| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Since 2005 glibc has passed argc, argv, and envp to all constructors.
As it is cheap and easy to do so, mirror that behaviour in nolibc.
This makes it easier to migrate applications to nolibc.
Link: https://lore.kernel.org/r/20240728-nolibc-constructor-args-v1-1-36d0bf5cd4c0@weissschuh.net
Signed-off-by: Thomas Weißschuh <[email protected]>
|
|
Add tests to set TCP sockopt TCP_BPF_SOCK_OPS_CB_FLAGS via
bpf_setsockopt() and use a cgroup/getsockopt program to retrieve
the value to verify it was set.
Signed-off-by: Alan Maguire <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Martin KaFai Lau <[email protected]>
|
|
Currently the only opportunity to set sock ops flags dictating
which callbacks fire for a socket is from within a TCP-BPF sockops
program. This is problematic if the connection is already set up
as there is no further chance to specify callbacks for that socket.
Add TCP_BPF_SOCK_OPS_CB_FLAGS to bpf_setsockopt() and bpf_getsockopt()
to allow users to specify callbacks later, either via an iterator
over sockets or via a socket-specific program triggered by a
setsockopt() on the socket.
Previous discussion on this here [1].
[1] https://lore.kernel.org/bpf/[email protected]/
Signed-off-by: Alan Maguire <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Martin KaFai Lau <[email protected]>
|
|
Cross-merge networking fixes after downstream PR.
No conflicts or adjacent changes.
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Including fixes from bluetooth.
Current release - regressions:
- eth: bnxt_en: fix memory out-of-bounds in bnxt_fill_hw_rss_tbl() on
older chips
Current release - new code bugs:
- ethtool: fix off-by-one error / kdoc contradicting the code for max
RSS context IDs
- Bluetooth: hci_qca:
- QCA6390: fix support on non-DT platforms
- QCA6390: don't call pwrseq_power_off() twice
- fix a NULL-pointer derefence at shutdown
- eth: ice: fix incorrect assigns of FEC counters
Previous releases - regressions:
- mptcp: fix handling endpoints with both 'signal' and 'subflow'
flags set
- virtio-net: fix changing ring count when vq IRQ coalescing not
supported
- eth: gve: fix use of netif_carrier_ok() during reconfig / reset
Previous releases - always broken:
- eth: idpf: fix bugs in queue re-allocation on reconfig / reset
- ethtool: fix context creation with no parameters
Misc:
- linkwatch: use system_unbound_wq to ease RTNL contention"
* tag 'net-6.11-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (41 commits)
net: dsa: microchip: disable EEE for KSZ8567/KSZ9567/KSZ9896/KSZ9897.
ethtool: Fix context creation with no parameters
net: ethtool: fix off-by-one error in max RSS context IDs
net: pse-pd: tps23881: include missing bitfield.h header
net: fec: Stop PPS on driver remove
net: bcmgenet: Properly overlay PHY and MAC Wake-on-LAN capabilities
l2tp: fix lockdep splat
net: stmmac: dwmac4: fix PCS duplex mode decode
idpf: fix UAFs when destroying the queues
idpf: fix memleak in vport interrupt configuration
idpf: fix memory leaks and crashes while performing a soft reset
bnxt_en : Fix memory out-of-bounds in bnxt_fill_hw_rss_tbl()
net: dsa: bcm_sf2: Fix a possible memory leak in bcm_sf2_mdio_register()
net/smc: add the max value of fallback reason count
Bluetooth: hci_sync: avoid dup filtering when passive scanning with adv monitor
Bluetooth: l2cap: always unlock channel in l2cap_conless_channel()
Bluetooth: hci_qca: fix a NULL-pointer derefence at shutdown
Bluetooth: hci_qca: fix QCA6390 support on non-DT platforms
Bluetooth: hci_qca: don't call pwrseq_power_off() twice for QCA6390
ice: Fix incorrect assigns of FEC counts
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull misc fixes from Andrew Morton:
"Nine hotfixes. Five are cc:stable, the others either pertain to
post-6.10 material or aren't considered necessary for earlier kernels.
Five are MM and four are non-MM. No identifiable theme here - please
see the individual changelogs"
* tag 'mm-hotfixes-stable-2024-08-07-18-32' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm:
padata: Fix possible divide-by-0 panic in padata_mt_helper()
mailmap: update entry for David Heidelberg
memcg: protect concurrent access to mem_cgroup_idr
mm: shmem: fix incorrect aligned index when checking conflicts
mm: shmem: avoid allocating huge pages larger than MAX_PAGECACHE_ORDER for shmem
mm: list_lru: fix UAF for memory cgroup
kcov: properly check for softirq context
MAINTAINERS: Update LTP members and web
selftests: mm: add s390 to ARCH check
|
|
commit 0518dbe97fe6 ("selftests/mm: fix cross compilation with LLVM")
changed the env variable for the architecture from MACHINE to ARCH.
This is preventing 3 required TEST_GEN_FILES from being included when
cross compiling s390x and errors when trying to run the test suite. This
is due to the ARCH variable already being set and the arch folder name
being s390.
Add "s390" to the filtered list to cover this case and have the 3 files
included in the build.
Link: https://lkml.kernel.org/r/[email protected]
Fixes: 0518dbe97fe6 ("selftests/mm: fix cross compilation with LLVM")
Signed-off-by: Nico Pache <[email protected]>
Cc: Mark Brown <[email protected]>
Cc: Albert Ou <[email protected]>
Cc: Palmer Dabbelt <[email protected]>
Cc: Paul Walmsley <[email protected]>
Cc: Shuah Khan <[email protected]>
Cc: <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
|
|
A regression happened where running the ownership test passes on the first
iteration but fails running it a second time. This was caught and fixed,
but a later change brought it back. The regression was missed because the
automated tests only run the tests once per boot.
Change the ownership test to iterate through the tests twice, as this will
catch the regression with a single run.
Signed-off-by: Steven Rostedt (Google) <[email protected]>
Acked-by: Masami Hiramatsu (Google) <[email protected]>
Signed-off-by: Shuah Khan <[email protected]>
|
|
Add a basic uprobe testcase which checks whether add/remove/trace
operations works on /bin/sh.
Signed-off-by: Masami Hiramatsu (Google) <[email protected]>
Reviewed-by: Steven Rostedt (Google) <[email protected]>
Signed-off-by: Shuah Khan <[email protected]>
|
|
The ID register for S1PIE is ID_AA64MMFR3_EL1.S1PIE which is bits 11:8 but
get-reg-list uses a shift of 4, checking SCTLRX instead. Use a shift of 8
instead.
Fixes: 5f0419a0083b ("KVM: selftests: get-reg-list: add Permission Indirection registers")
Signed-off-by: Mark Brown <[email protected]>
Reviewed-by: Joey Gouly <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Oliver Upton <[email protected]>
|
|
To pick up changes from:
9ef54a384526 arm64: cputype: Add Cortex-A725 definitions
58d245e03c32 arm64: cputype: Add Cortex-X1C definitions
fd2ff5f0b320 arm64: cputype: Add Cortex-X925 definitions
add332c40328 arm64: cputype: Add Cortex-A720 definitions
be5a6f238700 arm64: cputype: Add Cortex-X3 definitions
This should be used to beautify x86 syscall arguments and it addresses
these tools/perf build warnings:
Warning: Kernel ABI header differences:
diff -u tools/arch/arm64/include/asm/cputype.h arch/arm64/include/asm/cputype.h
Please see tools/include/uapi/README for details (it's in the first patch
of this series).
Cc: Catalin Marinas <[email protected]>
Cc: Will Deacon <[email protected]>
Cc: [email protected]
Signed-off-by: Namhyung Kim <[email protected]>
|
|
To pick up changes from:
149fd4712bcd perf/x86/intel: Support Perfmon MSRs aliasing
21b362cc762a x86/resctrl: Enable shared RMID mode on Sub-NUMA Cluster (SNC) systems
4f460bff7b6a cpufreq: acpi: move MSR_K7_HWCR_CPB_DIS_BIT into msr-index.h
7ea81936b853 x86/cpufeatures: Add HWP highest perf change feature flag
78ce84b9e0a5 x86/cpufeatures: Flip the /proc/cpuinfo appearance logic
1beb348d5c7f x86/sev: Provide SVSM discovery support
This should be used to beautify x86 syscall arguments and it addresses
these tools/perf build warnings:
Warning: Kernel ABI header differences:
diff -u tools/arch/x86/include/asm/cpufeatures.h arch/x86/include/asm/cpufeatures.h
diff -u tools/arch/x86/include/asm/msr-index.h arch/x86/include/asm/msr-index.h
Please see tools/include/uapi/README for details (it's in the first patch
of this series).
Cc: Thomas Gleixner <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: Borislav Petkov <[email protected]>
Cc: Dave Hansen <[email protected]>
Cc: "H. Peter Anvin" <[email protected]>
Cc: [email protected]
Signed-off-by: Namhyung Kim <[email protected]>
|
|
To pick up changes from:
0f9ca80fa4f9 fs: Add initial atomic write support info to statx
f9af549d1fd3 fs: export mount options via statmount()
0a3deb11858a fs: Allow listmount() in foreign mount namespace
09b31295f833 fs: export the mount ns id via statmount
d04bccd8c19d listmount: allow listing in reverse order
bfc69fd05ef9 fs/procfs: add build ID fetching to PROCMAP_QUERY API
ed5d583a88a9 fs/procfs: implement efficient VMA querying API for /proc/<pid>/maps
This should be used to beautify FS syscall arguments and it addresses
these tools/perf build warnings:
Warning: Kernel ABI header differences:
diff -u tools/include/uapi/linux/stat.h include/uapi/linux/stat.h
diff -u tools/perf/trace/beauty/include/uapi/linux/fs.h include/uapi/linux/fs.h
diff -u tools/perf/trace/beauty/include/uapi/linux/mount.h include/uapi/linux/mount.h
diff -u tools/perf/trace/beauty/include/uapi/linux/stat.h include/uapi/linux/stat.h
Please see tools/include/uapi/README for details (it's in the first patch
of this series).
Cc: Alexander Viro <[email protected]>
Cc: Christian Brauner <[email protected]>
Cc: Jan Kara <[email protected]>
Cc: [email protected]
Signed-off-by: Namhyung Kim <[email protected]>
|
|
To pick up changes from:
d25a92ccae6b net/smc: Introduce IPPROTO_SMC
060f4ba6e403 io_uring/net: move charging socket out of zc io_uring
bb6aaf736680 net: Split a __sys_listen helper for io_uring
dc2e77979412 net: Split a __sys_bind helper for io_uring
This should be used to beautify socket syscall arguments and it addresses
these tools/perf build warnings:
Warning: Kernel ABI header differences:
diff -u tools/include/uapi/linux/in.h include/uapi/linux/in.h
diff -u tools/perf/trace/beauty/include/linux/socket.h include/linux/socket.h
Please see tools/include/uapi/README for details (it's in the first patch
of this series).
Cc: "David S. Miller" <[email protected]>
Cc: Eric Dumazet <[email protected]>
Cc: Jakub Kicinski <[email protected]>
Cc: Paolo Abeni <[email protected]>
Cc: [email protected]
Signed-off-by: Namhyung Kim <[email protected]>
|
|
And arch syscall tables to pick up changes from:
b1e31c134a8a powerpc: restore some missing spu syscalls
d3882564a77c syscalls: fix compat_sys_io_pgetevents_time64 usage
54233a425403 uretprobe: change syscall number, again
63ded110979b uprobe: Change uretprobe syscall scope and number
9142be9e6443 x86/syscall: Mark exit[_group] syscall handlers __noreturn
9aae1baa1c5d x86, arm: Add missing license tag to syscall tables files
5c28424e9a34 syscalls: Fix to add sys_uretprobe to syscall.tbl
190fec72df4a uprobe: Wire up uretprobe system call
This should be used to beautify syscall arguments and it addresses
these tools/perf build warnings:
Warning: Kernel ABI header differences:
diff -u tools/include/uapi/asm-generic/unistd.h include/uapi/asm-generic/unistd.h
diff -u tools/perf/arch/x86/entry/syscalls/syscall_64.tbl arch/x86/entry/syscalls/syscall_64.tbl
diff -u tools/perf/arch/powerpc/entry/syscalls/syscall.tbl arch/powerpc/kernel/syscalls/syscall.tbl
diff -u tools/perf/arch/s390/entry/syscalls/syscall.tbl arch/s390/kernel/syscalls/syscall.tbl
Please see tools/include/uapi/README for details (it's in the first patch
of this series).
Cc: Arnd Bergmann <[email protected]>
Cc: [email protected]
Signed-off-by: Namhyung Kim <[email protected]>
|
|
This commit adds the rcutree.nohz_full_patience_delay=1000 kernel boot
parameter to the TREE07 scenario, on the observation that "if it ain't
tested, it don't work".
Signed-off-by: "Paul E. McKenney" <[email protected]>
Signed-off-by: Neeraj Upadhyay <[email protected]>
|
|
To pick up changes from:
f05c1ffc2745 ALSA: pcm: reinvent the stream synchronization ID API
This should be used to beautify sound syscall arguments and it addresses
these tools/perf build warnings:
Warning: Kernel ABI header differences:
diff -u tools/perf/trace/beauty/include/uapi/sound/asound.h include/uapi/sound/asound.h
Please see tools/include/uapi/README for details (it's in the first patch
of this series).
Cc: Jaroslav Kysela <[email protected]>
Cc: Takashi Iwai <[email protected]>
Cc: [email protected]
Signed-off-by: Namhyung Kim <[email protected]>
|
|
To pick up changes from:
608f6976c309 perf/x86/intel: Support new data source for Lunar Lake
This should be used to beautify perf syscall arguments and it addresses
these tools/perf build warnings:
Warning: Kernel ABI header differences:
diff -u tools/include/uapi/linux/perf_event.h include/uapi/linux/perf_event.h
Please see tools/include/uapi/README for details (it's in the first patch
of this series).
Cc: Peter Zijlstra <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: Arnaldo Carvalho de Melo <[email protected]>
Cc: Mark Rutland <[email protected]>
Cc: Alexander Shishkin <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Ian Rogers <[email protected]>
Cc: Adrian Hunter <[email protected]>
Cc: "Liang, Kan" <[email protected]>
Cc: [email protected]
Signed-off-by: Namhyung Kim <[email protected]>
|
|
Now, __constructor_order is boolean; 1 for forward-order systems,
0 for backward-order systems while parsing __LIST_APPEND().
Change it into a bool variable, and rename it for clarification.
Signed-off-by: Masahiro Yamada <[email protected]>
Signed-off-by: Shuah Khan <[email protected]>
|
|
__constructor_order_last() is unneeded.
If __constructor_order_last() is not called on backward-order systems,
__constructor_order will remain 0 instead of being set to
_CONSTRUCTOR_ORDER_BACKWARD (= -1).
__LIST_APPEND() will still take the 'else' branch, so there is no
difference in the behavior.
Signed-off-by: Masahiro Yamada <[email protected]>
Signed-off-by: Shuah Khan <[email protected]>
|
|
And other arch-specific UAPI headers to pick up changes from:
4b23e0c199b2 KVM: Ensure new code that references immediate_exit gets extra scrutiny
85542adb65ec KVM: x86: Add KVM_RUN_X86_GUEST_MODE kvm_run flag
6fef518594bc KVM: x86: Add a capability to configure bus frequency for APIC timer
34ff65901735 x86/sev: Use kernel provided SVSM Calling Areas
5dcc1e76144f Merge tag 'kvm-x86-misc-6.11' of https://github.com/kvm-x86/linux into HEAD
9a0d2f4995dd KVM: PPC: Book3S HV: Add one-reg interface for HASHPKEYR register
e9eb790b2557 KVM: PPC: Book3S HV: Add one-reg interface for HASHKEYR register
1a1e6865f516 KVM: PPC: Book3S HV: Add one-reg interface for DEXCR register
This should be used to beautify KVM syscall arguments and it addresses
these tools/perf build warnings:
Warning: Kernel ABI header differences:
diff -u tools/include/uapi/linux/kvm.h include/uapi/linux/kvm.h
diff -u tools/arch/x86/include/uapi/asm/kvm.h arch/x86/include/uapi/asm/kvm.h
diff -u tools/arch/x86/include/uapi/asm/svm.h arch/x86/include/uapi/asm/svm.h
diff -u tools/arch/powerpc/include/uapi/asm/kvm.h arch/powerpc/include/uapi/asm/kvm.h
Please see tools/include/uapi/README for details (it's in the first patch
of this series).
Cc: Paolo Bonzini <[email protected]>
Cc: [email protected]
Signed-off-by: Namhyung Kim <[email protected]>
|
|
To pick up changes from:
0f1bb41bf396 drm/i915: Support replaying GPU hangs with captured context image
This should be used to beautify DRM syscall arguments and it addresses
these tools/perf build warnings:
Warning: Kernel ABI header differences:
diff -u tools/include/uapi/drm/i915_drm.h include/uapi/drm/i915_drm.h
Please see tools/include/uapi/README for details (it's in the first patch
of this series).
Cc: Jani Nikula <[email protected]>
Cc: Joonas Lahtinen <[email protected]>
Cc: Rodrigo Vivi <[email protected]>
Cc: [email protected]
Signed-off-by: Namhyung Kim <[email protected]>
|
|
Write down the reason why we keep a copy of headers to the README file
instead of adding it to every commit messages.
Suggested-by: Jani Nikula <[email protected]>
Original-by: Arnaldo Carvalho de Melo <[email protected]>
Original-by: Ingo Molnar <[email protected]>
Signed-off-by: Namhyung Kim <[email protected]>
|
|
There are a couple of statements with two following semicolons,
replace these with just one semicolon.
Signed-off-by: Colin Ian King <[email protected]>
Reviewed-by: Donald Hunter <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
copy_fd_bitmaps(new, old, count) is expected to copy the first
count/BITS_PER_LONG bits from old->full_fds_bits[] and fill
the rest with zeroes. What it does is copying enough words
(BITS_TO_LONGS(count/BITS_PER_LONG)), then memsets the rest.
That works fine, *if* all bits past the cutoff point are
clear. Otherwise we are risking garbage from the last word
we'd copied.
For most of the callers that is true - expand_fdtable() has
count equal to old->max_fds, so there's no open descriptors
past count, let alone fully occupied words in ->open_fds[],
which is what bits in ->full_fds_bits[] correspond to.
The other caller (dup_fd()) passes sane_fdtable_size(old_fdt, max_fds),
which is the smallest multiple of BITS_PER_LONG that covers all
opened descriptors below max_fds. In the common case (copying on
fork()) max_fds is ~0U, so all opened descriptors will be below
it and we are fine, by the same reasons why the call in expand_fdtable()
is safe.
Unfortunately, there is a case where max_fds is less than that
and where we might, indeed, end up with junk in ->full_fds_bits[] -
close_range(from, to, CLOSE_RANGE_UNSHARE) with
* descriptor table being currently shared
* 'to' being above the current capacity of descriptor table
* 'from' being just under some chunk of opened descriptors.
In that case we end up with observably wrong behaviour - e.g. spawn
a child with CLONE_FILES, get all descriptors in range 0..127 open,
then close_range(64, ~0U, CLOSE_RANGE_UNSHARE) and watch dup(0) ending
up with descriptor #128, despite #64 being observably not open.
The minimally invasive fix would be to deal with that in dup_fd().
If this proves to add measurable overhead, we can go that way, but
let's try to fix copy_fd_bitmaps() first.
* new helper: bitmap_copy_and_expand(to, from, bits_to_copy, size).
* make copy_fd_bitmaps() take the bitmap size in words, rather than
bits; it's 'count' argument is always a multiple of BITS_PER_LONG,
so we are not losing any information, and that way we can use the
same helper for all three bitmaps - compiler will see that count
is a multiple of BITS_PER_LONG for the large ones, so it'll generate
plain memcpy()+memset().
Reproducer added to tools/testing/selftests/core/close_range_test.c
Cc: [email protected]
Signed-off-by: Al Viro <[email protected]>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest
Pull kselftest fix from Shuah Khan:
"A single fix to the conditional in ksft.py script which incorrectly
flags a test suite failed when there are skipped tests in the mix.
The logic is fixed to take skipped tests into account and report the
test as passed"
* tag 'linux_kselftest-fixes-6.11-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
selftests: ksft: Fix finished() helper exit code on skipped tests
|
|
Add new test cases to test_cpuset_prs.sh to cover corner cases reported
in previous fix commits.
Signed-off-by: Waiman Long <[email protected]>
Signed-off-by: Tejun Heo <[email protected]>
|
|
In many modern Linux distros, running `lsvmbus` returns the error:
```
/usr/bin/env: 'python': No such file or directory
```
because 'python' doesn't point anywhere.
Now that python2 has reached EOL as of January 1, 2020 and is no longer
maintained[1], these distros have python3 instead.
Also, the script isn't executable by default because the permissions are
set to mode 644.
Fix this by updating the shebang in the `lsvmbus` to use python3 instead
of python. Also fix the permissions to be 755 so that is executable by
default, which matches other similar scripts in `tools/hv`.
The script is also tested and verified that is compatible with
python3.
[1] https://www.python.org/doc/sunset-python-2/
Signed-off-by: Anthony Nandaa <[email protected]>
Reviewed-by: Michael Kelley <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Wei Liu <[email protected]>
Message-ID: <[email protected]>
|
|
Print more stack frames and the failing line when check fails.
This helps when tests use helpers to do the checks.
Before:
# At ./ksft/drivers/net/hw/rss_ctx.py line 92:
# Check failed 1037698 >= 396893.0 traffic on other queues:[344612, 462380, 233020, 449174, 342298]
not ok 8 rss_ctx.test_rss_context_queue_reconfigure
After:
# Check| At ./ksft/drivers/net/hw/rss_ctx.py, line 387, in test_rss_context_queue_reconfigure:
# Check| test_rss_queue_reconfigure(cfg, main_ctx=False)
# Check| At ./ksft/drivers/net/hw/rss_ctx.py, line 230, in test_rss_queue_reconfigure:
# Check| _send_traffic_check(cfg, port, ctx_ref, { 'target': (0, 3),
# Check| At ./ksft/drivers/net/hw/rss_ctx.py, line 92, in _send_traffic_check:
# Check| ksft_lt(sum(cnts[i] for i in params['noise']), directed / 2,
# Check failed 1045235 >= 405823.5 traffic on other queues (context 1)':[460068, 351995, 565970, 351579, 127270]
not ok 8 rss_ctx.test_rss_context_queue_reconfigure
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
Petr suggested to use errno.EOPNOTSUPP instead of hard-coded 95
in the new test case. Adjust existing ones to match this style.
Signed-off-by: Stanislav Fomichev <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
Add new @ksft_disruptive decorator to mark the tests that might
be disruptive to the system. Depending on how well the previous
test works in the CI we might want to disable disruptive tests
by default and only let the developers run them manually.
KSFT framework runs disruptive tests by default. DISRUPTIVE=False
environment (or config file) can be used to disable these tests.
ksft_setup should be called by the test cases that want to use
new decorator (ksft_setup is only called via NetDrvEnv/NetDrvEpEnv for now).
In the future we can add similar decorators to, for example, avoid
running slow tests all the time. And/or have some option to run
only 'fast' tests for some sort of smoke test scenario.
$ DISRUPTIVE=False ./stats.py
KTAP version 1
1..5
ok 1 stats.check_pause
ok 2 stats.check_fec
ok 3 stats.pkt_byte_sum
ok 4 stats.qstat_by_ifindex
ok 5 stats.check_down # SKIP marked as disruptive
# Totals: pass:4 fail:0 xfail:0 xpass:0 skip:1 error:0
v3:
- parse yes and properly treat non-zero nums as true (Petr)
v2:
- convert from cli argument to env variable (Jakub)
Signed-off-by: Stanislav Fomichev <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
Verify that total device stats don't decrease after it has been turned down.
Also make sure the device doesn't crash when we access per-queue stats
when it's down (in case it tries to access some pointers that are NULL).
KTAP version 1
1..5
ok 1 stats.check_pause
ok 2 stats.check_fec
ok 3 stats.pkt_byte_sum
ok 4 stats.qstat_by_ifindex
ok 5 stats.check_down
# Totals: pass:5 fail:0 xfail:0 xpass:0 skip:0 error:0
v3:
- use errno.EOPNOTSUPP (Petr)
- move qstat[0] under try (Petr)
v2:
- KTAP output formatting (Jakub)
- defer instead of try/finally (Jakub)
- disappearing stats is an error (Jakub)
- ksft_ge instead of open coding (Jakub)
Signed-off-by: Stanislav Fomichev <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
Pull kvm updates from Paolo Bonzini:
"The bulk of the changes here is a largish change to guest_memfd,
delaying the clearing and encryption of guest-private pages until they
are actually added to guest page tables. This started as "let's make
it impossible to misuse the API" for SEV-SNP; but then it ballooned a
bit.
The new logic is generally simpler and more ready for hugepage support
in guest_memfd.
Summary:
- fix latent bug in how usage of large pages is determined for
confidential VMs
- fix "underline too short" in docs
- eliminate log spam from limited APIC timer periods
- disallow pre-faulting of memory before SEV-SNP VMs are initialized
- delay clearing and encrypting private memory until it is added to
guest page tables
- this change also enables another small cleanup: the checks in
SNP_LAUNCH_UPDATE that limit it to non-populated, private pages can
now be moved in the common kvm_gmem_populate() function
- fix compilation error that the RISC-V merge introduced in selftests"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
KVM: x86/mmu: fix determination of max NPT mapping level for private pages
KVM: riscv: selftests: Fix compile error
KVM: guest_memfd: abstract how prepared folios are recorded
KVM: guest_memfd: let kvm_gmem_populate() operate only on private gfns
KVM: extend kvm_range_has_memory_attributes() to check subset of attributes
KVM: cleanup and add shortcuts to kvm_range_has_memory_attributes()
KVM: guest_memfd: move check for already-populated page to common code
KVM: remove kvm_arch_gmem_prepare_needed()
KVM: guest_memfd: make kvm_gmem_prepare_folio() operate on a single struct kvm
KVM: guest_memfd: delay kvm_gmem_prepare_folio() until the memory is passed to the guest
KVM: guest_memfd: return locked folio from __kvm_gmem_get_pfn
KVM: rename CONFIG_HAVE_KVM_GMEM_* to CONFIG_HAVE_KVM_ARCH_GMEM_*
KVM: guest_memfd: do not go through struct page
KVM: guest_memfd: delay folio_mark_uptodate() until after successful preparation
KVM: guest_memfd: return folio from __kvm_gmem_get_pfn()
KVM: x86: disallow pre-fault for SNP VMs before initialization
KVM: Documentation: Fix title underline too short warning
KVM: x86: Eliminate log spam from limited APIC timer periods
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux
Pull RISC-V fixes from Palmer Dabbelt:
- A fix to avoid dropping some of the internal pseudo-extensions, which
breaks *envcfg dependency parsing
- The kernel entry address is now aligned in purgatory, which avoids a
misaligned load that can lead to crash on systems that don't support
misaligned accesses early in boot
- The FW_SFENCE_VMA_RECEIVED perf event was duplicated in a handful of
perf JSON configurations, one of them been updated to
FW_SFENCE_VMA_ASID_SENT
- The starfive cache driver is now restricted to 64-bit systems, as it
isn't 32-bit clean
- A fix for to avoid aliasing legacy-mode perf counters with software
perf counters
- VM_FAULT_SIGSEGV is now handled in the page fault code
- A fix for stalls during CPU hotplug due to IPIs being disabled
- A fix for memblock bounds checking. This manifests as a crash on
systems with discontinuous memory maps that have regions that don't
fit in the linear map
* tag 'riscv-for-linus-6.11-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux:
riscv: Fix linear mapping checks for non-contiguous memory regions
RISC-V: Enable the IPI before workqueue_online_cpu()
riscv/mm: Add handling for VM_FAULT_SIGSEGV in mm_fault_error()
perf: riscv: Fix selecting counters in legacy mode
cache: StarFive: Require a 64-bit system
perf arch events: Fix duplicate RISC-V SBI firmware event name
riscv/purgatory: align riscv_kernel_entry
riscv: cpufeature: Do not drop Linux-internal extensions
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic
Pull asm-generic fixes from Arnd Bergmann:
"These are three important bug fixes for the cross-architecture tree,
fixing a regression with the new syscall.tbl file, the inconsistent
numbering for the new uretprobe syscall and a bug with iowrite64be on
alpha"
* tag 'asm-generic-fixes-6.11-1' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic:
syscalls: fix syscall macros for newfstat/newfstatat
uretprobe: change syscall number, again
alpha: fix ioread64be()/iowrite64be() helpers
|
|
Pull drm fixes from Dave Airlie:
"Regular weekly fixes. This is a bit larger than usual but doesn't seem
too crazy.
Most of it is vmwgfx changes that fix a bunch of issues with wayland
userspaces with dma-buf/external buffers and modesetting fixes.
Otherwise it's kinda spread out, v3d fixes some new ioctls, nouveau
has regression revert and fixes, amdgpu, i915 and ast have some small
fixes, and some core fixes spread about.
client:
- fix error code
atomic:
- allow damage clips with async flips
- allow explicit sync with async flips
kselftests:
- fix dmabuf-heaps test
panic:
- fix schedule_work in panic paths
panel:
- fix OrangePi Neo orientation
gpuvm:
- fix missing dependency
amdgpu:
- SMU 14.x update
- Fix contiguous VRAM handling for IB parsing
- GFX 12 fix
- Regression fix for old APUs
i915:
- Static analysis fix for int overflow
- Fix for HDCP2_STREAM_STATUS macro and removal of PWR_CLK_STATE for gen12
nouveau:
- revert busy wait change that caused a resume regression
- fix buffer placement fault on dynamic pm s/r
- fix refcount underflow
ast:
- fix black screen on resume
- wake during connector status detect
v3d:
- fix issues with perf/timestamp ioctls
vmwgfx:
- fix deadlock in dma-buf fence polling
- fix screen surface refcounting
- fix dumb buffer handling
- fix support for external buffers
- fix overlay with screen targets
- trigger modeset on screen moves"
* tag 'drm-fixes-2024-08-02' of https://gitlab.freedesktop.org/drm/kernel: (31 commits)
Revert "nouveau: rip out busy fence waits"
nouveau: set placement to original placement on uvmm validate.
drm/atomic: Allow userspace to use damage clips with async flips
drm/atomic: Allow userspace to use explicit sync with atomic async flips
drm/i915: Fix possible int overflow in skl_ddi_calculate_wrpll()
drm/i915/hdcp: Fix HDCP2_STREAM_STATUS macro
drm/ast: astdp: Wake up during connector status detection
i915/perf: Remove code to update PWR_CLK_STATE for gen12
kselftests: dmabuf-heaps: Ensure the driver name is null-terminated
drm/client: Fix error code in drm_client_buffer_vmap_local()
drm/amdgpu: Fix APU handling in amdgpu_pm_load_smu_firmware()
drm/amdgpu: increase mes log buffer size for gfx12
drm/amdgpu: fix contiguous handling for IB parsing v2
drm/amdgpu/pm: support gpu_metrics sysfs interface for smu v14.0.2/3
drm/vmwgfx: Trigger a modeset when the screen moves
drm/vmwgfx: Fix overlay when using Screen Targets
drm/vmwgfx: Add basic support for external buffers
drm/vmwgfx: Fix handling of dumb buffers
drm/vmwgfx: Make sure the screen surface is ref counted
drm/vmwgfx: Fix a deadlock in dma buf fence polling
...
|
|
Despite multiple attempts to get the syscall number assignment right
for the newly added uretprobe syscall, we ended up with a bit of a mess:
- The number is defined as 467 based on the assumption that the
xattrat family of syscalls would use 463 through 466, but those
did not make it into 6.11.
- The include/uapi/asm-generic/unistd.h file still lists the number
463, but the new scripts/syscall.tbl that was supposed to have the
same data lists 467 instead as the number for arc, arm64, csky,
hexagon, loongarch, nios2, openrisc and riscv. None of these
architectures actually provide a uretprobe syscall.
- All the other architectures (powerpc, arm, mips, ...) don't list
this syscall at all.
There are two ways to make it consistent again: either list it with
the same syscall number on all architectures, or only list it on x86
but not in scripts/syscall.tbl and asm-generic/unistd.h.
Based on the most recent discussion, it seems like we won't need it
anywhere else, so just remove the inconsistent assignment and instead
move the x86 number to the next available one in the architecture
specific range, which is 335.
Fixes: 5c28424e9a34 ("syscalls: Fix to add sys_uretprobe to syscall.tbl")
Fixes: 190fec72df4a ("uprobe: Wire up uretprobe system call")
Fixes: 63ded110979b ("uprobe: Change uretprobe syscall scope and number")
Acked-by: Masami Hiramatsu (Google) <[email protected]>
Reviewed-by: Jiri Olsa <[email protected]>
Signed-off-by: Arnd Bergmann <[email protected]>
|
|
Add a few new tests to exercise the signal handler flow, especially with
PKEY 0 disabled:
- Verify that the SIGSEGV handler is invoked when pkey 0 is disabled.
- Verify that a thread which disables PKEY 0 segfaults with PKUERR when
accessing the stack.
- Verify that the SIGSEGV handler that uses an alternate signal stack is
correctly invoked when the thread disabled PKEY 0
- Verify that the PKRU value set by the application is correctly restored
upon return from signal handling.
- Verify that sigreturn() is able to restore the altstack even if the
thread had PKEY 0 disabled
[ Aruna: Adapted to upstream ]
[ tglx: Made it actually compile. Restored protection_keys compile. Added
useful info to the changelog instead of bare function names. ]
Signed-off-by: Keith Lucas <[email protected]>
Signed-off-by: Aruna Ramakrishna <[email protected]>
Signed-off-by: Thomas Gleixner <[email protected]>
Link: https://lore.kernel.org/all/[email protected]
|
|
This way uprobe_unregister() and uprobe_apply() can use "struct uprobe *"
rather than inode + offset. This simplifies the code and allows to avoid
the unnecessary find_uprobe() + put_uprobe() in these functions.
TODO: uprobe_unregister() still needs get_uprobe/put_uprobe to ensure that
this uprobe can't be freed before up_write(&uprobe->register_rwsem).
Co-developed-by: Andrii Nakryiko <[email protected]>
Signed-off-by: Andrii Nakryiko <[email protected]>
Signed-off-by: Oleg Nesterov <[email protected]>
Signed-off-by: Peter Zijlstra (Intel) <[email protected]>
Reviewed-by: Jiri Olsa <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
|
|
It doesn't make any sense to have 2 versions of _register(). Note that
trace_uprobe_enable(), the only user of uprobe_register(), doesn't need
to check tu->ref_ctr_offset to decide which one should be used, it could
safely pass ref_ctr_offset == 0 to uprobe_register_refctr().
Add this argument to uprobe_register(), update the callers, and kill
uprobe_register_refctr().
Signed-off-by: Oleg Nesterov <[email protected]>
Signed-off-by: Peter Zijlstra (Intel) <[email protected]>
Reviewed-by: Jiri Olsa <[email protected]>
Acked-by: Andrii Nakryiko <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
|
|
testmod_unregister_uprobe() forgets to path_put(&uprobe.path).
Signed-off-by: Jiri Olsa <[email protected]>
Signed-off-by: Oleg Nesterov <[email protected]>
Signed-off-by: Peter Zijlstra (Intel) <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
|
|
Introduce two tests, one for SOCK_STREAM and one for SOCK_SEQPACKET,
which use SIOCOUTQ ioctl to check that the number of unsent bytes is
zero after delivering a packet.
vsock_connect and vsock_accept are no longer static: this is to
create more generic tests, allowing code to be reused for SEQPACKET
and STREAM.
Signed-off-by: Luigi Leonardi <[email protected]>
Reviewed-by: Stefano Garzarella <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
For parsing the cpuid bitfields, kcpuid uses an incomplete CSV file with
300+ bitfields.
Use an auto-generated CSV file from the x86-cpuid.org project instead.
It provides complete bitfields coverage: 830+ bitfields, all with proper
descriptions.
The auto-generated file has the following blurb automatically added:
# SPDX-License-Identifier: CC0-1.0
# Generator: x86-cpuid-db v1.0
The generator tag includes the project's workspace "git describe"
version string. It is intended for projects like KernelCI, to aid in
verifying that the auto-generated files have not been tampered with.
The file also has the blurb:
# Auto-generated file.
# Please submit all updates and bugfixes to https://x86-cpuid.org
It's thus kindly requested that the Linux kernel's x86 tree maintainers
enforce sending all updates to x86-cpuid.org's upstream database first,
thus benefiting the whole ecosystem.
Signed-off-by: Ahmed S. Darwish <[email protected]>
Signed-off-by: Thomas Gleixner <[email protected]>
Link: https://gitlab.com/x86-cpuid.org/x86-cpuid-db/-/blob/v1.0/LICENSE.rst
Link: https://gitlab.com/x86-cpuid.org/x86-cpuid-db
Link: https://lore.kernel.org/all/[email protected]
|
|
It's a common pattern in cpuid leaves to have the same bitfields format
repeated across a number of subleaves. Typically, this is used for
enumerating hierarchial structures like cache and TLB levels, CPU
topology levels, etc.
Modify kcpuid.c to handle subleaf ranges in the CSV file subleaves
column. For example, make it able to parse lines in the form:
# LEAF, SUBLEAVES, reg, bits, short_name , ...
0xb, 1:0, eax, 4:0, x2apic_id_shift , ...
0xb, 1:0, ebx, 15:0, domain_lcpus_count , ...
0xb, 1:0, ecx, 7:0, domain_nr , ...
This way, full output can be printed to the user.
Signed-off-by: Ahmed S. Darwish <[email protected]>
Signed-off-by: Thomas Gleixner <[email protected]>
Link: https://lore.kernel.org/all/[email protected]
|
|
cpuid.csv will be extended in further commits with all-publicly-known
CPUID leaves and bitfields. Thus, modify has_subleafs() to identify all
known leaves with subleaves.
Remove the redundant "is_amd" check since all x86 vendors already report
the maxium supported extended leaf at leaf 0x80000000 EAX register.
The extra mentioned leaves are:
- Leaf 0x12, Intel Software Guard Extensions (SGX) enumeration
- Leaf 0x14, Intel process trace (PT) enumeration
- Leaf 0x17, Intel SoC vendor attributes enumeration
- Leaf 0x1b, Intel PCONFIG (Platform configuration) enumeration
- Leaf 0x1d, Intel AMX (Advanced Matrix Extensions) tile information
- Leaf 0x1f, Intel v2 extended topology enumeration
- Leaf 0x23, Intel ArchPerfmonExt (Architectural PMU ext) enumeration
- Leaf 0x80000020, AMD Platform QoS extended features enumeration
- Leaf 0x80000026, AMD v2 extended topology enumeration
Set the 'max_subleaf' variable for all the newly marked leaves with extra
subleaves. Ideally, this should be fetched from the CSV file instead,
but the current kcpuid code architecture has two runs: one run to
serially invoke the cpuid instructions and save all the output in-memory,
and one run to parse this in-memory output through the CSV specification.
Signed-off-by: Ahmed S. Darwish <[email protected]>
Signed-off-by: Thomas Gleixner <[email protected]>
Link: https://lore.kernel.org/all/[email protected]
|
|
While parsing and saving bitfield names from the CSV file, an extra
leading space is copied verbatim. That extra space is not a big issue
now, but further commits will add a new CSV file with much more padding
for the bitfield's name column.
Strip leading/trailing whitespaces while saving bitfield names.
Signed-off-by: Ahmed S. Darwish <[email protected]>
Signed-off-by: Thomas Gleixner <[email protected]>
Link: https://lore.kernel.org/all/[email protected]
|
|
Protect against the kcpuid code parsing faulty max subleaf numbers
through a min() expression. Thus, ensuring that max_subleaf will always
be ≤ MAX_SUBLEAF_NUM.
Use "u32" for the subleaf numbers since kcpuid is compiled with -Wextra,
which includes signed/unsigned comparisons warnings.
Signed-off-by: Ahmed S. Darwish <[email protected]>
Signed-off-by: Thomas Gleixner <[email protected]>
Link: https://lore.kernel.org/all/[email protected]
|
|
cpuid.csv will be extended in further commits with all-publicly-known
CPUID leaves and bitfields. One of the new leaves is 0xd for extended
CPU state enumeration. Depending on XCR0 dword bits, it can export up to
64 subleaves.
Set kcpuid.c MAX_SUBLEAF_NUM to 64.
Signed-off-by: Ahmed S. Darwish <[email protected]>
Signed-off-by: Thomas Gleixner <[email protected]>
Link: https://lore.kernel.org/all/[email protected]
|
|
When kcpuid is invoked with "--all --details", the detailed description
column is not properly aligned for all bitfield rows:
CPUID_0x4_ECX[0x0]:
cache_level : 0x1 - Cache Level ...
cache_self_init - Cache Self Initialization
This is due to differences in output handling between boolean single-bit
"bitflags" and multi-bit bitfields. For the former, the bitfield's value
is not outputted as it is implied to be true by just outputting the
bitflag's name in its respective line.
If long descriptions were requested through the --all parameter, properly
align the bitflag's description columns through extra tabs. With that,
the sample output above becomes:
CPUID_0x4_ECX[0x0]:
cache_level : 0x1 - Cache Level ...
cache_self_init - Cache Self Initialization
Signed-off-by: Ahmed S. Darwish <[email protected]>
Signed-off-by: Thomas Gleixner <[email protected]>
Link: https://lore.kernel.org/all/[email protected]
|
|
Global variable "num_leafs" is set in multiple places but is never read
anywhere. Remove it.
Signed-off-by: Ahmed S. Darwish <[email protected]>
Signed-off-by: Thomas Gleixner <[email protected]>
Link: https://lore.kernel.org/all/[email protected]
|