aboutsummaryrefslogtreecommitdiff
path: root/tools
AgeCommit message (Collapse)AuthorFilesLines
2022-12-02KVM: arm64: selftests: Enable single-step without a "full" ucall()Sean Christopherson2-10/+19
Add a new ucall hook, GUEST_UCALL_NONE(), to allow tests to make ucalls without allocating a ucall struct, and use it to enable single-step in ARM's debug-exceptions test. Like the disable single-step path, the enabling path also needs to ensure that no exclusive access sequences are attempted after enabling single-step, as the exclusive monitor is cleared on ERET from the debug exception taken to EL2. The test currently "works" because clear_bit() isn't actually an atomic operation... yet. Signed-off-by: Sean Christopherson <[email protected]> Message-Id: <[email protected]> Signed-off-by: Paolo Bonzini <[email protected]>
2022-12-02Merge tag 'kvm-x86-fixes-6.2-1' of https://github.com/kvm-x86/linux into HEADPaolo Bonzini2-0/+49
Misc KVM x86 fixes and cleanups for 6.2: - One-off fixes for various emulation flows (SGX, VMXON, NRIPS=0). - Reinstate IBPB on emulated VM-Exit that was incorrectly dropped a few years back when eliminating unnecessary barriers when switching between vmcs01 and vmcs02. - Clean up the MSR filter docs. - Clean up vmread_error_trampoline() to make it more obvious that params must be passed on the stack, even for x86-64. - Let userspace set all supported bits in MSR_IA32_FEAT_CTL irrespective of the current guest CPUID. - Fudge around a race with TSC refinement that results in KVM incorrectly thinking a guest needs TSC scaling when running on a CPU with a constant TSC, but no hardware-enumerated TSC frequency.
2022-12-02Merge tag 'kvm-selftests-6.2-2' of https://github.com/kvm-x86/linux into HEADPaolo Bonzini5-63/+91
KVM selftests fixes for 6.2 - Fix an inverted check in the access tracking perf test, and restore support for asserting that there aren't too many idle pages when running on bare metal. - Fix an ordering issue in the AMX test introduced by recent conversions to use kvm_cpu_has(), and harden the code to guard against similar bugs in the future. Anything that tiggers caching of KVM's supported CPUID, kvm_cpu_has() in this case, effectively hides opt-in XSAVE features if the caching occurs before the test opts in via prctl(). - Fix build errors that occur in certain setups (unsure exactly what is unique about the problematic setup) due to glibc overriding static_assert() to a variant that requires a custom message.
2022-12-02KVM: Reference to kvm_userspace_memory_region in doc and commentsJavier Martinez Canillas1-3/+3
There are still references to the removed kvm_memory_region data structure but the doc and comments should mention struct kvm_userspace_memory_region instead, since that is what's used by the ioctl that replaced the old one and this data structure support the same set of flags. Signed-off-by: Javier Martinez Canillas <[email protected]> Message-Id: <[email protected]> Signed-off-by: Paolo Bonzini <[email protected]>
2022-12-02KVM: Delete all references to removed KVM_SET_MEMORY_ALIAS ioctlJavier Martinez Canillas2-10/+0
The documentation says that the ioctl has been deprecated, but it has been actually removed and the remaining references are just left overs. Suggested-by: Sean Christopherson <[email protected]> Signed-off-by: Javier Martinez Canillas <[email protected]> Message-Id: <[email protected]> Signed-off-by: Paolo Bonzini <[email protected]>
2022-12-02KVM: Delete all references to removed KVM_SET_MEMORY_REGION ioctlJavier Martinez Canillas1-12/+0
The documentation says that the ioctl has been deprecated, but it has been actually removed and the remaining references are just left overs. Suggested-by: Sean Christopherson <[email protected]> Signed-off-by: Javier Martinez Canillas <[email protected]> Message-Id: <[email protected]> Signed-off-by: Paolo Bonzini <[email protected]>
2022-12-02selftests/ftrace: Use long for synthetic event probe testSteven Rostedt (Google)1-1/+1
On 32bit the trigger-synthetic-eprobe.tc selftest fails with the error: hist:syscalls:sys_exit_openat: error: Param type doesn't match synthetic event field type Command: hist:keys=common_pid:filename=$__arg__1,ret=ret:onmatch(syscalls.sys_enter_openat).trace(synth_open,$filename,$ret) ^ This is because the synth_open synthetic event is created with: echo "$SYNTH u64 filename; s64 ret;" > synthetic_events Which works fine on 64 bit, as filename is a pointer and the return is also a long. But for 32 bit architectures, it doesn't work. Use "unsigned long" and "long" instead so that it works for both 64 bit and 32 bit architectures. Signed-off-by: Steven Rostedt (Google) <[email protected]> Signed-off-by: Shuah Khan <[email protected]>
2022-12-02Merge tag 'v6.1-rc7' into iommufd.git for-nextJason Gunthorpe45-138/+36643
Resolve conflicts in drivers/vfio/vfio_main.c by using the iommfd version. The rc fix was done a different way when iommufd patches reworked this code. Signed-off-by: Jason Gunthorpe <[email protected]>
2022-12-02selftests/powerpc: Add ptrace setup_core_pattern() null-terminatorBenjamin Gray1-1/+3
- malloc() does not zero the buffer, - fread() does not null-terminate it's output, - `cat /proc/sys/kernel/core_pattern | hexdump -C` shows the file is not inherently null-terminated So using string operations on the buffer is risky. Explicitly add a null character to the end to make it safer. Signed-off-by: Benjamin Gray <[email protected]> Signed-off-by: Michael Ellerman <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2022-12-02selftests/powerpc: Use mfspr/mtspr macrosBenjamin Gray4-21/+10
No need to write inline asm for mtspr/mfspr, we have macros for this in reg.h Signed-off-by: Benjamin Gray <[email protected]> Reviewed-by: Andrew Donnellan <[email protected]> Signed-off-by: Michael Ellerman <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2022-12-02selftests: powerpc: Use "grep -E" instead of "egrep"Tiezhu Yang1-1/+1
The latest version of grep claims the egrep is now obsolete so the build now contains warnings that look like: egrep: warning: egrep is obsolescent; using grep -E fix this using "grep -E" instead. sed -i "s/egrep/grep -E/g" `grep egrep -rwl tools/testing/selftests/powerpc` Here are the steps to install the latest grep: wget http://ftp.gnu.org/gnu/grep/grep-3.8.tar.gz tar xf grep-3.8.tar.gz cd grep-3.8 && ./configure && make sudo make install export PATH=/usr/local/bin:$PATH Signed-off-by: Tiezhu Yang <[email protected]> Signed-off-by: Michael Ellerman <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2022-12-01selftests: Add a basic HSR test.Sebastian Andrzej Siewior4-0/+268
This test adds a basic HSRv0 network with 3 nodes. In its current shape it sends and forwards packets, announcements and so merges nodes based on MAC A/B information. It is able to detect duplicate packets and packetloss should any occur. Cc: Shuah Khan <[email protected]> Signed-off-by: Sebastian Andrzej Siewior <[email protected]> Signed-off-by: Jakub Kicinski <[email protected]>
2022-12-01selftests: mptcp: listener test for in-kernel PMGeliang Tang1-1/+57
This patch adds test coverage for listening sockets created by the in-kernel path manager in mptcp_join.sh. It adds the listener event checking in the existing "remove single address with port" test. The output looks like this: 003 remove single address with port syn[ ok ] - synack[ ok ] - ack[ ok ] add[ ok ] - echo [ ok ] - pt [ ok ] syn[ ok ] - synack[ ok ] - ack[ ok ] syn[ ok ] - ack [ ok ] rm [ ok ] - rmsf [ ok ] invert CREATE_LISTENER 10.0.2.1:10100[ ok ] CLOSE_LISTENER 10.0.2.1:10100 [ ok ] Signed-off-by: Geliang Tang <[email protected]> Reviewed-by: Mat Martineau <[email protected]> Signed-off-by: Matthieu Baerts <[email protected]> Signed-off-by: Jakub Kicinski <[email protected]>
2022-12-01selftests: mptcp: make evts global in mptcp_joinGeliang Tang1-23/+29
This patch moves evts_ns1 and evts_ns2 out of do_transfer() as two global variables in mptcp_join.sh. Init them in init() and remove them in cleanup(). Add a new helper reset_with_events() to save the outputs of 'pm_nl_ctl events' command in them. And a new helper kill_events_pids() to kill pids of 'pm_nl_ctl events' command. Use these helpers in userspace pm tests. Suggested-by: Paolo Abeni <[email protected]> Signed-off-by: Geliang Tang <[email protected]> Acked-by: Paolo Abeni <[email protected]> Signed-off-by: Matthieu Baerts <[email protected]> Signed-off-by: Jakub Kicinski <[email protected]>
2022-12-01selftests: mptcp: listener test for userspace PMGeliang Tang1-0/+76
This patch adds test coverage for listening sockets created by userspace processes. It adds a new test named test_listener() and a new verifying helper verify_listener_events(). The new output looks like this: CREATE_SUBFLOW 10.0.2.2 (ns2) => 10.0.2.1 (ns1) [OK] DESTROY_SUBFLOW 10.0.2.2 (ns2) => 10.0.2.1 (ns1) [OK] MP_PRIO TX [OK] MP_PRIO RX [OK] CREATE_LISTENER 10.0.2.2:37106 [OK] CLOSE_LISTENER 10.0.2.2:37106 [OK] Signed-off-by: Geliang Tang <[email protected]> Reviewed-by: Mat Martineau <[email protected]> Signed-off-by: Matthieu Baerts <[email protected]> Signed-off-by: Jakub Kicinski <[email protected]>
2022-12-01selftests: mptcp: make evts global in userspace_pmGeliang Tang1-120/+93
This patch makes server_evts and client_evts global in userspace_pm.sh, then these two variables could be used in test_announce(), test_remove() and test_subflows(). The local variable 'evts' in these three functions then could be dropped. Also move local variable 'file' as a global one. Suggested-by: Paolo Abeni <[email protected]> Signed-off-by: Geliang Tang <[email protected]> Acked-by: Paolo Abeni <[email protected]> Signed-off-by: Matthieu Baerts <[email protected]> Signed-off-by: Jakub Kicinski <[email protected]>
2022-12-01selftests: mptcp: enhance userspace pm testsGeliang Tang2-4/+6
Some userspace pm tests failed since pm listener events have been added. Now MPTCP_EVENT_LISTENER_CREATED event becomes the first item in the events list like this: type:15,family:2,sport:10006,saddr4:0.0.0.0 type:1,token:3701282876,server_side:1,family:2,saddr4:10.0.1.1,... And no token value in this MPTCP_EVENT_LISTENER_CREATED event. This patch fixes this by specifying the type 1 item to search for token values. Signed-off-by: Geliang Tang <[email protected]> Reviewed-by: Mat Martineau <[email protected]> Signed-off-by: Matthieu Baerts <[email protected]> Signed-off-by: Jakub Kicinski <[email protected]>
2022-12-01selftests: mptcp: declare var as localMatthieu Baerts1-22/+29
Just to avoid classical Bash pitfall where variables are accidentally overridden by other functions because the proper scope has not been defined. That's also what is done in other MPTCP selftests scripts where all non local variables are defined at the beginning of the script and the others are defined with the "local" keyword. Reviewed-by: Mat Martineau <[email protected]> Signed-off-by: Matthieu Baerts <[email protected]> Signed-off-by: Jakub Kicinski <[email protected]>
2022-12-01selftests: mptcp: clearly declare global ns varsMatthieu Baerts1-8/+6
It is clearer to declare these global variables at the beginning of the file as it is done in other MPTCP selftests rather than in functions in the middle of the script. So for uniformity reason, we can do the same here in mptcp_sockopt.sh. Suggested-by: Geliang Tang <[email protected]> Reviewed-by: Mat Martineau <[email protected]> Signed-off-by: Matthieu Baerts <[email protected]> Signed-off-by: Jakub Kicinski <[email protected]>
2022-12-01selftests: mptcp: uniform 'rndh' variableMatthieu Baerts6-5/+9
The definition of 'rndh' was probably copied from one script to another but some times, 'sec' was not defined, not used and/or not spelled properly. Here all the 'rndh' are now defined the same way. Reviewed-by: Mat Martineau <[email protected]> Signed-off-by: Matthieu Baerts <[email protected]> Signed-off-by: Jakub Kicinski <[email protected]>
2022-12-01selftests: mptcp: removed defined but unused varsMatthieu Baerts3-7/+0
Some variables were set but never used. This was not causing any issues except adding some confusion and having shellcheck complaining about them. Reviewed-by: Mat Martineau <[email protected]> Signed-off-by: Matthieu Baerts <[email protected]> Signed-off-by: Jakub Kicinski <[email protected]>
2022-12-01selftests: mptcp: run mptcp_inq from a clean netnsMatthieu Baerts1-4/+1
A new "sandbox" net namespace is available where no other netfilter rules have been added. Use this new netns instead of re-using "ns1" and clean it. Reviewed-by: Mat Martineau <[email protected]> Signed-off-by: Matthieu Baerts <[email protected]> Signed-off-by: Jakub Kicinski <[email protected]>
2022-12-01selftests/bpf: Validate multiple ref release_on_unlock logicDave Marchevsky1-1/+16
Modify list_push_pop_multiple to alloc and insert nodes 2-at-a-time. Without the previous patch's fix, this block of code: bpf_spin_lock(lock); bpf_list_push_front(head, &f[i]->node); bpf_list_push_front(head, &f[i + 1]->node); bpf_spin_unlock(lock); would fail check_reference_leak check as release_on_unlock logic would miss a ref that should've been released. Signed-off-by: Dave Marchevsky <[email protected]> cc: Kumar Kartikeya Dwivedi <[email protected]> Acked-by: Yonghong Song <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Alexei Starovoitov <[email protected]>
2022-12-01KVM: selftests: Define and use a custom static assert in lib headersSean Christopherson2-12/+24
Define and use kvm_static_assert() in the common KVM selftests headers to provide deterministic behavior, and to allow creating static asserts without dummy messages. The kernel's static_assert() makes the message param optional, and on the surface, tools/include/linux/build_bug.h appears to follow suit. However, glibc may override static_assert() and redefine it as a direct alias of _Static_assert(), which makes the message parameter mandatory. This leads to non-deterministic behavior as KVM selftests code that utilizes static_assert() without a custom message may or not compile depending on the order of includes. E.g. recently added asserts in x86_64/processor.h fail on some systems with errors like In file included from lib/memstress.c:11:0: include/x86_64/processor.h: In function ‘this_cpu_has_p’: include/x86_64/processor.h:193:34: error: expected ‘,’ before ‘)’ token static_assert(low_bit < high_bit); \ ^ due to _Static_assert() expecting a comma before a message. The "message optional" version of static_assert() uses macro magic to strip away the comma when presented with empty an __VA_ARGS__ #ifndef static_assert #define static_assert(expr, ...) __static_assert(expr, ##__VA_ARGS__, #expr) #define __static_assert(expr, msg, ...) _Static_assert(expr, msg) #endif // static_assert and effectively generates "_Static_assert(expr, #expr)". The incompatible version of static_assert() gets defined by this snippet in /usr/include/assert.h: #if defined __USE_ISOC11 && !defined __cplusplus # undef static_assert # define static_assert _Static_assert #endif which yields "_Static_assert(expr)" and thus fails as above. KVM selftests don't actually care about using C11, but __USE_ISOC11 gets defined because of _GNU_SOURCE, which many tests do #define. _GNU_SOURCE triggers a massive pile of defines in /usr/include/features.h, including _ISOC11_SOURCE: /* If _GNU_SOURCE was defined by the user, turn on all the other features. */ #ifdef _GNU_SOURCE # undef _ISOC95_SOURCE # define _ISOC95_SOURCE 1 # undef _ISOC99_SOURCE # define _ISOC99_SOURCE 1 # undef _ISOC11_SOURCE # define _ISOC11_SOURCE 1 # undef _POSIX_SOURCE # define _POSIX_SOURCE 1 # undef _POSIX_C_SOURCE # define _POSIX_C_SOURCE 200809L # undef _XOPEN_SOURCE # define _XOPEN_SOURCE 700 # undef _XOPEN_SOURCE_EXTENDED # define _XOPEN_SOURCE_EXTENDED 1 # undef _LARGEFILE64_SOURCE # define _LARGEFILE64_SOURCE 1 # undef _DEFAULT_SOURCE # define _DEFAULT_SOURCE 1 # undef _ATFILE_SOURCE # define _ATFILE_SOURCE 1 #endif which further down in /usr/include/features.h leads to: /* This is to enable the ISO C11 extension. */ #if (defined _ISOC11_SOURCE \ || (defined __STDC_VERSION__ && __STDC_VERSION__ >= 201112L)) # define __USE_ISOC11 1 #endif To make matters worse, /usr/include/assert.h doesn't guard against multiple inclusion by turning itself into a nop, but instead #undefs a few macros and continues on. As a result, it's all but impossible to ensure the "message optional" version of static_assert() will actually be used, e.g. explicitly including assert.h and #undef'ing static_assert() doesn't work as a later inclusion of assert.h will again redefine its version. #ifdef _ASSERT_H # undef _ASSERT_H # undef assert # undef __ASSERT_VOID_CAST # ifdef __USE_GNU # undef assert_perror # endif #endif /* assert.h */ #define _ASSERT_H 1 #include <features.h> Fixes: fcba483e8246 ("KVM: selftests: Sanity check input to ioctls() at build time") Fixes: ee3795536664 ("KVM: selftests: Refactor X86_FEATURE_* framework to prep for X86_PROPERTY_*") Fixes: 53a7dc0f215e ("KVM: selftests: Add X86_PROPERTY_* framework to retrieve CPUID values") Signed-off-by: Sean Christopherson <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2022-12-01KVM: selftests: Do kvm_cpu_has() checks before creating VM+vCPUSean Christopherson1-3/+7
Move the AMX test's kvm_cpu_has() checks before creating the VM+vCPU, there are no dependencies between the two operations. Opportunistically add a comment to call out that enabling off-by-default XSAVE-managed features must be done before KVM_GET_SUPPORTED_CPUID is cached. Signed-off-by: Sean Christopherson <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2022-12-01KVM: selftests: Disallow "get supported CPUID" before REQ_XCOMP_GUEST_PERMSean Christopherson1-6/+12
Disallow using kvm_get_supported_cpuid() and thus caching KVM's supported CPUID info before enabling XSAVE-managed features that are off-by-default and must be enabled by ARCH_REQ_XCOMP_GUEST_PERM. Caching the supported CPUID before all XSAVE features are enabled can result in false negatives due to testing features that were cached before they were enabled. Signed-off-by: Sean Christopherson <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2022-12-01KVM: selftests: Move __vm_xsave_require_permission() below CPUID helpersSean Christopherson1-32/+32
Move __vm_xsave_require_permission() below the CPUID helpers so that a future change can reference the cached result of KVM_GET_SUPPORTED_CPUID while keeping the definition of the variable close to its intended user, kvm_get_supported_cpuid(). No functional change intended. Signed-off-by: Sean Christopherson <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2022-12-01KVM: selftests: Move XFD CPUID checking out of __vm_xsave_require_permission()Lei Wang2-2/+1
Move the kvm_cpu_has() check on X86_FEATURE_XFD out of the helper to enable off-by-default XSAVE-managed features and into the one test that currenty requires XFD (XFeature Disable) support. kvm_cpu_has() uses kvm_get_supported_cpuid() and thus caches KVM_GET_SUPPORTED_CPUID, and so using kvm_cpu_has() before ARCH_REQ_XCOMP_GUEST_PERM effectively results in the test caching stale values, e.g. subsequent checks on AMX_TILE will get false negatives. Although off-by-default features are nonsensical without XFD, checking for XFD virtualization prior to enabling such features isn't strictly required. Signed-off-by: Lei Wang <[email protected]> Fixes: 7fbb653e01fd ("KVM: selftests: Check KVM's supported CPUID, not host CPUID, for XFD") Link: https://lore.kernel.org/r/[email protected] [sean: add Fixes, reword changelog] Signed-off-by: Sean Christopherson <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2022-12-01KVM: selftests: Restore assert for non-nested VMs in access tracking testSean Christopherson2-5/+13
Restore the assert (on x86-64) that <10% of pages are still idle when NOT running as a nested VM in the access tracking test. The original assert was converted to a "warning" to avoid false failures when running the test in a VM, but the non-nested case does not suffer from the same "infinite TLB size" issue. Using the HYPERVISOR flag isn't infallible as VMMs aren't strictly required to enumerate the "feature" in CPUID, but practically speaking anyone that is running KVM selftests in VMs is going to be using a VMM and hypervisor that sets the HYPERVISOR flag. Cc: David Matlack <[email protected]> Reviewed-by: Emanuele Giuseppe Esposito <[email protected]> Signed-off-by: Sean Christopherson <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2022-12-01KVM: selftests: Fix inverted "warning" in access tracking perf testSean Christopherson1-4/+3
Warn if the number of idle pages is greater than or equal to 10% of the total number of pages, not if the percentage of idle pages is less than 10%. The original code asserted that less than 10% of pages were still idle, but the check got inverted when the assert was converted to a warning. Opportunistically clean up the warning; selftests are 64-bit only, there is no need to use "%PRIu64" instead of "%lu". Fixes: 6336a810db5c ("KVM: selftests: replace assertion with warning in access_tracking_perf_test") Reviewed-by: Emanuele Giuseppe Esposito <[email protected]> Signed-off-by: Sean Christopherson <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2022-12-01libnvdimm: Introduce CONFIG_NVDIMM_SECURITY_TEST flagDave Jiang2-31/+0
nfit_test overrode the security_show() sysfs attribute function in nvdimm dimm_devs in order to allow testing of security unlock. With the introduction of CXL security commands, the trick to override security_show() becomes significantly more complicated. By introdcing a security flag CONFIG_NVDIMM_SECURITY_TEST, libnvdimm can just toggle the check via a compile option. In addition the original override can can be removed from tools/testing/nvdimm/. The flag will also be used to bypass cpu_cache_invalidate_memregion() when set in a different commit. This allows testing on QEMU with nfit_test or cxl_test since cpu_cache_has_invalidate_memregion() checks whether X86_FEATURE_HYPERVISOR cpu feature flag is set on x86. Reviewed-by: Jonathan Cameron <[email protected]> Signed-off-by: Dave Jiang <[email protected]> Link: https://lore.kernel.org/r/166983618758.2734609.18031639517065867138.stgit@djiang5-desk3.ch.intel.com Signed-off-by: Dan Williams <[email protected]>
2022-12-01tools/testing/cxl: add mechanism to lock mem device for testingDave Jiang1-4/+44
The mock cxl mem devs needs a way to go into "locked" status to simulate when the platform is rebooted. Add a sysfs mechanism so the device security state is set to "locked" and the frozen state bits are cleared. Reviewed-by: Jonathan Cameron <[email protected]> Signed-off-by: Dave Jiang <[email protected]> Link: https://lore.kernel.org/r/166983617602.2734609.7042497620931694717.stgit@djiang5-desk3.ch.intel.com Signed-off-by: Dan Williams <[email protected]>
2022-12-01tools/testing/cxl: Add "passphrase secure erase" opcode supportDave Jiang1-0/+102
Add support to emulate a CXL mem device support the "passphrase secure erase" operation. Reviewed-by: Jonathan Cameron <[email protected]> Signed-off-by: Dave Jiang <[email protected]> Link: https://lore.kernel.org/r/166983615879.2734609.5177049043677443736.stgit@djiang5-desk3.ch.intel.com Signed-off-by: Dan Williams <[email protected]>
2022-12-01tools/testing/cxl: Add "Unlock" security opcode supportDave Jiang1-0/+45
Add support to emulate a CXL mem device support the "Unlock" operation. Reviewed-by: Jonathan Cameron <[email protected]> Signed-off-by: Dave Jiang <[email protected]> Link: https://lore.kernel.org/r/166983614730.2734609.2280484207184754073.stgit@djiang5-desk3.ch.intel.com Signed-off-by: Dan Williams <[email protected]>
2022-12-01tools/testing/cxl: Add "Freeze Security State" security opcode supportDave Jiang1-0/+20
Add support to emulate a CXL mem device support the "Freeze Security State" operation. Reviewed-by: Jonathan Cameron <[email protected]> Signed-off-by: Dave Jiang <[email protected]> Link: https://lore.kernel.org/r/166983613604.2734609.1960672960407811362.stgit@djiang5-desk3.ch.intel.com Signed-off-by: Dan Williams <[email protected]>
2022-12-01tools/testing/cxl: Add "Disable" security opcode supportDave Jiang1-0/+74
Add support to emulate a CXL mem device support the "Disable Passphrase" operation. The operation supports disabling of either a user or a master passphrase. The emulation will provide support for both user and master passphrase. Reviewed-by: Jonathan Cameron <[email protected]> Signed-off-by: Dave Jiang <[email protected]> Link: https://lore.kernel.org/r/166983612447.2734609.2767804273351656413.stgit@djiang5-desk3.ch.intel.com Signed-off-by: Dan Williams <[email protected]>
2022-12-01tools/testing/cxl: Add "Set Passphrase" opcode supportDave Jiang1-0/+88
Add support to emulate a CXL mem device supporting the "Set Passphrase" operation. The operation supports setting of either a user or a master passphrase. Reviewed-by: Jonathan Cameron <[email protected]> Reviewed-by: Davidlohr Bueso <[email protected]> Signed-off-by: Dave Jiang <[email protected]> Link: https://lore.kernel.org/r/166983611314.2734609.12996309794483934484.stgit@djiang5-desk3.ch.intel.com Signed-off-by: Dan Williams <[email protected]>
2022-12-01tools/testing/cxl: Add "Get Security State" opcode supportDave Jiang1-7/+37
Add the emulation support for handling "Get Security State" opcode for a CXL memory device for the cxl_test. The function will copy back device security state bitmask to the output payload. The security state data is added as platform_data for the mock mem device. Reviewed-by: Davidlohr Bueso <[email protected]> Reviewed-by: Jonathan Cameron <[email protected]> Signed-off-by: Dave Jiang <[email protected]> Link: https://lore.kernel.org/r/166983610177.2734609.4953959949148428755.stgit@djiang5-desk3.ch.intel.com Signed-off-by: Dan Williams <[email protected]>
2022-12-01kselftest/alsa: Add more coverage of sample rates and channel countsMark Brown1-3/+8
Now that we can skip unsupported configurations add some more test cases using that, cover 8kHz, 44.1kHz and 96kHz plus 8kHz mono and 48kHz 6 channel. 44.1kHz is a different clock base to the existing 48kHz tests and may therefore show problems with the clock configuration if only 8kHz based rates are really available (or help diagnose if bad clocking is due to only 44.1kHz based rates being supported). 8kHz mono and 48Hz 6 channel are real world formats and should show if clocking does not account for channel count properly. Signed-off-by: Mark Brown <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Takashi Iwai <[email protected]>
2022-12-01kselftest/alsa: Provide more meaningful names for testsMark Brown1-3/+3
Rather than just numbering the tests try to provide semi descriptive names for what the tests are trying to cover. This also has the advantage of meaning we can add more tests without having to keep the list of tests ordered by existing number which should make it easier to understand what we're testing and why. Signed-off-by: Mark Brown <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Takashi Iwai <[email protected]>
2022-12-01kselftest/alsa: Don't any configuration in the sample configMark Brown1-16/+19
The values in the one example configuration file we currently have are the default values for the two tests we have so there's no need to actually set them. Comment them out as examples, with a rename for the tests so that we can update the tests in the code more easily. Signed-off-by: Mark Brown <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Takashi Iwai <[email protected]>
2022-12-01kselftest/alsa: Report failures to set the requested channels as skipsMark Brown1-1/+8
If constraint selection gives us a number of channels other than the one that we asked for that isn't a failure, that is the device implementing constraints and advertising that it can't support whatever we asked for. Report such cases as a test skip rather than failure so we don't have false positives. Signed-off-by: Mark Brown <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Takashi Iwai <[email protected]>
2022-12-01kselftest/alsa: Report failures to set the requested sample rate as skipsMark Brown1-6/+17
If constraint selection gives us a sample rate other than the one that we asked for that isn't a failure, that is the device implementing sample rate constraints and advertising that it can't support whatever we asked for. Report such cases as a test skip rather than failure so we don't have false positives. Signed-off-by: Mark Brown <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Takashi Iwai <[email protected]>
2022-12-01kselftest/alsa: Refactor pcm-test to list the tests to run in a structMark Brown1-20/+33
In order to help make the list of tests a bit easier to maintain refactor things so we pass the tests around as a struct with the parameters in, enabling us to add new tests by adding to a table with comments saying what each of the number are. We could also use named initializers if we get more parameters. Signed-off-by: Mark Brown <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Takashi Iwai <[email protected]>
2022-12-01kselftest/arm64: Allow epoll_wait() to return more than one resultMark Brown1-9/+18
When everything is starting up we are likely to have a lot of child processes producing output at once. This means that we can reduce overhead a bit by allowing epoll_wait() to return more than one descriptor at once, it cuts down on the number of system calls we need to do which on virtual platforms where the syscall overhead is a bit more noticable and we're likely to have a lot more children active can make a small but noticable difference. On physical platforms the relatively small number of processes being run and vastly improved speeds push the effects of this change into the noise. Signed-off-by: Mark Brown <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Will Deacon <[email protected]>
2022-12-01kselftest/arm64: Don't drain output while spawning childrenMark Brown1-8/+0
Now we hold execution of the stress test programs until all children are started there is no need to drain output while that is happening. Signed-off-by: Mark Brown <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Will Deacon <[email protected]>
2022-12-01kselftest/arm64: Hold fp-stress children until they're all spawnedMark Brown1-1/+40
At present fp-stress has a bit of a thundering herd problem since the children it spawns start running immediately, meaning that they can start starving the parent process of CPU before it has even started all the children. This is much more severe on virtual platforms since they tend to support far more SVE and SME vector lengths, be slower in general and for some have issues with performance when simulating multiple CPUs. We can mitigate this problem by having all the child processes block before starting the test program, meaning that we at least have all the child processes started before we start heavily using CPU. We still have the same load issues while waiting for the actual stress test programs to start up and produce output but they're at least all ready to go before that kicks in, resulting in substantial reductions in overall runtime on some of the severely affected systems. One test was showing about 20% improvement. Signed-off-by: Mark Brown <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Will Deacon <[email protected]>
2022-12-01af_unix: Add test for sock_diag and UDIAG_SHOW_UID.Kuniyuki Iwashima3-1/+180
The test prog dumps a single AF_UNIX socket's UID with and without unshare(CLONE_NEWUSER) and checks if it matches the result of getuid(). Without the preceding patch, the test prog is killed by a NULL deref in sk_diag_dump_uid(). # ./diag_uid TAP version 13 1..2 # Starting 2 tests from 3 test cases. # RUN diag_uid.uid.1 ... BUG: kernel NULL pointer dereference, address: 0000000000000270 #PF: supervisor read access in kernel mode #PF: error_code(0x0000) - not-present page PGD 105212067 P4D 105212067 PUD 1051fe067 PMD 0 Oops: 0000 [#1] PREEMPT SMP NOPTI Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.0-1.amzn2022.0.1 04/01/2014 RIP: 0010:sk_diag_fill (./include/net/sock.h:920 net/unix/diag.c:119 net/unix/diag.c:170) ... # 1: Test terminated unexpectedly by signal 9 # FAIL diag_uid.uid.1 not ok 1 diag_uid.uid.1 # RUN diag_uid.uid_unshare.1 ... # 1: Test terminated by timeout # FAIL diag_uid.uid_unshare.1 not ok 2 diag_uid.uid_unshare.1 # FAILED: 0 / 2 tests passed. # Totals: pass:0 fail:2 xfail:0 xpass:0 skip:0 error:0 With the patch, the test succeeds. # ./diag_uid TAP version 13 1..2 # Starting 2 tests from 3 test cases. # RUN diag_uid.uid.1 ... # OK diag_uid.uid.1 ok 1 diag_uid.uid.1 # RUN diag_uid.uid_unshare.1 ... # OK diag_uid.uid_unshare.1 ok 2 diag_uid.uid_unshare.1 # PASSED: 2 / 2 tests passed. # Totals: pass:2 fail:0 xfail:0 xpass:0 skip:0 error:0 Signed-off-by: Kuniyuki Iwashima <[email protected]> Signed-off-by: Paolo Abeni <[email protected]>
2022-11-30cxl/pmem: Introduce nvdimm_security_ops with ->get_flags() operationDave Jiang1-0/+1
Add nvdimm_security_ops support for CXL memory device with the introduction of the ->get_flags() callback function. This is part of the "Persistent Memory Data-at-rest Security" command set for CXL memory device support. The ->get_flags() function provides the security state of the persistent memory device defined by the CXL 3.0 spec section 8.2.9.8.6.1. Reviewed-by: Jonathan Cameron <[email protected]> Signed-off-by: Dave Jiang <[email protected]> Link: https://lore.kernel.org/r/166983609611.2734609.13231854299523325319.stgit@djiang5-desk3.ch.intel.com Signed-off-by: Dan Williams <[email protected]>
2022-11-30KVM: selftests: Verify userspace can stuff IA32_FEATURE_CONTROL at willSean Christopherson2-0/+49
Verify the KVM allows userspace to set all supported bits in the IA32_FEATURE_CONTROL MSR irrespective of the current guest CPUID, and that all unsupported bits are rejected. Throw the testcase into vmx_msrs_test even though it's not technically a VMX MSR; it's close enough, and the most frequently feature controlled by the MSR is VMX. Signed-off-by: Sean Christopherson <[email protected]> Link: https://lore.kernel.org/r/[email protected]
Powered by cgit, Gruvboxed by Blaster4385.