aboutsummaryrefslogtreecommitdiff
path: root/tools
AgeCommit message (Collapse)AuthorFilesLines
2023-02-02selftests: net: udpgso_bench_rx: Fix 'used uninitialized' compiler warningAndrei Gherzan1-1/+1
This change fixes the following compiler warning: /usr/include/x86_64-linux-gnu/bits/error.h:40:5: warning: ‘gso_size’ may be used uninitialized [-Wmaybe-uninitialized] 40 | __error_noreturn (__status, __errnum, __format, __va_arg_pack ()); | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ udpgso_bench_rx.c: In function ‘main’: udpgso_bench_rx.c:253:23: note: ‘gso_size’ was declared here 253 | int ret, len, gso_size, budget = 256; Fixes: 3327a9c46352 ("selftests: add functionals test for UDP GRO") Signed-off-by: Andrei Gherzan <[email protected]> Reviewed-by: Willem de Bruijn <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Paolo Abeni <[email protected]>
2023-02-02selftests/bpf: Remove duplicate include header in xdp_hw_metadataYe Xingchen1-1/+0
The linux/net_tstamp.h is included more than once, thus clean it up. Signed-off-by: Ye Xingchen <[email protected]> Signed-off-by: Daniel Borkmann <[email protected]> Link: https://lore.kernel.org/bpf/[email protected]
2023-02-02selftests/bpf: Don't refill on completion in xdp_metadataStanislav Fomichev1-3/+2
We only need to consume TX completion instead of refilling 'fill' ring. It's currently not an issue because we never RX more than 8 packets. Fixes: e2a46d54d7a1 ("selftests/bpf: Verify xdp_metadata xdp->af_xdp path") Signed-off-by: Stanislav Fomichev <[email protected]> Signed-off-by: Daniel Borkmann <[email protected]> Link: https://lore.kernel.org/bpf/[email protected]
2023-02-02selftests/bpf: xdp_hw_metadata use strncpy for ifnameJesper Dangaard Brouer1-2/+2
The ifname char pointer is taken directly from the command line as input and the string is copied directly into struct ifreq via strcpy. This makes it easy to corrupt other members of ifreq and generally do stack overflows. Most often the ioctl will fail with: ./xdp_hw_metadata: ioctl(SIOCETHTOOL): Bad address As people will likely copy-paste code for getting NIC queue channels (rxq_num) and enabling HW timestamping (hwtstamp_ioctl) lets make this code a bit more secure by using strncpy. Fixes: 297a3f124155 ("selftests/bpf: Simple program to dump XDP RX metadata") Signed-off-by: Jesper Dangaard Brouer <[email protected]> Signed-off-by: Daniel Borkmann <[email protected]> Acked-by: Stanislav Fomichev <[email protected]> Link: https://lore.kernel.org/bpf/167527272543.937063.16993147790832546209.stgit@firesoul
2023-02-02selftests/bpf: xdp_hw_metadata correct status value in error(3)Jesper Dangaard Brouer1-14/+14
The glibc error reporting function error(): void error(int status, int errnum, const char *format, ...); The status argument should be a positive value between 0-255 as it is passed over to the exit(3) function as the value as the shell exit status. The least significant byte of status (i.e., status & 0xFF) is returned to the shell parent. Fix this by using 1 instead of -1. As 1 corresponds to C standard constant EXIT_FAILURE. Fixes: 297a3f124155 ("selftests/bpf: Simple program to dump XDP RX metadata") Signed-off-by: Jesper Dangaard Brouer <[email protected]> Signed-off-by: Daniel Borkmann <[email protected]> Acked-by: Stanislav Fomichev <[email protected]> Link: https://lore.kernel.org/bpf/167527272038.937063.9137108142012298120.stgit@firesoul
2023-02-02selftests/bpf: xdp_hw_metadata cleanup cause segfaultJesper Dangaard Brouer1-1/+1
Using xdp_hw_metadata I experince Segmentation fault after seeing "detaching bpf program....". On my system the segfault happened when accessing bpf_obj->skeleton in xdp_hw_metadata__destroy(bpf_obj) call. That doesn't make any sense as this memory have not been freed by program at this point in time. Prior to calling xdp_hw_metadata__destroy(bpf_obj) the function close_xsk() is called for each RX-queue xsk. The real bug lays in close_xsk() that unmap via munmap() the wrong memory pointer. The call xsk_umem__delete(xsk->umem) will free xsk->umem, thus the call to munmap(xsk->umem, UMEM_SIZE) will have unpredictable behavior. And man page explain subsequent references to these pages will generate SIGSEGV. Unmapping xsk->umem_area instead removes the segfault. Fixes: 297a3f124155 ("selftests/bpf: Simple program to dump XDP RX metadata") Signed-off-by: Jesper Dangaard Brouer <[email protected]> Signed-off-by: Daniel Borkmann <[email protected]> Acked-by: Stanislav Fomichev <[email protected]> Link: https://lore.kernel.org/bpf/167527271533.937063.5717065138099679142.stgit@firesoul
2023-02-02selftests/bpf: xdp_hw_metadata clear metadata when -EOPNOTSUPPJesper Dangaard Brouer1-1/+5
The AF_XDP userspace part of xdp_hw_metadata see non-zero as a signal of the availability of rx_timestamp and rx_hash in data_meta area. The kernel-side BPF-prog code doesn't initialize these members when kernel returns an error e.g. -EOPNOTSUPP. This memory area is not guaranteed to be zeroed, and can contain garbage/previous values, which will be read and interpreted by AF_XDP userspace side. Tested this on different drivers. The experiences are that for most packets they will have zeroed this data_meta area, but occasionally it will contain garbage data. Example of failure tested on ixgbe: poll: 1 (0) xsk_ring_cons__peek: 1 0x18ec788: rx_desc[0]->addr=100000000008000 addr=8100 comp_addr=8000 rx_hash: 3697961069 rx_timestamp: 9024981991734834796 (sec:9024981991.7348) 0x18ec788: complete idx=8 addr=8000 Converting to date: date -d @9024981991 2255-12-28T20:26:31 CET I choose a simple fix in this patch. When kfunc fails or isn't supported assign zero to the corresponding struct meta value. It's up to the individual BPF-programmer to do something smarter e.g. that fits their use-case, like getting a software timestamp and marking a flag that gives the type of timestamp. Fixes: 297a3f124155 ("selftests/bpf: Simple program to dump XDP RX metadata") Signed-off-by: Jesper Dangaard Brouer <[email protected]> Signed-off-by: Daniel Borkmann <[email protected]> Acked-by: Stanislav Fomichev <[email protected]> Link: https://lore.kernel.org/bpf/167527271027.937063.5177725618616476592.stgit@firesoul
2023-02-02selftests/bpf: Fix unmap bug in prog_tests/xdp_metadata.cJesper Dangaard Brouer1-1/+1
The function close_xsk() unmap via munmap() the wrong memory pointer. The call xsk_umem__delete(xsk->umem) have already freed xsk->umem. Thus the call to munmap(xsk->umem, UMEM_SIZE) will have unpredictable behavior that can lead to Segmentation fault elsewhere, as man page explain subsequent references to these pages will generate SIGSEGV. Fixes: e2a46d54d7a1 ("selftests/bpf: Verify xdp_metadata xdp->af_xdp path") Reported-by: Martin KaFai Lau <[email protected]> Signed-off-by: Jesper Dangaard Brouer <[email protected]> Signed-off-by: Daniel Borkmann <[email protected]> Acked-by: Stanislav Fomichev <[email protected]> Link: https://lore.kernel.org/bpf/167527517464.938135.13750760520577765269.stgit@firesoul
2023-02-02selftests/bpf: Add testcase for static kfunc with unused argDavid Vernet2-0/+12
kfuncs are allowed to be static, or not use one or more of their arguments. For example, bpf_xdp_metadata_rx_hash() in net/core/xdp.c is meant to be implemented by drivers, with the default implementation just returning -EOPNOTSUPP. As described in [0], such kfuncs can have their arguments elided, which can cause BTF encoding to be skipped. The new __bpf_kfunc macro should address this, and this patch adds a selftest which verifies that a static kfunc with at least one unused argument can still be encoded and invoked by a BPF program. Signed-off-by: David Vernet <[email protected]> Signed-off-by: Daniel Borkmann <[email protected]> Link: https://lore.kernel.org/bpf/[email protected]
2023-02-02bpf: Add __bpf_kfunc tag to all kfuncsDavid Vernet1-1/+1
Now that we have the __bpf_kfunc tag, we should use add it to all existing kfuncs to ensure that they'll never be elided in LTO builds. Signed-off-by: David Vernet <[email protected]> Signed-off-by: Daniel Borkmann <[email protected]> Acked-by: Stanislav Fomichev <[email protected]> Link: https://lore.kernel.org/bpf/[email protected]
2023-02-01Merge tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhostLinus Torvalds8-5/+45
Pull virtio fixes from Michael Tsirkin: "Just small bugfixes all over the place" * tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost: vdpa: ifcvf: Do proper cleanup if IFCVF init fails vhost-scsi: unbreak any layout for response tools/virtio: fix the vringh test for virtio ring changes vhost/net: Clear the pending messages when the backend is removed
2023-02-01kselftest/arm64: Fix enumeration of systems without 128 bit SME for SSVE+ZAMark Brown1-0/+4
The current signal handling tests for SME do not account for the fact that unlike SVE all SME vector lengths are optional so we can't guarantee that we will encounter the minimum possible VL, they will hang enumerating VLs on such systems. Abort enumeration when we find the lowest VL in the newly added ssve_za_regs test. Fixes: bc69da5ff087 ("kselftest/arm64: Verify simultaneous SSVE and ZA context generation") Signed-off-by: Mark Brown <[email protected]> Link: https://lore.kernel.org/r/20230131-arm64-kselftest-sig-sme-no-128-v1-2-d47c13dc8e1e@kernel.org Signed-off-by: Catalin Marinas <[email protected]>
2023-02-01kselftest/arm64: Fix enumeration of systems without 128 bit SMEMark Brown2-0/+8
The current signal handling tests for SME do not account for the fact that unlike SVE all SME vector lengths are optional so we can't guarantee that we will encounter the minimum possible VL, they will hang enumerating VLs on such systems. Abort enumeration when we find the lowest VL. Fixes: 4963aeb35a9e ("kselftest/arm64: signal: Add SME signal handling tests") Signed-off-by: Mark Brown <[email protected]> Link: https://lore.kernel.org/r/20230131-arm64-kselftest-sig-sme-no-128-v1-1-d47c13dc8e1e@kernel.org Signed-off-by: Catalin Marinas <[email protected]>
2023-02-01kselftest/arm64: Don't require FA64 for streaming SVE testsMark Brown1-6/+1
During early development a dependedncy was added on having FA64 available so we could use the full FPSIMD register set in the signal handler. Subsequently the ABI was finialised so the handler is run with streaming mode disabled meaning this is redundant but the dependency was never removed, do so now. Signed-off-by: Mark Brown <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Catalin Marinas <[email protected]>
2023-01-31selftests: net: forwarding: lib: Drop lldpad_app_wait_set(), _del()Petr Machata1-21/+0
The existing users of these helpers have been converted to iproute2 dcb. Drop the helpers. Signed-off-by: Petr Machata <[email protected]> Reviewed-by: Danielle Ratson <[email protected]> Signed-off-by: Jakub Kicinski <[email protected]>
2023-01-31selftests: mlxsw: qos_defprio: Convert from lldptool to dcbPetr Machata1-52/+16
Set up default port priority through the iproute2 dcb tool, which is easier to understand and manage. Signed-off-by: Petr Machata <[email protected]> Reviewed-by: Danielle Ratson <[email protected]> Signed-off-by: Jakub Kicinski <[email protected]>
2023-01-31selftests: mlxsw: qos_dscp_router: Convert from lldptool to dcbPetr Machata1-21/+6
Set up DSCP prioritization through the iproute2 dcb tool, which is easier to understand and manage. Signed-off-by: Petr Machata <[email protected]> Reviewed-by: Danielle Ratson <[email protected]> Signed-off-by: Jakub Kicinski <[email protected]>
2023-01-31selftests: mlxsw: qos_dscp_bridge: Convert from lldptool to dcbPetr Machata1-18/+5
Set up DSCP prioritization through the iproute2 dcb tool, which is easier to understand and manage. Signed-off-by: Petr Machata <[email protected]> Reviewed-by: Danielle Ratson <[email protected]> Signed-off-by: Jakub Kicinski <[email protected]>
2023-01-31tools: net: use python3 explicitlyJakub Kicinski2-2/+2
The scripts require Python 3 and some distros are dropping Python 2 support. Reported-by: Stanislav Fomichev <[email protected]> Signed-off-by: Jakub Kicinski <[email protected]>
2023-01-31tools: ynl: load jsonschema on demandJakub Kicinski2-1/+14
The CLI script tries to validate jsonschema by default. It's seems better to validate too many times than too few. However, when copying the scripts to random servers having to install jsonschema is tedious. Load jsonschema via importlib, and let the user opt out. Signed-off-by: Jakub Kicinski <[email protected]>
2023-01-31tools: ynl: use operation names from spec on the CLIJakub Kicinski2-4/+11
When I wrote the first version of the Python code I was quite excited that we can generate class methods directly from the spec. Unfortunately we need to use valid identifiers for method names (specifically no dashes are allowed). Don't reuse those names on the CLI, it's much more natural to use the operation names exactly as listed in the spec. Instead of: ./cli --do rings_get use: ./cli --do rings-get Signed-off-by: Jakub Kicinski <[email protected]>
2023-01-31tools: ynl: support pretty printing bad attribute namesJakub Kicinski1-0/+40
One of my favorite features of the Netlink specs is that they make decoding structured extack a ton easier. Implement pretty printing bad attribute names in YNL. For example it will now say: 'bad-attr': '.header.flags' rather than the useless: 'bad-attr-offs': 32 Proof: $ ./cli.py --spec ethtool.yaml --do rings_get \ --json '{"header":{"dev-index":1, "flags":4}}' Netlink error: Invalid argument nl_len = 68 (52) nl_flags = 0x300 nl_type = 2 error: -22 extack: {'msg': 'reserved bit set', 'bad-attr': '.header.flags'} Signed-off-by: Jakub Kicinski <[email protected]>
2023-01-31tools: ynl: support multi-attrJakub Kicinski1-7/+14
Ethtool uses mutli-attr, add the support to YNL. Signed-off-by: Jakub Kicinski <[email protected]>
2023-01-31tools: ynl: support directional enum-model in CLIJakub Kicinski1-4/+4
Support families which use different IDs for messages to and from the kernel. Signed-off-by: Jakub Kicinski <[email protected]>
2023-01-31tools: ynl: add support for types needed by ethtoolJakub Kicinski1-1/+10
Ethtool needs support for handful of extra types. It doesn't have the definitions section yet. Signed-off-by: Jakub Kicinski <[email protected]>
2023-01-31tools: ynl: use the common YAML loading and validation codeJakub Kicinski2-232/+142
Adapt the common object hierarchy in code gen and CLI. Signed-off-by: Jakub Kicinski <[email protected]>
2023-01-31tools: ynl: add an object hierarchy to represent parsed specJakub Kicinski2-1/+304
There's a lot of copy and pasting going on between the "cli" and code gen when it comes to representing the parsed spec. Create a library which both can use. Signed-off-by: Jakub Kicinski <[email protected]>
2023-01-31tools: ynl: move the cli and netlink code aroundJakub Kicinski3-1/+6
Move the CLI code out of samples/ and the library part of it into tools/net/ynl/lib/. This way we can start sharing some code with the code gen. Initially I thought that code gen is too C-specific to share anything but basic stuff like calculating values for enums can easily be shared. Signed-off-by: Jakub Kicinski <[email protected]>
2023-01-31tools: ynl-gen: prevent do / dump reorderingJakub Kicinski1-2/+2
An earlier fix tried to address generated code jumping around one code-gen run to another. Turns out dict()s are already ordered since Python 3.7, the problem is that we iterate over operation modes using a set(). Sets are unordered in Python. Signed-off-by: Jakub Kicinski <[email protected]>
2023-01-31cgroup/cpuset: Fix wrong check in update_parent_subparts_cpumask()Waiman Long1-0/+1
It was found that the check to see if a partition could use up all the cpus from the parent cpuset in update_parent_subparts_cpumask() was incorrect. As a result, it is possible to leave parent with no effective cpu left even if there are tasks in the parent cpuset. This can lead to system panic as reported in [1]. Fix this probem by updating the check to fail the enabling the partition if parent's effective_cpus is a subset of the child's cpus_allowed. Also record the error code when an error happens in update_prstate() and add a test case where parent partition and child have the same cpu list and parent has task. Enabling partition in the child will fail in this case. [1] https://www.spinics.net/lists/cgroups/msg36254.html Fixes: f0af1bfc27b5 ("cgroup/cpuset: Relax constraints to partition & cpus changes") Cc: [email protected] # v6.1 Reported-by: Srinivas Pandruvada <[email protected]> Signed-off-by: Waiman Long <[email protected]> Signed-off-by: Tejun Heo <[email protected]>
2023-01-31kselftest/arm64: Remove redundant _start labels from zt-testMark Brown1-1/+0
The newly added zt-test program copied the pattern from the other FP stress test programs of having a redundant _start label which is rejected by clang, as we did in a parallel series for the other tests remove the label so we can build with clang. No functional change. Signed-off-by: Mark Brown <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Catalin Marinas <[email protected]>
2023-01-31kselftest/arm64: Limit the maximum VL we try to set via ptraceMark Brown2-4/+24
When SVE was initially merged we chose to export the maximum VQ in the ABI as being 512, rather more than the architecturally supported maximum of 16. For the ptrace tests this results in us generating a lot of test cases and hence log output which are redundant since a system couldn't possibly support them. Instead only check values up to the current architectural limit, plus one more so that we're covering the constraining of higher vector lengths. This makes no practical difference to our test coverage, speeds things up on slower consoles and makes the output much more managable. Signed-off-by: Mark Brown <[email protected]> Link: https://lore.kernel.org/r/20230111-arm64-kselftest-ptrace-max-vl-v1-1-8167f41d1ad8@kernel.org Signed-off-by: Catalin Marinas <[email protected]>
2023-01-31Merge tag 'v6.2-rc6' into sched/core, to pick up fixesIngo Molnar87-392/+1005
Pick up fixes before merging another batch of cpuidle updates. Signed-off-by: Ingo Molnar <[email protected]>
2023-01-30selftests/seccomp: Add m68k supportMichael Schmitz1-1/+7
Add m68k seccomp definitions to seccomp_bpf self test code. Tested on ARAnyM. Signed-off-by: Michael Schmitz <[email protected]> Reviewed-by: Geert Uytterhoeven <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Geert Uytterhoeven <[email protected]>
2023-01-30KVM: selftests: Fix build of rseq testMark Brown1-13/+3
The KVM rseq test is failing to build in -next due to a commit merged from the tip tree which adds a wrapper for sys_getcpu() to the rseq kselftests, conflicting with the wrapper already included in the KVM selftest: rseq_test.c:48:13: error: conflicting types for 'sys_getcpu' 48 | static void sys_getcpu(unsigned *cpu) | ^~~~~~~~~~ In file included from rseq_test.c:23: ../rseq/rseq.c:82:12: note: previous definition of 'sys_getcpu' was here 82 | static int sys_getcpu(unsigned *cpu, unsigned *node) | ^~~~~~~~~~ Fix this by removing the local wrapper and moving the result check up to the caller. Fixes: 99babd04b250 ("selftests/rseq: Implement rseq numa node id field selftest") Signed-off-by: Mark Brown <[email protected]> Signed-off-by: Peter Zijlstra (Intel) <[email protected]> Acked-by: Mathieu Desnoyers <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2023-01-29selftests/bpf: Trim DENYLIST.s390xIlya Leoshkevich1-69/+0
Now that trampoline is implemented, enable a number of tests on s390x. 18 of the remaining failures have to do with either lack of rethook (fixed by [1]) or syscall symbols missing from BTF (fixed by [2]). Do not re-classify the remaining failures for now; wait until the s390/for-next fixes are merged and re-classify only the remaining few. [1] https://git.kernel.org/pub/scm/linux/kernel/git/s390/linux.git/commit/?h=for-next&id=1a280f48c0e403903cf0b4231c95b948e664f25a [2] https://git.kernel.org/pub/scm/linux/kernel/git/s390/linux.git/commit/?h=for-next&id=2213d44e140f979f4b60c3c0f8dd56d151cc8692 Signed-off-by: Ilya Leoshkevich <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Alexei Starovoitov <[email protected]>
2023-01-29selftests/bpf: Fix s390x vmlinux pathIlya Leoshkevich1-1/+1
After commit edd4a8667355 ("s390/boot: get rid of startup archive") there is no more compressed/ subdirectory. Signed-off-by: Ilya Leoshkevich <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Alexei Starovoitov <[email protected]>
2023-01-29selftests/bpf: Fix sk_assign on s390xIlya Leoshkevich3-6/+33
sk_assign is failing on an s390x machine running Debian "bookworm" for 2 reasons: legacy server_map definition and uninitialized addrlen in recvfrom() call. Fix by adding a new-style server_map definition and dropping addrlen (recvfrom() allows NULL values for src_addr and addrlen). Since the test should support tc built without libbpf, build the prog twice: with the old-style definition and with the new-style definition, then select the right one at runtime. This could be done at compile time too, but this would not be cross-compilation friendly. Signed-off-by: Ilya Leoshkevich <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Alexei Starovoitov <[email protected]>
2023-01-29KVM: selftests: aarch64: Test read-only PT memory regionsRicardo Koller1-7/+11
Extend the read-only memslot tests in page_fault_test to test read-only PT (Page table) memslots. Note that this was not allowed before commit 406504c7b040 ("KVM: arm64: Fix S1PTW handling on RO memslots") as all S1PTW faults were treated as writes which resulted in an (unrecoverable) exception inside the guest. Signed-off-by: Ricardo Koller <[email protected]> Reviewed-by: Oliver Upton <[email protected]> Signed-off-by: Marc Zyngier <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2023-01-29KVM: selftests: aarch64: Fix check of dirty log PT writeRicardo Koller1-2/+5
The dirty log checks are mistakenly testing the first page in the page table (PT) memory region instead of the page holding the test data page PTE. This wasn't an issue before commit 406504c7b040 ("KVM: arm64: Fix S1PTW handling on RO memslots") as all PT pages (including the first page) were treated as writes. Fix the page_fault_test dirty logging tests by checking for the right page: the one for the PTE of the data test page. Fixes: a4edf25b3e25 ("KVM: selftests: aarch64: Add dirty logging tests into page_fault_test") Signed-off-by: Ricardo Koller <[email protected]> Reviewed-by: Oliver Upton <[email protected]> Signed-off-by: Marc Zyngier <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2023-01-29KVM: selftests: aarch64: Do not default to dirty PTE pages on all S1PTWsRicardo Koller1-33/+60
Only Stage1 Page table walks (S1PTW) trying to write into a PTE should result in the PTE page being dirty in the log. However, the dirty log tests in page_fault_test default to treat all S1PTW accesses as writes. Fix the relevant tests by asserting dirty pages only for S1PTW writes, which in these tests only applies to when Hardware management of the Access Flag is enabled. Signed-off-by: Ricardo Koller <[email protected]> Reviewed-by: Oliver Upton <[email protected]> Signed-off-by: Marc Zyngier <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2023-01-29KVM: selftests: aarch64: Relax userfaultfd read vs. write checksRicardo Koller1-49/+34
Only Stage1 Page table walks (S1PTW) writing a PTE on an unmapped page should result in a userfaultfd write. However, the userfaultfd tests in page_fault_test wrongly assert that any S1PTW is a PTE write. Fix this by relaxing the read vs. write checks in all userfaultfd handlers. Note that this is also an attempt to focus less on KVM (and userfaultfd) behavior, and more on architectural behavior. Also note that after commit 406504c7b040 ("KVM: arm64: Fix S1PTW handling on RO memslots"), the userfaultfd fault (S1PTW with AF on an unmaped PTE page) is actually a read: the translation fault that comes before the permission fault. Signed-off-by: Ricardo Koller <[email protected]> Reviewed-by: Oliver Upton <[email protected]> Signed-off-by: Marc Zyngier <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2023-01-28libbpf: Fix BPF_PROBE_READ{_STR}_INTO() on s390xIlya Leoshkevich1-2/+2
BPF_PROBE_READ_INTO() and BPF_PROBE_READ_STR_INTO() should map to bpf_probe_read() and bpf_probe_read_str() respectively in order to work correctly on architectures with !ARCH_HAS_NON_OVERLAPPING_ADDRESS_SPACE. Signed-off-by: Ilya Leoshkevich <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Alexei Starovoitov <[email protected]>
2023-01-28libbpf: Fix unbounded memory access in bpf_usdt_arg()Ilya Leoshkevich1-1/+4
Loading programs that use bpf_usdt_arg() on s390x fails with: ; if (arg_num >= BPF_USDT_MAX_ARG_CNT || arg_num >= spec->arg_cnt) 128: (79) r1 = *(u64 *)(r10 -24) ; frame1: R1_w=scalar(umax=4294967295,var_off=(0x0; 0xffffffff)) R10=fp0 129: (25) if r1 > 0xb goto pc+83 ; frame1: R1_w=scalar(umax=11,var_off=(0x0; 0xf)) ... ; arg_spec = &spec->args[arg_num]; 135: (79) r1 = *(u64 *)(r10 -24) ; frame1: R1_w=scalar(umax=4294967295,var_off=(0x0; 0xffffffff)) R10=fp0 ... ; switch (arg_spec->arg_type) { 139: (61) r1 = *(u32 *)(r2 +8) R2 unbounded memory access, make sure to bounds check any such access The reason is that, even though the C code enforces that arg_num < BPF_USDT_MAX_ARG_CNT, the verifier cannot propagate this constraint to the arg_spec assignment yet. Help it by forcing r1 back to stack after comparison. Signed-off-by: Ilya Leoshkevich <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Alexei Starovoitov <[email protected]>
2023-01-28libbpf: Simplify barrier_var()Ilya Leoshkevich1-1/+1
Use a single "+r" constraint instead of the separate "=r" and "0". Signed-off-by: Ilya Leoshkevich <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Alexei Starovoitov <[email protected]>
2023-01-28selftests/bpf: Fix profiler on s390xIlya Leoshkevich1-24/+38
Use bpf_probe_read_kernel() and bpf_probe_read_kernel_str() instead of bpf_probe_read() and bpf_probe_read_kernel(). Signed-off-by: Ilya Leoshkevich <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Alexei Starovoitov <[email protected]>
2023-01-28selftests/bpf: Fix xdp_synproxy/tc on s390xIlya Leoshkevich1-1/+1
Use the correct datatype for the values map values; currently the test works by accident, since on little-endian machines it is sometimes acceptable to access u64 as u32. Signed-off-by: Ilya Leoshkevich <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Alexei Starovoitov <[email protected]>
2023-01-28selftests/bpf: Fix vmlinux test on s390xIlya Leoshkevich1-2/+2
Use a syscall macro to access the nanosleep()'s first argument; currently the code uses gprs[2] instead of orig_gpr2. Signed-off-by: Ilya Leoshkevich <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Alexei Starovoitov <[email protected]>
2023-01-28selftests/bpf: Fix test_xdp_adjust_tail_grow2 on s390xIlya Leoshkevich2-2/+13
s390x cache line size is 256 bytes, so skb_shared_info must be aligned on a much larger boundary than for x86. Signed-off-by: Ilya Leoshkevich <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Alexei Starovoitov <[email protected]>
2023-01-28selftests/bpf: Fix test_lsm on s390xIlya Leoshkevich1-3/+4
Use syscall macros to access the setdomainname() arguments; currently the code uses gprs[2] instead of orig_gpr2 for the first argument. Signed-off-by: Ilya Leoshkevich <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Alexei Starovoitov <[email protected]>
Powered by cgit, Gruvboxed by Blaster4385.