| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
The test description is displayed with the PASS/FAIL resolution after
the test is ran. There however already is one other test described
exactly like this, which makes it unclear which of the tests passed or
failed. Make the description unique.
Signed-off-by: Petr Machata <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
Instead of installing a trap before tests run and uninstalling it after
they run, mirror_vlan.sh installs it twice due to a typo. Fix the typo.
Signed-off-by: Petr Machata <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
Add regression tests for PF_PACKET transmission using packet_snd.
The TPACKET ring interface has tests for transmission and reception.
This is an initial stab at the same for the send call based interface.
Packets are sent over loopback, then read twice. The entire packet is
read from another packet socket and compared. The packet is also
verified to arrive at a UDP socket for protocol conformance.
The test sends a packet over loopback, testing the following options
(not the full cross-product):
- SOCK_DGRAM
- SOCK_RAW
- vlan tag
- qdisc bypass
- bind() and sendto()
- virtio_net_hdr
- csum offload (NOT actual csum feature, ignored on loopback)
- gso
Besides these basic functionality tests, the test runs from a set
of bounds checks, positive and negative. Running over loopback, which
has dev->min_header_len, it cannot generate variable length hhlen.
Signed-off-by: Willem de Bruijn <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
Verify that udpgso can generate segments smaller than device mtu, down
to the extreme case of 1B gso_size.
Verify that irrespective of gso_size, udpgso restricts the number of
segments it will generate per call (UDP_MAX_SEGMENTS).
Signed-off-by: Willem de Bruijn <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
The existing msg_zerocopy test takes additional protocol arguments.
Add a variant that takes no arguments and runs all supported variants.
Call this from kselftest.
Signed-off-by: Willem de Bruijn <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
It is used in a single place, move the declaration to that function.
Cc: Adrian Hunter <[email protected]>
Cc: David Ahern <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Wang Nan <[email protected]>
Link: https://lkml.kernel.org/n/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
Use the header file util/debug.h instead of declaration of verbose
variable.
Signed-off-by: Thomas Richter <[email protected]>
Cc: Heiko Carstens <[email protected]>
Cc: Hendrik Brueckner <[email protected]>
Cc: Martin Schwidefsky <[email protected]>
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
One more step in grouping annotation options.
Cc: Adrian Hunter <[email protected]>
Cc: David Ahern <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Wang Nan <[email protected]>
Link: https://lkml.kernel.org/n/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
So that things changed in the command line may percolate to the browser
code without using globals.
Cc: Adrian Hunter <[email protected]>
Cc: David Ahern <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Wang Nan <[email protected]>
Link: https://lkml.kernel.org/n/[email protected]
[ Merged fix for NO_SLANG=1 build provided by Jiri Olsa ]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
Continuing to group annotation specific stuff into a struct.
Cc: Adrian Hunter <[email protected]>
Cc: David Ahern <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Wang Nan <[email protected]>
Link: https://lkml.kernel.org/n/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
Continuing to group annotation options in an annotation specific struct.
Cc: Adrian Hunter <[email protected]>
Cc: David Ahern <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Wang Nan <[email protected]>
Link: https://lkml.kernel.org/n/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
Now all callers to symbol__disassemble() can hand it the per-tool
annotation_options, which will allow us to remove lots of stuff
from symbol_options, the kitchen sink of perf configs, reducing its
size and getting annotation specific stuff grouped together.
Cc: Adrian Hunter <[email protected]>
Cc: David Ahern <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Wang Nan <[email protected]>
Link: https://lkml.kernel.org/n/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
No need to have "get_srcline", plain hist_entry__srcline() is enough and
shorter.
Cc: Adrian Hunter <[email protected]>
Cc: David Ahern <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Wang Nan <[email protected]>
Link: https://lkml.kernel.org/n/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
Since we have 'struct addr_map_symbol' and the srcline sort order keys
all operate on those, make the code more compact by introducing a
function that receives a pointer to such struct and expands the
arguments to map__srcline().
Cc: Adrian Hunter <[email protected]>
Cc: David Ahern <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Wang Nan <[email protected]>
Link: https://lkml.kernel.org/n/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
Replacing a common open coded sequence.
Cc: Adrian Hunter <[email protected]>
Cc: David Ahern <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Wang Nan <[email protected]>
Link: https://lkml.kernel.org/n/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
Accross all the routines, this way we can have eventually have a
consistent set of defaults for all UIs.
Cc: Adrian Hunter <[email protected]>
Cc: David Ahern <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Wang Nan <[email protected]>
Link: https://lkml.kernel.org/n/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
When we have multiple groups in an evlist, say:
$ perf stat -e '{cycles,instructions},{cache-references,cache-misses}' sleep 1
Performance counter stats for 'sleep 1':
343,134 cycles:u
249,292 instructions:u # 0.73 insn per cycle
15,556 cache-references:u
8,925 cache-misses:u # 57.373 % of all cache refs
1.000957550 seconds time elapsed
$
Then the perf_evsel instances for the two group leaders ("cycles" and
"cache-references") will have evsel->nr_members set to 2, while all the
evsel->evlist->nr_entries will be set to 4, so we can't use
evsel->evlist->nr_entries everywhere, as event groups need to be taken
into account.
But this probably requires us to audit at least the forced-group code,
where we want all of the events to be in a "group", to see them all in
the screen, one column for each, even knowing that they were not
necessarily scheduled to count at the same time by the kernel perf
subsystem.
Cc: Adrian Hunter <[email protected]>
Cc: David Ahern <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Wang Nan <[email protected]>
Link: https://lkml.kernel.org/n/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
Since over time the places where we need to pass this got reduced
because we can obtain it from evsel->evlist->nr_entries, no need to have
this global anymore.
Cc: Adrian Hunter <[email protected]>
Cc: David Ahern <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Wang Nan <[email protected]>
Link: https://lkml.kernel.org/n/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
Its a bit shorter, so ditch the old symbol__alloc_hists() function.
Cc: Adrian Hunter <[email protected]>
Cc: David Ahern <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Wang Nan <[email protected]>
Link: https://lkml.kernel.org/n/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
Since now we have evsel->evlist->nr_entries in the single place calling
this function, use it.
Cc: Adrian Hunter <[email protected]>
Cc: David Ahern <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Wang Nan <[email protected]>
Link: https://lkml.kernel.org/n/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
In this case we're wanting just notes->src->cycles_hist, allocating it if needed.
Cc: Adrian Hunter <[email protected]>
Cc: David Ahern <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Wang Nan <[email protected]>
Link: https://lkml.kernel.org/n/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
In this case we're wanting just notes->src->histograms, allocating it if needed.
Cc: Adrian Hunter <[email protected]>
Cc: David Ahern <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Wang Nan <[email protected]>
Link: https://lkml.kernel.org/n/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
It only operates on the histograms, so no need for the encompassing
'struct annotation'.
Cc: Adrian Hunter <[email protected]>
Cc: David Ahern <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Wang Nan <[email protected]>
Link: https://lkml.kernel.org/n/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
So that we can call it independently, in contexts were we know we
already have notes->src allocated.
Cc: Adrian Hunter <[email protected]>
Cc: David Ahern <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Wang Nan <[email protected]>
Link: https://lkml.kernel.org/n/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
More stuff will go in there, all the parts that are not needed when a
symbol had no samples and that were mistakenly added to 'struct
annotation'.
Cc: Adrian Hunter <[email protected]>
Cc: David Ahern <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Wang Nan <[email protected]>
Link: https://lkml.kernel.org/n/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
So that we can allocate just the notes->src->cyc_hist, that, unlike
notes->src->histograms, is not per event, and in paths where we
need to lazily allocate notes->src->cyc_hist we don't have the
number of events handy to also allocate ->histograms.
Cc: Adrian Hunter <[email protected]>
Cc: David Ahern <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Wang Nan <[email protected]>
Link: https://lkml.kernel.org/n/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
It only operates on the notes->src->cyc_hist, just pass that to it.
Cc: Adrian Hunter <[email protected]>
Cc: David Ahern <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Wang Nan <[email protected]>
Link: https://lkml.kernel.org/n/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
The code gets shorter and we'll be able to use evsel->evlist in a
followup patch.
Cc: Adrian Hunter <[email protected]>
Cc: David Ahern <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Wang Nan <[email protected]>
Link: https://lkml.kernel.org/n/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
Those functions always check if the argument is NULL before trying to
grab a reference count, and also will return the received object, so, to
make code more compact, no need to check for NULL.
Cc: Adrian Hunter <[email protected]>
Cc: David Ahern <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Krister Johansen <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Wang Nan <[email protected]>
Link: https://lkml.kernel.org/n/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
By taking advantage that __get() routines return the pointer to the
object for which a reference count is being get.
Cc: Adrian Hunter <[email protected]>
Cc: David Ahern <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Stephane Eranian <[email protected]>
Cc: Wang Nan <[email protected]>
Link: https://lkml.kernel.org/n/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
The __get() idiom returns a reference count for the object passed, i.e.
all functions of this type return the object passed, so take advantage
of that to make the code more compact.
Cc: Adrian Hunter <[email protected]>
Cc: David Ahern <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Masami Hiramatsu <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Wang Nan <[email protected]>
Link: https://lkml.kernel.org/n/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
In c68677014bac ("perf tools: Remove support for command aliases") we
removed the only remaining use of a function provided by these files, so
ditch it.
Cc: Adrian Hunter <[email protected]>
Cc: David Ahern <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Wang Nan <[email protected]>
Link: https://lkml.kernel.org/n/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
To pick up fixes.
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
Syscall name_to_handle_at() can be used to get cgroup id
for a particular cgroup path in user space. The selftest
got cgroup id from both user and kernel, and compare to
ensure they are equal to each other.
Acked-by: Alexei Starovoitov <[email protected]>
Signed-off-by: Yonghong Song <[email protected]>
Signed-off-by: Alexei Starovoitov <[email protected]>
|
|
Sync kernel uapi/linux/bpf.h with tools uapi/linux/bpf.h.
Also add the necessary helper define in bpf_helpers.h.
Acked-by: Alexei Starovoitov <[email protected]>
Signed-off-by: Yonghong Song <[email protected]>
Signed-off-by: Alexei Starovoitov <[email protected]>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux into perf/urgent
Pull perf/urgent fixes from Carvalho de Melo:
- Update prctl and cpufeatures.h tools/ copies with the kernel sources
originals, which makes 'perf trace' know about the new prctl options
for speculation control and silences the build warnings (Arnaldo Carvalho de Melo)
- Update insn.h in Intel-PT instruction decoder with its original from from the
kernel sources, to silence build warnings, no effect on the actual tools this
time around (Arnaldo Carvalho de Melo)
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
Signed-off-by: Ingo Molnar <[email protected]>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull perf tooling fixes from Thomas Gleixner:
- fix 'perf test Session topology' segfault on s390 (Thomas Richter)
- fix NULL return handling in bpf__prepare_load() (YueHaibing)
- fix indexing on Coresight ETM packet queue decoder (Mathieu Poirier)
- fix perf.data format description of NRCPUS header (Arnaldo Carvalho
de Melo)
- update perf.data documentation section on cpu topology
- handle uncore event aliases in small groups properly (Kan Liang)
- add missing perf_sample.addr into python sample dictionary (Leo Yan)
* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
perf tools: Fix perf.data format description of NRCPUS header
perf script python: Add addr into perf sample dict
perf data: Update documentation section on cpu topology
perf cs-etm: Fix indexing for decoder packet queue
perf bpf: Fix NULL return handling in bpf__prepare_load()
perf test: "Session topology" dumps core on s390
perf parse-events: Handle uncore event aliases in small groups properly
|
|
Pull in recent changes from include/uapi/linux/bpf.h.
Signed-off-by: Daniel Borkmann <[email protected]>
Acked-by: Alexei Starovoitov <[email protected]>
Acked-by: Song Liu <[email protected]>
Signed-off-by: Alexei Starovoitov <[email protected]>
|
|
Range is 0-7, not 0-9, otherwise parser silently excludes it from the
strtol() rather than throwing an error.
Reported-by: Marc Boschma <[email protected]>
Signed-off-by: Daniel Borkmann <[email protected]>
Acked-by: Alexei Starovoitov <[email protected]>
Acked-by: Song Liu <[email protected]>
Signed-off-by: Alexei Starovoitov <[email protected]>
|
|
Add several test cases where the same or different map pointers
originate from different paths in the program and execute a map
lookup or tail call at a common location.
Signed-off-by: Daniel Borkmann <[email protected]>
Acked-by: Alexei Starovoitov <[email protected]>
Acked-by: Song Liu <[email protected]>
Signed-off-by: Alexei Starovoitov <[email protected]>
|
|
Filling in the padding slot in the bpf structure as a bug fix in 'ne'
overlapped with actually using that padding area for something in
'net-next'.
Signed-off-by: David S. Miller <[email protected]>
|
|
This tests perf hardware breakpoints (ie PERF_TYPE_BREAKPOINT) on
powerpc.
Signed-off-by: Michael Neuling <[email protected]>
Signed-off-by: Michael Ellerman <[email protected]>
|
|
|
|
The t->type in BTF_KIND_FWD is not used. It must be 0.
This patch ensures that and also adds a test case in test_btf.c
Signed-off-by: Martin KaFai Lau <[email protected]>
Signed-off-by: Alexei Starovoitov <[email protected]>
|
|
This patch ensures array's t->size is 0.
The array size is decided by its individual elem's size and the
number of elements. Hence, t->size is not used and
it must be 0.
A test case is added to test_btf.c
Signed-off-by: Martin KaFai Lau <[email protected]>
Signed-off-by: Alexei Starovoitov <[email protected]>
|
|
Print values of test options like apply, cork, start, end so that
individual failed tests can be identified for manual run
Acked-by: John Fastabend <[email protected]>
Signed-off-by: Prashant Bhole <[email protected]>
Signed-off-by: Daniel Borkmann <[email protected]>
|
|
When data verification is enabled, some tests fail because verification is done
incorrectly. Following changes fix it.
- Identify the size of data block to be verified
- Reset verification counter when data block size is reached
- Fixed the value printed in case of verfication failure
Fixes: 16962b2404ac ("bpf: sockmap, add selftests")
Acked-by: John Fastabend <[email protected]>
Signed-off-by: Prashant Bhole <[email protected]>
Signed-off-by: Daniel Borkmann <[email protected]>
|
|
Currently 10us delay is too low for many tests to succeed. It needs to
be increased. Also, many corked tests are expected to hit rx timeout
irrespective of timeout value.
- This patch sets 1000usec timeout value for corked tests because less
than that causes broken-pipe error in tx thread. Also sets 1 second
timeout for all other tests because less than that results in RX
timeout
- tests with apply=1 and higher number of iterations were taking lot
of time. This patch reduces test run time by reducing iterations.
real 0m12.968s
user 0m0.219s
sys 0m14.337s
Fixes: a18fda1a62c3 ("bpf: reduce runtime of test_sockmap tests")
Signed-off-by: Prashant Bhole <[email protected]>
Acked-by: John Fastabend <[email protected]>
Signed-off-by: Daniel Borkmann <[email protected]>
|
|
In case of selftest mode, temporary cgroup environment is created but
cgroup is not joined. It causes test failures. Fixed by joining the
cgroup
Fixes: 16962b2404ac ("bpf: sockmap, add selftests")
Acked-by: John Fastabend <[email protected]>
Signed-off-by: Prashant Bhole <[email protected]>
Signed-off-by: Daniel Borkmann <[email protected]>
|
|
Test failures are not identified because exit code of RX/TX threads
is not checked. Also threads are not returning correct exit code.
- Return exit code from threads depending on test execution status
- In main thread, check the exit code of RX/TX threads
- Skip error checking for corked tests as they are expected to timeout
Fixes: 16962b2404ac ("bpf: sockmap, add selftests")
Signed-off-by: Prashant Bhole <[email protected]>
Acked-by: John Fastabend <[email protected]>
Signed-off-by: Daniel Borkmann <[email protected]>
|