| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
When accumulating callchain entry, also save current snapshot of the
chain so that it can show the rest of the chain.
Signed-off-by: Namhyung Kim <[email protected]>
Tested-by: Arun Sharma <[email protected]>
Tested-by: Rodrigo Campos <[email protected]>
Cc: Frederic Weisbecker <[email protected]>
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Jiri Olsa <[email protected]>
|
|
The callchain_cursor_snapshot() is for saving current status of the
callchain. It'll be used to accumulate callchain information for each node.
Signed-off-by: Namhyung Kim <[email protected]>
Tested-by: Arun Sharma <[email protected]>
Tested-by: Rodrigo Campos <[email protected]>
Cc: Frederic Weisbecker <[email protected]>
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Jiri Olsa <[email protected]>
|
|
It is possble that a callchain has cycles or recursive calls. In that
case it'll end up having entries more than 100% overhead in the
output. In order to prevent such entries, cache each callchain node
and skip if same entry already cumulated.
Signed-off-by: Namhyung Kim <[email protected]>
Tested-by: Arun Sharma <[email protected]>
Tested-by: Rodrigo Campos <[email protected]>
Cc: Frederic Weisbecker <[email protected]>
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Jiri Olsa <[email protected]>
|
|
The cpumode and level in struct addr_localtion was set for a sample
and but updated as cumulative callchains were added. This led to have
non-matching symbol and cpumode in the output.
Update it accordingly based on the fact whether the map is a part of
the kernel or not. This is a reverse of what thread__find_addr_map()
does.
Signed-off-by: Namhyung Kim <[email protected]>
Tested-by: Arun Sharma <[email protected]>
Tested-by: Rodrigo Campos <[email protected]>
Cc: Frederic Weisbecker <[email protected]>
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Jiri Olsa <[email protected]>
|
|
Call __hists__add_entry() for each callchain node to get an
accumulated stat for an entry. Introduce new cumulative_iter ops to
process them properly.
Signed-off-by: Namhyung Kim <[email protected]>
Tested-by: Arun Sharma <[email protected]>
Tested-by: Rodrigo Campos <[email protected]>
Cc: Frederic Weisbecker <[email protected]>
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Jiri Olsa <[email protected]>
|
|
To support callchain accumulation, @entry should be recognized if it's
accumulated or not when add_hist_entry() called. The period of an
accumulated entry should be added to ->stat_acc but not ->stat. Add
@sample_self arg for that.
Signed-off-by: Namhyung Kim <[email protected]>
Tested-by: Arun Sharma <[email protected]>
Tested-by: Rodrigo Campos <[email protected]>
Cc: Frederic Weisbecker <[email protected]>
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Jiri Olsa <[email protected]>
|
|
Maintain accumulated stat information in hist_entry->stat_acc if
symbol_conf.cumulate_callchain is set. Fields in ->stat_acc have same
vaules initially, and will be updated as callchain is processed later.
Signed-off-by: Namhyung Kim <[email protected]>
Tested-by: Arun Sharma <[email protected]>
Tested-by: Rodrigo Campos <[email protected]>
Cc: Frederic Weisbecker <[email protected]>
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Jiri Olsa <[email protected]>
|
|
There're some duplicate code when adding hist entries. They are
different in that some have branch info or mem info but generally do
same thing. So introduce new struct hist_entry_iter and add callbacks
to customize each case in general way.
The new perf_evsel__add_entry() function will look like:
iter->prepare_entry();
iter->add_single_entry();
while (iter->next_entry())
iter->add_next_entry();
iter->finish_entry();
This will help further work like the cumulative callchain patchset.
Signed-off-by: Namhyung Kim <[email protected]>
Tested-by: Arun Sharma <[email protected]>
Tested-by: Rodrigo Campos <[email protected]>
Cc: David Ahern <[email protected]>
Cc: Frederic Weisbecker <[email protected]>
Cc: Stephane Eranian <[email protected]>
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Jiri Olsa <[email protected]>
|
|
There're some duplicate code for counting number of samples. Add
hists__inc_nr_samples() and reuse it.
Suggested-by: Jiri Olsa <[email protected]>
Signed-off-by: Namhyung Kim <[email protected]>
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Jiri Olsa <[email protected]>
|
|
In "-n" mode, reserved tables (RSDP/RSDT/XSDT/DSDT/FACS) are dumped
multiple times due a missing instance check in osl_get_bios_table().
This patch fixes this issue.
Signed-off-by: Lv Zheng <[email protected]>
Signed-off-by: Rafael J. Wysocki <[email protected]>
|
|
Conflicts:
drivers/net/bonding/bond_alb.c
drivers/net/ethernet/altera/altera_msgdma.c
drivers/net/ethernet/altera/altera_sgdma.c
net/ipv6/xfrm6_output.c
Several cases of overlapping changes.
The xfrm6_output.c has a bug fix which overlaps the renaming
of skb->local_df to skb->ignore_df.
In the Altera TSE driver cases, the register access cleanups
in net-next overlapped with bug fixes done in net.
Similarly a bug fix to send ALB packets in the bonding driver using
the right source address overlaps with cleanups in net-next.
Signed-off-by: David S. Miller <[email protected]>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/balbi/usb into usb-next
Felipe writes:
usb: patches for v3.16 merge window
Not a lot here during this merge window. Mostly we just have
the usual miscellaneous patches (removal of unnecessary prints,
proper dependencies being added to Kconfig, build warning fixes,
new device ID, etc.
Other than those, the only important new features are the
new support for OS Strings which should help Linux Gadget
Drivers behave better under MS Windows. Also Babble Recovery
implementation for MUSB on AM335x. Lastly, we also have
ARCH_QCOM PHY support though phy-msm.
Signed-of-by: Felipe Balbi <[email protected]>
Conflicts:
drivers/usb/phy/phy-mv-u3d-usb.c
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu into core/rcu
Pull RCU updates from Paul E. McKenney:
" 1. Update RCU documentation. These were posted to LKML at
https://lkml.org/lkml/2014/4/28/634.
2. Miscellaneous fixes. These were posted to LKML at
https://lkml.org/lkml/2014/4/28/645.
3. Torture-test changes. These were posted to LKML at
https://lkml.org/lkml/2014/4/28/667.
4. Variable-name renaming cleanup, sent separately due to conflicts.
This was posted to LKML at https://lkml.org/lkml/2014/5/13/854.
5. Patch to suppress RCU stall warnings while sysrq requests are
being processed. This patch is the RCU portions of the patch
that Rik posted to LKML at https://lkml.org/lkml/2014/4/29/457.
The reason for pushing this patch ahead instead of waiting until
3.17 is that the NMI-based stack traces are messing up sysrq
output, and in some cases also messing up the system as well."
Signed-off-by: Ingo Molnar <[email protected]>
|
|
This patch automatically adjusts the path of MMAP records
associated with Android system libraries.
The Android system is organized with system libraries found in
/system/lib and user libraries in /data/app-lib. On the host system
(not running Android), system libraries can be found in the downloaded
NDK directory under ${NDK_ROOT}/platforms/${APP_PLATFORM}/arch-${ARCH}/usr/lib
and the user libraries are installed under libs/${APP_ABI} within
the apk build directory. This patch makes running the reporting
tools possible on the host system using the libraries from the NDK.
Signed-off-by: Michael Lentine <[email protected]>
Reviewed-by: Stephane Eranian <[email protected]>
Link: http://lkml.kernel.org/r/[email protected]
[ fixed 'space required before the open parenthesis' checkpatch.pl errors ]
Signed-off-by: Jiri Olsa <[email protected]>
|
|
This patch adds a fallback to cat for the pager. This is useful
on environments, such as Android, where less does not exist.
It is better to default to cat than to abort.
Signed-off-by: Michael Lentine <[email protected]>
Reviewed-by: Stephane Eranian <[email protected]>
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Jiri Olsa <[email protected]>
|
|
With new output fields option, its internal implementation was changed
so add a new testcase to verify whether it breaks things.
Signed-off-by: Namhyung Kim <[email protected]>
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Jiri Olsa <[email protected]>
|
|
Those print helper functions can be reused by later hist test cases so
factor them out to a common location.
Signed-off-by: Namhyung Kim <[email protected]>
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Jiri Olsa <[email protected]>
|
|
The reset_output_field() function is for clearing output field
settings and will be used for test code in later patch.
Signed-off-by: Namhyung Kim <[email protected]>
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Jiri Olsa <[email protected]>
|
|
Now we moved to the perf_hpp_[_sort]_list so no need to keep the old
hist_entry__sort_list and sort__first_dimension. Also the
hist_entry__sort_snprintf() can be gone as hist_entry__snprintf()
provides the functionality.
Signed-off-by: Namhyung Kim <[email protected]>
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Jiri Olsa <[email protected]>
|
|
Some fields missed to set default column length so it broke align in
--stdio output. Add perf_hpp__reset_width() to set it to a sane
default value.
Note that this change will ignore -w/--column-widths option for now.
Before:
$ perf report -F cpu,comm,overhead --stdio
...
# CPU Command Overhead
# ............... ........
#
0 firefox 2.65%
0 kworker/0:0 1.45%
0 swapper 5.52%
0 synergys 0.92%
1 firefox 4.54%
After:
# CPU Command Overhead
# ... ............... ........
#
0 firefox 2.65%
0 kworker/0:0 1.45%
0 swapper 5.52%
0 synergys 0.92%
1 firefox 4.54%
Signed-off-by: Namhyung Kim <[email protected]>
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Jiri Olsa <[email protected]>
|
|
When it converted sort entries to hpp formats, it missed se->elide
handling, so add it for compatibility.
Signed-off-by: Namhyung Kim <[email protected]>
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Jiri Olsa <[email protected]>
|
|
The --fields option is to allow user setup output field in any order.
It can receive any sort keys and following (hpp) fields:
overhead, overhead_sys, overhead_us, sample and period
If guest profiling is enabled, overhead_guest_{sys,us} will be
available too.
More more information, please see previous patch "perf report:
Add -F option to specify output fields"
Signed-off-by: Namhyung Kim <[email protected]>
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Jiri Olsa <[email protected]>
|
|
The hists__filter_entries() function is called when down arrow key is
pressed for navigating through the entries in TUI. It has a check for
filtering out entries that have very small overhead (under min_pcnt).
However it just assumed the entries are sorted by the overhead so when
it saw such a small overheaded entry, it just stopped navigating as an
optimization. But it's not true anymore due to new --fields and
--sort optoin behavior and this case users cannot go down to a next
entry if ther's an entry with small overhead in-between.
Signed-off-by: Namhyung Kim <[email protected]>
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Jiri Olsa <[email protected]>
|
|
Currently, what the sort_entry does is just identifying hist entries
so that they can be grouped properly. However, with -F option
support, it indeed needs to sort entries appropriately to be shown to
users. So add ->sort() member to do it.
Signed-off-by: Namhyung Kim <[email protected]>
Acked-by: Ingo Molnar <[email protected]>
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Jiri Olsa <[email protected]>
|
|
The -F/--fields option is to allow user setup output field in any
order. It can receive any sort keys and following (hpp) fields:
overhead, overhead_sys, overhead_us, sample and period
If guest profiling is enabled, overhead_guest_{sys,us} will be
available too.
The output fields also affect sort order unless you give -s/--sort
option. And any keys specified on -s option, will also be added to
the output field list automatically.
$ perf report -F sym,sample,overhead
...
# Symbol Samples Overhead
# .......................... ............ ........
#
[.] __cxa_atexit 2 2.50%
[.] __libc_csu_init 4 5.00%
[.] __new_exitfn 3 3.75%
[.] _dl_check_map_versions 1 1.25%
[.] _dl_name_match_p 4 5.00%
[.] _dl_setup_hash 1 1.25%
[.] _dl_sysdep_start 1 1.25%
[.] _init 5 6.25%
[.] _setjmp 6 7.50%
[.] a 8 10.00%
[.] b 8 10.00%
[.] brk 1 1.25%
[.] c 8 10.00%
Note that, the example output above is captured after applying next
patch which fixes sort/comparing behavior.
Requested-by: Ingo Molnar <[email protected]>
Signed-off-by: Namhyung Kim <[email protected]>
Acked-by: Ingo Molnar <[email protected]>
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Jiri Olsa <[email protected]>
|
|
So that it can be set properly prior to set up output fields. That
makes easy to handle/warn errors during the setup since it doesn't
need to be bothered with the GUI.
Signed-off-by: Namhyung Kim <[email protected]>
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Jiri Olsa <[email protected]>
|
|
The perf uses different default sort orders for different use-cases,
and this was scattered throughout the code. Add get_default_sort_
order() function to handle this and change initial value of sort_order
to NULL to distinguish it from user-given one.
Signed-off-by: Namhyung Kim <[email protected]>
Cc: Stephane Eranian <[email protected]>
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Jiri Olsa <[email protected]>
|
|
Add overhead{,_sys,_us,_guest_sys,_guest_us}, sample and period sort
keys so that they can be selected with --sort/-s option.
$ perf report -s period,comm --stdio
...
# Overhead Period Command
# ........ ............ ...............
#
47.06% 152 swapper
13.93% 45 qemu-system-arm
12.38% 40 synergys
3.72% 12 firefox
2.48% 8 xchat
Signed-off-by: Namhyung Kim <[email protected]>
Acked-by: Ingo Molnar <[email protected]>
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Jiri Olsa <[email protected]>
|
|
The callback was used by TUI for determining color of folded sign
using percent of first field/column. But it cannot be used anymore
since it now support dynamic reordering of output field.
So move the logic to the hist_browser__show_entry().
Signed-off-by: Namhyung Kim <[email protected]>
Acked-by: Ingo Molnar <[email protected]>
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Jiri Olsa <[email protected]>
|
|
Until now the hpp and sort functions do similar jobs different ways.
Since the sort functions converted/wrapped to hpp formats it can do
the job in a uniform way.
The perf_hpp__sort_list has a list of hpp formats to sort entries and
the perf_hpp__list has a list of hpp formats to print output result.
To have a backward compatibility, it automatically adds 'overhead'
field in front of sort list. And then all of fields in sort list
added to the output list (if it's not already there).
Signed-off-by: Namhyung Kim <[email protected]>
Acked-by: Ingo Molnar <[email protected]>
Link: http://lkml.kernel.org/n/[email protected]
Signed-off-by: Jiri Olsa <[email protected]>
|
|
Convert output sorting function to use ->sort hpp functions.
Signed-off-by: Namhyung Kim <[email protected]>
Acked-by: Ingo Molnar <[email protected]>
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Jiri Olsa <[email protected]>
|
|
Move logic of hist_entry__sort_on_period to __hpp__sort() in order to
support event group report.
Signed-off-by: Namhyung Kim <[email protected]>
Acked-by: Ingo Molnar <[email protected]>
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Jiri Olsa <[email protected]>
|
|
It wrapped sort entries to hpp functions, so using the hpp sort list
to sort entries.
Signed-off-by: Namhyung Kim <[email protected]>
Acked-by: Ingo Molnar <[email protected]>
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Jiri Olsa <[email protected]>
|
|
This is a preparation of consolidating management of output field and
sort keys.
Signed-off-by: Namhyung Kim <[email protected]>
Acked-by: Ingo Molnar <[email protected]>
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Jiri Olsa <[email protected]>
|
|
Those function pointers will be used to sort report output based on
the selected fields. This is a preparation of later change.
Signed-off-by: Namhyung Kim <[email protected]>
Acked-by: Ingo Molnar <[email protected]>
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Jiri Olsa <[email protected]>
|
|
These kernel interfaces got removed by:
commit 8e7fbcbc22c12414bcc9dfdd683637f58fb32759
Author: Peter Zijlstra <[email protected]>
Date: Mon Jan 9 11:28:35 2012 +0100
sched: Remove stale power aware scheduling remnants and dysfunctional knobs
No need to further keep them as userspace configurations.
Signed-off-by: Thomas Renninger <[email protected]>
Signed-off-by: Rafael J. Wysocki <[email protected]>
|
|
Signed-off-by: Thomas Renninger <[email protected]>
Signed-off-by: Rafael J. Wysocki <[email protected]>
|
|
available
Signed-off-by: Thomas Renninger <[email protected]>
Signed-off-by: Rafael J. Wysocki <[email protected]>
|
|
Signed-off-by: Thomas Renninger <[email protected]>
Signed-off-by: Rafael J. Wysocki <[email protected]>
|
|
Signed-off-by: Thomas Renninger <[email protected]>
Signed-off-by: Rafael J. Wysocki <[email protected]>
|
|
Signed-off-by: Ramkumar Ramachandra <[email protected]>
Signed-off-by: Thomas Renninger <[email protected]>
Signed-off-by: Rafael J. Wysocki <[email protected]>
|
|
Signed-off-by: Ramkumar Ramachandra <[email protected]>
Signed-off-by: Thomas Renninger <[email protected]>
Signed-off-by: Rafael J. Wysocki <[email protected]>
|
|
Signed-off-by: Ramkumar Ramachandra <[email protected]>
Signed-off-by: Thomas Renninger <[email protected]>
Signed-off-by: Rafael J. Wysocki <[email protected]>
|
|
JITed seccomp filters can be quite large if they check a lot of syscalls
Simply increase buffer size
Signed-off-by: Alexei Starovoitov <[email protected]>
Acked-by: Daniel Borkmann <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
seccomp filters use kernel JIT image addresses, so bpf_jit_enable=2 prints
[ 20.146438] flen=3 proglen=82 pass=0 image=0000000000000000
[ 20.146442] JIT code: 00000000: 55 48 89 e5 48 81 ec 28 02 00 00 ...
ignore image address, so that seccomp filters can be disassembled
Signed-off-by: Alexei Starovoitov <[email protected]>
Acked-by: Daniel Borkmann <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
Adding libdw DWARF post unwind support, which is part
of elfutils-devel/libdw-dev package from version 0.158.
The new code is contained in unwin-libdw.c object, and
implements unwind__get_entries unwind interface function.
Signed-off-by: Jean Pihet <[email protected]>
Reviewed-by: Will Deacon <[email protected]>
Cc: Arnaldo Carvalho de Melo <[email protected]>
Cc: Corey Ashford <[email protected]>
Cc: David Ahern <[email protected]>
Cc: Frederic Weisbecker <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Paul Mackerras <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Jiri Olsa <[email protected]>
|
|
Adding dwarf unwind test, that setups live machine data over
the perf test thread and does the remote unwind.
Need to use -fno-optimize-sibling-calls for test compilation,
otherwise 'krava_*' function calls are optimized into jumps
and omitted from the stack unwind.
So far it was enabled only for x86.
Signed-off-by: Jean Pihet <[email protected]>
Reviewed-by: Will Deacon <[email protected]>
Cc: Arnaldo Carvalho de Melo <[email protected]>
Cc: Corey Ashford <[email protected]>
Cc: David Ahern <[email protected]>
Cc: Frederic Weisbecker <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Paul Mackerras <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Jiri Olsa <[email protected]>
|
|
Introducing perf_regs_load function, which is going
to be used for dwarf unwind test in following patches.
It takes single argument as a pointer to the regs dump
buffer and populates it with current registers values.
Signed-off-by: Jean Pihet <[email protected]>
Reviewed-by: Will Deacon <[email protected]>
Cc: Arnaldo Carvalho de Melo <[email protected]>
Cc: Corey Ashford <[email protected]>
Cc: David Ahern <[email protected]>
Cc: Frederic Weisbecker <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Paul Mackerras <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Jiri Olsa <[email protected]>
|
|
Prevents a build breakage since commit d944c4eebcf4c0d5e5d9728fec110cbf0047ad7f
'tools: Consolidate types.h'
Signed-off-by: Jean Pihet <[email protected]>
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Jiri Olsa <[email protected]>
|
|
cppcheck detected following warning:
[tools/perf/util/session.c:1628] -> [tools/perf/util/session.c:1632]:
(warning) Possible null pointer dereference: session - otherwise it
is redundant to check it against null.
In order to avoide null pointer, check the pointer before use.
Signed-off-by: Masanari Iida <[email protected]>
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Jiri Olsa <[email protected]>
|