| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
'struct target' is declared twice. One has been declared at 21st line.
Remove the duplicate.
Signed-off-by: Wan Jiabing <[email protected]>
Acked-by: Namhyung Kim <[email protected]>
Cc: Adrian Hunter <[email protected]>
Cc: Alexander Shishkin <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Mark Rutland <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: [email protected]
Link: http://lore.kernel.org/lkml/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
When the compiler emits: "CALL __x86_indirect_thunk_\reg" for an
indirect call, have objtool rewrite it to:
ALTERNATIVE "call __x86_indirect_thunk_\reg",
"call *%reg", ALT_NOT(X86_FEATURE_RETPOLINE)
Additionally, in order to not emit endless identical
.altinst_replacement chunks, use a global symbol for them, see
__x86_indirect_alt_*.
This also avoids objtool from having to do code generation.
Signed-off-by: Peter Zijlstra (Intel) <[email protected]>
Signed-off-by: Borislav Petkov <[email protected]>
Signed-off-by: Ingo Molnar <[email protected]>
Reviewed-by: Miroslav Benes <[email protected]>
Link: https://lkml.kernel.org/r/[email protected]
|
|
When the .altinstr_replacement is a retpoline, skip the alternative.
We already special case retpolines anyway.
Signed-off-by: Peter Zijlstra (Intel) <[email protected]>
Signed-off-by: Borislav Petkov <[email protected]>
Signed-off-by: Ingo Molnar <[email protected]>
Reviewed-by: Miroslav Benes <[email protected]>
Link: https://lkml.kernel.org/r/[email protected]
|
|
Track the reloc of instructions in the new instruction->reloc field
to avoid having to look them up again later.
( Technically x86 instructions can have two relocations, but not jumps
and calls, for which we're using this. )
Signed-off-by: Peter Zijlstra (Intel) <[email protected]>
Signed-off-by: Borislav Petkov <[email protected]>
Signed-off-by: Ingo Molnar <[email protected]>
Reviewed-by: Miroslav Benes <[email protected]>
Link: https://lkml.kernel.org/r/[email protected]
|
|
Provide infrastructure for architectures to rewrite/augment compiler
generated retpoline calls. Similar to what we do for static_call()s,
keep track of the instructions that are retpoline calls.
Use the same list_head, since a retpoline call cannot also be a
static_call.
Signed-off-by: Peter Zijlstra (Intel) <[email protected]>
Signed-off-by: Borislav Petkov <[email protected]>
Signed-off-by: Ingo Molnar <[email protected]>
Reviewed-by: Miroslav Benes <[email protected]>
Link: https://lkml.kernel.org/r/[email protected]
|
|
Allow objtool to create undefined symbols; this allows creating
relocations to symbols not currently in the symbol table.
Signed-off-by: Peter Zijlstra (Intel) <[email protected]>
Signed-off-by: Borislav Petkov <[email protected]>
Signed-off-by: Ingo Molnar <[email protected]>
Reviewed-by: Miroslav Benes <[email protected]>
Link: https://lkml.kernel.org/r/[email protected]
|
|
Create a common helper to add symbols.
Signed-off-by: Peter Zijlstra (Intel) <[email protected]>
Signed-off-by: Borislav Petkov <[email protected]>
Signed-off-by: Ingo Molnar <[email protected]>
Reviewed-by: Miroslav Benes <[email protected]>
Link: https://lkml.kernel.org/r/[email protected]
|
|
Create a common helper to append strings to a strtab.
Signed-off-by: Peter Zijlstra (Intel) <[email protected]>
Signed-off-by: Borislav Petkov <[email protected]>
Signed-off-by: Ingo Molnar <[email protected]>
Reviewed-by: Miroslav Benes <[email protected]>
Link: https://lkml.kernel.org/r/[email protected]
|
|
Have elf_add_reloc() create the relocation section implicitly.
Suggested-by: Josh Poimboeuf <[email protected]>
Signed-off-by: Peter Zijlstra (Intel) <[email protected]>
Signed-off-by: Borislav Petkov <[email protected]>
Signed-off-by: Ingo Molnar <[email protected]>
Reviewed-by: Miroslav Benes <[email protected]>
Link: https://lkml.kernel.org/r/[email protected]
|
|
We have 4 instances of adding a relocation. Create a common helper
to avoid growing even more.
Signed-off-by: Peter Zijlstra (Intel) <[email protected]>
Signed-off-by: Borislav Petkov <[email protected]>
Signed-off-by: Ingo Molnar <[email protected]>
Reviewed-by: Miroslav Benes <[email protected]>
Link: https://lkml.kernel.org/r/[email protected]
|
|
Instead of manually calling elf_rebuild_reloc_section() on sections
we've called elf_add_reloc() on, have elf_write() DTRT.
This makes it easier to add random relocations in places without
carefully tracking when we're done and need to flush what section.
Signed-off-by: Peter Zijlstra (Intel) <[email protected]>
Signed-off-by: Borislav Petkov <[email protected]>
Signed-off-by: Ingo Molnar <[email protected]>
Reviewed-by: Miroslav Benes <[email protected]>
Link: https://lkml.kernel.org/r/[email protected]
|
|
Currently, objtool generates tail call entries in add_jump_destination()
but waits until validate_branch() to generate the regular call entries.
Move these to add_call_destination() for consistency.
Signed-off-by: Peter Zijlstra (Intel) <[email protected]>
Signed-off-by: Borislav Petkov <[email protected]>
Signed-off-by: Ingo Molnar <[email protected]>
Reviewed-by: Miroslav Benes <[email protected]>
Link: https://lkml.kernel.org/r/[email protected]
|
|
The __x86_indirect_ naming is obviously not generic. Shorten to allow
matching some additional magic names later.
Signed-off-by: Peter Zijlstra (Intel) <[email protected]>
Signed-off-by: Borislav Petkov <[email protected]>
Signed-off-by: Ingo Molnar <[email protected]>
Reviewed-by: Miroslav Benes <[email protected]>
Link: https://lkml.kernel.org/r/[email protected]
|
|
Just like JMP handling, convert a direct CALL to a retpoline thunk
into a retpoline safe indirect CALL.
Signed-off-by: Peter Zijlstra (Intel) <[email protected]>
Signed-off-by: Borislav Petkov <[email protected]>
Signed-off-by: Ingo Molnar <[email protected]>
Reviewed-by: Miroslav Benes <[email protected]>
Link: https://lkml.kernel.org/r/[email protected]
|
|
Due to:
c9c324dc22aa ("objtool: Support stack layout changes in alternatives")
it is now possible to simplify the retpolines.
Currently our retpolines consist of 2 symbols:
- __x86_indirect_thunk_\reg: the compiler target
- __x86_retpoline_\reg: the actual retpoline.
Both are consecutive in code and aligned such that for any one register
they both live in the same cacheline:
0000000000000000 <__x86_indirect_thunk_rax>:
0: ff e0 jmpq *%rax
2: 90 nop
3: 90 nop
4: 90 nop
0000000000000005 <__x86_retpoline_rax>:
5: e8 07 00 00 00 callq 11 <__x86_retpoline_rax+0xc>
a: f3 90 pause
c: 0f ae e8 lfence
f: eb f9 jmp a <__x86_retpoline_rax+0x5>
11: 48 89 04 24 mov %rax,(%rsp)
15: c3 retq
16: 66 2e 0f 1f 84 00 00 00 00 00 nopw %cs:0x0(%rax,%rax,1)
The thunk is an alternative_2, where one option is a JMP to the
retpoline. This was done so that objtool didn't need to deal with
alternatives with stack ops. But that problem has been solved, so now
it is possible to fold the entire retpoline into the alternative to
simplify and consolidate unused bytes:
0000000000000000 <__x86_indirect_thunk_rax>:
0: ff e0 jmpq *%rax
2: 90 nop
3: 90 nop
4: 90 nop
5: 90 nop
6: 90 nop
7: 90 nop
8: 90 nop
9: 90 nop
a: 90 nop
b: 90 nop
c: 90 nop
d: 90 nop
e: 90 nop
f: 90 nop
10: 90 nop
11: 66 66 2e 0f 1f 84 00 00 00 00 00 data16 nopw %cs:0x0(%rax,%rax,1)
1c: 0f 1f 40 00 nopl 0x0(%rax)
Notice that since the longest alternative sequence is now:
0: e8 07 00 00 00 callq c <.altinstr_replacement+0xc>
5: f3 90 pause
7: 0f ae e8 lfence
a: eb f9 jmp 5 <.altinstr_replacement+0x5>
c: 48 89 04 24 mov %rax,(%rsp)
10: c3 retq
17 bytes, we have 15 bytes NOP at the end of our 32 byte slot. (IOW, if
we can shrink the retpoline by 1 byte we can pack it more densely).
[ bp: Massage commit message. ]
Signed-off-by: Peter Zijlstra (Intel) <[email protected]>
Signed-off-by: Borislav Petkov <[email protected]>
Signed-off-by: Ingo Molnar <[email protected]>
Link: https://lkml.kernel.org/r/[email protected]
|
|
Currently, optimize_nops() scans to see if the alternative starts with
NOPs. However, the emit pattern is:
141: \oldinstr
142: .skip (len-(142b-141b)), 0x90
That is, when 'oldinstr' is short, the tail is padded with NOPs. This case
never gets optimized.
Rewrite optimize_nops() to replace any trailing string of NOPs inside
the alternative to larger NOPs. Also run it irrespective of patching,
replacing NOPs in both the original and replaced code.
A direct consequence is that 'padlen' becomes superfluous, so remove it.
[ bp:
- Adjust commit message
- remove a stale comment about needing to pad
- add a comment in optimize_nops()
- exit early if the NOP verif. loop catches a mismatch - function
should not not add NOPs in that case
- fix the "optimized NOPs" offsets output ]
Signed-off-by: Peter Zijlstra (Intel) <[email protected]>
Signed-off-by: Borislav Petkov <[email protected]>
Signed-off-by: Ingo Molnar <[email protected]>
Link: https://lkml.kernel.org/r/[email protected]
|
|
a semantic conflict
Conflict-merge this main commit in essence:
a89dfde3dc3c: ("x86: Remove dynamic NOP selection")
With this upstream commit:
b90829704780: ("bpf: Use NOP_ATOMIC5 instead of emit_nops(&prog, 5) for BPF_TRAMP_F_CALL_ORIG")
Semantic merge conflict:
arch/x86/net/bpf_jit_comp.c
- memcpy(prog, ideal_nops[NOP_ATOMIC5], X86_PATCH_SIZE);
+ memcpy(prog, x86_nops[5], X86_PATCH_SIZE);
Signed-off-by: Ingo Molnar <[email protected]>
|
|
In particular we want to have this upstream commit:
b90829704780: ("bpf: Use NOP_ATOMIC5 instead of emit_nops(&prog, 5) for BPF_TRAMP_F_CALL_ORIG")
... before merging in x86/cpu changes and the removal of the NOP optimizations, and
applying PeterZ's !retpoline objtool series.
Signed-off-by: Ingo Molnar <[email protected]>
|
|
Prior to this commit xsk_socket__create(_shared) always attempted to create
the rx and tx rings for the socket. However this causes an issue when the
socket being setup is that which shares the fd with the UMEM. If a
previous call to this function failed with this socket after the rings were
set up, a subsequent call would always fail because the rings are not torn
down after the first call and when we try to set them up again we encounter
an error because they already exist. Solve this by remembering whether the
rings were set up by introducing new bools to struct xsk_umem which
represent the ring setup status and using them to determine whether or
not to set up the rings.
Fixes: 1cad07884239 ("libbpf: add support for using AF_XDP sockets")
Signed-off-by: Ciara Loftus <[email protected]>
Signed-off-by: Alexei Starovoitov <[email protected]>
Link: https://lore.kernel.org/bpf/[email protected]
|
|
If the call to xsk_socket__create fails, the user may want to retry the
socket creation using the same umem. Ensure that the umem is in the
same state on exit if the call fails by:
1. ensuring the umem _save pointers are unmodified.
2. not unmapping the set of umem rings that were set up with the umem
during xsk_umem__create, since those maps existed before the call to
xsk_socket__create and should remain in tact even in the event of
failure.
Fixes: 2f6324a3937f ("libbpf: Support shared umems between queues and devices")
Signed-off-by: Ciara Loftus <[email protected]>
Signed-off-by: Alexei Starovoitov <[email protected]>
Link: https://lore.kernel.org/bpf/[email protected]
|
|
Calls to xsk_socket__create dereference the umem to access the
fill_save and comp_save pointers. Make sure the umem is non-NULL
before doing this.
Fixes: 2f6324a3937f ("libbpf: Support shared umems between queues and devices")
Signed-off-by: Ciara Loftus <[email protected]>
Signed-off-by: Alexei Starovoitov <[email protected]>
Acked-by: Magnus Karlsson <[email protected]>
Link: https://lore.kernel.org/bpf/[email protected]
|
|
Pull kvm fixes from Paolo Bonzini:
"It's a bit larger than I (and probably you) would like by the time we
get to -rc6, but perhaps not entirely unexpected since the changes in
the last merge window were larger than usual.
x86:
- Fixes for missing TLB flushes with TDP MMU
- Fixes for race conditions in nested SVM
- Fixes for lockdep splat with Xen emulation
- Fix for kvmclock underflow
- Fix srcdir != builddir builds
- Other small cleanups
ARM:
- Fix GICv3 MMIO compatibility probing
- Prevent guests from using the ARMv8.4 self-hosted tracing
extension"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
selftests: kvm: Check that TSC page value is small after KVM_SET_CLOCK(0)
KVM: x86: Prevent 'hv_clock->system_time' from going negative in kvm_guest_time_update()
KVM: x86: disable interrupts while pvclock_gtod_sync_lock is taken
KVM: x86: reduce pvclock_gtod_sync_lock critical sections
KVM: SVM: ensure that EFER.SVME is set when running nested guest or on nested vmexit
KVM: SVM: load control fields from VMCB12 before checking them
KVM: x86/mmu: Don't allow TDP MMU to yield when recovering NX pages
KVM: x86/mmu: Ensure TLBs are flushed for TDP MMU during NX zapping
KVM: x86/mmu: Ensure TLBs are flushed when yielding during GFN range zap
KVM: make: Fix out-of-source module builds
selftests: kvm: make hardware_disable_test less verbose
KVM: x86/vPMU: Forbid writing to MSR_F15H_PERF MSRs when guest doesn't have X86_FEATURE_PERFCTR_CORE
KVM: x86: remove unused declaration of kvm_write_tsc()
KVM: clean up the unused argument
tools/kvm_stat: Add restart delay
KVM: arm64: Fix CPU interface MMIO compatibility detection
KVM: arm64: Disable guest access to trace filter controls
KVM: arm64: Hide system instruction access to Trace registers
|
|
This adds a test case to ensure BPF_SK_SKB_VERDICT and
BPF_SK_STREAM_VERDICT will never be attached at the same time.
Signed-off-by: Cong Wang <[email protected]>
Signed-off-by: Alexei Starovoitov <[email protected]>
Link: https://lore.kernel.org/bpf/[email protected]
|
|
Add a test case to ensure redirection between two UDP sockets work.
Signed-off-by: Cong Wang <[email protected]>
Signed-off-by: Alexei Starovoitov <[email protected]>
Link: https://lore.kernel.org/bpf/[email protected]
|
|
Reusing BPF_SK_SKB_STREAM_VERDICT is possible but its name is
confusing and more importantly we still want to distinguish them
from user-space. So we can just reuse the stream verdict code but
introduce a new type of eBPF program, skb_verdict. Users are not
allowed to attach stream_verdict and skb_verdict programs to the
same map.
Signed-off-by: Cong Wang <[email protected]>
Signed-off-by: Alexei Starovoitov <[email protected]>
Acked-by: John Fastabend <[email protected]>
Link: https://lore.kernel.org/bpf/[email protected]
|
|
Instead of just reporting an assertion failure, report enough information
that we can start diagnosing exactly went wrong.
Signed-off-by: Matthew Wilcox (Oracle) <[email protected]>
|
|
The throbber could race with creation of the anchor entry and cause the
IDR to have zero entries in it, which would cause the test to fail.
Signed-off-by: Matthew Wilcox (Oracle) <[email protected]>
|
|
When run on a single CPU, this test would frequently access already-freed
memory. Due to timing, this bug never showed up on multi-CPU tests.
Reported-by: Chris von Recklinghausen <[email protected]>
Signed-off-by: Matthew Wilcox (Oracle) <[email protected]>
|
|
Several test runners register individual worker threads with the
RCU library, but neglect to register the main thread, which can lead
to objects being freed while the main thread is in what appears to be
an RCU critical section.
Reported-by: Chris von Recklinghausen <[email protected]>
Signed-off-by: Matthew Wilcox (Oracle) <[email protected]>
|
|
Add a test for the issue when KVM_SET_CLOCK(0) call could cause
TSC page value to go very big because of a signedness issue around
hv_clock->system_time.
Signed-off-by: Vitaly Kuznetsov <[email protected]>
Message-Id: <[email protected]>
Signed-off-by: Paolo Bonzini <[email protected]>
|
|
SO_TXTIME hardware offload requires testing across devices, either
between machines or separate network namespaces.
Split up SO_TXTIME test into tx and rx modes, so traffic can be
sent from one process to another. Create a veth-pair on different
namespaces and bind each process to an end point via [-S]ource and
[-D]estination parameters. Optional start [-t]ime parameter can be
passed to synchronize the test across the hosts (with synchorinzed
clocks).
Signed-off-by: Carlos Llamas <[email protected]>
Reviewed-by: Willem de Bruijn <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
Test FEC settings, iterate over configs.
Signed-off-by: Jakub Kicinski <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
* make eprintf static, used only in main.c
* initialize ret in eprintf
* remove unused *tmp
v3:
* remove another err (Song Liu)
v2:
* remove unused 'int err = -1'
Signed-off-by: Stanislav Fomichev <[email protected]>
Signed-off-by: Andrii Nakryiko <[email protected]>
Acked-by: Song Liu <[email protected]>
Link: https://lore.kernel.org/bpf/[email protected]
|
|
Pick up dependent changes.
Signed-off-by: Borislav Petkov <[email protected]>
|
|
Add a helper to decode kernel instructions; there's no point in
endlessly repeating those last two arguments.
Signed-off-by: Peter Zijlstra (Intel) <[email protected]>
Signed-off-by: Borislav Petkov <[email protected]>
Link: https://lkml.kernel.org/r/[email protected]
|
|
'perf annotate' supports --symbol but it's impossible to filter a C++
symbol. With --no-demangle one can filter easily by mangled function
name.
Signed-off-by: Martin Liška <[email protected]>
Link: http://lore.kernel.org/lkml/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
The newly introduced -s command line option starts an interactive shell.
If a command is specified, the shell is started after the command
finishes executing. It's useful to have a shell especially when
debugging failing tests or developing new tests.
Since the user may terminate the VM forcefully, an extra "sync" is added
after the execution of the command to persist any logs from the command
into the log file.
Signed-off-by: KP Singh <[email protected]>
Signed-off-by: Andrii Nakryiko <[email protected]>
Link: https://lore.kernel.org/bpf/[email protected]
|
|
This patch added the testcases for removing the id 0 subflow and the id 0
address.
In do_transfer, use the removing addresses number '9' for deleting the id
0 address.
Reviewed-by: Mat Martineau <[email protected]>
Signed-off-by: Geliang Tang <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
For the id 0 address, different MPTCP connections could be using
different IP addresses for id 0.
This patch added an extra argument IP address for del_addr when
using id 0.
Reviewed-by: Mat Martineau <[email protected]>
Signed-off-by: Geliang Tang <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
IDs are supposed to be between 0 and 255.
In pm_nl_ctl, for both the 'add' and 'get' instruction, the ID is casted
in a u_int8_t. So if we give 256, we will delete ID 0. Obviously, the
goal is not to delete this ID by giving 256.
We could modify pm_nl_ctl and stop if the ID is negative or higher than
255 but probably better not to increase the number of lines for such
things in this tool which is only used in selftests. Instead, we use it
within the limits.
This modification also means that we will no longer add a new ID for the
2nd entry. That's why we removed an expected entry from the dump and
introduced with
commit dc8eb10e95a8 ("selftests: mptcp: add testcases for setting the address ID").
So now we delete ID 9 like before and we add entries for IDs 10 to 255
that are deleted just after.
Note that this could be seen as a fix but it was not really an issue so
far: we were simply playing with ID 0/1 once again. With the following
commit ("selftests: mptcp: add addr argument for del_addr"), it will be
different because ID 0 is going to required an address. We don't want
errors when trying to delete ID 0 without the address argument.
Acked-and-tested-by: Geliang Tang <[email protected]>
Signed-off-by: Matthieu Baerts <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
Use act_simple to verify that action created with 'tc actions change'
command exists after command returns. The goal is to verify internal action
API reference counting to ensure that the case when netlink message has
NLM_F_REPLACE flag set but action with specified index doesn't exist is
handled correctly.
Signed-off-by: Vlad Buslov <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
Create a bunch of virtual topologies and verify that
NETIF_F_GRO_FRAGLIST or NETIF_F_GRO_UDP_FWD-enabled
devices aggregate the ingress packets as expected.
Additionally check that the aggregate packets are
segmented correctly when landing on a socket
Also test SKB_GSO_FRAGLIST and SKB_GSO_UDP_L4 aggregation
on top of UDP tunnel (vxlan)
v1 -> v2:
- hopefully clarify the commit message
- moved the overlay network ipv6 range into the 'documentation'
reserved range (Willem)
Signed-off-by: Paolo Abeni <[email protected]>
Acked-by: Willem de Bruijn <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
Commit 4bba4c4bb09a added tools/include/linux/compiler_types.h which
includes linux/compiler-gcc.h. Unfortunately, we had our own (empty)
compiler_types.h which overrode the one added by that commit, and
so we lost the definition of __must_be_array(). Removing our empty
compiler_types.h fixes the problem and reduces our divergence from the
rest of the tools.
Signed-off-by: Matthew Wilcox (Oracle) <[email protected]>
|
|
hardware_disable_test produces 512 snippets like
...
main: [511] waiting semaphore
run_test: [511] start vcpus
run_test: [511] all threads launched
main: [511] waiting 368us
main: [511] killing child
and this doesn't have much value, let's print this info with pr_debug().
Signed-off-by: Vitaly Kuznetsov <[email protected]>
Message-Id: <[email protected]>
Signed-off-by: Paolo Bonzini <[email protected]>
|
|
If this service is enabled and the system rebooted, Systemd's initial
attempt to start this unit file may fail in case the kvm module is not
loaded. Since we did not specify a delay for the retries, Systemd
restarts with a minimum delay a number of times before giving up and
disabling the service. Which means a subsequent kvm module load will
have kvm running without monitoring.
Adding a delay to fix this.
Signed-off-by: Stefan Raspl <[email protected]>
Message-Id: <[email protected]>
Signed-off-by: Paolo Bonzini <[email protected]>
|
|
Remove two unused defines.
Signed-off-by: Björn Töpel <[email protected]>
Signed-off-by: Alexei Starovoitov <[email protected]>
Link: https://lore.kernel.org/bpf/[email protected]
|
|
The usage of the condition variable is broken, and overkill. Replace it
with a pthread barrier.
Signed-off-by: Björn Töpel <[email protected]>
Signed-off-by: Alexei Starovoitov <[email protected]>
Link: https://lore.kernel.org/bpf/[email protected]
|
|
There is really no reason to have a non-default thread stack
size. Remove that.
Signed-off-by: Björn Töpel <[email protected]>
Signed-off-by: Alexei Starovoitov <[email protected]>
Link: https://lore.kernel.org/bpf/[email protected]
|
|
Introduce a test that is supposed to verify the persistence of BPF
resources based on underlying bpf_link usage.
Test will:
1) create and bind two sockets on queue ids 0 and 1
2) run a traffic on queue ids 0
3) remove xsk sockets from queue 0 on both veth interfaces
4) run a traffic on queues ids 1
Running traffic successfully on qids 1 means that BPF resources were
not removed on step 3).
In order to make it work, change the command that creates veth pair to
have the 4 queue pairs by default.
Introduce the arrays of xsks and umems to ifobject struct but keep a
pointers to single entities, so rest of the logic around Rx/Tx can be
kept as-is.
For umem handling, double the size of mmapped space and split that
between the two sockets.
Rename also bidi_pass to a variable 'second_step' of a boolean type as
it's now used also for the test that is introduced here and it doesn't
have anything in common with bi-directional testing.
Drop opt_queue command line argument as it wasn't working before anyway.
Signed-off-by: Maciej Fijalkowski <[email protected]>
Signed-off-by: Alexei Starovoitov <[email protected]>
Link: https://lore.kernel.org/bpf/[email protected]
|
|
Although thread_common_ops() are called in both Tx and Rx threads,
testapp_validate() will not spawn Tx thread until Rx thread signals that
it has finished its initialization via condition variable.
Therefore, locking in thread_common_ops is not needed and furthermore Tx
thread does not have to spin on atomic variable.
Note that this simplification wouldn't be possible if there would still
be a common worker thread.
Signed-off-by: Maciej Fijalkowski <[email protected]>
Signed-off-by: Alexei Starovoitov <[email protected]>
Link: https://lore.kernel.org/bpf/[email protected]
|