aboutsummaryrefslogtreecommitdiff
path: root/tools
AgeCommit message (Collapse)AuthorFilesLines
2018-03-09arch: remove frv portArnd Bergmann2-9/+0
The Fujitsu FRV kernel port has been around for a long time, but has not seen regular updates in several years and instead was marked 'Orphaned' in 2016 by long-time maintainer David Howells. The SoC product line apparently is apparently still around in the form of the Socionext Milbeaut image processor, but this one no longer uses the FRV CPU cores. This removes all FRV specific files from the kernel. Link: http://www.socionext.com/en/products/assp/milbeaut/ Cc: David Howells <[email protected]> Signed-off-by: Arnd Bergmann <[email protected]>
2018-03-09mn10300: Remove the architectureDavid Howells3-9/+1
Remove the MN10300 arch as the hardware is defunct. Suggested-by: Arnd Bergmann <[email protected]> Signed-off-by: David Howells <[email protected]> cc: Masahiro Yamada <[email protected]> cc: [email protected] Signed-off-by: Arnd Bergmann <[email protected]>
2018-03-09Merge tag 'powerpc-4.16-5' of ↵Linus Torvalds3-1/+17
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux Pull powerpc fixes from Michael Ellerman: "One notable fix to properly advertise our support for a new firmware feature, caused by two series conflicting semantically but not textually. There's a new ioctl for the new ocxl driver, which is not a fix, but needed to complete the userspace API and good to have before the driver is in a released kernel. Finally three minor selftest fixes, and a fix for intermittent build failures for some obscure platforms, caused by a missing make dependency. Thanks to: Alastair D'Silva, Bharata B Rao, Guenter Roeck" * tag 'powerpc-4.16-5' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: powerpc/pseries: Fix vector5 in ibm architecture vector table ocxl: Document the OCXL_IOCTL_GET_METADATA IOCTL ocxl: Add get_metadata IOCTL to share OCXL information to userspace selftests/powerpc: Skip the subpage_prot tests if the syscall is unavailable selftests/powerpc: Fix missing clean of pmu/lib.o powerpc/boot: Fix random libfdt related build errors selftests/powerpc: Skip tm-trap if transactional memory is not enabled
2018-03-09usbip: tools: change to use new error codes in server reply messagesShuah Khan5-19/+24
Changed usbip_network, usbip_attach, usbip_list, and usbipd to use and propagate the new error codes in server reply messages. usbip_net_recv_op_common() is changed to take a pointer to status return the status returned in the op_common.status to callers. usbip_attach and usbip_list use the common interface to print error messages to indicate why the request failed. With this change the messages say why a request failed: - when a client requests a device that is already exported: usbip attach -r server_name -b 3-10.2 usbip: error: Attach Request for 3-10.2 failed - Device busy (exported) - when a client requests a device that isn't exportable, usbip attach -r server_name -b 3-10.4 usbip: error: Attach Request for 3-10.4 failed - Device not found Signed-off-by: Shuah Khan <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
2018-03-09usbip: usbip_host_common: Use new error codes to return request statusShuah Khan1-1/+4
Currently ST_OK and ST_NA are the only values used to communicate status of a request from a client. Use new error codes to clearly indicate what failed. For example, when client sends request to import a device that isn't export-able, send ST_DEV_BUSY to the client. Signed-off-by: Shuah Khan <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
2018-03-09usbip: tools: add more error codes for usbip request/reply messagesShuah Khan3-3/+35
Currently ST_OK and ST_NA are the only values defined to communicate status of a request from a client. Add more error codes to clearly indicate what failed. For example, when client sends request to import a device that isn't export-able, server can send a specific error code to the client. Existing defines are moved to a common header in libsrc to be included in the libusbip_la-usbip_common.o to be used by all the usbip tools. Supporting interface to print error strings is added to the common lib. Signed-off-by: Shuah Khan <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
2018-03-09usbip: tools usbip_network: Fix cryptic error messagesShuah Khan1-2/+2
Kernel and tool version mismatch message is cryptic. Fix it to be informative. Signed-off-by: Shuah Khan <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
2018-03-09usbip: tools usbip_attach: Fix cryptic error messagesShuah Khan1-1/+2
Attach device error message is cryptic and useless. Fix it to be informative. Signed-off-by: Shuah Khan <[email protected]> Reviewed-by: Krzysztof Opasiak <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
2018-03-09tools: tc-testing: Can pause just before post-suiteBrenda J. Butler1-0/+9
With option -P, the test script will pause just before the post_suite functions are called. This allows the tester to inspect the system before it is torn down. Signed-off-by: Brenda J. Butler <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2018-03-09tools: tc-testing: Can refer to $TESTID in test specBrenda J. Butler1-0/+6
When processing the commands in the test cases, substitute the test id for $TESTID. This helps to make more flexible tests. For example, the testid can be given as a command line argument. As an example, if we wish to save the test output to a file named for the test case, we can write in the test case: "cmdUnderTest": "some test command | tee -a $TESTID.out" Signed-off-by: Brenda J. Butler <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2018-03-09tc-testing: add csum testsRoman Mashak1-0/+410
Signed-off-by: Roman Mashak <[email protected]> Tested-by: Davide Caratti <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2018-03-09tools: bpf: silence make by not deleting intermediate fileJiri Benc1-1/+1
Even in quiet mode, make finishes with rm tools/bpf/bpf_exp.lex.c That's because it considers the file to be intermediate. Silence that by mentioning the lex.c file instead of the lex.o file; the dependency still stays. Signed-off-by: Jiri Benc <[email protected]> Signed-off-by: Daniel Borkmann <[email protected]>
2018-03-09tools: bpf: respect quiet/verbose buildJiri Benc1-11/+27
Default to quiet build, with V=1 enabling verbose build as is usual. Signed-off-by: Jiri Benc <[email protected]> Signed-off-by: Daniel Borkmann <[email protected]>
2018-03-09tools: bpf: call descend in MakefileJiri Benc1-3/+3
Use the descend macro to properly propagate $(subdir) to bpftool. Signed-off-by: Jiri Benc <[email protected]> Signed-off-by: Daniel Borkmann <[email protected]>
2018-03-09tools: bpf: make install should build firstJiri Benc1-2/+4
Make the 'install' target depend on the 'all' target to build the binaries first. Signed-off-by: Jiri Benc <[email protected]> Signed-off-by: Daniel Borkmann <[email protected]>
2018-03-09tools: bpf: consistent make bpf_installJiri Benc1-4/+6
Currently, make bpf_install in tools/ does not respect DESTDIR. Moreover, it installs to /usr/bin/ unconditionally. Let it respect DESTDIR and allow prefix to be specified. Also, to be more consistent with bpftool and with the usual customs, default the prefix to /usr/local instead of /usr. Signed-off-by: Jiri Benc <[email protected]> Signed-off-by: Daniel Borkmann <[email protected]>
2018-03-09tools: bpf: respect output directory during buildJiri Benc1-16/+22
Currently, the programs under tools/bpf (with the notable exception of bpftool) do not respect the output directory (make O=dir). Fix that. Signed-off-by: Jiri Benc <[email protected]> Signed-off-by: Daniel Borkmann <[email protected]>
2018-03-09tools: bpftool: silence 'missing initializer' warningsJiri Benc1-1/+1
When building bpf tool, gcc emits piles of warnings: prog.c: In function ‘prog_fd_by_tag’: prog.c:101:9: warning: missing initializer for field ‘type’ of ‘struct bpf_prog_info’ [-Wmissing-field-initializers] struct bpf_prog_info info = {}; ^ In file included from /home/storage/jbenc/git/net-next/tools/lib/bpf/bpf.h:26:0, from prog.c:47: /home/storage/jbenc/git/net-next/tools/include/uapi/linux/bpf.h:925:8: note: ‘type’ declared here __u32 type; ^ As these warnings are not useful, switch them off. Signed-off-by: Jiri Benc <[email protected]> Signed-off-by: Daniel Borkmann <[email protected]>
2018-03-08selftests/net: enable fragments for fib-onlink-testsAnders Roxell1-0/+5
We miss CONFIG_* fragments so test fib-onlink-tests.sh can do: ip li add lisa type vrf table 1101 ip li add veth1 type veth peer name veth2 And the follow message occurs if it isn't enabled: Configuring interfaces RTNETLINK answers: Operation not supported This enables for NET_NRF (and friends) and VETH so we can create a vrf table and veth. Fixes: 153e1b84f477 ("selftests: Add FIB onlink tests") Signed-off-by: Anders Roxell <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2018-03-08perf tools: Update quipper informationStephane Eranian1-6/+1
This patch updates the links to the Quipper library. It is now available from GitHub and has been updated. Reported-by: Lakshman Annadorai <[email protected]> Signed-off-by: Stephane Eranian <[email protected]> Cc: Peter Zijlstra <[email protected]> Link: http://lkml.kernel.org/r/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2018-03-08perf annotate: Handle s390 PC relative load and store instruction.Thomas Richter1-0/+63
S390 has several load and store instructions with target operand addressing relative to the program counter, for example lrl, lgrl, strl, stgrl. These instructions are handled similar to x86. Objdump output displays those instructions as: 9595c: c4 2d 00 09 9c 54 lgrl %r7,1c8540 <mp_+0x60> This output is parsed (like on x86) and perf annotate shows those lines as: lgrl %r7,mp_+0x60 This patch handles the s390 specific instruction parsing for PC relative load and store instructions. Signed-off-by: Thomas Richter <[email protected]> Cc: Heiko Carstens <[email protected]> Cc: Hendrik Brueckner <[email protected]> Cc: Martin Schwidefsky <[email protected]> Link: http://lkml.kernel.org/r/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2018-03-08perf annotate: Support to display the IPC/Cycle in TUI modeJin Yao1-6/+82
Unlike the perf report interactive annotate mode, the perf annotate doesn't display the IPC/Cycle even if branch info is recorded in perf data file. perf record -b ... perf annotate function It should show IPC/cycle, but it doesn't. This patch lets perf annotate support the displaying of IPC/Cycle if branch info is in perf data. For example, perf annotate compute_flag Percent│ IPC Cycle │ │ │ Disassembly of section .text: │ │ 0000000000400640 <compute_flag>: │ compute_flag(): │ volatile int count; │ static unsigned int s_randseed; │ │ __attribute__((noinline)) │ int compute_flag() │ { 22.96 │1.18 584 sub $0x8,%rsp │ int i; │ │ i = rand() % 2; 23.02 │1.18 1 → callq rand@plt │ │ return i; 27.05 │3.37 mov %eax,%edx │ } │3.37 add $0x8,%rsp │ { │ int i; │ │ i = rand() % 2; │ │ return i; │3.37 shr $0x1f,%edx │3.37 add %edx,%eax │3.37 and $0x1,%eax │3.37 sub %edx,%eax │ } 26.97 │3.37 2 ← retq Note that, this patch only supports TUI mode. For stdio, now it just keeps original behavior. Will support it in a follow-up patch. $ perf annotate compute_flag --stdio Percent | Source code & Disassembly of div for cycles:ppp (7993 samples) ------------------------------------------------------------------------------ : : : : Disassembly of section .text: : : 0000000000400640 <compute_flag>: : compute_flag(): : volatile int count; : static unsigned int s_randseed; : : __attribute__((noinline)) : int compute_flag() : { 0.29 : 400640: sub $0x8,%rsp # +100.00% : int i; : : i = rand() % 2; 42.93 : 400644: callq 400490 <rand@plt> # -100.00% (p:100.00%) : : return i; 0.10 : 400649: mov %eax,%edx # +100.00% : } 0.94 : 40064b: add $0x8,%rsp : { : int i; : : i = rand() % 2; : : return i; 27.02 : 40064f: shr $0x1f,%edx 0.15 : 400652: add %edx,%eax 1.24 : 400654: and $0x1,%eax 2.08 : 400657: sub %edx,%eax : } 25.26 : 400659: retq # -100.00% (p:100.00%) Signed-off-by: Jin Yao <[email protected]> Acked-by: Andi Kleen <[email protected]> Link: http://lkml.kernel.org/r/[email protected] Cc: Alexander Shishkin <[email protected]> Cc: Jiri Olsa <[email protected]> Cc: Peter Zijlstra <[email protected]> Link: http://lkml.kernel.org/r/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2018-03-08perf report: Provide libtraceevent with a kernel symbol resolverWang YanQing1-0/+9
So that beautifiers wanting to resolve kernel function addresses to names can do its work, and when we use "perf report" for output of "perf kmem record", we will get kernel symbol output. This patch affect the output of "perf report" for the record data generated by "perf kmem record" looks like below: Before patch: 0.01% call_site=ffffffff814e5828 ptr=0x99bb000 bytes_req=3616 bytes_alloc=4096 gfp_flags=GFP_ATOMIC 0.01% call_site=ffffffff81370b87 ptr=0x428a3060 bytes_req=32 bytes_alloc=32 gfp_flags=GFP_KERNEL|GFP_ZERO After patch: 0.01% (aa_alloc_task_context+0x27) call_site=ffffffff81370b87 ptr=0x428a3060 bytes_req=32 bytes_alloc=32 gfp_flags=GFP_KERNEL|GFP_ZERO 0.01% (__tty_buffer_request_room+0x88) call_site=ffffffff814e5828 ptr=0x99bb000 bytes_req=3616 bytes_alloc=4096 gfp_flags=GFP_ATOMIC Signed-off-by: Wang YanQing <[email protected]> Acked-by: Jiri Olsa <[email protected]> Tested-by: Arnaldo Carvalho de Melo <[email protected]> Cc: Alexander Shishkin <[email protected]> Cc: Jiri Olsa <[email protected]> Cc: Peter Zijlstra <[email protected]> Link: http://lkml.kernel.org/r/20180308032850.GA12383@udknight-ThinkPad-E550 Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2018-03-08perf build: Force llvm/clang test compile output to .make.outputJiri Olsa1-3/+6
So we can see the output of feature compile in following files: tools/build/feature/test-llvm.make.output tools/build/feature/test-llvm-version.make.output tools/build/feature/test-clang.make.output Signed-off-by: Jiri Olsa <[email protected]> Cc: Alexander Shishkin <[email protected]> Cc: David Ahern <[email protected]> Cc: Namhyung Kim <[email protected]> Cc: Peter Zijlstra <[email protected]> Link: http://lkml.kernel.org/r/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2018-03-08perf build: Add llvm/clang make targets to FILESJiri Olsa1-1/+4
So they can follow the OUTPUT variable setup as the rest of the features. Signed-off-by: Jiri Olsa <[email protected]> Cc: Alexander Shishkin <[email protected]> Cc: David Ahern <[email protected]> Cc: Namhyung Kim <[email protected]> Cc: Peter Zijlstra <[email protected]> Link: http://lkml.kernel.org/r/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2018-03-08perf build: Add llvm/clang/cxx make tests into FEATURE_TESTS_EXTRAJiri Olsa1-1/+5
So we can see the status when we build perf, like: $ make LIBCLANGLLVM=1 VF=1 ... cxx: [ on ] ... llvm: [ on ] ... llvm-version: [ on ] ... clang: [ on ] Signed-off-by: Jiri Olsa <[email protected]> Cc: Alexander Shishkin <[email protected]> Cc: David Ahern <[email protected]> Cc: Namhyung Kim <[email protected]> Cc: Peter Zijlstra <[email protected]> Link: http://lkml.kernel.org/r/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2018-03-08perf tools: Update tags with .cpp filesJiri Olsa1-3/+3
We have some .cpp files, make ctags/cscope aware of them. Signed-off-by: Jiri Olsa <[email protected]> Cc: Alexander Shishkin <[email protected]> Cc: David Ahern <[email protected]> Cc: Namhyung Kim <[email protected]> Cc: Peter Zijlstra <[email protected]> Link: http://lkml.kernel.org/r/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2018-03-08perf tools: Add MEM_TOPOLOGY feature to perf data fileJiri Olsa4-1/+316
Adding MEM_TOPOLOGY feature to perf data file, that will carry physical memory map and its node assignments. The format of data in MEM_TOPOLOGY is as follows: 0 - version | for future changes 8 - block_size_bytes | /sys/devices/system/memory/block_size_bytes 16 - count | number of nodes For each node we store map of physical indexes for each node: 32 - node id | node index 40 - size | size of bitmap 48 - bitmap | bitmap of memory indexes that belongs to node | /sys/devices/system/node/node<NODE>/memory<INDEX> The MEM_TOPOLOGY could be displayed with following report command: $ perf report --header-only -I ... # memory nodes (nr 1, block size 0x8000000): # 0 [7G]: 0-23,32-69 Signed-off-by: Jiri Olsa <[email protected]> Tested-by: Arnaldo Carvalho de Melo <[email protected]> Cc: Alexander Shishkin <[email protected]> Cc: David Ahern <[email protected]> Cc: Namhyung Kim <[email protected]> Cc: Peter Zijlstra <[email protected]> Link: http://lkml.kernel.org/r/[email protected] [ Rename 'index' to 'idx', as this breaks the build in rhel5, 6 and other systems where this is used by glibc headers ] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2018-03-08perf c2c: Use mem_info refcnt logicJiri Olsa1-13/+11
Switch to refcnt logic instead of duplicating mem_info objects. No functional change, just saving some memory. Signed-off-by: Jiri Olsa <[email protected]> Cc: Alexander Shishkin <[email protected]> Cc: David Ahern <[email protected]> Cc: Namhyung Kim <[email protected]> Cc: Peter Zijlstra <[email protected]> Link: http://lkml.kernel.org/r/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2018-03-08perf tools: Add refcnt into struct mem_infoJiri Olsa4-6/+41
It's passed along several hists entries in --hierarchy mode, so it's better we keep track of it. The current fail I see is that it gets removed in hierarchy --mem-mode mode, where it's shared in the different hierarchies, but removed from the template hist entry, so the report crashes. Signed-off-by: Jiri Olsa <[email protected]> Cc: Alexander Shishkin <[email protected]> Cc: David Ahern <[email protected]> Cc: Namhyung Kim <[email protected]> Cc: Peter Zijlstra <[email protected]> Link: http://lkml.kernel.org/r/[email protected] [ Rename mem_info__aloc() to mem_info__new(), to fix the typo and use the convention for constructors ] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2018-03-08perf record: Remove progname from struct recordJiri Olsa1-3/+0
It's no longer used. Signed-off-by: Jiri Olsa <[email protected]> Cc: Alexander Shishkin <[email protected]> Cc: David Ahern <[email protected]> Cc: Namhyung Kim <[email protected]> Cc: Peter Zijlstra <[email protected]> Link: http://lkml.kernel.org/r/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2018-03-08perf record: Move machine variable down the functionJiri Olsa1-3/+1
It's used far more down to be declared on the top of the __cmd_record. Signed-off-by: Jiri Olsa <[email protected]> Cc: Alexander Shishkin <[email protected]> Cc: David Ahern <[email protected]> Cc: Namhyung Kim <[email protected]> Cc: Peter Zijlstra <[email protected]> Link: http://lkml.kernel.org/r/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2018-03-08perf report: Display perf.data header infoJiri Olsa1-1/+6
Display more header info from perf.data file, following values: $ perf report -i perf.data --header-only ... # header version : 1 # data offset : 424 # data size : 3364280 # feat offset : 3364704 It's handy for debuging. Signed-off-by: Jiri Olsa <[email protected]> Tested-by: Arnaldo Carvalho de Melo <[email protected]> Cc: Alexander Shishkin <[email protected]> Cc: David Ahern <[email protected]> Cc: Namhyung Kim <[email protected]> Cc: Peter Zijlstra <[email protected]> Link: http://lkml.kernel.org/r/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2018-03-08perf report: Fix the output for stdio events listJiri Olsa4-9/+34
Changing the output header for reporting forced groups via --groups option on non grouped events, like: $ perf record -e 'cycles,instructions' $ perf report --stdio --group Before: # Samples: 24 of event 'anon group { cycles:u, instructions:u }' After: # Samples: 24 of events 'cycles:u, instructions:u' Signed-off-by: Jiri Olsa <[email protected]> Tested-by: Arnaldo Carvalho de Melo <[email protected]> Cc: Alexander Shishkin <[email protected]> Cc: David Ahern <[email protected]> Cc: Namhyung Kim <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: Stephane Eranian <[email protected]> Fixes: ad52b8cb4886 ("perf report: Add support to display group output for non group events") Link: http://lkml.kernel.org/r/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2018-03-08perf annotate: Fix s390 target function disassemblyThomas Richter2-2/+53
'perf annotate' displays function call assembler instructions with a right arrow. Hitting enter on this line/instruction causes the browser to disassemble this target function and show it on the screen. On s390 this results in an error message 'The called function was not found.' The function call assembly line parsing does not handle the s390 bras and brasl instructions. Function call__parse expects the target as first operand: callq e9140 <__fxstat> S390 has a register number as first operand: brasl %r14,41d60 <abort> Therefore the target addresses on s390 are always zero which is an invalid address. Introduce a s390 specific call parsing function which skips the first operand on s390. Signed-off-by: Thomas Richter <[email protected]> Cc: Heiko Carstens <[email protected]> Cc: Hendrik Brueckner <[email protected]> Cc: Martin Schwidefsky <[email protected]> Link: http://lkml.kernel.org/r/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2018-03-08perf intel-pt: Adjust overlap-checking to support sampling modeAdrian Hunter1-3/+4
Adjust overlap-checking to support sampling mode. Signed-off-by: Adrian Hunter <[email protected]> Cc: Jiri Olsa <[email protected]> Link: http://lkml.kernel.org/r/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2018-03-08perf intel-pt: Remove a check for sampling modeAdrian Hunter1-3/+0
Intel PT code already has some preparation for AUX area sampling mode. However the implementation has changed from the first proposal and one of the side-effects is that it will not be impossible to support snapshot mode and sampling mode at the same time. Although there are no plans to support it, let validation (not yet implemented) control whether it is allowed rather than low-level functions. Signed-off-by: Adrian Hunter <[email protected]> Cc: Jiri Olsa <[email protected]> Link: http://lkml.kernel.org/r/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2018-03-08perf intel-pt: Tidy old_buffer handling in intel_pt_get_trace()Adrian Hunter1-13/+11
intel_pt_get_trace() fixes overlaps between the current buffer and the previous buffer ('old_buffer'). However the previous buffer might not have had usable data (no PSB) so the comparison must be made against the previous buffer that had usable data. Tidy that by keeping a pointer for that purpose in struct intel_pt_queue. Signed-off-by: Adrian Hunter <[email protected]> Cc: Jiri Olsa <[email protected]> Link: http://lkml.kernel.org/r/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2018-03-08perf intel-pt: Get rid of intel_pt_use_buffer_pid_tid()Adrian Hunter1-36/+3
With the new way sampling support will be implemented, intel_pt_use_buffer_pid_tid() will not be needed. Get rid of it. Signed-off-by: Adrian Hunter <[email protected]> Cc: Jiri Olsa <[email protected]> Link: http://lkml.kernel.org/r/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2018-03-08perf intel-pt/bts: In auxtrace_record__init_intel() evlist is never NULLAdrian Hunter1-9/+5
Tidy auxtrace_record__init_intel() slightly by recognizing that evlist is never NULL. Signed-off-by: Adrian Hunter <[email protected]> Cc: Jiri Olsa <[email protected]> Link: http://lkml.kernel.org/r/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2018-03-08perf intel-pt: Fix timestamp following overflowAdrian Hunter1-0/+1
timestamp_insn_cnt is used to estimate the timestamp based on the number of instructions since the last known timestamp. If the estimate is not accurate enough decoding might not be correctly synchronized with side-band events causing more trace errors. However there are always timestamps following an overflow, so the estimate is not needed and can indeed result in more errors. Suppress the estimate by setting timestamp_insn_cnt to zero. Signed-off-by: Adrian Hunter <[email protected]> Cc: Jiri Olsa <[email protected]> Cc: [email protected] Link: http://lkml.kernel.org/r/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2018-03-08perf intel-pt: Fix error recovery from missing TIP packetAdrian Hunter1-0/+1
When a TIP packet is expected but there is a different packet, it is an error. However the unexpected packet might be something important like a TSC packet, so after the error, it is necessary to continue from there, rather than the next packet. That is achieved by setting pkt_step to zero. Signed-off-by: Adrian Hunter <[email protected]> Cc: Jiri Olsa <[email protected]> Cc: [email protected] Link: http://lkml.kernel.org/r/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2018-03-08perf intel-pt: Fix sync_switchAdrian Hunter1-7/+25
sync_switch is a facility to synchronize decoding more closely with the point in the kernel when the context actually switched. The flag when sync_switch is enabled was global to the decoding, whereas it is really specific to the CPU. The trace data for different CPUs is put on different queues, so add sync_switch to the intel_pt_queue structure and use that in preference to the global setting in the intel_pt structure. That fixes problems decoding one CPU's trace because sync_switch was disabled on a different CPU's queue. Signed-off-by: Adrian Hunter <[email protected]> Cc: Jiri Olsa <[email protected]> Cc: [email protected] Link: http://lkml.kernel.org/r/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2018-03-08perf intel-pt: Fix overlap detection to identify consecutive buffers correctlyAdrian Hunter3-35/+34
Overlap detection was not not updating the buffer's 'consecutive' flag. Marking buffers consecutive has the advantage that decoding begins from the start of the buffer instead of the first PSB. Fix overlap detection to identify consecutive buffers correctly. Signed-off-by: Adrian Hunter <[email protected]> Cc: Jiri Olsa <[email protected]> Cc: [email protected] Link: http://lkml.kernel.org/r/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2018-03-08perf mmap: Simplify perf_mmap__read_init()Kan Liang17-40/+18
It isn't necessary to pass the 'start', 'end' and 'overwrite' arguments to perf_mmap__read_init(). The data is stored in the struct perf_mmap. Discard the parameters. Signed-off-by: Kan Liang <[email protected]> Suggested-by: Arnaldo Carvalho de Melo <[email protected]> Acked-by: Jiri Olsa <[email protected]> Cc: Andi Kleen <[email protected]> Cc: Namhyung Kim <[email protected]> Cc: Wang Nan <[email protected]> Link: http://lkml.kernel.org/r/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2018-03-08perf mmap: Simplify perf_mmap__read_event()Kan Liang17-22/+17
It isn't necessary to pass the 'overwrite', 'start' and 'end' argument to perf_mmap__read_event(). Discard them. Signed-off-by: Kan Liang <[email protected]> Suggested-by: Arnaldo Carvalho de Melo <[email protected]> Acked-by: Jiri Olsa <[email protected]> Cc: Andi Kleen <[email protected]> Cc: Namhyung Kim <[email protected]> Cc: Wang Nan <[email protected]> Link: http://lkml.kernel.org/r/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2018-03-08perf mmap: Simplify perf_mmap__consume()Kan Liang15-18/+18
It isn't necessary to pass the 'overwrite' argument to perf_mmap__consume(). Discard it. Signed-off-by: Kan Liang <[email protected]> Suggested-by: Arnaldo Carvalho de Melo <[email protected]> Acked-by: Jiri Olsa <[email protected]> Cc: Andi Kleen <[email protected]> Cc: Namhyung Kim <[email protected]> Cc: Wang Nan <[email protected]> Link: http://lkml.kernel.org/r/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2018-03-08perf mmap: Use stored 'overwrite' in perf_mmap__consume()Kan Liang1-2/+2
The 'overwrite' is set at allocation. It will not be changed. Using it to replace the parameter of perf_mmap__consume(). The parameters will be discarded later. No functional change. Signed-off-by: Kan Liang <[email protected]> Suggested-by: Arnaldo Carvalho de Melo <[email protected]> Acked-by: Jiri Olsa <[email protected]> Cc: Andi Kleen <[email protected]> Cc: Namhyung Kim <[email protected]> Cc: Wang Nan <[email protected]> Link: http://lkml.kernel.org/r/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2018-03-08perf mmap: Use the stored data in perf_mmap__read_event()Kan Liang1-10/+8
Using the 'start', 'end' and 'overwrite' which are stored in struct perf_mmap to replace the parameters of perf_mmap__read_event(). The parameters will be discarded later. No functional change. Signed-off-by: Kan Liang <[email protected]> Suggested-by: Arnaldo Carvalho de Melo <[email protected]> Acked-by: Jiri Olsa <[email protected]> Cc: Andi Kleen <[email protected]> Cc: Namhyung Kim <[email protected]> Cc: Wang Nan <[email protected]> Link: http://lkml.kernel.org/r/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2018-03-08perf mmap: Use the stored scope data in perf_mmap__push()Kan Liang3-15/+15
Using the 'start' and 'end' which are stored in struct perf_mmap to replace the temporary 'start' and 'end'. The temporary variables will be discarded later. It doesn't need to pass 'overwrite' to perf_mmap__push(). It's stored in struct perf_mmap. Signed-off-by: Kan Liang <[email protected]> Acked-by: Jiri Olsa <[email protected]> Cc: Andi Kleen <[email protected]> Cc: Jiri Olsa <[email protected]> Cc: Namhyung Kim <[email protected]> Cc: Wang Nan <[email protected]> Link: http://lkml.kernel.org/r/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
Powered by cgit, Gruvboxed by Blaster4385.