aboutsummaryrefslogtreecommitdiff
path: root/tools
AgeCommit message (Collapse)AuthorFilesLines
2021-06-25selftests/powerpc: Use req_max_processed_len from sysfs NX capabilitiesHaren Myneni2-4/+17
On PowerVM, the hypervisor defines the maximum buffer length for each NX request and the kernel exported this value via sysfs. This patch reads this value if the sysfs entry is available and is used to limit the request length. Signed-off-by: Haren Myneni <[email protected]> Signed-off-by: Michael Ellerman <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2021-06-24selftests: kvm: Allows userspace to handle emulation errors.Aaron Lewis5-0/+317
This test exercises the feature KVM_CAP_EXIT_ON_EMULATION_FAILURE. When enabled, errors in the in-kernel instruction emulator are forwarded to userspace with the instruction bytes stored in the exit struct for KVM_EXIT_INTERNAL_ERROR. So, when the guest attempts to emulate an 'flds' instruction, which isn't able to be emulated in KVM, instead of failing, KVM sends the instruction to userspace to handle. For this test to work properly the module parameter 'allow_smaller_maxphyaddr' has to be set. Signed-off-by: Aaron Lewis <[email protected]> Reviewed-by: Jim Mattson <[email protected]> Message-Id: <[email protected]> Signed-off-by: Paolo Bonzini <[email protected]>
2021-06-24KVM: x86/mmu: Rename "nxe" role bit to "efer_nx" for macro shenanigansSean Christopherson1-2/+2
Rename "nxe" to "efer_nx" so that future macro magic can use the pattern <reg>_<bit> for all CR0, CR4, and EFER bits that included in the role. Using "efer_nx" also makes it clear that the role bit reflects EFER.NX, not the NX bit in the corresponding PTE. Signed-off-by: Sean Christopherson <[email protected]> Message-Id: <[email protected]> Signed-off-by: Paolo Bonzini <[email protected]>
2021-06-24KVM: selftests: Add selftest for KVM statistics data binary interfaceJing Zhang5-0/+256
Add selftest to check KVM stats descriptors validity. Reviewed-by: David Matlack <[email protected]> Reviewed-by: Ricardo Koller <[email protected]> Reviewed-by: Krish Sadhukhan <[email protected]> Tested-by: Fuad Tabba <[email protected]> #arm64 Signed-off-by: Jing Zhang <[email protected]> Message-Id: <[email protected]> Signed-off-by: Paolo Bonzini <[email protected]>
2021-06-24bootconfig/tracing/ktest: Add ktest examples of testing bootconfigSteven Rostedt (VMware)9-0/+385
bootconfig is a new feature that appends scripts onto the initrd, and the kernel executes the scripts as an extended kernel command line. Need to add tests to test that the happened. To test the bootconfig properly, the initrd needs to be updated and the kernel rebooted. ktest is the perfect solution to perform these tests. Add a example bootconfig.conf in the tools/testing/ktest/examples/include and example bootconfig scripts in tools/testing/ktest/examples/bootconfig and also include verifier scripts that ktest will install on the target and run to make sure that the bootconfig options in the scripts took place after the target rebooted with the new initrd update. Link: https://lkml.kernel.org/r/[email protected] Reviewed-by: Masami Hiramatsu <[email protected]> Signed-off-by: Steven Rostedt (VMware) <[email protected]>
2021-06-24perf top: Add cgroup support for perf top (-G)Joshua Martinez2-0/+20
Added callback option (-G) to support cgroups for 'perf top'. Added condition to make sure -cgroup and --all-cgroups aren't both enabled. Example: $perf top -e cycles -G system.slice/docker-6b95a5eb649c0d671eba3835f0d93973d05a088f3ae8602246bde37affb1ba3e.scope -a --stdio PerfTop: 3330 irqs/sec kernel:68.2% exact: 0.0% lost: 0/0 drop: 0/11075 [4000Hz cpu-clock], (all, 4 CPUs) ------------------------------------------------------------------------------------------------------------------------------------------------------- 27.32% [unknown] [.] 0x00007f8ab7b69352 11.44% [kernel] [k] 0xffffffff968cd657 3.12% [kernel] [k] 0xffffffff96160e96 2.63% [kernel] [k] 0xffffffff96160eb0 1.96% [kernel] [k] 0xffffffff9615fcf6 1.42% [kernel] [k] 0xffffffff964ddfc7 1.09% [kernel] [k] 0xffffffff96160e90 0.81% [kernel] [k] 0xffffffff96160eb3 0.67% [kernel] [k] 0xffffffff9615fec1 0.57% [kernel] [k] 0xffffffff961ee1d0 0.53% [unknown] [.] 0x00007f8ab7b6666c 0.53% [kernel] [k] 0xffffffff96160e64 0.52% [kernel] [k] 0xffffffff9616c303 0.51% [kernel] [k] 0xffffffffc08e7d50 ... Signed-off-by: Joshua Martinez <[email protected]> Reviewed-by: Ian Rogers <[email protected]> Cc: Alexander Shishkin <[email protected]> Cc: Jiri Olsa <[email protected]> Cc: Mark Rutland <[email protected]> Cc: Namhyung Kim <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: joshua martinez <[email protected]> Link: http://lore.kernel.org/lkml/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2021-06-24tools/testing: add a selftest for SO_NETNS_COOKIELorenz Bauer4-1/+64
Make sure that SO_NETNS_COOKIE returns a non-zero value, and that sockets from different namespaces have a distinct cookie value. Signed-off-by: Lorenz Bauer <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2021-06-24KVM: sefltests: Add x86-64 test to verify MMU reacts to CPUID updatesSean Christopherson4-0/+152
Add an x86-only test to verify that x86's MMU reacts to CPUID updates that impact the MMU. KVM has had multiple bugs where it fails to reconfigure the MMU after the guest's vCPU model changes. Sadly, this test is effectively limited to shadow paging because the hardware page walk handler doesn't support software disabling of GBPAGES support, and KVM doesn't manually walk the GVA->GPA on faults for performance reasons (doing so would large defeat the benefits of TDP). Don't require !TDP for the tests as there is still value in running the tests with TDP, even though the tests will fail (barring KVM hacks). E.g. KVM should not completely explode if MAXPHYADDR results in KVM using 4-level vs. 5-level paging for the guest. Signed-off-by: Sean Christopherson <[email protected]> Message-Id: <[email protected]> Signed-off-by: Paolo Bonzini <[email protected]>
2021-06-24KVM: selftests: Add hugepage support for x86-64Sean Christopherson2-25/+68
Add x86-64 hugepage support in the form of a x86-only variant of virt_pg_map() that takes an explicit page size. To keep things simple, follow the existing logic for 4k pages and disallow creating a hugepage if the upper-level entry is present, even if the desired pfn matches. Opportunistically fix a double "beyond beyond" reported by checkpatch. Signed-off-by: Sean Christopherson <[email protected]> Message-Id: <[email protected]> Signed-off-by: Paolo Bonzini <[email protected]>
2021-06-24KVM: selftests: Genericize upper level page table entry structSean Christopherson1-65/+26
In preparation for adding hugepage support, replace "pageMapL4Entry", "pageDirectoryPointerEntry", and "pageDirectoryEntry" with a common "pageUpperEntry", and add a helper to create an upper level entry. All upper level entries have the same layout, using unique structs provides minimal value and requires a non-trivial amount of code duplication. No functional change intended. Signed-off-by: Sean Christopherson <[email protected]> Message-Id: <[email protected]> Signed-off-by: Paolo Bonzini <[email protected]>
2021-06-24KVM: selftests: Add PTE helper for x86-64 in preparation for hugepagesSean Christopherson1-28/+31
Add a helper to retrieve a PTE pointer given a PFN, address, and level in preparation for adding hugepage support. No functional change intended. Signed-off-by: Sean Christopherson <[email protected]> Message-Id: <[email protected]> Signed-off-by: Paolo Bonzini <[email protected]>
2021-06-24KVM: selftests: Rename x86's page table "address" to "pfn"Sean Christopherson1-25/+22
Rename the "address" field to "pfn" in x86's page table structs to match reality. No functional change intended. Signed-off-by: Sean Christopherson <[email protected]> Message-Id: <[email protected]> Signed-off-by: Paolo Bonzini <[email protected]>
2021-06-24KVM: selftests: Add wrapper to allocate page table pageSean Christopherson6-39/+23
Add a helper to allocate a page for use in constructing the guest's page tables. All architectures have identical address and memslot requirements (which appear to be arbitrary anyways). No functional change intended. Signed-off-by: Sean Christopherson <[email protected]> Message-Id: <[email protected]> Signed-off-by: Paolo Bonzini <[email protected]>
2021-06-24KVM: selftests: Unconditionally allocate EPT tables in memslot 0Sean Christopherson4-22/+17
Drop the EPTP memslot param from all EPT helpers and shove the hardcoded '0' down to the vm_phy_page_alloc() calls. No functional change intended. Signed-off-by: Sean Christopherson <[email protected]> Message-Id: <[email protected]> Signed-off-by: Paolo Bonzini <[email protected]>
2021-06-24KVM: selftests: Unconditionally use memslot '0' for page table allocationsSean Christopherson16-35/+31
Drop the memslot param from virt_pg_map() and virt_map() and shove the hardcoded '0' down to the vm_phy_page_alloc() calls. No functional change intended. Signed-off-by: Sean Christopherson <[email protected]> Message-Id: <[email protected]> Signed-off-by: Paolo Bonzini <[email protected]>
2021-06-24KVM: selftests: Unconditionally use memslot 0 for vaddr allocationsSean Christopherson7-21/+18
Drop the memslot param(s) from vm_vaddr_alloc() now that all callers directly specific '0' as the memslot. Drop the memslot param from virt_pgd_alloc() as well since vm_vaddr_alloc() is its only user. I.e. shove the hardcoded '0' down to the vm_phy_pages_alloc() calls. No functional change intended. Signed-off-by: Sean Christopherson <[email protected]> Signed-off-by: Paolo Bonzini <[email protected]>
2021-06-24lkdtm/heap: Add init_on_alloc testsKees Cook2-0/+3
Add SLAB and page allocator tests for init_on_alloc. Testing for init_on_free was already happening via the poisoning tests. Signed-off-by: Kees Cook <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2021-06-24selftests/lkdtm: Enable various testable CONFIGsKees Cook1-0/+6
Add a handful of LKDTM-testable features that depend on certain CONFIGs so that they are visible in logs for CI systems that run the selftests. Others could be added, but may be seen as having too high a trade-off for general testing. Cc: [email protected] Suggested-by: Guillaume Tucker <[email protected]> Signed-off-by: Kees Cook <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2021-06-24lkdtm: Add CONFIG hints in errors where possibleKees Cook1-0/+1
For various failure conditions, try to include some details about where to look for reasons about the failure. Signed-off-by: Kees Cook <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2021-06-24lkdtm/heap: Add vmalloc linear overflow testKees Cook1-1/+2
Similar to the existing slab overflow and stack exhaustion tests, add VMALLOC_LINEAR_OVERFLOW (and rename the slab test SLAB_LINEAR_OVERFLOW). Additionally unmarks the test as destructive. (It should be safe in the face of misbehavior.) Signed-off-by: Kees Cook <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2021-06-24selftests/lkdtm: Fix expected text for free poisonKees Cook1-2/+2
Freed memory poisoning can be tested a few ways, so update the expected text to reflect the non-Oopsing alternative. Signed-off-by: Kees Cook <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2021-06-24selftests/lkdtm: Fix expected text for CR4 pinningKees Cook1-1/+1
The error text for CR4 pinning changed. Update the test to match. Fixes: a13b9d0b9721 ("x86/cpu: Use pinning mask for CR4 bits needing to be 0") Cc: [email protected] Signed-off-by: Kees Cook <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2021-06-24selftests/lkdtm: Avoid needing explicit sub-shellKees Cook1-4/+8
Some environments do not set $SHELL when running tests. There's no need to use $SHELL here anyway, since "cat" can be used to receive any delivered signals from the kernel. Additionally avoid using bash-isms in the command, and record stderr for posterity. Fixes: 46d1a0f03d66 ("selftests/lkdtm: Add tests for LKDTM targets") Cc: [email protected] Suggested-by: Guillaume Tucker <[email protected]> Suggested-by: David Laight <[email protected]> Signed-off-by: Kees Cook <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2021-06-24KVM: selftests: Use "standard" min virtual address for CPUID test allocSean Christopherson1-2/+1
Use KVM_UTIL_MIN_ADDR as the minimum for x86-64's CPUID array. The system page size was likely used as the minimum because _something_ had to be provided. Increasing the min from 0x1000 to 0x2000 should have no meaningful impact on the test, and will allow changing vm_vaddr_alloc() to use KVM_UTIL_MIN_VADDR as the default. Signed-off-by: Sean Christopherson <[email protected]> Message-Id: <[email protected]> Signed-off-by: Paolo Bonzini <[email protected]>
2021-06-24KVM: selftests: Use alloc page helper for xAPIC IPI testSean Christopherson1-1/+1
Use the common page allocation helper for the xAPIC IPI test, effectively raising the minimum virtual address from 0x1000 to 0x2000. Presumably the test won't explode if it can't get a page at address 0x1000... Cc: Peter Shier <[email protected]> Signed-off-by: Sean Christopherson <[email protected]> Message-Id: <[email protected]> Signed-off-by: Paolo Bonzini <[email protected]>
2021-06-24KVM: selftests: Use alloc_page helper for x86-64's GDT/IDT/TSS allocationsSean Christopherson1-6/+4
Switch to the vm_vaddr_alloc_page() helper for x86-64's "kernel" allocations now that the helper uses the same min virtual address as the open coded versions. No functional change intended. Signed-off-by: Sean Christopherson <[email protected]> Message-Id: <[email protected]> Signed-off-by: Paolo Bonzini <[email protected]>
2021-06-24KVM: selftests: Lower the min virtual address for misc page allocationsSean Christopherson1-1/+1
Reduce the minimum virtual address of page allocations from 0x10000 to KVM_UTIL_MIN_VADDR (0x2000). Both values appear to be completely arbitrary, and reducing the min to KVM_UTIL_MIN_VADDR will allow for additional consolidation of code. Signed-off-by: Sean Christopherson <[email protected]> Message-Id: <[email protected]> Signed-off-by: Paolo Bonzini <[email protected]>
2021-06-24KVM: selftests: Add helpers to allocate N pages of virtual memorySean Christopherson6-24/+59
Add wrappers to allocate 1 and N pages of memory using de facto standard values as the defaults for minimum virtual address, data memslot, and page table memslot. Convert all compatible users. No functional change intended. Signed-off-by: Sean Christopherson <[email protected]> Message-Id: <[email protected]> Signed-off-by: Paolo Bonzini <[email protected]>
2021-06-24KVM: selftests: Use "standard" min virtual address for Hyper-V pagesSean Christopherson1-1/+1
Use the de facto standard minimum virtual address for Hyper-V's hcall params page. It's the allocator's job to not double-allocate memory, i.e. there's no reason to force different regions for the params vs. hcall page. This will allow adding a page allocation helper with a "standard" minimum address. Signed-off-by: Sean Christopherson <[email protected]> Message-Id: <[email protected]> Signed-off-by: Paolo Bonzini <[email protected]>
2021-06-24KVM: selftests: Unconditionally use memslot 0 for x86's GDT/TSS setupSean Christopherson1-10/+8
Refactor x86's GDT/TSS allocations to for memslot '0' at its vm_addr_alloc() call sites instead of passing in '0' from on high. This is a step toward using a common helper for allocating pages. No functional change intended. Signed-off-by: Sean Christopherson <[email protected]> Message-Id: <[email protected]> Signed-off-by: Paolo Bonzini <[email protected]>
2021-06-24KVM: selftests: Unconditionally use memslot 0 when loading elf binarySean Christopherson6-10/+7
Use memslot '0' for all vm_vaddr_alloc() calls when loading the test binary. This is the first step toward adding a helper to handle page allocations with a default value for the target memslot. No functional change intended. Signed-off-by: Sean Christopherson <[email protected]> Message-Id: <[email protected]> Signed-off-by: Paolo Bonzini <[email protected]>
2021-06-24KVM: selftests: Zero out the correct page in the Hyper-V features testSean Christopherson1-1/+1
Fix an apparent copy-paste goof in hyperv_features where hcall_page (which is two pages, so technically just the first page) gets zeroed twice, and hcall_params gets zeroed none times. Signed-off-by: Sean Christopherson <[email protected]> Message-Id: <[email protected]> Signed-off-by: Paolo Bonzini <[email protected]>
2021-06-24KVM: selftests: Remove errant asm/barrier.h include to fix arm64 buildSean Christopherson1-1/+0
Drop an unnecessary include of asm/barrier.h from dirty_log_test.c to allow the test to build on arm64. arm64, s390, and x86 all build cleanly without the include (PPC and MIPS aren't supported in KVM's selftests). arm64's barrier.h includes linux/kasan-checks.h, which is not copied into tools/. In file included from ../../../../tools/include/asm/barrier.h:8, from dirty_log_test.c:19: .../arm64/include/asm/barrier.h:12:10: fatal error: linux/kasan-checks.h: No such file or directory 12 | #include <linux/kasan-checks.h> | ^~~~~~~~~~~~~~~~~~~~~~ compilation terminated. Fixes: 84292e565951 ("KVM: selftests: Add dirty ring buffer test") Cc: Peter Xu <[email protected]> Signed-off-by: Sean Christopherson <[email protected]> Message-Id: <[email protected]> Signed-off-by: Paolo Bonzini <[email protected]>
2021-06-24KVM: selftests: fix triple fault if ept=0 in dirty_log_testHou Wenlong4-8/+3
Commit 22f232d134e1 ("KVM: selftests: x86: Set supported CPUIDs on default VM") moved vcpu_set_cpuid into vm_create_with_vcpus, but dirty_log_test doesn't use it to create vm. So vcpu's CPUIDs is not set, the guest's pa_bits in kvm would be smaller than the value queried by userspace. However, the dirty track memory slot is in the highest GPA, the reserved bits in gpte would be set with wrong pa_bits. For shadow paging, page fault would fail in permission_fault and be injected into guest. Since guest doesn't have idt, it finally leads to vm_exit for triple fault. Move vcpu_set_cpuid into vm_vcpu_add_default to set supported CPUIDs on default vcpu, since almost all tests need it. Fixes: 22f232d134e1 ("KVM: selftests: x86: Set supported CPUIDs on default VM") Signed-off-by: Hou Wenlong <[email protected]> Message-Id: <411ea2173f89abce56fc1fca5af913ed9c5a89c9.1624351343.git.houwenlong93@linux.alibaba.com> Signed-off-by: Paolo Bonzini <[email protected]>
2021-06-24KVM: selftests: Fix mapping length truncation in m{,un}map()Zenghui Yu1-2/+2
max_mem_slots is now declared as uint32_t. The result of (0x200000 * 32767) is unexpectedly truncated to be 0xffe00000, whilst we actually need to allocate about, 63GB. Cast max_mem_slots to size_t in both mmap() and munmap() to fix the length truncation. We'll otherwise see the failure on arm64 thanks to the access_ok() checking in __kvm_set_memory_region(), as the unmapped VA happen to go beyond the task's allowed address space. # ./set_memory_region_test Allowed number of memory slots: 32767 Adding slots 0..32766, each memory region with 2048K size ==== Test Assertion Failure ==== set_memory_region_test.c:391: ret == 0 pid=94861 tid=94861 errno=22 - Invalid argument 1 0x00000000004015a7: test_add_max_memory_regions at set_memory_region_test.c:389 2 (inlined by) main at set_memory_region_test.c:426 3 0x0000ffffb8e67bdf: ?? ??:0 4 0x00000000004016db: _start at :? KVM_SET_USER_MEMORY_REGION IOCTL failed, rc: -1 errno: 22 slot: 2615 Fixes: 3bf0fcd75434 ("KVM: selftests: Speed up set_memory_region_test") Signed-off-by: Zenghui Yu <[email protected]> Message-Id: <[email protected]> Signed-off-by: Paolo Bonzini <[email protected]>
2021-06-24objtool: Don't make .altinstructions writableJosh Poimboeuf1-1/+1
When objtool creates the .altinstructions section, it sets the SHF_WRITE flag to make the section writable -- unless the section had already been previously created by the kernel. The mismatch between kernel-created and objtool-created section flags can cause failures with external tooling (kpatch-build). And the section doesn't need to be writable anyway. Make the section flags consistent with the kernel's. Fixes: 9bc0bb50727c ("objtool/x86: Rewrite retpoline thunk calls") Reported-by: Joe Lawrence <[email protected]> Signed-off-by: Josh Poimboeuf <[email protected]> Signed-off-by: Ingo Molnar <[email protected]> Link: https://lore.kernel.org/r/6c284ae89717889ea136f9f0064d914cd8329d31.1624462939.git.jpoimboe@redhat.com
2021-06-23selftests/sgx: remove checks for file execute permissionsDave Hansen1-13/+3
The SGX selftests can fail for a bunch of non-obvious reasons like 'noexec' permissions on /dev (which is the default *EVERYWHERE* it seems). A new test mistakenly also looked for +x permission on the /dev/sgx_enclave. File execute permissions really only apply to the ability of execve() to work on a file, *NOT* on the ability for an application to map the file with PROT_EXEC. SGX needs to mmap(PROT_EXEC), but doesn't need to execve() the device file. Remove the check. Fixes: 4284f7acb78b ("selftests/sgx: Improve error detection and messages") Reported-by: Tim Gardner <[email protected]> Cc: Jarkko Sakkinen <[email protected]> Cc: Reinette Chatre <[email protected]> Cc: Dave Hansen <[email protected]> Cc: Shuah Khan <[email protected]> Cc: [email protected] Cc: [email protected] Cc: [email protected] Tested-by: Reinette Chatre <[email protected]> Signed-off-by: Dave Hansen <[email protected]> Reviewed-by: Jarkko Sakkinen <[email protected]> Signed-off-by: Shuah Khan <[email protected]>
2021-06-23selftests/ftrace: fix event-no-pid on 1-core machineKrzysztof Kozlowski1-0/+7
When running event-no-pid test on small machines (e.g. cloud 1-core instance), other events might not happen: + cat trace + cnt=0 + [ 0 -eq 0 ] + fail No other events were recorded [15] event tracing - restricts events based on pid notrace filtering [FAIL] Schedule a simple sleep task to be sure that some other process events get recorded. Fixes: ebed9628f5c2 ("selftests/ftrace: Add test to test new set_event_notrace_pid file") Signed-off-by: Krzysztof Kozlowski <[email protected]> Acked-by: Steven Rostedt (VMware) <[email protected]> Signed-off-by: Shuah Khan <[email protected]>
2021-06-23kunit: Remove the unused all_tests.configDavid Gow1-3/+0
This isn't used anywhere. While it's possible that people were manually referencing it, the new default config (in default.config in the same path) provides equivalent functionality. Signed-off-by: David Gow <[email protected]> Reviewed-by: Brendan Higgins <[email protected]> Signed-off-by: Shuah Khan <[email protected]>
2021-06-23kunit: Move default config from arch/um -> tools/testing/kunitDavid Gow2-1/+4
The default .kunitconfig file is currently kept in arch/um/configs/kunit_defconfig, but -- with the impending QEMU patch -- will no-longer be exclusively used for UML-based kernels. Move it alongside the other KUnit configs in tools/testing/kunit/configs, and give it a name which matches the existing all_tests.config and broken_on_uml.config files. Also update the Getting Started documentation to point to the new file. Signed-off-by: David Gow <[email protected]> Reviewed-by: Brendan Higgins <[email protected]> Signed-off-by: Shuah Khan <[email protected]>
2021-06-23Merge git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpfDavid S. Miller2-1/+9
Daniel Borkmann says: ==================== pull-request: bpf 2021-06-23 The following pull-request contains BPF updates for your *net* tree. We've added 14 non-merge commits during the last 6 day(s) which contain a total of 13 files changed, 137 insertions(+), 64 deletions(-). Note that when you merge net into net-next, there is a small merge conflict between 9f2470fbc4cb ("skmsg: Improve udp_bpf_recvmsg() accuracy") from bpf with c49661aa6f70 ("skmsg: Remove unused parameters of sk_msg_wait_data()") from net-next. Resolution is to: i) net/ipv4/udp_bpf.c: take udp_msg_wait_data() and remove err parameter from the function, ii) net/ipv4/tcp_bpf.c: take tcp_msg_wait_data() and remove err parameter from the function, iii) for net/core/skmsg.c and include/linux/skmsg.h: remove the sk_msg_wait_data() implementation and its prototype in header. The main changes are: 1) Fix BPF poke descriptor adjustments after insn rewrite, from John Fastabend. 2) Fix regression when using BPF_OBJ_GET with non-O_RDWR flags, from Maciej Żenczykowski. 3) Various bug and error handling fixes for UDP-related sock_map, from Cong Wang. 4) Fix patching of vmlinux BTF IDs with correct endianness, from Tony Ambardar. 5) Two fixes for TX descriptor validation in AF_XDP, from Magnus Karlsson. 6) Fix overflow in size calculation for bpf_map_area_alloc(), from Bui Quang Minh. ==================== Signed-off-by: David S. Miller <[email protected]>
2021-06-23selftests: icmp_redirect: support expected failuresAndrea Righi1-1/+7
According to a comment in commit 99513cfa16c6 ("selftest: Fixes for icmp_redirect test") the test "IPv6: mtu exception plus redirect" is expected to fail, because of a bug in the IPv6 logic that hasn't been fixed yet apparently. We should probably consider this failure as an "expected failure", therefore change the script to return XFAIL for that particular test and also report the total amount of expected failures at the end of the run. Signed-off-by: Andrea Righi <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2021-06-23Merge x86/urgent into x86/fpuBorislav Petkov121-904/+3424
Pick up dependent changes which either went mainline (x86/urgent is based on -rc7 and that contains them) as urgent fixes and the current x86/urgent branch which contains two more urgent fixes, so that the bigger FPU rework can base off ontop. Signed-off-by: Borislav Petkov <[email protected]>
2021-06-23Merge branch 'topic/ppc-kvm' of ↵Paolo Bonzini31-44/+293
https://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux into HEAD - Support for the H_RPT_INVALIDATE hypercall - Conversion of Book3S entry/exit to C - Bug fixes
2021-06-22selftests: mptcp: turn rp_filter off on each NICYonglong Li1-1/+2
To turn rp_filter off we should: echo 0 > /proc/sys/net/ipv4/conf/default/rp_filter and echo 0 > /proc/sys/net/ipv4/conf/all/rp_filter before NIC created. Co-developed-by: Paolo Abeni <[email protected]> Signed-off-by: Paolo Abeni <[email protected]> Signed-off-by: Yonglong Li <[email protected]> Signed-off-by: Mat Martineau <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2021-06-22selftests: mptcp: add deny_join_id0 testcasesGeliang Tang1-1/+74
This patch added a new argument '-d' for mptcp_join.sh script, to invoke the testcases for the MP_CAPABLE 'C' flag. Acked-by: Paolo Abeni <[email protected]> Signed-off-by: Geliang Tang <[email protected]> Signed-off-by: Mat Martineau <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2021-06-22perf script: Share addr_al between functionsAdrian Hunter1-14/+24
Share the addr_location of 'addr' so that it need not be resolved more than once. Signed-off-by: Adrian Hunter <[email protected]> Cc: Andi Kleen <[email protected]> Cc: Jiri Olsa <[email protected]> Cc: Kan Liang <[email protected]> Cc: Leo Yan <[email protected]> Cc: Mark Rutland <[email protected]> Cc: Namhyung Kim <[email protected]> Cc: Peter Zijlstra <[email protected]> Link: http://lore.kernel.org/lkml/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2021-06-22perf script: Move filtering before scriptingAdrian Hunter1-6/+6
To make it possible to use filtering with scripts, move filtering before scripting. Signed-off-by: Adrian Hunter <[email protected]> Cc: Andi Kleen <[email protected]> Cc: Jiri Olsa <[email protected]> Cc: Kan Liang <[email protected]> Cc: Leo Yan <[email protected]> Cc: Mark Rutland <[email protected]> Cc: Namhyung Kim <[email protected]> Cc: Peter Zijlstra <[email protected]> Link: http://lore.kernel.org/lkml/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2021-06-22perf script: Move filter_cpu() earlierAdrian Hunter1-3/+3
Generally, it should be more efficient if filter_cpu() comes before machine__resolve() because filter_cpu() is much less code than machine__resolve(). Example: $ perf record --sample-cpu -- make -C tools/perf >/dev/null Before: $ perf stat -- perf script -C 0 >/dev/null Performance counter stats for 'perf script -C 0': 116.94 msec task-clock # 0.992 CPUs utilized 2 context-switches # 17.103 /sec 0 cpu-migrations # 0.000 /sec 8,187 page-faults # 70.011 K/sec 478,351,812 cycles # 4.091 GHz 564,785,464 instructions # 1.18 insn per cycle 114,341,105 branches # 977.789 M/sec 2,615,495 branch-misses # 2.29% of all branches 0.117840576 seconds time elapsed 0.085040000 seconds user 0.032396000 seconds sys After: $ perf stat -- perf script -C 0 >/dev/null Performance counter stats for 'perf script -C 0': 107.45 msec task-clock # 0.992 CPUs utilized 3 context-switches # 27.919 /sec 0 cpu-migrations # 0.000 /sec 7,964 page-faults # 74.117 K/sec 438,417,260 cycles # 4.080 GHz 522,571,855 instructions # 1.19 insn per cycle 105,187,488 branches # 978.921 M/sec 2,356,261 branch-misses # 2.24% of all branches 0.108282546 seconds time elapsed 0.095935000 seconds user 0.011991000 seconds sys Signed-off-by: Adrian Hunter <[email protected]> Cc: Andi Kleen <[email protected]> Cc: Jiri Olsa <[email protected]> Cc: Kan Liang <[email protected]> Cc: Leo Yan <[email protected]> Cc: Mark Rutland <[email protected]> Cc: Namhyung Kim <[email protected]> Cc: Peter Zijlstra <[email protected]> Link: http://lore.kernel.org/lkml/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2021-06-22tc-testing: add test for ct DNAT tuple collisionMarcelo Ricardo Leitner1-0/+45
When this test fails, /proc/net/nf_conntrack gets only 1 entry: ipv4 2 tcp 6 119 SYN_SENT src=10.0.0.10 dst=10.0.0.10 sport=5000 dport=10 [UNREPLIED] src=20.0.0.1 dst=10.0.0.10 sport=10 dport=5000 mark=0 secctx=system_u:object_r:unlabeled_t:s0 zone=0 use=2 When it works, it gets 2 entries: ipv4 2 tcp 6 119 SYN_SENT src=10.0.0.10 dst=10.0.0.20 sport=5000 dport=10 [UNREPLIED] src=20.0.0.1 dst=10.0.0.10 sport=10 dport=58203 mark=0 secctx=system_u:object_r:unlabeled_t:s0 zone=0 use=2 ipv4 2 tcp 6 119 SYN_SENT src=10.0.0.10 dst=10.0.0.10 sport=5000 dport=10 [UNREPLIED] src=20.0.0.1 dst=10.0.0.10 sport=10 dport=5000 mark=0 secctx=system_u:object_r:unlabeled_t:s0 zone=0 use=2 The missing entry is because the 2nd packet hits a tuple collusion and the conntrack entry doesn't get allocated. Signed-off-by: Marcelo Ricardo Leitner <[email protected]> Signed-off-by: David S. Miller <[email protected]>
Powered by cgit, Gruvboxed by Blaster4385.