| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next
Alexei Starovoitov says:
====================
pull-request: bpf-next 2024-03-11
We've added 59 non-merge commits during the last 9 day(s) which contain
a total of 88 files changed, 4181 insertions(+), 590 deletions(-).
The main changes are:
1) Enforce VM_IOREMAP flag and range in ioremap_page_range and introduce
VM_SPARSE kind and vm_area_[un]map_pages to be used in bpf_arena,
from Alexei.
2) Introduce bpf_arena which is sparse shared memory region between bpf
program and user space where structures inside the arena can have
pointers to other areas of the arena, and pointers work seamlessly for
both user-space programs and bpf programs, from Alexei and Andrii.
3) Introduce may_goto instruction that is a contract between the verifier
and the program. The verifier allows the program to loop assuming it's
behaving well, but reserves the right to terminate it, from Alexei.
4) Use IETF format for field definitions in the BPF standard
document, from Dave.
5) Extend struct_ops libbpf APIs to allow specify version suffixes for
stuct_ops map types, share the same BPF program between several map
definitions, and other improvements, from Eduard.
6) Enable struct_ops support for more than one page in trampolines,
from Kui-Feng.
7) Support kCFI + BPF on riscv64, from Puranjay.
8) Use bpf_prog_pack for arm64 bpf trampoline, from Puranjay.
9) Fix roundup_pow_of_two undefined behavior on 32-bit archs, from Toke.
====================
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
Adding kprobe multi triggering benchmarks. It's useful now to bench
new fprobe implementation and might be useful later as well.
Signed-off-by: Jiri Olsa <[email protected]>
Signed-off-by: Andrii Nakryiko <[email protected]>
Link: https://lore.kernel.org/bpf/[email protected]
|
|
bpf_arena_htab.h - hash table implemented as bpf program
Signed-off-by: Alexei Starovoitov <[email protected]>
Signed-off-by: Andrii Nakryiko <[email protected]>
Link: https://lore.kernel.org/bpf/[email protected]
|
|
bpf_arena_alloc.h - implements page_frag allocator as a bpf program.
bpf_arena_list.h - doubly linked link list as a bpf program.
Compiled as a bpf program and as native C code.
Signed-off-by: Alexei Starovoitov <[email protected]>
Signed-off-by: Andrii Nakryiko <[email protected]>
Link: https://lore.kernel.org/bpf/[email protected]
|
|
Add unit tests for bpf_arena_alloc/free_pages() functionality
and bpf_arena_common.h with a set of common helpers and macros that
is used in this test and the following patches.
Also modify test_loader that didn't support running bpf_prog_type_syscall
programs.
Signed-off-by: Alexei Starovoitov <[email protected]>
Signed-off-by: Andrii Nakryiko <[email protected]>
Link: https://lore.kernel.org/bpf/[email protected]
|
|
Introduce helper macro bpf_addr_space_cast() that emits:
rX = rX
instruction with off = BPF_ADDR_SPACE_CAST
and encodes dest and src address_space-s into imm32.
It's useful with older LLVM that doesn't emit this insn automatically.
Signed-off-by: Alexei Starovoitov <[email protected]>
Signed-off-by: Andrii Nakryiko <[email protected]>
Acked-by: Kumar Kartikeya Dwivedi <[email protected]>
Link: https://lore.kernel.org/bpf/[email protected]
|
|
LLVM automatically places __arena variables into ".arena.1" ELF section.
In order to use such global variables bpf program must include definition
of arena map in ".maps" section, like:
struct {
__uint(type, BPF_MAP_TYPE_ARENA);
__uint(map_flags, BPF_F_MMAPABLE);
__uint(max_entries, 1000); /* number of pages */
__ulong(map_extra, 2ull << 44); /* start of mmap() region */
} arena SEC(".maps");
libbpf recognizes both uses of arena and creates single `struct bpf_map *`
instance in libbpf APIs.
".arena.1" ELF section data is used as initial data image, which is exposed
through skeleton and bpf_map__initial_value() to the user, if they need to tune
it before the load phase. During load phase, this initial image is copied over
into mmap()'ed region corresponding to arena, and discarded.
Few small checks here and there had to be added to make sure this
approach works with bpf_map__initial_value(), mostly due to hard-coded
assumption that map->mmaped is set up with mmap() syscall and should be
munmap()'ed. For arena, .arena.1 can be (much) smaller than maximum
arena size, so this smaller data size has to be tracked separately.
Given it is enforced that there is only one arena for entire bpf_object
instance, we just keep it in a separate field. This can be generalized
if necessary later.
All global variables from ".arena.1" section are accessible from user space
via skel->arena->name_of_var.
For bss/data/rodata the skeleton/libbpf perform the following sequence:
1. addr = mmap(MAP_ANONYMOUS)
2. user space optionally modifies global vars
3. map_fd = bpf_create_map()
4. bpf_update_map_elem(map_fd, addr) // to store values into the kernel
5. mmap(addr, MAP_FIXED, map_fd)
after step 5 user spaces see the values it wrote at step 2 at the same addresses
arena doesn't support update_map_elem. Hence skeleton/libbpf do:
1. addr = malloc(sizeof SEC ".arena.1")
2. user space optionally modifies global vars
3. map_fd = bpf_create_map(MAP_TYPE_ARENA)
4. real_addr = mmap(map->map_extra, MAP_SHARED | MAP_FIXED, map_fd)
5. memcpy(real_addr, addr) // this will fault-in and allocate pages
At the end look and feel of global data vs __arena global data is the same from
bpf prog pov.
Another complication is:
struct {
__uint(type, BPF_MAP_TYPE_ARENA);
} arena SEC(".maps");
int __arena foo;
int bar;
ptr1 = &foo; // relocation against ".arena.1" section
ptr2 = &arena; // relocation against ".maps" section
ptr3 = &bar; // relocation against ".bss" section
Fo the kernel ptr1 and ptr2 has point to the same arena's map_fd
while ptr3 points to a different global array's map_fd.
For the verifier:
ptr1->type == unknown_scalar
ptr2->type == const_ptr_to_map
ptr3->type == ptr_to_map_value
After verification, from JIT pov all 3 ptr-s are normal ld_imm64 insns.
Signed-off-by: Andrii Nakryiko <[email protected]>
Signed-off-by: Alexei Starovoitov <[email protected]>
Signed-off-by: Andrii Nakryiko <[email protected]>
Acked-by: Quentin Monnet <[email protected]>
Link: https://lore.kernel.org/bpf/[email protected]
|
|
Teach bpftool to recognize arena map type.
Signed-off-by: Alexei Starovoitov <[email protected]>
Signed-off-by: Andrii Nakryiko <[email protected]>
Acked-by: Quentin Monnet <[email protected]>
Link: https://lore.kernel.org/bpf/[email protected]
|
|
mmap() bpf_arena right after creation, since the kernel needs to
remember the address returned from mmap. This is user_vm_start.
LLVM will generate bpf_arena_cast_user() instructions where
necessary and JIT will add upper 32-bit of user_vm_start
to such pointers.
Fix up bpf_map_mmap_sz() to compute mmap size as
map->value_size * map->max_entries for arrays and
PAGE_SIZE * map->max_entries for arena.
Don't set BTF at arena creation time, since it doesn't support it.
Signed-off-by: Alexei Starovoitov <[email protected]>
Signed-off-by: Andrii Nakryiko <[email protected]>
Link: https://lore.kernel.org/bpf/[email protected]
|
|
Add __arg_arena to bpf_helpers.h
Signed-off-by: Alexei Starovoitov <[email protected]>
Signed-off-by: Andrii Nakryiko <[email protected]>
Acked-by: Kumar Kartikeya Dwivedi <[email protected]>
Acked-by: Andrii Nakryiko <[email protected]>
Link: https://lore.kernel.org/bpf/[email protected]
|
|
LLVM generates rX = addr_space_cast(rY, dst_addr_space, src_addr_space)
instruction when pointers in non-zero address space are used by the bpf
program. Recognize this insn in uapi and in bpf disassembler.
Signed-off-by: Alexei Starovoitov <[email protected]>
Signed-off-by: Andrii Nakryiko <[email protected]>
Acked-by: Kumar Kartikeya Dwivedi <[email protected]>
Link: https://lore.kernel.org/bpf/[email protected]
|
|
Introduce bpf_arena, which is a sparse shared memory region between the bpf
program and user space.
Use cases:
1. User space mmap-s bpf_arena and uses it as a traditional mmap-ed
anonymous region, like memcached or any key/value storage. The bpf
program implements an in-kernel accelerator. XDP prog can search for
a key in bpf_arena and return a value without going to user space.
2. The bpf program builds arbitrary data structures in bpf_arena (hash
tables, rb-trees, sparse arrays), while user space consumes it.
3. bpf_arena is a "heap" of memory from the bpf program's point of view.
The user space may mmap it, but bpf program will not convert pointers
to user base at run-time to improve bpf program speed.
Initially, the kernel vm_area and user vma are not populated. User space
can fault in pages within the range. While servicing a page fault,
bpf_arena logic will insert a new page into the kernel and user vmas. The
bpf program can allocate pages from that region via
bpf_arena_alloc_pages(). This kernel function will insert pages into the
kernel vm_area. The subsequent fault-in from user space will populate that
page into the user vma. The BPF_F_SEGV_ON_FAULT flag at arena creation time
can be used to prevent fault-in from user space. In such a case, if a page
is not allocated by the bpf program and not present in the kernel vm_area,
the user process will segfault. This is useful for use cases 2 and 3 above.
bpf_arena_alloc_pages() is similar to user space mmap(). It allocates pages
either at a specific address within the arena or allocates a range with the
maple tree. bpf_arena_free_pages() is analogous to munmap(), which frees
pages and removes the range from the kernel vm_area and from user process
vmas.
bpf_arena can be used as a bpf program "heap" of up to 4GB. The speed of
bpf program is more important than ease of sharing with user space. This is
use case 3. In such a case, the BPF_F_NO_USER_CONV flag is recommended.
It will tell the verifier to treat the rX = bpf_arena_cast_user(rY)
instruction as a 32-bit move wX = wY, which will improve bpf prog
performance. Otherwise, bpf_arena_cast_user is translated by JIT to
conditionally add the upper 32 bits of user vm_start (if the pointer is not
NULL) to arena pointers before they are stored into memory. This way, user
space sees them as valid 64-bit pointers.
Diff https://github.com/llvm/llvm-project/pull/84410 enables LLVM BPF
backend generate the bpf_addr_space_cast() instruction to cast pointers
between address_space(1) which is reserved for bpf_arena pointers and
default address space zero. All arena pointers in a bpf program written in
C language are tagged as __attribute__((address_space(1))). Hence, clang
provides helpful diagnostics when pointers cross address space. Libbpf and
the kernel support only address_space == 1. All other address space
identifiers are reserved.
rX = bpf_addr_space_cast(rY, /* dst_as */ 1, /* src_as */ 0) tells the
verifier that rX->type = PTR_TO_ARENA. Any further operations on
PTR_TO_ARENA register have to be in the 32-bit domain. The verifier will
mark load/store through PTR_TO_ARENA with PROBE_MEM32. JIT will generate
them as kern_vm_start + 32bit_addr memory accesses. The behavior is similar
to copy_from_kernel_nofault() except that no address checks are necessary.
The address is guaranteed to be in the 4GB range. If the page is not
present, the destination register is zeroed on read, and the operation is
ignored on write.
rX = bpf_addr_space_cast(rY, 0, 1) tells the verifier that rX->type =
unknown scalar. If arena->map_flags has BPF_F_NO_USER_CONV set, then the
verifier converts such cast instructions to mov32. Otherwise, JIT will emit
native code equivalent to:
rX = (u32)rY;
if (rY)
rX |= clear_lo32_bits(arena->user_vm_start); /* replace hi32 bits in rX */
After such conversion, the pointer becomes a valid user pointer within
bpf_arena range. The user process can access data structures created in
bpf_arena without any additional computations. For example, a linked list
built by a bpf program can be walked natively by user space.
Signed-off-by: Alexei Starovoitov <[email protected]>
Signed-off-by: Andrii Nakryiko <[email protected]>
Reviewed-by: Barret Rhoden <[email protected]>
Link: https://lore.kernel.org/bpf/[email protected]
|
|
The family struct is auto-generated for new families, support
use of the sock_priv_* mechanism added in commit a731132424ad
("genetlink: introduce per-sock family private storage").
For example if the family wants to use struct sk_buff as its
private struct (unrealistic but just for illustration), it would
add to its spec:
kernel-family:
headers: [ "linux/skbuff.h" ]
sock-priv: struct sk_buff
ynl-gen-c will declare the appropriate priv size and hook
in function prototypes to be implemented by the family.
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
Commit e8a6c515ff5f ("tools: ynl: allow user to pass enum string
instead of scalar value") added a semicolon at the end of a line.
Reviewed-by: Jiri Pirko <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
This patch uses the public var KSFT_SKIP in mptcp_lib.sh instead of
ksft_skip, and drop 'ksft_skip=4' in mptcp_join.sh.
Use KSFT_PASS and KSFT_FAIL macros instead of 0 and 1 after 'exit '
and 'ret=' in all scripts:
exit 0 -> exit ${KSFT_PASS}
exit 1 -> exit ${KSFT_FAIL}
ret=0 -> ret=${KSFT_PASS}
ret=1 -> ret=${KSFT_FAIL}
Signed-off-by: Geliang Tang <[email protected]>
Reviewed-by: Matthieu Baerts (NGI0) <[email protected]>
Signed-off-by: Matthieu Baerts (NGI0) <[email protected]>
Link: https://lore.kernel.org/r/20240308-upstream-net-next-20240308-selftests-mptcp-unification-v1-15-4f42c347b653@kernel.org
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
MPTCP event macros (SUB_ESTABLISHED, LISTENER_CREATED, LISTENER_CLOSED),
and the protocol family macros (AF_INET, AF_INET6) are defined in both
mptcp_join.sh and userspace_pm.sh. In order not to duplicate code, this
patch declares them all in mptcp_lib.sh with MPTCP_LIB_ prefixs.
Signed-off-by: Geliang Tang <[email protected]>
Reviewed-by: Matthieu Baerts (NGI0) <[email protected]>
Signed-off-by: Matthieu Baerts (NGI0) <[email protected]>
Link: https://lore.kernel.org/r/20240308-upstream-net-next-20240308-selftests-mptcp-unification-v1-14-4f42c347b653@kernel.org
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
To avoid duplicated code in different MPTCP selftests, we can add and use
helpers defined in mptcp_lib.sh.
The helper verify_listener_events() is defined both in mptcp_join.sh and
userspace_pm.sh, export it into mptcp_lib.sh and rename it with mptcp_lib_
prefix. Use this new helper in both scripts.
Signed-off-by: Geliang Tang <[email protected]>
Reviewed-by: Matthieu Baerts (NGI0) <[email protected]>
Signed-off-by: Matthieu Baerts (NGI0) <[email protected]>
Link: https://lore.kernel.org/r/20240308-upstream-net-next-20240308-selftests-mptcp-unification-v1-13-4f42c347b653@kernel.org
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
verify_listener_events() helper will be exported into mptcp_lib.sh as a
public function, but print_test() is invoked in it, which is a private
function in userspace_pm.sh only. So this patch moves print_test() out of
verify_listener_events().
Signed-off-by: Geliang Tang <[email protected]>
Reviewed-by: Matthieu Baerts (NGI0) <[email protected]>
Signed-off-by: Matthieu Baerts (NGI0) <[email protected]>
Link: https://lore.kernel.org/r/20240308-upstream-net-next-20240308-selftests-mptcp-unification-v1-12-4f42c347b653@kernel.org
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
Extract the main part of check_expected() in userspace_pm.sh to a new
function mptcp_lib_check_expected() in mptcp_lib.sh. It will be used
in both mptcp_john.sh and userspace_pm.sh. check_expected_one() is
moved into mptcp_lib.sh too as mptcp_lib_check_expected_one().
Signed-off-by: Geliang Tang <[email protected]>
Reviewed-by: Matthieu Baerts (NGI0) <[email protected]>
Signed-off-by: Matthieu Baerts (NGI0) <[email protected]>
Link: https://lore.kernel.org/r/20240308-upstream-net-next-20240308-selftests-mptcp-unification-v1-11-4f42c347b653@kernel.org
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
This patch modifies test_fail() to call mptcp_lib_pr_fail() only if there
are arguments (if [ ${#} -gt 0 ]) in userspace_pm.sh, add arguments
"unexpected type: ${type}" when calling test_fail() from test_remove().
Then mptcp_lib_pr_fail() can be used in check_expected_one() instead of
test_fail().
The same in mptcp_join.sh, calling fail_test() without argument, and adapt
this helper not to call print_fail() in this case.
Signed-off-by: Geliang Tang <[email protected]>
Reviewed-by: Matthieu Baerts (NGI0) <[email protected]>
Signed-off-by: Matthieu Baerts (NGI0) <[email protected]>
Link: https://lore.kernel.org/r/20240308-upstream-net-next-20240308-selftests-mptcp-unification-v1-10-4f42c347b653@kernel.org
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
To unify the output formats of all test scripts, this patch adds
four more helpers:
mptcp_lib_pr_ok()
mptcp_lib_pr_skip()
mptcp_lib_pr_fail()
mptcp_lib_pr_info()
to print out [ OK ], [SKIP], [FAIL] and 'INFO: ' with colors. Use them
in all scripts to print the "ok/skip/fail/info' using the same 'format'.
Having colors helps to quickly identify issues when looking at a long
list of output logs and results.
Note that now all print the same keywords, which was not the case
before, but it is good to uniform that.
Signed-off-by: Geliang Tang <[email protected]>
Reviewed-by: Matthieu Baerts (NGI0) <[email protected]>
Signed-off-by: Matthieu Baerts (NGI0) <[email protected]>
Link: https://lore.kernel.org/r/20240308-upstream-net-next-20240308-selftests-mptcp-unification-v1-9-4f42c347b653@kernel.org
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
This patch uses addition assignment operator (+=) to append strings
instead of duplicating the variable name in mptcp_connect.sh and
mptcp_join.sh.
This can make the statements shorter.
Note: in mptcp_connect.sh, add a local variable extra in do_transfer to
save the various extra warning logs, using += to append it. And add a
new variable tc_info to save various tc info, also using += to append it.
This can make the code more readable and prepare for the next commit.
Signed-off-by: Geliang Tang <[email protected]>
Reviewed-by: Matthieu Baerts (NGI0) <[email protected]>
Signed-off-by: Matthieu Baerts (NGI0) <[email protected]>
Link: https://lore.kernel.org/r/20240308-upstream-net-next-20240308-selftests-mptcp-unification-v1-8-4f42c347b653@kernel.org
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
This patch adds a new helper mptcp_lib_print_title(), a wrapper of
mptcp_lib_inc_test_counter() and mptcp_lib_pr_title_counter(), to
print out test counter in each test result and increase the counter.
Use this helper to print out test counters for every tests in diag.sh,
mptcp_connect.sh, mptcp_sockopt.sh, pm_netlink.sh, simult_flows.sh,
and userspace_pm.sh.
diag.sh:
01 no msk on netns creation [ ok ]
02 listen match for dport 10000 [ ok ]
03 listen match for sport 10000 [ ok ]
04 listen match for saddr and sport [ ok ]
05 all listen sockets [ ok ]
mptcp_connect.sh:
01 New MPTCP socket can be blocked via sysctl [ OK ]
02 Validating network environment with pings [ OK ]
INFO: Using loss of 0.85% delay 31 ms reorder .. with delay 7ms on ns3eth4
03 ns1 MPTCP -> ns1 (10.0.1.1:10000 ) MPTCP (duration 69ms) [ OK ]
04 ns1 MPTCP -> ns1 (10.0.1.1:10001 ) TCP (duration 20ms) [ OK ]
05 ns1 TCP -> ns1 (10.0.1.1:10002 ) MPTCP (duration 16ms) [ OK ]
mptcp_sockopt.sh:
01 Transfer v4 [ OK ]
02 Mark v4 [ OK ]
03 Transfer v6 [ OK ]
04 Mark v6 [ OK ]
05 SOL_MPTCP sockopt v4 [ OK ]
pm_netlink.sh:
01 defaults addr list [ OK ]
02 simple add/get addr [ OK ]
03 dump addrs [ OK ]
04 simple del addr [ OK ]
05 dump addrs after del [ OK ]
simult_flows.sh:
01 balanced bwidth 7391 max 8456 [ OK ]
02 balanced bwidth - reverse direction 7403 max 8456 [ OK ]
03 balanced bwidth with unbalanced delay 7429 max 8456 [ OK ]
04 balanced bwidth with unbalanced delay - reverse ... 7485 max 8456 [ OK ]
05 unbalanced bwidth 7549 max 8456 [ OK ]
userspace_pm.sh:
01 Created network namespaces ns1, ns2 [ OK ]
INFO: Make connections
02 Established IPv4 MPTCP Connection ns2 => ns1 [ OK ]
03 Established IPv6 MPTCP Connection ns2 => ns1 [ OK ]
INFO: Announce tests
04 ADD_ADDR 10.0.2.2 (ns2) => ns1, invalid token [ OK ]
05 ADD_ADDR id:67 10.0.2.2 (ns2) => ns1, reuse port [ OK ]
Having test counters helps to quickly identify issues when looking at a
long list of output logs and results.
Signed-off-by: Geliang Tang <[email protected]>
Reviewed-by: Matthieu Baerts (NGI0) <[email protected]>
Signed-off-by: Matthieu Baerts (NGI0) <[email protected]>
Link: https://lore.kernel.org/r/20240308-upstream-net-next-20240308-selftests-mptcp-unification-v1-7-4f42c347b653@kernel.org
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
This patch adds a new variable MPTCP_LIB_TEST_FORMAT as the test title
printing format. Also add a helper mptcp_lib_print_title() to use this
format to print the test title with test counters. They are used in
mptcp_join.sh first.
Each MPTCP selftest is having subtests, and it helps to give them a
number to quickly identify them. This can be managed by mptcp_lib.sh,
reusing what has been done here. The following commit will use these
new helpers in the other tests.
Signed-off-by: Geliang Tang <[email protected]>
Reviewed-by: Matthieu Baerts (NGI0) <[email protected]>
Signed-off-by: Matthieu Baerts (NGI0) <[email protected]>
Link: https://lore.kernel.org/r/20240308-upstream-net-next-20240308-selftests-mptcp-unification-v1-6-4f42c347b653@kernel.org
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
Variable TEST_COUNT are used in mptcp_connect.sh and mptcp_join.sh as
test counters, which are initialized to 0, while variable test_cnt are used
in diag.sh and simult_flows.sh, which are initialized to 1. To maintain
consistency, this patch renames them all as MPTCP_LIB_TEST_COUNTER,
initializes it to 1, and exports it into mptcp_lib.sh.
Signed-off-by: Geliang Tang <[email protected]>
Reviewed-by: Matthieu Baerts (NGI0) <[email protected]>
Signed-off-by: Matthieu Baerts (NGI0) <[email protected]>
Link: https://lore.kernel.org/r/20240308-upstream-net-next-20240308-selftests-mptcp-unification-v1-5-4f42c347b653@kernel.org
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
Only total test results are printed out in mptcp_sockopt.sh:
PASS: all packets had packet mark set
PASS: SOL_MPTCP getsockopt has expected information
PASS: TCP_INQ cmsg/ioctl -t tcp
PASS: TCP_INQ cmsg/ioctl -6 -t tcp
PASS: TCP_INQ cmsg/ioctl -r tcp
PASS: TCP_INQ cmsg/ioctl -6 -r tcp
PASS: TCP_INQ cmsg/ioctl -r tcp -t tcp
They mismatch with the test results:
ok 1 - mptcp_sockopt: mark ipv4
ok 2 - mptcp_sockopt: transfer ipv4
ok 3 - mptcp_sockopt: mark ipv6
ok 4 - mptcp_sockopt: transfer ipv6
ok 5 - mptcp_sockopt: sockopt v4
ok 6 - mptcp_sockopt: sockopt v6
ok 7 - mptcp_sockopt: TCP_INQ: -t tcp
ok 8 - mptcp_sockopt: TCP_INQ: -6 -t tcp
ok 9 - mptcp_sockopt: TCP_INQ: -r tcp
ok 10 - mptcp_sockopt: TCP_INQ: -6 -r tcp
ok 11 - mptcp_sockopt: TCP_INQ: -r tcp -t tcp
'mptcp_sockopt.sh' now display more detailed results + why (what you had
in a former patch from v6, merged here). It no longer displays 'PASS:',
because it is duplicated info now that the detailed are displayed:
Transfer v4 [ OK ]
Mark v4 [ OK ]
Transfer v6 [ OK ]
Mark v6 [ OK ]
SOL_MPTCP sockopt v4 [ OK ]
SOL_MPTCP sockopt v6 [ OK ]
TCP_INQ cmsg/ioctl -t tcp [ OK ]
TCP_INQ cmsg/ioctl -6 -t tcp [ OK ]
TCP_INQ cmsg/ioctl -r tcp [ OK ]
TCP_INQ cmsg/ioctl -6 -r tcp [ OK ]
TCP_INQ cmsg/ioctl -r tcp -t tcp [ OK ]
Also fix the TAP output:
ok 1 - mptcp_sockopt: transfer ipv4
ok 2 - mptcp_sockopt: mark ipv4
ok 3 - mptcp_sockopt: transfer ipv6
ok 4 - mptcp_sockopt: mark ipv6
ok 5 - mptcp_sockopt: sockopt v4
ok 6 - mptcp_sockopt: sockopt v6
ok 7 - mptcp_sockopt: TCP_INQ: -t tcp
ok 8 - mptcp_sockopt: TCP_INQ: -6 -t tcp
ok 9 - mptcp_sockopt: TCP_INQ: -r tcp
ok 10 - mptcp_sockopt: TCP_INQ: -6 -r tcp
ok 11 - mptcp_sockopt: TCP_INQ: -r tcp -t tcp
Signed-off-by: Geliang Tang <[email protected]>
Reviewed-by: Matthieu Baerts (NGI0) <[email protected]>
Signed-off-by: Matthieu Baerts (NGI0) <[email protected]>
Link: https://lore.kernel.org/r/20240308-upstream-net-next-20240308-selftests-mptcp-unification-v1-4-4f42c347b653@kernel.org
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
The first [ OK ] in the output of mptcp_connect.sh misaligns with the
others:
New MPTCP socket can be blocked via sysctl [ OK ]
INFO: validating network environment with pings
INFO: Using loss of 0.85% delay 16 ms reorder 95% 70% with delay 4ms on
ns1 MPTCP -> ns1 (10.0.1.1:10000 ) MPTCP (duration 184ms) [ OK ]
ns1 MPTCP -> ns1 (10.0.1.1:10001 ) TCP (duration 50ms) [ OK ]
ns1 TCP -> ns1 (10.0.1.1:10002 ) MPTCP (duration 55ms) [ OK ]
This patch aligns them by using 69 chars to display the first two lines,
and 50 chars for the other. Since 19 chars are used to display duration
time. Also print out a [ OK ] at the end of the 2nd line for consistency.
Signed-off-by: Geliang Tang <[email protected]>
Reviewed-by: Matthieu Baerts (NGI0) <[email protected]>
Signed-off-by: Matthieu Baerts (NGI0) <[email protected]>
Link: https://lore.kernel.org/r/20240308-upstream-net-next-20240308-selftests-mptcp-unification-v1-3-4f42c347b653@kernel.org
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
This patch adds a new dedicated counter 'port' instead of TEST_COUNT
to increase port numbers in mptcp_connect.sh.
This can avoid outputting discontinuous test counters.
Signed-off-by: Geliang Tang <[email protected]>
Reviewed-by: Matthieu Baerts (NGI0) <[email protected]>
Signed-off-by: Matthieu Baerts (NGI0) <[email protected]>
Link: https://lore.kernel.org/r/20240308-upstream-net-next-20240308-selftests-mptcp-unification-v1-2-4f42c347b653@kernel.org
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
Some error messages are printed to stderr while the others are printed
to 'stdout'. As part of the unification, this patch drop "1>&2" to let
all errors messages are printed to 'stdout'.
Signed-off-by: Geliang Tang <[email protected]>
Reviewed-by: Matthieu Baerts (NGI0) <[email protected]>
Signed-off-by: Matthieu Baerts (NGI0) <[email protected]>
Link: https://lore.kernel.org/r/20240308-upstream-net-next-20240308-selftests-mptcp-unification-v1-1-4f42c347b653@kernel.org
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
Add to lib.sh support for fetching NH stats, and a new library,
router_mpath_nh_lib.sh, with the common code for testing NH stats.
Use the latter from router_mpath_nh.sh and router_mpath_nh_res.sh.
The test works by sending traffic through a NH group, and checking that the
reported values correspond to what the link that ultimately receives the
traffic reports having seen.
Signed-off-by: Petr Machata <[email protected]>
Link: https://lore.kernel.org/r/2a424c54062a5f1efd13b9ec5b2b0e29c6af2574.1709901020.git.petrm@nvidia.com
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
Support using pre-defined values in checks so we don't need to use hard
code number for the string, binary length. e.g. we have a definition like
#define TEAM_STRING_MAX_LEN 32
Which defined in yaml like:
definitions:
-
name: string-max-len
type: const
value: 32
It can be used in the attribute-sets like
attribute-sets:
-
name: attr-option
name-prefix: team-attr-option-
attributes:
-
name: name
type: string
checks:
len: string-max-len
With this patch it will be converted to
[TEAM_ATTR_OPTION_NAME] = { .type = NLA_STRING, .len = TEAM_STRING_MAX_LEN, }
Signed-off-by: Hangbin Liu <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
We already have kprobe and fentry benchmarks. Let's add kretprobe and
fexit ones for completeness.
Signed-off-by: Andrii Nakryiko <[email protected]>
Signed-off-by: Daniel Borkmann <[email protected]>
Acked-by: Jiri Olsa <[email protected]>
Link: https://lore.kernel.org/bpf/[email protected]
|
|
Running the page-pool sample on production machines under moderate
networking load shows recycling rate higher than 100%:
$ page-pool
eth0[2] page pools: 14 (zombies: 0)
refs: 89088 bytes: 364904448 (refs: 0 bytes: 0)
recycling: 100.3% (alloc: 1392:2290247724 recycle: 469289484:1828235386)
Note that outstanding refs (89088) == slow alloc * cache size (1392 * 64)
which means this machine is recycling page pool pages perfectly, not
a single page has been released.
The extra 0.3% is because sample ignores allocations from the ptr_ring.
Treat those the same as alloc_fast, the ring vs cache alloc is
already captured accurately enough by recycling stats.
With the fix:
$ page-pool
eth0[2] page pools: 14 (zombies: 0)
refs: 89088 bytes: 364904448 (refs: 0 bytes: 0)
recycling: 100.0% (alloc: 1392:2331141604 recycle: 473625579:1857460661)
Signed-off-by: Jakub Kicinski <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
There is a spelling mistake in an error message. Fix it.
Signed-off-by: Colin Ian King <[email protected]>
Acked-by: Jakub Kicinski <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
Rx alloc failures are commonly counted by drivers.
Support reporting those via netdev-genl queue stats.
Acked-by: Stanislav Fomichev <[email protected]>
Reviewed-by: Amritha Nambiar <[email protected]>
Reviewed-by: Xuan Zhuo <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
The ethtool-nl family does a good job exposing various protocol
related and IEEE/IETF statistics which used to get dumped under
ethtool -S, with creative names. Queue stats don't have a netlink
API, yet, and remain a lion's share of ethtool -S output for new
drivers. Not only is that bad because the names differ driver to
driver but it's also bug-prone. Intuitively drivers try to report
only the stats for active queues, but querying ethtool stats
involves multiple system calls, and the number of stats is
read separately from the stats themselves. Worse still when user
space asks for values of the stats, it doesn't inform the kernel
how big the buffer is. If number of stats increases in the meantime
kernel will overflow user buffer.
Add a netlink API for dumping queue stats. Queue information is
exposed via the netdev-genl family, so add the stats there.
Support per-queue and sum-for-device dumps. Latter will be useful
when subsequent patches add more interesting common stats than
just bytes and packets.
The API does not currently distinguish between HW and SW stats.
The expectation is that the source of the stats will either not
matter much (good packets) or be obvious (skb alloc errors).
Acked-by: Stanislav Fomichev <[email protected]>
Reviewed-by: Amritha Nambiar <[email protected]>
Reviewed-by: Xuan Zhuo <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
'make_connection' is launched twice: once for IPv4, once for IPv6.
But then, the "pm_nl_ctl events" was launched a first time, killed, then
relaunched after for no particular reason.
We can then move this code, and the generation of the temp file to
exchange, to the init part, and remove extra conditions that no longer
needed.
Reviewed-by: Mat Martineau <[email protected]>
Signed-off-by: Matthieu Baerts (NGI0) <[email protected]>
Link: https://lore.kernel.org/r/20240306-upstream-net-next-20240304-selftests-mptcp-shared-code-shellcheck-v2-12-bc79e6e5e6a0@kernel.org
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
shellcheck recently helped to prevent issues. It is then good to fix the
other harmless issues in order to spot "real" ones later.
Here, two categories of warnings are now ignored:
- SC2317: Command appears to be unreachable. The cleanup() function is
invoked indirectly via the EXIT trap.
- SC2086: Double quote to prevent globbing and word splitting. This is
recommended, but the current usage is correct and there is no need to
do all these modifications to be compliant with this rule.
For the modifications:
- SC2034: ksft_skip appears unused.
- SC2004: $/${} is unnecessary on arithmetic variables.
Now this script is shellcheck (0.9.0) compliant. We can easily spot new
issues.
Reviewed-by: Mat Martineau <[email protected]>
Signed-off-by: Matthieu Baerts (NGI0) <[email protected]>
Link: https://lore.kernel.org/r/20240306-upstream-net-next-20240304-selftests-mptcp-shared-code-shellcheck-v2-11-bc79e6e5e6a0@kernel.org
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
shellcheck recently helped to prevent issues. It is then good to fix the
other harmless issues in order to spot "real" ones later.
Here, two categories of warnings are now ignored:
- SC2317: Command appears to be unreachable. The cleanup() function is
invoked indirectly via the EXIT trap.
- SC2086: Double quote to prevent globbing and word splitting. This is
recommended, but the current usage is correct and there is no need to
do all these modifications to be compliant with this rule.
For the modifications:
- SC2034: ksft_skip appears unused.
- SC2154: optstring is referenced but not assigned.
- SC2006: Use $(...) notation instead of legacy backticks `...`.
Now this script is shellcheck (0.9.0) compliant. We can easily spot new
issues.
Reviewed-by: Mat Martineau <[email protected]>
Signed-off-by: Matthieu Baerts (NGI0) <[email protected]>
Link: https://lore.kernel.org/r/20240306-upstream-net-next-20240304-selftests-mptcp-shared-code-shellcheck-v2-10-bc79e6e5e6a0@kernel.org
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
shellcheck recently helped to prevent issues. It is then good to fix the
other harmless issues in order to spot "real" ones later.
Here, two categories of warnings are now ignored:
- SC2317: Command appears to be unreachable. The cleanup() function is
invoked indirectly via the EXIT trap.
- SC2086: Double quote to prevent globbing and word splitting. This is
recommended, but the current usage is correct and there is no need to
do all these modifications to be compliant with this rule.
For the modifications:
- SC2034: ksft_skip appears unused.
- SC2006: Use $(...) notation instead of legacy backticks `...`.
- SC2145: Argument mixes string and array. Use * or separate argument.
Now this script is shellcheck (0.9.0) compliant. We can easily spot new
issues.
Reviewed-by: Mat Martineau <[email protected]>
Signed-off-by: Matthieu Baerts (NGI0) <[email protected]>
Link: https://lore.kernel.org/r/20240306-upstream-net-next-20240304-selftests-mptcp-shared-code-shellcheck-v2-9-bc79e6e5e6a0@kernel.org
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
shellcheck recently helped to prevent issues. It is then good to fix the
other harmless issues in order to spot "real" ones later.
Here, two categories of warnings are now ignored:
- SC2317: Command appears to be unreachable. The cleanup() function is
invoked indirectly via the EXIT trap.
- SC2086: Double quote to prevent globbing and word splitting. This is
recommended, but the current usage is correct and there is no need to
do all these modifications to be compliant with this rule.
For the modifications:
- SC2034: ksft_skip appears unused.
- SC2181: Check exit code directly with e.g. 'if mycmd;', not
indirectly with $?.
- SC2004: $/${} is unnecessary on arithmetic variables.
- SC2155: Declare and assign separately to avoid masking return
values.
- SC2166: Prefer [ p ] && [ q ] as [ p -a q ] is not well defined.
- SC2059: Don't use variables in the printf format string. Use printf
'..%s..' "$foo".
Now this script is shellcheck (0.9.0) compliant. We can easily spot new
issues.
Reviewed-by: Mat Martineau <[email protected]>
Signed-off-by: Matthieu Baerts (NGI0) <[email protected]>
Link: https://lore.kernel.org/r/20240306-upstream-net-next-20240304-selftests-mptcp-shared-code-shellcheck-v2-8-bc79e6e5e6a0@kernel.org
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
shellcheck recently helped to prevent issues. It is then good to fix the
other harmless issues in order to spot "real" ones later.
Here, two categories of warnings are now ignored:
- SC2317: Command appears to be unreachable. The cleanup() function is
invoked indirectly via the EXIT trap.
- SC2086: Double quote to prevent globbing and word splitting. This is
recommended, but the current usage is correct and there is no need to
do all these modifications to be compliant with this rule.
For the modifications:
- SC2034: ksft_skip appears unused.
- SC2046: Quote '$(get_msk_inuse)' to prevent word splitting.
- SC2006: Use $(...) notation instead of legacy backticks `...`.
Now this script is shellcheck (0.9.0) compliant. We can easily spot new
issues.
Reviewed-by: Mat Martineau <[email protected]>
Signed-off-by: Matthieu Baerts (NGI0) <[email protected]>
Link: https://lore.kernel.org/r/20240306-upstream-net-next-20240304-selftests-mptcp-shared-code-shellcheck-v2-7-bc79e6e5e6a0@kernel.org
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
To avoid duplicated code in different MPTCP selftests, we can add and
use helpers defined in mptcp_lib.sh.
This patch unifies "pm_nl_ctl events" related code in userspace_pm.sh
and mptcp_join.sh into a helper mptcp_lib_events(). Define it in
mptcp_lib.sh and use it in both scripts.
Note that mptcp_lib_kill_wait is now call before starting 'events' for
mptcp_join.sh as well, but that's fine: each test is started from a new
netns, so there will not be any existing pid there, and nothing is done
when mptcp_lib_kill_wait is called with 0.
Signed-off-by: Geliang Tang <[email protected]>
Reviewed-by: Matthieu Baerts (NGI0) <[email protected]>
Signed-off-by: Matthieu Baerts (NGI0) <[email protected]>
Link: https://lore.kernel.org/r/20240306-upstream-net-next-20240304-selftests-mptcp-shared-code-shellcheck-v2-6-bc79e6e5e6a0@kernel.org
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
Set more the default sysctl values in mptcp_lib_ns_init(). It is fine to
do that everywhere, because they could be overridden latter if needed.
mptcp_lib_ns_exit() now also try to remove temp netns files used for the
stats even for selftests not using them. That's fine to do that because
these files have a unique name.
Signed-off-by: Geliang Tang <[email protected]>
Reviewed-by: Matthieu Baerts (NGI0) <[email protected]>
Signed-off-by: Matthieu Baerts (NGI0) <[email protected]>
Link: https://lore.kernel.org/r/20240306-upstream-net-next-20240304-selftests-mptcp-shared-code-shellcheck-v2-5-bc79e6e5e6a0@kernel.org
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
Add helpers mptcp_lib_ns_init() and mptcp_lib_ns_exit() in mptcp_lib.sh
to initialize and delete the given namespaces. Then every test script
can invoke these helpers and use all namespaces.
Signed-off-by: Geliang Tang <[email protected]>
Reviewed-by: Matthieu Baerts (NGI0) <[email protected]>
Signed-off-by: Matthieu Baerts (NGI0) <[email protected]>
Link: https://lore.kernel.org/r/20240306-upstream-net-next-20240304-selftests-mptcp-shared-code-shellcheck-v2-4-bc79e6e5e6a0@kernel.org
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
This patch adds local variables rndh in do_transfer() functions both in
mptcp_connect.sh and simult_flows.sh, setting it with ${ns1:4}, not the
global variable rndh. The global one is hidden in the next commit.
Signed-off-by: Geliang Tang <[email protected]>
Reviewed-by: Matthieu Baerts (NGI0) <[email protected]>
Signed-off-by: Matthieu Baerts (NGI0) <[email protected]>
Link: https://lore.kernel.org/r/20240306-upstream-net-next-20240304-selftests-mptcp-shared-code-shellcheck-v2-3-bc79e6e5e6a0@kernel.org
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
This patch exports check_tools() helper from mptcp_join.sh into
mptcp_lib.sh as a public one mptcp_lib_check_tools(). The arguments
"ip", "ss", "iptables" and "ip6tables" are passed into this helper
to indicate whether to check ip tool, ss tool, iptables and ip6tables
tools.
This helper can be used in every scripts.
Signed-off-by: Geliang Tang <[email protected]>
Reviewed-by: Matthieu Baerts (NGI0) <[email protected]>
Signed-off-by: Matthieu Baerts (NGI0) <[email protected]>
Link: https://lore.kernel.org/r/20240306-upstream-net-next-20240304-selftests-mptcp-shared-code-shellcheck-v2-2-bc79e6e5e6a0@kernel.org
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
Commit 0c4cd3f86a40 ("selftests: mptcp: join: use 'iptables-legacy' if
available") and commit a5a5990c099d ("selftests: mptcp: sockopt: use
'iptables-legacy' if available") forced using iptables-legacy if
available.
This was needed because of some issues that were visible when testing
the kselftests on a v5.15.x with iptables-nft as default backend. It
looks like these errors are no longer present. As mentioned by Pablo [1],
the errors were maybe due to missing kernel config. We can then use
iptables-nft if it is the default one, instead of using a legacy tool.
We can then check the variables iptables and ip6tables are valid. We can
keep the variables to easily change it later or add options.
Link: https://lore.kernel.org/netdev/ZbFiixyMFpQnxzCH@calendula/ [1]
Suggested-by: Pablo Neira Ayuso <[email protected]>
Reviewed-by: Mat Martineau <[email protected]>
Signed-off-by: Matthieu Baerts (NGI0) <[email protected]>
Link: https://lore.kernel.org/r/20240306-upstream-net-next-20240304-selftests-mptcp-shared-code-shellcheck-v2-1-bc79e6e5e6a0@kernel.org
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
ipv6_gc fails occasionally. According to the study, fib6_run_gc() using
jiffies_round() to round the GC interval could increase the waiting time up
to 750ms (3/4 seconds). The timer has a granularity of 512ms at the range
4s to 32s. That means a route with an expiration time E seconds can wait
for more than E * 2 + 1 seconds if the GC interval is also E seconds.
E * 2 + 2 seconds should be enough for waiting for removing routes.
Also remove a check immediately after replacing 5 routes since it is very
likely to remove some of routes before completing the last route with a
slow environment.
Signed-off-by: Kui-Feng Lee <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
The nlctrl genetlink-legacy family uses nest-type-value encoding as
described in Documentation/userspace-api/netlink/genetlink-legacy.rst
Add nest-type-value decoding to ynl.
Signed-off-by: Donald Hunter <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|