aboutsummaryrefslogtreecommitdiff
path: root/tools
AgeCommit message (Collapse)AuthorFilesLines
2023-09-11selftests/bpf: Offloaded prog after non-offloaded should not cause BUGEduard Zingerman1-0/+61
Check what happens if non-offloaded dev bound BPF program is followed by offloaded dev bound program. Test case adapated from syzbot report [1]. [1] https://lore.kernel.org/bpf/[email protected]/ Signed-off-by: Eduard Zingerman <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Martin KaFai Lau <[email protected]>
2023-09-12objtool: Fix _THIS_IP_ detection for cold functionsJosh Poimboeuf1-1/+2
Cold functions and their non-cold counterparts can use _THIS_IP_ to reference each other. Don't warn about !ENDBR in that case. Note that for GCC this is currently irrelevant in light of the following commit c27cd083cfb9 ("Compiler attributes: GCC cold function alignment workarounds") which disabled cold functions in the kernel. However this may still be possible with Clang. Fixes several warnings like the following: drivers/scsi/bnx2i/bnx2i.prelink.o: warning: objtool: bnx2i_hw_ep_disconnect+0x19d: relocation to !ENDBR: bnx2i_hw_ep_disconnect.cold+0x0 drivers/net/ipvlan/ipvlan.prelink.o: warning: objtool: ipvlan_addr4_event.cold+0x28: relocation to !ENDBR: ipvlan_addr4_event+0xda drivers/net/ipvlan/ipvlan.prelink.o: warning: objtool: ipvlan_addr6_event.cold+0x26: relocation to !ENDBR: ipvlan_addr6_event+0xb7 drivers/net/ethernet/broadcom/tg3.prelink.o: warning: objtool: tg3_set_ringparam.cold+0x17: relocation to !ENDBR: tg3_set_ringparam+0x115 drivers/net/ethernet/broadcom/tg3.prelink.o: warning: objtool: tg3_self_test.cold+0x17: relocation to !ENDBR: tg3_self_test+0x2e1 drivers/target/iscsi/cxgbit/cxgbit.prelink.o: warning: objtool: __cxgbit_free_conn.cold+0x24: relocation to !ENDBR: __cxgbit_free_conn+0xfb net/can/can.prelink.o: warning: objtool: can_rx_unregister.cold+0x2c: relocation to !ENDBR: can_rx_unregister+0x11b drivers/net/ethernet/qlogic/qed/qed.prelink.o: warning: objtool: qed_spq_post+0xc0: relocation to !ENDBR: qed_spq_post.cold+0x9a drivers/net/ethernet/qlogic/qed/qed.prelink.o: warning: objtool: qed_iwarp_ll2_comp_syn_pkt.cold+0x12f: relocation to !ENDBR: qed_iwarp_ll2_comp_syn_pkt+0x34b net/tipc/tipc.prelink.o: warning: objtool: tipc_nametbl_publish.cold+0x21: relocation to !ENDBR: tipc_nametbl_publish+0xa6 Signed-off-by: Josh Poimboeuf <[email protected]> Signed-off-by: Ingo Molnar <[email protected]> Link: https://lore.kernel.org/r/d8f1ab6a23a6105bc023c132b105f245c7976be6.1694476559.git.jpoimboe@kernel.org
2023-09-11selftests: user_events: create test-specific Kconfig fragmentsNaresh Kamboju1-0/+1
Create the config file in user_events directory of testcase which need more kernel configuration than the default defconfig. User could use these configs with merge_config.sh script: The Kconfig CONFIG_USER_EVENTS=y is needed for the test to read data from the following files, - "/sys/kernel/tracing/user_events_data" - "/sys/kernel/tracing/user_events_status" - "/sys/kernel/tracing/events/user_events/*" Enable config for specific testcase: (export ARCH=xxx #for cross compiling) ./scripts/kconfig/merge_config.sh .config \ tools/testing/selftests/user_events/config Enable configs for all testcases: (export ARCH=xxx #for cross compiling) ./scripts/kconfig/merge_config.sh .config \ tools/testing/selftests/*/config Cc: Beau Belgrave <[email protected]> Cc: Shuah Khan <[email protected]> Cc: [email protected] Signed-off-by: Naresh Kamboju <[email protected]> Signed-off-by: Shuah Khan <[email protected]>
2023-09-11ftrace/selftests: Add softlink to latest log directorySteven Rostedt (Google)1-1/+9
When I'm debugging something with the ftrace selftests and need to look at the logs, it becomes tedious that I need to do the following: ls -ltr logs [ copy the last directory ] ls logs/<paste-last-dir> to see where the logs are. Instead, do the common practice of having a "latest" softlink to the last run selftest. This way after running the selftest I only need to do: ls logs/latest/ and it will always give me the directory of the last run selftest logs! Signed-off-by: Steven Rostedt (Google) <[email protected]> Acked-by: Masami Hiramatsu (Google) <[email protected]> Signed-off-by: Shuah Khan <[email protected]>
2023-09-11selftests/user_events: Fix failures when user_events is not installedBeau Belgrave5-0/+111
When user_events is not installed the self tests currently fail. Now that these self tests run by default we need to ensure they don't fail when user_events was not enabled for the kernel being tested. Add common methods to detect if tracefs and user_events is enabled. If either is not enabled skip the test. If tracefs is enabled, but is not mounted, mount tracefs and fail if there were any errors. Fail if not run as root. Fixes: 68b4d2d58389 ("selftests/user_events: Reenable build") Reported-by: Naresh Kamboju <[email protected]> Link: https://lore.kernel.org/all/CA+G9fYuugZ0OMeS6HvpSS4nuf_A3s455ecipGBvER0LJHojKZg@mail.gmail.com/ Signed-off-by: Beau Belgrave <[email protected]> Signed-off-by: Shuah Khan <[email protected]>
2023-09-11selftests/bpf: Correct map_fd to data_fd in tailcallsLeon Hwang1-16/+16
Get and check data_fd. It should not check map_fd again. Meanwhile, correct some 'return' to 'goto out'. Thank the suggestion from Maciej in "bpf, x64: Fix tailcall infinite loop"[0] discussions. [0] https://lore.kernel.org/bpf/[email protected]/T/#m7d3b601066ba66400d436b7e7579b2df4a101033 Fixes: 79d49ba048ec ("bpf, testing: Add various tail call test cases") Fixes: 3b0379111197 ("selftests/bpf: Add tailcall_bpf2bpf tests") Fixes: 5e0b0a4c52d3 ("selftests/bpf: Test tail call counting with bpf2bpf and data on stack") Signed-off-by: Leon Hwang <[email protected]> Reviewed-by: Maciej Fijalkowski <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Martin KaFai Lau <[email protected]>
2023-09-11selftests/bpf: Update bpf_clone_redirect expected return codeStanislav Fomichev1-2/+10
Commit 151e887d8ff9 ("veth: Fixing transmit return status for dropped packets") started propagating proper NET_XMIT_DROP error to the caller which means it's now possible to get positive error code when calling bpf_clone_redirect() in this particular test. Update the test to reflect that. Reported-by: Daniel Borkmann <[email protected]> Signed-off-by: Stanislav Fomichev <[email protected]> Signed-off-by: Daniel Borkmann <[email protected]> Link: https://lore.kernel.org/bpf/[email protected]
2023-09-11bpf: Clarify error expectations from bpf_clone_redirectStanislav Fomichev1-1/+3
Commit 151e887d8ff9 ("veth: Fixing transmit return status for dropped packets") exposed the fact that bpf_clone_redirect is capable of returning raw NET_XMIT_XXX return codes. This is in the conflict with its UAPI doc which says the following: "0 on success, or a negative error in case of failure." Update the UAPI to reflect the fact that bpf_clone_redirect can return positive error numbers, but don't explicitly define their meaning. Reported-by: Daniel Borkmann <[email protected]> Signed-off-by: Stanislav Fomichev <[email protected]> Signed-off-by: Daniel Borkmann <[email protected]> Link: https://lore.kernel.org/bpf/[email protected]
2023-09-11selftests/bpf: Test all valid alloc sizes for bpf mem allocatorHou Tao2-0/+173
Add a test to test all possible and valid allocation size for bpf memory allocator. For each possible allocation size, the test uses the following two steps to test the alloc and free path: 1) allocate N (N > high_watermark) objects to trigger the refill executed in irq_work. 2) free N objects to trigger the freeing executed in irq_work. Signed-off-by: Hou Tao <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Alexei Starovoitov <[email protected]>
2023-09-11perf tools: Update copy of libbpf's hashmap.cArnaldo Carvalho de Melo1-10/+0
To pick the changes in: a3e7e6b17946f48b ("libbpf: Remove HASHMAP_INIT static initialization helper") That don't entail any changes in tools/perf. This addresses this perf build warning: Warning: Kernel ABI header differences: diff -u tools/perf/util/hashmap.h tools/lib/bpf/hashmap.h Not a kernel ABI, its just that this uses the mechanism in place for checking kernel ABI files drift. Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2023-09-11perf vendor events intel: Fix spelling mistakesIan Rogers24-91/+91
Update perf JSON files with spelling fixes by Colin Ian King <[email protected]> contributed in: https://github.com/intel/perfmon/pull/96 "Fix various spelling mistakes and typos as found using codespell #96" This is added on top of the spelling mistakes and release number updates in: https://github.com/intel/perfmon/pull/98 "EMR, SPR, CLX, SKX, BDX, HSX, BDW-DE, WSM-EP*, NHM-*, JKT, IVT : Release event updates" Some additional spelling fixes reported by Edward Baker <[email protected]> are added on top of this. Signed-off-by: Ian Rogers <[email protected]> Cc: Adrian Hunter <[email protected]> Cc: Alexander Shishkin <[email protected]> Cc: Alexandre Torgue <[email protected]> Cc: Colin Ian King <[email protected]> Cc: Edward Baker <[email protected]> Cc: Ingo Molnar <[email protected]> Cc: Jiri Olsa <[email protected]> Cc: Kan Liang <[email protected]> Cc: Mark Rutland <[email protected]> Cc: Maxime Coquelin <[email protected]> Cc: Namhyung Kim <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: Xing Zhengjun <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2023-09-11perf vendor events intel: Add emeraldrapids, update sapphirerapids to v1.16Ian Rogers16-17/+23006
Add emeraldrapids events that were added at intel's perfmon site in: https://github.com/intel/perfmon/pull/98 "EMR, SPR, CLX, SKX, BDX, HSX, BDW-DE, WSM-EP*, NHM-*, JKT, IVT : Release event updates" "Emerald Rapids (0xCF) was previously pointing to SPR core. In this pull request dedicated EMR files are introduced." Signed-off-by: Ian Rogers <[email protected]> Cc: Adrian Hunter <[email protected]> Cc: Alexander Shishkin <[email protected]> Cc: Alexandre Torgue <[email protected]> Cc: Colin Ian King <[email protected]> Cc: Edward Baker <[email protected]> Cc: Ingo Molnar <[email protected]> Cc: Jiri Olsa <[email protected]> Cc: Kan Liang <[email protected]> Cc: Mark Rutland <[email protected]> Cc: Maxime Coquelin <[email protected]> Cc: Namhyung Kim <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: Xing Zhengjun <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2023-09-11perf vendor events intel: Add lunarlake v1.0Ian Rogers7-0/+765
Add lunarlake events that were added at intel's perfmon site in: https://github.com/intel/perfmon/pull/97 "LNL: Release initial events" Reviewed-by: Kan Liang <[email protected]> Signed-off-by: Ian Rogers <[email protected]> Cc: Adrian Hunter <[email protected]> Cc: Alexander Shishkin <[email protected]> Cc: Alexandre Torgue <[email protected]> Cc: Colin Ian King <[email protected]> Cc: Edward Baker <[email protected]> Cc: Ingo Molnar <[email protected]> Cc: Jiri Olsa <[email protected]> Cc: Mark Rutland <[email protected]> Cc: Maxime Coquelin <[email protected]> Cc: Namhyung Kim <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: Xing Zhengjun <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2023-09-11perf parse-events: Introduce 'struct parse_events_terms'Ian Rogers8-144/+160
parse_events_terms() existed in function names but was passed a 'struct list_head'. As many parse_events functions take an evsel_config list as well as a parse_event_term list, and the naming head_terms and head_config is inconsistent, there's a potential to switch the lists and get errors. Introduce a 'struct parse_events_terms', that just wraps a list_head, to avoid this. Add the regular init/exit functions and transition the code to use them. Reviewed-by: James Clark <[email protected]> Signed-off-by: Ian Rogers <[email protected]> Cc: Adrian Hunter <[email protected]> Cc: Alexander Shishkin <[email protected]> Cc: Ingo Molnar <[email protected]> Cc: Jiri Olsa <[email protected]> Cc: Kan Liang <[email protected]> Cc: Mark Rutland <[email protected]> Cc: Namhyung Kim <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: Rob Herring <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2023-09-11perf parse-events: Copy fewer term listsIan Rogers3-67/+65
When trying to add events to multiple PMUs the term list is copied first as adding the event will rewrite the event's name term into the sysfs and/or json encoding terms (see perf_pmu__check_alias). Change the parse events add API so the passed in term list is const, then copy the list when modification is necessary. Reviewed-by: James Clark <[email protected]> Signed-off-by: Ian Rogers <[email protected]> Cc: Adrian Hunter <[email protected]> Cc: Alexander Shishkin <[email protected]> Cc: Ingo Molnar <[email protected]> Cc: Jiri Olsa <[email protected]> Cc: Kan Liang <[email protected]> Cc: Mark Rutland <[email protected]> Cc: Namhyung Kim <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: Rob Herring <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2023-09-11perf parse-events: Avoid enum castsIan Rogers2-15/+12
Add term_type to union of values returned by the lexer to avoid casts to and from an integer. Reviewed-by: James Clark <[email protected]> Signed-off-by: Ian Rogers <[email protected]> Cc: Adrian Hunter <[email protected]> Cc: Alexander Shishkin <[email protected]> Cc: Ingo Molnar <[email protected]> Cc: Jiri Olsa <[email protected]> Cc: Kan Liang <[email protected]> Cc: Mark Rutland <[email protected]> Cc: Namhyung Kim <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: Rob Herring <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2023-09-11perf parse-events: Tidy up str parameterIan Rogers2-7/+8
Add a const and rename str to event_name. Reviewed-by: James Clark <[email protected]> Signed-off-by: Ian Rogers <[email protected]> Cc: Adrian Hunter <[email protected]> Cc: Alexander Shishkin <[email protected]> Cc: Ingo Molnar <[email protected]> Cc: Jiri Olsa <[email protected]> Cc: Kan Liang <[email protected]> Cc: Mark Rutland <[email protected]> Cc: Namhyung Kim <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: Rob Herring <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2023-09-11perf parse-events: Remove unnecessary __maybe_unusedIan Rogers1-4/+2
The parameter head_terms is always used in get_config_terms. Reviewed-by: James Clark <[email protected]> Signed-off-by: Ian Rogers <[email protected]> Cc: Adrian Hunter <[email protected]> Cc: Alexander Shishkin <[email protected]> Cc: Ingo Molnar <[email protected]> Cc: Jiri Olsa <[email protected]> Cc: Kan Liang <[email protected]> Cc: Mark Rutland <[email protected]> Cc: Namhyung Kim <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: Rob Herring <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2023-09-11perf shell completion: Support completion of metrics/metricgroupsIan Rogers1-0/+4
Allow metrics to expand for -M or --metrics options. Committer testing: # grep -m1 'model name' /proc/cpuinfo model name : AMD Ryzen 9 5950X 16-Core Processor # Before: Just expansion of files/directories in the pwd are expanded: # . tools/perf/perf-completion.sh # perf stat -M b block/ build/ # perf stat -M b After: # . tools/perf/perf-completion.sh # perf stat -M all_l2_cache_accesses all_remote_links_outbound data_fabric l1_itlb_misses l2_cache_misses_from_l2_hwpf macro_ops_dispatched tlb all_l2_cache_hits branch_misprediction_ratio decoder l2_cache l3_cache nps1_die_to_dram all_l2_cache_misses branch_prediction ic_fetch_miss_ratio l2_cache_accesses_from_l2_hwpf l3_read_miss_latency op_cache_fetch_miss_ratio # perf stat -M branch_ branch_misprediction_ratio branch_prediction # perf stat -M branch_prediction -a sleep 1 Performance counter stats for 'system wide': 115,079,765 ex_ret_brn # 4.0 % branch_misprediction_ratio 4,561,456 ex_ret_brn_misp 1.015925106 seconds time elapsed # Suggested-by: Arnaldo Carvalho de Melo <[email protected]> Signed-off-by: Ian Rogers <[email protected]> Tested-by: Arnaldo Carvalho de Melo <[email protected]> Acked-by: Namhyung Kim <[email protected]> Cc: Adrian Hunter <[email protected]> Cc: Alexander Shishkin <[email protected]> Cc: Ingo Molnar <[email protected]> Cc: Jiri Olsa <[email protected]> Cc: Mark Rutland <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: Stephane Eranian <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2023-09-11perf completion: Support completion of libpfm4 eventsIan Rogers1-0/+4
Use `perf list --raw-dump pfm` to support completion of libpfm4 events. Committer testing: # grep -m1 'model name' /proc/cpuinfo model name : AMD Ryzen 9 5950X 16-Core Processor Before: Files in the current directory are expanded when <tab> After: Only the PFM events are: # . tools/perf/perf-completion.sh # perf stat --pfm-events <tab> Becomes: # perf stat --pfm-events perf_raw::r0000 As apparently there are no other PFM events for this Ryzen 9 5950X machine. Signed-off-by: Ian Rogers <[email protected]> Acked-by: Namhyung Kim <[email protected]> Tested-by: Arnaldo Carvalho de Melo <[email protected]> Cc: Adrian Hunter <[email protected]> Cc: Alexander Shishkin <[email protected]> Cc: Ingo Molnar <[email protected]> Cc: Jiri Olsa <[email protected]> Cc: Mark Rutland <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: Stephane Eranian <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2023-09-11perf shell completion: Restrict completion of events to eventsIan Rogers1-1/+1
'perf list' will list libpfm4 events and metrics which aren't valid options to the '-e' option. Restrict the events gathered so that invalid ones aren't shown. Before: $ perf stat -e <tab><tab> Display all 633 possibilities? (y or n) After: $ perf stat -e <tab><tab> Display all 375 possibilities? (y or n) Committer testing: # grep -m1 'model name' /proc/cpuinfo model name : AMD Ryzen 9 5950X 16-Core Processor # Before: # . tools/perf/perf-completion.sh # perf stat -e Display all 2672 possibilities? (y or n) After: # . tools/perf/perf-completion.sh # perf stat -e Display all 2648 possibilities? (y or n) Reported-by: Arnaldo Carvalho de Melo <[email protected]> Signed-off-by: Ian Rogers <[email protected]> Tested-by: Arnaldo Carvalho de Melo <[email protected]> Acked-by: Namhyung Kim <[email protected]> Cc: Adrian Hunter <[email protected]> Cc: Alexander Shishkin <[email protected]> Cc: Ingo Molnar <[email protected]> Cc: Jiri Olsa <[email protected]> Cc: Mark Rutland <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: Stephane Eranian <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2023-09-11perf stat: Fix aggr mode initializationIan Rogers1-1/+1
Generating metrics llc_code_read_mpi_demand_plus_prefetch, llc_data_read_mpi_demand_plus_prefetch, llc_miss_local_memory_bandwidth_read, llc_miss_local_memory_bandwidth_write, nllc_miss_remote_memory_bandwidth_read, memory_bandwidth_read, memory_bandwidth_write, uncore_frequency, upi_data_transmit_bw, C2_Pkg_Residency, C3_Core_Residency, C3_Pkg_Residency, C6_Core_Residency, C6_Pkg_Residency, C7_Core_Residency, C7_Pkg_Residency, UNCORE_FREQ and tma_info_system_socket_clks would trigger an address sanitizer heap-buffer-overflows on a SkylakeX. ``` ==2567752==ERROR: AddressSanitizer: heap-buffer-overflow on address 0x5020003ed098 at pc 0x5621a816654e bp 0x7fffb55d4da0 sp 0x7fffb55d4d98 READ of size 4 at 0x5020003eee78 thread T0 #0 0x558265d6654d in aggr_cpu_id__is_empty tools/perf/util/cpumap.c:694:12 #1 0x558265c914da in perf_stat__get_aggr tools/perf/builtin-stat.c:1490:6 #2 0x558265c914da in perf_stat__get_global_cached tools/perf/builtin-stat.c:1530:9 #3 0x558265e53290 in should_skip_zero_counter tools/perf/util/stat-display.c:947:31 #4 0x558265e53290 in print_counter_aggrdata tools/perf/util/stat-display.c:985:18 #5 0x558265e51931 in print_counter tools/perf/util/stat-display.c:1110:3 #6 0x558265e51931 in evlist__print_counters tools/perf/util/stat-display.c:1571:5 #7 0x558265c8ec87 in print_counters tools/perf/builtin-stat.c:981:2 #8 0x558265c8cc71 in cmd_stat tools/perf/builtin-stat.c:2837:3 #9 0x558265bb9bd4 in run_builtin tools/perf/perf.c:323:11 #10 0x558265bb98eb in handle_internal_command tools/perf/perf.c:377:8 #11 0x558265bb9389 in run_argv tools/perf/perf.c:421:2 #12 0x558265bb9389 in main tools/perf/perf.c:537:3 ``` The issue was the use of testing a cpumap with NULL rather than using empty, as a map containing the dummy value isn't NULL and the -1 results in an empty aggr map being allocated which legitimately overflows when any member is accessed. Fixes: 8a96f454f5668572 ("perf stat: Avoid SEGV if core.cpus isn't set") Signed-off-by: Ian Rogers <[email protected]> Acked-by: Namhyung Kim <[email protected]> Cc: Adrian Hunter <[email protected]> Cc: Alexander Shishkin <[email protected]> Cc: Ian Rogers <[email protected]> Cc: Ingo Molnar <[email protected]> Cc: Jiri Olsa <[email protected]> Cc: Mark Rutland <[email protected]> Cc: Peter Zijlstra <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2023-09-11perf vendor events: Update metric events for power10 platformKajol Jain1-0/+388
Update JSON/events for power10 platform with additional metrics. Signed-off-by: Kajol Jain <[email protected]> Cc: Athira Rajeev <[email protected]> Cc: Disha Goel <[email protected]> Cc: Madhavan Srinivasan <[email protected]> Cc: Namhyung Kim <[email protected]> Cc: [email protected] Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2023-09-11perf vendor events power10: Add extra data-source eventsKajol Jain1-0/+505
Update JSON/Events list with additional data-source events for power10 platform. Signed-off-by: Kajol Jain <[email protected]> Cc: Athira Rajeev <[email protected]> Cc: Disha Goel <[email protected]> Cc: Madhavan Srinivasan <[email protected]> Cc: Namhyung Kim <[email protected]> Cc: [email protected] Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2023-09-11perf vendor events power10: Update JSON/eventsKajol Jain3-15/+1282
Update JSON/Events list with data-source events for power10 platform. Signed-off-by: Kajol Jain <[email protected]> Cc: Athira Rajeev <[email protected]> Cc: Disha Goel <[email protected]> Cc: Madhavan Srinivasan <[email protected]> Cc: Namhyung Kim <[email protected]> Cc: [email protected] Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2023-09-11perf machine: Use true and false for bool variableJiapeng Chong1-3/+1
Fix the following coccicheck warnings: ./tools/perf/util/machine.c:2000:9-10: WARNING: return of 0/1 in function 'symbol__match_regex' with return type bool. Committer notes: Found this in the pile, it was already returning bool, but this patch simplifies it further, from 3 lines to just 1. Reported-by: Abaci Robot <[email protected]> Signed-off-by: Jiapeng Chong <[email protected]> Suggested-by: David Laight <[email protected]> Cc: Alexander Shishkin <[email protected]> Cc: Alexei Starovoitov <[email protected]> Cc: Andrii Nakryiko <[email protected]> Cc: Daniel Borkmann <[email protected]> Cc: Ingo Molnar <[email protected]> Cc: Jiri Olsa <[email protected]> Cc: John Fastabend <[email protected]> Cc: KP Singh <[email protected]> Cc: Mark Rutland <[email protected]> Cc: Martin KaFai Lau <[email protected]> Cc: Namhyung Kim <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: Song Liu <[email protected]> Cc: Yonghong Song <[email protected]> Cc: [email protected] Cc: [email protected] Link: https://lore.kernel.org/r/1614247483-102665-1-git-send-email-jiapeng.chong@linux.alibaba.com Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2023-09-11arch: Remove Itanium (IA-64) architectureArd Biesheuvel3-75/+0
The Itanium architecture is obsolete, and an informal survey [0] reveals that any residual use of Itanium hardware in production is mostly HP-UX or OpenVMS based. The use of Linux on Itanium appears to be limited to enthusiasts that occasionally boot a fresh Linux kernel to see whether things are still working as intended, and perhaps to churn out some distro packages that are rarely used in practice. None of the original companies behind Itanium still produce or support any hardware or software for the architecture, and it is listed as 'Orphaned' in the MAINTAINERS file, as apparently, none of the engineers that contributed on behalf of those companies (nor anyone else, for that matter) have been willing to support or maintain the architecture upstream or even be responsible for applying the odd fix. The Intel firmware team removed all IA-64 support from the Tianocore/EDK2 reference implementation of EFI in 2018. (Itanium is the original architecture for which EFI was developed, and the way Linux supports it deviates significantly from other architectures.) Some distros, such as Debian and Gentoo, still maintain [unofficial] ia64 ports, but many have dropped support years ago. While the argument is being made [1] that there is a 'for the common good' angle to being able to build and run existing projects such as the Grid Community Toolkit [2] on Itanium for interoperability testing, the fact remains that none of those projects are known to be deployed on Linux/ia64, and very few people actually have access to such a system in the first place. Even if there were ways imaginable in which Linux/ia64 could be put to good use today, what matters is whether anyone is actually doing that, and this does not appear to be the case. There are no emulators widely available, and so boot testing Itanium is generally infeasible for ordinary contributors. GCC still supports IA-64 but its compile farm [3] no longer has any IA-64 machines. GLIBC would like to get rid of IA-64 [4] too because it would permit some overdue code cleanups. In summary, the benefits to the ecosystem of having IA-64 be part of it are mostly theoretical, whereas the maintenance overhead of keeping it supported is real. So let's rip off the band aid, and remove the IA-64 arch code entirely. This follows the timeline proposed by the Debian/ia64 maintainer [5], which removes support in a controlled manner, leaving IA-64 in a known good state in the most recent LTS release. Other projects will follow once the kernel support is removed. [0] https://lore.kernel.org/all/CAMj1kXFCMh_578jniKpUtx_j8ByHnt=s7S+yQ+vGbKt9ud7+kQ@mail.gmail.com/ [1] https://lore.kernel.org/all/[email protected]/ [2] https://gridcf.org/gct-docs/latest/index.html [3] https://cfarm.tetaneutral.net/machines/list/ [4] https://lore.kernel.org/all/[email protected]/ [5] https://lore.kernel.org/all/ff58a3e76e5102c94bb5946d99187b358def688a.camel@physik.fu-berlin.de/ Acked-by: Tony Luck <[email protected]> Signed-off-by: Ard Biesheuvel <[email protected]>
2023-09-11selftests: ALSA: remove unused variablesDing Xiang4-12/+5
These variables are never referenced in the code, just remove them. Signed-off-by: Ding Xiang <[email protected]> Reviewed-by: Mark Brown <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Takashi Iwai <[email protected]>
2023-09-10selftests/net: Improve bind_bhash.sh to accommodate predictable network ↵Juntong Deng1-12/+14
interface names Starting with v197, systemd uses predictable interface network names, the traditional interface naming scheme (eth0) is deprecated, therefore it cannot be assumed that the eth0 interface exists on the host. This modification makes the bind_bhash test program run in a separate network namespace and no longer needs to consider the name of the network interface on the host. Signed-off-by: Juntong Deng <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2023-09-09Merge tag 'perf-tools-for-v6.6-1-2023-09-05' of ↵Linus Torvalds282-9119/+8004
git://git.kernel.org/pub/scm/linux/kernel/git/perf/perf-tools Pull perf tools updates from Arnaldo Carvalho de Melo: "perf tools maintainership: - Add git information for perf-tools and perf-tools-next trees and branches to the MAINTAINERS file. That is where development now takes place and myself and Namhyung Kim have write access, more people to come as we emulate other maintainer groups. perf record: - Record kernel data maps when 'perf record --data' is used, so that global variables can be resolved and used in tools that do data profiling. perf trace: - Remove the old, experimental support for BPF events in which a .c file was passed as an event: "perf trace -e hello.c" to then get compiled and loaded. The only known usage for that, that shipped with the kernel as an example for such events, augmented the raw_syscalls tracepoints and was converted to a libbpf skeleton, reusing all the user space components and the BPF code connected to the syscalls. In the end just the way to glue the BPF part and the user space type beautifiers changed, now being performed by libbpf skeletons. The next step is to use BTF to do pretty printing of all syscall types, as discussed with Alan Maguire and others. Now, on a perf built with BUILD_BPF_SKEL=1 we get most if not all path/filenames/strings, some of the networking data structures, perf_event_attr, etc, i.e. systemwide tracing of nanosleep calls and perf_event_open syscalls while 'perf stat' runs 'sleep' for 5 seconds: # perf trace -a -e *nanosleep,perf* perf stat -e cycles,instructions sleep 5 0.000 ( 9.034 ms): perf/327641 perf_event_open(attr_uptr: { type: 0 (PERF_TYPE_HARDWARE), size: 136, config: 0 (PERF_COUNT_HW_CPU_CYCLES), sample_type: IDENTIFIER, read_format: TOTAL_TIME_ENABLED|TOTAL_TIME_RUNNING, disabled: 1, inherit: 1, enable_on_exec: 1, exclude_guest: 1 }, pid: 327642 (perf), cpu: -1, group_fd: -1, flags: FD_CLOEXEC) = 3 9.039 ( 0.006 ms): perf/327641 perf_event_open(attr_uptr: { type: 0 (PERF_TYPE_HARDWARE), size: 136, config: 0x1 (PERF_COUNT_HW_INSTRUCTIONS), sample_type: IDENTIFIER, read_format: TOTAL_TIME_ENABLED|TOTAL_TIME_RUNNING, disabled: 1, inherit: 1, enable_on_exec: 1, exclude_guest: 1 }, pid: 327642 (perf-exec), cpu: -1, group_fd: -1, flags: FD_CLOEXEC) = 4 ? ( ): gpm/991 ... [continued]: clock_nanosleep()) = 0 10.133 ( ): sleep/327642 clock_nanosleep(rqtp: { .tv_sec: 5, .tv_nsec: 0 }, rmtp: 0x7ffd36f83ed0) ... ? ( ): pool-gsd-smart/3051 ... [continued]: clock_nanosleep()) = 0 30.276 ( ): gpm/991 clock_nanosleep(rqtp: { .tv_sec: 2, .tv_nsec: 0 }, rmtp: 0x7ffcc6f73710) ... 223.215 (1000.430 ms): pool-gsd-smart/3051 clock_nanosleep(rqtp: { .tv_sec: 1, .tv_nsec: 0 }, rmtp: 0x7f6e7fffec90) = 0 30.276 (2000.394 ms): gpm/991 ... [continued]: clock_nanosleep()) = 0 1230.814 ( ): pool-gsd-smart/3051 clock_nanosleep(rqtp: { .tv_sec: 1, .tv_nsec: 0 }, rmtp: 0x7f6e7fffec90) ... 1230.814 (1000.404 ms): pool-gsd-smart/3051 ... [continued]: clock_nanosleep()) = 0 2030.886 ( ): gpm/991 clock_nanosleep(rqtp: { .tv_sec: 2, .tv_nsec: 0 }, rmtp: 0x7ffcc6f73710) ... 2237.709 (1000.153 ms): pool-gsd-smart/3051 clock_nanosleep(rqtp: { .tv_sec: 1, .tv_nsec: 0 }, rmtp: 0x7f6e7fffec90) = 0 ? ( ): crond/1172 ... [continued]: clock_nanosleep()) = 0 3242.699 ( ): pool-gsd-smart/3051 clock_nanosleep(rqtp: { .tv_sec: 1, .tv_nsec: 0 }, rmtp: 0x7f6e7fffec90) ... 2030.886 (2000.385 ms): gpm/991 ... [continued]: clock_nanosleep()) = 0 3728.078 ( ): crond/1172 clock_nanosleep(rqtp: { .tv_sec: 60, .tv_nsec: 0 }, rmtp: 0x7ffe0971dcf0) ... 3242.699 (1000.158 ms): pool-gsd-smart/3051 ... [continued]: clock_nanosleep()) = 0 4031.409 ( ): gpm/991 clock_nanosleep(rqtp: { .tv_sec: 2, .tv_nsec: 0 }, rmtp: 0x7ffcc6f73710) ... 10.133 (5000.375 ms): sleep/327642 ... [continued]: clock_nanosleep()) = 0 Performance counter stats for 'sleep 5': 2,617,347 cycles 1,855,997 instructions # 0.71 insn per cycle 5.002282128 seconds time elapsed 0.000855000 seconds user 0.000852000 seconds sys perf annotate: - Building with binutils' libopcode now is opt-in (BUILD_NONDISTRO=1) for licensing reasons, and we missed a build test on tools/perf/tests makefile. Since we now default to NDEBUG=1, we ended up segfaulting when building with BUILD_NONDISTRO=1 because a needed initialization routine was being "error checked" via an assert. Fix it by explicitly checking the result and aborting instead if it fails. We better back propagate the error, but at least 'perf annotate' on samples collected for a BPF program is back working when perf is built with BUILD_NONDISTRO=1. perf report/top: - Add back TUI hierarchy mode header, that is seen when using 'perf report/top --hierarchy'. - Fix the number of entries for 'e' key in the TUI that was preventing navigation of lines when expanding an entry. perf report/script: - Support cross platform register handling, allowing a perf.data file collected on one architecture to have registers sampled correctly displayed when analysis tools such as 'perf report' and 'perf script' are used on a different architecture. - Fix handling of event attributes in pipe mode, i.e. when one uses: perf record -o - | perf report -i - When no perf.data files are used. - Handle files generated via pipe mode with a version of perf and then read also via pipe mode with a different version of perf, where the event attr record may have changed, use the record size field to properly support this version mismatch. perf probe: - Accessing global variables from uprobes isn't supported, make the error message state that instead of stating that some minimal kernel version is needed to have that feature. This seems just a tool limitation, the kernel probably has all that is needed. perf tests: - Fix a reference count related leak in the dlfilter v0 API where the result of a thread__find_symbol_fb() is not matched with an addr_location__exit() to drop the reference counts of the resolved components (machine, thread, map, symbol, etc). Add a dlfilter test to make sure that doesn't regresses. - Lots of fixes for the 'perf test' written in shell script related to problems found with the shellcheck utility. - Fixes for 'perf test' shell scripts testing features enabled when perf is built with BUILD_BPF_SKEL=1, such as 'perf stat' bpf counters. - Add perf record sample filtering test, things like the following example, that gets implemented as a BPF filter attached to the event: # perf record -e task-clock -c 10000 --filter 'ip < 0xffffffff00000000' - Improve the way the task_analyzer test checks if libtraceevent is linked, using 'perf version --build-options' instead of the more expensinve 'perf record -e "sched:sched_switch"'. - Add support for riscv in the mmap-basic test. (This went as well via the RiscV tree, same contents). libperf: - Implement riscv mmap support (This went as well via the RiscV tree, same contents). perf script: - New tool that converts perf.data files to the firefox profiler format so that one can use the visualizer at https://profiler.firefox.com/. Done by Anup Sharma as part of this year's Google Summer of Code. One can generate the output and upload it to the web interface but Anup also automated everything: perf script gecko -F 99 -a sleep 60 - Support syscall name parsing on arm64. - Print "cgroup" field on the same line as "comm". perf bench: - Add new 'uprobe' benchmark to measure the overhead of uprobes with/without BPF programs attached to it. - breakpoints are not available on power9, skip that test. perf stat: - Add #num_cpus_online literal to be used in 'perf stat' metrics, and add this extra 'perf test' check that exemplifies its purpose: TEST_ASSERT_VAL("#num_cpus_online", expr__parse(&num_cpus_online, ctx, "#num_cpus_online") == 0); TEST_ASSERT_VAL("#num_cpus", expr__parse(&num_cpus, ctx, "#num_cpus") == 0); TEST_ASSERT_VAL("#num_cpus >= #num_cpus_online", num_cpus >= num_cpus_online); Miscellaneous: - Improve tool startup time by lazily reading PMU, JSON, sysfs data. - Improve error reporting in the parsing of events, passing YYLTYPE to error routines, so that the output can show were the parsing error was found. - Add 'perf test' entries to check the parsing of events improvements. - Fix various leak for things detected by -fsanitize=address, mostly things that would be freed at tool exit, including: - Free evsel->filter on the destructor. - Allow tools to register a thread->priv destructor and use it in 'perf trace'. - Free evsel->priv in 'perf trace'. - Free string returned by synthesize_perf_probe_point() when the caller fails to do all it needs. - Adjust various compiler options to not consider errors some warnings when building with broken headers found in things like python, flex, bison, as we otherwise build with -Werror. Some for gcc, some for clang, some for some specific version of those, some for some specific version of flex or bison, or some specific combination of these components, bah. - Allow customization of clang options for BPF target, this helps building on gentoo where there are other oddities where BPF targets gets passed some compiler options intended for the native build, so building with WERROR=0 helps while these oddities are fixed. - Dont pass ERR_PTR() values to perf_session__delete() in 'perf top' and 'perf lock', fixing some segfaults when handling some odd failures. - Add LTO build option. - Fix format of unordered lists in the perf docs (tools/perf/Documentation) - Overhaul the bison files, using constructs such as YYNOMEM. - Remove unused tokens from the bison .y files. - Add more comments to various structs. - A few LoongArch enablement patches. Vendor events (JSON): - Add JSON metrics for Yitian 710 DDR (aarch64). Things like: EventName, BriefDescription visible_window_limit_reached_rd, "At least one entry in read queue reaches the visible window limit.", visible_window_limit_reached_wr, "At least one entry in write queue reaches the visible window limit.", op_is_dqsosc_mpc , "A DQS Oscillator MPC command to DRAM.", op_is_dqsosc_mrr , "A DQS Oscillator MRR command to DRAM.", op_is_tcr_mrr , "A Temperature Compensated Refresh(TCR) MRR command to DRAM.", - Add AmpereOne metrics (aarch64). - Update N2 and V2 metrics (aarch64) and events using Arm telemetry repo. - Update scale units and descriptions of common topdown metrics on aarch64. Things like: - "MetricExpr": "stall_slot_frontend / (#slots * cpu_cycles)", - "BriefDescription": "Frontend bound L1 topdown metric", + "MetricExpr": "100 * (stall_slot_frontend / (#slots * cpu_cycles))", + "BriefDescription": "This metric is the percentage of total slots that were stalled due to resource constraints in the frontend of the processor.", - Update events for intel: meteorlake to 1.04, sapphirerapids to 1.15, Icelake+ metric constraints. - Update files for the power10 platform" * tag 'perf-tools-for-v6.6-1-2023-09-05' of git://git.kernel.org/pub/scm/linux/kernel/git/perf/perf-tools: (217 commits) perf parse-events: Fix driver config term perf parse-events: Fixes relating to no_value terms perf parse-events: Fix propagation of term's no_value when cloning perf parse-events: Name the two term enums perf list: Don't print Unit for "default_core" perf vendor events intel: Fix modifier in tma_info_system_mem_parallel_reads for skylake perf dlfilter: Avoid leak in v0 API test use of resolve_address() perf metric: Add #num_cpus_online literal perf pmu: Remove str from perf_pmu_alias perf parse-events: Make common term list to strbuf helper perf parse-events: Minor help message improvements perf pmu: Avoid uninitialized use of alias->str perf jevents: Use "default_core" for events with no Unit perf test stat_bpf_counters_cgrp: Enhance perf stat cgroup BPF counter test perf test shell stat_bpf_counters: Fix test on Intel perf test shell record_bpf_filter: Skip 6.2 kernel libperf: Get rid of attr.id field perf tools: Convert to perf_record_header_attr_id() libperf: Add perf_record_header_attr_id() perf tools: Handle old data in PERF_RECORD_ATTR ...
2023-09-08Merge tag 'xarray-6.6' of git://git.infradead.org/users/willy/xarrayLinus Torvalds1-2/+66
Pull xarray fixes from Matthew Wilcox: - Fix a bug encountered by people using bittorrent where they'd get NULL pointer dereferences on page cache lookups when using XFS - Two documentation fixes * tag 'xarray-6.6' of git://git.infradead.org/users/willy/xarray: idr: fix param name in idr_alloc_cyclic() doc xarray: Document necessary flag in alloc functions XArray: Do not return sibling entries from xa_load()
2023-09-08selftests/ftrace: Fix dependencies for some of the synthetic event testsNaveen N Rao2-2/+2
Commit b81a3a100cca1b ("tracing/histogram: Add simple tests for stacktrace usage of synthetic events") changed the output text in tracefs README, but missed updating some of the dependencies specified in selftests. This causes some of the tests to exit as unsupported. Fix this by changing the grep pattern. Since we want these tests to work on older kernels, match only against the common last part of the pattern. Link: https://lore.kernel.org/linux-trace-kernel/[email protected] Cc: <[email protected]> Cc: Masami Hiramatsu <[email protected]> Cc: Shuah Khan <[email protected]> Fixes: b81a3a100cca ("tracing/histogram: Add simple tests for stacktrace usage of synthetic events") Signed-off-by: Naveen N Rao <[email protected]> Signed-off-by: Steven Rostedt (Google) <[email protected]>
2023-09-08bpftool: Fix -Wcast-qual warningDenys Zagorui1-1/+1
This cast was made by purpose for older libbpf where the bpf_object_skeleton field is void * instead of const void * to eliminate a warning (as i understand -Wincompatible-pointer-types-discards-qualifiers) but this cast introduces another warning (-Wcast-qual) for libbpf where data field is const void * It makes sense for bpftool to be in sync with libbpf from kernel sources Signed-off-by: Denys Zagorui <[email protected]> Signed-off-by: Andrii Nakryiko <[email protected]> Acked-by: Quentin Monnet <[email protected]> Link: https://lore.kernel.org/bpf/[email protected]
2023-09-08selftests/bpf: Add kprobe_multi override testJiri Olsa2-0/+50
Adding test that tries to attach program with bpf_override_return helper to function not within error injection list. Signed-off-by: Jiri Olsa <[email protected]> Signed-off-by: Andrii Nakryiko <[email protected]> Link: https://lore.kernel.org/bpf/[email protected]
2023-09-08selftests/bpf: trace_helpers.c: Add a global ksyms initialization mutexRong Tao1-0/+4
As Jirka said [0], we just need to make sure that global ksyms initialization won't race. [0] https://lore.kernel.org/lkml/ZPCbAs3ItjRd8XVh@krava/ Signed-off-by: Rong Tao <[email protected]> Signed-off-by: Andrii Nakryiko <[email protected]> Acked-by: Jiri Olsa <[email protected]> Link: https://lore.kernel.org/bpf/[email protected]
2023-09-08selftests/bpf: trace_helpers.c: Optimize kallsyms cacheRong Tao4-46/+114
Static ksyms often have problems because the number of symbols exceeds the MAX_SYMS limit. Like changing the MAX_SYMS from 300000 to 400000 in commit e76a014334a6("selftests/bpf: Bump and validate MAX_SYMS") solves the problem somewhat, but it's not the perfect way. This commit uses dynamic memory allocation, which completely solves the problem caused by the limitation of the number of kallsyms. At the same time, add APIs: load_kallsyms_local() ksym_search_local() ksym_get_addr_local() free_kallsyms_local() There are used to solve the problem of selftests/bpf updating kallsyms after attach new symbols during testmod testing. Signed-off-by: Rong Tao <[email protected]> Signed-off-by: Andrii Nakryiko <[email protected]> Acked-by: Jiri Olsa <[email protected]> Acked-by: Stanislav Fomichev <[email protected]> Link: https://lore.kernel.org/bpf/[email protected]
2023-09-08Merge tag 'landlock-6.6-rc1' of ↵Linus Torvalds1-3/+5
git://git.kernel.org/pub/scm/linux/kernel/git/mic/linux Pull landlock updates from Mickaël Salaün: "One test fix and a __counted_by annotation" * tag 'landlock-6.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/mic/linux: selftests/landlock: Fix a resource leak landlock: Annotate struct landlock_rule with __counted_by
2023-09-08selftests: Keep symlinks, when possibleBjörn Töpel1-2/+2
When kselftest is built/installed with the 'gen_tar' target, rsync is used for the installation step to copy files. Extra care is needed for tests that have symlinks. Commit ae108c48b5d2 ("selftests: net: Fix cross-tree inclusion of scripts") added '-L' (transform symlink into referent file/dir) to rsync, to fix dangling links. However, that broke some tests where the symlink (being a symlink) is part of the test (e.g. exec:execveat). Use rsync's '--copy-unsafe-links' that does right thing. Fixes: ae108c48b5d2 ("selftests: net: Fix cross-tree inclusion of scripts") Signed-off-by: Björn Töpel <[email protected]> Reviewed-by: Benjamin Poirier <[email protected]> Signed-off-by: Shuah Khan <[email protected]>
2023-09-08selftests: fix dependency checker scriptRicardo B. Marliere1-12/+65
This patch fixes inconsistencies in the parsing rules of the levels 1 and 2 of the kselftest_deps.sh. It was added the levels 4 and 5 to account for a few edge cases that are present in some tests, also some minor identation styling have been fixed (s/ /\t/g). Signed-off-by: Ricardo B. Marliere <[email protected]> Signed-off-by: Shuah Khan <[email protected]>
2023-09-08kselftest/runner.sh: Propagate SIGTERM to runner childBjörn Töpel1-1/+2
Timeouts in kselftest are done using the "timeout" command with the "--foreground" option. Without the "foreground" option, it is not possible for a user to cancel the runner using SIGINT, because the signal is not propagated to timeout which is running in a different process group. The "forground" options places the timeout in the same process group as its parent, but only sends the SIGTERM (on timeout) signal to the forked process. Unfortunately, this does not play nice with all kselftests, e.g. "net:fcnal-test.sh", where the child processes will linger because timeout does not send SIGTERM to the group. Some users have noted these hangs [1]. Fix this by nesting the timeout with an additional timeout without the foreground option. Link: https://lore.kernel.org/all/[email protected]/ # [1] Fixes: 651e0d881461 ("kselftest/runner: allow to properly deliver signals to tests") Signed-off-by: Björn Töpel <[email protected]> Signed-off-by: Shuah Khan <[email protected]>
2023-09-08selftests/bpf: Test preemption between bpf_obj_new() and bpf_obj_drop()Hou Tao2-0/+195
The test case creates 4 threads and then pins these 4 threads in CPU 0. These 4 threads will run different bpf program through bpf_prog_test_run_opts() and these bpf program will use bpf_obj_new() and bpf_obj_drop() to allocate and free local kptrs concurrently. Under preemptible kernel, bpf_obj_new() and bpf_obj_drop() may preempt each other, bpf_obj_new() may return NULL and the test will fail before applying these fixes as shown below: test_preempted_bpf_ma_op:PASS:open_and_load 0 nsec test_preempted_bpf_ma_op:PASS:attach 0 nsec test_preempted_bpf_ma_op:PASS:no test prog 0 nsec test_preempted_bpf_ma_op:PASS:no test prog 0 nsec test_preempted_bpf_ma_op:PASS:no test prog 0 nsec test_preempted_bpf_ma_op:PASS:no test prog 0 nsec test_preempted_bpf_ma_op:PASS:pthread_create 0 nsec test_preempted_bpf_ma_op:PASS:pthread_create 0 nsec test_preempted_bpf_ma_op:PASS:pthread_create 0 nsec test_preempted_bpf_ma_op:PASS:pthread_create 0 nsec test_preempted_bpf_ma_op:PASS:run prog err 0 nsec test_preempted_bpf_ma_op:PASS:run prog err 0 nsec test_preempted_bpf_ma_op:PASS:run prog err 0 nsec test_preempted_bpf_ma_op:PASS:run prog err 0 nsec test_preempted_bpf_ma_op:FAIL:ENOMEM unexpected ENOMEM: got TRUE #168 preempted_bpf_ma_op:FAIL Summary: 0/0 PASSED, 0 SKIPPED, 1 FAILED Signed-off-by: Hou Tao <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Alexei Starovoitov <[email protected]>
2023-09-08bpf: Mark BPF_MAP_TYPE_PERCPU_CGROUP_STORAGE deprecatedYonghong Song3-2/+22
Now 'BPF_MAP_TYPE_CGRP_STORAGE + local percpu ptr' can cover all BPF_MAP_TYPE_PERCPU_CGROUP_STORAGE functionality and more. So mark BPF_MAP_TYPE_PERCPU_CGROUP_STORAGE deprecated. Also make changes in selftests/bpf/test_bpftool_synctypes.py and selftest libbpf_str to fix otherwise test errors. Signed-off-by: Yonghong Song <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Alexei Starovoitov <[email protected]>
2023-09-08selftests/bpf: Add some negative testsYonghong Song2-0/+171
Add a few negative tests for common mistakes with using percpu kptr including: - store to percpu kptr. - type mistach in bpf_kptr_xchg arguments. - sleepable prog with untrusted arg for bpf_this_cpu_ptr(). - bpf_percpu_obj_new && bpf_obj_drop, and bpf_obj_new && bpf_percpu_obj_drop - struct with ptr for bpf_percpu_obj_new - struct with special field (e.g., bpf_spin_lock) for bpf_percpu_obj_new Signed-off-by: Yonghong Song <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Alexei Starovoitov <[email protected]>
2023-09-08selftests/bpf: Add tests for cgrp_local_storage with local percpu kptrYonghong Song2-0/+145
Add a non-sleepable cgrp_local_storage test with percpu kptr. The test does allocation of percpu data, assigning values to percpu data and retrieval of percpu data. The de-allocation of percpu data is done when the map is freed. Signed-off-by: Yonghong Song <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Alexei Starovoitov <[email protected]>
2023-09-08selftests/bpf: Remove unnecessary direct read of local percpu kptrYonghong Song1-4/+0
For the second argument of bpf_kptr_xchg(), if the reg type contains MEM_ALLOC and MEM_PERCPU, which means a percpu allocation, after bpf_kptr_xchg(), the argument is marked as MEM_RCU and MEM_PERCPU if in rcu critical section. This way, re-reading from the map value is not needed. Remove it from the percpu_alloc_array.c selftest. Without previous kernel change, the test will fail like below: 0: R1=ctx(off=0,imm=0) R10=fp0 ; int BPF_PROG(test_array_map_10, int a) 0: (b4) w1 = 0 ; R1_w=0 ; int i, index = 0; 1: (63) *(u32 *)(r10 -4) = r1 ; R1_w=0 R10=fp0 fp-8=0000???? 2: (bf) r2 = r10 ; R2_w=fp0 R10=fp0 ; 3: (07) r2 += -4 ; R2_w=fp-4 ; e = bpf_map_lookup_elem(&array, &index); 4: (18) r1 = 0xffff88810e771800 ; R1_w=map_ptr(off=0,ks=4,vs=16,imm=0) 6: (85) call bpf_map_lookup_elem#1 ; R0_w=map_value_or_null(id=1,off=0,ks=4,vs=16,imm=0) 7: (bf) r6 = r0 ; R0_w=map_value_or_null(id=1,off=0,ks=4,vs=16,imm=0) R6_w=map_value_or_null(id=1,off=0,ks=4,vs=16,imm=0) ; if (!e) 8: (15) if r6 == 0x0 goto pc+81 ; R6_w=map_value(off=0,ks=4,vs=16,imm=0) ; bpf_rcu_read_lock(); 9: (85) call bpf_rcu_read_lock#87892 ; ; p = e->pc; 10: (bf) r7 = r6 ; R6=map_value(off=0,ks=4,vs=16,imm=0) R7_w=map_value(off=0,ks=4,vs=16,imm=0) 11: (07) r7 += 8 ; R7_w=map_value(off=8,ks=4,vs=16,imm=0) 12: (79) r6 = *(u64 *)(r6 +8) ; R6_w=percpu_rcu_ptr_or_null_val_t(id=2,off=0,imm=0) ; if (!p) { 13: (55) if r6 != 0x0 goto pc+13 ; R6_w=0 ; p = bpf_percpu_obj_new(struct val_t); 14: (18) r1 = 0x12 ; R1_w=18 16: (b7) r2 = 0 ; R2_w=0 17: (85) call bpf_percpu_obj_new_impl#87883 ; R0_w=percpu_ptr_or_null_val_t(id=4,ref_obj_id=4,off=0,imm=0) refs=4 18: (bf) r6 = r0 ; R0=percpu_ptr_or_null_val_t(id=4,ref_obj_id=4,off=0,imm=0) R6=percpu_ptr_or_null_val_t(id=4,ref_obj_id=4,off=0,imm=0) refs=4 ; if (!p) 19: (15) if r6 == 0x0 goto pc+69 ; R6=percpu_ptr_val_t(ref_obj_id=4,off=0,imm=0) refs=4 ; p1 = bpf_kptr_xchg(&e->pc, p); 20: (bf) r1 = r7 ; R1_w=map_value(off=8,ks=4,vs=16,imm=0) R7=map_value(off=8,ks=4,vs=16,imm=0) refs=4 21: (bf) r2 = r6 ; R2_w=percpu_ptr_val_t(ref_obj_id=4,off=0,imm=0) R6=percpu_ptr_val_t(ref_obj_id=4,off=0,imm=0) refs=4 22: (85) call bpf_kptr_xchg#194 ; R0_w=percpu_ptr_or_null_val_t(id=6,ref_obj_id=6,off=0,imm=0) refs=6 ; if (p1) { 23: (15) if r0 == 0x0 goto pc+3 ; R0_w=percpu_ptr_val_t(ref_obj_id=6,off=0,imm=0) refs=6 ; bpf_percpu_obj_drop(p1); 24: (bf) r1 = r0 ; R0_w=percpu_ptr_val_t(ref_obj_id=6,off=0,imm=0) R1_w=percpu_ptr_val_t(ref_obj_id=6,off=0,imm=0) refs=6 25: (b7) r2 = 0 ; R2_w=0 refs=6 26: (85) call bpf_percpu_obj_drop_impl#87882 ; ; v = bpf_this_cpu_ptr(p); 27: (bf) r1 = r6 ; R1_w=scalar(id=7) R6=scalar(id=7) 28: (85) call bpf_this_cpu_ptr#154 R1 type=scalar expected=percpu_ptr_, percpu_rcu_ptr_, percpu_trusted_ptr_ The R1 which gets its value from R6 is a scalar. But before insn 22, R6 is R6=percpu_ptr_val_t(ref_obj_id=4,off=0,imm=0) Its type is changed to a scalar at insn 22 without previous patch. Signed-off-by: Yonghong Song <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Alexei Starovoitov <[email protected]>
2023-09-08selftests/bpf: Add tests for array map with local percpu kptrYonghong Song2-0/+265
Add non-sleepable and sleepable tests with percpu kptr. For non-sleepable test, four programs are executed in the order of: 1. allocate percpu data. 2. assign values to percpu data. 3. retrieve percpu data. 4. de-allocate percpu data. The sleepable prog tried to exercise all above 4 steps in a single prog. Also for sleepable prog, rcu_read_lock is needed to protect direct percpu ptr access (from map value) and following bpf_this_cpu_ptr() and bpf_per_cpu_ptr() helpers. Signed-off-by: Yonghong Song <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Alexei Starovoitov <[email protected]>
2023-09-08selftests/bpf: Add bpf_percpu_obj_{new,drop}() macro in bpf_experimental.hYonghong Song1-0/+31
The new macro bpf_percpu_obj_{new/drop}() is very similar to bpf_obj_{new,drop}() as they both take a type as the argument. Signed-off-by: Yonghong Song <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Alexei Starovoitov <[email protected]>
2023-09-08libbpf: Add __percpu_kptr macro definitionYonghong Song1-0/+1
Add __percpu_kptr macro definition in bpf_helpers.h. Signed-off-by: Yonghong Song <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Alexei Starovoitov <[email protected]>
2023-09-08selftests/bpf: Update error message in negative linked_list testYonghong Song1-2/+2
Some error messages are changed due to the addition of percpu kptr support. Fix linked_list test with changed error messages. Signed-off-by: Yonghong Song <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Alexei Starovoitov <[email protected]>
2023-09-08libbpf: Add basic BTF sanity validationAndrii Nakryiko2-2/+162
Implement a simple and straightforward BTF sanity check when parsing BTF data. Right now it's very basic and just validates that all the string offsets and type IDs are within valid range. For FUNC we also check that it points to FUNC_PROTO kinds. Even with such simple checks it fixes a bunch of crashes found by OSS fuzzer ([0]-[5]) and will allow fuzzer to make further progress. Some other invariants will be checked in follow up patches (like ensuring there is no infinite type loops), but this seems like a good start already. Adding FUNC -> FUNC_PROTO check revealed that one of selftests has a problem with FUNC pointing to VAR instead, so fix it up in the same commit. [0] https://github.com/libbpf/libbpf/issues/482 [1] https://github.com/libbpf/libbpf/issues/483 [2] https://github.com/libbpf/libbpf/issues/485 [3] https://github.com/libbpf/libbpf/issues/613 [4] https://github.com/libbpf/libbpf/issues/618 [5] https://github.com/libbpf/libbpf/issues/619 Signed-off-by: Andrii Nakryiko <[email protected]> Signed-off-by: Daniel Borkmann <[email protected]> Reviewed-by: Alan Maguire <[email protected]> Reviewed-by: Song Liu <[email protected]> Closes: https://github.com/libbpf/libbpf/issues/617 Link: https://lore.kernel.org/bpf/[email protected]
Powered by cgit, Gruvboxed by Blaster4385.