| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
This adds test cases for ptrace deadlocks.
Additionally fixes a compile problem in get_syscall_info.c,
observed with gcc-4.8.4:
get_syscall_info.c: In function 'get_syscall_info':
get_syscall_info.c:93:3: error: 'for' loop initial declarations are only
allowed in C99 mode
for (unsigned int i = 0; i < ARRAY_SIZE(args); ++i) {
^
get_syscall_info.c:93:3: note: use option -std=c99 or -std=gnu99 to compile
your code
Signed-off-by: Bernd Edlinger <[email protected]>
Reviewed-by: Kees Cook <[email protected]>
Signed-off-by: Eric W. Biederman <[email protected]>
|
|
Pablo Neira Ayuso says:
====================
Netfilter fixes for net
The following patchset contains Netfilter fixes for net:
1) A new selftest for nf_queue, from Florian Westphal. This test
covers two recent fixes: 07f8e4d0fddb ("tcp: also NULL skb->dev
when copy was needed") and b738a185beaa ("tcp: ensure skb->dev is
NULL before leaving TCP stack").
2) The fwd action breaks with ifb. For safety in next extensions,
make sure the fwd action only runs from ingress until it is extended
to be used from a different hook.
3) The pipapo set type now reports EEXIST in case of subrange overlaps.
Update the rbtree set to validate range overlaps, so far this
validation is only done only from userspace. From Stefano Brivio.
====================
Signed-off-by: David S. Miller <[email protected]>
|
|
Add a test case to check nf queue infrastructure.
Could be extended in the future to also cover serialization of
conntrack, uid and secctx attributes in nfqueue.
For now, this checks that 'queue bypass' works, that a queue rule with
no bypass option blocks traffic and that userspace receives the expected
number of packets.
For this we add two queues and hook all of
prerouting/input/forward/output/postrouting.
Packets get queued twice with a dummy base chain in between:
This passes with current nf tree, but reverting
commit 946c0d8e6ed4 ("netfilter: nf_queue: fix reinject verdict handling")
makes this trip (it processes 30 instead of expected 20 packets).
v2: update config file with queue and other options missing/needed for
other tests.
v3: also test with tcp, this reveals problem with commit
28f8bfd1ac94 ("netfilter: Support iif matches in POSTROUTING"), due to
skb->dev pointing at another skb in the retransmit rbtree (skb->dev
aliases to rbnode child).
Signed-off-by: Florian Westphal <[email protected]>
Signed-off-by: Pablo Neira Ayuso <[email protected]>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull perf tooling fixes from Ingo Molnar:
"A handful of tooling fixes all across the map, no kernel changes"
* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
tools headers uapi: Update linux/in.h copy
perf probe: Do not depend on dwfl_module_addrsym()
perf probe: Fix to delete multiple probe event
perf parse-events: Fix reading of invalid memory in event parsing
perf python: Fix clang detection when using CC=clang-version
perf map: Fix off by one in strncpy() size argument
tools: Let O= makes handle a relative path with -C option
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu into core/rcu
Pull RCU changes from Paul E. McKenney:
- Make kfree_rcu() use kfree_bulk() for added performance
- RCU updates
- Callback-overload handling updates
- Tasks-RCU KCSAN and sparse updates
- Locking torture test and RCU torture test updates
- Documentation updates
- Miscellaneous fixes
Signed-off-by: Ingo Molnar <[email protected]>
|
|
Add missing Makefile for net/forwarding tests and include it to
the targets list, otherwise forwarding tests are not installed
in case of cross-compilation.
Signed-off-by: Vadym Kochan <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
The kunit.py utility builds an ARCH=um kernel and then runs it. Add
optional --make_options flag to kunit.py allowing for the operator to
specify extra build options.
This allows use of the clang compiler for kunit:
tools/testing/kunit/kunit.py run --defconfig \
--make_options CC=clang --make_options HOSTCC=clang
Signed-off-by: Greg Thelen <[email protected]>
Reviewed-by: Brendan Higgins <[email protected]>
Reviewed-by: Nathan Chancellor <[email protected]>
Tested-by: David Gow <[email protected]>
Signed-off-by: Brendan Higgins <[email protected]>
Signed-off-by: Shuah Khan <[email protected]>
|
|
To reduce the reliance of trace samples (trace*_user) on bpf_load,
move read_trace_pipe to trace_helpers. By moving this bpf_loader helper
elsewhere, trace functions can be easily migrated to libbbpf.
Signed-off-by: Daniel T. Lee <[email protected]>
Signed-off-by: Daniel Borkmann <[email protected]>
Acked-by: Andrii Nakryiko <[email protected]>
Link: https://lore.kernel.org/bpf/[email protected]
|
|
This patch adds test to exercise the bpf_sk_storage_get()
and bpf_sk_storage_delete() helper from the bpf_dctcp.c.
The setup and check on the sk_storage is done immediately
before and after the connect().
This patch also takes this chance to move the pthread_create()
after the connect() has been done. That will remove the need of
the "wait_thread" label.
Signed-off-by: Martin KaFai Lau <[email protected]>
Signed-off-by: Daniel Borkmann <[email protected]>
Acked-by: Yonghong Song <[email protected]>
Link: https://lore.kernel.org/bpf/[email protected]
|
|
Add an alternative format that can be more easily used for further
processing later on.
Note that we add a timestamp in the first column for both, the regular
and the new csv format.
Signed-off-by: Stefan Raspl <[email protected]>
Message-Id: <[email protected]>
Signed-off-by: Paolo Bonzini <[email protected]>
|
|
This now controls both, the refresh rate of the interactive mode as well
as the logging mode. Which, as a consequence, means that the default of
logging mode is now 3s, too (use command line switch '-s' to adjust to
your liking).
Signed-off-by: Stefan Raspl <[email protected]>
Message-Id: <[email protected]>
Signed-off-by: Paolo Bonzini <[email protected]>
|
|
optparse is deprecated for a while, hence switching over to argparse
(which also works with python2).
As a consequence, help output has some subtle changes, the most
significant one being that the options are all listed explicitly
instead of a universal '[options]' indicator. Also, some of the error
messages are phrased slightly different.
While at it, squashed a number of minor PEP8 issues.
Signed-off-by: Stefan Raspl <[email protected]>
Message-Id: <[email protected]>
Signed-off-by: Paolo Bonzini <[email protected]>
|
|
Make sure command line arguments are sorted alphabetically
everywhere, and adjusted existing texts for interactive command 's' to
become consistent with the long form --set-delay.
Throwing in some PEP8 fixes (all cosmetics) for good measure.
Signed-off-by: Stefan Raspl <[email protected]>
Message-Id: <[email protected]>
Signed-off-by: Paolo Bonzini <[email protected]>
|
|
libc
Many systems build/test up-to-date kernels with older libcs, and
an older glibc (2.17) lacks the definition of SOL_DCCP in
/usr/include/bits/socket.h (it was added in the 4.6 timeframe).
Adding the definition to the test program avoids a compilation
failure that gets in the way of building tools/testing/selftests/net.
The test itself will work once the definition is added; either
skipping due to DCCP not being configured in the kernel under test
or passing, so there are no other more up-to-date glibc dependencies
here it seems beyond that missing definition.
Fixes: 11fb60d1089f ("selftests: net: reuseport_addr_any: add DCCP")
Signed-off-by: Alan Maguire <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
Statistics on timestamps is useful to quantify average and tail latency.
Print timestamp statistics in count/avg/min/max format.
Signed-off-by: Jian Yang <[email protected]>
Acked-by: Willem de Bruijn <[email protected]>
Acked-by: Soheil Hassas Yeganeh <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
Add the following new flags:
-e: use level-triggered epoll() instead of poll().
-E: use event-triggered epoll() instead of poll().
Signed-off-by: Jian Yang <[email protected]>
Acked-by: Willem de Bruijn <[email protected]>
Acked-by: Soheil Hassas Yeganeh <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
A longer sleep duration between sendmsg()s makes more cachelines to be
evicted and results in higher latency. Making the duration configurable.
Add the following new flags:
-S: Configurable sleep duration.
-b: Busy loop instead of poll().
Remove the following flag:
-D: No delay between packets: subsumed by -S.
Signed-off-by: Jian Yang <[email protected]>
Acked-by: Willem de Bruijn <[email protected]>
Acked-by: Soheil Hassas Yeganeh <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
Txtimestamp reports latencies in uses resolution, while nsec is needed
in cases such as measuring latencies on localhost.
Add the following new flag:
-N: print timestamps and durations in nsec (instead of usec)
Signed-off-by: Jian Yang <[email protected]>
Acked-by: Willem de Bruijn <[email protected]>
Acked-by: Soheil Hassas Yeganeh <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
The wrapper script txtimestamp.sh executes a pre-defined list of testcases
sequentially without configuration options available.
Add an option (-r/--run) to setup the test namespace and pass remaining
arguments to txtimestamp binary. The script still runs all tests when no
argument is passed.
Signed-off-by: Jian Yang <[email protected]>
Acked-by: Willem de Bruijn <[email protected]>
Acked-by: Soheil Hassas Yeganeh <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
'kfree_rcu.2020.02.20a', 'locktorture.2020.02.20a', 'ovld.2020.02.20a', 'rcu-tasks.2020.02.20a', 'srcu.2020.02.20a' and 'torture.2020.02.20a' into HEAD
doc.2020.02.27a: Documentation updates.
fixes.2020.03.21a: Miscellaneous fixes.
kfree_rcu.2020.02.20a: Updates to kfree_rcu().
locktorture.2020.02.20a: Lock torture-test updates.
ovld.2020.02.20a: Updates to callback-overload handling.
rcu-tasks.2020.02.20a: RCU-tasks updates.
srcu.2020.02.20a: SRCU updates.
torture.2020.02.20a: Torture-test updates.
|
|
Continue what commit:
d820ac4c2fa8 ("locking: rename trace_softirq_[enter|exit] => lockdep_softirq_[enter|exit]")
started, rename these to avoid confusing them with tracepoints.
git grep -l "trace_\(soft\|hard\)\(irq_context\|irqs_enabled\)" | while read file;
do
sed -ie 's/trace_\(soft\|hard\)\(irq_context\|irqs_enabled\)/lockdep_\1\2/g' $file;
done
Reported-by: Thomas Gleixner <[email protected]>
Signed-off-by: Peter Zijlstra (Intel) <[email protected]>
Signed-off-by: Thomas Gleixner <[email protected]>
Reviewed-by: Thomas Gleixner <[email protected]>
Acked-by: Will Deacon <[email protected]>
Link: https://lkml.kernel.org/r/[email protected]
|
|
Continue what commit:
d820ac4c2fa8 ("locking: rename trace_softirq_[enter|exit] => lockdep_softirq_[enter|exit]")
started, rename these to avoid confusing them with tracepoints.
Signed-off-by: Thomas Gleixner <[email protected]>
Reviewed-by: Thomas Gleixner <[email protected]>
Acked-by: Will Deacon <[email protected]>
Link: https://lkml.kernel.org/r/[email protected]
|
|
A stitch in time saves nine.
Signed-off-by: Len Brown <[email protected]>
|
|
Print cpuidle driver and governor.
Originally-by: Antti Laakso <[email protected]>
Signed-off-by: Len Brown <[email protected]>
|
|
Implemented the functionality to run all KUnit tests through kunit_tool
by specifying an --alltests flag, which builds UML with allyesconfig
enabled, and consequently runs every KUnit test. A new function was
added to kunit_kernel: make_allyesconfig.
Firstly, if --alltests is specified, kunit.py triggers build_um_kernel
which call make_allyesconfig. This function calls the make command,
disables the broken configs that would otherwise prevent UML from
building, then starts the kernel with all possible configurations
enabled. All stdout and stderr is sent to test.log and read from there
then fed through kunit_parser to parse the tests to the user. Also added
a signal_handler in case kunit is interrupted while running.
Tested: Run under different conditions such as testing with
--raw_output, testing program interrupt then immediately running kunit
again without --alltests and making sure to clean the console.
Signed-off-by: Heidi Fahim <[email protected]>
Reviewed-by: Brendan Higgins <[email protected]>
Signed-off-by: Shuah Khan <[email protected]>
|
|
Previously, kunit_parser did not properly handle kunit TAP output that
- had any prefixes (generated from different configs e.g.
CONFIG_PRINTK_TIME)
- had unrelated kernel output mixed in the middle of
it, which has shown up when testing with allyesconfig
To remove prefixes, the parser looks for the first line that includes
TAP output, "TAP version 14". It then determines the length of the
string before this sequence, and strips that number of characters off
the beginning of the following lines until the last KUnit output line is
reached.
These fixes have been tested with additional tests in the
KUnitParseTest and their associated logs have also been added.
Signed-off-by: Heidi Fahim <[email protected]>
Reviewed-by: Brendan Higgins <[email protected]>
Signed-off-by: Shuah Khan <[email protected]>
|
|
Clang's -Wmisleading-indentation warns about misleading indentations if
there's a mixture of spaces and tabs. Remove extraneous spaces.
Signed-off-by: Bill Wendling <[email protected]>
Signed-off-by: Daniel Borkmann <[email protected]>
Link: https://lore.kernel.org/bpf/[email protected]
|
|
This patch adds struct_ops support to the bpftool.
To recap a bit on the recent bpf_struct_ops feature on the kernel side:
It currently supports "struct tcp_congestion_ops" to be implemented
in bpf. At a high level, bpf_struct_ops is struct_ops map populated
with a number of bpf progs. bpf_struct_ops currently supports the
"struct tcp_congestion_ops". However, the bpf_struct_ops design is
generic enough that other kernel struct ops can be supported in
the future.
Although struct_ops is map+progs at a high lever, there are differences
in details. For example,
1) After registering a struct_ops, the struct_ops is held by the kernel
subsystem (e.g. tcp-cc). Thus, there is no need to pin a
struct_ops map or its progs in order to keep them around.
2) To iterate all struct_ops in a system, it iterates all maps
in type BPF_MAP_TYPE_STRUCT_OPS. BPF_MAP_TYPE_STRUCT_OPS is
the current usual filter. In the future, it may need to
filter by other struct_ops specific properties. e.g. filter by
tcp_congestion_ops or other kernel subsystem ops in the future.
3) struct_ops requires the running kernel having BTF info. That allows
more flexibility in handling other kernel structs. e.g. it can
always dump the latest bpf_map_info.
4) Also, "struct_ops" command is not intended to repeat all features
already provided by "map" or "prog". For example, if there really
is a need to pin the struct_ops map, the user can use the "map" cmd
to do that.
While the first attempt was to reuse parts from map/prog.c, it ended up
not a lot to share. The only obvious item is the map_parse_fds() but
that still requires modifications to accommodate struct_ops map specific
filtering (for the immediate and the future needs). Together with the
earlier mentioned differences, it is better to part away from map/prog.c.
The initial set of subcmds are, register, unregister, show, and dump.
For register, it registers all struct_ops maps that can be found in an
obj file. Option can be added in the future to specify a particular
struct_ops map. Also, the common bpf_tcp_cc is stateless (e.g.
bpf_cubic.c and bpf_dctcp.c). The "reuse map" feature is not
implemented in this patch and it can be considered later also.
For other subcmds, please see the man doc for details.
A sample output of dump:
[root@arch-fb-vm1 bpf]# bpftool struct_ops dump name cubic
[{
"bpf_map_info": {
"type": 26,
"id": 64,
"key_size": 4,
"value_size": 256,
"max_entries": 1,
"map_flags": 0,
"name": "cubic",
"ifindex": 0,
"btf_vmlinux_value_type_id": 18452,
"netns_dev": 0,
"netns_ino": 0,
"btf_id": 52,
"btf_key_type_id": 0,
"btf_value_type_id": 0
}
},{
"bpf_struct_ops_tcp_congestion_ops": {
"refcnt": {
"refs": {
"counter": 1
}
},
"state": "BPF_STRUCT_OPS_STATE_INUSE",
"data": {
"list": {
"next": 0,
"prev": 0
},
"key": 0,
"flags": 0,
"init": "void (struct sock *) bictcp_init/prog_id:138",
"release": "void (struct sock *) 0",
"ssthresh": "u32 (struct sock *) bictcp_recalc_ssthresh/prog_id:141",
"cong_avoid": "void (struct sock *, u32, u32) bictcp_cong_avoid/prog_id:140",
"set_state": "void (struct sock *, u8) bictcp_state/prog_id:142",
"cwnd_event": "void (struct sock *, enum tcp_ca_event) bictcp_cwnd_event/prog_id:139",
"in_ack_event": "void (struct sock *, u32) 0",
"undo_cwnd": "u32 (struct sock *) tcp_reno_undo_cwnd/prog_id:144",
"pkts_acked": "void (struct sock *, const struct ack_sample *) bictcp_acked/prog_id:143",
"min_tso_segs": "u32 (struct sock *) 0",
"sndbuf_expand": "u32 (struct sock *) 0",
"cong_control": "void (struct sock *, const struct rate_sample *) 0",
"get_info": "size_t (struct sock *, u32, int *, union tcp_cc_info *) 0",
"name": "bpf_cubic",
"owner": 0
}
}
}
]
Signed-off-by: Martin KaFai Lau <[email protected]>
Signed-off-by: Daniel Borkmann <[email protected]>
Acked-by: Quentin Monnet <[email protected]>
Link: https://lore.kernel.org/bpf/[email protected]
|
|
The kernel struct_ops obj has kernel's func ptrs implemented by bpf_progs.
The bpf prog_id is stored as the value of the func ptr for introspection
purpose. In the latter patch, a struct_ops dump subcmd will be added
to introspect these func ptrs. It is desired to print the actual bpf
prog_name instead of only printing the prog_id.
Since struct_ops is the only usecase storing prog_id in the func ptr,
this patch adds a prog_id_as_func_ptr bool (default is false) to
"struct btf_dumper" in order not to mis-interpret the ptr value
for the other existing use-cases.
While printing a func_ptr as a bpf prog_name,
this patch also prefix the bpf prog_name with the ptr's func_proto.
[ Note that it is the ptr's func_proto instead of the bpf prog's
func_proto ]
It reuses the current btf_dump_func() to obtain the ptr's func_proto
string.
Here is an example from the bpf_cubic.c:
"void (struct sock *, u32, u32) bictcp_cong_avoid/prog_id:140"
Signed-off-by: Martin KaFai Lau <[email protected]>
Signed-off-by: Daniel Borkmann <[email protected]>
Acked-by: Quentin Monnet <[email protected]>
Link: https://lore.kernel.org/bpf/[email protected]
|
|
A char[] is currently printed as an integer array.
This patch will print it as a string when
1) The array element type is an one byte int
2) The array element type has a BTF_INT_CHAR encoding or
the array element type's name is "char"
3) All characters is between (0x1f, 0x7f) and it is terminated
by a null character.
Signed-off-by: Martin KaFai Lau <[email protected]>
Signed-off-by: Daniel Borkmann <[email protected]>
Acked-by: Andrii Nakryiko <[email protected]>
Acked-by: Quentin Monnet <[email protected]>
Link: https://lore.kernel.org/bpf/[email protected]
|
|
This patch prints the enum's name if there is one found in
the array of btf_enum.
The commit 9eea98497951 ("bpf: fix BTF verification of enums")
has details about an enum could have any power-of-2 size (up to 8 bytes).
This patch also takes this chance to accommodate these non 4 byte
enums.
Signed-off-by: Martin KaFai Lau <[email protected]>
Signed-off-by: Daniel Borkmann <[email protected]>
Acked-by: Quentin Monnet <[email protected]>
Link: https://lore.kernel.org/bpf/[email protected]
|
|
Add tests cases for checking the new firmware_request_platform api.
Signed-off-by: Hans de Goede <[email protected]>
Acked-by: Luis Chamberlain <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
This patch fix a spelling typo in error message.
Signed-off-by: Masanari Iida <[email protected]>
Signed-off-by: Andy Shevchenko <[email protected]>
|
|
Fair number of changes including bug fixes done to change version.
Signed-off-by: Srinivas Pandruvada <[email protected]>
Signed-off-by: Andy Shevchenko <[email protected]>
|
|
For platforms where multiple packages/die, this makes "Package-" key
duplicate. To make unique, add die and cpu id to key name.
So "Package-0" key name will change to "Package-0-die-x:cpu-x".
For example:
$sudo ./intel-speed-select -f json perf-profile info
Intel(R) Speed Select Technology
Executing on CPU model:106[0x6a]
{
"package-0:die-0:cpu-0": {
"perf-profile-level-0": {
"cpu-count": "32",
"enable-cpu-count": "32",
...
...
"package-1:die-0:cpu-16": {
"perf-profile-level-0": {
"cpu-count": "32",
"enable-cpu-count": "32",
"enable-cpu-mask": "ffff0000,ffff0000",
...
...
For non json format, there is no change. Here when print_package_info()
is called, it will return the level to print for other information.
This level is used formatting. Also in some function duplicate code
was there to print package,die and CPU information. Replace all that
code with a call to print_package_info().
Signed-off-by: Srinivas Pandruvada <[email protected]>
Signed-off-by: Andy Shevchenko <[email protected]>
|
|
In addition to total CPU count also display "enabled-cpu-count" for
perf-profile info command. This will show number of CPUs in the
"enable-cpu-mask".
For example:
perf-profile-level-4
cpu-count:32
enable-cpu-count:16
enable-cpu-mask:e42d0000,e42d0000
Signed-off-by: Srinivas Pandruvada <[email protected]>
Signed-off-by: Andy Shevchenko <[email protected]>
|
|
When user specifies invalid option, display "Unknown Option: ignore",
instead of "no match". Also display error for garbage on the command
line.
Signed-off-by: Srinivas Pandruvada <[email protected]>
Signed-off-by: Andy Shevchenko <[email protected]>
|
|
Specifying "avx2" and "avx512" option for display filter doesn't work
with short option "-r", only works with --try-type. Also compare full
6 characters for "avx512" string.
Signed-off-by: Srinivas Pandruvada <[email protected]>
Signed-off-by: Andy Shevchenko <[email protected]>
|
|
CLX doesn't have capability to change the feature in the hardware, but
this acts as "--auto | -a" option. So even if user didn't specify the
option, use this as --auto | -a to set cpufreq scaling frequency limits.
Also remove perror with debug_printf as they don't bring any value.
Signed-off-by: Srinivas Pandruvada <[email protected]>
Signed-off-by: Andy Shevchenko <[email protected]>
|
|
When --cpu or -c is used to specify target CPUs and non of them are valid,
display error.
Signed-off-by: Srinivas Pandruvada <[email protected]>
Signed-off-by: Andy Shevchenko <[email protected]>
|
|
This change adds improved error display and handling for commands related
to core-power feature. The changes include:
- Replace perror with helpful error message
- Use ordered priority for SKX based platform by default as the
proportional priority is not supported
- Don't show weight and epp in help and also give error when user
tries to set them in SKX based platforms
- Range check for epp and weights and display error
Signed-off-by: Srinivas Pandruvada <[email protected]>
Signed-off-by: Andy Shevchenko <[email protected]>
|
|
Treat a case when mailbox/mmio command can't be handled by the kernel
drivers when the module is removed or send a command which no driver can
handle. In this case ENOTTY result is returned, so print error.
Also when the isst_if_mmio module is removed, we can't send CLOS message
messages via Mailbox on non SKX based platforms. When this module is
removed, isst_platform_info.mmio_supported is set to 0. So it can't be
used as a condition to send via mailbox. Here replace check for Skylake
based platform to send via mailbox, other platforms can't use mailbox in
lieu of MMIO.
Signed-off-by: Srinivas Pandruvada <[email protected]>
Signed-off-by: Andy Shevchenko <[email protected]>
|
|
This change adds improved error display and handling for commands related
to turbo-freq feature. The changes include:
- Replace perror/fprintf with helpful error message
- Error for not specifying TDP level when required
- Show error for invalid bucket number
- Show message to enable core-power before enabling turbo-freq feature
Signed-off-by: Srinivas Pandruvada <[email protected]>
Signed-off-by: Andy Shevchenko <[email protected]>
|
|
This change adds improved error display and handling for commands related
to base-freq feature. The changes include:
- Replace perror/fprintf with helpful error message
- Error for not specifying TDP level when required
- For CLX show help which shows limitation
Signed-off-by: Srinivas Pandruvada <[email protected]>
Signed-off-by: Andy Shevchenko <[email protected]>
|
|
Improve output of perf-profile commands:
get-config-enabled
get-lock-status
Instead of showing 0/1, show meaningful strings. Also show error when
command is failed.
Signed-off-by: Srinivas Pandruvada <[email protected]>
Signed-off-by: Andy Shevchenko <[email protected]>
|
|
Enhance help to specify CPU and clos by an example.
Signed-off-by: Srinivas Pandruvada <[email protected]>
Signed-off-by: Andy Shevchenko <[email protected]>
|
|
When priority type for core-power enable command is anything more than 1
display error before change to 1, which is ordered priority.
Signed-off-by: Srinivas Pandruvada <[email protected]>
Signed-off-by: Andy Shevchenko <[email protected]>
|
|
Before looking for information about the base-freq or turbo-freq details,
first check if the feature is supported at that level. If not print error
and return.
Signed-off-by: Srinivas Pandruvada <[email protected]>
Signed-off-by: Andy Shevchenko <[email protected]>
|
|
feature
This change adds improved error display and handling for commands related
to perf-profile feature. The changes include:
- When invalid TDP level is passed. display error and exit
- Replace perror with helpful error message
- Show error when TDP level can't be set
- Print error when information can't be read for a level
- Validate user options for invalid level
- Display error for TDP lock status
Signed-off-by: Srinivas Pandruvada <[email protected]>
Signed-off-by: Andy Shevchenko <[email protected]>
|
|
Add a common API which can be used to print all error and information
messages. In this way a common format can be used.
For json output an error index in suffixed to make unique error key.
Signed-off-by: Srinivas Pandruvada <[email protected]>
Signed-off-by: Andy Shevchenko <[email protected]>
|