Attach flags is only valid for attached progs of this layer cgroup, but not for effective progs. For querying with EFFECTIVE flags, exporting attach flags does not make sense. So when effective query, we reject prog_attach_flags array and don't need to populate it. Also we limit attach_flags to output 0 during effective query. Fixes: b79c9fc9551b ("bpf: implement BPF_PROG_QUERY for BPF_LSM_CGROUP") Signed-off-by: Pu Lehui <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Martin KaFai Lau <[email protected]>
2022-09-21iio: event_monitor: add pitch, yaw and roll modifiersAndrea Merello1-0/+3
Following the introduction of pitch, yaw and roll IIO modifiers, update the event_monitor tool accordingly. Signed-off-by: Andrea Merello <[email protected]> Reviewed-by: Andy Shevchenko <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jonathan Cameron <[email protected]>
2022-09-21iio: event_monitor: add linear acceleration modifiersAndrea Merello1-0/+3
Following the introduction of IIO linear acceleration modifiers, update the event_monitor tool accordingly. Signed-off-by: Andrea Merello <[email protected]> Reviewed-by: Andy Shevchenko <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jonathan Cameron <[email protected]>
2022-09-21kselftest/arm64: Add coverage of TPIDR2_EL0 ptrace interfaceMark Brown1-3/+79
Extend the ptrace test support for NT_ARM_TLS to cover TPIDR2_EL0 - on systems that support SME the NT_ARM_TLS regset can be up to 2 elements long with the second element containing TPIDR2_EL0. On systems supporting SME we verify that this value can be read and written while on systems that do not support SME we verify correct truncation of reads and writes. Signed-off-by: Mark Brown <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Catalin Marinas <[email protected]>
2022-09-21kselftest/arm64: Add test coverage for NT_ARM_TLSMark Brown3-1/+167
In preparation for extending support for NT_ARM_TLS to cover additional TPIDRs add some tests for the existing interface. Do this in a generic ptrace test program to provide a place to collect additional tests in the future. Signed-off-by: Mark Brown <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Catalin Marinas <[email protected]>
2022-09-21Merge tag 'iio-for-6.1a' of ↵Greg Kroah-Hartman1-1/+7
https://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into char-misc-next Jonathan writes: 1st set of IIO new device support, features and cleanup for 6.1 This includes Nuno Sa's work to move the IIO core over to generic firmware properties rather than having DT specific code paths. Combined with Andy Shevchenko's long term work on drivers, this leaves IIO in a good state for handling other firmware types. New device support - liteon,ltrf216a * New driver and dt bindings to support this Light sensor. - maxim,max11205 * New driver for this 16bit single channel ADC. - memsensing,msa311 * New driver for this accelerometer. Includes a string helper for read/write. - richtek,rtq6056 * New driver and dt binding to support this current monitor used to measure power usage. - yamaha,yas530 * Support the YAS537 variant (series includes several fixes for other parts and new driver features). Staging graduation - adi,ad7746 CDC. Cleanup conducted against set of roadtest tests using the posted RFC of that framework. Features - core * Large rework to make all the core IIO code use generic firmware properties. Includes switching some drivers over as well using newly provided generic interfaces and allowing removal of DT specific ones. * Support for gesture event types for single and double tap. Used in bosch,bma400. - atmel,at91-sama5d2 * Add support for temperature sensor which uses two muxed inputs to estimate the temperature. * Handle trackx bits of EMR register to improve temp sampling accuracy. * Runtime PM support. - liteon,ltrf216a * Add a _raw channel output to allow working around an issue with differing conversions equations that breaks some user space controls. - mexelis,mlx90632 * Support regulator control. - ti,tsc2046 * External reference voltage support. Clean up and minor fixes - Tree-wide * devm_clk_get_enabled() replacements of opencoded equivalent. * Remaining IIO_DMA_MINALIGN conversions (the staging/iio drivers). * Various minor warning and similar cleanup such as missing static markings. * strlcpy() to strscpy() for cases where return value not checked. * provide units.h entries for more HZ units and use them in drivers. - dt-bindings cleanup * Drop maintainers listss where the email address is bouncing. * Switch spi devices over to using spi-peripheral.yaml * Add some missing unevaluatedProperties / additionalProperties: false entries. - ABI docs * Add some missing channel type specific sampling frequency entries. * Add parameter names for callback parameters. - MAINTAINERS * Fix wrong ADI forum links. - core * lockdep class per device, to avoid an issue with nest when one IIO device is the consumer of another. * White space tweaks. - asc,dlhl60d * Use get_unaligned_be24 to avoid some unusual data manipulation and masking. - atmel,at91-sama5d2 * Fix wrong max value. * Improve error handling when measuring pressure and touch. * Add locks to remove races on updating oversampling / sampling freq. * Add missing calls in suspend and resume path to ensure state is correctly brought up if buffered capture was in use when suspend happened. * Error out of write_raw() callback if buffered capture enabled to avoid unpredictable behavior. * Handle different versions having different oversampling ratio support and drop excess error checking. * Cleanup magic value defines where the name is just the value and hence hurts readability. * Use read_avail() callback to provide info on possible oversampling ratios. * Correctly handle variable bit depth when doing oversampling on different supported parts. Also handle higher oversampling ratios. - fsl,imx8qxp * Don't ignore errors from regulator_get_voltage() so as to avoid some very surprising scaling. - invensense,icp10100 * Switch from UNIVERSAL to DEFINE_RUNTIME_DEV_PM_OPS. UNIVERSAL rarely made sense and is now deprecated. In this driver we just avoid double disabling in some paths. - maxim,max1363 * Drop consumer channel map provision by platform data. There have been better ways of doing this for years and there are no in tree users. - microchip,mcp3911 * Update status to maintained. - qcom,spmi-adc5 * Support measurement of LDO output voltage. - qcom,spmi-adc * Add missing channel available on SM6125 SoC. - st,stmpe * Drop requirement on node name in binding now that driver correctly doesn't enforce it. - stx104 * Move to more appropriate addac directory - ti,am335x * Document ti,am654-adc compatible already in use in tree. - ti,hmc5843 * Move dev_pm_ops out of header and use new pm macros to handle export. - yamaha,yas530 * Minor cleanups. * tag 'iio-for-6.1a' of https://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio: (142 commits) iio: pressure: icp10100: Switch from UNIVERSAL to DEFINE_RUNTIME_DEV_PM_OPS(). iio: adc: max1363: Drop provision to provide an IIO channel map via platform data iio: accel: bma400: Add support for single and double tap events iio: Add new event type gesture and use direction for single and double tap iio: Use per-device lockdep class for mlock iio: adc: add max11205 adc driver dt-bindings: iio: adc: Add max11205 documentation file iio: magnetometer: yamaha-yas530: Use dev_err_probe() iio: magnetometer: yamaha-yas530: Make strings const in chip info iio: magnetometer: yamaha-yas530: Use pointers as driver data iio: adc: tsc2046: silent spi_device_id warning iio: adc: tsc2046: add vref support dt-bindings: iio: adc: ti,tsc2046: add vref-supply property iio: light: ltrf216a: Add raw attribute dt-bindings: iio: Add missing (unevaluated|additional)Properties on child nodes MAINTAINERS: fix Analog Devices forum links iio/accel: fix repeated words in comments dt-bindings: iio: accel: add dt-binding schema for msa311 accel driver iio: add MEMSensing MSA311 3-axis accelerometer driver dt-bindings: vendor-prefixes: add MEMSensing Microsystems Co., Ltd. ...
2022-09-21perf jit: Include program header in ELF filesLieven Hey2-0/+18
The missing header makes it hard for programs like elfutils to open these files. Fixes: 2d86612aacb7805f ("perf symbol: Correct address for bss symbols") Reviewed-by: Leo Yan <[email protected]> Signed-off-by: Lieven Hey <[email protected]> Tested-by: Leo Yan <[email protected]> Cc: Leo Yan <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2022-09-21perf test: Add a new test for perf stat cgroup BPF counterNamhyung Kim1-0/+83
$ sudo ./perf test -v each-cgroup 96: perf stat --bpf-counters --for-each-cgroup test : --- start --- test child forked, pid 79600 test child finished with 0 ---- end ---- perf stat --bpf-counters --for-each-cgroup test: Ok Signed-off-by: Namhyung Kim <[email protected]> Cc: Adrian Hunter <[email protected]> Cc: Ian Rogers <[email protected]> Cc: Ingo Molnar <[email protected]> Cc: Jiri Olsa <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: Song Liu <[email protected]> Cc: [email protected] Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2022-09-21perf stat: Use evsel->core.cpus to iterate cpus in BPF cgroup countersNamhyung Kim1-3/+3
If it mixes core and uncore events, each evsel would have different cpu map. But it assumed they are same with evlist's all_cpus and accessed by the same index. This resulted in a crash like below. $ perf stat -a --bpf-counters --for-each_cgroup ^. -e cycles,imc/cas_count_read/ sleep 1 Segmentation fault While it's not recommended to use uncore events for cgroup aggregation, it should not crash. Signed-off-by: Namhyung Kim <[email protected]> Cc: Adrian Hunter <[email protected]> Cc: Ian Rogers <[email protected]> Cc: Ingo Molnar <[email protected]> Cc: Jiri Olsa <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: Song Liu <[email protected]> Cc: [email protected] Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2022-09-21perf stat: Fix cpu map index in bperf cgroup codeNamhyung Kim1-2/+2
The previous cpu map introduced a bug in the bperf cgroup counter. This results in a failure when user gives a partial cpu map starting from non-zero. $ sudo ./perf stat -C 1-2 --bpf-counters --for-each-cgroup ^. sleep 1 libbpf: prog 'on_cgrp_switch': failed to create BPF link for perf_event FD 0: -9 (Bad file descriptor) Failed to attach cgroup program To get the FD of an evsel, it should use a map index not the CPU number. Fixes: 0255571a16059c8e ("perf cpumap: Switch to using perf_cpu_map API") Signed-off-by: Namhyung Kim <[email protected]> Cc: Adrian Hunter <[email protected]> Cc: [email protected] Cc: Ian Rogers <[email protected]> Cc: Ingo Molnar <[email protected]> Cc: Jiri Olsa <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: Song Liu <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2022-09-21perf stat: Fix BPF program section nameNamhyung Kim1-1/+1
It seems the recent libbpf got more strict about the section name. I'm seeing a failure like this: $ sudo ./perf stat -a --bpf-counters --for-each-cgroup ^. sleep 1 libbpf: prog 'on_cgrp_switch': missing BPF prog type, check ELF section name 'perf_events' libbpf: prog 'on_cgrp_switch': failed to load: -22 libbpf: failed to load object 'bperf_cgroup_bpf' libbpf: failed to load BPF skeleton 'bperf_cgroup_bpf': -22 Failed to load cgroup skeleton The section name should be 'perf_event' (without the trailing 's'). Although it's related to the libbpf change, it'd be better fix the section name in the first place. Fixes: 944138f048f7d759 ("perf stat: Enable BPF counter with --for-each-cgroup") Signed-off-by: Namhyung Kim <[email protected]> Cc: Adrian Hunter <[email protected]> Cc: [email protected] Cc: Ian Rogers <[email protected]> Cc: Ingo Molnar <[email protected]> Cc: Jiri Olsa <[email protected]> Cc: Namhyung Kim <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: Song Liu <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2022-09-21Merge tag 'v6.0-rc6' into locking/core, to refresh the branchIngo Molnar997-26502/+220603
Signed-off-by: Ingo Molnar <[email protected]>
2022-09-20libbpf: Fix NULL pointer exception in API btf_dump__dump_type_dataXin Liu1-1/+1
We found that function btf_dump__dump_type_data can be called by the user as an API, but in this function, the `opts` parameter may be used as a null pointer.This causes `opts->indent_str` to trigger a NULL pointer exception. Fixes: 2ce8450ef5a3 ("libbpf: add bpf_object__open_{file, mem} w/ extensible opts") Signed-off-by: Xin Liu <[email protected]> Signed-off-by: Weibin Kong <[email protected]> Signed-off-by: Andrii Nakryiko <[email protected]> Link: https://lore.kernel.org/bpf/[email protected]
2022-09-20selftests/tc-testings: add list case for basic filterZhengchao Shao1-0/+47
Test 0811: Add multiple basic filter with cmp ematch u8/link layer and default action and dump them Test 5129: List basic filters Signed-off-by: Zhengchao Shao <[email protected]> Reviewed-by: Jamal Hadi Salim <[email protected]> Reviewed-by: Victor Nogueira <[email protected]> Tested-by: Victor Nogueira <[email protected]> Signed-off-by: Jakub Kicinski <[email protected]>
2022-09-20selftests/tc-testings: add selftests for tcindex filterZhengchao Shao1-0/+227
Test 8293: Add tcindex filter with default action Test 7281: Add tcindex filter with hash size and pass action Test b294: Add tcindex filter with mask shift and reclassify action Test 0532: Add tcindex filter with pass_on and continue actions Test d473: Add tcindex filter with pipe action Test 2940: Add tcindex filter with miltiple actions Test 1893: List tcindex filters Test 2041: Change tcindex filter with pass action Test 9203: Replace tcindex filter with pass action Test 7957: Delete tcindex filter with drop action Signed-off-by: Zhengchao Shao <[email protected]> Reviewed-by: Jamal Hadi Salim <[email protected]> Reviewed-by: Victor Nogueira <[email protected]> Tested-by: Victor Nogueira <[email protected]> Signed-off-by: Jakub Kicinski <[email protected]>
2022-09-20selftests/tc-testings: add selftests for rsvp filterZhengchao Shao1-0/+203
Test 2141: Add rsvp filter with tcp proto and specific IP address Test 5267: Add rsvp filter with udp proto and specific IP address Test 2819: Add rsvp filter with src ip and src port Test c967: Add rsvp filter with tunnelid and continue action Test 5463: Add rsvp filter with tunnel and pipe action Test 2332: Add rsvp filter with miltiple actions Test 8879: Add rsvp filter with tunnel and skp flag Test 8261: List rsvp filters Test 8989: Delete rsvp filter Signed-off-by: Zhengchao Shao <[email protected]> Reviewed-by: Jamal Hadi Salim <[email protected]> Reviewed-by: Victor Nogueira <[email protected]> Tested-by: Victor Nogueira <[email protected]> Signed-off-by: Jakub Kicinski <[email protected]>
2022-09-20selftests/tc-testings: add selftests for route filterZhengchao Shao1-0/+181
Test e122: Add route filter with from and to tag Test 6573: Add route filter with fromif and to tag Test 1362: Add route filter with to flag and reclassify action Test 4720: Add route filter with from flag and continue actions Test 2812: Add route filter with form tag and pipe action Test 7994: Add route filter with miltiple actions Test 4312: List route filters Test 2634: Delete route filter with pipe action Signed-off-by: Zhengchao Shao <[email protected]> Reviewed-by: Jamal Hadi Salim <[email protected]> Reviewed-by: Victor Nogueira <[email protected]> Tested-by: Victor Nogueira <[email protected]> Signed-off-by: Jakub Kicinski <[email protected]>
2022-09-20selftests/tc-testings: add selftests for flow filterZhengchao Shao1-0/+623
Test 5294: Add flow filter with map key and ops Test 3514: Add flow filter with map key or ops Test 7534: Add flow filter with map key xor ops Test 4524: Add flow filter with map key rshift ops Test 0230: Add flow filter with map key addend ops Test 2344: Add flow filter with src map key Test 9304: Add flow filter with proto map key Test 9038: Add flow filter with proto-src map key Test 2a03: Add flow filter with proto-dst map key Test a073: Add flow filter with iif map key Test 3b20: Add flow filter with priority map key Test 8945: Add flow filter with mark map key Test c034: Add flow filter with nfct map key Test 0205: Add flow filter with nfct-src map key Test 5315: Add flow filter with nfct-src map key Test 7849: Add flow filter with nfct-proto-src map key Test 9902: Add flow filter with nfct-proto-dst map key Test 6742: Add flow filter with rt-classid map key Test 5432: Add flow filter with sk-uid map key Test 4134: Add flow filter with sk-gid map key Test 4522: Add flow filter with vlan-tag map key Test 4253: Add flow filter with rxhash map key Test 4452: Add flow filter with hash key list Test 4341: Add flow filter with muliple ops Test 4392: List flow filters Test 4322: Change flow filter with map key num Test 2320: Replace flow filter with map key num Test 3213: Delete flow filter with map key num Signed-off-by: Zhengchao Shao <[email protected]> Reviewed-by: Jamal Hadi Salim <[email protected]> Reviewed-by: Victor Nogueira <[email protected]> Tested-by: Victor Nogueira <[email protected]> Signed-off-by: Jakub Kicinski <[email protected]>
2022-09-20selftests/tc-testings: add selftests for cgroup filterZhengchao Shao1-0/+1236
Test 6273: Add cgroup filter with cmp ematch u8/link layer and drop action Test 4721: Add cgroup filter with cmp ematch u8/link layer with trans flag and pass action Test d392: Add cgroup filter with cmp ematch u16/link layer and pipe action Test 0234: Add cgroup filter with cmp ematch u32/link layer and miltiple actions Test 8499: Add cgroup filter with cmp ematch u8/network layer and pass action Test b273: Add cgroup filter with cmp ematch u8/network layer with trans flag and drop action Test 1934: Add cgroup filter with cmp ematch u16/network layer and pipe action Test 2733: Add cgroup filter with cmp ematch u32/network layer and miltiple actions Test 3271: Add cgroup filter with NOT cmp ematch rule and pass action Test 2362: Add cgroup filter with two ANDed cmp ematch rules and single action Test 9993: Add cgroup filter with two ORed cmp ematch rules and single action Test 2331: Add cgroup filter with two ANDed cmp ematch rules and one ORed ematch rule and single action Test 3645: Add cgroup filter with two ANDed cmp ematch rules and one NOT ORed ematch rule and single action Test b124: Add cgroup filter with u32 ematch u8/zero offset and drop action Test 7381: Add cgroup filter with u32 ematch u8/zero offset and invalid value >0xFF Test 2231: Add cgroup filter with u32 ematch u8/positive offset and drop action Test 1882: Add cgroup filter with u32 ematch u8/invalid mask >0xFF Test 1237: Add cgroup filter with u32 ematch u8/missing offset Test 3812: Add cgroup filter with u32 ematch u8/missing AT keyword Test 1112: Add cgroup filter with u32 ematch u8/missing value Test 3241: Add cgroup filter with u32 ematch u8/non-numeric value Test e231: Add cgroup filter with u32 ematch u8/non-numeric mask Test 4652: Add cgroup filter with u32 ematch u8/negative offset and pass Test 1331: Add cgroup filter with u32 ematch u16/zero offset and pipe action Test e354: Add cgroup filter with u32 ematch u16/zero offset and invalid value >0xFFFF Test 3538: Add cgroup filter with u32 ematch u16/positive offset and drop action Test 4576: Add cgroup filter with u32 ematch u16/invalid mask >0xFFFF Test b842: Add cgroup filter with u32 ematch u16/missing offset Test c924: Add cgroup filter with u32 ematch u16/missing AT keyword Test cc93: Add cgroup filter with u32 ematch u16/missing value Test 123c: Add cgroup filter with u32 ematch u16/non-numeric value Test 3675: Add cgroup filter with u32 ematch u16/non-numeric mask Test 1123: Add cgroup filter with u32 ematch u16/negative offset and drop action Test 4234: Add cgroup filter with u32 ematch u16/nexthdr+ offset and pass action Test e912: Add cgroup filter with u32 ematch u32/zero offset and pipe action Test 1435: Add cgroup filter with u32 ematch u32/positive offset and drop action Test 1282: Add cgroup filter with u32 ematch u32/missing offset Test 6456: Add cgroup filter with u32 ematch u32/missing AT keyword Test 4231: Add cgroup filter with u32 ematch u32/missing value Test 2131: Add cgroup filter with u32 ematch u32/non-numeric value Test f125: Add cgroup filter with u32 ematch u32/non-numeric mask Test 4316: Add cgroup filter with u32 ematch u32/negative offset and drop action Test 23ae: Add cgroup filter with u32 ematch u32/nexthdr+ offset and pipe action Test 23a1: Add cgroup filter with canid ematch and single SFF Test 324f: Add cgroup filter with canid ematch and single SFF with mask Test 2576: Add cgroup filter with canid ematch and multiple SFF Test 4839: Add cgroup filter with canid ematch and multiple SFF with masks Test 6713: Add cgroup filter with canid ematch and single EFF Test ab9d: Add cgroup filter with canid ematch and multiple EFF with masks Test 5349: Add cgroup filter with canid ematch and a combination of SFF/EFF Test c934: Add cgroup filter with canid ematch and a combination of SFF/EFF with masks Test 4319: Replace cgroup filter with diffferent match Test 4636: Delete cgroup filter Signed-off-by: Zhengchao Shao <[email protected]> Reviewed-by: Jamal Hadi Salim <[email protected]> Reviewed-by: Victor Nogueira <[email protected]> Tested-by: Victor Nogueira <[email protected]> Signed-off-by: Jakub Kicinski <[email protected]>
2022-09-20selftests/tc-testings: add selftests for bpf filterZhengchao Shao1-0/+171
Test 23c3: Add cBPF filter with valid bytecode Test 1563: Add cBPF filter with invalid bytecode Test 2334: Add eBPF filter with valid object-file Test 2373: Add eBPF filter with invalid object-file Test 4423: Replace cBPF bytecode Test 5122: Delete cBPF filter Test e0a9: List cBPF filters Signed-off-by: Zhengchao Shao <[email protected]> Reviewed-by: Jamal Hadi Salim <[email protected]> Reviewed-by: Victor Nogueira <[email protected]> Tested-by: Victor Nogueira <[email protected]> Signed-off-by: Jakub Kicinski <[email protected]>
2022-09-20wireguard: selftests: do not install headers on UMLJason A. Donenfeld1-0/+2
Since 1b620d539ccc ("kbuild: disable header exports for UML in a straightforward way"), installing headers fails on UML, so just disable installing them, since they're not needed anyway on the architecture. Fixes: b438b3b8d6e6 ("wireguard: selftests: support UML") Signed-off-by: Jason A. Donenfeld <[email protected]> Signed-off-by: Jakub Kicinski <[email protected]>
2022-09-20selftests/bonding: add a test for bonding lladdr targetHangbin Liu2-0/+66
This is a regression test for commit 592335a4164c ("bonding: accept unsolicited NA message") and commit b7f14132bf58 ("bonding: use unspecified address if no available link local address"). When the bond interface up and no available link local address, unspecified address(::) is used to send the NS message. The unsolicited NA message should also be accepted for validation. Signed-off-by: Hangbin Liu <[email protected]> Acked-by: Jonathan Toppins <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2022-09-20Merge tag 'execve-v6.0-rc7' of ↵Linus Torvalds2-91/+1
git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux Pull execve reverts from Kees Cook: "The recent work to support time namespace unsharing turns out to have some undesirable corner cases, so rather than allowing the API to stay exposed for another release, it'd be best to remove it ASAP, with the replacement getting another cycle of testing. Nothing is known to use this yet, so no userspace breakage is expected. For more details, see: https://lore.kernel.org/lkml/[email protected] Summary: - Remove the recent 'unshare time namespace on vfork+exec' feature (Andrei Vagin)" * tag 'execve-v6.0-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux: Revert "fs/exec: allow to unshare a time namespace on vfork+exec" Revert "selftests/timens: add a test for vfork+exit"
2022-09-20selftests: forwarding: Add test cases for unresolved multicast routesIdo Schimmel1-1/+91
Add IPv4 and IPv6 test cases for unresolved multicast routes, testing that queued packets are forwarded after installing a matching (S, G) route. The test cases can be used to reproduce the bugs fixed in "ipmr: Always call ip{,6}_mr_forward() from RCU read-side critical section". Signed-off-by: Ido Schimmel <[email protected]> Signed-off-by: Jakub Kicinski <[email protected]>
2022-09-20selftests: seg6: add selftest for NEXT-C-SID flavor in SRv6 End behaviorAndrea Mayer2-0/+1146
This selftest is designed for testing the support of NEXT-C-SID flavor for SRv6 End behavior. It instantiates a virtual network composed of several nodes: hosts and SRv6 routers. Each node is realized using a network namespace that is properly interconnected to others through veth pairs. The test considers SRv6 routers implementing IPv4/IPv6 L3 VPNs leveraged by hosts for communicating with each other. Such routers i) apply different SRv6 Policies to the traffic received from connected hosts, considering the IPv4 or IPv6 protocols; ii) use the NEXT-C-SID compression mechanism for encoding several SRv6 segments within a single 128-bit SID address, referred to as a Compressed SID (C-SID) container. The NEXT-C-SID is provided as a "flavor" of the SRv6 End behavior, enabling it to properly process the C-SID containers. The correct execution of the enabled NEXT-C-SID SRv6 End behavior is verified through reachability tests carried out between hosts belonging to the same VPN. Signed-off-by: Andrea Mayer <[email protected]> Acked-by: David Ahern <[email protected]> Signed-off-by: Paolo Abeni <[email protected]>
2022-09-19selftests: mlxsw: Remove qos_burst testAmit Cohen1-480/+0
The previous patch added a test which can be used instead of qos_burst.sh. Remove this test. Signed-off-by: Amit Cohen <[email protected]> Reviewed-by: Petr Machata <[email protected]> Signed-off-by: Petr Machata <[email protected]> Signed-off-by: Jakub Kicinski <[email protected]>
2022-09-19selftests: mlxsw: Add QOS test for maximum use of descriptorsAmit Cohen2-0/+296
Add an equivalent test to qos_burst, the test's purpose is same, but the new test uses simpler topology and does not require forcing low speed. In addition, it can be run Spectrum-2 and not only Spectrum-3+. The idea is to use a shaper in order to limit the traffic and create congestion. qos_burst test uses small pool, sends many small packets, and verify that packets are not dropped, which means that many descriptors can be handled. This test should check the change that commit c864769add96 ("mlxsw: Configure descriptor buffers") pushed. Instead, the new test tries to use more than 85% of maximum supported descriptors. The idea is to use big pool (as much as the ASIC supports), such that the pool size does not limit the traffic, then send many small packets, which means that many descriptors are used, and check how many packets the switch can handle. The usage of shaper allows to run the test in all ASICs, regardless of the CPU abilities, as it is able to create the congestion with low rate of packets. Signed-off-by: Amit Cohen <[email protected]> Reviewed-by: Petr Machata <[email protected]> Signed-off-by: Petr Machata <[email protected]> Signed-off-by: Jakub Kicinski <[email protected]>
2022-09-19selftests: devlink_lib: Add function for querying maximum pool sizeAmit Cohen1-0/+5
The maximum pool size is exposed via 'devlink sb' command. The next patch will add a test which increases some pools to the maximum size. Add a function to query the value. Signed-off-by: Amit Cohen <[email protected]> Reviewed-by: Petr Machata <[email protected]> Signed-off-by: Petr Machata <[email protected]> Signed-off-by: Jakub Kicinski <[email protected]>
2022-09-19selftests: mlxsw: Use shapers in QOS RED tests instead of forcing speedAmit Cohen3-16/+15
QOS tests create congestion and verify the switch behavior. To create congestion, they need to have more traffic than the port can handle, so some of them force 1Gbps speed. The tests assume that 1Gbps speed is supported, otherwise, they will fail. Spectrum-4 ASIC will not support this speed in all ports, so to be able to run the tests there, some adjustments are required. Use shapers to limit the traffic instead of forcing speed. Note that for several ports, the speed configuration is just for autoneg issues, so shaper is not needed instead. The tests already use ETS qdisc as a root and RED qdiscs as children. Add a new TBF shaper to limit the rate of traffic, and use it as a root qdisc, then save the previous hierarchy of qdiscs under the new TBF root. In some ASICs, the shapers do not limit the traffic as accurately as forcing speed. To make the tests stable, allow the backlog size to be up to +-10% of the threshold. The aim of the tests is to make sure that with backlog << threshold, there are no drops, and that packets are dropped somewhere in vicinity of the configured threshold. Signed-off-by: Amit Cohen <[email protected]> Reviewed-by: Petr Machata <[email protected]> Signed-off-by: Petr Machata <[email protected]> Signed-off-by: Jakub Kicinski <[email protected]>
Powered by cgit, Gruvboxed by Blaster4385.