aboutsummaryrefslogtreecommitdiff
path: root/tools
AgeCommit message (Collapse)AuthorFilesLines
2017-04-08Merge tag 'powerpc-4.11-7' of ↵Linus Torvalds1-5/+5
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux Pull powerpc fixes from Michael Ellerman: "Some more powerpc fixes for 4.11: Headed to stable: - disable HFSCR[TM] if TM is not supported, fixes a potential host kernel crash triggered by a hostile guest, but only in configurations that no one uses - don't try to fix up misaligned load-with-reservation instructions - fix flush_(d|i)cache_range() called from modules on little endian kernels - add missing global TLB invalidate if cxl is active - fix missing preempt_disable() in crc32c-vpmsum And a fix for selftests build changes that went in this release: - selftests/powerpc: Fix standalone powerpc build Thanks to: Benjamin Herrenschmidt, Frederic Barrat, Oliver O'Halloran, Paul Mackerras" * tag 'powerpc-4.11-7' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: powerpc/crypto/crc32c-vpmsum: Fix missing preempt_disable() powerpc/mm: Add missing global TLB invalidate if cxl is active powerpc/64: Fix flush_(d|i)cache_range() called from modules powerpc: Don't try to fix up misaligned load-with-reservation instructions powerpc: Disable HFSCR[TM] if TM is not supported selftests/powerpc: Fix standalone powerpc build
2017-04-08usb: usbip tool: Fix get_nports()Yuyang Du1-23/+5
The commit 0775a9cbc694e8c72 ("usbip: vhci extension: modifications to vhci driver") introduced multiple controllers, and nports as a sys file, and claimed to read the nports from it, but it didn't. In addition, the get_nports() has been so wrong that even with 8 port lines for instance, it gets 7 (I am guessing it is due to a '\n' mess). Nevertheless, we fix it by reading the nports attribute. Reviewed-by: Krzysztof Opasiak <[email protected]> Signed-off-by: Yuyang Du <[email protected]> Acked-by: Shuah Khan <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
2017-04-07perf annotate s390: Fix perf annotate error -95 (4.10 regression)Christian Borntraeger1-0/+6
since 4.10 perf annotate exits on s390 with an "unknown error -95". Turns out that commit 786c1b51844d ("perf annotate: Start supporting cross arch annotation") added a hard requirement for architecture support when objdump is used but only provided x86 and arm support. Meanwhile power was added so lets add s390 as well. While at it make sure to implement the branch and jump types. Signed-off-by: Christian Borntraeger <[email protected]> Cc: Andreas Krebbel <[email protected]> Cc: Hendrik Brueckner <[email protected]> Cc: Martin Schwidefsky <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: linux-s390 <[email protected]> Cc: [email protected] # v4.10+ Fixes: 786c1b51844 "perf annotate: Start supporting cross arch annotation" Link: http://lkml.kernel.org/r/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2017-04-06selftests/bpf: fix merge conflictAlexei Starovoitov1-5/+0
fix artifact of merge resolution Signed-off-by: Alexei Starovoitov <[email protected]> Acked-by: Daniel Borkmann <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2017-04-06Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller3-6/+308
Mostly simple cases of overlapping changes (adding code nearby, a function whose name changes, for example). Signed-off-by: David S. Miller <[email protected]>
2017-04-05selftests: add a generic testsuite for ethernet deviceLABBE Corentin2-1/+201
This patch add a generic testsuite for testing ethernet network device driver. Signed-off-by: Corentin Labbe <[email protected]> Tested-by: Andrew Lunn <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2017-04-04perf annotate: Fix missing number of samples for source_line_samplesTaeung Song2-3/+5
The option 'show-total-period' works fine without a option '-l'. But if running 'perf annotate --stdio -l --show-total-period', you can see a problem showing only zero '0' for number of samples. Before: $ perf annotate --stdio -l --show-total-period ... 0 : 400816: push %rbp 0 : 400817: mov %rsp,%rbp 0 : 40081a: mov %edi,-0x24(%rbp) 0 : 40081d: mov %rsi,-0x30(%rbp) 0 : 400821: mov -0x24(%rbp),%eax 0 : 400824: mov -0x30(%rbp),%rdx 0 : 400828: mov (%rdx),%esi 0 : 40082a: mov $0x0,%edx ... The reason is it was missed to set number of samples of source_line_samples, so set it ordinarily. After: $ perf annotate --stdio -l --show-total-period ... 3 : 400816: push %rbp 4 : 400817: mov %rsp,%rbp 0 : 40081a: mov %edi,-0x24(%rbp) 0 : 40081d: mov %rsi,-0x30(%rbp) 1 : 400821: mov -0x24(%rbp),%eax 2 : 400824: mov -0x30(%rbp),%rdx 0 : 400828: mov (%rdx),%esi 1 : 40082a: mov $0x0,%edx ... Signed-off-by: Taeung Song <[email protected]> Cc: Jiri Olsa <[email protected]> Cc: Martin Liska <[email protected]> Cc: Masami Hiramatsu <[email protected]> Cc: Namhyung Kim <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: Wang Nan <[email protected]> Fixes: 0c4a5bcea460 ("perf annotate: Display total number of samples with --show-total-period") Link: http://lkml.kernel.org/r/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2017-04-04perf tools: Don't die on a print functionArnaldo Carvalho de Melo1-2/+7
Trying to remove die() calls from library functions, postponing exiting to the tool main code. Link: http://lkml.kernel.org/n/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2017-04-04perf tools: Handle allocation failures gracefullyArnaldo Carvalho de Melo1-15/+39
The callers of perf_read_values__enlarge_counters() already propagate errors, so just print some debug diagnostics and handle allocation failures gracefully, not trying to do silly things like 'a = realloc(a)'. Link: http://lkml.kernel.org/n/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2017-04-04perf tools: Remove die() callArnaldo Carvalho de Melo1-1/+2
We can just use the exit() right after the branch calling die(). Link: http://lkml.kernel.org/n/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2017-04-04tracing/kprobes: expose maxactive for kretprobe in kprobe_eventsAlban Crequy1-0/+39
When a kretprobe is installed on a kernel function, there is a maximum limit of how many calls in parallel it can catch (aka "maxactive"). A kernel module could call register_kretprobe() and initialize maxactive (see example in samples/kprobes/kretprobe_example.c). But that is not exposed to userspace and it is currently not possible to choose maxactive when writing to /sys/kernel/debug/tracing/kprobe_events The default maxactive can be as low as 1 on single-core with a non-preemptive kernel. This is too low and we need to increase it not only for recursive functions, but for functions that sleep or resched. This patch updates the format of the command that can be written to kprobe_events so that maxactive can be optionally specified. I need this for a bpf program attached to the kretprobe of inet_csk_accept, which can sleep for a long time. This patch includes a basic selftest: > # ./ftracetest -v test.d/kprobe/ > === Ftrace unit tests === > [1] Kprobe dynamic event - adding and removing [PASS] > [2] Kprobe dynamic event - busy event check [PASS] > [3] Kprobe dynamic event with arguments [PASS] > [4] Kprobes event arguments with types [PASS] > [5] Kprobe dynamic event with function tracer [PASS] > [6] Kretprobe dynamic event with arguments [PASS] > [7] Kretprobe dynamic event with maxactive [PASS] > > # of passed: 7 > # of failed: 0 > # of unresolved: 0 > # of untested: 0 > # of unsupported: 0 > # of xfailed: 0 > # of undefined(test bug): 0 BugLink: https://github.com/iovisor/bcc/issues/1072 Link: http://lkml.kernel.org/r/[email protected] Acked-by: Masami Hiramatsu <[email protected]> Signed-off-by: Alban Crequy <[email protected]> Signed-off-by: Steven Rostedt (VMware) <[email protected]>
2017-04-04Merge branch 'perf/uncore-json-updates-1' of ↵Arnaldo Carvalho de Melo7-3/+1546
git://git.kernel.org/pub/scm/linux/kernel/git/ak/linux-misc into perf/core Pull perf/core improvements from Andi Kleen: This pull requests contains updates to the Intel PMU events JSON files, plus two one liner code fixes for the JSON files (also appended as patch) The most remarkable change is support for Sandy Bridge to Skylake client uncore event list support. Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2017-04-04perf sdt powerpc: Add argument supportRavi Bangoria1-0/+111
SDT marker argument is in N@OP format. Here OP is arch dependent component. Add powerpc logic to parse OP and convert it to uprobe compatible format. Signed-off-by: Ravi Bangoria <[email protected]> Acked-by: Masami Hiramatsu <[email protected]> Cc: Alexander Shishkin <[email protected]> Cc: Alexis Berlemont <[email protected]> Cc: Hemant Kumar <[email protected]> Cc: Michael Ellerman <[email protected]> Cc: Naveen N. Rao <[email protected]> Cc: Peter Zijlstra <[email protected]> Link: http://lkml.kernel.org/r/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2017-04-03Merge tag 'v4.11-rc5' into x86/mm, to refresh the branchIngo Molnar3-13/+37
Signed-off-by: Ingo Molnar <[email protected]>
2017-04-01selftests/bpf: add l4 load balancer test based on sched_clsAlexei Starovoitov3-1/+563
this l4lb demo is a comprehensive test case for LLVM codegen and kernel verifier. It's using fully inlined jhash(), complex packet parsing and multiple map lookups of different types to stress llvm and verifier. The map sizes, map population and test vectors are artificial to exercise different paths through the bpf program. Signed-off-by: Alexei Starovoitov <[email protected]> Acked-by: Daniel Borkmann <[email protected]> Acked-by: Martin KaFai Lau <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2017-04-01selftests/bpf: add a test for basic XDP functionalityAlexei Starovoitov4-1/+332
add C test for xdp_adjust_head(), packet rewrite and map lookups Signed-off-by: Alexei Starovoitov <[email protected]> Acked-by: Daniel Borkmann <[email protected]> Acked-by: Martin KaFai Lau <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2017-04-01selftests/bpf: add a test for overlapping packet range checksAlexei Starovoitov3-4/+215
add simple C test case for llvm and verifier range check fix from commit b1977682a385 ("bpf: improve verifier packet range checks") Signed-off-by: Alexei Starovoitov <[email protected]> Acked-by: Daniel Borkmann <[email protected]> Acked-by: Martin KaFai Lau <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2017-04-01tools/lib/bpf: expose bpf_program__set_type()Alexei Starovoitov2-2/+3
expose bpf_program__set_type() to set program type Signed-off-by: Alexei Starovoitov <[email protected]> Acked-by: Daniel Borkmann <[email protected]> Acked-by: Martin KaFai Lau <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2017-04-01tools/lib/bpf: add support for BPF_PROG_TEST_RUN commandAlexei Starovoitov3-1/+51
add support for BPF_PROG_TEST_RUN command to libbpf.a Signed-off-by: Alexei Starovoitov <[email protected]> Acked-by: Daniel Borkmann <[email protected]> Acked-by: Martin KaFai Lau <[email protected]> Acked-by: Wang Nan <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2017-04-01bpf: add various verifier test cases for self-testsDaniel Borkmann3-6/+283
Add a couple of test cases, for example, probing for xadd on a spilled pointer to packet and map_value_adj register, various other map_value_adj tests including the unaligned load/store, and trying out pointer arithmetic on map_value_adj register itself. For the unaligned load/store, we need to figure out whether the architecture has efficient unaligned access and need to mark affected tests accordingly. Signed-off-by: Daniel Borkmann <[email protected]> Acked-by: Alexei Starovoitov <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2017-04-01Merge tag 'perf-core-for-mingo-4.12-20170331' of ↵Ingo Molnar24-403/+707
git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux into perf/core Pull perf/core improvements and fixes from Arnaldo Carvalho de Melo: New features: - Beautify the statx syscall arguments in 'perf trace' (Arnaldo Carvalho de Melo) e.g.: System wide strace like session: # trace -e statx 16612.967 ( 0.028 ms): statx/4562 statx(dfd: CWD, filename: /tmp/statx, flags: SYMLINK_NOFOLLOW, mask: TYPE|MODE|NLINK|UID|GID|ATIME|MTIME|CTIME|INO|SIZE|BLOCKS|BTIME, buffer: 0x7ffef195d660) = 0 36050.891 ( 0.007 ms): statx/4576 statx(dfd: CWD, filename: /etc/passwd, flags: SYMLINK_NOFOLLOW|STATX_DONT_SYNC, mask: BTIME, buffer: 0x7ffda9bf50f0) = 0 ^C# User visible changes: - Handle unpaired raw_syscalls:sys_exit events in 'perf trace', i.e. we shouldn't try to calculate duration or print the timestamp for a missing matching raw_syscalls:sys_enter (Arnaldo Carvalho de Melo) - Do not print "cycles: 0" in perf report LBR lines in platforms not supporting 'cycles', such as Intel's Broadwell (Jin Yao) - Handle missing $HOME env var (Jiri Olsa) - Map 8-bit registers (al, bl, etc), not supported in uprobes_events, to the next best thing (ax, bx, etc) supported (Ravi Bangoria) Signed-off-by: Arnaldo Carvalho de Melo <[email protected]> Signed-off-by: Ingo Molnar <[email protected]>
2017-03-31perf trace: Beautify statx syscall 'flag' and 'mask' argumentsArnaldo Carvalho de Melo6-9/+104
To test it, build samples/statx/test_statx, which I did as: $ make headers_install $ cc -I ~/git/linux/usr/include samples/statx/test-statx.c -o /tmp/statx And then use perf trace on it: # perf trace -e statx /tmp/statx /etc/passwd statx(/etc/passwd) = 0 results=7ff Size: 3496 Blocks: 8 IO Block: 4096 regular file Device: fd:00 Inode: 280156 Links: 1 Access: (0644/-rw-r--r--) Uid: 0 Gid: 0 Access: 2017-03-29 16:01:01.650073438-0300 Modify: 2017-03-10 16:25:14.156479354-0300 Change: 2017-03-10 16:25:14.171479328-0300 0.000 ( 0.007 ms): statx/30648 statx(dfd: CWD, filename: 0x7ef503f4, flags: SYMLINK_NOFOLLOW, mask: TYPE|MODE|NLINK|UID|GID|ATIME|MTIME|CTIME|INO|SIZE|BLOCKS|BTIME, buffer: 0x7fff7ef4eb10) = 0 # Using the test-stat.c options to change the mask: # perf trace -e statx /tmp/statx -O /etc/passwd > /dev/null 0.000 ( 0.008 ms): statx/30745 statx(dfd: CWD, filename: 0x3a0753f4, flags: SYMLINK_NOFOLLOW, mask: BTIME, buffer: 0x7ffd3a0735c0) = 0 # # perf trace -e statx /tmp/statx -A /etc/passwd > /dev/null 0.000 ( 0.010 ms): statx/30757 statx(dfd: CWD, filename: 0xa94e63f4, flags: SYMLINK_NOFOLLOW|NO_AUTOMOUNT, mask: TYPE|MODE|NLINK|UID|GID|ATIME|MTIME|CTIME|INO|SIZE|BLOCKS|BTIME, buffer: 0x7ffea94e49d0) = 0 # # trace --no-inherit -e statx /tmp/statx -F /etc/passwd > /dev/null 0.000 ( 0.011 ms): statx(dfd: CWD, filename: 0x3b02d3f3, flags: SYMLINK_NOFOLLOW|STATX_FORCE_SYNC, mask: TYPE|MODE|NLINK|UID|GID|ATIME|MTIME|CTIME|INO|SIZE|BLOCKS|BTIME, buffer: 0x7ffd3b02c850) = 0 # # trace --no-inherit -e statx /tmp/statx -F -L /etc/passwd > /dev/null 0.000 ( 0.008 ms): statx(dfd: CWD, filename: 0x15cff3f3, flags: STATX_FORCE_SYNC, mask: TYPE|MODE|NLINK|UID|GID|ATIME|MTIME|CTIME|INO|SIZE|BLOCKS|BTIME, buffer: 0x7fff15cfdda0) = 0 # # trace --no-inherit -e statx /tmp/statx -D -O /etc/passwd > /dev/null 0.000 ( 0.009 ms): statx(dfd: CWD, filename: 0xfa37f3f3, flags: SYMLINK_NOFOLLOW|STATX_DONT_SYNC, mask: BTIME, buffer: 0x7ffffa37da20) = 0 # Adding a probe to get the filename collected as well: # perf probe 'vfs_getname=getname_flags:72 pathname=result->name:string' Added new event: probe:vfs_getname (on getname_flags:72 with pathname=result->name:string) You can now use it in all perf tools, such as: perf record -e probe:vfs_getname -aR sleep 1 # trace --no-inherit -e statx /tmp/statx -D -O /etc/passwd > /dev/null 0.169 ( 0.007 ms): statx(dfd: CWD, filename: /etc/passwd, flags: SYMLINK_NOFOLLOW|STATX_DONT_SYNC, mask: BTIME, buffer: 0x7ffda9bf50f0) = 0 # Same technique could be used to collect and beautify the result put in the 'buffer' argument. Finally do a system wide 'perf trace' session looking for any use of statx, then run the test proggie with various flags: # trace -e statx 16612.967 ( 0.028 ms): statx/4562 statx(dfd: CWD, filename: /tmp/statx, flags: SYMLINK_NOFOLLOW, mask: TYPE|MODE|NLINK|UID|GID|ATIME|MTIME|CTIME|INO|SIZE|BLOCKS|BTIME, buffer: 0x7ffef195d660) = 0 33064.447 ( 0.011 ms): statx/4569 statx(dfd: CWD, filename: /tmp/statx, flags: SYMLINK_NOFOLLOW|STATX_FORCE_SYNC, mask: TYPE|MODE|NLINK|UID|GID|ATIME|MTIME|CTIME|INO|SIZE|BLOCKS|BTIME, buffer: 0x7ffc5484c790) = 0 36050.891 ( 0.023 ms): statx/4576 statx(dfd: CWD, filename: /tmp/statx, flags: SYMLINK_NOFOLLOW, mask: BTIME, buffer: 0x7ffeb18b66e0) = 0 38039.889 ( 0.023 ms): statx/4584 statx(dfd: CWD, filename: /tmp/statx, flags: SYMLINK_NOFOLLOW, mask: TYPE|MODE|NLINK|UID|GID|ATIME|MTIME|CTIME|INO|SIZE|BLOCKS|BTIME, buffer: 0x7fff1db0ea90) = 0 ^C# This one also starts moving the beautifiers from files directly included in builtin-trace.c to separate objects + a beauty.h header with prototypes, so that we can add test cases in tools/perf/tests/ to fire syscalls with various arguments and then get them intercepted as syscalls:sys_enter_foo or raw_syscalls:sys_enter + sys_exit to then format and check that the formatted output is the one we expect. Cc: Adrian Hunter <[email protected]> Cc: Al Viro <[email protected]> Cc: David Ahern <[email protected]> Cc: David Howells <[email protected]> Cc: Jiri Olsa <[email protected]> Cc: Namhyung Kim <[email protected]> Cc: Wang Nan <[email protected]> Link: http://lkml.kernel.org/n/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2017-03-31perf tools: Do not fail in case of empty HOME env variableJiri Olsa1-23/+31
Currently we fail in the following case: $ unset HOME $ ./perf record ls $ echo $? 255 It's because the config code init fails due to a missing HOME variable value. Fix this by skipping the user config init if there's no HOME variable value. Reported-by: Jan Stancek <[email protected]> Signed-off-by: Jiri Olsa <[email protected]> Cc: David Ahern <[email protected]> Cc: Namhyung Kim <[email protected]> Cc: Peter Zijlstra <[email protected]> Link: http://lkml.kernel.org/r/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2017-03-31tools include uapi: Grab copies of stat.h and fcntl.hArnaldo Carvalho de Melo5-0/+253
We will need it to build tools/perf/trace/beauty/statx.h. Cc: Adrian Hunter <[email protected]> Cc: David Ahern <[email protected]> Cc: Jiri Olsa <[email protected]> Cc: Namhyung Kim <[email protected]> Cc: Wang Nan <[email protected]> Link: http://lkml.kernel.org/n/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2017-03-30perf vendor events intel: Add missing space in json descriptionsAndi Kleen1-0/+1
Add a missing space in the JSON description after the uncore unit Before: perf list ... unc_arb_coh_trk_requests.all [Unit: uncore_arbNumber of entries allocated. Account for Any type: e.g. Snoop, Core aperture, etc] ... After: unc_arb_coh_trk_requests.all [Unit: uncore_arb Number of entries allocated. Account for Any type: e.g. Snoop, Core aperture, etc] Cc: [email protected] Link: http://lkml.kernel.org/n/[email protected] Signed-off-by: Andi Kleen <[email protected]>
2017-03-30perf vendor events intel: Add uncore_arb JSON supportAndi Kleen1-0/+1
The JSON lists call the box iMPH-U, while perf calls it arb. Add conversion support to json to convert the unit properly. Cc: [email protected] Link: http://lkml.kernel.org/n/[email protected] Signed-off-by: Andi Kleen <[email protected]>
2017-03-30perf vendor events intel: Add uncore events for Skylake clientAndi Kleen1-0/+254
Add V25 of Skylake uncore events Cc: [email protected] Link: http://lkml.kernel.org/n/[email protected] Signed-off-by: Andi Kleen <[email protected]>
2017-03-30perf vendor events intel: Add uncore events for Broadwell clientAndi Kleen1-0/+278
Add V18 of Broadwell uncore events Cc: [email protected] Link: http://lkml.kernel.org/n/[email protected] Signed-off-by: Andi Kleen <[email protected]>
2017-03-30perf vendor events intel: Add uncore events for Haswell clientAndi Kleen1-0/+374
Add V25 of Haswell uncore events Cc: [email protected] Link: http://lkml.kernel.org/n/[email protected] Signed-off-by: Andi Kleen <[email protected]>
2017-03-30perf vendor events intel: Add uncore events for Ivy Bridge clientAndi Kleen1-0/+314
Add V18 of Ivy Bridge uncore events Cc: [email protected] Link: http://lkml.kernel.org/n/[email protected] Signed-off-by: Andi Kleen <[email protected]>
2017-03-30perf vendor events intel: Add uncore events for Sandy Bridge clientAndi Kleen1-0/+314
Add V15 of Sandy Bridge uncore events Cc: [email protected] Link: http://lkml.kernel.org/n/[email protected] Signed-off-by: Andi Kleen <[email protected]>
2017-03-30perf vendor events intel: Add missing UNC_M_DCLOCKTICKS for Broadwell DE uncoreAndi Kleen1-3/+10
An earlier update removed the UNC_M_CLOCKTICKS event for Broadwell DE. But Metric events were still referring to it. This adds it back under a different name from the event list, and also fixes up the Metric events to use the new name. Cc: [email protected] Link: http://lkml.kernel.org/n/[email protected] Signed-off-by: Andi Kleen <[email protected]>
2017-03-30perf utils: Fix spelling mistake: "Invalud" -> "Invalid"Colin Ian King1-1/+1
Trivial fix to spelling mistake in pr_debug message. Signed-off-by: Colin King <[email protected]> Cc: Alexander Shishkin <[email protected]> Cc: Jiri Olsa <[email protected]> Cc: Namhyung Kim <[email protected]> Cc: Krister Johansen <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: [email protected] Link: http://lkml.kernel.org/r/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2017-03-30Merge branch 'linus' into perf/core, to pick up fixesIngo Molnar2-12/+36
Signed-off-by: Ingo Molnar <[email protected]>
2017-03-29perf trace: Handle unpaired raw_syscalls:sys_exit eventArnaldo Carvalho de Melo1-9/+34
Which may happen when we start a tracing session and a thread is waiting for something like "poll" to return, in which case we better print "?" both for the syscall entry timestamp and for the duration. E.g.: Tracing existing mutt session: # perf trace -p `pidof mutt` ? ( ? ): mutt/17135 ... [continued]: poll()) = 1 0.027 ( 0.013 ms): mutt/17135 read(buf: 0x7ffcb3c42cef, count: 1) = 1 0.047 ( 0.008 ms): mutt/17135 poll(ufds: 0x7ffcb3c42c50, nfds: 1, timeout_msecs: 1000) = 1 0.059 ( 0.008 ms): mutt/17135 read(buf: 0x7ffcb3c42cef, count: 1) = 1 <SNIP> Before it would print a large number because we'd do: ttrace->entry_time - trace->base_time And entry_time would be 0, while base_time would be the timestamp for the first event 'perf trace' reads, oops. Cc: Adrian Hunter <[email protected]> Cc: David Ahern <[email protected]> Cc: Jiri Olsa <[email protected]> Cc: Luis Claudio Gonçalves <[email protected]> Cc: Namhyung Kim <[email protected]> Cc: Wang Nan <[email protected]> Link: http://lkml.kernel.org/n/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2017-03-28perf report: Drop cycles 0 for LBR printJin Yao1-37/+74
For some platforms, for example Broadwell, it doesn't support cycles for LBR. But the perf always prints cycles:0, it's not necessary. The patch refactors the LBR info print code and drops the cycles:0. For example: perf report --branch-history --no-children --stdio On Broadwell: --0.91%--__random_r random_r.c:394 (iterations:2) __random_r random_r.c:360 (predicted:0.0%) __random_r random_r.c:380 (predicted:0.0%) __random_r random_r.c:357 On Skylake: --1.07%--main div.c:39 (predicted:52.4% cycles:1 iterations:17) main div.c:44 (predicted:52.4% cycles:1) main div.c:42 (cycles:2) compute_flag div.c:28 (cycles:2) compute_flag div.c:27 (cycles:1) rand rand.c:28 (cycles:1) rand rand.c:28 (cycles:1) __random random.c:298 (cycles:1) __random random.c:297 (cycles:1) __random random.c:295 (cycles:1) __random random.c:295 (cycles:1) __random random.c:295 (cycles:1) Signed-off-by: Yao Jin <[email protected]> Reviewed-by: Andi Kleen <[email protected]> Cc: Jiri Olsa <[email protected]> Cc: Kan Liang <[email protected]> Link: http://lkml.kernel.org/r/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2017-03-28perf/sdt/x86: Move OP parser to tools/perf/arch/x86/Ravi Bangoria4-134/+194
SDT marker argument is in N@OP format. N is the size of argument and OP is the actual assembly operand. OP is arch dependent component and hence it's parsing logic also should be placed under tools/perf/arch/. Signed-off-by: Ravi Bangoria <[email protected]> Acked-by: Masami Hiramatsu <[email protected]> Cc: Alexander Shishkin <[email protected]> Cc: Alexis Berlemont <[email protected]> Cc: Hemant Kumar <[email protected]> Cc: Michael Ellerman <[email protected]> Cc: Naveen N. Rao <[email protected]> Cc: Peter Zijlstra <[email protected]> Link: http://lkml.kernel.org/r/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2017-03-28perf/sdt/x86: Add renaming logic for (missing) 8 bit registersRavi Bangoria1-0/+8
I found couple of events using al, bl, cl and dl registers for argument. These are not directly accepted by uprobe_events and thus needs to be mapped to ax, bx, cx and dx respectively. Few ex, /usr/bin/qemu-system-s390x css_adapter_interrupt: 1@%bl css_chpid_add: 1@%cl 1@%sil 1@%dl dma_bdrv_io: 8@%rbx 8@%rbp -8@%r14 1@%al /usr/bin/postgres buffer__read__done: ... -1@-bash -1@%al buffer__read__start: ... -1@%al I don't find any sdt events using ah, bh,... registers. But I also don't see any reason to not use them, so there might be rare events using these registers, and if so, perf should have a renaming logic for them too. Signed-off-by: Ravi Bangoria <[email protected]> Acked-by: Masami Hiramatsu <[email protected]> Cc: Alexander Shishkin <[email protected]> Cc: Alexis Berlemont <[email protected]> Cc: Hemant Kumar <[email protected]> Cc: Michael Ellerman <[email protected]> Cc: Naveen N. Rao <[email protected]> Cc: Peter Zijlstra <[email protected]> Link: http://lkml.kernel.org/r/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2017-03-28perf tools: Remove support for command aliasesArnaldo Carvalho de Melo6-190/+8
This came from 'git', but isn't documented anywhere in tools/perf/Documentation/, looks like baggage we can do without, ditch it. Cc: Adrian Hunter <[email protected]> Cc: David Ahern <[email protected]> Cc: Jiri Olsa <[email protected]> Cc: Namhyung Kim <[email protected]> Cc: Wang Nan <[email protected]> Link: http://lkml.kernel.org/n/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2017-03-28Backmerge tag 'v4.11-rc4' into drm-nextDave Airlie2-12/+36
Linux 4.11-rc4 The i915 GVT team need the rc4 code to base some more code on.
2017-03-28Merge tag 'perf-core-for-mingo-4.12-20170327' of ↵Ingo Molnar62-208/+739
git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux into perf/core Pull perf/core improvements and fixes from Arnaldo Carvalho de Melo: New features: - Handle inline functions in callchains (Jin Yao) - Enable sorting by srcline as key (Milian Wolff) Fixes: - Fix no_size logic in addr_filter__resolve_kernel_syms() in the auxtrace code (Adrian Hunter) - Fix some thread refcount leaks in 'perf trace' (Arnaldo Carvalho de Melo) - Fix divide by zero when calculating percent for an event in a group in the annotate by source line code (Taeung Song) - build-id files now aren't anymore symlinks, their parent directories are, so readlink the later (Taeung Song) - Assorted fixes for null termination problems, mostly related to readlink, detected by valgrind (Tommi Rantala) Infrastructure changes: - Make vfs_getname probe point logic in 'perf trace' more robust wrt length of pathname (Arnaldo Carvalho de Melo) - Remove unused 'prefix' parameter from builtins main functions (Arnaldo Carvalho de Melo) - Show 'perf list sdt' option in man page (Ravi Bangoria) Signed-off-by: Arnaldo Carvalho de Melo <[email protected]> Signed-off-by: Ingo Molnar <[email protected]>
2017-03-28Merge branch 'perf/urgent' into perf/core, to pick up fixesIngo Molnar1-1/+1
Signed-off-by: Ingo Molnar <[email protected]>
2017-03-27perf utils: Readlink /proc/self/exe to find the perf binaryTommi Rantala1-6/+2
Simplification: it is easier to open /proc/self/exe than /proc/$pid/exe. Signed-off-by: Tommi Rantala <[email protected]> Cc: Alexander Shishkin <[email protected]> Cc: Peter Zijlstra <[email protected]> Link: http://lkml.kernel.org/r/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2017-03-27perf utils: Null terminate buf in read_ftrace_printk()Tommi Rantala1-1/+3
Ensure that the string that we read from the data file is null terminated. Valgrind was complaining: ==31357== Invalid read of size 1 ==31357== at 0x4EC8C1: __strtok_r_1c (string2.h:200) ==31357== by 0x4EC8C1: parse_ftrace_printk (trace-event-parse.c:161) ==31357== by 0x4F82A8: read_ftrace_printk (trace-event-read.c:204) ==31357== by 0x4F82A8: trace_report (trace-event-read.c:468) ==31357== by 0x4CD552: process_tracing_data (header.c:1576) ==31357== by 0x4D3397: perf_file_section__process (header.c:2705) ==31357== by 0x4D3397: perf_header__process_sections (header.c:2488) ==31357== by 0x4D3397: perf_session__read_header (header.c:2925) ==31357== by 0x4E71E2: perf_session__open (session.c:32) ==31357== by 0x4E71E2: perf_session__new (session.c:139) ==31357== by 0x429F5D: cmd_annotate (builtin-annotate.c:472) ==31357== by 0x497150: run_builtin (perf.c:359) ==31357== by 0x428CE0: handle_internal_command (perf.c:421) ==31357== by 0x428CE0: run_argv (perf.c:467) ==31357== by 0x428CE0: main (perf.c:614) ==31357== Address 0x8ac0efb is 0 bytes after a block of size 1,963 alloc'd ==31357== at 0x4C2DB9D: malloc (vg_replace_malloc.c:299) ==31357== by 0x4F827B: read_ftrace_printk (trace-event-read.c:195) ==31357== by 0x4F827B: trace_report (trace-event-read.c:468) ==31357== by 0x4CD552: process_tracing_data (header.c:1576) ==31357== by 0x4D3397: perf_file_section__process (header.c:2705) ==31357== by 0x4D3397: perf_header__process_sections (header.c:2488) ==31357== by 0x4D3397: perf_session__read_header (header.c:2925) ==31357== by 0x4E71E2: perf_session__open (session.c:32) ==31357== by 0x4E71E2: perf_session__new (session.c:139) ==31357== by 0x429F5D: cmd_annotate (builtin-annotate.c:472) ==31357== by 0x497150: run_builtin (perf.c:359) ==31357== by 0x428CE0: handle_internal_command (perf.c:421) ==31357== by 0x428CE0: run_argv (perf.c:467) ==31357== by 0x428CE0: main (perf.c:614) Signed-off-by: Tommi Rantala <[email protected]> Cc: Alexander Shishkin <[email protected]> Cc: Peter Zijlstra <[email protected]> Link: http://lkml.kernel.org/r/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2017-03-27perf utils: use sizeof(buf) - 1 in readlink() callTommi Rantala1-1/+1
Ensure that we have space for the null byte in buf. Signed-off-by: Tommi Rantala <[email protected]> Cc: Alexander Shishkin <[email protected]> Cc: Peter Zijlstra <[email protected]> Link: http://lkml.kernel.org/r/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2017-03-27perf tests: Do not assume that readlink() returns a null terminated stringTommi Rantala1-1/+1
Ensure that the string in buf is null terminated. Signed-off-by: Tommi Rantala <[email protected]> Cc: Alexander Shishkin <[email protected]> Cc: Peter Zijlstra <[email protected]> Link: http://lkml.kernel.org/r/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2017-03-27perf buildid: Do not assume that readlink() returns a null terminated stringTommi Rantala1-1/+5
Valgrind was complaining: $ valgrind ./perf list >/dev/null ==11643== Memcheck, a memory error detector ==11643== Copyright (C) 2002-2015, and GNU GPL'd, by Julian Seward et al. ==11643== Using Valgrind-3.12.0 and LibVEX; rerun with -h for copyright info ==11643== Command: ./perf list ==11643== ==11643== Conditional jump or move depends on uninitialised value(s) ==11643== at 0x4C30620: rindex (vg_replace_strmem.c:199) ==11643== by 0x49DAA9: build_id_cache__origname (build-id.c:198) ==11643== by 0x49E1C7: build_id_cache__valid_id (build-id.c:222) ==11643== by 0x49E1C7: build_id_cache__list_all (build-id.c:507) ==11643== by 0x4B9C8F: print_sdt_events (parse-events.c:2067) ==11643== by 0x4BB0B3: print_events (parse-events.c:2313) ==11643== by 0x439501: cmd_list (builtin-list.c:53) ==11643== by 0x497150: run_builtin (perf.c:359) ==11643== by 0x428CE0: handle_internal_command (perf.c:421) ==11643== by 0x428CE0: run_argv (perf.c:467) ==11643== by 0x428CE0: main (perf.c:614) [...] Additionally, a zero length result from readlink() is not very interesting. Signed-off-by: Tommi Rantala <[email protected]> Cc: Alexander Shishkin <[email protected]> Cc: Peter Zijlstra <[email protected]> Link: http://lkml.kernel.org/r/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2017-03-27perf buildid: Do not update SDT cache with null filenameTommi Rantala1-1/+1
Valgrind was complaining: ==2633== Syscall param open(filename) points to unaddressable byte(s) ==2633== at 0x5281CC0: __open_nocancel (syscall-template.S:84) ==2633== by 0x537D38: open (fcntl2.h:53) ==2633== by 0x537D38: get_sdt_note_list (symbol-elf.c:2017) ==2633== by 0x5396FD: probe_cache__scan_sdt (probe-file.c:700) ==2633== by 0x49EA2C: build_id_cache__add_sdt_cache (build-id.c:625) ==2633== by 0x49EA2C: build_id_cache__add_s (build-id.c:697) ==2633== by 0x49EE72: build_id_cache__add_b (build-id.c:717) ==2633== by 0x49EE72: dso__cache_build_id (build-id.c:782) ==2633== by 0x49F190: __dsos__cache_build_ids (build-id.c:793) ==2633== by 0x49F190: machine__cache_build_ids (build-id.c:801) ==2633== by 0x49F190: perf_session__cache_build_ids (build-id.c:815) ==2633== by 0x4CD4F2: write_build_id (header.c:165) ==2633== by 0x4D26F7: do_write_feat (header.c:2296) ==2633== by 0x4D26F7: perf_header__adds_write (header.c:2335) ==2633== by 0x4D26F7: perf_session__write_header (header.c:2414) ==2633== by 0x43B324: __cmd_record (builtin-record.c:1154) ==2633== by 0x43B324: cmd_record (builtin-record.c:1839) ==2633== by 0x455A07: __cmd_record (builtin-kmem.c:1868) ==2633== by 0x455A07: cmd_kmem (builtin-kmem.c:1944) ==2633== by 0x497150: run_builtin (perf.c:359) ==2633== by 0x428CE0: handle_internal_command (perf.c:421) ==2633== by 0x428CE0: run_argv (perf.c:467) ==2633== by 0x428CE0: main (perf.c:614) ==2633== Address 0x0 is not stack'd, malloc'd or (recently) free'd Signed-off-by: Tommi Rantala <[email protected]> Cc: Alexander Shishkin <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: Tommi Rantala <[email protected]> Link: http://lkml.kernel.org/r/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2017-03-27perf annotate: Fix a bug of division by zero when calculating percentTaeung Song1-3/+7
Currently perf-annotate with --print-line can print -nan(0x8000000000000) because of division by zero when calculating percent. The division by zero happens when a sum of samples is zero in symbol__get_source_line(), so fix it. For example: After running 'perf record' like below, $ perf record -e "{cycles,page-faults,branch-misses}" ./a.out Before: $ perf annotate --stdio -l Sorted summary for file /home/taeung/workspace/a.out ---------------------------------------------- 32.89 -nan 7.04 a.c:38 25.14 -nan 0.00 a.c:34 16.26 -nan 56.34 a.c:31 15.88 -nan 1.41 a.c:37 5.67 -nan 0.00 a.c:39 1.13 -nan 35.21 a.c:26 0.95 -nan 0.00 a.c:44 0.57 -nan 0.00 a.c:32 Percent | Source code & Disassembly of a.out for cycles (529 samples) ----------------------------------------------------------------------------------------- : ... a.c:26 0.57 -nan 4.23 : 40081a: mov %edi,-0x24(%rbp) a.c:26 0.00 -nan 9.86 : 40081d: mov %rsi,-0x30(%rbp) ... However, if a sum of samples is zero (e.g. 'page-faults'), skip calculating percent. After: $ perf annotate --stdio -l Sorted summary for file /home/taeung/workspace/a.out ---------------------------------------------- 32.89 0.00 7.04 a.c:38 25.14 0.00 0.00 a.c:34 16.26 0.00 56.34 a.c:31 15.88 0.00 1.41 a.c:37 5.67 0.00 0.00 a.c:39 1.13 0.00 35.21 a.c:26 0.95 0.00 0.00 a.c:44 0.57 0.00 0.00 a.c:32 Percent | Source code & Disassembly of old for cycles (529 samples) ----------------------------------------------------------------------------------------- : ... a.c:26 0.57 0.00 4.23 : 40081a: mov %edi,-0x24(%rbp) a.c:26 0.00 0.00 9.86 : 40081d: mov %rsi,-0x30(%rbp) ... Signed-off-by: Taeung Song <[email protected]> Tested-by: Arnaldo Carvalho de Melo <[email protected]> Cc: Jiri Olsa <[email protected]> Cc: Masami Hiramatsu <[email protected]> Cc: Namhyung Kim <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: Wang Nan <[email protected]> Link: http://lkml.kernel.org/r/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2017-03-27perf annotate: Fix a bug following symbolic link of a build-id fileTaeung Song1-1/+9
It is wrong way to read link name from a build-id file. Because a build-id file is not anymore a symbolic link but build-id directory of it is symbolic link, so fix it. For example, if build-id file name gotten from dso__build_id_filename() is as below, /root/.debug/.build-id/4f/75c7d197c951659d1c1b8b5fd49bcdf8f3f8b1/elf To correctly read link name of build-id, use the build-id dir path that is a symbolic link, instead of the above build-id file name like below. /root/.debug/.build-id/4f/75c7d197c951659d1c1b8b5fd49bcdf8f3f8b1 Signed-off-by: Taeung Song <[email protected]> Cc: Jiri Olsa <[email protected]> Cc: Masami Hiramatsu <[email protected]> Cc: Namhyung Kim <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: Wang Nan <[email protected]> Link: http://lkml.kernel.org/r/[email protected] Fixes: 01412261d994 ("perf buildid-cache: Use path/to/bin/buildid/elf instead of path/to/bin/buildid") Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
Powered by cgit, Gruvboxed by Blaster4385.